LKML Archive on lore.kernel.org
 help / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org, david.brown@linaro.org,
	robh+dt@kernel.org, mark.rutland@arm.com, andy.gross@linaro.org
Cc: briannorris@chromium.org, akdwived@codeaurora.org,
	clew@codeaurora.org, linux-kernel@vger.kernel.org,
	linux-arm-msm-owner@vger.kernel.org, ohad@wizery.com,
	linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
	Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH 2/2] remoteproc: qcom: q6v5-mss: Add support for parsing fw dt bindings
Date: Wed, 12 Dec 2018 18:14:56 +0530
Message-ID: <20181212124456.3164-3-sibis@codeaurora.org> (raw)
In-Reply-To: <20181212124456.3164-1-sibis@codeaurora.org>

Add support for parsing "qcom,firmware" dt bindings which specifies
the relative paths of mba and modem metadata as a list of strings.
Fallback to the default paths for mba/modem on -EINVAL.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_mss.c | 49 +++++++++++++++++++++++++-----
 1 file changed, 41 insertions(+), 8 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 01be7314e176..c4e7700aee0f 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
@@ -30,6 +31,7 @@
 #include <linux/remoteproc.h>
 #include <linux/reset.h>
 #include <linux/soc/qcom/mdt_loader.h>
+#include <linux/string.h>
 #include <linux/iopoll.h>
 
 #include "remoteproc_internal.h"
@@ -188,6 +190,7 @@ struct q6v5 {
 	bool has_alt_reset;
 	int mpss_perm;
 	int mba_perm;
+	const char *hexagon_mdt_image;
 	int version;
 };
 
@@ -860,17 +863,29 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 	phys_addr_t min_addr = PHYS_ADDR_MAX;
 	phys_addr_t max_addr = 0;
 	bool relocate = false;
-	char seg_name[10];
+	char seg_name[35];
+	char *fw_prefix;
+	char *tmp;
 	ssize_t offset;
 	size_t size = 0;
 	void *ptr;
 	int ret;
 	int i;
 
-	ret = request_firmware(&fw, "modem.mdt", qproc->dev);
+	fw_prefix = kstrdup(qproc->hexagon_mdt_image, GFP_KERNEL);
+	if (!fw_prefix)
+		return -ENOMEM;
+
+	/* strip out the fw extn */
+	tmp = strrchr(fw_prefix, '.');
+	if (tmp)
+		*tmp = '\0';
+
+	ret = request_firmware(&fw, qproc->hexagon_mdt_image, qproc->dev);
 	if (ret < 0) {
-		dev_err(qproc->dev, "unable to load modem.mdt\n");
-		return ret;
+		dev_err(qproc->dev, "unable to load %s\n",
+			qproc->hexagon_mdt_image);
+		goto release_fw_prefix;
 	}
 
 	/* Initialize the RMB validator */
@@ -918,7 +933,8 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 		ptr = qproc->mpss_region + offset;
 
 		if (phdr->p_filesz) {
-			snprintf(seg_name, sizeof(seg_name), "modem.b%02d", i);
+			snprintf(seg_name, sizeof(seg_name), "%s.b%02d",
+				 fw_prefix, i);
 			ret = request_firmware(&seg_fw, seg_name, qproc->dev);
 			if (ret) {
 				dev_err(qproc->dev, "failed to load %s\n", seg_name);
@@ -960,6 +976,8 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 
 release_firmware:
 	release_firmware(fw);
+release_fw_prefix:
+	kfree(fw_prefix);
 
 	return ret < 0 ? ret : 0;
 }
@@ -1075,9 +1093,10 @@ static int qcom_q6v5_register_dump_segments(struct rproc *rproc,
 	unsigned long i;
 	int ret;
 
-	ret = request_firmware(&fw, "modem.mdt", qproc->dev);
+	ret = request_firmware(&fw, qproc->hexagon_mdt_image, qproc->dev);
 	if (ret < 0) {
-		dev_err(qproc->dev, "unable to load modem.mdt\n");
+		dev_err(qproc->dev, "unable to load %s\n",
+			qproc->hexagon_mdt_image);
 		return ret;
 	}
 
@@ -1253,6 +1272,8 @@ static int q6v5_probe(struct platform_device *pdev)
 	const struct rproc_hexagon_res *desc;
 	struct q6v5 *qproc;
 	struct rproc *rproc;
+	const char *mba_image;
+	const char *fw_name[2];
 	int ret;
 
 	desc = of_device_get_match_data(&pdev->dev);
@@ -1262,8 +1283,19 @@ static int q6v5_probe(struct platform_device *pdev)
 	if (desc->need_mem_protection && !qcom_scm_is_available())
 		return -EPROBE_DEFER;
 
+	ret = of_property_count_strings(pdev->dev.of_node, "qcom,firmware");
+	if (ret != -EINVAL && ret != 2)
+		return -EINVAL;
+
+	ret = of_property_read_string_array(pdev->dev.of_node, "qcom,firmware",
+					    fw_name, 2);
+	if (ret != -EINVAL && ret != 2)
+		return -EINVAL;
+
+	mba_image = (ret != 2) ? desc->hexagon_mba_image : fw_name[0];
+
 	rproc = rproc_alloc(&pdev->dev, pdev->name, &q6v5_ops,
-			    desc->hexagon_mba_image, sizeof(*qproc));
+			    mba_image, sizeof(*qproc));
 	if (!rproc) {
 		dev_err(&pdev->dev, "failed to allocate rproc\n");
 		return -ENOMEM;
@@ -1272,6 +1304,7 @@ static int q6v5_probe(struct platform_device *pdev)
 	qproc = (struct q6v5 *)rproc->priv;
 	qproc->dev = &pdev->dev;
 	qproc->rproc = rproc;
+	qproc->hexagon_mdt_image = (ret != 2) ? "modem.mdt" : fw_name[1];
 	platform_set_drvdata(pdev, qproc);
 
 	ret = q6v5_init_mem(qproc, pdev);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


      parent reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-12 12:44 [PATCH 0/2] Add firmware bindings for Q6V5 MSS Sibi Sankar
2018-12-12 12:44 ` [PATCH 1/2] dt-bindings: remoteproc: qcom: " Sibi Sankar
2018-12-20 20:10   ` Rob Herring
2018-12-28  4:47     ` Sibi Sankar
2018-12-12 12:44 ` Sibi Sankar [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181212124456.3164-3-sibis@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=akdwived@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=briannorris@chromium.org \
    --cc=clew@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm-owner@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=ohad@wizery.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox