From: Chen-Yu Tsai <wens@csie.org>
To: Linus Walleij <linus.walleij@linaro.org>,
Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
linux-sunxi@googlegroups.com,
Jagan Teki <jagan@amarulasolutions.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] pinctrl: sunxi: a64: Rename function csi0 to csi
Date: Mon, 3 Dec 2018 23:40:59 +0800 [thread overview]
Message-ID: <20181203154100.4280-2-wens@csie.org> (raw)
In-Reply-To: <20181203154100.4280-1-wens@csie.org>
The A64 only has one CSI (camera sensor interface) controller. The
datasheet also lists the function as CSI_XXX instead of CSI0_XXX.
Rename the function names now before any there are any users.
Fixes: 96851d391d02 ("drivers: pinctrl: add driver for Allwinner A64 SoC")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c | 28 +++++++++++-----------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
index f5f77432ce6f..8b974b2a2486 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
@@ -323,71 +323,71 @@ static const struct sunxi_desc_pin a64_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 0),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0"), /* PCK */
+ SUNXI_FUNCTION(0x2, "csi"), /* PCK */
SUNXI_FUNCTION(0x4, "ts0")), /* CLK */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 1),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0"), /* CK */
+ SUNXI_FUNCTION(0x2, "csi"), /* CK */
SUNXI_FUNCTION(0x4, "ts0")), /* ERR */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 2),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0"), /* HSYNC */
+ SUNXI_FUNCTION(0x2, "csi"), /* HSYNC */
SUNXI_FUNCTION(0x4, "ts0")), /* SYNC */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 3),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0"), /* VSYNC */
+ SUNXI_FUNCTION(0x2, "csi"), /* VSYNC */
SUNXI_FUNCTION(0x4, "ts0")), /* DVLD */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 4),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0"), /* D0 */
+ SUNXI_FUNCTION(0x2, "csi"), /* D0 */
SUNXI_FUNCTION(0x4, "ts0")), /* D0 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 5),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0"), /* D1 */
+ SUNXI_FUNCTION(0x2, "csi"), /* D1 */
SUNXI_FUNCTION(0x4, "ts0")), /* D1 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 6),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0"), /* D2 */
+ SUNXI_FUNCTION(0x2, "csi"), /* D2 */
SUNXI_FUNCTION(0x4, "ts0")), /* D2 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 7),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0"), /* D3 */
+ SUNXI_FUNCTION(0x2, "csi"), /* D3 */
SUNXI_FUNCTION(0x4, "ts0")), /* D3 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 8),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0"), /* D4 */
+ SUNXI_FUNCTION(0x2, "csi"), /* D4 */
SUNXI_FUNCTION(0x4, "ts0")), /* D4 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 9),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0"), /* D5 */
+ SUNXI_FUNCTION(0x2, "csi"), /* D5 */
SUNXI_FUNCTION(0x4, "ts0")), /* D5 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 10),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0"), /* D6 */
+ SUNXI_FUNCTION(0x2, "csi"), /* D6 */
SUNXI_FUNCTION(0x4, "ts0")), /* D6 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 11),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0"), /* D7 */
+ SUNXI_FUNCTION(0x2, "csi"), /* D7 */
SUNXI_FUNCTION(0x4, "ts0")), /* D7 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 12),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0")), /* SCK */
+ SUNXI_FUNCTION(0x2, "csi")), /* SCK */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 13),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "csi0")), /* SDA */
+ SUNXI_FUNCTION(0x2, "csi")), /* SDA */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 14),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
--
2.20.0.rc1
next prev parent reply other threads:[~2018-12-03 15:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-03 15:40 [PATCH 0/2] pinctrl: sunxi: a64: Drop numeral from csi0/ts0 Chen-Yu Tsai
2018-12-03 15:40 ` Chen-Yu Tsai [this message]
2018-12-03 15:41 ` [PATCH 2/2] pinctrl: sunxi: a64: Rename function ts0 to ts Chen-Yu Tsai
2018-12-03 15:45 ` [PATCH 0/2] pinctrl: sunxi: a64: Drop numeral from csi0/ts0 Maxime Ripard
2018-12-07 12:30 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181203154100.4280-2-wens@csie.org \
--to=wens@csie.org \
--cc=jagan@amarulasolutions.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).