LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: iommu@lists.linux-foundation.org,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Jesper Dangaard Brouer <brouer@redhat.com>
Cc: "Tariq Toukan" <tariqt@mellanox.com>,
	"Ilias Apalodimas" <ilias.apalodimas@linaro.org>,
	"Toke Høiland-Jørgensen" <toke@toke.dk>,
	"Robin Murphy" <robin.murphy@arm.com>,
	"Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>,
	"Tony Luck" <tony.luck@intel.com>,
	"Fenghua Yu" <fenghua.yu@intel.com>,
	"Marek Szyprowski" <m.szyprowski@samsung.com>,
	"Keith Busch" <keith.busch@intel.com>,
	"Jonathan Derrick" <jonathan.derrick@intel.com>,
	linux-pci@vger.kernel.org, linux-ia64@vger.kernel.org,
	x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 02/15] swiotlb: remove dma_mark_clean
Date: Fri,  7 Dec 2018 11:07:07 -0800
Message-ID: <20181207190720.18517-3-hch@lst.de> (raw)
In-Reply-To: <20181207190720.18517-1-hch@lst.de>

Instead of providing a special dma_mark_clean hook just for ia64, switch
ia64 to use the normal arch_sync_dma_for_cpu hooks instead.

This means that we now also set the PG_arch_1 bit for pages in the
swiotlb buffer, which isn't stricly needed as we will never execute code
out of the swiotlb buffer, but otherwise harmless.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/ia64/Kconfig              |  3 ++-
 arch/ia64/kernel/dma-mapping.c | 20 +++++++++++++++++++-
 arch/ia64/mm/init.c            | 18 +++++++-----------
 drivers/xen/swiotlb-xen.c      | 20 +-------------------
 include/linux/dma-direct.h     |  8 --------
 kernel/dma/swiotlb.c           | 18 +-----------------
 6 files changed, 30 insertions(+), 57 deletions(-)

diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index d6f203658994..c587e3316c38 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -28,7 +28,8 @@ config IA64
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_VIRT_CPU_ACCOUNTING
-	select ARCH_HAS_DMA_MARK_CLEAN
+	select ARCH_HAS_DMA_COHERENT_TO_PFN
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select VIRT_TO_BUS
 	select ARCH_DISCARD_MEMBLOCK
 	select GENERIC_IRQ_PROBE
diff --git a/arch/ia64/kernel/dma-mapping.c b/arch/ia64/kernel/dma-mapping.c
index 7a471d8d67d4..36dd6aa6d759 100644
--- a/arch/ia64/kernel/dma-mapping.c
+++ b/arch/ia64/kernel/dma-mapping.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <linux/dma-mapping.h>
+#include <linux/dma-direct.h>
 #include <linux/swiotlb.h>
 #include <linux/export.h>
 
@@ -16,6 +16,24 @@ const struct dma_map_ops *dma_get_ops(struct device *dev)
 EXPORT_SYMBOL(dma_get_ops);
 
 #ifdef CONFIG_SWIOTLB
+void *arch_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
+{
+	return dma_direct_alloc_pages(dev, size, dma_handle, gfp, attrs);
+}
+
+void arch_dma_free(struct device *dev, size_t size, void *cpu_addr,
+		dma_addr_t dma_addr, unsigned long attrs)
+{
+	dma_direct_free_pages(dev, size, cpu_addr, dma_addr, attrs);
+}
+
+long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr,
+		dma_addr_t dma_addr)
+{
+	return page_to_pfn(virt_to_page(cpu_addr));
+}
+
 void __init swiotlb_dma_init(void)
 {
 	dma_ops = &swiotlb_dma_ops;
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index d5e12ff1d73c..2c51733f1dfd 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -71,18 +71,14 @@ __ia64_sync_icache_dcache (pte_t pte)
  * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to
  * flush them when they get mapped into an executable vm-area.
  */
-void
-dma_mark_clean(void *addr, size_t size)
+void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
+		size_t size, enum dma_data_direction dir)
 {
-	unsigned long pg_addr, end;
-
-	pg_addr = PAGE_ALIGN((unsigned long) addr);
-	end = (unsigned long) addr + size;
-	while (pg_addr + PAGE_SIZE <= end) {
-		struct page *page = virt_to_page(pg_addr);
-		set_bit(PG_arch_1, &page->flags);
-		pg_addr += PAGE_SIZE;
-	}
+	unsigned long pfn = __phys_to_pfn(paddr);
+
+	do {
+		set_bit(PG_arch_1, &pfn_to_page(pfn)->flags);
+	} while (++pfn <= __phys_to_pfn(paddr + size - 1));
 }
 
 inline void
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 833e80b46eb2..989cf872b98c 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -441,21 +441,8 @@ static void xen_unmap_single(struct device *hwdev, dma_addr_t dev_addr,
 	xen_dma_unmap_page(hwdev, dev_addr, size, dir, attrs);
 
 	/* NOTE: We use dev_addr here, not paddr! */
-	if (is_xen_swiotlb_buffer(dev_addr)) {
+	if (is_xen_swiotlb_buffer(dev_addr))
 		swiotlb_tbl_unmap_single(hwdev, paddr, size, dir, attrs);
-		return;
-	}
-
-	if (dir != DMA_FROM_DEVICE)
-		return;
-
-	/*
-	 * phys_to_virt doesn't work with hihgmem page but we could
-	 * call dma_mark_clean() with hihgmem page here. However, we
-	 * are fine since dma_mark_clean() is null on POWERPC. We can
-	 * make dma_mark_clean() take a physical address if necessary.
-	 */
-	dma_mark_clean(phys_to_virt(paddr), size);
 }
 
 static void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
@@ -493,11 +480,6 @@ xen_swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
 
 	if (target == SYNC_FOR_DEVICE)
 		xen_dma_sync_single_for_device(hwdev, dev_addr, size, dir);
-
-	if (dir != DMA_FROM_DEVICE)
-		return;
-
-	dma_mark_clean(phys_to_virt(paddr), size);
 }
 
 void
diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
index 6e5a47ae7d64..1aa73f4907ae 100644
--- a/include/linux/dma-direct.h
+++ b/include/linux/dma-direct.h
@@ -48,14 +48,6 @@ static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
 	return __sme_clr(__dma_to_phys(dev, daddr));
 }
 
-#ifdef CONFIG_ARCH_HAS_DMA_MARK_CLEAN
-void dma_mark_clean(void *addr, size_t size);
-#else
-static inline void dma_mark_clean(void *addr, size_t size)
-{
-}
-#endif /* CONFIG_ARCH_HAS_DMA_MARK_CLEAN */
-
 u64 dma_direct_get_required_mask(struct device *dev);
 void *dma_direct_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		gfp_t gfp, unsigned long attrs);
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index 19ba8e473d71..2e126bac5d7d 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -706,21 +706,8 @@ void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 	    (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
 		arch_sync_dma_for_cpu(hwdev, paddr, size, dir);
 
-	if (is_swiotlb_buffer(paddr)) {
+	if (is_swiotlb_buffer(paddr))
 		swiotlb_tbl_unmap_single(hwdev, paddr, size, dir, attrs);
-		return;
-	}
-
-	if (dir != DMA_FROM_DEVICE)
-		return;
-
-	/*
-	 * phys_to_virt doesn't work with hihgmem page but we could
-	 * call dma_mark_clean() with hihgmem page here. However, we
-	 * are fine since dma_mark_clean() is null on POWERPC. We can
-	 * make dma_mark_clean() take a physical address if necessary.
-	 */
-	dma_mark_clean(phys_to_virt(paddr), size);
 }
 
 /*
@@ -750,9 +737,6 @@ swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
 
 	if (!dev_is_dma_coherent(hwdev) && target == SYNC_FOR_DEVICE)
 		arch_sync_dma_for_device(hwdev, paddr, size, dir);
-
-	if (!is_swiotlb_buffer(paddr) && dir == DMA_FROM_DEVICE)
-		dma_mark_clean(phys_to_virt(paddr), size);
 }
 
 void
-- 
2.19.1


  parent reply index

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-07 19:07 [RFC] avoid indirect calls for DMA direct mappings v2 Christoph Hellwig
2018-12-07 19:07 ` [PATCH 01/15] swiotlb: remove SWIOTLB_MAP_ERROR Christoph Hellwig
2018-12-07 19:07 ` Christoph Hellwig [this message]
2019-01-02 21:53   ` [PATCH 02/15] swiotlb: remove dma_mark_clean Tony Luck
2019-01-03  7:23     ` Christoph Hellwig
2019-01-03 17:35       ` Tony Luck
2019-01-04  8:09         ` Christoph Hellwig
2018-12-07 19:07 ` [PATCH 03/15] dma-direct: improve addressability error reporting Christoph Hellwig
2018-12-07 19:07 ` [PATCH 04/15] dma-direct: use dma_direct_map_page to implement dma_direct_map_sg Christoph Hellwig
2018-12-07 19:07 ` [PATCH 05/15] dma-direct: merge swiotlb_dma_ops into the dma_direct code Christoph Hellwig
2018-12-07 19:07 ` [PATCH 06/15] dma-mapping: simplify the dma_sync_single_range_for_{cpu,device} implementation Christoph Hellwig
2018-12-07 19:07 ` [PATCH 07/15] dma-mapping: merge dma_unmap_page_attrs and dma_unmap_single_attrs Christoph Hellwig
2018-12-07 19:07 ` [PATCH 08/15] dma-mapping: move dma_get_required_mask to kernel/dma Christoph Hellwig
2018-12-07 19:07 ` [PATCH 09/15] dma-mapping: move various slow path functions out of line Christoph Hellwig
2018-12-07 19:07 ` [PATCH 10/15] dma-mapping: move dma_cache_sync " Christoph Hellwig
2018-12-07 19:07 ` [PATCH 11/15] dma-mapping: always build the direct mapping code Christoph Hellwig
2018-12-07 19:07 ` [PATCH 12/15] dma-mapping: factor out dummy DMA ops Christoph Hellwig
2018-12-07 19:07 ` [PATCH 13/15] ACPI / scan: Refactor _CCA enforcement Christoph Hellwig
2018-12-14 21:15   ` Bjorn Helgaas
2018-12-07 19:07 ` [PATCH 14/15] vmd: use the proper dma_* APIs instead of direct methods calls Christoph Hellwig
2018-12-14 21:17   ` Bjorn Helgaas
2018-12-14 21:34     ` Derrick, Jonathan
2018-12-07 19:07 ` [PATCH 15/15] dma-mapping: bypass indirect calls for dma-direct Christoph Hellwig
2018-12-14 14:11   ` Marek Szyprowski
2018-12-14 14:24     ` Christoph Hellwig
2018-12-14 14:32       ` Marek Szyprowski
2018-12-15 17:46   ` [15/15] " Guenter Roeck
2018-12-16  9:02     ` Christoph Hellwig
2018-12-18 20:34   ` Guillaume Tucker
2018-12-18 20:42     ` Robin Murphy
2018-12-19  6:42       ` Christoph Hellwig
2018-12-20 16:44   ` [PATCH 15/15] " Thierry Reding
2018-12-20 16:46     ` Christoph Hellwig
2018-12-08 16:06 ` [RFC] avoid indirect calls for DMA direct mappings v2 Jesper Dangaard Brouer
2018-12-08 16:50   ` Christoph Hellwig
2018-12-10 21:51 ` Luck, Tony
2018-12-11  6:51   ` Christoph Hellwig
2018-12-11 16:42     ` Luck, Tony
2018-12-11 17:13     ` Luck, Tony
2018-12-11 17:15       ` Christoph Hellwig
2018-12-13 20:08 ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181207190720.18517-3-hch@lst.de \
    --to=hch@lst.de \
    --cc=brouer@redhat.com \
    --cc=fenghua.yu@intel.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jonathan.derrick@intel.com \
    --cc=keith.busch@intel.com \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-ia64@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=robin.murphy@arm.com \
    --cc=tariqt@mellanox.com \
    --cc=toke@toke.dk \
    --cc=tony.luck@intel.com \
    --cc=torvalds@linux-foundation.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git