linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
To: Sean Young <sean@mess.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>,
	Nathan Chancellor <natechancellor@gmail.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-media@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] [media] dib7000p: Remove dead code
Date: Tue, 4 Dec 2018 09:57:14 -0200	[thread overview]
Message-ID: <20181204095714.60ee5b95@coco.lan> (raw)
In-Reply-To: <20181204102639.3qsvfxrzmsvybiop@gofer.mess.org>

Em Tue, 4 Dec 2018 10:26:40 +0000
Sean Young <sean@mess.org> escreveu:

> On Mon, Sep 17, 2018 at 07:39:36PM -0300, Mauro Carvalho Chehab wrote:
> > Em Mon, 17 Sep 2018 10:58:32 -0700
> > Nick Desaulniers <ndesaulniers@google.com> escreveu:
> >   
> > > On Fri, Sep 14, 2018 at 10:47 PM Nathan Chancellor
> > > <natechancellor@gmail.com> wrote:  
> > > >
> > > > Clang warns that 'interleaving' is assigned to itself in this function.
> > > >
> > > > drivers/media/dvb-frontends/dib7000p.c:1874:15: warning: explicitly
> > > > assigning value of variable of type 'int' to itself [-Wself-assign]
> > > >         interleaving = interleaving;
> > > >         ~~~~~~~~~~~~ ^ ~~~~~~~~~~~~
> > > > 1 warning generated.
> > > >
> > > > It's correct. Just removing the self-assignment would sufficiently hide
> > > > the warning but all of this code is dead because 'tmp' is zero due to
> > > > being multiplied by zero. This doesn't appear to be an issue with
> > > > dib8000, which this code was copied from in commit 041ad449683b
> > > > ("[media] dib7000p: Add DVBv5 stats support").
> > > >
> > > > Reported-by: Nick Desaulniers <ndesaulniers@google.com>
> > > > Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
> > > > ---
> > > >  drivers/media/dvb-frontends/dib7000p.c | 10 ++--------
> > > >  1 file changed, 2 insertions(+), 8 deletions(-)
> > > >
> > > > diff --git a/drivers/media/dvb-frontends/dib7000p.c b/drivers/media/dvb-frontends/dib7000p.c
> > > > index 58387860b62d..25843658fc68 100644
> > > > --- a/drivers/media/dvb-frontends/dib7000p.c
> > > > +++ b/drivers/media/dvb-frontends/dib7000p.c
> > > > @@ -1800,9 +1800,8 @@ static u32 dib7000p_get_time_us(struct dvb_frontend *demod)    
> > > 
> > > Something looks wrong here (with this function).  The patch is no
> > > functional change, since as you point out `interleaving` is
> > > initialized to 0, then never updated before read, but I think there's
> > > an underlying bug here that should be fixed differently.  Thanks for
> > > the patch though, as it does raise the question.
> > > 
> > > dib7000p_get_time_us has this comment above it:
> > > 
> > >   1798 /* FIXME: may require changes - this one was borrowed from
> > > dib8000 */  
> > 
> > The goal of dib7000p_get_time_us() is to estimate how much time it
> > takes, with current tuning parameters, to have a certain number of
> > DVB-T packets. This is used for block error count. That's said,
> > on a quick look, it seems that the code is not right on many ways.
> > 
> > It should be aligned with the amount of data it is required for
> > dib7000 to update the block/bit error counters. There are two kinds
> > of implementation:
> > 
> > 1) the frontend has an internal counter that it is shifted and made
> >    available to the driver after a certain amount of received data
> >    (usually in the order of 10^5 to 10^7 bits);
> > 
> > 2) the frontend has an internal timer that shifts the data from its
> >    internal counter after a certain amount of time (usually at the
> >    seconds range).
> > 
> > Different vendors opt for either one of the strategy. Some updates
> > a counter with the amount of bits taken. Unfortunately, this is not
> > the case of those dib* frontends. So, the Kernel has to estimate
> > it, based on the tuning parameters.
> > 
> > From the code, it seems that, for block errors, it waits for 1,250,000
> > bits to arrive (e. g. about 766 packets), so, it uses type (1) strategy:
> > 
> >                 /* Estimate the number of packets based on bitrate */
> >                 if (!time_us)
> >                         time_us = dib7000p_get_time_us(demod);
> > 
> >                 if (time_us) {
> >                         blocks = 1250000ULL * 1000000ULL;	// the multiply here is to convert to microsseconds...
> >                         do_div(blocks, time_us * 8 * 204);	// As here it divides by the time in microsseconds
> >                         c->block_count.stat[0].scale = FE_SCALE_COUNTER;
> >                         c->block_count.stat[0].uvalue += blocks;
> >                 }
> > 
> > For BER, the logic assumes that the bit error count should be divided
> > by 10^-8:
> > 
> >                 c->post_bit_count.stat[0].uvalue += 100000000;
> > 
> > and the counter is updated every second. So, it uses (2).
> >   
> > > 
> > > Wondering if it has the same bug, it seems it does not:
> > > drivers/media/dvb-frontends/dib8000.c#dib8000_get_time_us():3986
> > > 
> > > dib8000_get_time_us() seems to loop over multiple layers, and then
> > > assigns interleaving to the final layers interleaving (that looks like
> > > loop invariant code to me).
> > > 
> > > Mauro, should dib7000p_get_time_us() use c->layer[???].interleaving?  
> > 
> > I don't think that time interleaving would affect the bit rate.
> > I suspect that the dead code on dib8000 is just a dead code.
> >   
> > > I don't see a single reference to `layer` in
> > > drivers/media/dvb-frontends/dib7000p.c.  
> > 
> > Layers are specific for ISDB-T, but I think DVB-T (or at least DVB-T2)
> > may use time interleaving. 
> > 
> > Yet, as I said, the goal is to estimate the streaming bit rate. 
> > 
> > I don't remember anymore from where the dib8000 formula came.
> > 
> > My guts tell that time interleaving shouldn't do much changes (if any)
> > to the bit rate. I suspect that removing the dead code is likely
> > OK, but I'll try to see if I can find something related to where this
> > formula came.  
> 
> So we have two issues. One is the clang issue and clearly the code needs
> fixing up. The second issue is that we're not sure about the algorithm;
> I've been reading up on mpeg-ts but I'm not anywhere near getting to an
> answer on this.
> 
> How about we merge a patch which just fixes the clang issue and leave
> the rest of the code as-is for now?

I'm ok with that, but it would be better to add a FIXME note somewhere.

> 
> Thanks,
> 
> Sean
> 
> ---
> From c6e4c5f514c38511d2054c69f7b103e98c520af4 Mon Sep 17 00:00:00 2001
> From: Sean Young <sean@mess.org>
> Date: Tue, 4 Dec 2018 09:59:10 +0000
> Subject: [PATCH v2] media: dib7000p: Remove dead code
> 
> Clang warns that 'interleaving' is assigned to itself in this function.
> 
> drivers/media/dvb-frontends/dib7000p.c:1874:15: warning: explicitly
> assigning value of variable of type 'int' to itself [-Wself-assign]
>         interleaving = interleaving;
>         ~~~~~~~~~~~~ ^ ~~~~~~~~~~~~
> 1 warning generated.
> 
> Just remove the self-assign and leave existing code in place for now.
> 
> Reported-by: Nick Desaulniers <ndesaulniers@google.com>
> Signed-off-by: Sean Young <sean@mess.org>
> ---
>  drivers/media/dvb-frontends/dib7000p.c | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/drivers/media/dvb-frontends/dib7000p.c b/drivers/media/dvb-frontends/dib7000p.c
> index 58387860b62d..cd84320c61c9 100644
> --- a/drivers/media/dvb-frontends/dib7000p.c
> +++ b/drivers/media/dvb-frontends/dib7000p.c
> @@ -1871,8 +1871,6 @@ static u32 dib7000p_get_time_us(struct dvb_frontend *demod)
>  		break;
>  	}
>  
> -	interleaving = interleaving;
> -
>  	denom = bits_per_symbol * rate_num * fft_div * 384;

something like:

	/* 
	 * FIXME: check if the math makes sense. If so, fill the
	 * interleaving var.
	 */
>  
>  	/* If calculus gets wrong, wait for 1s for the next stats */



Thanks,
Mauro

  reply	other threads:[~2018-12-04 11:57 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-15  5:47 Nathan Chancellor
2018-09-17 17:58 ` Nick Desaulniers
2018-09-17 22:39   ` Mauro Carvalho Chehab
2018-09-19 18:55     ` Nick Desaulniers
2018-10-25 18:09     ` Nathan Chancellor
2018-12-04 10:26     ` Sean Young
2018-12-04 11:57       ` Mauro Carvalho Chehab [this message]
2018-12-04 13:39         ` Sean Young
2018-12-04 18:54           ` Nick Desaulniers
2018-12-04 19:04           ` Nathan Chancellor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181204095714.60ee5b95@coco.lan \
    --to=mchehab+samsung@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=natechancellor@gmail.com \
    --cc=ndesaulniers@google.com \
    --cc=sean@mess.org \
    --subject='Re: [PATCH] [media] dib7000p: Remove dead code' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).