* [PATCH] dt-bindings: iio: accel: use a generic node name for lis302
@ 2018-12-03 11:47 Lubomir Rintel
2018-12-08 11:09 ` Jonathan Cameron
0 siblings, 1 reply; 2+ messages in thread
From: Lubomir Rintel @ 2018-12-03 11:47 UTC (permalink / raw)
To: Jonathan Cameron
Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler,
Rob Herring, Mark Rutland, linux-iio, devicetree, linux-kernel,
Lubomir Rintel
The example should follow the practice or using a generic node name
instead of the precise programming model, as recommended by the DTSpec.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
Documentation/devicetree/bindings/iio/accel/lis302.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt
index dfdce67826ba..764e28ec1a0a 100644
--- a/Documentation/devicetree/bindings/iio/accel/lis302.txt
+++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt
@@ -64,7 +64,7 @@ Optional properties for all bus drivers:
Example for a SPI device node:
- lis302@0 {
+ accelerometer@0 {
compatible = "st,lis302dl-spi";
reg = <0>;
spi-max-frequency = <1000000>;
@@ -89,7 +89,7 @@ Example for a SPI device node:
Example for a I2C device node:
- lis331dlh: lis331dlh@18 {
+ lis331dlh: accelerometer@18 {
compatible = "st,lis331dlh", "st,lis3lv02d";
reg = <0x18>;
Vdd-supply = <&lis3_reg>;
--
2.19.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] dt-bindings: iio: accel: use a generic node name for lis302
2018-12-03 11:47 [PATCH] dt-bindings: iio: accel: use a generic node name for lis302 Lubomir Rintel
@ 2018-12-08 11:09 ` Jonathan Cameron
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Cameron @ 2018-12-08 11:09 UTC (permalink / raw)
To: Lubomir Rintel
Cc: Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler,
Rob Herring, Mark Rutland, linux-iio, devicetree, linux-kernel
On Mon, 3 Dec 2018 12:47:40 +0100
Lubomir Rintel <lkundrak@v3.sk> wrote:
> The example should follow the practice or using a generic node name
> instead of the precise programming model, as recommended by the DTSpec.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Applied to the togreg branch of iio.git and pushed out as testing
to be largely ignored.
Thanks,
Jonathan
> ---
> Documentation/devicetree/bindings/iio/accel/lis302.txt | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt
> index dfdce67826ba..764e28ec1a0a 100644
> --- a/Documentation/devicetree/bindings/iio/accel/lis302.txt
> +++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt
> @@ -64,7 +64,7 @@ Optional properties for all bus drivers:
>
> Example for a SPI device node:
>
> - lis302@0 {
> + accelerometer@0 {
> compatible = "st,lis302dl-spi";
> reg = <0>;
> spi-max-frequency = <1000000>;
> @@ -89,7 +89,7 @@ Example for a SPI device node:
>
> Example for a I2C device node:
>
> - lis331dlh: lis331dlh@18 {
> + lis331dlh: accelerometer@18 {
> compatible = "st,lis331dlh", "st,lis3lv02d";
> reg = <0x18>;
> Vdd-supply = <&lis3_reg>;
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-12-08 11:09 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-03 11:47 [PATCH] dt-bindings: iio: accel: use a generic node name for lis302 Lubomir Rintel
2018-12-08 11:09 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).