[PATCH 1/2] staging: iio: adc: ad7192: Add clock for external clock reference

[Mircea Caprioru <mircea.caprioru@analog.com>]

This patch adds a clock to the state structure of ad7192 for getting the
external clock frequency. This modifications is in accordance with clock
framework dt bindings documentation.

Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
---
 drivers/staging/iio/adc/ad7192.c | 74 +++++++++++++++++++++-----------
 drivers/staging/iio/adc/ad7192.h |  2 -
 2 files changed, 50 insertions(+), 26 deletions(-)

diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index acdbc07fd259..8a4e6ede42b3 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -6,6 +6,7 @@
  * Licensed under the GPL-2.
  */
 
+#include <linux/clk.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
@@ -156,8 +157,9 @@
 struct ad7192_state {
 	struct regulator		*avdd;
 	struct regulator		*dvdd;
+	struct clk			*mclk;
 	u16				int_vref_mv;
-	u32				mclk;
+	u32				fclk;
 	u32				f_order;
 	u32				mode;
 	u32				conf;
@@ -165,6 +167,7 @@ struct ad7192_state {
 	u8				gpocon;
 	u8				devid;
 	struct mutex			lock;	/* protect sensor state */
+	u8				clock_sel;
 
 	struct ad_sigma_delta		sd;
 };
@@ -250,28 +253,8 @@ static int ad7192_setup(struct ad7192_state *st,
 		dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n",
 			 id);
 
-	switch (pdata->clock_source_sel) {
-	case AD7192_CLK_INT:
-	case AD7192_CLK_INT_CO:
-		st->mclk = AD7192_INT_FREQ_MHZ;
-		break;
-	case AD7192_CLK_EXT_MCLK1_2:
-	case AD7192_CLK_EXT_MCLK2:
-		if (ad7192_valid_external_frequency(pdata->ext_clk_hz)) {
-			st->mclk = pdata->ext_clk_hz;
-			break;
-		}
-		dev_err(&st->sd.spi->dev, "Invalid frequency setting %u\n",
-			pdata->ext_clk_hz);
-		ret = -EINVAL;
-		goto out;
-	default:
-		ret = -EINVAL;
-		goto out;
-	}
-
 	st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) |
-		AD7192_MODE_CLKSRC(pdata->clock_source_sel) |
+		AD7192_MODE_CLKSRC(st->clock_sel) |
 		AD7192_MODE_RATE(480);
 
 	st->conf = AD7192_CONF_GAIN(0);
@@ -499,7 +482,7 @@ static int ad7192_read_raw(struct iio_dev *indio_dev,
 			*val -= 273 * ad7192_get_temp_scale(unipolar);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		*val = st->mclk /
+		*val = st->fclk /
 			(st->f_order * 1024 * AD7192_MODE_RATE(st->mode));
 		return IIO_VAL_INT;
 	}
@@ -546,7 +529,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
 			break;
 		}
 
-		div = st->mclk / (val * st->f_order * 1024);
+		div = st->fclk / (val * st->f_order * 1024);
 		if (div < 1 || div > 1023) {
 			ret = -EINVAL;
 			break;
@@ -625,6 +608,42 @@ static const struct iio_chan_spec ad7193_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(14),
 };
 
+static int ad7192_clock_select(struct spi_device *spi, struct ad7192_state *st)
+{
+	int ret;
+
+	st->clock_sel = AD7192_CLK_EXT_MCLK2;
+	st->mclk = devm_clk_get(&spi->dev, "clk");
+	if (IS_ERR(st->mclk)) {
+		if (PTR_ERR(st->mclk) != -ENOENT)
+			return PTR_ERR(st->mclk);
+
+		/* try xtal option */
+		st->mclk = devm_clk_get(&spi->dev, "xtal");
+		st->clock_sel = AD7192_CLK_EXT_MCLK1_2;
+		if (IS_ERR(st->mclk)) {
+			if (PTR_ERR(st->mclk) != -ENOENT)
+				return PTR_ERR(st->mclk);
+
+			/* use internal clock */
+			st->clock_sel = AD7192_CLK_INT;
+			st->fclk = AD7192_INT_FREQ_MHZ;
+		}
+	}
+	if (st->clock_sel == AD7192_CLK_EXT_MCLK2 ||
+	    st->clock_sel == AD7192_CLK_EXT_MCLK1_2) {
+		ret = clk_prepare_enable(st->mclk);
+		if (ret < 0)
+			return ret;
+
+		st->fclk = clk_get_rate(st->mclk);
+		if (!ad7192_valid_external_frequency(st->fclk))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int ad7192_probe(struct spi_device *spi)
 {
 	const struct ad7192_platform_data *pdata = dev_get_platdata(&spi->dev);
@@ -672,6 +691,10 @@ static int ad7192_probe(struct spi_device *spi)
 		goto error_disable_avdd;
 	}
 
+	ret = ad7192_clock_select(spi, st);
+	if (ret < 0)
+		goto error_clk_disable_unprepare;
+
 	voltage_uv = regulator_get_voltage(st->avdd);
 
 	if (pdata->vref_mv)
@@ -720,6 +743,8 @@ static int ad7192_probe(struct spi_device *spi)
 
 error_remove_trigger:
 	ad_sd_cleanup_buffer_and_trigger(indio_dev);
+error_clk_disable_unprepare:
+	clk_disable_unprepare(st->mclk);
 error_disable_dvdd:
 	regulator_disable(st->dvdd);
 error_disable_avdd:
@@ -735,6 +760,7 @@ static int ad7192_remove(struct spi_device *spi)
 
 	iio_device_unregister(indio_dev);
 	ad_sd_cleanup_buffer_and_trigger(indio_dev);
+	clk_disable_unprepare(st->mclk);
 
 	regulator_disable(st->dvdd);
 	regulator_disable(st->avdd);
diff --git a/drivers/staging/iio/adc/ad7192.h b/drivers/staging/iio/adc/ad7192.h
index 7433a43c2611..3be3ee269ed5 100644
--- a/drivers/staging/iio/adc/ad7192.h
+++ b/drivers/staging/iio/adc/ad7192.h
@@ -33,8 +33,6 @@
 
 struct ad7192_platform_data {
 	u16		vref_mv;
-	u8		clock_source_sel;
-	u32		ext_clk_hz;
 	bool		refin2_en;
 	bool		rej60_en;
 	bool		sinc3_en;
-- 
2.17.1