From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Heiko Stuebner <heiko@sntech.de>
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, mdf@kernel.org,
Heiko Stuebner <heiko.stuebner@bq.com>
Subject: Re: [PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant
Date: Wed, 5 Dec 2018 23:03:40 +0100 [thread overview]
Message-ID: <20181205220340.soejl65puivnwhz7@earth.universe> (raw)
In-Reply-To: <20181113124753.29948-1-heiko@sntech.de>
[-- Attachment #1: Type: text/plain, Size: 2599 bytes --]
Hi,
On Tue, Nov 13, 2018 at 01:47:53PM +0100, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@bq.com>
>
> The bq24196 is another variant of the bq24190 charger ic.
> Its register set is identical to the bq24192 and it even reuses
> the same part number (0x5).
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
> ---
Thanks, queued.
-- Sebastian
> This should go on top of the bq24192 support patches from Brian Masney /
> Jonathan Marek [0]
>
> [0] https://patchwork.kernel.org/patch/10663409/
>
> changes in v2:
> - add missing compatible to dt-binding
>
> Documentation/devicetree/bindings/power/supply/bq24190.txt | 1 +
> drivers/power/supply/bq24190_charger.c | 4 +++-
> 2 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> index c8ac028bd3c7..ffe2be408bb6 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq24190.txt
> +++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> @@ -5,6 +5,7 @@ Required properties:
> * "ti,bq24190"
> * "ti,bq24192"
> * "ti,bq24192i"
> + * "ti,bq24196"
> - reg: integer, I2C address of the charger.
> - interrupts[-extended]: configuration for charger INT pin.
>
> diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
> index 4e64e6ac95c5..effa7c3c21e6 100644
> --- a/drivers/power/supply/bq24190_charger.c
> +++ b/drivers/power/supply/bq24190_charger.c
> @@ -143,7 +143,7 @@
> #define BQ24190_REG_VPRS_PN_MASK (BIT(5) | BIT(4) | BIT(3))
> #define BQ24190_REG_VPRS_PN_SHIFT 3
> #define BQ24190_REG_VPRS_PN_24190 0x4
> -#define BQ24190_REG_VPRS_PN_24192 0x5 /* Also 24193 */
> +#define BQ24190_REG_VPRS_PN_24192 0x5 /* Also 24193, 24196 */
> #define BQ24190_REG_VPRS_PN_24192I 0x3
> #define BQ24190_REG_VPRS_TS_PROFILE_MASK BIT(2)
> #define BQ24190_REG_VPRS_TS_PROFILE_SHIFT 2
> @@ -1973,6 +1973,7 @@ static const struct i2c_device_id bq24190_i2c_ids[] = {
> { "bq24190" },
> { "bq24192" },
> { "bq24192i" },
> + { "bq24196" },
> { },
> };
> MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
> @@ -1982,6 +1983,7 @@ static const struct of_device_id bq24190_of_match[] = {
> { .compatible = "ti,bq24190", },
> { .compatible = "ti,bq24192", },
> { .compatible = "ti,bq24192i", },
> + { .compatible = "ti,bq24196", },
> { },
> };
> MODULE_DEVICE_TABLE(of, bq24190_of_match);
> --
> 2.18.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
prev parent reply other threads:[~2018-12-05 22:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-13 12:47 [PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant Heiko Stuebner
2018-11-17 15:44 ` Rob Herring
2018-11-29 14:07 ` Heiko Stuebner
2018-12-05 22:03 ` Sebastian Reichel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181205220340.soejl65puivnwhz7@earth.universe \
--to=sebastian.reichel@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko.stuebner@bq.com \
--cc=heiko@sntech.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mdf@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).