LKML Archive on
 help / Atom feed
From: Sibi Sankar <>
	Sibi Sankar <>
Subject: [PATCH 1/2] dt-bindings: remoteproc: qcom: Add firmware bindings for Q6V5 MSS
Date: Wed, 12 Dec 2018 18:14:55 +0530
Message-ID: <> (raw)
In-Reply-To: <>

Add optional firmware bindings for Q6V5 MSS. It lists the two relative
firmware paths which are used for booting and authenticating the Hexagon

Signed-off-by: Sibi Sankar <>
 Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 9ff5b0309417..1f6988a60636 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -36,6 +36,13 @@ on the Qualcomm Hexagon core.
 	Value type: <stringlist>
 	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
+- qcom,firmware:
+	Usage: optional
+	Value type: <stringlist>
+	Definition: must list the 2 relative firmware paths (mba and modem
+		    metadata respectively) which are used for booting and
+		    authenticating the Hexagon core.
 - clocks:
 	Usage: required
 	Value type: <phandle>
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-12 12:44 [PATCH 0/2] " Sibi Sankar
2018-12-12 12:44 ` Sibi Sankar [this message]
2018-12-20 20:10   ` [PATCH 1/2] dt-bindings: remoteproc: qcom: " Rob Herring
2018-12-28  4:47     ` Sibi Sankar
2018-12-12 12:44 ` [PATCH 2/2] remoteproc: qcom: q6v5-mss: Add support for parsing fw dt bindings Sibi Sankar

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox