From: Faiz Abbas <faiz_abbas@ti.com>
To: <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-mmc@vger.kernel.org>
Cc: <ulf.hansson@linaro.org>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <adrian.hunter@intel.com>,
<michal.simek@xilinx.com>, <kishon@ti.com>, <faiz_abbas@ti.com>
Subject: [PATCH v3 1/3] dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's AM654 SOCs
Date: Tue, 11 Dec 2018 00:05:05 +0530 [thread overview]
Message-ID: <20181210183507.9617-2-faiz_abbas@ti.com> (raw)
In-Reply-To: <20181210183507.9617-1-faiz_abbas@ti.com>
Add binding documentation for mmc host controllers present on TI's AM654
SOCs.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
.../devicetree/bindings/mmc/sdhci-am654.txt | 36 +++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-am654.txt
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
new file mode 100644
index 000000000000..15dbbbace27e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
@@ -0,0 +1,36 @@
+Device Tree Bindings for the SDHCI Controllers present on TI's AM654 SOCs
+
+The bindings follow the mmc[1], clock[2] and interrupt[3] bindings.
+Only deviations are documented here.
+
+ [1] Documentation/devicetree/bindings/mmc/mmc.txt
+ [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+ [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Required Properties:
+ - compatible: should be "ti,am654-sdhci-5.1"
+ - reg: Must be two entries.
+ - The first should be the sdhci register space
+ - The second should the subsystem/phy register space
+ - clocks: Handles to the clock inputs.
+ - clock-names: Tuple including "clk_xin" and "clk_ahb"
+ - interrupts: Interrupt specifiers
+ - ti,otap-del-sel: Output Tap Delay select
+ - ti,trm-icp: DLL trim select
+ - ti,driver-strength-ohm: driver strength in ohms.
+ Valid values are 33, 40, 50, 66 and 100 ohms.
+
+Example:
+
+ sdhci0: sdhci@4f80000 {
+ compatible = "ti,am654-sdhci-5.1";
+ reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
+ power-domains = <&k3_pds 47>;
+ clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
+ clock-names = "clk_ahb", "clk_xin";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ sdhci-caps-mask = <0x80000007 0x0>;
+ mmc-ddr-1_8v;
+ ti,otap-del-sel = <0x2>;
+ ti,trm-icp = <0x8>;
+ };
--
2.19.2
next prev parent reply other threads:[~2018-12-10 18:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-10 18:35 [PATCH v3 0/3] Add driver Support for MMCSD on AM654x Faiz Abbas
2018-12-10 18:35 ` Faiz Abbas [this message]
2018-12-10 18:35 ` [PATCH v3 2/3] dt-bindings: mmc: sdhci-of-arasan: Add deprecated message for AM65 Faiz Abbas
2018-12-10 18:35 ` [PATCH v3 3/3] mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver Faiz Abbas
2018-12-17 8:15 ` [PATCH v3 0/3] Add driver Support for MMCSD on AM654x Faiz Abbas
2018-12-17 8:24 ` Sekhar Nori
2018-12-17 8:26 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181210183507.9617-2-faiz_abbas@ti.com \
--to=faiz_abbas@ti.com \
--cc=adrian.hunter@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michal.simek@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).