From: Lubomir Rintel <lkundrak@v3.sk>
To: arm@kernel.org, Olof Johansson <olof@lixom.net>,
Arnd Bergmann <arnd@arndb.de>
Cc: Eric Miao <eric.y.miao@gmail.com>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Robert Jarzmik <robert.jarzmik@free.fr>,
Pavel Machek <pavel@ucw.cz>, James Cameron <quozl@laptop.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH v4 10/20] DT: marvell,mmp2: Add SSP controllers
Date: Wed, 28 Nov 2018 18:53:14 +0100 [thread overview]
Message-ID: <20181128175324.163202-11-lkundrak@v3.sk> (raw)
In-Reply-To: <20181128175324.163202-1-lkundrak@v3.sk>
Despite Marvel keeps their base addresses secret there's a good chance
they're actually correct.
SSP1 and SSP3 bases were taken from OLPC 1.75: OpenFirmware and kernel
respectively. SSP2 and SSP4 addresses are from James Cameron who actually
has a copy of the data sheet.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
Changes since v2:
- Added SSP2 and SSP4 (thanks James Cameron <quozl@laptop.org>)
Changes since v1:
- Dropped the aliases
arch/arm/boot/dts/mmp2.dtsi | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 0c5a51b98c3f..ee03e0846740 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -346,6 +346,38 @@
resets = <&soc_clocks MMP2_CLK_RTC>;
status = "disabled";
};
+
+ ssp1: ssp@d4035000 {
+ compatible = "marvell,mmp2-ssp";
+ reg = <0xd4035000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP0>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ ssp2: ssp@d4036000 {
+ compatible = "marvell,mmp2-ssp";
+ reg = <0xd4036000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP1>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ ssp3: ssp@d4037000 {
+ compatible = "marvell,mmp2-ssp";
+ reg = <0xd4037000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP2>;
+ interrupts = <20>;
+ status = "disabled";
+ };
+
+ ssp4: ssp@d4039000 {
+ compatible = "marvell,mmp2-ssp";
+ reg = <0xd4039000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP3>;
+ interrupts = <21>;
+ status = "disabled";
+ };
};
soc_clocks: clocks{
--
2.19.1
next prev parent reply other threads:[~2018-11-28 17:54 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-28 17:53 [PATCH v4 0/20] MMP platform fixes Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 01/20] dt-bindings: mrvl,mmp-timer: add clock Lubomir Rintel
2018-11-30 23:10 ` Olof Johansson
2018-11-28 17:53 ` [PATCH v4 02/20] DT: marvell,mmp2: fix the gpio interrupt cell number Lubomir Rintel
2018-11-30 23:11 ` Olof Johansson
2018-11-28 17:53 ` [PATCH v4 03/20] DT: marvell,mmp2: give gpio node a name Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 04/20] DT: marvell,mmp2: add clock to the timer Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 05/20] DT: marvell,mmp2: add MMC controllers Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 06/20] DT: marvell,mmp2: fix TWSI2 Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 07/20] DT: marvell,mmp2: add more TWSI controllers Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 08/20] DT: marvell,mmp2: add OTG PHY Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 09/20] DT: marvell,mmp2: add USB OTG host controller Lubomir Rintel
2018-11-28 17:53 ` Lubomir Rintel [this message]
2018-11-28 17:53 ` [PATCH v4 11/20] irqchip/mmp: only touch the PJ4 & FIQ bits on enable/disable Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 12/20] irqchip/mmp: do not use of_address_to_resource() to get mux regs Lubomir Rintel
2018-12-01 12:59 ` Pavel Machek
2018-11-28 17:53 ` [PATCH v4 13/20] gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2 Lubomir Rintel
2018-11-28 17:53 ` [PATCH v4 14/20] ARM: mmp/mmp2: use cpu_is_pj4() instead of cpu_is_mmp2() Lubomir Rintel
2018-11-28 21:34 ` Arnd Bergmann
2018-11-28 17:53 ` [PATCH v4 15/20] ARM: mmp2: initialize clocks before the timer Lubomir Rintel
2018-11-30 23:59 ` Olof Johansson
2018-11-28 17:53 ` [PATCH v4 16/20] ARM: mmp/mmp2: dt: enable the clock Lubomir Rintel
2018-11-30 23:59 ` Olof Johansson
2018-11-28 17:53 ` [PATCH v4 17/20] ARM: mmp: add a pxa-usb-phy device Lubomir Rintel
2018-11-30 23:59 ` Olof Johansson
2018-11-28 17:53 ` [PATCH v4 18/20] ARM: mmp: add an instance of pxa-usb-phy to ttc_dkb and aspenite Lubomir Rintel
2018-12-01 0:00 ` Olof Johansson
2018-11-28 17:53 ` [PATCH v4 19/20] USB: phy-mv-usb: use phy-pxa-usb Lubomir Rintel
2018-11-30 23:42 ` Olof Johansson
2018-12-01 13:10 ` Pavel Machek
2018-12-02 19:07 ` Olof Johansson
2018-11-28 17:53 ` [PATCH v4 20/20] USB: gadget: mv-udc: " Lubomir Rintel
2018-11-30 23:42 ` Olof Johansson
2018-11-28 21:39 ` [PATCH v4 0/20] MMP platform fixes Arnd Bergmann
2018-11-28 21:44 ` Pavel Machek
2018-11-30 23:44 ` Olof Johansson
2018-12-02 12:07 ` Lubomir Rintel
2018-12-02 22:29 ` Pavel Machek
2018-12-02 23:24 ` James Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181128175324.163202-11-lkundrak@v3.sk \
--to=lkundrak@v3.sk \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=eric.y.miao@gmail.com \
--cc=haojian.zhuang@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=olof@lixom.net \
--cc=pavel@ucw.cz \
--cc=quozl@laptop.org \
--cc=robert.jarzmik@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).