linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* use generic DMA mapping code in powerpc V4
@ 2018-11-14  8:22 Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 01/34] powerpc: use mm zones more sensibly Christoph Hellwig
                   ` (36 more replies)
  0 siblings, 37 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Hi all,

this series switches the powerpc port to use the generic swiotlb and
noncoherent dma ops, and to use more generic code for the coherent
direct mapping, as well as removing a lot of dead code.

As this series is very large and depends on the dma-mapping tree I've
also published a git tree:

    git://git.infradead.org/users/hch/misc.git powerpc-dma.4

Gitweb:

    http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.4

Changes since v3:
 - rebase on the powerpc fixes tree
 - add a new patch to actually make the baseline amigaone config
   configure without warnings
 - only use ZONE_DMA for 64-bit embedded CPUs, on pseries an IOMMU is
   always present
 - fix compile in mem.c for one configuration
 - drop the full npu removal for now, will be resent separately
 - a few git bisection fixes

The changes since v1 are to big to list and v2 was not posted in public.


^ permalink raw reply	[flat|nested] 178+ messages in thread

* [PATCH 01/34] powerpc: use mm zones more sensibly
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-12-06 14:09   ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 02/34] powerpc: allow NOT_COHERENT_CACHE for amigaone Christoph Hellwig
                   ` (35 subsequent siblings)
  36 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Powerpc has somewhat odd usage where ZONE_DMA is used for all memory on
common 64-bit configfs, and ZONE_DMA32 is used for 31-bit schemes.

Move to a scheme closer to what other architectures use (and I dare to
say the intent of the system):

 - ZONE_DMA: optionally for memory < 31-bit (64-bit embedded only)
 - ZONE_NORMAL: everything addressable by the kernel
 - ZONE_HIGHMEM: memory > 32-bit for 32-bit kernels

Also provide information on how ZONE_DMA is used by defining
ARCH_ZONE_DMA_BITS.

Contains various fixes from Benjamin Herrenschmidt.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/Kconfig                          |  8 +---
 arch/powerpc/include/asm/page.h               |  2 +
 arch/powerpc/include/asm/pgtable.h            |  1 -
 arch/powerpc/kernel/dma-swiotlb.c             |  6 +--
 arch/powerpc/kernel/dma.c                     |  7 +--
 arch/powerpc/mm/mem.c                         | 47 +++++++------------
 arch/powerpc/platforms/85xx/corenet_generic.c | 10 ----
 arch/powerpc/platforms/85xx/qemu_e500.c       |  9 ----
 include/linux/mmzone.h                        |  2 +-
 9 files changed, 25 insertions(+), 67 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 8be31261aec8..cffff3613bc1 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -374,9 +374,9 @@ config PPC_ADV_DEBUG_DAC_RANGE
 	depends on PPC_ADV_DEBUG_REGS && 44x
 	default y
 
-config ZONE_DMA32
+config ZONE_DMA
 	bool
-	default y if PPC64
+	default y if PPC_BOOK3E_64
 
 config PGTABLE_LEVELS
 	int
@@ -869,10 +869,6 @@ config ISA
 	  have an IBM RS/6000 or pSeries machine, say Y.  If you have an
 	  embedded board, consult your board documentation.
 
-config ZONE_DMA
-	bool
-	default y
-
 config GENERIC_ISA_DMA
 	bool
 	depends on ISA_DMA_API
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index f6a1265face2..fc8c9ac0c6be 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -354,4 +354,6 @@ typedef struct page *pgtable_t;
 #endif /* __ASSEMBLY__ */
 #include <asm/slice.h>
 
+#define ARCH_ZONE_DMA_BITS 31
+
 #endif /* _ASM_POWERPC_PAGE_H */
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 9679b7519a35..8af32ce93c7f 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -66,7 +66,6 @@ extern unsigned long empty_zero_page[];
 
 extern pgd_t swapper_pg_dir[];
 
-void limit_zone_pfn(enum zone_type zone, unsigned long max_pfn);
 int dma_pfn_limit_to_zone(u64 pfn_limit);
 extern void paging_init(void);
 
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 5fc335f4d9cd..678811abccfc 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -108,12 +108,8 @@ int __init swiotlb_setup_bus_notifier(void)
 
 void __init swiotlb_detect_4g(void)
 {
-	if ((memblock_end_of_DRAM() - 1) > 0xffffffff) {
+	if ((memblock_end_of_DRAM() - 1) > 0xffffffff)
 		ppc_swiotlb_enable = 1;
-#ifdef CONFIG_ZONE_DMA32
-		limit_zone_pfn(ZONE_DMA32, (1ULL << 32) >> PAGE_SHIFT);
-#endif
-	}
 }
 
 static int __init check_swiotlb_enabled(void)
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index dbfc7056d7df..6551685a4ed0 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -50,7 +50,7 @@ static int dma_nommu_dma_supported(struct device *dev, u64 mask)
 		return 1;
 
 #ifdef CONFIG_FSL_SOC
-	/* Freescale gets another chance via ZONE_DMA/ZONE_DMA32, however
+	/* Freescale gets another chance via ZONE_DMA, however
 	 * that will have to be refined if/when they support iommus
 	 */
 	return 1;
@@ -94,13 +94,10 @@ void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
 	}
 
 	switch (zone) {
+#ifdef CONFIG_ZONE_DMA
 	case ZONE_DMA:
 		flag |= GFP_DMA;
 		break;
-#ifdef CONFIG_ZONE_DMA32
-	case ZONE_DMA32:
-		flag |= GFP_DMA32;
-		break;
 #endif
 	};
 #endif /* CONFIG_FSL_SOC */
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 0a64fffabee1..c0b676c3a5ba 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -246,35 +246,19 @@ static int __init mark_nonram_nosave(void)
 }
 #endif
 
-static bool zone_limits_final;
-
 /*
- * The memory zones past TOP_ZONE are managed by generic mm code.
- * These should be set to zero since that's what every other
- * architecture does.
+ * Zones usage:
+ *
+ * We setup ZONE_DMA to be 31-bits on all platforms and ZONE_NORMAL to be
+ * everything else. GFP_DMA32 page allocations automatically fall back to
+ * ZONE_DMA.
+ *
+ * By using 31-bit unconditionally, we can exploit ARCH_ZONE_DMA_BITS to
+ * inform the generic DMA mapping code.  32-bit only devices (if not handled
+ * by an IOMMU anyway) will take a first dip into ZONE_NORMAL and get
+ * otherwise served by ZONE_DMA.
  */
-static unsigned long max_zone_pfns[MAX_NR_ZONES] = {
-	[0            ... TOP_ZONE        ] = ~0UL,
-	[TOP_ZONE + 1 ... MAX_NR_ZONES - 1] = 0
-};
-
-/*
- * Restrict the specified zone and all more restrictive zones
- * to be below the specified pfn.  May not be called after
- * paging_init().
- */
-void __init limit_zone_pfn(enum zone_type zone, unsigned long pfn_limit)
-{
-	int i;
-
-	if (WARN_ON(zone_limits_final))
-		return;
-
-	for (i = zone; i >= 0; i--) {
-		if (max_zone_pfns[i] > pfn_limit)
-			max_zone_pfns[i] = pfn_limit;
-	}
-}
+static unsigned long max_zone_pfns[MAX_NR_ZONES];
 
 /*
  * Find the least restrictive zone that is entirely below the
@@ -324,11 +308,14 @@ void __init paging_init(void)
 	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
 	       (long int)((top_of_ram - total_ram) >> 20));
 
+#ifdef CONFIG_ZONE_DMA
+	max_zone_pfns[ZONE_DMA]	= min(max_low_pfn, 0x7fffffffUL >> PAGE_SHIFT);
+#endif
+	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
 #ifdef CONFIG_HIGHMEM
-	limit_zone_pfn(ZONE_NORMAL, lowmem_end_addr >> PAGE_SHIFT);
+	max_zone_pfns[ZONE_HIGHMEM] = max_pfn;
 #endif
-	limit_zone_pfn(TOP_ZONE, top_of_ram >> PAGE_SHIFT);
-	zone_limits_final = true;
+
 	free_area_init_nodes(max_zone_pfns);
 
 	mark_nonram_nosave();
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index ac191a7a1337..b0dac307bebf 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -68,16 +68,6 @@ void __init corenet_gen_setup_arch(void)
 
 	swiotlb_detect_4g();
 
-#if defined(CONFIG_FSL_PCI) && defined(CONFIG_ZONE_DMA32)
-	/*
-	 * Inbound windows don't cover the full lower 4 GiB
-	 * due to conflicts with PCICSRBAR and outbound windows,
-	 * so limit the DMA32 zone to 2 GiB, to allow consistent
-	 * allocations to succeed.
-	 */
-	limit_zone_pfn(ZONE_DMA32, 1UL << (31 - PAGE_SHIFT));
-#endif
-
 	pr_info("%s board\n", ppc_md.name);
 
 	mpc85xx_qe_init();
diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c
index b63a8548366f..27631c607f3d 100644
--- a/arch/powerpc/platforms/85xx/qemu_e500.c
+++ b/arch/powerpc/platforms/85xx/qemu_e500.c
@@ -45,15 +45,6 @@ static void __init qemu_e500_setup_arch(void)
 
 	fsl_pci_assign_primary();
 	swiotlb_detect_4g();
-#if defined(CONFIG_FSL_PCI) && defined(CONFIG_ZONE_DMA32)
-	/*
-	 * Inbound windows don't cover the full lower 4 GiB
-	 * due to conflicts with PCICSRBAR and outbound windows,
-	 * so limit the DMA32 zone to 2 GiB, to allow consistent
-	 * allocations to succeed.
-	 */
-	limit_zone_pfn(ZONE_DMA32, 1UL << (31 - PAGE_SHIFT));
-#endif
 	mpc85xx_smp_init();
 }
 
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 847705a6d0ec..e2d01ccd071d 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -314,7 +314,7 @@ enum zone_type {
 	 * Architecture		Limit
 	 * ---------------------------
 	 * parisc, ia64, sparc	<4G
-	 * s390			<2G
+	 * s390, powerpc	<2G
 	 * arm			Various
 	 * alpha		Unlimited or 0-16MB.
 	 *
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 02/34] powerpc: allow NOT_COHERENT_CACHE for amigaone
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 01/34] powerpc: use mm zones more sensibly Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-12-06 14:09   ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 03/34] powerpc/dma: remove the unused ARCH_HAS_DMA_MMAP_COHERENT define Christoph Hellwig
                   ` (34 subsequent siblings)
  36 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

AMIGAONE select NOT_COHERENT_CACHE, so we better allow it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/platforms/Kconfig.cputype | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index f4e2c5729374..6fedbf349fce 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -412,7 +412,8 @@ config NR_CPUS
 
 config NOT_COHERENT_CACHE
 	bool
-	depends on 4xx || PPC_8xx || E200 || PPC_MPC512x || GAMECUBE_COMMON
+	depends on 4xx || PPC_8xx || E200 || PPC_MPC512x || \
+		GAMECUBE_COMMON || AMIGAONE
 	default n if PPC_47x
 	default y
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 03/34] powerpc/dma: remove the unused ARCH_HAS_DMA_MMAP_COHERENT define
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 01/34] powerpc: use mm zones more sensibly Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 02/34] powerpc: allow NOT_COHERENT_CACHE for amigaone Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-12-06 14:09   ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 04/34] powerpc/dma: remove the unused ISA_DMA_THRESHOLD export Christoph Hellwig
                   ` (33 subsequent siblings)
  36 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/dma-mapping.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 8fa394520af6..f2a4a7142b1e 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -112,7 +112,5 @@ extern int dma_set_mask(struct device *dev, u64 dma_mask);
 
 extern u64 __dma_get_required_mask(struct device *dev);
 
-#define ARCH_HAS_DMA_MMAP_COHERENT
-
 #endif /* __KERNEL__ */
 #endif	/* _ASM_DMA_MAPPING_H */
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 04/34] powerpc/dma: remove the unused ISA_DMA_THRESHOLD export
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (2 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 03/34] powerpc/dma: remove the unused ARCH_HAS_DMA_MMAP_COHERENT define Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-12-06 14:10   ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 05/34] powerpc/dma: remove the unused dma_iommu_ops export Christoph Hellwig
                   ` (32 subsequent siblings)
  36 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/setup_32.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 81909600013a..07f7e6aaf104 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -59,7 +59,6 @@ unsigned long ISA_DMA_THRESHOLD;
 unsigned int DMA_MODE_READ;
 unsigned int DMA_MODE_WRITE;
 
-EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
 EXPORT_SYMBOL(DMA_MODE_READ);
 EXPORT_SYMBOL(DMA_MODE_WRITE);
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 05/34] powerpc/dma: remove the unused dma_iommu_ops export
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (3 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 04/34] powerpc/dma: remove the unused ISA_DMA_THRESHOLD export Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-12-06 14:10   ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 06/34] powerpc/dma: split the two __dma_alloc_coherent implementations Christoph Hellwig
                   ` (31 subsequent siblings)
  36 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/kernel/dma-iommu.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index f9fe2080ceb9..2ca6cfaebf65 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -6,7 +6,6 @@
  * busses using the iommu infrastructure
  */
 
-#include <linux/export.h>
 #include <asm/iommu.h>
 
 /*
@@ -123,4 +122,3 @@ struct dma_map_ops dma_iommu_ops = {
 	.get_required_mask	= dma_iommu_get_required_mask,
 	.mapping_error		= dma_iommu_mapping_error,
 };
-EXPORT_SYMBOL(dma_iommu_ops);
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 06/34] powerpc/dma: split the two __dma_alloc_coherent implementations
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (4 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 05/34] powerpc/dma: remove the unused dma_iommu_ops export Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-12-06 14:10   ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 07/34] powerpc/dma: remove the no-op dma_nommu_unmap_{page,sg} routines Christoph Hellwig
                   ` (30 subsequent siblings)
  36 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

The implemementation for the CONFIG_NOT_COHERENT_CACHE case doesn't share
any code with the one for systems with coherent caches.  Split it off
and merge it with the helpers in dma-noncoherent.c that have no other
callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/dma-mapping.h |  5 -----
 arch/powerpc/kernel/dma.c              | 14 ++------------
 arch/powerpc/mm/dma-noncoherent.c      | 15 +++++++--------
 arch/powerpc/platforms/44x/warp.c      |  2 +-
 4 files changed, 10 insertions(+), 26 deletions(-)

diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index f2a4a7142b1e..dacd0f93f2b2 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -39,9 +39,6 @@ extern int dma_nommu_mmap_coherent(struct device *dev,
  * to ensure it is consistent.
  */
 struct device;
-extern void *__dma_alloc_coherent(struct device *dev, size_t size,
-				  dma_addr_t *handle, gfp_t gfp);
-extern void __dma_free_coherent(size_t size, void *vaddr);
 extern void __dma_sync(void *vaddr, size_t size, int direction);
 extern void __dma_sync_page(struct page *page, unsigned long offset,
 				 size_t size, int direction);
@@ -52,8 +49,6 @@ extern unsigned long __dma_get_coherent_pfn(unsigned long cpu_addr);
  * Cache coherent cores.
  */
 
-#define __dma_alloc_coherent(dev, gfp, size, handle)	NULL
-#define __dma_free_coherent(size, addr)		((void)0)
 #define __dma_sync(addr, size, rw)		((void)0)
 #define __dma_sync_page(pg, off, sz, rw)	((void)0)
 
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 6551685a4ed0..d6deb458bb91 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -62,18 +62,12 @@ static int dma_nommu_dma_supported(struct device *dev, u64 mask)
 #endif
 }
 
+#ifndef CONFIG_NOT_COHERENT_CACHE
 void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
 				  dma_addr_t *dma_handle, gfp_t flag,
 				  unsigned long attrs)
 {
 	void *ret;
-#ifdef CONFIG_NOT_COHERENT_CACHE
-	ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
-	if (ret == NULL)
-		return NULL;
-	*dma_handle += get_dma_offset(dev);
-	return ret;
-#else
 	struct page *page;
 	int node = dev_to_node(dev);
 #ifdef CONFIG_FSL_SOC
@@ -110,19 +104,15 @@ void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
 	*dma_handle = __pa(ret) + get_dma_offset(dev);
 
 	return ret;
-#endif
 }
 
 void __dma_nommu_free_coherent(struct device *dev, size_t size,
 				void *vaddr, dma_addr_t dma_handle,
 				unsigned long attrs)
 {
-#ifdef CONFIG_NOT_COHERENT_CACHE
-	__dma_free_coherent(size, vaddr);
-#else
 	free_pages((unsigned long)vaddr, get_order(size));
-#endif
 }
+#endif /* !CONFIG_NOT_COHERENT_CACHE */
 
 static void *dma_nommu_alloc_coherent(struct device *dev, size_t size,
 				       dma_addr_t *dma_handle, gfp_t flag,
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
index b6e7b5952ab5..e955539686a4 100644
--- a/arch/powerpc/mm/dma-noncoherent.c
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -29,7 +29,7 @@
 #include <linux/string.h>
 #include <linux/types.h>
 #include <linux/highmem.h>
-#include <linux/dma-mapping.h>
+#include <linux/dma-direct.h>
 #include <linux/export.h>
 
 #include <asm/tlbflush.h>
@@ -151,8 +151,8 @@ static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsi
  * Allocate DMA-coherent memory space and return both the kernel remapped
  * virtual and bus address for that space.
  */
-void *
-__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
 {
 	struct page *page;
 	struct ppc_vm_region *c;
@@ -223,7 +223,7 @@ __dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t
 		/*
 		 * Set the "dma handle"
 		 */
-		*handle = page_to_phys(page);
+		*dma_handle = phys_to_dma(dev, page_to_phys(page));
 
 		do {
 			SetPageReserved(page);
@@ -249,12 +249,12 @@ __dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t
  no_page:
 	return NULL;
 }
-EXPORT_SYMBOL(__dma_alloc_coherent);
 
 /*
  * free a page as defined by the above mapping.
  */
-void __dma_free_coherent(size_t size, void *vaddr)
+void __dma_nommu_free_coherent(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, unsigned long attrs)
 {
 	struct ppc_vm_region *c;
 	unsigned long flags, addr;
@@ -309,7 +309,6 @@ void __dma_free_coherent(size_t size, void *vaddr)
 	       __func__, vaddr);
 	dump_stack();
 }
-EXPORT_SYMBOL(__dma_free_coherent);
 
 /*
  * make an area consistent.
@@ -401,7 +400,7 @@ EXPORT_SYMBOL(__dma_sync_page);
 
 /*
  * Return the PFN for a given cpu virtual address returned by
- * __dma_alloc_coherent. This is used by dma_mmap_coherent()
+ * __dma_nommu_alloc_coherent. This is used by dma_mmap_coherent()
  */
 unsigned long __dma_get_coherent_pfn(unsigned long cpu_addr)
 {
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index a886c2c22097..7e4f8ca19ce8 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -47,7 +47,7 @@ static int __init warp_probe(void)
 	if (!of_machine_is_compatible("pika,warp"))
 		return 0;
 
-	/* For __dma_alloc_coherent */
+	/* For __dma_nommu_alloc_coherent */
 	ISA_DMA_THRESHOLD = ~0L;
 
 	return 1;
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 07/34] powerpc/dma: remove the no-op dma_nommu_unmap_{page,sg} routines
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (5 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 06/34] powerpc/dma: split the two __dma_alloc_coherent implementations Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-12-06 14:10   ` [PATCH 07/34] powerpc/dma: remove the no-op dma_nommu_unmap_{page, sg} routines Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 08/34] powerpc/dma: untangle vio_dma_mapping_ops from dma_iommu_ops Christoph Hellwig
                   ` (29 subsequent siblings)
  36 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

These methods are optional, no need to implement no-op versions.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/dma.c | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index d6deb458bb91..7078d72baec2 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -197,12 +197,6 @@ static int dma_nommu_map_sg(struct device *dev, struct scatterlist *sgl,
 	return nents;
 }
 
-static void dma_nommu_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction,
-				unsigned long attrs)
-{
-}
-
 static u64 dma_nommu_get_required_mask(struct device *dev)
 {
 	u64 end, mask;
@@ -228,14 +222,6 @@ static inline dma_addr_t dma_nommu_map_page(struct device *dev,
 	return page_to_phys(page) + offset + get_dma_offset(dev);
 }
 
-static inline void dma_nommu_unmap_page(struct device *dev,
-					 dma_addr_t dma_address,
-					 size_t size,
-					 enum dma_data_direction direction,
-					 unsigned long attrs)
-{
-}
-
 #ifdef CONFIG_NOT_COHERENT_CACHE
 static inline void dma_nommu_sync_sg(struct device *dev,
 		struct scatterlist *sgl, int nents,
@@ -261,10 +247,8 @@ const struct dma_map_ops dma_nommu_ops = {
 	.free				= dma_nommu_free_coherent,
 	.mmap				= dma_nommu_mmap_coherent,
 	.map_sg				= dma_nommu_map_sg,
-	.unmap_sg			= dma_nommu_unmap_sg,
 	.dma_supported			= dma_nommu_dma_supported,
 	.map_page			= dma_nommu_map_page,
-	.unmap_page			= dma_nommu_unmap_page,
 	.get_required_mask		= dma_nommu_get_required_mask,
 #ifdef CONFIG_NOT_COHERENT_CACHE
 	.sync_single_for_cpu 		= dma_nommu_sync_single,
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 08/34] powerpc/dma: untangle vio_dma_mapping_ops from dma_iommu_ops
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (6 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 07/34] powerpc/dma: remove the no-op dma_nommu_unmap_{page,sg} routines Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-12-06 14:10   ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 09/34] powerpc/dma: handle iommu bypass in dma_iommu_ops Christoph Hellwig
                   ` (28 subsequent siblings)
  36 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

vio_dma_mapping_ops currently does a lot of indirect calls through
dma_iommu_ops, which not only make the code harder to follow but are
also expensive in the post-spectre world.  Unwind the indirect calls
by calling the ppc_iommu_* or iommu_* APIs directly applicable, or
just use the dma_iommu_* methods directly where we can.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/iommu.h     |  1 +
 arch/powerpc/kernel/dma-iommu.c      |  2 +-
 arch/powerpc/platforms/pseries/vio.c | 87 ++++++++++++----------------
 3 files changed, 38 insertions(+), 52 deletions(-)

diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 35db0cbc9222..75daa10f31a4 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -242,6 +242,7 @@ static inline int __init tce_iommu_bus_notifier_init(void)
 }
 #endif /* !CONFIG_IOMMU_API */
 
+u64 dma_iommu_get_required_mask(struct device *dev);
 int dma_iommu_mapping_error(struct device *dev, dma_addr_t dma_addr);
 
 #else
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 2ca6cfaebf65..0613278abf9f 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -92,7 +92,7 @@ int dma_iommu_dma_supported(struct device *dev, u64 mask)
 		return 1;
 }
 
-static u64 dma_iommu_get_required_mask(struct device *dev)
+u64 dma_iommu_get_required_mask(struct device *dev)
 {
 	struct iommu_table *tbl = get_iommu_table_base(dev);
 	u64 mask;
diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
index 88f1ad1d6309..ea3a9745c812 100644
--- a/arch/powerpc/platforms/pseries/vio.c
+++ b/arch/powerpc/platforms/pseries/vio.c
@@ -492,7 +492,9 @@ static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size,
 		return NULL;
 	}
 
-	ret = dma_iommu_ops.alloc(dev, size, dma_handle, flag, attrs);
+	ret = iommu_alloc_coherent(dev, get_iommu_table_base(dev), size,
+				    dma_handle, dev->coherent_dma_mask, flag,
+				    dev_to_node(dev));
 	if (unlikely(ret == NULL)) {
 		vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE));
 		atomic_inc(&viodev->cmo.allocs_failed);
@@ -507,8 +509,7 @@ static void vio_dma_iommu_free_coherent(struct device *dev, size_t size,
 {
 	struct vio_dev *viodev = to_vio_dev(dev);
 
-	dma_iommu_ops.free(dev, size, vaddr, dma_handle, attrs);
-
+	iommu_free_coherent(get_iommu_table_base(dev), size, vaddr, dma_handle);
 	vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE));
 }
 
@@ -518,22 +519,22 @@ static dma_addr_t vio_dma_iommu_map_page(struct device *dev, struct page *page,
                                          unsigned long attrs)
 {
 	struct vio_dev *viodev = to_vio_dev(dev);
-	struct iommu_table *tbl;
+	struct iommu_table *tbl = get_iommu_table_base(dev);
 	dma_addr_t ret = IOMMU_MAPPING_ERROR;
 
-	tbl = get_iommu_table_base(dev);
-	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE(tbl)))) {
-		atomic_inc(&viodev->cmo.allocs_failed);
-		return ret;
-	}
-
-	ret = dma_iommu_ops.map_page(dev, page, offset, size, direction, attrs);
-	if (unlikely(dma_mapping_error(dev, ret))) {
-		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE(tbl)));
-		atomic_inc(&viodev->cmo.allocs_failed);
-	}
-
+	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE(tbl))))
+		goto out_fail;
+	ret = iommu_map_page(dev, tbl, page, offset, size, device_to_mask(dev),
+			direction, attrs);
+	if (unlikely(ret == IOMMU_MAPPING_ERROR))
+		goto out_deallocate;
 	return ret;
+
+out_deallocate:
+	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE(tbl)));
+out_fail:
+	atomic_inc(&viodev->cmo.allocs_failed);
+	return IOMMU_MAPPING_ERROR;
 }
 
 static void vio_dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle,
@@ -542,11 +543,9 @@ static void vio_dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle,
 				     unsigned long attrs)
 {
 	struct vio_dev *viodev = to_vio_dev(dev);
-	struct iommu_table *tbl;
-
-	tbl = get_iommu_table_base(dev);
-	dma_iommu_ops.unmap_page(dev, dma_handle, size, direction, attrs);
+	struct iommu_table *tbl = get_iommu_table_base(dev);
 
+	iommu_unmap_page(tbl, dma_handle, size, direction, attrs);
 	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE(tbl)));
 }
 
@@ -555,34 +554,32 @@ static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
                                 unsigned long attrs)
 {
 	struct vio_dev *viodev = to_vio_dev(dev);
-	struct iommu_table *tbl;
+	struct iommu_table *tbl = get_iommu_table_base(dev);
 	struct scatterlist *sgl;
 	int ret, count;
 	size_t alloc_size = 0;
 
-	tbl = get_iommu_table_base(dev);
 	for_each_sg(sglist, sgl, nelems, count)
 		alloc_size += roundup(sgl->length, IOMMU_PAGE_SIZE(tbl));
 
-	if (vio_cmo_alloc(viodev, alloc_size)) {
-		atomic_inc(&viodev->cmo.allocs_failed);
-		return 0;
-	}
-
-	ret = dma_iommu_ops.map_sg(dev, sglist, nelems, direction, attrs);
-
-	if (unlikely(!ret)) {
-		vio_cmo_dealloc(viodev, alloc_size);
-		atomic_inc(&viodev->cmo.allocs_failed);
-		return ret;
-	}
+	if (vio_cmo_alloc(viodev, alloc_size))
+		goto out_fail;
+	ret = ppc_iommu_map_sg(dev, tbl, sglist, nelems, device_to_mask(dev),
+			direction, attrs);
+	if (unlikely(!ret))
+		goto out_deallocate;
 
 	for_each_sg(sglist, sgl, ret, count)
 		alloc_size -= roundup(sgl->dma_length, IOMMU_PAGE_SIZE(tbl));
 	if (alloc_size)
 		vio_cmo_dealloc(viodev, alloc_size);
-
 	return ret;
+
+out_deallocate:
+	vio_cmo_dealloc(viodev, alloc_size);
+out_fail:
+	atomic_inc(&viodev->cmo.allocs_failed);
+	return 0;
 }
 
 static void vio_dma_iommu_unmap_sg(struct device *dev,
@@ -591,30 +588,18 @@ static void vio_dma_iommu_unmap_sg(struct device *dev,
 		unsigned long attrs)
 {
 	struct vio_dev *viodev = to_vio_dev(dev);
-	struct iommu_table *tbl;
+	struct iommu_table *tbl = get_iommu_table_base(dev);
 	struct scatterlist *sgl;
 	size_t alloc_size = 0;
 	int count;
 
-	tbl = get_iommu_table_base(dev);
 	for_each_sg(sglist, sgl, nelems, count)
 		alloc_size += roundup(sgl->dma_length, IOMMU_PAGE_SIZE(tbl));
 
-	dma_iommu_ops.unmap_sg(dev, sglist, nelems, direction, attrs);
-
+	ppc_iommu_unmap_sg(tbl, sglist, nelems, direction, attrs);
 	vio_cmo_dealloc(viodev, alloc_size);
 }
 
-static int vio_dma_iommu_dma_supported(struct device *dev, u64 mask)
-{
-        return dma_iommu_ops.dma_supported(dev, mask);
-}
-
-static u64 vio_dma_get_required_mask(struct device *dev)
-{
-        return dma_iommu_ops.get_required_mask(dev);
-}
-
 static const struct dma_map_ops vio_dma_mapping_ops = {
 	.alloc             = vio_dma_iommu_alloc_coherent,
 	.free              = vio_dma_iommu_free_coherent,
@@ -623,8 +608,8 @@ static const struct dma_map_ops vio_dma_mapping_ops = {
 	.unmap_sg          = vio_dma_iommu_unmap_sg,
 	.map_page          = vio_dma_iommu_map_page,
 	.unmap_page        = vio_dma_iommu_unmap_page,
-	.dma_supported     = vio_dma_iommu_dma_supported,
-	.get_required_mask = vio_dma_get_required_mask,
+	.dma_supported     = dma_iommu_mapping_error,
+	.get_required_mask = dma_iommu_get_required_mask,
 	.mapping_error	   = dma_iommu_mapping_error,
 };
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 09/34] powerpc/dma: handle iommu bypass in dma_iommu_ops
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (7 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 08/34] powerpc/dma: untangle vio_dma_mapping_ops from dma_iommu_ops Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 10/34] powerpc/pseries: unwind dma_get_required_mask_pSeriesLP a bit Christoph Hellwig
                   ` (27 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Add a new iommu_bypass flag to struct dev_archdata so that the dma_iommu
implementation can handle the direct mapping transparently instead of
switiching ops around.  Setting of this flag is controlled by new
pci_controller_ops method.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/device.h      |  5 ++
 arch/powerpc/include/asm/dma-mapping.h |  8 +++
 arch/powerpc/include/asm/pci-bridge.h  |  2 +
 arch/powerpc/kernel/dma-iommu.c        | 70 +++++++++++++++++++++++---
 arch/powerpc/kernel/dma.c              | 19 +++----
 5 files changed, 87 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 0245bfcaac32..1aa53318b4bc 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -19,6 +19,11 @@ struct iommu_table;
  * drivers/macintosh/macio_asic.c
  */
 struct dev_archdata {
+	/*
+	 * Set to %true if the dma_iommu_ops are requested to use a direct
+	 * window instead of dynamically mapping memory.
+	 */
+	bool			iommu_bypass : 1;
 	/*
 	 * These two used to be a union. However, with the hybrid ops we need
 	 * both so here we store both a DMA offset for direct mappings and
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index dacd0f93f2b2..824f55995a18 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -29,6 +29,14 @@ extern int dma_nommu_mmap_coherent(struct device *dev,
 				    struct vm_area_struct *vma,
 				    void *cpu_addr, dma_addr_t handle,
 				    size_t size, unsigned long attrs);
+int dma_nommu_map_sg(struct device *dev, struct scatterlist *sgl,
+		int nents, enum dma_data_direction direction,
+		unsigned long attrs);
+dma_addr_t dma_nommu_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size,
+		enum dma_data_direction dir, unsigned long attrs);
+int dma_nommu_dma_supported(struct device *dev, u64 mask);
+u64 dma_nommu_get_required_mask(struct device *dev);
 
 #ifdef CONFIG_NOT_COHERENT_CACHE
 /*
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 94d449031b18..5c7a1e7ffc8a 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -19,6 +19,8 @@ struct device_node;
 struct pci_controller_ops {
 	void		(*dma_dev_setup)(struct pci_dev *pdev);
 	void		(*dma_bus_setup)(struct pci_bus *bus);
+	bool		(*iommu_bypass_supported)(struct pci_dev *pdev,
+				u64 mask);
 
 	int		(*probe_mode)(struct pci_bus *bus);
 
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 0613278abf9f..459be16f8334 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -6,12 +6,30 @@
  * busses using the iommu infrastructure
  */
 
+#include <linux/dma-direct.h>
+#include <linux/pci.h>
 #include <asm/iommu.h>
 
 /*
  * Generic iommu implementation
  */
 
+/*
+ * The coherent mask may be smaller than the real mask, check if we can
+ * really use a direct window.
+ */
+static inline bool dma_iommu_alloc_bypass(struct device *dev)
+{
+	return dev->archdata.iommu_bypass &&
+		dma_nommu_dma_supported(dev, dev->coherent_dma_mask);
+}
+
+static inline bool dma_iommu_map_bypass(struct device *dev,
+		unsigned long attrs)
+{
+	return dev->archdata.iommu_bypass;
+}
+
 /* Allocates a contiguous real buffer and creates mappings over it.
  * Returns the virtual address of the buffer and sets dma_handle
  * to the dma address (mapping) of the first page.
@@ -20,6 +38,9 @@ static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
 				      dma_addr_t *dma_handle, gfp_t flag,
 				      unsigned long attrs)
 {
+	if (dma_iommu_alloc_bypass(dev))
+		return __dma_nommu_alloc_coherent(dev, size, dma_handle, flag,
+				attrs);
 	return iommu_alloc_coherent(dev, get_iommu_table_base(dev), size,
 				    dma_handle, dev->coherent_dma_mask, flag,
 				    dev_to_node(dev));
@@ -29,7 +50,11 @@ static void dma_iommu_free_coherent(struct device *dev, size_t size,
 				    void *vaddr, dma_addr_t dma_handle,
 				    unsigned long attrs)
 {
-	iommu_free_coherent(get_iommu_table_base(dev), size, vaddr, dma_handle);
+	if (dma_iommu_alloc_bypass(dev))
+		__dma_nommu_free_coherent(dev, size, vaddr, dma_handle, attrs);
+	else
+		iommu_free_coherent(get_iommu_table_base(dev), size, vaddr,
+				dma_handle);
 }
 
 /* Creates TCEs for a user provided buffer.  The user buffer must be
@@ -42,6 +67,9 @@ static dma_addr_t dma_iommu_map_page(struct device *dev, struct page *page,
 				     enum dma_data_direction direction,
 				     unsigned long attrs)
 {
+	if (dma_iommu_map_bypass(dev, attrs))
+		return dma_nommu_map_page(dev, page, offset, size, direction,
+				attrs);
 	return iommu_map_page(dev, get_iommu_table_base(dev), page, offset,
 			      size, device_to_mask(dev), direction, attrs);
 }
@@ -51,8 +79,9 @@ static void dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle,
 				 size_t size, enum dma_data_direction direction,
 				 unsigned long attrs)
 {
-	iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size, direction,
-			 attrs);
+	if (!dma_iommu_map_bypass(dev, attrs))
+		iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size,
+				direction,  attrs);
 }
 
 
@@ -60,6 +89,8 @@ static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
 			    int nelems, enum dma_data_direction direction,
 			    unsigned long attrs)
 {
+	if (dma_iommu_map_bypass(dev, attrs))
+		return dma_nommu_map_sg(dev, sglist, nelems, direction, attrs);
 	return ppc_iommu_map_sg(dev, get_iommu_table_base(dev), sglist, nelems,
 				device_to_mask(dev), direction, attrs);
 }
@@ -68,10 +99,20 @@ static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
 		int nelems, enum dma_data_direction direction,
 		unsigned long attrs)
 {
-	ppc_iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems,
+	if (!dma_iommu_map_bypass(dev, attrs))
+		ppc_iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems,
 			   direction, attrs);
 }
 
+static bool dma_iommu_bypass_supported(struct device *dev, u64 mask)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct pci_controller *phb = pci_bus_to_host(pdev->bus);
+
+	return phb->controller_ops.iommu_bypass_supported &&
+		phb->controller_ops.iommu_bypass_supported(pdev, mask);
+}
+
 /* We support DMA to/from any memory page via the iommu */
 int dma_iommu_dma_supported(struct device *dev, u64 mask)
 {
@@ -83,22 +124,39 @@ int dma_iommu_dma_supported(struct device *dev, u64 mask)
 		return 0;
 	}
 
+	if (dev_is_pci(dev) && dma_iommu_bypass_supported(dev, mask)) {
+		dev->archdata.iommu_bypass = true;
+		dev_dbg(dev, "iommu: 64-bit OK, using fixed ops\n");
+		return 1;
+	}
+
 	if (tbl->it_offset > (mask >> tbl->it_page_shift)) {
 		dev_info(dev, "Warning: IOMMU offset too big for device mask\n");
 		dev_info(dev, "mask: 0x%08llx, table offset: 0x%08lx\n",
 				mask, tbl->it_offset << tbl->it_page_shift);
 		return 0;
-	} else
-		return 1;
+	}
+
+	dev_dbg(dev, "iommu: not 64-bit, using default ops\n");
+	dev->archdata.iommu_bypass = false;
+	return 1;
 }
 
 u64 dma_iommu_get_required_mask(struct device *dev)
 {
 	struct iommu_table *tbl = get_iommu_table_base(dev);
 	u64 mask;
+
 	if (!tbl)
 		return 0;
 
+	if (dev_is_pci(dev)) {
+		u64 bypass_mask = dma_nommu_get_required_mask(dev);
+
+		if (dma_iommu_bypass_supported(dev, bypass_mask))
+			return bypass_mask;
+	}
+
 	mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1);
 	mask += mask - 1;
 
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 7078d72baec2..6c368b6820bb 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -40,7 +40,7 @@ static u64 __maybe_unused get_pfn_limit(struct device *dev)
 	return pfn;
 }
 
-static int dma_nommu_dma_supported(struct device *dev, u64 mask)
+int dma_nommu_dma_supported(struct device *dev, u64 mask)
 {
 #ifdef CONFIG_PPC64
 	u64 limit = get_dma_offset(dev) + (memblock_end_of_DRAM() - 1);
@@ -177,9 +177,9 @@ int dma_nommu_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
 			       vma->vm_page_prot);
 }
 
-static int dma_nommu_map_sg(struct device *dev, struct scatterlist *sgl,
-			     int nents, enum dma_data_direction direction,
-			     unsigned long attrs)
+int dma_nommu_map_sg(struct device *dev, struct scatterlist *sgl,
+		int nents, enum dma_data_direction direction,
+		unsigned long attrs)
 {
 	struct scatterlist *sg;
 	int i;
@@ -197,7 +197,7 @@ static int dma_nommu_map_sg(struct device *dev, struct scatterlist *sgl,
 	return nents;
 }
 
-static u64 dma_nommu_get_required_mask(struct device *dev)
+u64 dma_nommu_get_required_mask(struct device *dev)
 {
 	u64 end, mask;
 
@@ -209,12 +209,9 @@ static u64 dma_nommu_get_required_mask(struct device *dev)
 	return mask;
 }
 
-static inline dma_addr_t dma_nommu_map_page(struct device *dev,
-					     struct page *page,
-					     unsigned long offset,
-					     size_t size,
-					     enum dma_data_direction dir,
-					     unsigned long attrs)
+dma_addr_t dma_nommu_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size,
+		enum dma_data_direction dir, unsigned long attrs)
 {
 	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
 		__dma_sync_page(page, offset, size, dir);
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 10/34] powerpc/pseries: unwind dma_get_required_mask_pSeriesLP a bit
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (8 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 09/34] powerpc/dma: handle iommu bypass in dma_iommu_ops Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 11/34] powerpc/pseries: use the generic iommu bypass code Christoph Hellwig
                   ` (26 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Call dma_get_required_mask_pSeriesLP directly instead of dma_iommu_ops
to simply the code a bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/platforms/pseries/iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 06f02960b439..da5716de7f4c 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -1273,7 +1273,7 @@ static u64 dma_get_required_mask_pSeriesLP(struct device *dev)
 			return DMA_BIT_MASK(64);
 	}
 
-	return dma_iommu_ops.get_required_mask(dev);
+	return dma_iommu_get_required_mask(dev);
 }
 
 static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action,
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 11/34] powerpc/pseries: use the generic iommu bypass code
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (9 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 10/34] powerpc/pseries: unwind dma_get_required_mask_pSeriesLP a bit Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 12/34] powerpc/cell: move dma direct window setup out of dma_configure Christoph Hellwig
                   ` (25 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Use the generic iommu bypass code instead of overriding set_dma_mask.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/platforms/pseries/iommu.c | 100 +++++++------------------
 1 file changed, 27 insertions(+), 73 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index da5716de7f4c..8965d174c53b 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -973,7 +973,7 @@ static LIST_HEAD(failed_ddw_pdn_list);
  * pdn: the parent pe node with the ibm,dma_window property
  * Future: also check if we can remap the base window for our base page size
  *
- * returns the dma offset for use by dma_set_mask
+ * returns the dma offset for use by the direct mapped DMA code.
  */
 static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
 {
@@ -1193,87 +1193,40 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 	iommu_add_device(&dev->dev);
 }
 
-static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask)
+static bool iommu_bypass_supported_pSeriesLP(struct pci_dev *pdev, u64 dma_mask)
 {
-	bool ddw_enabled = false;
-	struct device_node *pdn, *dn;
-	struct pci_dev *pdev;
+	struct device_node *dn = pci_device_to_OF_node(pdev), *pdn;
 	const __be32 *dma_window = NULL;
 	u64 dma_offset;
 
-	if (!dev->dma_mask)
-		return -EIO;
-
-	if (!dev_is_pci(dev))
-		goto check_mask;
-
-	pdev = to_pci_dev(dev);
-
 	/* only attempt to use a new window if 64-bit DMA is requested */
-	if (!disable_ddw && dma_mask == DMA_BIT_MASK(64)) {
-		dn = pci_device_to_OF_node(pdev);
-		dev_dbg(dev, "node is %pOF\n", dn);
+	if (dma_mask < DMA_BIT_MASK(64))
+		return false;
 
-		/*
-		 * the device tree might contain the dma-window properties
-		 * per-device and not necessarily for the bus. So we need to
-		 * search upwards in the tree until we either hit a dma-window
-		 * property, OR find a parent with a table already allocated.
-		 */
-		for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->table_group;
-				pdn = pdn->parent) {
-			dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
-			if (dma_window)
-				break;
-		}
-		if (pdn && PCI_DN(pdn)) {
-			dma_offset = enable_ddw(pdev, pdn);
-			if (dma_offset != 0) {
-				dev_info(dev, "Using 64-bit direct DMA at offset %llx\n", dma_offset);
-				set_dma_offset(dev, dma_offset);
-				set_dma_ops(dev, &dma_nommu_ops);
-				ddw_enabled = true;
-			}
-		}
-	}
+	dev_dbg(&pdev->dev, "node is %pOF\n", dn);
 
-	/* fall back on iommu ops */
-	if (!ddw_enabled && get_dma_ops(dev) != &dma_iommu_ops) {
-		dev_info(dev, "Restoring 32-bit DMA via iommu\n");
-		set_dma_ops(dev, &dma_iommu_ops);
+	/*
+	 * the device tree might contain the dma-window properties
+	 * per-device and not necessarily for the bus. So we need to
+	 * search upwards in the tree until we either hit a dma-window
+	 * property, OR find a parent with a table already allocated.
+	 */
+	for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->table_group;
+			pdn = pdn->parent) {
+		dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
+		if (dma_window)
+			break;
 	}
 
-check_mask:
-	if (!dma_supported(dev, dma_mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-	return 0;
-}
-
-static u64 dma_get_required_mask_pSeriesLP(struct device *dev)
-{
-	if (!dev->dma_mask)
-		return 0;
-
-	if (!disable_ddw && dev_is_pci(dev)) {
-		struct pci_dev *pdev = to_pci_dev(dev);
-		struct device_node *dn;
-
-		dn = pci_device_to_OF_node(pdev);
-
-		/* search upwards for ibm,dma-window */
-		for (; dn && PCI_DN(dn) && !PCI_DN(dn)->table_group;
-				dn = dn->parent)
-			if (of_get_property(dn, "ibm,dma-window", NULL))
-				break;
-		/* if there is a ibm,ddw-applicable property require 64 bits */
-		if (dn && PCI_DN(dn) &&
-				of_get_property(dn, "ibm,ddw-applicable", NULL))
-			return DMA_BIT_MASK(64);
+	if (pdn && PCI_DN(pdn)) {
+		dma_offset = enable_ddw(pdev, pdn);
+		if (dma_offset != 0) {
+			set_dma_offset(&pdev->dev, dma_offset);
+			return true;
+		}
 	}
 
-	return dma_iommu_get_required_mask(dev);
+	return false;
 }
 
 static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action,
@@ -1368,8 +1321,9 @@ void iommu_init_early_pSeries(void)
 	if (firmware_has_feature(FW_FEATURE_LPAR)) {
 		pseries_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pSeriesLP;
 		pseries_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pSeriesLP;
-		ppc_md.dma_set_mask = dma_set_mask_pSeriesLP;
-		ppc_md.dma_get_required_mask = dma_get_required_mask_pSeriesLP;
+		if (!disable_ddw)
+			pseries_pci_controller_ops.iommu_bypass_supported =
+				iommu_bypass_supported_pSeriesLP;
 	} else {
 		pseries_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pSeries;
 		pseries_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pSeries;
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 12/34] powerpc/cell: move dma direct window setup out of dma_configure
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (10 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 11/34] powerpc/pseries: use the generic iommu bypass code Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-12-09 10:23   ` Michael Ellerman
  2018-11-14  8:22 ` [PATCH 13/34] powerpc/cell: use the generic iommu bypass code Christoph Hellwig
                   ` (24 subsequent siblings)
  36 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Configure the dma settings at device setup time, and stop playing games
with get_pci_dma_ops.  This prepares for using the common dma_configure
code later on.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/platforms/cell/iommu.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 12352a58072a..cce5bf9515e5 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -657,14 +657,21 @@ static const struct dma_map_ops dma_iommu_fixed_ops = {
 	.mapping_error	= dma_iommu_mapping_error,
 };
 
+static u64 cell_iommu_get_fixed_address(struct device *dev);
+
 static void cell_dma_dev_setup(struct device *dev)
 {
-	if (get_pci_dma_ops() == &dma_iommu_ops)
+	if (get_pci_dma_ops() == &dma_iommu_ops) {
+		u64 addr = cell_iommu_get_fixed_address(dev);
+
+		if (addr != OF_BAD_ADDR)
+			set_dma_offset(dev, addr + dma_iommu_fixed_base);
 		set_iommu_table_base(dev, cell_get_iommu_table(dev));
-	else if (get_pci_dma_ops() == &dma_nommu_ops)
+	} else if (get_pci_dma_ops() == &dma_nommu_ops) {
 		set_dma_offset(dev, cell_dma_nommu_offset);
-	else
+	} else {
 		BUG();
+	}
 }
 
 static void cell_pci_dma_dev_setup(struct pci_dev *dev)
@@ -950,19 +957,14 @@ static int dma_suported_and_switch(struct device *dev, u64 dma_mask)
 {
 	if (dma_mask == DMA_BIT_MASK(64) &&
 	    cell_iommu_get_fixed_address(dev) != OF_BAD_ADDR) {
-		u64 addr = cell_iommu_get_fixed_address(dev) +
-			dma_iommu_fixed_base;
 		dev_dbg(dev, "iommu: 64-bit OK, using fixed ops\n");
-		dev_dbg(dev, "iommu: fixed addr = %llx\n", addr);
 		set_dma_ops(dev, &dma_iommu_fixed_ops);
-		set_dma_offset(dev, addr);
 		return 1;
 	}
 
 	if (dma_iommu_dma_supported(dev, dma_mask)) {
 		dev_dbg(dev, "iommu: not 64-bit, using default ops\n");
-		set_dma_ops(dev, get_pci_dma_ops());
-		cell_dma_dev_setup(dev);
+		set_dma_ops(dev, &dma_iommu_ops);
 		return 1;
 	}
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 13/34] powerpc/cell: use the generic iommu bypass code
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (11 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 12/34] powerpc/cell: move dma direct window setup out of dma_configure Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 14/34] powerpc/dart: remove dead cleanup code in iommu_init_early_dart Christoph Hellwig
                   ` (23 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

This gets rid of a lot of clumsy code and finally allows us to mark
dma_iommu_ops const.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/dma-mapping.h |   2 +-
 arch/powerpc/include/asm/iommu.h       |   6 ++
 arch/powerpc/kernel/dma-iommu.c        |   7 +-
 arch/powerpc/platforms/cell/iommu.c    | 143 ++-----------------------
 4 files changed, 22 insertions(+), 136 deletions(-)

diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 824f55995a18..140ce5ad3120 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -74,7 +74,7 @@ static inline unsigned long device_to_mask(struct device *dev)
  * Available generic sets of operations
  */
 #ifdef CONFIG_PPC64
-extern struct dma_map_ops dma_iommu_ops;
+extern const struct dma_map_ops dma_iommu_ops;
 #endif
 extern const struct dma_map_ops dma_nommu_ops;
 
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 75daa10f31a4..5128aac8e165 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -326,5 +326,11 @@ extern void iommu_release_ownership(struct iommu_table *tbl);
 extern enum dma_data_direction iommu_tce_direction(unsigned long tce);
 extern unsigned long iommu_direction_to_tce_perm(enum dma_data_direction dir);
 
+#ifdef CONFIG_PPC_CELL_NATIVE
+extern bool iommu_fixed_is_weak;
+#else
+#define iommu_fixed_is_weak false
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_IOMMU_H */
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 459be16f8334..4937b39e246b 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -20,14 +20,15 @@
  */
 static inline bool dma_iommu_alloc_bypass(struct device *dev)
 {
-	return dev->archdata.iommu_bypass &&
+	return dev->archdata.iommu_bypass && !iommu_fixed_is_weak &&
 		dma_nommu_dma_supported(dev, dev->coherent_dma_mask);
 }
 
 static inline bool dma_iommu_map_bypass(struct device *dev,
 		unsigned long attrs)
 {
-	return dev->archdata.iommu_bypass;
+	return dev->archdata.iommu_bypass &&
+		(!iommu_fixed_is_weak || (attrs & DMA_ATTR_WEAK_ORDERING));
 }
 
 /* Allocates a contiguous real buffer and creates mappings over it.
@@ -168,7 +169,7 @@ int dma_iommu_mapping_error(struct device *dev, dma_addr_t dma_addr)
 	return dma_addr == IOMMU_MAPPING_ERROR;
 }
 
-struct dma_map_ops dma_iommu_ops = {
+const struct dma_map_ops dma_iommu_ops = {
 	.alloc			= dma_iommu_alloc_coherent,
 	.free			= dma_iommu_free_coherent,
 	.mmap			= dma_nommu_mmap_coherent,
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index cce5bf9515e5..fb51f78035ce 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -546,7 +546,7 @@ static unsigned long cell_dma_nommu_offset;
 static unsigned long dma_iommu_fixed_base;
 
 /* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */
-static int iommu_fixed_is_weak;
+bool iommu_fixed_is_weak;
 
 static struct iommu_table *cell_get_iommu_table(struct device *dev)
 {
@@ -568,95 +568,6 @@ static struct iommu_table *cell_get_iommu_table(struct device *dev)
 	return &window->table;
 }
 
-/* A coherent allocation implies strong ordering */
-
-static void *dma_fixed_alloc_coherent(struct device *dev, size_t size,
-				      dma_addr_t *dma_handle, gfp_t flag,
-				      unsigned long attrs)
-{
-	if (iommu_fixed_is_weak)
-		return iommu_alloc_coherent(dev, cell_get_iommu_table(dev),
-					    size, dma_handle,
-					    device_to_mask(dev), flag,
-					    dev_to_node(dev));
-	else
-		return dma_nommu_ops.alloc(dev, size, dma_handle, flag,
-					    attrs);
-}
-
-static void dma_fixed_free_coherent(struct device *dev, size_t size,
-				    void *vaddr, dma_addr_t dma_handle,
-				    unsigned long attrs)
-{
-	if (iommu_fixed_is_weak)
-		iommu_free_coherent(cell_get_iommu_table(dev), size, vaddr,
-				    dma_handle);
-	else
-		dma_nommu_ops.free(dev, size, vaddr, dma_handle, attrs);
-}
-
-static dma_addr_t dma_fixed_map_page(struct device *dev, struct page *page,
-				     unsigned long offset, size_t size,
-				     enum dma_data_direction direction,
-				     unsigned long attrs)
-{
-	if (iommu_fixed_is_weak == (attrs & DMA_ATTR_WEAK_ORDERING))
-		return dma_nommu_ops.map_page(dev, page, offset, size,
-					       direction, attrs);
-	else
-		return iommu_map_page(dev, cell_get_iommu_table(dev), page,
-				      offset, size, device_to_mask(dev),
-				      direction, attrs);
-}
-
-static void dma_fixed_unmap_page(struct device *dev, dma_addr_t dma_addr,
-				 size_t size, enum dma_data_direction direction,
-				 unsigned long attrs)
-{
-	if (iommu_fixed_is_weak == (attrs & DMA_ATTR_WEAK_ORDERING))
-		dma_nommu_ops.unmap_page(dev, dma_addr, size, direction,
-					  attrs);
-	else
-		iommu_unmap_page(cell_get_iommu_table(dev), dma_addr, size,
-				 direction, attrs);
-}
-
-static int dma_fixed_map_sg(struct device *dev, struct scatterlist *sg,
-			   int nents, enum dma_data_direction direction,
-			   unsigned long attrs)
-{
-	if (iommu_fixed_is_weak == (attrs & DMA_ATTR_WEAK_ORDERING))
-		return dma_nommu_ops.map_sg(dev, sg, nents, direction, attrs);
-	else
-		return ppc_iommu_map_sg(dev, cell_get_iommu_table(dev), sg,
-					nents, device_to_mask(dev),
-					direction, attrs);
-}
-
-static void dma_fixed_unmap_sg(struct device *dev, struct scatterlist *sg,
-			       int nents, enum dma_data_direction direction,
-			       unsigned long attrs)
-{
-	if (iommu_fixed_is_weak == (attrs & DMA_ATTR_WEAK_ORDERING))
-		dma_nommu_ops.unmap_sg(dev, sg, nents, direction, attrs);
-	else
-		ppc_iommu_unmap_sg(cell_get_iommu_table(dev), sg, nents,
-				   direction, attrs);
-}
-
-static int dma_suported_and_switch(struct device *dev, u64 dma_mask);
-
-static const struct dma_map_ops dma_iommu_fixed_ops = {
-	.alloc          = dma_fixed_alloc_coherent,
-	.free           = dma_fixed_free_coherent,
-	.map_sg         = dma_fixed_map_sg,
-	.unmap_sg       = dma_fixed_unmap_sg,
-	.dma_supported  = dma_suported_and_switch,
-	.map_page       = dma_fixed_map_page,
-	.unmap_page     = dma_fixed_unmap_page,
-	.mapping_error	= dma_iommu_mapping_error,
-};
-
 static u64 cell_iommu_get_fixed_address(struct device *dev);
 
 static void cell_dma_dev_setup(struct device *dev)
@@ -953,22 +864,10 @@ static u64 cell_iommu_get_fixed_address(struct device *dev)
 	return dev_addr;
 }
 
-static int dma_suported_and_switch(struct device *dev, u64 dma_mask)
+static bool cell_pci_iommu_bypass_supported(struct pci_dev *pdev, u64 mask)
 {
-	if (dma_mask == DMA_BIT_MASK(64) &&
-	    cell_iommu_get_fixed_address(dev) != OF_BAD_ADDR) {
-		dev_dbg(dev, "iommu: 64-bit OK, using fixed ops\n");
-		set_dma_ops(dev, &dma_iommu_fixed_ops);
-		return 1;
-	}
-
-	if (dma_iommu_dma_supported(dev, dma_mask)) {
-		dev_dbg(dev, "iommu: not 64-bit, using default ops\n");
-		set_dma_ops(dev, &dma_iommu_ops);
-		return 1;
-	}
-
-	return 0;
+	return mask == DMA_BIT_MASK(64) &&
+		cell_iommu_get_fixed_address(&pdev->dev) != OF_BAD_ADDR;
 }
 
 static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
@@ -1122,9 +1021,6 @@ static int __init cell_iommu_fixed_mapping_init(void)
 		cell_iommu_setup_window(iommu, np, dbase, dsize, 0);
 	}
 
-	dma_iommu_ops.dma_supported = dma_suported_and_switch;
-	set_pci_dma_ops(&dma_iommu_ops);
-
 	return 0;
 }
 
@@ -1145,7 +1041,7 @@ static int __init setup_iommu_fixed(char *str)
 	pciep = of_find_node_by_type(NULL, "pcie-endpoint");
 
 	if (strcmp(str, "weak") == 0 || (pciep && strcmp(str, "strong") != 0))
-		iommu_fixed_is_weak = DMA_ATTR_WEAK_ORDERING;
+		iommu_fixed_is_weak = true;
 
 	of_node_put(pciep);
 
@@ -1153,26 +1049,6 @@ static int __init setup_iommu_fixed(char *str)
 }
 __setup("iommu_fixed=", setup_iommu_fixed);
 
-static u64 cell_dma_get_required_mask(struct device *dev)
-{
-	const struct dma_map_ops *dma_ops;
-
-	if (!dev->dma_mask)
-		return 0;
-
-	if (!iommu_fixed_disabled &&
-			cell_iommu_get_fixed_address(dev) != OF_BAD_ADDR)
-		return DMA_BIT_MASK(64);
-
-	dma_ops = get_dma_ops(dev);
-	if (dma_ops->get_required_mask)
-		return dma_ops->get_required_mask(dev);
-
-	WARN_ONCE(1, "no get_required_mask in %p ops", dma_ops);
-
-	return DMA_BIT_MASK(64);
-}
-
 static int __init cell_iommu_init(void)
 {
 	struct device_node *np;
@@ -1189,10 +1065,9 @@ static int __init cell_iommu_init(void)
 
 	/* Setup various callbacks */
 	cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup;
-	ppc_md.dma_get_required_mask = cell_dma_get_required_mask;
 
 	if (!iommu_fixed_disabled && cell_iommu_fixed_mapping_init() == 0)
-		goto bail;
+		goto done;
 
 	/* Create an iommu for each /axon node.  */
 	for_each_node_by_name(np, "axon") {
@@ -1209,8 +1084,12 @@ static int __init cell_iommu_init(void)
 			continue;
 		cell_iommu_init_one(np, SPIDER_DMA_OFFSET);
 	}
-
+ done:
 	/* Setup default PCI iommu ops */
+	if (!iommu_fixed_disabled) {
+		cell_pci_controller_ops.iommu_bypass_supported =
+				cell_pci_iommu_bypass_supported;
+	}
 	set_pci_dma_ops(&dma_iommu_ops);
 
  bail:
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 14/34] powerpc/dart: remove dead cleanup code in iommu_init_early_dart
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (12 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 13/34] powerpc/cell: use the generic iommu bypass code Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-12-06 14:11   ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 15/34] powerpc/dart: use the generic iommu bypass code Christoph Hellwig
                   ` (22 subsequent siblings)
  36 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

If dart_init failed we didn't have a chance to setup dma or controller
ops yet, so there is no point in resetting them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/sysdev/dart_iommu.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index a5b40d1460f1..283ce04c5844 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -428,7 +428,7 @@ void __init iommu_init_early_dart(struct pci_controller_ops *controller_ops)
 
 	/* Initialize the DART HW */
 	if (dart_init(dn) != 0)
-		goto bail;
+		return;
 
 	/* Setup bypass if supported */
 	if (dart_is_u4)
@@ -439,15 +439,6 @@ void __init iommu_init_early_dart(struct pci_controller_ops *controller_ops)
 
 	/* Setup pci_dma ops */
 	set_pci_dma_ops(&dma_iommu_ops);
-	return;
-
- bail:
-	/* If init failed, use direct iommu and null setup functions */
-	controller_ops->dma_dev_setup = NULL;
-	controller_ops->dma_bus_setup = NULL;
-
-	/* Setup pci_dma ops */
-	set_pci_dma_ops(&dma_nommu_ops);
 }
 
 #ifdef CONFIG_PM
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 15/34] powerpc/dart: use the generic iommu bypass code
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (13 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 14/34] powerpc/dart: remove dead cleanup code in iommu_init_early_dart Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 16/34] powerpc/powernv: remove pnv_pci_ioda_pe_single_vendor Christoph Hellwig
                   ` (21 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Use the generic iommu bypass code instead of overriding set_dma_mask.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/sysdev/dart_iommu.c | 45 +++++++++++---------------------
 1 file changed, 15 insertions(+), 30 deletions(-)

diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 283ce04c5844..2681a19347ba 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -360,13 +360,6 @@ static void iommu_table_dart_setup(void)
 	set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map);
 }
 
-static void pci_dma_dev_setup_dart(struct pci_dev *dev)
-{
-	if (dart_is_u4)
-		set_dma_offset(&dev->dev, DART_U4_BYPASS_BASE);
-	set_iommu_table_base(&dev->dev, &iommu_table_dart);
-}
-
 static void pci_dma_bus_setup_dart(struct pci_bus *bus)
 {
 	if (!iommu_table_dart_inited) {
@@ -390,27 +383,16 @@ static bool dart_device_on_pcie(struct device *dev)
 	return false;
 }
 
-static int dart_dma_set_mask(struct device *dev, u64 dma_mask)
+static void pci_dma_dev_setup_dart(struct pci_dev *dev)
 {
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
-	/* U4 supports a DART bypass, we use it for 64-bit capable
-	 * devices to improve performances. However, that only works
-	 * for devices connected to U4 own PCIe interface, not bridged
-	 * through hypertransport. We need the device to support at
-	 * least 40 bits of addresses.
-	 */
-	if (dart_device_on_pcie(dev) && dma_mask >= DMA_BIT_MASK(40)) {
-		dev_info(dev, "Using 64-bit DMA iommu bypass\n");
-		set_dma_ops(dev, &dma_nommu_ops);
-	} else {
-		dev_info(dev, "Using 32-bit DMA via iommu\n");
-		set_dma_ops(dev, &dma_iommu_ops);
-	}
+	if (dart_is_u4 && dart_device_on_pcie(&dev->dev))
+		set_dma_offset(&dev->dev, DART_U4_BYPASS_BASE);
+	set_iommu_table_base(&dev->dev, &iommu_table_dart);
+}
 
-	*dev->dma_mask = dma_mask;
-	return 0;
+static bool iommu_bypass_supported_dart(struct pci_dev *dev, u64 mask)
+{
+	return dart_is_u4 && dart_device_on_pcie(&dev->dev);
 }
 
 void __init iommu_init_early_dart(struct pci_controller_ops *controller_ops)
@@ -430,12 +412,15 @@ void __init iommu_init_early_dart(struct pci_controller_ops *controller_ops)
 	if (dart_init(dn) != 0)
 		return;
 
-	/* Setup bypass if supported */
-	if (dart_is_u4)
-		ppc_md.dma_set_mask = dart_dma_set_mask;
-
+	/*
+	 * U4 supports a DART bypass, we use it for 64-bit capable devices to
+	 * improve performance.  However, that only works for devices connected
+	 * to the U4 own PCIe interface, not bridged through hypertransport.
+	 * We need the device to support at least 40 bits of addresses.
+	 */
 	controller_ops->dma_dev_setup = pci_dma_dev_setup_dart;
 	controller_ops->dma_bus_setup = pci_dma_bus_setup_dart;
+	controller_ops->iommu_bypass_supported = iommu_bypass_supported_dart;
 
 	/* Setup pci_dma ops */
 	set_pci_dma_ops(&dma_iommu_ops);
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 16/34] powerpc/powernv: remove pnv_pci_ioda_pe_single_vendor
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (14 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 15/34] powerpc/dart: use the generic iommu bypass code Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 17/34] powerpc/powernv: remove pnv_npu_dma_set_mask Christoph Hellwig
                   ` (20 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

This function is completely bogus - the fact that two PCIe devices come
from the same vendor has absolutely nothing to say about the DMA
capabilities and characteristics.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 28 ++---------------------
 1 file changed, 2 insertions(+), 26 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index dd807446801e..afbb73cd3c5b 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1745,31 +1745,6 @@ static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev
 	 */
 }
 
-static bool pnv_pci_ioda_pe_single_vendor(struct pnv_ioda_pe *pe)
-{
-	unsigned short vendor = 0;
-	struct pci_dev *pdev;
-
-	if (pe->device_count == 1)
-		return true;
-
-	/* pe->pdev should be set if it's a single device, pe->pbus if not */
-	if (!pe->pbus)
-		return true;
-
-	list_for_each_entry(pdev, &pe->pbus->devices, bus_list) {
-		if (!vendor) {
-			vendor = pdev->vendor;
-			continue;
-		}
-
-		if (pdev->vendor != vendor)
-			return false;
-	}
-
-	return true;
-}
-
 /*
  * Reconfigure TVE#0 to be usable as 64-bit DMA space.
  *
@@ -1870,7 +1845,8 @@ static int pnv_pci_ioda_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
 		 */
 		if (dma_mask >> 32 &&
 		    dma_mask > (memory_hotplug_max() + (1ULL << 32)) &&
-		    pnv_pci_ioda_pe_single_vendor(pe) &&
+		    /* pe->pdev should be set if it's a single device, pe->pbus if not */
+		    (pe->device_count == 1 || !pe->pbus) &&
 		    phb->model == PNV_PHB_MODEL_PHB3) {
 			/* Configure the bypass mode */
 			rc = pnv_pci_ioda_dma_64bit_bypass(pe);
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 17/34] powerpc/powernv: remove pnv_npu_dma_set_mask
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (15 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 16/34] powerpc/powernv: remove pnv_pci_ioda_pe_single_vendor Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 18/34] powerpc/powernv: use the generic iommu bypass code Christoph Hellwig
                   ` (19 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

These devices are not PCIe devices and do not have associated dma map
ops, so this is just dead code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index afbb73cd3c5b..1d9f446f3eff 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -3688,14 +3688,6 @@ static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
 	.shutdown		= pnv_pci_ioda_shutdown,
 };
 
-static int pnv_npu_dma_set_mask(struct pci_dev *npdev, u64 dma_mask)
-{
-	dev_err_once(&npdev->dev,
-			"%s operation unsupported for NVLink devices\n",
-			__func__);
-	return -EPERM;
-}
-
 static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
 	.dma_dev_setup		= pnv_pci_dma_dev_setup,
 #ifdef CONFIG_PCI_MSI
@@ -3705,7 +3697,6 @@ static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
 	.enable_device_hook	= pnv_pci_enable_device_hook,
 	.window_alignment	= pnv_pci_window_alignment,
 	.reset_secondary_bus	= pnv_pci_reset_secondary_bus,
-	.dma_set_mask		= pnv_npu_dma_set_mask,
 	.shutdown		= pnv_pci_ioda_shutdown,
 };
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 18/34] powerpc/powernv: use the generic iommu bypass code
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (16 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 17/34] powerpc/powernv: remove pnv_npu_dma_set_mask Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-11-14  8:22 ` [PATCH 19/34] cxl: drop the dma_set_mask callback from vphb Christoph Hellwig
                   ` (18 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Use the generic iommu bypass code instead of overriding set_dma_mask.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 95 ++++++-----------------
 1 file changed, 25 insertions(+), 70 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 1d9f446f3eff..23fd46cd2ab3 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1814,89 +1814,45 @@ static int pnv_pci_ioda_dma_64bit_bypass(struct pnv_ioda_pe *pe)
 	return -EIO;
 }
 
-static int pnv_pci_ioda_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
+static bool pnv_pci_ioda_iommu_bypass_supported(struct pci_dev *pdev,
+		u64 dma_mask)
 {
 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
 	struct pnv_phb *phb = hose->private_data;
 	struct pci_dn *pdn = pci_get_pdn(pdev);
 	struct pnv_ioda_pe *pe;
-	uint64_t top;
-	bool bypass = false;
-	s64 rc;
 
 	if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
 		return -ENODEV;
 
 	pe = &phb->ioda.pe_array[pdn->pe_number];
 	if (pe->tce_bypass_enabled) {
-		top = pe->tce_bypass_base + memblock_end_of_DRAM() - 1;
-		bypass = (dma_mask >= top);
+		u64 top = pe->tce_bypass_base + memblock_end_of_DRAM() - 1;
+		if (dma_mask >= top)
+			return true;
 	}
 
-	if (bypass) {
-		dev_info(&pdev->dev, "Using 64-bit DMA iommu bypass\n");
-		set_dma_ops(&pdev->dev, &dma_nommu_ops);
-	} else {
-		/*
-		 * If the device can't set the TCE bypass bit but still wants
-		 * to access 4GB or more, on PHB3 we can reconfigure TVE#0 to
-		 * bypass the 32-bit region and be usable for 64-bit DMAs.
-		 * The device needs to be able to address all of this space.
-		 */
-		if (dma_mask >> 32 &&
-		    dma_mask > (memory_hotplug_max() + (1ULL << 32)) &&
-		    /* pe->pdev should be set if it's a single device, pe->pbus if not */
-		    (pe->device_count == 1 || !pe->pbus) &&
-		    phb->model == PNV_PHB_MODEL_PHB3) {
-			/* Configure the bypass mode */
-			rc = pnv_pci_ioda_dma_64bit_bypass(pe);
-			if (rc)
-				return rc;
-			/* 4GB offset bypasses 32-bit space */
-			set_dma_offset(&pdev->dev, (1ULL << 32));
-			set_dma_ops(&pdev->dev, &dma_nommu_ops);
-		} else if (dma_mask >> 32 && dma_mask != DMA_BIT_MASK(64)) {
-			/*
-			 * Fail the request if a DMA mask between 32 and 64 bits
-			 * was requested but couldn't be fulfilled. Ideally we
-			 * would do this for 64-bits but historically we have
-			 * always fallen back to 32-bits.
-			 */
-			return -ENOMEM;
-		} else {
-			dev_info(&pdev->dev, "Using 32-bit DMA via iommu\n");
-			set_dma_ops(&pdev->dev, &dma_iommu_ops);
-		}
+	/*
+	 * If the device can't set the TCE bypass bit but still wants
+	 * to access 4GB or more, on PHB3 we can reconfigure TVE#0 to
+	 * bypass the 32-bit region and be usable for 64-bit DMAs.
+	 * The device needs to be able to address all of this space.
+	 */
+	if (dma_mask >> 32 &&
+	    dma_mask > (memory_hotplug_max() + (1ULL << 32)) &&
+	    /* pe->pdev should be set if it's a single device, pe->pbus if not */
+	    (pe->device_count == 1 || !pe->pbus) &&
+	    phb->model == PNV_PHB_MODEL_PHB3) {
+		/* Configure the bypass mode */
+		s64 rc = pnv_pci_ioda_dma_64bit_bypass(pe);
+		if (rc)
+			return rc;
+		/* 4GB offset bypasses 32-bit space */
+		set_dma_offset(&pdev->dev, (1ULL << 32));
+		return true;
 	}
-	*pdev->dev.dma_mask = dma_mask;
-
-	/* Update peer npu devices */
-	pnv_npu_try_dma_set_bypass(pdev, bypass);
-
-	return 0;
-}
-
-static u64 pnv_pci_ioda_dma_get_required_mask(struct pci_dev *pdev)
-{
-	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
-	struct pnv_phb *phb = hose->private_data;
-	struct pci_dn *pdn = pci_get_pdn(pdev);
-	struct pnv_ioda_pe *pe;
-	u64 end, mask;
 
-	if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
-		return 0;
-
-	pe = &phb->ioda.pe_array[pdn->pe_number];
-	if (!pe->tce_bypass_enabled)
-		return __dma_get_required_mask(&pdev->dev);
-
-
-	end = pe->tce_bypass_base + memblock_end_of_DRAM();
-	mask = 1ULL << (fls64(end) - 1);
-	mask += mask - 1;
-
-	return mask;
+	return false;
 }
 
 static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe,
@@ -3674,6 +3630,7 @@ static void pnv_pci_ioda_shutdown(struct pci_controller *hose)
 static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
 	.dma_dev_setup		= pnv_pci_dma_dev_setup,
 	.dma_bus_setup		= pnv_pci_dma_bus_setup,
+	.iommu_bypass_supported	= pnv_pci_ioda_iommu_bypass_supported,
 #ifdef CONFIG_PCI_MSI
 	.setup_msi_irqs		= pnv_setup_msi_irqs,
 	.teardown_msi_irqs	= pnv_teardown_msi_irqs,
@@ -3683,8 +3640,6 @@ static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
 	.window_alignment	= pnv_pci_window_alignment,
 	.setup_bridge		= pnv_pci_setup_bridge,
 	.reset_secondary_bus	= pnv_pci_reset_secondary_bus,
-	.dma_set_mask		= pnv_pci_ioda_dma_set_mask,
-	.dma_get_required_mask	= pnv_pci_ioda_dma_get_required_mask,
 	.shutdown		= pnv_pci_ioda_shutdown,
 };
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 19/34] cxl: drop the dma_set_mask callback from vphb
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (17 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 18/34] powerpc/powernv: use the generic iommu bypass code Christoph Hellwig
@ 2018-11-14  8:22 ` Christoph Hellwig
  2018-12-06 14:10   ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 20/34] powerpc/dma: stop overriding dma_get_required_mask Christoph Hellwig
                   ` (17 subsequent siblings)
  36 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:22 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

The CXL code never even looks at the dma mask, so there is no good
reason for this sanity check.  Remove it because it gets in the way
of the dma ops refactoring.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/misc/cxl/vphb.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c
index 7908633d9204..49da2f744bbf 100644
--- a/drivers/misc/cxl/vphb.c
+++ b/drivers/misc/cxl/vphb.c
@@ -11,17 +11,6 @@
 #include <misc/cxl.h>
 #include "cxl.h"
 
-static int cxl_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
-{
-	if (dma_mask < DMA_BIT_MASK(64)) {
-		pr_info("%s only 64bit DMA supported on CXL", __func__);
-		return -EIO;
-	}
-
-	*(pdev->dev.dma_mask) = dma_mask;
-	return 0;
-}
-
 static int cxl_pci_probe_mode(struct pci_bus *bus)
 {
 	return PCI_PROBE_NORMAL;
@@ -220,7 +209,6 @@ static struct pci_controller_ops cxl_pci_controller_ops =
 	.reset_secondary_bus = cxl_pci_reset_secondary_bus,
 	.setup_msi_irqs = cxl_setup_msi_irqs,
 	.teardown_msi_irqs = cxl_teardown_msi_irqs,
-	.dma_set_mask = cxl_dma_set_mask,
 };
 
 int cxl_pci_vphb_add(struct cxl_afu *afu)
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 20/34] powerpc/dma: stop overriding dma_get_required_mask
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (18 preceding siblings ...)
  2018-11-14  8:22 ` [PATCH 19/34] cxl: drop the dma_set_mask callback from vphb Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 21/34] powerpc/pci: remove the dma_set_mask pci_controller ops methods Christoph Hellwig
                   ` (16 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

The ppc_md and pci_controller_ops methods are unused now and can be
removed.  The dma_nommu implementation is generic to the generic one
except for using max_pfn instead of calling into the memblock API,
and all other dma_map_ops instances implement a method of their own.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/device.h      |  2 --
 arch/powerpc/include/asm/dma-mapping.h |  2 --
 arch/powerpc/include/asm/machdep.h     |  2 --
 arch/powerpc/include/asm/pci-bridge.h  |  1 -
 arch/powerpc/kernel/dma.c              | 30 --------------------------
 drivers/base/platform.c                |  2 --
 6 files changed, 39 deletions(-)

diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 1aa53318b4bc..3814e1c2d4bc 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -59,6 +59,4 @@ struct pdev_archdata {
 	u64 dma_mask;
 };
 
-#define ARCH_HAS_DMA_GET_REQUIRED_MASK
-
 #endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 140ce5ad3120..e5ee4ac97c14 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -113,7 +113,5 @@ static inline void set_dma_offset(struct device *dev, dma_addr_t off)
 #define HAVE_ARCH_DMA_SET_MASK 1
 extern int dma_set_mask(struct device *dev, u64 dma_mask);
 
-extern u64 __dma_get_required_mask(struct device *dev);
-
 #endif /* __KERNEL__ */
 #endif	/* _ASM_DMA_MAPPING_H */
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 8311869005fa..7b70dcbce1b9 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -47,9 +47,7 @@ struct machdep_calls {
 #endif
 #endif /* CONFIG_PPC64 */
 
-	/* Platform set_dma_mask and dma_get_required_mask overrides */
 	int		(*dma_set_mask)(struct device *dev, u64 dma_mask);
-	u64		(*dma_get_required_mask)(struct device *dev);
 
 	int		(*probe)(void);
 	void		(*setup_arch)(void); /* Optional, may be NULL */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 5c7a1e7ffc8a..aace7033fa02 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -46,7 +46,6 @@ struct pci_controller_ops {
 #endif
 
 	int             (*dma_set_mask)(struct pci_dev *pdev, u64 dma_mask);
-	u64		(*dma_get_required_mask)(struct pci_dev *pdev);
 
 	void		(*shutdown)(struct pci_controller *hose);
 };
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 6c368b6820bb..154e1cdae7f9 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -246,7 +246,6 @@ const struct dma_map_ops dma_nommu_ops = {
 	.map_sg				= dma_nommu_map_sg,
 	.dma_supported			= dma_nommu_dma_supported,
 	.map_page			= dma_nommu_map_page,
-	.get_required_mask		= dma_nommu_get_required_mask,
 #ifdef CONFIG_NOT_COHERENT_CACHE
 	.sync_single_for_cpu 		= dma_nommu_sync_single,
 	.sync_single_for_device 	= dma_nommu_sync_single,
@@ -294,35 +293,6 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
 }
 EXPORT_SYMBOL(dma_set_mask);
 
-u64 __dma_get_required_mask(struct device *dev)
-{
-	const struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	if (unlikely(dma_ops == NULL))
-		return 0;
-
-	if (dma_ops->get_required_mask)
-		return dma_ops->get_required_mask(dev);
-
-	return DMA_BIT_MASK(8 * sizeof(dma_addr_t));
-}
-
-u64 dma_get_required_mask(struct device *dev)
-{
-	if (ppc_md.dma_get_required_mask)
-		return ppc_md.dma_get_required_mask(dev);
-
-	if (dev_is_pci(dev)) {
-		struct pci_dev *pdev = to_pci_dev(dev);
-		struct pci_controller *phb = pci_bus_to_host(pdev->bus);
-		if (phb->controller_ops.dma_get_required_mask)
-			return phb->controller_ops.dma_get_required_mask(pdev);
-	}
-
-	return __dma_get_required_mask(dev);
-}
-EXPORT_SYMBOL_GPL(dma_get_required_mask);
-
 static int __init dma_init(void)
 {
 #ifdef CONFIG_IBMVIO
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 41b91af95afb..648b6213e322 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -1179,7 +1179,6 @@ int __init platform_bus_init(void)
 	return error;
 }
 
-#ifndef ARCH_HAS_DMA_GET_REQUIRED_MASK
 static u64 dma_default_get_required_mask(struct device *dev)
 {
 	u32 low_totalram = ((max_pfn - 1) << PAGE_SHIFT);
@@ -1208,7 +1207,6 @@ u64 dma_get_required_mask(struct device *dev)
 	return dma_default_get_required_mask(dev);
 }
 EXPORT_SYMBOL_GPL(dma_get_required_mask);
-#endif
 
 static __initdata LIST_HEAD(early_platform_driver_list);
 static __initdata LIST_HEAD(early_platform_device_list);
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 21/34] powerpc/pci: remove the dma_set_mask pci_controller ops methods
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (19 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 20/34] powerpc/dma: stop overriding dma_get_required_mask Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 22/34] powerpc/dma: remove the iommu fallback for coherent allocations Christoph Hellwig
                   ` (15 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Unused now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/pci-bridge.h | 2 --
 arch/powerpc/kernel/dma.c             | 7 -------
 2 files changed, 9 deletions(-)

diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index aace7033fa02..a50703af7db3 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -45,8 +45,6 @@ struct pci_controller_ops {
 	void		(*teardown_msi_irqs)(struct pci_dev *pdev);
 #endif
 
-	int             (*dma_set_mask)(struct pci_dev *pdev, u64 dma_mask);
-
 	void		(*shutdown)(struct pci_controller *hose);
 };
 
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 154e1cdae7f9..829eb2fefc8c 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -279,13 +279,6 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
 	if (ppc_md.dma_set_mask)
 		return ppc_md.dma_set_mask(dev, dma_mask);
 
-	if (dev_is_pci(dev)) {
-		struct pci_dev *pdev = to_pci_dev(dev);
-		struct pci_controller *phb = pci_bus_to_host(pdev->bus);
-		if (phb->controller_ops.dma_set_mask)
-			return phb->controller_ops.dma_set_mask(pdev, dma_mask);
-	}
-
 	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
 		return -EIO;
 	*dev->dma_mask = dma_mask;
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 22/34] powerpc/dma: remove the iommu fallback for coherent allocations
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (20 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 21/34] powerpc/pci: remove the dma_set_mask pci_controller ops methods Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 23/34] powerpc/dma: remove get_pci_dma_ops Christoph Hellwig
                   ` (14 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

All iommu capable platforms now always use the iommu code with the
internal bypass, so there is not need for this magic anymore.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/Kconfig      |  4 ---
 arch/powerpc/kernel/dma.c | 68 ++-------------------------------------
 2 files changed, 2 insertions(+), 70 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index cffff3613bc1..2d4a19bc8023 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -119,9 +119,6 @@ config GENERIC_HWEIGHT
 	bool
 	default y
 
-config ARCH_HAS_DMA_SET_COHERENT_MASK
-        bool
-
 config PPC
 	bool
 	default y
@@ -129,7 +126,6 @@ config PPC
 	# Please keep this list sorted alphabetically.
 	#
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
-	select ARCH_HAS_DMA_SET_COHERENT_MASK
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FORTIFY_SOURCE
 	select ARCH_HAS_GCOV_PROFILE_ALL
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 829eb2fefc8c..f9f51fc505a1 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -114,51 +114,6 @@ void __dma_nommu_free_coherent(struct device *dev, size_t size,
 }
 #endif /* !CONFIG_NOT_COHERENT_CACHE */
 
-static void *dma_nommu_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t flag,
-				       unsigned long attrs)
-{
-	struct iommu_table *iommu;
-
-	/* The coherent mask may be smaller than the real mask, check if
-	 * we can really use the direct ops
-	 */
-	if (dma_nommu_dma_supported(dev, dev->coherent_dma_mask))
-		return __dma_nommu_alloc_coherent(dev, size, dma_handle,
-						   flag, attrs);
-
-	/* Ok we can't ... do we have an iommu ? If not, fail */
-	iommu = get_iommu_table_base(dev);
-	if (!iommu)
-		return NULL;
-
-	/* Try to use the iommu */
-	return iommu_alloc_coherent(dev, iommu, size, dma_handle,
-				    dev->coherent_dma_mask, flag,
-				    dev_to_node(dev));
-}
-
-static void dma_nommu_free_coherent(struct device *dev, size_t size,
-				     void *vaddr, dma_addr_t dma_handle,
-				     unsigned long attrs)
-{
-	struct iommu_table *iommu;
-
-	/* See comments in dma_nommu_alloc_coherent() */
-	if (dma_nommu_dma_supported(dev, dev->coherent_dma_mask))
-		return __dma_nommu_free_coherent(dev, size, vaddr, dma_handle,
-						  attrs);
-	/* Maybe we used an iommu ... */
-	iommu = get_iommu_table_base(dev);
-
-	/* If we hit that we should have never allocated in the first
-	 * place so how come we are freeing ?
-	 */
-	if (WARN_ON(!iommu))
-		return;
-	iommu_free_coherent(iommu, size, vaddr, dma_handle);
-}
-
 int dma_nommu_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
 			     void *cpu_addr, dma_addr_t handle, size_t size,
 			     unsigned long attrs)
@@ -240,8 +195,8 @@ static inline void dma_nommu_sync_single(struct device *dev,
 #endif
 
 const struct dma_map_ops dma_nommu_ops = {
-	.alloc				= dma_nommu_alloc_coherent,
-	.free				= dma_nommu_free_coherent,
+	.alloc				= __dma_nommu_alloc_coherent,
+	.free				= __dma_nommu_free_coherent,
 	.mmap				= dma_nommu_mmap_coherent,
 	.map_sg				= dma_nommu_map_sg,
 	.dma_supported			= dma_nommu_dma_supported,
@@ -255,25 +210,6 @@ const struct dma_map_ops dma_nommu_ops = {
 };
 EXPORT_SYMBOL(dma_nommu_ops);
 
-int dma_set_coherent_mask(struct device *dev, u64 mask)
-{
-	if (!dma_supported(dev, mask)) {
-		/*
-		 * We need to special case the direct DMA ops which can
-		 * support a fallback for coherent allocations. There
-		 * is no dma_op->set_coherent_mask() so we have to do
-		 * things the hard way:
-		 */
-		if (get_dma_ops(dev) != &dma_nommu_ops ||
-		    get_iommu_table_base(dev) == NULL ||
-		    !dma_iommu_dma_supported(dev, mask))
-			return -EIO;
-	}
-	dev->coherent_dma_mask = mask;
-	return 0;
-}
-EXPORT_SYMBOL(dma_set_coherent_mask);
-
 int dma_set_mask(struct device *dev, u64 dma_mask)
 {
 	if (ppc_md.dma_set_mask)
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 23/34] powerpc/dma: remove get_pci_dma_ops
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (21 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 22/34] powerpc/dma: remove the iommu fallback for coherent allocations Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 24/34] powerpc/dma: move pci_dma_dev_setup_swiotlb to fsl_pci.c Christoph Hellwig
                   ` (13 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

This function is only used by the Cell iommu code, which can keep track
if it is using the iommu internally just as good.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/pci.h      |  2 --
 arch/powerpc/kernel/pci-common.c    |  6 ------
 arch/powerpc/platforms/cell/iommu.c | 17 ++++++++---------
 3 files changed, 8 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 2af9ded80540..04c44c4b0acf 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -52,10 +52,8 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 
 #ifdef CONFIG_PCI
 extern void set_pci_dma_ops(const struct dma_map_ops *dma_ops);
-extern const struct dma_map_ops *get_pci_dma_ops(void);
 #else	/* CONFIG_PCI */
 #define set_pci_dma_ops(d)
-#define get_pci_dma_ops()	NULL
 #endif
 
 #ifdef CONFIG_PPC64
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 88e4f69a09e5..a84707680525 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -69,12 +69,6 @@ void set_pci_dma_ops(const struct dma_map_ops *dma_ops)
 	pci_dma_ops = dma_ops;
 }
 
-const struct dma_map_ops *get_pci_dma_ops(void)
-{
-	return pci_dma_ops;
-}
-EXPORT_SYMBOL(get_pci_dma_ops);
-
 /*
  * This function should run under locking protection, specifically
  * hose_spinlock.
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index fb51f78035ce..93c7e4aef571 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -544,6 +544,7 @@ static struct cbe_iommu *cell_iommu_for_node(int nid)
 static unsigned long cell_dma_nommu_offset;
 
 static unsigned long dma_iommu_fixed_base;
+static bool cell_iommu_enabled;
 
 /* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */
 bool iommu_fixed_is_weak;
@@ -572,16 +573,14 @@ static u64 cell_iommu_get_fixed_address(struct device *dev);
 
 static void cell_dma_dev_setup(struct device *dev)
 {
-	if (get_pci_dma_ops() == &dma_iommu_ops) {
+	if (cell_iommu_enabled) {
 		u64 addr = cell_iommu_get_fixed_address(dev);
 
 		if (addr != OF_BAD_ADDR)
 			set_dma_offset(dev, addr + dma_iommu_fixed_base);
 		set_iommu_table_base(dev, cell_get_iommu_table(dev));
-	} else if (get_pci_dma_ops() == &dma_nommu_ops) {
-		set_dma_offset(dev, cell_dma_nommu_offset);
 	} else {
-		BUG();
+		set_dma_offset(dev, cell_dma_nommu_offset);
 	}
 }
 
@@ -599,11 +598,11 @@ static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action,
 	if (action != BUS_NOTIFY_ADD_DEVICE)
 		return 0;
 
-	/* We use the PCI DMA ops */
-	dev->dma_ops = get_pci_dma_ops();
-
+	if (cell_iommu_enabled)
+		dev->dma_ops = &dma_iommu_ops;
+	else
+		dev->dma_ops = &dma_nommu_ops;
 	cell_dma_dev_setup(dev);
-
 	return 0;
 }
 
@@ -1091,7 +1090,7 @@ static int __init cell_iommu_init(void)
 				cell_pci_iommu_bypass_supported;
 	}
 	set_pci_dma_ops(&dma_iommu_ops);
-
+	cell_iommu_enabled = true;
  bail:
 	/* Register callbacks on OF platform device addition/removal
 	 * to handle linking them to the right DMA operations
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 24/34] powerpc/dma: move pci_dma_dev_setup_swiotlb to fsl_pci.c
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (22 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 23/34] powerpc/dma: remove get_pci_dma_ops Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 25/34] powerpc/dma: remove max_direct_dma_addr Christoph Hellwig
                   ` (12 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

pci_dma_dev_setup_swiotlb is only used by the fsl_pci code, and closely
related to it, so fsl_pci.c seems like a better place for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/swiotlb.h |  2 --
 arch/powerpc/kernel/dma-swiotlb.c  | 11 -----------
 arch/powerpc/sysdev/fsl_pci.c      |  9 +++++++++
 3 files changed, 9 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
index f65ecf57b66c..26a0f12b835b 100644
--- a/arch/powerpc/include/asm/swiotlb.h
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -18,8 +18,6 @@ extern const struct dma_map_ops powerpc_swiotlb_dma_ops;
 extern unsigned int ppc_swiotlb_enable;
 int __init swiotlb_setup_bus_notifier(void);
 
-extern void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev);
-
 #ifdef CONFIG_SWIOTLB
 void swiotlb_detect_4g(void);
 #else
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 678811abccfc..38a2c9f5ab54 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -63,17 +63,6 @@ const struct dma_map_ops powerpc_swiotlb_dma_ops = {
 	.get_required_mask = swiotlb_powerpc_get_required,
 };
 
-void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
-{
-	struct pci_controller *hose;
-	struct dev_archdata *sd;
-
-	hose = pci_bus_to_host(pdev->bus);
-	sd = &pdev->dev.archdata;
-	sd->max_direct_dma_addr =
-		hose->dma_window_base_cur + hose->dma_window_size;
-}
-
 static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
 				  unsigned long action, void *data)
 {
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 918be816b097..561f97d698cc 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -114,6 +114,15 @@ static struct pci_ops fsl_indirect_pcie_ops =
 static u64 pci64_dma_offset;
 
 #ifdef CONFIG_SWIOTLB
+static void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
+{
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct dev_archdata *sd = &pdev->dev.archdata;
+
+	sd->max_direct_dma_addr =
+		hose->dma_window_base_cur + hose->dma_window_size;
+}
+
 static void setup_swiotlb_ops(struct pci_controller *hose)
 {
 	if (ppc_swiotlb_enable) {
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 25/34] powerpc/dma: remove max_direct_dma_addr
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (23 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 24/34] powerpc/dma: move pci_dma_dev_setup_swiotlb to fsl_pci.c Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 26/34] powerpc/dma: fix an off-by-one in dma_capable Christoph Hellwig
                   ` (11 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

The max_direct_dma_addr duplicates the bus_dma_mask field in struct
device.  Use the generic field instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/device.h     |  3 ---
 arch/powerpc/include/asm/dma-direct.h |  4 +---
 arch/powerpc/kernel/dma-swiotlb.c     | 20 --------------------
 arch/powerpc/kernel/dma.c             |  5 ++---
 arch/powerpc/sysdev/fsl_pci.c         |  3 +--
 5 files changed, 4 insertions(+), 31 deletions(-)

diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 3814e1c2d4bc..a130be13ee83 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -38,9 +38,6 @@ struct dev_archdata {
 #ifdef CONFIG_IOMMU_API
 	void			*iommu_domain;
 #endif
-#ifdef CONFIG_SWIOTLB
-	dma_addr_t		max_direct_dma_addr;
-#endif
 #ifdef CONFIG_PPC64
 	struct pci_dn		*pci_data;
 #endif
diff --git a/arch/powerpc/include/asm/dma-direct.h b/arch/powerpc/include/asm/dma-direct.h
index 7702875aabb7..e00ab5d0612d 100644
--- a/arch/powerpc/include/asm/dma-direct.h
+++ b/arch/powerpc/include/asm/dma-direct.h
@@ -5,9 +5,7 @@
 static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 {
 #ifdef CONFIG_SWIOTLB
-	struct dev_archdata *sd = &dev->archdata;
-
-	if (sd->max_direct_dma_addr && addr + size > sd->max_direct_dma_addr)
+	if (dev->bus_dma_mask && addr + size > dev->bus_dma_mask)
 		return false;
 #endif
 
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 38a2c9f5ab54..62caa16b91a9 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -24,21 +24,6 @@
 
 unsigned int ppc_swiotlb_enable;
 
-static u64 swiotlb_powerpc_get_required(struct device *dev)
-{
-	u64 end, mask, max_direct_dma_addr = dev->archdata.max_direct_dma_addr;
-
-	end = memblock_end_of_DRAM();
-	if (max_direct_dma_addr && end > max_direct_dma_addr)
-		end = max_direct_dma_addr;
-	end += get_dma_offset(dev);
-
-	mask = 1ULL << (fls64(end) - 1);
-	mask += mask - 1;
-
-	return mask;
-}
-
 /*
  * At the moment, all platforms that use this code only require
  * swiotlb to be used if we're operating on HIGHMEM.  Since
@@ -60,22 +45,17 @@ const struct dma_map_ops powerpc_swiotlb_dma_ops = {
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
 	.sync_sg_for_device = swiotlb_sync_sg_for_device,
 	.mapping_error = dma_direct_mapping_error,
-	.get_required_mask = swiotlb_powerpc_get_required,
 };
 
 static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
 				  unsigned long action, void *data)
 {
 	struct device *dev = data;
-	struct dev_archdata *sd;
 
 	/* We are only intereted in device addition */
 	if (action != BUS_NOTIFY_ADD_DEVICE)
 		return 0;
 
-	sd = &dev->archdata;
-	sd->max_direct_dma_addr = 0;
-
 	/* May need to bounce if the device can't address all of DRAM */
 	if ((dma_get_mask(dev) + 1) < memblock_end_of_DRAM())
 		set_dma_ops(dev, &powerpc_swiotlb_dma_ops);
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index f9f51fc505a1..59f38ca3975c 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -30,11 +30,10 @@
 static u64 __maybe_unused get_pfn_limit(struct device *dev)
 {
 	u64 pfn = (dev->coherent_dma_mask >> PAGE_SHIFT) + 1;
-	struct dev_archdata __maybe_unused *sd = &dev->archdata;
 
 #ifdef CONFIG_SWIOTLB
-	if (sd->max_direct_dma_addr && dev->dma_ops == &powerpc_swiotlb_dma_ops)
-		pfn = min_t(u64, pfn, sd->max_direct_dma_addr >> PAGE_SHIFT);
+	if (dev->bus_dma_mask && dev->dma_ops == &powerpc_swiotlb_dma_ops)
+		pfn = min_t(u64, pfn, dev->bus_dma_mask >> PAGE_SHIFT);
 #endif
 
 	return pfn;
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 561f97d698cc..f136567a5ed5 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -117,9 +117,8 @@ static u64 pci64_dma_offset;
 static void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
 {
 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
-	struct dev_archdata *sd = &pdev->dev.archdata;
 
-	sd->max_direct_dma_addr =
+	pdev->dev.bus_dma_mask =
 		hose->dma_window_base_cur + hose->dma_window_size;
 }
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 26/34] powerpc/dma: fix an off-by-one in dma_capable
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (24 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 25/34] powerpc/dma: remove max_direct_dma_addr Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 27/34] powerpc/fsl_pci: simplify fsl_pci_dma_set_mask Christoph Hellwig
                   ` (10 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

We need to compare the last byte in the dma range and not the one after it
for the bus_dma_mask, just like we do for the regular dma_mask.  Fix this
cleanly by merging the two comparisms into one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/dma-direct.h | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/dma-direct.h b/arch/powerpc/include/asm/dma-direct.h
index e00ab5d0612d..92d8aed86422 100644
--- a/arch/powerpc/include/asm/dma-direct.h
+++ b/arch/powerpc/include/asm/dma-direct.h
@@ -4,15 +4,11 @@
 
 static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 {
-#ifdef CONFIG_SWIOTLB
-	if (dev->bus_dma_mask && addr + size > dev->bus_dma_mask)
-		return false;
-#endif
-
 	if (!dev->dma_mask)
 		return false;
 
-	return addr + size - 1 <= *dev->dma_mask;
+	return addr + size - 1 <=
+		min_not_zero(*dev->dma_mask, dev->bus_dma_mask);
 }
 
 static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 27/34] powerpc/fsl_pci: simplify fsl_pci_dma_set_mask
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (25 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 26/34] powerpc/dma: fix an off-by-one in dma_capable Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 28/34] dma-mapping, powerpc: simplify the arch dma_set_mask override Christoph Hellwig
                   ` (9 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

swiotlb will only bounce buffer the effectice dma address for the device
is smaller than the actual DMA range.  Instead of flipping between the
swiotlb and nommu ops for FSL SOCs that have the second outbound window
just don't set the bus dma_mask in this case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/sysdev/fsl_pci.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index f136567a5ed5..296ffabc9386 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -143,7 +143,7 @@ static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
 	 * mapping that allows addressing any RAM address from across PCI.
 	 */
 	if (dev_is_pci(dev) && dma_mask >= pci64_dma_offset * 2 - 1) {
-		set_dma_ops(dev, &dma_nommu_ops);
+		dev->bus_dma_mask = 0;
 		set_dma_offset(dev, pci64_dma_offset);
 	}
 
@@ -403,10 +403,6 @@ static void setup_pci_atmu(struct pci_controller *hose)
 				out_be32(&pci->piw[win_idx].piwar,  piwar);
 			}
 
-			/*
-			 * install our own dma_set_mask handler to fixup dma_ops
-			 * and dma_offset
-			 */
 			ppc_md.dma_set_mask = fsl_pci_dma_set_mask;
 
 			pr_info("%pOF: Setup 64-bit PCI DMA window\n", hose->dn);
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 28/34] dma-mapping, powerpc: simplify the arch dma_set_mask override
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (26 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 27/34] powerpc/fsl_pci: simplify fsl_pci_dma_set_mask Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 29/34] powerpc/dma: use phys_to_dma instead of get_dma_offset Christoph Hellwig
                   ` (8 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Instead of letting the architecture supply all of dma_set_mask just
give it an additional hook selected by Kconfig.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/Kconfig                   |  1 +
 arch/powerpc/include/asm/dma-mapping.h |  3 ---
 arch/powerpc/kernel/dma-swiotlb.c      |  8 ++++++++
 arch/powerpc/kernel/dma.c              | 12 ------------
 arch/powerpc/sysdev/fsl_pci.c          |  4 ----
 include/linux/dma-mapping.h            | 11 ++++++++---
 kernel/dma/Kconfig                     |  3 +++
 7 files changed, 20 insertions(+), 22 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2d4a19bc8023..4f03997ad54a 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -126,6 +126,7 @@ config PPC
 	# Please keep this list sorted alphabetically.
 	#
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
+	select ARCH_HAS_DMA_SET_MASK		if SWIOTLB
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FORTIFY_SOURCE
 	select ARCH_HAS_GCOV_PROFILE_ALL
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index e5ee4ac97c14..16d45518d9bb 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -110,8 +110,5 @@ static inline void set_dma_offset(struct device *dev, dma_addr_t off)
 		dev->archdata.dma_offset = off;
 }
 
-#define HAVE_ARCH_DMA_SET_MASK 1
-extern int dma_set_mask(struct device *dev, u64 dma_mask);
-
 #endif /* __KERNEL__ */
 #endif	/* _ASM_DMA_MAPPING_H */
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 62caa16b91a9..b3266f7a6915 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -22,6 +22,14 @@
 #include <asm/swiotlb.h>
 #include <asm/dma.h>
 
+bool arch_dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!ppc_md.dma_set_mask)
+		return 0;
+	return ppc_md.dma_set_mask(dev, dma_mask);
+}
+EXPORT_SYMBOL(arch_dma_set_mask);
+
 unsigned int ppc_swiotlb_enable;
 
 /*
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 59f38ca3975c..cf0ae0b3fb24 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -209,18 +209,6 @@ const struct dma_map_ops dma_nommu_ops = {
 };
 EXPORT_SYMBOL(dma_nommu_ops);
 
-int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (ppc_md.dma_set_mask)
-		return ppc_md.dma_set_mask(dev, dma_mask);
-
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-	*dev->dma_mask = dma_mask;
-	return 0;
-}
-EXPORT_SYMBOL(dma_set_mask);
-
 static int __init dma_init(void)
 {
 #ifdef CONFIG_IBMVIO
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 296ffabc9386..cb91a3d113d1 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -135,9 +135,6 @@ static inline void setup_swiotlb_ops(struct pci_controller *hose) {}
 
 static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
 {
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
 	/*
 	 * Fix up PCI devices that are able to DMA to the large inbound
 	 * mapping that allows addressing any RAM address from across PCI.
@@ -147,7 +144,6 @@ static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
 		set_dma_offset(dev, pci64_dma_offset);
 	}
 
-	*dev->dma_mask = dma_mask;
 	return 0;
 }
 
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 15bd41447025..8dd19e66c0e5 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -598,18 +598,23 @@ static inline int dma_supported(struct device *dev, u64 mask)
 	return ops->dma_supported(dev, mask);
 }
 
-#ifndef HAVE_ARCH_DMA_SET_MASK
+#ifdef CONFIG_ARCH_HAS_DMA_SET_MASK
+bool arch_dma_set_mask(struct device *dev, u64 mask);
+#else
+#define arch_dma_set_mask(dev, mask)		true
+#endif
+
 static inline int dma_set_mask(struct device *dev, u64 mask)
 {
 	if (!dev->dma_mask || !dma_supported(dev, mask))
 		return -EIO;
-
+	if (!arch_dma_set_mask(dev, mask))
+		return -EIO;
 	dma_check_mask(dev, mask);
 
 	*dev->dma_mask = mask;
 	return 0;
 }
-#endif
 
 static inline u64 dma_get_mask(struct device *dev)
 {
diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig
index 645c7a2ecde8..951045c90c2c 100644
--- a/kernel/dma/Kconfig
+++ b/kernel/dma/Kconfig
@@ -16,6 +16,9 @@ config ARCH_DMA_ADDR_T_64BIT
 config ARCH_HAS_DMA_COHERENCE_H
 	bool
 
+config ARCH_HAS_DMA_SET_MASK
+	bool
+
 config HAVE_GENERIC_DMA_COHERENT
 	bool
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 29/34] powerpc/dma: use phys_to_dma instead of get_dma_offset
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (27 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 28/34] dma-mapping, powerpc: simplify the arch dma_set_mask override Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 30/34] powerpc/dma: remove dma_nommu_mmap_coherent Christoph Hellwig
                   ` (7 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Use the standard portable helper instead of the powerpc specific one,
which is about to go away.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/dma.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index cf0ae0b3fb24..5c83a34f288f 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -6,7 +6,7 @@
  */
 
 #include <linux/device.h>
-#include <linux/dma-mapping.h>
+#include <linux/dma-direct.h>
 #include <linux/dma-debug.h>
 #include <linux/gfp.h>
 #include <linux/memblock.h>
@@ -42,7 +42,7 @@ static u64 __maybe_unused get_pfn_limit(struct device *dev)
 int dma_nommu_dma_supported(struct device *dev, u64 mask)
 {
 #ifdef CONFIG_PPC64
-	u64 limit = get_dma_offset(dev) + (memblock_end_of_DRAM() - 1);
+	u64 limit = phys_to_dma(dev, (memblock_end_of_DRAM() - 1));
 
 	/* Limit fits in the mask, we are good */
 	if (mask >= limit)
@@ -100,7 +100,7 @@ void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
 		return NULL;
 	ret = page_address(page);
 	memset(ret, 0, size);
-	*dma_handle = __pa(ret) + get_dma_offset(dev);
+	*dma_handle = phys_to_dma(dev,__pa(ret));
 
 	return ret;
 }
@@ -139,7 +139,7 @@ int dma_nommu_map_sg(struct device *dev, struct scatterlist *sgl,
 	int i;
 
 	for_each_sg(sgl, sg, nents, i) {
-		sg->dma_address = sg_phys(sg) + get_dma_offset(dev);
+		sg->dma_address = phys_to_dma(dev, sg_phys(sg));
 		sg->dma_length = sg->length;
 
 		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
@@ -170,7 +170,7 @@ dma_addr_t dma_nommu_map_page(struct device *dev, struct page *page,
 	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
 		__dma_sync_page(page, offset, size, dir);
 
-	return page_to_phys(page) + offset + get_dma_offset(dev);
+	return phys_to_dma(dev, page_to_phys(page)) + offset;
 }
 
 #ifdef CONFIG_NOT_COHERENT_CACHE
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 30/34] powerpc/dma: remove dma_nommu_mmap_coherent
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (28 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 29/34] powerpc/dma: use phys_to_dma instead of get_dma_offset Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 31/34] powerpc/dma: use generic direct and swiotlb ops Christoph Hellwig
                   ` (6 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

The coherent cache version of this function already is functionally
identicall to the default version, and by defining the
arch_dma_coherent_to_pfn hook the same is ture for the noncoherent
version as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/dma-mapping.h |  4 ----
 arch/powerpc/kernel/dma-iommu.c        |  1 -
 arch/powerpc/kernel/dma-swiotlb.c      |  1 -
 arch/powerpc/kernel/dma.c              | 19 -------------------
 arch/powerpc/mm/dma-noncoherent.c      |  7 +++++--
 arch/powerpc/platforms/Kconfig.cputype |  1 +
 arch/powerpc/platforms/pseries/vio.c   |  1 -
 7 files changed, 6 insertions(+), 28 deletions(-)

diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 16d45518d9bb..f19c486e7b3f 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -25,10 +25,6 @@ extern void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
 extern void __dma_nommu_free_coherent(struct device *dev, size_t size,
 				       void *vaddr, dma_addr_t dma_handle,
 				       unsigned long attrs);
-extern int dma_nommu_mmap_coherent(struct device *dev,
-				    struct vm_area_struct *vma,
-				    void *cpu_addr, dma_addr_t handle,
-				    size_t size, unsigned long attrs);
 int dma_nommu_map_sg(struct device *dev, struct scatterlist *sgl,
 		int nents, enum dma_data_direction direction,
 		unsigned long attrs);
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 4937b39e246b..5b15e53ee43d 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -172,7 +172,6 @@ int dma_iommu_mapping_error(struct device *dev, dma_addr_t dma_addr)
 const struct dma_map_ops dma_iommu_ops = {
 	.alloc			= dma_iommu_alloc_coherent,
 	.free			= dma_iommu_free_coherent,
-	.mmap			= dma_nommu_mmap_coherent,
 	.map_sg			= dma_iommu_map_sg,
 	.unmap_sg		= dma_iommu_unmap_sg,
 	.dma_supported		= dma_iommu_dma_supported,
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index b3266f7a6915..03df252ff5fb 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -42,7 +42,6 @@ unsigned int ppc_swiotlb_enable;
 const struct dma_map_ops powerpc_swiotlb_dma_ops = {
 	.alloc = __dma_nommu_alloc_coherent,
 	.free = __dma_nommu_free_coherent,
-	.mmap = dma_nommu_mmap_coherent,
 	.map_sg = swiotlb_map_sg_attrs,
 	.unmap_sg = swiotlb_unmap_sg_attrs,
 	.dma_supported = swiotlb_dma_supported,
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 5c83a34f288f..a6590aa77181 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -113,24 +113,6 @@ void __dma_nommu_free_coherent(struct device *dev, size_t size,
 }
 #endif /* !CONFIG_NOT_COHERENT_CACHE */
 
-int dma_nommu_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
-			     void *cpu_addr, dma_addr_t handle, size_t size,
-			     unsigned long attrs)
-{
-	unsigned long pfn;
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	pfn = __dma_get_coherent_pfn((unsigned long)cpu_addr);
-#else
-	pfn = page_to_pfn(virt_to_page(cpu_addr));
-#endif
-	return remap_pfn_range(vma, vma->vm_start,
-			       pfn + vma->vm_pgoff,
-			       vma->vm_end - vma->vm_start,
-			       vma->vm_page_prot);
-}
-
 int dma_nommu_map_sg(struct device *dev, struct scatterlist *sgl,
 		int nents, enum dma_data_direction direction,
 		unsigned long attrs)
@@ -196,7 +178,6 @@ static inline void dma_nommu_sync_single(struct device *dev,
 const struct dma_map_ops dma_nommu_ops = {
 	.alloc				= __dma_nommu_alloc_coherent,
 	.free				= __dma_nommu_free_coherent,
-	.mmap				= dma_nommu_mmap_coherent,
 	.map_sg				= dma_nommu_map_sg,
 	.dma_supported			= dma_nommu_dma_supported,
 	.map_page			= dma_nommu_map_page,
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
index e955539686a4..ee95da19c82d 100644
--- a/arch/powerpc/mm/dma-noncoherent.c
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -30,6 +30,7 @@
 #include <linux/types.h>
 #include <linux/highmem.h>
 #include <linux/dma-direct.h>
+#include <linux/dma-noncoherent.h>
 #include <linux/export.h>
 
 #include <asm/tlbflush.h>
@@ -400,14 +401,16 @@ EXPORT_SYMBOL(__dma_sync_page);
 
 /*
  * Return the PFN for a given cpu virtual address returned by
- * __dma_nommu_alloc_coherent. This is used by dma_mmap_coherent()
+ * __dma_nommu_alloc_coherent.
  */
-unsigned long __dma_get_coherent_pfn(unsigned long cpu_addr)
+long arch_dma_coherent_to_pfn(struct device *dev, void *vaddr,
+		dma_addr_t dma_addr)
 {
 	/* This should always be populated, so we don't test every
 	 * level. If that fails, we'll have a nice crash which
 	 * will be as good as a BUG_ON()
 	 */
+	unsigned long cpu_addr = (unsigned long)vaddr;
 	pgd_t *pgd = pgd_offset_k(cpu_addr);
 	pud_t *pud = pud_offset(pgd, cpu_addr);
 	pmd_t *pmd = pmd_offset(pud, cpu_addr);
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 6fedbf349fce..5fdfc1a6435c 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -414,6 +414,7 @@ config NOT_COHERENT_CACHE
 	bool
 	depends on 4xx || PPC_8xx || E200 || PPC_MPC512x || \
 		GAMECUBE_COMMON || AMIGAONE
+	select ARCH_HAS_DMA_COHERENT_TO_PFN
 	default n if PPC_47x
 	default y
 
diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
index ea3a9745c812..63dbc4cfe60d 100644
--- a/arch/powerpc/platforms/pseries/vio.c
+++ b/arch/powerpc/platforms/pseries/vio.c
@@ -603,7 +603,6 @@ static void vio_dma_iommu_unmap_sg(struct device *dev,
 static const struct dma_map_ops vio_dma_mapping_ops = {
 	.alloc             = vio_dma_iommu_alloc_coherent,
 	.free              = vio_dma_iommu_free_coherent,
-	.mmap		   = dma_nommu_mmap_coherent,
 	.map_sg            = vio_dma_iommu_map_sg,
 	.unmap_sg          = vio_dma_iommu_unmap_sg,
 	.map_page          = vio_dma_iommu_map_page,
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 31/34] powerpc/dma: use generic direct and swiotlb ops
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (29 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 30/34] powerpc/dma: remove dma_nommu_mmap_coherent Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 32/34] powerpc/dma: remove get_dma_offset Christoph Hellwig
                   ` (5 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

 - The ppc32 case of dma_nommu_dma_supported already was a no-op, and the
   64-bit case came to the same conclusion as dma_direct_supported, so
   replace it with the generic version.

 - supports CMA

 - Note that the cache maintainance in the existing code is a bit odd
   as it implements both the sync_to_device and sync_to_cpu callouts,
   but never flushes caches when unmapping.  This patch keeps both
   directions arounds, which will lead to more flushing than the previous
   implementation.  Someone more familar with the required CPUs should
   eventually take a look and optimize the cache flush handling if needed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/Kconfig                   |   1 +
 arch/powerpc/include/asm/dma-mapping.h |  41 -----
 arch/powerpc/include/asm/pgtable.h     |   1 -
 arch/powerpc/include/asm/swiotlb.h     |   2 -
 arch/powerpc/kernel/Makefile           |   2 +-
 arch/powerpc/kernel/dma-iommu.c        |  13 +-
 arch/powerpc/kernel/dma-swiotlb.c      |  24 +--
 arch/powerpc/kernel/dma.c              | 202 -------------------------
 arch/powerpc/kernel/pci-common.c       |   2 +-
 arch/powerpc/kernel/setup-common.c     |   2 +-
 arch/powerpc/mm/dma-noncoherent.c      |  35 +++--
 arch/powerpc/mm/mem.c                  |  22 ---
 arch/powerpc/platforms/44x/warp.c      |   2 +-
 arch/powerpc/platforms/Kconfig.cputype |   2 +
 arch/powerpc/platforms/cell/iommu.c    |   4 +-
 arch/powerpc/platforms/pasemi/iommu.c  |   2 +-
 arch/powerpc/platforms/pasemi/setup.c  |   2 +-
 arch/powerpc/platforms/pseries/vio.c   |   7 +
 arch/powerpc/sysdev/fsl_pci.c          |   2 +-
 drivers/misc/cxl/vphb.c                |   2 +-
 20 files changed, 50 insertions(+), 320 deletions(-)
 delete mode 100644 arch/powerpc/kernel/dma.c

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4f03997ad54a..e200cdf92290 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -155,6 +155,7 @@ config PPC
 	select CLONE_BACKWARDS
 	select DCACHE_WORD_ACCESS		if PPC64 && CPU_LITTLE_ENDIAN
 	select DYNAMIC_FTRACE			if FUNCTION_TRACER
+	select DMA_DIRECT_OPS
 	select EDAC_ATOMIC_SCRUB
 	select EDAC_SUPPORT
 	select GENERIC_ATOMIC64			if PPC32
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index f19c486e7b3f..93e57e28be28 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -18,46 +18,6 @@
 #include <asm/io.h>
 #include <asm/swiotlb.h>
 
-/* Some dma direct funcs must be visible for use in other dma_ops */
-extern void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
-					 dma_addr_t *dma_handle, gfp_t flag,
-					 unsigned long attrs);
-extern void __dma_nommu_free_coherent(struct device *dev, size_t size,
-				       void *vaddr, dma_addr_t dma_handle,
-				       unsigned long attrs);
-int dma_nommu_map_sg(struct device *dev, struct scatterlist *sgl,
-		int nents, enum dma_data_direction direction,
-		unsigned long attrs);
-dma_addr_t dma_nommu_map_page(struct device *dev, struct page *page,
-		unsigned long offset, size_t size,
-		enum dma_data_direction dir, unsigned long attrs);
-int dma_nommu_dma_supported(struct device *dev, u64 mask);
-u64 dma_nommu_get_required_mask(struct device *dev);
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/*
- * DMA-consistent mapping functions for PowerPCs that don't support
- * cache snooping.  These allocate/free a region of uncached mapped
- * memory space for use with DMA devices.  Alternatively, you could
- * allocate the space "normally" and use the cache management functions
- * to ensure it is consistent.
- */
-struct device;
-extern void __dma_sync(void *vaddr, size_t size, int direction);
-extern void __dma_sync_page(struct page *page, unsigned long offset,
-				 size_t size, int direction);
-extern unsigned long __dma_get_coherent_pfn(unsigned long cpu_addr);
-
-#else /* ! CONFIG_NOT_COHERENT_CACHE */
-/*
- * Cache coherent cores.
- */
-
-#define __dma_sync(addr, size, rw)		((void)0)
-#define __dma_sync_page(pg, off, sz, rw)	((void)0)
-
-#endif /* ! CONFIG_NOT_COHERENT_CACHE */
-
 static inline unsigned long device_to_mask(struct device *dev)
 {
 	if (dev->dma_mask && *dev->dma_mask)
@@ -72,7 +32,6 @@ static inline unsigned long device_to_mask(struct device *dev)
 #ifdef CONFIG_PPC64
 extern const struct dma_map_ops dma_iommu_ops;
 #endif
-extern const struct dma_map_ops dma_nommu_ops;
 
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 {
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 8af32ce93c7f..70979b860761 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -66,7 +66,6 @@ extern unsigned long empty_zero_page[];
 
 extern pgd_t swapper_pg_dir[];
 
-int dma_pfn_limit_to_zone(u64 pfn_limit);
 extern void paging_init(void);
 
 /*
diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
index 26a0f12b835b..b7ff218109b3 100644
--- a/arch/powerpc/include/asm/swiotlb.h
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -13,8 +13,6 @@
 
 #include <linux/swiotlb.h>
 
-extern const struct dma_map_ops powerpc_swiotlb_dma_ops;
-
 extern unsigned int ppc_swiotlb_enable;
 int __init swiotlb_setup_bus_notifier(void);
 
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 53d4b8d5b54d..d9e01cc3ae84 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -36,7 +36,7 @@ obj-y				:= cputable.o ptrace.o syscalls.o \
 				   process.o systbl.o idle.o \
 				   signal.o sysfs.o cacheinfo.o time.o \
 				   prom.o traps.o setup-common.o \
-				   udbg.o misc.o io.o dma.o misc_$(BITS).o \
+				   udbg.o misc.o io.o misc_$(BITS).o \
 				   of_platform.o prom_parse.o
 obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   signal_64.o ptrace32.o \
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 5b15e53ee43d..0224925c5628 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -21,7 +21,7 @@
 static inline bool dma_iommu_alloc_bypass(struct device *dev)
 {
 	return dev->archdata.iommu_bypass && !iommu_fixed_is_weak &&
-		dma_nommu_dma_supported(dev, dev->coherent_dma_mask);
+		dma_direct_supported(dev, dev->coherent_dma_mask);
 }
 
 static inline bool dma_iommu_map_bypass(struct device *dev,
@@ -40,8 +40,7 @@ static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
 				      unsigned long attrs)
 {
 	if (dma_iommu_alloc_bypass(dev))
-		return __dma_nommu_alloc_coherent(dev, size, dma_handle, flag,
-				attrs);
+		return dma_direct_alloc(dev, size, dma_handle, flag, attrs);
 	return iommu_alloc_coherent(dev, get_iommu_table_base(dev), size,
 				    dma_handle, dev->coherent_dma_mask, flag,
 				    dev_to_node(dev));
@@ -52,7 +51,7 @@ static void dma_iommu_free_coherent(struct device *dev, size_t size,
 				    unsigned long attrs)
 {
 	if (dma_iommu_alloc_bypass(dev))
-		__dma_nommu_free_coherent(dev, size, vaddr, dma_handle, attrs);
+		dma_direct_free(dev, size, vaddr, dma_handle, attrs);
 	else
 		iommu_free_coherent(get_iommu_table_base(dev), size, vaddr,
 				dma_handle);
@@ -69,7 +68,7 @@ static dma_addr_t dma_iommu_map_page(struct device *dev, struct page *page,
 				     unsigned long attrs)
 {
 	if (dma_iommu_map_bypass(dev, attrs))
-		return dma_nommu_map_page(dev, page, offset, size, direction,
+		return dma_direct_map_page(dev, page, offset, size, direction,
 				attrs);
 	return iommu_map_page(dev, get_iommu_table_base(dev), page, offset,
 			      size, device_to_mask(dev), direction, attrs);
@@ -91,7 +90,7 @@ static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
 			    unsigned long attrs)
 {
 	if (dma_iommu_map_bypass(dev, attrs))
-		return dma_nommu_map_sg(dev, sglist, nelems, direction, attrs);
+		return dma_direct_map_sg(dev, sglist, nelems, direction, attrs);
 	return ppc_iommu_map_sg(dev, get_iommu_table_base(dev), sglist, nelems,
 				device_to_mask(dev), direction, attrs);
 }
@@ -152,7 +151,7 @@ u64 dma_iommu_get_required_mask(struct device *dev)
 		return 0;
 
 	if (dev_is_pci(dev)) {
-		u64 bypass_mask = dma_nommu_get_required_mask(dev);
+		u64 bypass_mask = dma_direct_get_required_mask(dev);
 
 		if (dma_iommu_bypass_supported(dev, bypass_mask))
 			return bypass_mask;
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 03df252ff5fb..bded4127791a 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -32,28 +32,6 @@ EXPORT_SYMBOL(arch_dma_set_mask);
 
 unsigned int ppc_swiotlb_enable;
 
-/*
- * At the moment, all platforms that use this code only require
- * swiotlb to be used if we're operating on HIGHMEM.  Since
- * we don't ever call anything other than map_sg, unmap_sg,
- * map_page, and unmap_page on highmem, use normal dma_ops
- * for everything else.
- */
-const struct dma_map_ops powerpc_swiotlb_dma_ops = {
-	.alloc = __dma_nommu_alloc_coherent,
-	.free = __dma_nommu_free_coherent,
-	.map_sg = swiotlb_map_sg_attrs,
-	.unmap_sg = swiotlb_unmap_sg_attrs,
-	.dma_supported = swiotlb_dma_supported,
-	.map_page = swiotlb_map_page,
-	.unmap_page = swiotlb_unmap_page,
-	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
-	.sync_single_for_device = swiotlb_sync_single_for_device,
-	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-	.sync_sg_for_device = swiotlb_sync_sg_for_device,
-	.mapping_error = dma_direct_mapping_error,
-};
-
 static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
 				  unsigned long action, void *data)
 {
@@ -65,7 +43,7 @@ static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
 
 	/* May need to bounce if the device can't address all of DRAM */
 	if ((dma_get_mask(dev) + 1) < memblock_end_of_DRAM())
-		set_dma_ops(dev, &powerpc_swiotlb_dma_ops);
+		set_dma_ops(dev, &swiotlb_dma_ops);
 
 	return NOTIFY_DONE;
 }
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
deleted file mode 100644
index a6590aa77181..000000000000
--- a/arch/powerpc/kernel/dma.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation
- *
- * Provide default implementations of the DMA mapping callbacks for
- * directly mapped busses.
- */
-
-#include <linux/device.h>
-#include <linux/dma-direct.h>
-#include <linux/dma-debug.h>
-#include <linux/gfp.h>
-#include <linux/memblock.h>
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <asm/vio.h>
-#include <asm/bug.h>
-#include <asm/machdep.h>
-#include <asm/swiotlb.h>
-#include <asm/iommu.h>
-
-/*
- * Generic direct DMA implementation
- *
- * This implementation supports a per-device offset that can be applied if
- * the address at which memory is visible to devices is not 0. Platform code
- * can set archdata.dma_data to an unsigned long holding the offset. By
- * default the offset is PCI_DRAM_OFFSET.
- */
-
-static u64 __maybe_unused get_pfn_limit(struct device *dev)
-{
-	u64 pfn = (dev->coherent_dma_mask >> PAGE_SHIFT) + 1;
-
-#ifdef CONFIG_SWIOTLB
-	if (dev->bus_dma_mask && dev->dma_ops == &powerpc_swiotlb_dma_ops)
-		pfn = min_t(u64, pfn, dev->bus_dma_mask >> PAGE_SHIFT);
-#endif
-
-	return pfn;
-}
-
-int dma_nommu_dma_supported(struct device *dev, u64 mask)
-{
-#ifdef CONFIG_PPC64
-	u64 limit = phys_to_dma(dev, (memblock_end_of_DRAM() - 1));
-
-	/* Limit fits in the mask, we are good */
-	if (mask >= limit)
-		return 1;
-
-#ifdef CONFIG_FSL_SOC
-	/* Freescale gets another chance via ZONE_DMA, however
-	 * that will have to be refined if/when they support iommus
-	 */
-	return 1;
-#endif
-	/* Sorry ... */
-	return 0;
-#else
-	return 1;
-#endif
-}
-
-#ifndef CONFIG_NOT_COHERENT_CACHE
-void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
-				  dma_addr_t *dma_handle, gfp_t flag,
-				  unsigned long attrs)
-{
-	void *ret;
-	struct page *page;
-	int node = dev_to_node(dev);
-#ifdef CONFIG_FSL_SOC
-	u64 pfn = get_pfn_limit(dev);
-	int zone;
-
-	/*
-	 * This code should be OK on other platforms, but we have drivers that
-	 * don't set coherent_dma_mask. As a workaround we just ifdef it. This
-	 * whole routine needs some serious cleanup.
-	 */
-
-	zone = dma_pfn_limit_to_zone(pfn);
-	if (zone < 0) {
-		dev_err(dev, "%s: No suitable zone for pfn %#llx\n",
-			__func__, pfn);
-		return NULL;
-	}
-
-	switch (zone) {
-#ifdef CONFIG_ZONE_DMA
-	case ZONE_DMA:
-		flag |= GFP_DMA;
-		break;
-#endif
-	};
-#endif /* CONFIG_FSL_SOC */
-
-	page = alloc_pages_node(node, flag, get_order(size));
-	if (page == NULL)
-		return NULL;
-	ret = page_address(page);
-	memset(ret, 0, size);
-	*dma_handle = phys_to_dma(dev,__pa(ret));
-
-	return ret;
-}
-
-void __dma_nommu_free_coherent(struct device *dev, size_t size,
-				void *vaddr, dma_addr_t dma_handle,
-				unsigned long attrs)
-{
-	free_pages((unsigned long)vaddr, get_order(size));
-}
-#endif /* !CONFIG_NOT_COHERENT_CACHE */
-
-int dma_nommu_map_sg(struct device *dev, struct scatterlist *sgl,
-		int nents, enum dma_data_direction direction,
-		unsigned long attrs)
-{
-	struct scatterlist *sg;
-	int i;
-
-	for_each_sg(sgl, sg, nents, i) {
-		sg->dma_address = phys_to_dma(dev, sg_phys(sg));
-		sg->dma_length = sg->length;
-
-		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
-			continue;
-
-		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
-	}
-
-	return nents;
-}
-
-u64 dma_nommu_get_required_mask(struct device *dev)
-{
-	u64 end, mask;
-
-	end = memblock_end_of_DRAM() + get_dma_offset(dev);
-
-	mask = 1ULL << (fls64(end) - 1);
-	mask += mask - 1;
-
-	return mask;
-}
-
-dma_addr_t dma_nommu_map_page(struct device *dev, struct page *page,
-		unsigned long offset, size_t size,
-		enum dma_data_direction dir, unsigned long attrs)
-{
-	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		__dma_sync_page(page, offset, size, dir);
-
-	return phys_to_dma(dev, page_to_phys(page)) + offset;
-}
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-static inline void dma_nommu_sync_sg(struct device *dev,
-		struct scatterlist *sgl, int nents,
-		enum dma_data_direction direction)
-{
-	struct scatterlist *sg;
-	int i;
-
-	for_each_sg(sgl, sg, nents, i)
-		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
-}
-
-static inline void dma_nommu_sync_single(struct device *dev,
-					  dma_addr_t dma_handle, size_t size,
-					  enum dma_data_direction direction)
-{
-	__dma_sync(bus_to_virt(dma_handle), size, direction);
-}
-#endif
-
-const struct dma_map_ops dma_nommu_ops = {
-	.alloc				= __dma_nommu_alloc_coherent,
-	.free				= __dma_nommu_free_coherent,
-	.map_sg				= dma_nommu_map_sg,
-	.dma_supported			= dma_nommu_dma_supported,
-	.map_page			= dma_nommu_map_page,
-#ifdef CONFIG_NOT_COHERENT_CACHE
-	.sync_single_for_cpu 		= dma_nommu_sync_single,
-	.sync_single_for_device 	= dma_nommu_sync_single,
-	.sync_sg_for_cpu 		= dma_nommu_sync_sg,
-	.sync_sg_for_device 		= dma_nommu_sync_sg,
-#endif
-};
-EXPORT_SYMBOL(dma_nommu_ops);
-
-static int __init dma_init(void)
-{
-#ifdef CONFIG_IBMVIO
-	dma_debug_add_bus(&vio_bus_type);
-#endif
-
-       return 0;
-}
-fs_initcall(dma_init);
-
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index a84707680525..661b937f31ed 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -62,7 +62,7 @@ resource_size_t isa_mem_base;
 EXPORT_SYMBOL(isa_mem_base);
 
 
-static const struct dma_map_ops *pci_dma_ops = &dma_nommu_ops;
+static const struct dma_map_ops *pci_dma_ops = &dma_direct_ops;
 
 void set_pci_dma_ops(const struct dma_map_ops *dma_ops)
 {
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 93ee3703b42f..104228c0e980 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -791,7 +791,7 @@ void arch_setup_pdev_archdata(struct platform_device *pdev)
 {
 	pdev->archdata.dma_mask = DMA_BIT_MASK(32);
 	pdev->dev.dma_mask = &pdev->archdata.dma_mask;
- 	set_dma_ops(&pdev->dev, &dma_nommu_ops);
+	set_dma_ops(&pdev->dev, &dma_direct_ops);
 }
 
 static __init void print_system_info(void)
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
index ee95da19c82d..b5d2658c26af 100644
--- a/arch/powerpc/mm/dma-noncoherent.c
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -152,8 +152,8 @@ static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsi
  * Allocate DMA-coherent memory space and return both the kernel remapped
  * virtual and bus address for that space.
  */
-void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
-		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
+void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		gfp_t gfp, unsigned long attrs)
 {
 	struct page *page;
 	struct ppc_vm_region *c;
@@ -254,7 +254,7 @@ void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
 /*
  * free a page as defined by the above mapping.
  */
-void __dma_nommu_free_coherent(struct device *dev, size_t size, void *vaddr,
+void arch_dma_free(struct device *dev, size_t size, void *vaddr,
 		dma_addr_t dma_handle, unsigned long attrs)
 {
 	struct ppc_vm_region *c;
@@ -314,7 +314,7 @@ void __dma_nommu_free_coherent(struct device *dev, size_t size, void *vaddr,
 /*
  * make an area consistent.
  */
-void __dma_sync(void *vaddr, size_t size, int direction)
+static void __dma_sync(void *vaddr, size_t size, int direction)
 {
 	unsigned long start = (unsigned long)vaddr;
 	unsigned long end   = start + size;
@@ -340,7 +340,6 @@ void __dma_sync(void *vaddr, size_t size, int direction)
 		break;
 	}
 }
-EXPORT_SYMBOL(__dma_sync);
 
 #ifdef CONFIG_HIGHMEM
 /*
@@ -387,21 +386,33 @@ static inline void __dma_sync_page_highmem(struct page *page,
  * __dma_sync_page makes memory consistent. identical to __dma_sync, but
  * takes a struct page instead of a virtual address
  */
-void __dma_sync_page(struct page *page, unsigned long offset,
-	size_t size, int direction)
+static void __dma_sync_page(phys_addr_t paddr, size_t size, int dir)
 {
+	struct page *page = pfn_to_page(paddr >> PAGE_SHIFT);
+	unsigned offset = paddr & ~PAGE_MASK;
+
 #ifdef CONFIG_HIGHMEM
-	__dma_sync_page_highmem(page, offset, size, direction);
+	__dma_sync_page_highmem(page, offset, size, dir);
 #else
 	unsigned long start = (unsigned long)page_address(page) + offset;
-	__dma_sync((void *)start, size, direction);
+	__dma_sync((void *)start, size, dir);
 #endif
 }
-EXPORT_SYMBOL(__dma_sync_page);
+
+void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
+		size_t size, enum dma_data_direction dir)
+{
+	__dma_sync_page(paddr, size, dir);
+}
+
+void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
+		size_t size, enum dma_data_direction dir)
+{
+	__dma_sync_page(paddr, size, dir);
+}
 
 /*
- * Return the PFN for a given cpu virtual address returned by
- * __dma_nommu_alloc_coherent.
+ * Return the PFN for a given cpu virtual address returned by arch_dma_alloc.
  */
 long arch_dma_coherent_to_pfn(struct device *dev, void *vaddr,
 		dma_addr_t dma_addr)
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index c0b676c3a5ba..9a00f470434c 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -69,15 +69,12 @@ pte_t *kmap_pte;
 EXPORT_SYMBOL(kmap_pte);
 pgprot_t kmap_prot;
 EXPORT_SYMBOL(kmap_prot);
-#define TOP_ZONE ZONE_HIGHMEM
 
 static inline pte_t *virt_to_kpte(unsigned long vaddr)
 {
 	return pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr),
 			vaddr), vaddr), vaddr);
 }
-#else
-#define TOP_ZONE ZONE_NORMAL
 #endif
 
 int page_is_ram(unsigned long pfn)
@@ -260,25 +257,6 @@ static int __init mark_nonram_nosave(void)
  */
 static unsigned long max_zone_pfns[MAX_NR_ZONES];
 
-/*
- * Find the least restrictive zone that is entirely below the
- * specified pfn limit.  Returns < 0 if no suitable zone is found.
- *
- * pfn_limit must be u64 because it can exceed 32 bits even on 32-bit
- * systems -- the DMA limit can be higher than any possible real pfn.
- */
-int dma_pfn_limit_to_zone(u64 pfn_limit)
-{
-	int i;
-
-	for (i = TOP_ZONE; i >= 0; i--) {
-		if (max_zone_pfns[i] <= pfn_limit)
-			return i;
-	}
-
-	return -EPERM;
-}
-
 /*
  * paging_init() sets up the page tables - in fact we've already done this.
  */
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 7e4f8ca19ce8..c0e6fb270d59 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -47,7 +47,7 @@ static int __init warp_probe(void)
 	if (!of_machine_is_compatible("pika,warp"))
 		return 0;
 
-	/* For __dma_nommu_alloc_coherent */
+	/* For arch_dma_alloc */
 	ISA_DMA_THRESHOLD = ~0L;
 
 	return 1;
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 5fdfc1a6435c..d0ececddd62b 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -415,6 +415,8 @@ config NOT_COHERENT_CACHE
 	depends on 4xx || PPC_8xx || E200 || PPC_MPC512x || \
 		GAMECUBE_COMMON || AMIGAONE
 	select ARCH_HAS_DMA_COHERENT_TO_PFN
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	default n if PPC_47x
 	default y
 
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 93c7e4aef571..75fd2ee57e26 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -601,7 +601,7 @@ static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action,
 	if (cell_iommu_enabled)
 		dev->dma_ops = &dma_iommu_ops;
 	else
-		dev->dma_ops = &dma_nommu_ops;
+		dev->dma_ops = &dma_direct_ops;
 	cell_dma_dev_setup(dev);
 	return 0;
 }
@@ -727,7 +727,7 @@ static int __init cell_iommu_init_disabled(void)
 	unsigned long base = 0, size;
 
 	/* When no iommu is present, we use direct DMA ops */
-	set_pci_dma_ops(&dma_nommu_ops);
+	set_pci_dma_ops(&dma_direct_ops);
 
 	/* First make sure all IOC translation is turned off */
 	cell_disable_iommus();
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index f2971522fb4a..4466ac61bce6 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -186,7 +186,7 @@ static void pci_dma_dev_setup_pasemi(struct pci_dev *dev)
 	 */
 	if (dev->vendor == 0x1959 && dev->device == 0xa007 &&
 	    !firmware_has_feature(FW_FEATURE_LPAR)) {
-		dev->dev.dma_ops = &dma_nommu_ops;
+		dev->dev.dma_ops = &dma_direct_ops;
 		/*
 		 * Set the coherent DMA mask to prevent the iommu
 		 * being used unnecessarily
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 9a6eb04cca83..afb44e3dd8d2 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -362,7 +362,7 @@ static int pcmcia_notify(struct notifier_block *nb, unsigned long action,
 		return 0;
 
 	/* We use the direct ops for localbus */
-	dev->dma_ops = &dma_nommu_ops;
+	dev->dma_ops = &dma_direct_ops;
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
index 63dbc4cfe60d..eabb5620d354 100644
--- a/arch/powerpc/platforms/pseries/vio.c
+++ b/arch/powerpc/platforms/pseries/vio.c
@@ -1703,3 +1703,10 @@ int vio_disable_interrupts(struct vio_dev *dev)
 }
 EXPORT_SYMBOL(vio_disable_interrupts);
 #endif /* CONFIG_PPC_PSERIES */
+
+static int __init vio_init(void)
+{
+	dma_debug_add_bus(&vio_bus_type);
+	return 0;
+}
+fs_initcall(vio_init);
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index cb91a3d113d1..081ed84c3f4c 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -126,7 +126,7 @@ static void setup_swiotlb_ops(struct pci_controller *hose)
 {
 	if (ppc_swiotlb_enable) {
 		hose->controller_ops.dma_dev_setup = pci_dma_dev_setup_swiotlb;
-		set_pci_dma_ops(&powerpc_swiotlb_dma_ops);
+		set_pci_dma_ops(&swiotlb_dma_ops);
 	}
 }
 #else
diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c
index 49da2f744bbf..f4c0e9d2affe 100644
--- a/drivers/misc/cxl/vphb.c
+++ b/drivers/misc/cxl/vphb.c
@@ -43,7 +43,7 @@ static bool cxl_pci_enable_device_hook(struct pci_dev *dev)
 		return false;
 	}
 
-	set_dma_ops(&dev->dev, &dma_nommu_ops);
+	set_dma_ops(&dev->dev, &dma_direct_ops);
 	set_dma_offset(&dev->dev, PAGE_OFFSET);
 
 	/*
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 32/34] powerpc/dma: remove get_dma_offset
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (30 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 31/34] powerpc/dma: use generic direct and swiotlb ops Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 33/34] powerpc/dma: remove set_dma_offset Christoph Hellwig
                   ` (4 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Just fold the calculation into __phys_to_dma/__dma_to_phys as those are
the only places that should know about it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/dma-direct.h  |  8 ++++++--
 arch/powerpc/include/asm/dma-mapping.h | 16 ----------------
 2 files changed, 6 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/include/asm/dma-direct.h b/arch/powerpc/include/asm/dma-direct.h
index 92d8aed86422..a2912b47102c 100644
--- a/arch/powerpc/include/asm/dma-direct.h
+++ b/arch/powerpc/include/asm/dma-direct.h
@@ -13,11 +13,15 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 
 static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
-	return paddr + get_dma_offset(dev);
+	if (!dev)
+		return paddr + PCI_DRAM_OFFSET;
+	return paddr + dev->archdata.dma_offset;
 }
 
 static inline phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
-	return daddr - get_dma_offset(dev);
+	if (!dev)
+		return daddr - PCI_DRAM_OFFSET;
+	return daddr - dev->archdata.dma_offset;
 }
 #endif /* ASM_POWERPC_DMA_DIRECT_H */
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 93e57e28be28..c70f55d2f5e0 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -43,22 +43,6 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 	return NULL;
 }
 
-/*
- * get_dma_offset()
- *
- * Get the dma offset on configurations where the dma address can be determined
- * from the physical address by looking at a simple offset.  Direct dma and
- * swiotlb use this function, but it is typically not used by implementations
- * with an iommu.
- */
-static inline dma_addr_t get_dma_offset(struct device *dev)
-{
-	if (dev)
-		return dev->archdata.dma_offset;
-
-	return PCI_DRAM_OFFSET;
-}
-
 static inline void set_dma_offset(struct device *dev, dma_addr_t off)
 {
 	if (dev)
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 33/34] powerpc/dma: remove set_dma_offset
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (31 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 32/34] powerpc/dma: remove get_dma_offset Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-14  8:23 ` [PATCH 34/34] powerpc/dma: trim the fat from <asm/dma-mapping.h> Christoph Hellwig
                   ` (3 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

There is no good reason for this helper, just opencode it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/dma-mapping.h    | 6 ------
 arch/powerpc/kernel/pci-common.c          | 2 +-
 arch/powerpc/platforms/cell/iommu.c       | 4 ++--
 arch/powerpc/platforms/powernv/pci-ioda.c | 6 +++---
 arch/powerpc/platforms/pseries/iommu.c    | 7 ++-----
 arch/powerpc/sysdev/dart_iommu.c          | 2 +-
 arch/powerpc/sysdev/fsl_pci.c             | 2 +-
 drivers/misc/cxl/vphb.c                   | 2 +-
 8 files changed, 11 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index c70f55d2f5e0..a59c42879194 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -43,11 +43,5 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 	return NULL;
 }
 
-static inline void set_dma_offset(struct device *dev, dma_addr_t off)
-{
-	if (dev)
-		dev->archdata.dma_offset = off;
-}
-
 #endif /* __KERNEL__ */
 #endif	/* _ASM_DMA_MAPPING_H */
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 661b937f31ed..b645b3882815 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -966,7 +966,7 @@ static void pcibios_setup_device(struct pci_dev *dev)
 
 	/* Hook up default DMA ops */
 	set_dma_ops(&dev->dev, pci_dma_ops);
-	set_dma_offset(&dev->dev, PCI_DRAM_OFFSET);
+	dev->dev.archdata.dma_offset = PCI_DRAM_OFFSET;
 
 	/* Additional platform DMA/iommu setup */
 	phb = pci_bus_to_host(dev->bus);
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 75fd2ee57e26..348a815779c1 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -577,10 +577,10 @@ static void cell_dma_dev_setup(struct device *dev)
 		u64 addr = cell_iommu_get_fixed_address(dev);
 
 		if (addr != OF_BAD_ADDR)
-			set_dma_offset(dev, addr + dma_iommu_fixed_base);
+			dev->archdata.dma_offset = addr + dma_iommu_fixed_base;
 		set_iommu_table_base(dev, cell_get_iommu_table(dev));
 	} else {
-		set_dma_offset(dev, cell_dma_nommu_offset);
+		dev->archdata.dma_offset = cell_dma_nommu_offset;
 	}
 }
 
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 23fd46cd2ab3..e516d99bb2ed 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1735,7 +1735,7 @@ static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev
 
 	pe = &phb->ioda.pe_array[pdn->pe_number];
 	WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops);
-	set_dma_offset(&pdev->dev, pe->tce_bypass_base);
+	pdev->dev.archdata.dma_offset = pe->tce_bypass_base;
 	set_iommu_table_base(&pdev->dev, pe->table_group.tables[0]);
 	/*
 	 * Note: iommu_add_device() will fail here as
@@ -1848,7 +1848,7 @@ static bool pnv_pci_ioda_iommu_bypass_supported(struct pci_dev *pdev,
 		if (rc)
 			return rc;
 		/* 4GB offset bypasses 32-bit space */
-		set_dma_offset(&pdev->dev, (1ULL << 32));
+		pdev->dev.archdata.dma_offset = (1ULL << 32);
 		return true;
 	}
 
@@ -1863,7 +1863,7 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe,
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		set_iommu_table_base(&dev->dev, pe->table_group.tables[0]);
-		set_dma_offset(&dev->dev, pe->tce_bypass_base);
+		dev->dev.archdata.dma_offset = pe->tce_bypass_base;
 		if (add_to_group)
 			iommu_add_device(&dev->dev);
 
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 8965d174c53b..a2ff20d154fe 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -1197,7 +1197,6 @@ static bool iommu_bypass_supported_pSeriesLP(struct pci_dev *pdev, u64 dma_mask)
 {
 	struct device_node *dn = pci_device_to_OF_node(pdev), *pdn;
 	const __be32 *dma_window = NULL;
-	u64 dma_offset;
 
 	/* only attempt to use a new window if 64-bit DMA is requested */
 	if (dma_mask < DMA_BIT_MASK(64))
@@ -1219,11 +1218,9 @@ static bool iommu_bypass_supported_pSeriesLP(struct pci_dev *pdev, u64 dma_mask)
 	}
 
 	if (pdn && PCI_DN(pdn)) {
-		dma_offset = enable_ddw(pdev, pdn);
-		if (dma_offset != 0) {
-			set_dma_offset(&pdev->dev, dma_offset);
+		pdev->dev.archdata.dma_offset = enable_ddw(pdev, pdn);
+		if (pdev->dev.archdata.dma_offset)
 			return true;
-		}
 	}
 
 	return false;
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 2681a19347ba..2e24fc87ed84 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -386,7 +386,7 @@ static bool dart_device_on_pcie(struct device *dev)
 static void pci_dma_dev_setup_dart(struct pci_dev *dev)
 {
 	if (dart_is_u4 && dart_device_on_pcie(&dev->dev))
-		set_dma_offset(&dev->dev, DART_U4_BYPASS_BASE);
+		dev->dev.archdata.dma_offset = DART_U4_BYPASS_BASE;
 	set_iommu_table_base(&dev->dev, &iommu_table_dart);
 }
 
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 081ed84c3f4c..964a4aede6b1 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -141,7 +141,7 @@ static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
 	 */
 	if (dev_is_pci(dev) && dma_mask >= pci64_dma_offset * 2 - 1) {
 		dev->bus_dma_mask = 0;
-		set_dma_offset(dev, pci64_dma_offset);
+		dev->archdata.dma_offset = pci64_dma_offset;
 	}
 
 	return 0;
diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c
index f4c0e9d2affe..f4ca1a4ada66 100644
--- a/drivers/misc/cxl/vphb.c
+++ b/drivers/misc/cxl/vphb.c
@@ -44,7 +44,7 @@ static bool cxl_pci_enable_device_hook(struct pci_dev *dev)
 	}
 
 	set_dma_ops(&dev->dev, &dma_direct_ops);
-	set_dma_offset(&dev->dev, PAGE_OFFSET);
+	dev->dev.archdata.dma_offset = PAGE_OFFSET;
 
 	/*
 	 * Allocate a context to do cxl things too.  If we eventually do real
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* [PATCH 34/34] powerpc/dma: trim the fat from <asm/dma-mapping.h>
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (32 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 33/34] powerpc/dma: remove set_dma_offset Christoph Hellwig
@ 2018-11-14  8:23 ` Christoph Hellwig
  2018-11-27  7:42 ` use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (2 subsequent siblings)
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-14  8:23 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

There is no need to provide anything but get_arch_dma_ops to
<linux/dma-mapping.h>.  More the remaining declarations to <asm/iommu.h>
and drop all the includes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/dma-mapping.h        | 29 -------------------
 arch/powerpc/include/asm/iommu.h              | 10 +++++++
 arch/powerpc/platforms/44x/ppc476.c           |  1 +
 arch/powerpc/platforms/85xx/corenet_generic.c |  1 +
 arch/powerpc/platforms/85xx/qemu_e500.c       |  1 +
 arch/powerpc/sysdev/fsl_pci.c                 |  1 +
 6 files changed, 14 insertions(+), 29 deletions(-)

diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index a59c42879194..565d6f74b189 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -1,37 +1,9 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2004 IBM
- *
- * Implements the generic device dma API for powerpc.
- * the pci and vio busses
  */
 #ifndef _ASM_DMA_MAPPING_H
 #define _ASM_DMA_MAPPING_H
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/cache.h>
-/* need struct page definitions */
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-debug.h>
-#include <asm/io.h>
-#include <asm/swiotlb.h>
-
-static inline unsigned long device_to_mask(struct device *dev)
-{
-	if (dev->dma_mask && *dev->dma_mask)
-		return *dev->dma_mask;
-	/* Assume devices without mask can take 32 bit addresses */
-	return 0xfffffffful;
-}
-
-/*
- * Available generic sets of operations
- */
-#ifdef CONFIG_PPC64
-extern const struct dma_map_ops dma_iommu_ops;
-#endif
 
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 {
@@ -43,5 +15,4 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 	return NULL;
 }
 
-#endif /* __KERNEL__ */
 #endif	/* _ASM_DMA_MAPPING_H */
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 5128aac8e165..46a8d4716d90 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -332,5 +332,15 @@ extern bool iommu_fixed_is_weak;
 #define iommu_fixed_is_weak false
 #endif
 
+extern const struct dma_map_ops dma_iommu_ops;
+
+static inline unsigned long device_to_mask(struct device *dev)
+{
+	if (dev->dma_mask && *dev->dma_mask)
+		return *dev->dma_mask;
+	/* Assume devices without mask can take 32 bit addresses */
+	return 0xfffffffful;
+}
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_IOMMU_H */
diff --git a/arch/powerpc/platforms/44x/ppc476.c b/arch/powerpc/platforms/44x/ppc476.c
index e55933f9cd55..a5e61e5c16e2 100644
--- a/arch/powerpc/platforms/44x/ppc476.c
+++ b/arch/powerpc/platforms/44x/ppc476.c
@@ -34,6 +34,7 @@
 #include <asm/ppc4xx.h>
 #include <asm/mpic.h>
 #include <asm/mmu.h>
+#include <asm/swiotlb.h>
 
 #include <linux/pci.h>
 #include <linux/i2c.h>
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index b0dac307bebf..0ea13697189e 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -27,6 +27,7 @@
 #include <asm/udbg.h>
 #include <asm/mpic.h>
 #include <asm/ehv_pic.h>
+#include <asm/swiotlb.h>
 #include <soc/fsl/qe/qe_ic.h>
 
 #include <linux/of_platform.h>
diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c
index 27631c607f3d..c52c8f9e8385 100644
--- a/arch/powerpc/platforms/85xx/qemu_e500.c
+++ b/arch/powerpc/platforms/85xx/qemu_e500.c
@@ -22,6 +22,7 @@
 #include <asm/time.h>
 #include <asm/udbg.h>
 #include <asm/mpic.h>
+#include <asm/swiotlb.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include "smp.h"
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 964a4aede6b1..9584765dbe3b 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -40,6 +40,7 @@
 #include <asm/mpc85xx.h>
 #include <asm/disassemble.h>
 #include <asm/ppc-opcode.h>
+#include <asm/swiotlb.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (33 preceding siblings ...)
  2018-11-14  8:23 ` [PATCH 34/34] powerpc/dma: trim the fat from <asm/dma-mapping.h> Christoph Hellwig
@ 2018-11-27  7:42 ` Christoph Hellwig
  2018-11-27 22:05   ` Benjamin Herrenschmidt
                     ` (2 more replies)
  2018-12-08 17:03 ` Christoph Hellwig
  2018-12-16 16:51 ` Christoph Hellwig
  36 siblings, 3 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-27  7:42 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

Any comments?  I'd like to at least get the ball moving on the easy
bits.

On Wed, Nov 14, 2018 at 09:22:40AM +0100, Christoph Hellwig wrote:
> Hi all,
> 
> this series switches the powerpc port to use the generic swiotlb and
> noncoherent dma ops, and to use more generic code for the coherent
> direct mapping, as well as removing a lot of dead code.
> 
> As this series is very large and depends on the dma-mapping tree I've
> also published a git tree:
> 
>     git://git.infradead.org/users/hch/misc.git powerpc-dma.4
> 
> Gitweb:
> 
>     http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.4
> 
> Changes since v3:
>  - rebase on the powerpc fixes tree
>  - add a new patch to actually make the baseline amigaone config
>    configure without warnings
>  - only use ZONE_DMA for 64-bit embedded CPUs, on pseries an IOMMU is
>    always present
>  - fix compile in mem.c for one configuration
>  - drop the full npu removal for now, will be resent separately
>  - a few git bisection fixes
> 
> The changes since v1 are to big to list and v2 was not posted in public.
> 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-27  7:42 ` use generic DMA mapping code in powerpc V4 Christoph Hellwig
@ 2018-11-27 22:05   ` Benjamin Herrenschmidt
  2018-11-28 11:05   ` Michael Ellerman
  2018-11-30  3:17   ` Benjamin Herrenschmidt
  2 siblings, 0 replies; 178+ messages in thread
From: Benjamin Herrenschmidt @ 2018-11-27 22:05 UTC (permalink / raw)
  To: Christoph Hellwig, Paul Mackerras, Michael Ellerman
  Cc: linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

On Tue, 2018-11-27 at 08:42 +0100, Christoph Hellwig wrote:
> Any comments?  I'd like to at least get the ball moving on the easy
> bits.

I completely missed your posting of V4 ! I was wondering what was
taking you so long :)

I'll give it a spin & send acks over the next 2 or 3 days.

Cheers,
Ben.

> On Wed, Nov 14, 2018 at 09:22:40AM +0100, Christoph Hellwig wrote:
> > Hi all,
> > 
> > this series switches the powerpc port to use the generic swiotlb and
> > noncoherent dma ops, and to use more generic code for the coherent
> > direct mapping, as well as removing a lot of dead code.
> > 
> > As this series is very large and depends on the dma-mapping tree I've
> > also published a git tree:
> > 
> >     git://git.infradead.org/users/hch/misc.git powerpc-dma.4
> > 
> > Gitweb:
> > 
> >     http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.4
> > 
> > Changes since v3:
> >  - rebase on the powerpc fixes tree
> >  - add a new patch to actually make the baseline amigaone config
> >    configure without warnings
> >  - only use ZONE_DMA for 64-bit embedded CPUs, on pseries an IOMMU is
> >    always present
> >  - fix compile in mem.c for one configuration
> >  - drop the full npu removal for now, will be resent separately
> >  - a few git bisection fixes
> > 
> > The changes since v1 are to big to list and v2 was not posted in public.
> > 
> > _______________________________________________
> > iommu mailing list
> > iommu@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/iommu
> ---end quoted text---


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-27  7:42 ` use generic DMA mapping code in powerpc V4 Christoph Hellwig
  2018-11-27 22:05   ` Benjamin Herrenschmidt
@ 2018-11-28 11:05   ` Michael Ellerman
  2018-11-28 15:55     ` Christian Zigotzky
                       ` (2 more replies)
  2018-11-30  3:17   ` Benjamin Herrenschmidt
  2 siblings, 3 replies; 178+ messages in thread
From: Michael Ellerman @ 2018-11-28 11:05 UTC (permalink / raw)
  To: Christoph Hellwig, Benjamin Herrenschmidt, Paul Mackerras
  Cc: linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

Christoph Hellwig <hch@lst.de> writes:

> Any comments?  I'd like to at least get the ball moving on the easy
> bits.

Nothing specific yet.

I'm a bit worried it might break one of the many old obscure platforms
we have that aren't well tested.

There's not much we can do about that, but I'll just try and test it on
everything I can find.

Is the plan that you take these via the dma-mapping tree or that they go
via powerpc?

cheers

> On Wed, Nov 14, 2018 at 09:22:40AM +0100, Christoph Hellwig wrote:
>> Hi all,
>> 
>> this series switches the powerpc port to use the generic swiotlb and
>> noncoherent dma ops, and to use more generic code for the coherent
>> direct mapping, as well as removing a lot of dead code.
>> 
>> As this series is very large and depends on the dma-mapping tree I've
>> also published a git tree:
>> 
>>     git://git.infradead.org/users/hch/misc.git powerpc-dma.4
>> 
>> Gitweb:
>> 
>>     http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.4
>> 
>> Changes since v3:
>>  - rebase on the powerpc fixes tree
>>  - add a new patch to actually make the baseline amigaone config
>>    configure without warnings
>>  - only use ZONE_DMA for 64-bit embedded CPUs, on pseries an IOMMU is
>>    always present
>>  - fix compile in mem.c for one configuration
>>  - drop the full npu removal for now, will be resent separately
>>  - a few git bisection fixes
>> 
>> The changes since v1 are to big to list and v2 was not posted in public.
>> 
>> _______________________________________________
>> iommu mailing list
>> iommu@lists.linux-foundation.org
>> https://lists.linuxfoundation.org/mailman/listinfo/iommu
> ---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-28 11:05   ` Michael Ellerman
@ 2018-11-28 15:55     ` Christian Zigotzky
  2018-11-28 20:02       ` Christian Zigotzky
                         ` (2 more replies)
  2018-11-29 12:05     ` Christian Zigotzky
  2018-11-29 17:02     ` use generic DMA mapping code in powerpc V4 Christoph Hellwig
  2 siblings, 3 replies; 178+ messages in thread
From: Christian Zigotzky @ 2018-11-28 15:55 UTC (permalink / raw)
  To: Michael Ellerman, Christoph Hellwig, Benjamin Herrenschmidt,
	Paul Mackerras
  Cc: linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

On 28 November 2018 at 12:05PM, Michael Ellerman wrote:
> Nothing specific yet.
>
> I'm a bit worried it might break one of the many old obscure platforms
> we have that aren't well tested.
>
Please don't apply the new DMA mapping code if you don't be sure if it 
works on all supported PowerPC machines. Is the new DMA mapping code 
really necessary? It's not really nice, to rewrote code if the old code 
works perfect. We must not forget, that we work for the end users. Does 
the end user have advantages with this new code? Is it faster? The old 
code works without any problems. I am also worried about this code. How 
can I test this new DMA mapping code?

Thanks


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-28 15:55     ` Christian Zigotzky
@ 2018-11-28 20:02       ` Christian Zigotzky
  2018-11-28 20:35       ` Michal Suchánek
  2019-12-19 13:54       ` Christian Zigotzky
  2 siblings, 0 replies; 178+ messages in thread
From: Christian Zigotzky @ 2018-11-28 20:02 UTC (permalink / raw)
  To: Michael Ellerman, Christoph Hellwig, Benjamin Herrenschmidt,
	Paul Mackerras
  Cc: linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

I will compile and test the kernel from the following Git on my PowerPC machines.

http://git.infradead.org/users/hch/misc.git

On 28 November 2018 at 12:05PM, Michael Ellerman wrote:
Nothing specific yet.

I'm a bit worried it might break one of the many old obscure platforms
we have that aren't well tested.


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-28 15:55     ` Christian Zigotzky
  2018-11-28 20:02       ` Christian Zigotzky
@ 2018-11-28 20:35       ` Michal Suchánek
  2018-11-29 17:03         ` Christoph Hellwig
  2019-12-19 13:54       ` Christian Zigotzky
  2 siblings, 1 reply; 178+ messages in thread
From: Michal Suchánek @ 2018-11-28 20:35 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Michael Ellerman, Christoph Hellwig, Benjamin Herrenschmidt,
	Paul Mackerras, linux-arch, linux-mm, iommu, linuxppc-dev,
	linux-kernel

On Wed, 28 Nov 2018 16:55:30 +0100
Christian Zigotzky <chzigotzky@xenosoft.de> wrote:

> On 28 November 2018 at 12:05PM, Michael Ellerman wrote:
> > Nothing specific yet.
> >
> > I'm a bit worried it might break one of the many old obscure platforms
> > we have that aren't well tested.
> >  
> Please don't apply the new DMA mapping code if you don't be sure if it 
> works on all supported PowerPC machines. Is the new DMA mapping code 
> really necessary? It's not really nice, to rewrote code if the old code 
> works perfect. We must not forget, that we work for the end users. Does 
> the end user have advantages with this new code? Is it faster? The old 
> code works without any problems. 

There is another service provided to the users as well: new code that is
cleaner and simpler which allows easier bug fixes and new features.
Without being familiar with the DMA mapping code I cannot really say if
that's the case here.

> I am also worried about this code. How 
> can I test this new DMA mapping code?

I suppose if your machine works it works for you.

Thanks

Michal

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-28 11:05   ` Michael Ellerman
  2018-11-28 15:55     ` Christian Zigotzky
@ 2018-11-29 12:05     ` Christian Zigotzky
  2018-11-29 15:30       ` Christian Zigotzky
  2018-11-29 17:03       ` Christoph Hellwig
  2018-11-29 17:02     ` use generic DMA mapping code in powerpc V4 Christoph Hellwig
  2 siblings, 2 replies; 178+ messages in thread
From: Christian Zigotzky @ 2018-11-29 12:05 UTC (permalink / raw)
  To: Michael Ellerman, Christoph Hellwig, Benjamin Herrenschmidt,
	Paul Mackerras
  Cc: linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel, Olof Johansson

On 28 November 2018 at 12:05PM, Michael Ellerman wrote:
> Christoph Hellwig <hch@lst.de> writes:
>
>> Any comments?  I'd like to at least get the ball moving on the easy
>> bits.
> Nothing specific yet.
>
> I'm a bit worried it might break one of the many old obscure platforms
> we have that aren't well tested.
>
> There's not much we can do about that, but I'll just try and test it on
> everything I can find.
>
> Is the plan that you take these via the dma-mapping tree or that they go
> via powerpc?
>
> cheers
>
Hi All,

I compiled a test kernel from the following Git today.

http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.4

Command: git clone git://git.infradead.org/users/hch/misc.git -b 
powerpc-dma.4 a

Unfortunately I get some DMA error messages and the PASEMI ethernet 
doesn't work anymore.

[  367.627623] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.627631] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.627639] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.627647] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.627655] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.627686] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.628418] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.628505] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.628592] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.629324] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.629417] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.629495] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.629589] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0

[  430.424732]pasemi_mac: rcmdsta error: 0x04ef3001

I tested this kernel with the Nemo board (CPU: PWRficient PA6T-1682M). 
The PASEMI ethernet works with the RC4 of kernel 4.20.

Cheers,
Christian

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-29 12:05     ` Christian Zigotzky
@ 2018-11-29 15:30       ` Christian Zigotzky
  2018-11-29 17:03       ` Christoph Hellwig
  1 sibling, 0 replies; 178+ messages in thread
From: Christian Zigotzky @ 2018-11-29 15:30 UTC (permalink / raw)
  To: Michael Ellerman, Christoph Hellwig, Benjamin Herrenschmidt,
	Paul Mackerras
  Cc: linux-arch, linux-kernel, linux-mm, iommu, Olof Johansson, linuxppc-dev

On 29 November 2018 at 1:05PM, Christian Zigotzky wrote:
> On 28 November 2018 at 12:05PM, Michael Ellerman wrote:
>> Christoph Hellwig <hch@lst.de> writes:
>>
>>> Any comments?  I'd like to at least get the ball moving on the easy
>>> bits.
>> Nothing specific yet.
>>
>> I'm a bit worried it might break one of the many old obscure platforms
>> we have that aren't well tested.
>>
>> There's not much we can do about that, but I'll just try and test it on
>> everything I can find.
>>
>> Is the plan that you take these via the dma-mapping tree or that they go
>> via powerpc?
>>
>> cheers
>>
> Hi All,
>
> I compiled a test kernel from the following Git today.
>
> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.4 
>
>
> Command: git clone git://git.infradead.org/users/hch/misc.git -b 
> powerpc-dma.4 a
>
> Unfortunately I get some DMA error messages and the PASEMI ethernet 
> doesn't work anymore.
>
> [  367.627623] pci 0000:00:1a.0: dma_direct_map_page: overflow 
> 0x000000026bcb5002+110 of device mask ffffffff bus mask 0
> [  367.627631] pci 0000:00:1a.0: dma_direct_map_page: overflow 
> 0x000000026bcb5002+110 of device mask ffffffff bus mask 0
> [  367.627639] pci 0000:00:1a.0: dma_direct_map_page: overflow 
> 0x000000026bcb5002+110 of device mask ffffffff bus mask 0
> [  367.627647] pci 0000:00:1a.0: dma_direct_map_page: overflow 
> 0x000000026bcb5002+110 of device mask ffffffff bus mask 0
> [  367.627655] pci 0000:00:1a.0: dma_direct_map_page: overflow 
> 0x000000026bcb5002+110 of device mask ffffffff bus mask 0
> [  367.627686] pci 0000:00:1a.0: dma_direct_map_page: overflow 
> 0x000000026bcb5002+110 of device mask ffffffff bus mask 0
> [  367.628418] pci 0000:00:1a.0: dma_direct_map_page: overflow 
> 0x000000026bcb5002+110 of device mask ffffffff bus mask 0
> [  367.628505] pci 0000:00:1a.0: dma_direct_map_page: overflow 
> 0x000000026bcb5002+110 of device mask ffffffff bus mask 0
> [  367.628592] pci 0000:00:1a.0: dma_direct_map_page: overflow 
> 0x000000026bcb5002+110 of device mask ffffffff bus mask 0
> [  367.629324] pci 0000:00:1a.0: dma_direct_map_page: overflow 
> 0x000000026bcb5002+110 of device mask ffffffff bus mask 0
> [  367.629417] pci 0000:00:1a.0: dma_direct_map_page: overflow 
> 0x000000026bcb5002+110 of device mask ffffffff bus mask 0
> [  367.629495] pci 0000:00:1a.0: dma_direct_map_page: overflow 
> 0x000000026bcb5002+110 of device mask ffffffff bus mask 0
> [  367.629589] pci 0000:00:1a.0: dma_direct_map_page: overflow 
> 0x000000026bcb5002+110 of device mask ffffffff bus mask 0
>
> [  430.424732]pasemi_mac: rcmdsta error: 0x04ef3001
>
> I tested this kernel with the Nemo board (CPU: PWRficient PA6T-1682M). 
> The PASEMI ethernet works with the RC4 of kernel 4.20.
>
> Cheers,
> Christian
>
Hi All,

I tested this kernel on my NXP QorIQ P5020 board. U-Boot loads the dtb 
file and the kernel and after that the booting stops. This board works 
with the RC4 of kernel 4.20. Please test this kernel on your NXP and 
PASEMI boards.

Thanks,
Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-28 11:05   ` Michael Ellerman
  2018-11-28 15:55     ` Christian Zigotzky
  2018-11-29 12:05     ` Christian Zigotzky
@ 2018-11-29 17:02     ` Christoph Hellwig
  2 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-29 17:02 UTC (permalink / raw)
  To: Michael Ellerman
  Cc: Christoph Hellwig, Benjamin Herrenschmidt, Paul Mackerras,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

On Wed, Nov 28, 2018 at 10:05:19PM +1100, Michael Ellerman wrote:
> Is the plan that you take these via the dma-mapping tree or that they go
> via powerpc?

In principle either way is fine with me.  If it goes through the powerpc
tree we might run into a few minor conflicts with the dma-mapping tree
depending on how some of the current discussions go.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-28 20:35       ` Michal Suchánek
@ 2018-11-29 17:03         ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-29 17:03 UTC (permalink / raw)
  To: Michal Suchánek
  Cc: Christian Zigotzky, Michael Ellerman, Christoph Hellwig,
	Benjamin Herrenschmidt, Paul Mackerras, linux-arch, linux-mm,
	iommu, linuxppc-dev, linux-kernel

> > Please don't apply the new DMA mapping code if you don't be sure if it 
> > works on all supported PowerPC machines. Is the new DMA mapping code 
> > really necessary? It's not really nice, to rewrote code if the old code 
> > works perfect. We must not forget, that we work for the end users. Does 
> > the end user have advantages with this new code? Is it faster? The old 
> > code works without any problems. 
> 
> There is another service provided to the users as well: new code that is
> cleaner and simpler which allows easier bug fixes and new features.
> Without being familiar with the DMA mapping code I cannot really say if
> that's the case here.

Yes, the main point is to move all architecturs to common code for the
dma direct mapping code.  This means we have one code bases that sees
bugs fixed and features introduced the same way for everyone.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-29 12:05     ` Christian Zigotzky
  2018-11-29 15:30       ` Christian Zigotzky
@ 2018-11-29 17:03       ` Christoph Hellwig
  2018-11-29 23:07         ` Christian Zigotzky
  1 sibling, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-29 17:03 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Michael Ellerman, Christoph Hellwig, Benjamin Herrenschmidt,
	Paul Mackerras, linux-arch, linux-mm, iommu, linuxppc-dev,
	linux-kernel, Olof Johansson

On Thu, Nov 29, 2018 at 01:05:23PM +0100, Christian Zigotzky wrote:
> I compiled a test kernel from the following Git today.
>
> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.4
>
> Command: git clone git://git.infradead.org/users/hch/misc.git -b 
> powerpc-dma.4 a
>
> Unfortunately I get some DMA error messages and the PASEMI ethernet doesn't 
> work anymore.

What kind of machine is this (and your other one)?  Can you send me
(or point me to) the .config files?

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-29 17:03       ` Christoph Hellwig
@ 2018-11-29 23:07         ` Christian Zigotzky
  2018-11-30 10:53           ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-11-29 23:07 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel,
	Olof Johansson

[-- Attachment #1: Type: text/plain, Size: 2090 bytes --]

On 29 November 2018 at 6:03PM, Christoph Hellwig wrote:
> On Thu, Nov 29, 2018 at 01:05:23PM +0100, Christian Zigotzky wrote:
>> I compiled a test kernel from the following Git today.
>>
>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.4
>>
>> Command: git clone git://git.infradead.org/users/hch/misc.git -b
>> powerpc-dma.4 a
>>
>> Unfortunately I get some DMA error messages and the PASEMI ethernet doesn't
>> work anymore.
> What kind of machine is this (and your other one)?  Can you send me
> (or point me to) the .config files?
>
Hello Christoph,

Thanks for your reply and sorry for my bad email at the beginning. I 
have bad experiences with rewroting of good working code. Actually I 
work for the first level Linux support at A-EON Technology Ltd. Our 
customers are typically desktop users. That means, we don't have always 
time to hunt kernel bugs. Our customers are only interested in new 
features, stability etc. It is really difficult to explain them about 
rewroting of good working code as a new feature. For us as a first level 
support it is very difficult and time intensive to look why the new code 
doesn't work.

@All
Please also think of us because we have to explain your work to the end 
customer. And it is really hard for us and time intensive to prove 
mistakes because of rewroting code over and over again in opposite to you.
It is really a pity if you replace a good working code (The work from 
another developer with a lot of bug fixes) with a buggy code. 
Incidentally, it is also expensive. (time + money)

@Christoph
Anyway, back to testing. I tested your kernel on an A-EON AmigaOne X1000 
and on an A-EON AmigaOne X5000 today.

More information:

A-EON AmigaOne X1000 (Nemo kernel config attached):

- https://en.wikipedia.org/wiki/AmigaOne_X1000
- http://www.amigaos.net/hardware/35/amigaone-x1000

A-EON AmigaOne X5000 (Cyrus kernel config attached):

- http://www.amigaos.net/hardware/133/amigaone-x5000
- http://wiki.amiga.org/index.php/AmigaONE_X5000

Please find attached the kernel configs.

Thanks,
Christian


[-- Attachment #2: cyrus-4.20-rc4.config --]
[-- Type: text/plain, Size: 135799 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 4.20.0-rc4 Kernel Configuration
#

#
# Compiler: gcc (Debian 6.3.0-19) 6.3.0 20170618
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=60300
CONFIG_CLANG_VERSION=0
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="_A-EON_A1-X5000"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_KERNEL_GZIP=y
CONFIG_DEFAULT_HOSTNAME="AmigaOneX5000"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_SYSCALL is not set
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
CONFIG_PPC64=y

#
# Processor support
#
# CONFIG_PPC_BOOK3S_64 is not set
CONFIG_PPC_BOOK3E_64=y
# CONFIG_GENERIC_CPU is not set
CONFIG_E5500_CPU=y
# CONFIG_E6500_CPU is not set
CONFIG_TARGET_CPU_BOOL=y
CONFIG_PPC_BOOK3E=y
CONFIG_E500=y
CONFIG_PPC_E500MC=y
CONFIG_PPC_FPU=y
CONFIG_FSL_EMB_PERFMON=y
CONFIG_FSL_EMB_PERF_EVENT=y
CONFIG_FSL_EMB_PERF_EVENT_E500=y
CONFIG_BOOKE=y
CONFIG_PPC_FSL_BOOK3E=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_MMU_NOHASH=y
CONFIG_PPC_BOOK3E_MMU=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_PPC_DOORBELL=y
CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NR_IRQS=512
CONFIG_NMI_IPI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
CONFIG_PPC=y
CONFIG_PPC_BARRIER_NOSPEC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=180
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_UDBG_16550=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PPC_ADV_DEBUG_REGS=y
CONFIG_PPC_ADV_DEBUG_IACS=2
CONFIG_PPC_ADV_DEBUG_DACS=2
CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_ZONE_DMA32=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_PPC_MSI_BITMAP=y
CONFIG_FSL_CORENET_RCPM=y

#
# Platform support
#
CONFIG_FSL_SOC_BOOKE=y
CONFIG_PPC_QEMU_E500=y
CONFIG_CORENET_GENERIC=y
# CONFIG_KVM_GUEST is not set
CONFIG_EPAPR_PARAVIRT=y
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
CONFIG_PPC_SMP_MUXED_IPI=y
CONFIG_MPIC=y
CONFIG_MPIC_TIMER=y
# CONFIG_FSL_MPIC_TIMER_WAKEUP is not set
CONFIG_PPC_EPAPR_HV_PIC=y
CONFIG_MPIC_MSGR=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPUIdle driver
#

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# POWERPC CPU Idle Drivers
#
# CONFIG_GEN_RTC is not set
# CONFIG_SIMPLE_GPIO is not set

#
# Kernel options
#
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_MATH_EMULATION=y
CONFIG_MATH_EMULATION_FULL=y
# CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED is not set
# CONFIG_LD_HEAD_STUB_CATCH is not set
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
# CONFIG_RELOCATABLE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_ILLEGAL_POINTER_VALUE=0x5deadbeef0000000
CONFIG_PPC_4K_PAGES=y
CONFIG_THREAD_SHIFT=14
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200 console=tty0 mem=3500M"
# CONFIG_CMDLINE_FORCE is not set
CONFIG_EXTRA_TARGETS=""
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y

#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
CONFIG_FSL_LBC=y
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#

#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_HOST is not set
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_XILINX is not set

#
# DesignWare PCI Core Support
#

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# CONFIG_PCCARD is not set
CONFIG_HAS_RAPIDIO=y
CONFIG_RAPIDIO=y
CONFIG_FSL_RIO=y
# CONFIG_RAPIDIO_TSI721 is not set
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
# CONFIG_RAPIDIO_DMA_ENGINE is not set
# CONFIG_RAPIDIO_DEBUG is not set
# CONFIG_RAPIDIO_ENUM_BASIC is not set
# CONFIG_RAPIDIO_CHMAN is not set
# CONFIG_RAPIDIO_MPORT_CDEV is not set

#
# RapidIO Switch drivers
#
# CONFIG_RAPIDIO_TSI57X is not set
# CONFIG_RAPIDIO_CPS_XX is not set
# CONFIG_RAPIDIO_TSI568 is not set
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_RAPIDIO_RXS_GEN3 is not set
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_VCPU_ASYNC_IOCTL=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_BOOKE_HV=y
# CONFIG_KVM_EXIT_TIMING is not set
CONFIG_KVM_E500MC=y
CONFIG_KVM_MPIC=y
CONFIG_VHOST_NET=m
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
# CONFIG_REFCOUNT_FULL is not set

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
CONFIG_ZSMALLOC_STAT=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_FRAME_VECTOR=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_IP_MROUTE_COMMON=y
# CONFIG_IP_MROUTE is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_ESP_OFFLOAD is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
CONFIG_TCP_CONG_DCTCP=y
CONFIG_TCP_CONG_CDG=y
# CONFIG_TCP_CONG_BBR is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_DCTCP is not set
# CONFIG_DEFAULT_CDG is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_ILA=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
CONFIG_IPV6_VTI=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_FOU=y
CONFIG_IPV6_FOU_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NETFILTER_NETLINK_OSF is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NF_LOG_NETDEV is not set
# CONFIG_NF_TABLES is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
# CONFIG_NF_REJECT_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=y
CONFIG_RDS=y
CONFIG_RDS_TCP=y
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_DIAG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
# CONFIG_L2TP_V3 is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=y
# CONFIG_6LOWPAN_DEBUGFS is not set
CONFIG_6LOWPAN_NHC=y
CONFIG_6LOWPAN_NHC_DEST=y
CONFIG_6LOWPAN_NHC_FRAGMENT=y
CONFIG_6LOWPAN_NHC_HOP=y
CONFIG_6LOWPAN_NHC_IPV6=y
CONFIG_6LOWPAN_NHC_MOBILITY=y
CONFIG_6LOWPAN_NHC_ROUTING=y
CONFIG_6LOWPAN_NHC_UDP=y
# CONFIG_6LOWPAN_GHC_EXT_HDR_HOP is not set
# CONFIG_6LOWPAN_GHC_UDP is not set
# CONFIG_6LOWPAN_GHC_ICMPV6 is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_DEST is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BLA is not set
# CONFIG_BATMAN_ADV_DAT is not set
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_MCAST is not set
CONFIG_BATMAN_ADV_DEBUGFS=y
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
CONFIG_BT_LEDS=y
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_FAILOVER=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE="radeon/ARUBA_me.bin radeon/ARUBA_pfp.bin radeon/ARUBA_rlc.bin radeon/BARTS_mc.bin radeon/BARTS_me.bin radeon/BARTS_pfp.bin radeon/BARTS_smc.bin radeon/bonaire_ce.bin radeon/bonaire_mc.bin radeon/bonaire_me.bin radeon/bonaire_mec.bin  radeon/bonaire_pfp.bin radeon/bonaire_rlc.bin radeon/bonaire_sdma.bin radeon/bonaire_smc.bin radeon/BONAIRE_uvd.bin radeon/BONAIRE_vce.bin radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin radeon/CAICOS_pfp.bin radeon/CAICOS_smc.bin radeon/CAYMAN_mc.bin radeon/CAYMAN_me.bin radeon/CAYMAN_pfp.bin radeon/CAYMAN_rlc.bin radeon/CAYMAN_smc.bin radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin radeon/CEDAR_smc.bin radeon/CYPRESS_me.bin radeon/CYPRESS_pfp.bin radeon/CYPRESS_rlc.bin radeon/CYPRESS_smc.bin radeon/CYPRESS_uvd.bin radeon/hainan_ce.bin radeon/hainan_mc.bin radeon/hainan_me.bin radeon/hainan_pfp.bin radeon/hainan_rlc.bin radeon/hainan_smc.bin radeon/hawaii_ce.bin radeon/hawaii_mc.bin radeon/hawaii_me.bin radeon/hawaii_mec.bin radeon/hawaii_pfp.bin radeon/hawaii_rlc.bin radeon/hawaii_sdma.bin radeon/hawaii_smc.bin radeon/JUNIPER_me.bin radeon/JUNIPER_pfp.bin radeon/JUNIPER_rlc.bin radeon/JUNIPER_smc.bin radeon/kabini_ce.bin radeon/kabini_me.bin radeon/kabini_mec.bin radeon/kabini_pfp.bin radeon/kabini_rlc.bin radeon/kabini_sdma.bin radeon/kaveri_ce.bin radeon/kaveri_me.bin radeon/kaveri_mec2.bin radeon/kaveri_mec.bin radeon/kaveri_pfp.bin radeon/kaveri_rlc.bin radeon/kaveri_sdma.bin radeon/mullins_ce.bin radeon/mullins_me.bin radeon/mullins_mec.bin radeon/mullins_pfp.bin radeon/mullins_rlc.bin radeon/mullins_sdma.bin radeon/oland_ce.bin radeon/oland_mc.bin radeon/oland_me.bin radeon/oland_pfp.bin radeon/oland_rlc.bin radeon/oland_smc.bin radeon/PALM_me.bin radeon/PALM_pfp.bin radeon/pitcairn_ce.bin radeon/pitcairn_k_smc.bin radeon/pitcairn_mc.bin radeon/pitcairn_me.bin radeon/pitcairn_pfp.bin radeon/pitcairn_rlc.bin radeon/pitcairn_smc.bin radeon/R100_cp.bin radeon/R200_cp.bin radeon/R300_cp.bin radeon/R420_cp.bin radeon/R520_cp.bin radeon/R600_me.bin radeon/R600_pfp.bin radeon/R600_rlc.bin radeon/R600_uvd.bin radeon/R700_rlc.bin radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin radeon/REDWOOD_rlc.bin radeon/REDWOOD_smc.bin radeon/RS600_cp.bin radeon/RS690_cp.bin radeon/RS780_me.bin radeon/RS780_pfp.bin radeon/RS780_uvd.bin radeon/RV610_me.bin radeon/RV610_pfp.bin radeon/RV620_me.bin radeon/RV620_pfp.bin radeon/RV630_me.bin radeon/RV630_pfp.bin radeon/RV635_me.bin radeon/RV635_pfp.bin radeon/RV670_me.bin radeon/RV670_pfp.bin radeon/RV710_me.bin radeon/RV710_pfp.bin radeon/RV710_smc.bin radeon/RV710_uvd.bin radeon/RV730_me.bin radeon/RV730_pfp.bin radeon/RV730_smc.bin radeon/RV740_smc.bin radeon/RV770_me.bin radeon/RV770_pfp.bin radeon/RV770_smc.bin radeon/RV770_uvd.bin radeon/SUMO2_me.bin radeon/SUMO2_pfp.bin radeon/SUMO_me.bin radeon/SUMO_pfp.bin radeon/SUMO_rlc.bin radeon/SUMO_uvd.bin radeon/tahiti_ce.bin radeon/tahiti_mc.bin radeon/tahiti_me.bin radeon/tahiti_pfp.bin radeon/tahiti_rlc.bin radeon/tahiti_smc.bin radeon/TAHITI_uvd.bin radeon/TAHITI_vce.bin radeon/TURKS_mc.bin radeon/TURKS_me.bin radeon/TURKS_pfp.bin radeon/TURKS_smc.bin radeon/verde_ce.bin radeon/verde_mc.bin radeon/verde_me.bin radeon/verde_pfp.bin radeon/verde_rlc.bin radeon/verde_smc.bin radeon/si58_mc.bin radeon/hawaii_k_smc.bin radeon/hainan_k_smc.bin radeon/bonaire_k_smc.bin radeon/tahiti_k_smc.bin radeon/oland_k_smc.bin radeon/verde_k_smc.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set

#
# Bus devices
#
# CONFIG_SIMPLE_PM_BUS is not set
# CONFIG_CONNECTOR is not set
# CONFIG_GNSS is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set

#
# Partition parsers
#

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_MCHP23K256 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_NAND_DENALI_PCI is not set
# CONFIG_MTD_NAND_DENALI_DT is not set
# CONFIG_MTD_NAND_GPIO is not set
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_MTD_NAND_FSL_IFC=y
# CONFIG_MTD_SPI_NAND is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_MT81xx_NOR is not set
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_ZRAM=y
# CONFIG_ZRAM_WRITEBACK is not set
# CONFIG_ZRAM_MEMORY_TRACKING is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=m

#
# Intel MIC & related support
#

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_AHCI_CEVA is not set
CONFIG_AHCI_QORIQ=y
CONFIG_SATA_FSL=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=y
# CONFIG_SATA_NV is not set
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_SIL680=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BCACHE=y
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_UNSTRIPED is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_RIONET is not set
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FSL_FMAN=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_FSL_XGMAC_MDIO=y
CONFIG_GIANFAR=y
CONFIG_FSL_DPAA_ETH=y
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SMSC is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_MDIO_BUS_MUX=y
CONFIG_MDIO_BUS_MUX_GPIO=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
CONFIG_AQUANTIA_PHY=y
# CONFIG_ASIX_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
CONFIG_MICROCHIP_PHY=y
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=y
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPPOATM is not set
CONFIG_PPPOE=y
# CONFIG_PPPOL2TP is not set
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_LAN78XX=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ADM8211=m
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
CONFIG_AT76C50X_USB=m
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_SDIO is not set
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
# CONFIG_B43_PHY_G is not set
# CONFIG_B43_PHY_N is not set
# CONFIG_B43_PHY_LP is not set
# CONFIG_B43_PHY_HT is not set
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_HERMES=m
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
# CONFIG_ORINOCO_USB is not set
# CONFIG_P54_COMMON is not set
CONFIG_PRISM54=m
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x0U is not set
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT76x2U is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
# CONFIG_RT2800USB_RT3573 is not set
# CONFIG_RT2800USB_RT53XX is not set
# CONFIG_RT2800USB_RT55XX is not set
# CONFIG_RT2800USB_UNKNOWN is not set
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
# CONFIG_RTL8XXXU is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=m
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PEARL_PCIE is not set
# CONFIG_MAC80211_HWSIM is not set
CONFIG_USB_NET_RNDIS_WLAN=m

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_PSXPAD_SPI is not set
# CONFIG_JOYSTICK_PXRC is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_AR1021_I2C=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=m
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
# CONFIG_TOUCHSCREEN_EXC3000 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
CONFIG_TOUCHSCREEN_ILI210X=m
# CONFIG_TOUCHSCREEN_S6SY761 is not set
CONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MELFAS_MIP4=m
CONFIG_TOUCHSCREEN_MTOUCH=m
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=m
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=m
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_PIXCIR=m
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
CONFIG_TOUCHSCREEN_TSC2004=m
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
CONFIG_TOUCHSCREEN_ST1232=m
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
CONFIG_TOUCHSCREEN_SX8654=m
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_ATI_REMOTE2=m
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_CM109=m
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_PPC_EPAPR_HV_BYTECHAN=y
# CONFIG_PPC_EARLY_DEBUG_EHV_BC is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_ASPEED_VUART is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SERIAL_8250_MOXA is not set
# CONFIG_SERIAL_OF_PLATFORM is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_UDBG is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=m
CONFIG_HW_RANDOM_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# CONFIG_RANDOM_TRUST_CPU is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
CONFIG_SPI_GPIO=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_CPM=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_FSL_ESPI=y
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_QORIQ=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PINCTRL is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_FTGPIO010 is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_MOCKUP is not set
CONFIG_GPIO_MPC8XXX=y
# CONFIG_GPIO_XILINX is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set

#
# MFD GPIO expanders
#

#
# PCI GPIO expanders
#
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set

#
# USB GPIO expanders
#
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_RESET_SYSCON is not set
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LTC3651 is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_QORIQ_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_AT91_USART is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=m
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_REGULATOR is not set
CONFIG_CEC_CORE=y
CONFIG_RC_CORE=m
# CONFIG_RC_MAP is not set
# CONFIG_LIRC is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
# CONFIG_IR_IMON_DECODER is not set
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
# CONFIG_IR_IMON_RAW is not set
CONFIG_IR_MCEUSB=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
CONFIG_RC_LOOPBACK=m
CONFIG_IR_GPIO_CIR=m
# CONFIG_IR_SERIAL is not set
# CONFIG_IR_SIR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
# CONFIG_MEDIA_CEC_SUPPORT is not set
CONFIG_MEDIA_CONTROLLER=y
# CONFIG_MEDIA_CONTROLLER_DVB is not set
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_FWNODE=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_DVB_CORE=m
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_DTCS033 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_JL2005BCD is not set
# CONFIG_USB_GSPCA_KINECT is not set
# CONFIG_USB_GSPCA_KONICA is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_NW80X is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SE401 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SPCA1528 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_SQ930X is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STK1135 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TOPRO is not set
# CONFIG_USB_GSPCA_TOUPTEK is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160=m
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
# CONFIG_DVB_USB_AF9005 is not set
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
# CONFIG_DVB_USB_ZD1301 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m

#
# Software defined radio USB devices
#
# CONFIG_USB_AIRSPY is not set
# CONFIG_USB_HACKRF is not set
# CONFIG_USB_MSI2500 is not set
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
# CONFIG_VIDEO_DT3155 is not set

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_OSD is not set
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_DVB_NETUP_UNIDVB is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_VIDEO_CADENCE is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIVID is not set
# CONFIG_VIDEO_VIM2M is not set
# CONFIG_VIDEO_VICODEC is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
# CONFIG_SDR_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_SMS_SDIO_DRV is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_USB_KEENE=m
CONFIG_USB_RAREMONO=m
CONFIG_USB_MA901=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=m

#
# Texas Instruments WL128x FM driver (ST based)
#

#
# Supported FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m

#
# Camera sensor devices
#
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_MT9V011=m

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# SDR tuner chips
#

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m

#
# Sensors used on soc_camera driver
#

#
# Media SPI Adapters
#
# CONFIG_CXD2880_SPI_DRV is not set
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_GP8PSK_FE=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=3
CONFIG_DRM=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#

#
# AMD Library routines
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_CIRRUS_QEMU=y
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_LVDS is not set
CONFIG_DRM_QXL=y
CONFIG_DRM_BOCHS=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_LG_LG4573 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_DUMB_VGA_DAC is not set
# CONFIG_DRM_LVDS_ENCODER is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_ARCPGU is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_MXSFB is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_OF is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_FSL_DIU is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=y
CONFIG_SND_SEQ_MIDI=y
CONFIG_SND_SEQ_MIDI_EMUL=y
CONFIG_SND_SEQ_VIRMIDI=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_OPL3_LIB_SEQ=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=y
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
CONFIG_SND_CTXFI=m
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=y
CONFIG_SND_EMU10K1_SEQ=y
CONFIG_SND_EMU10K1X=y
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
# CONFIG_SND_ES1968_INPUT is not set
# CONFIG_SND_ES1968_RADIO is not set
CONFIG_SND_FM801=y
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_ANALOG=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_SIGMATEL=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_VIA=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_CONEXANT=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_CA0110=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_CA0132=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_SI3054=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_GENERIC=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_PPC is not set
# CONFIG_SND_SPI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_UA101=y
CONFIG_SND_USB_USX2Y=y
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_FIREWIRE=y
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
# CONFIG_SND_ISIGHT is not set
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_SYNTH_EMUX=y
CONFIG_AC97_BUS=y

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_HID_LOGITECH_HIDPP=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=m
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEAM=y
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_WACOM=m
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
CONFIG_USB_SERIAL_IR=m
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
CONFIG_USB_SERIAL_GARMIN=m
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=m
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ATM is not set

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=y
# CONFIG_UWB is not set
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
# CONFIG_PWRSEQ_SD8787 is not set
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_SDHCI_OF_ARASAN is not set
# CONFIG_MMC_SDHCI_OF_AT91 is not set
CONFIG_MMC_SDHCI_OF_ESDHC=y
# CONFIG_MMC_SDHCI_OF_HLWD is not set
# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set
# CONFIG_MMC_SDHCI_CADENCE is not set
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_CQHCI=y
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_MMC_SDHCI_OMAP is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AS3645A is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_CR0014114 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_LM3601X is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_KTD2692 is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MPC85XX is not set
# CONFIG_EDAC_CPC925 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_DS1374_WDT is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_R7301 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_DW_AXI_DMAC is not set
CONFIG_FSL_DMA=y
CONFIG_FSL_EDMA=y
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_FSL_ELBC_GPCM is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_VIRT_DRIVERS=y
CONFIG_FSL_HV_MANAGER=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_CLK_HSDK is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
CONFIG_CLK_QORIQ=y
# CONFIG_COMMON_CLK_VC5 is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_MAILBOX=y
# CONFIG_PLATFORM_MHU is not set
CONFIG_ALTERA_MBOX=y
# CONFIG_MAILBOX_TEST is not set
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_FSL_PAMU is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
# CONFIG_RPMSG_CHAR is not set
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
CONFIG_RPMSG_VIRTIO=y
# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#

#
# Broadcom SoC drivers
#

#
# NXP/Freescale QorIQ SoC drivers
#
CONFIG_FSL_DPAA=y
# CONFIG_FSL_DPAA_CHECKING is not set
# CONFIG_FSL_BMAN_TEST is not set
# CONFIG_FSL_QMAN_TEST is not set
CONFIG_FSL_GUTS=y

#
# i.MX SoC drivers
#

#
# Qualcomm SoC drivers
#
# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
CONFIG_FSL_CORENET_CF=y
CONFIG_FSL_IFC=y
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_CADENCE_DP is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
# CONFIG_PHY_QCOM_USB_HS is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_TUSB1210 is not set
CONFIG_POWERCAP=y
# CONFIG_IDLE_INJECT is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=y
CONFIG_NVMEM=y

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set

#
# File systems
#
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_ENCRYPTION=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FS_ENCRYPTION is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_UBIFS_FS is not set
# CONFIG_UBIFS_FS_AUTHENTICATION is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
# CONFIG_CRAMFS_MTD is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_SWAP is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128L is not set
# CONFIG_CRYPTO_AEGIS256 is not set
# CONFIG_CRYPTO_MORUS640 is not set
# CONFIG_CRYPTO_MORUS1280 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MD5_PPC is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=m
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_PPC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DIRECT_OPS=y
CONFIG_SWIOTLB=y
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_6x10 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_STACKTRACE is not set
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_PPC_EMULATED_STATS=y
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
# CONFIG_XMON is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_PPC_PTDUMP is not set

[-- Attachment #3: nemo-4.20-rc4.config --]
[-- Type: text/plain, Size: 115957 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 4.20.0-rc4 Kernel Configuration
#

#
# Compiler: gcc (Debian 6.3.0-19) 6.3.0 20170618
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=60300
CONFIG_CLANG_VERSION=0
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="_A-EON_AmigaOne_X1000_Nemo"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_DEFAULT_HOSTNAME="AmigaOneX1000"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_SYSCALL is not set
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_PPC64=y

#
# Processor support
#
CONFIG_PPC_BOOK3S_64=y
# CONFIG_PPC_BOOK3E_64 is not set
CONFIG_GENERIC_CPU=y
# CONFIG_CELL_CPU is not set
# CONFIG_POWER5_CPU is not set
# CONFIG_POWER6_CPU is not set
# CONFIG_POWER7_CPU is not set
# CONFIG_POWER8_CPU is not set
# CONFIG_POWER9_CPU is not set
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
CONFIG_PPC_STD_MMU=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_PPC_RADIX_MMU=y
CONFIG_PPC_RADIX_MMU_DEFAULT=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PPC_MM_SLICES=y
CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=33
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NR_IRQS=512
CONFIG_NMI_IPI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
CONFIG_PPC=y
CONFIG_PPC_BARRIER_NOSPEC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=180
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_UDBG_16550=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ZONE_DMA32=y
CONFIG_PGTABLE_LEVELS=4

#
# Platform support
#
# CONFIG_PPC_POWERNV is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
CONFIG_PPC_PASEMI=y

#
# PA Semi PWRficient options
#
CONFIG_PPC_PASEMI_NEMO=y
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_PPC_DT_CPU_FTRS is not set
CONFIG_MPIC=y
# CONFIG_MPIC_MSGR is not set
CONFIG_PPC_I8259=y
CONFIG_MPIC_BROKEN_REGREAD=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPUIdle driver
#

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# CONFIG_GEN_RTC is not set
# CONFIG_SIMPLE_GPIO is not set

#
# Kernel options
#
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_PPC_TRANSACTIONAL_MEM is not set
# CONFIG_LD_HEAD_STUB_CATCH is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PPC64_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# CONFIG_RELOCATABLE is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_ILLEGAL_POINTER_VALUE=0x5deadbeef0000000
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_THREAD_SHIFT=14
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
# CONFIG_PPC_DENORMALISATION is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
# CONFIG_HIBERNATION is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_PPC_MEM_KEYS=y
CONFIG_ISA_DMA_API=y

#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_FSL_LBC is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#

#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_HOST is not set
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_XILINX is not set

#
# DesignWare PCI Core Support
#

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_ELECTRA_CF=y
# CONFIG_RAPIDIO is not set
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_VCPU_ASYNC_IOCTL=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_BOOK3S_HANDLER=y
CONFIG_KVM_BOOK3S_64_HANDLER=y
CONFIG_KVM_BOOK3S_PR_POSSIBLE=y
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_PR=m
CONFIG_KVM_XICS=y
CONFIG_VHOST_NET=m
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_NMI_WATCHDOG=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_ARCH_HAS_SCALED_CPUTIME=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
# CONFIG_STRICT_KERNEL_RWX is not set
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
# CONFIG_REFCOUNT_FULL is not set

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_ZONE_DEVICE=y
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_IP_MROUTE is not set
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_LEDS is not set
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_AG6XX is not set
# CONFIG_BT_HCIUART_MRVL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
# CONFIG_FAILOVER is not set
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE="radeon/ARUBA_me.bin radeon/ARUBA_pfp.bin radeon/ARUBA_rlc.bin radeon/BARTS_mc.bin radeon/BARTS_me.bin radeon/BARTS_pfp.bin radeon/BARTS_smc.bin radeon/bonaire_ce.bin radeon/bonaire_mc.bin radeon/bonaire_me.bin radeon/bonaire_mec.bin  radeon/bonaire_pfp.bin radeon/bonaire_rlc.bin radeon/bonaire_sdma.bin radeon/bonaire_smc.bin radeon/BONAIRE_uvd.bin radeon/BONAIRE_vce.bin radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin radeon/CAICOS_pfp.bin radeon/CAICOS_smc.bin radeon/CAYMAN_mc.bin radeon/CAYMAN_me.bin radeon/CAYMAN_pfp.bin radeon/CAYMAN_rlc.bin radeon/CAYMAN_smc.bin radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin radeon/CEDAR_smc.bin radeon/CYPRESS_me.bin radeon/CYPRESS_pfp.bin radeon/CYPRESS_rlc.bin radeon/CYPRESS_smc.bin radeon/CYPRESS_uvd.bin radeon/hainan_ce.bin radeon/hainan_mc.bin radeon/hainan_me.bin radeon/hainan_pfp.bin radeon/hainan_rlc.bin radeon/hainan_smc.bin radeon/hawaii_ce.bin radeon/hawaii_mc.bin radeon/hawaii_me.bin radeon/hawaii_mec.bin radeon/hawaii_pfp.bin radeon/hawaii_rlc.bin radeon/hawaii_sdma.bin radeon/hawaii_smc.bin radeon/JUNIPER_me.bin radeon/JUNIPER_pfp.bin radeon/JUNIPER_rlc.bin radeon/JUNIPER_smc.bin radeon/kabini_ce.bin radeon/kabini_me.bin radeon/kabini_mec.bin radeon/kabini_pfp.bin radeon/kabini_rlc.bin radeon/kabini_sdma.bin radeon/kaveri_ce.bin radeon/kaveri_me.bin radeon/kaveri_mec2.bin radeon/kaveri_mec.bin radeon/kaveri_pfp.bin radeon/kaveri_rlc.bin radeon/kaveri_sdma.bin radeon/mullins_ce.bin radeon/mullins_me.bin radeon/mullins_mec.bin radeon/mullins_pfp.bin radeon/mullins_rlc.bin radeon/mullins_sdma.bin radeon/oland_ce.bin radeon/oland_mc.bin radeon/oland_me.bin radeon/oland_pfp.bin radeon/oland_rlc.bin radeon/oland_smc.bin radeon/PALM_me.bin radeon/PALM_pfp.bin radeon/pitcairn_ce.bin radeon/pitcairn_k_smc.bin radeon/pitcairn_mc.bin radeon/pitcairn_me.bin radeon/pitcairn_pfp.bin radeon/pitcairn_rlc.bin radeon/pitcairn_smc.bin radeon/R100_cp.bin radeon/R200_cp.bin radeon/R300_cp.bin radeon/R420_cp.bin radeon/R520_cp.bin radeon/R600_me.bin radeon/R600_pfp.bin radeon/R600_rlc.bin radeon/R600_uvd.bin radeon/R700_rlc.bin radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin radeon/REDWOOD_rlc.bin radeon/REDWOOD_smc.bin radeon/RS600_cp.bin radeon/RS690_cp.bin radeon/RS780_me.bin radeon/RS780_pfp.bin radeon/RS780_uvd.bin radeon/RV610_me.bin radeon/RV610_pfp.bin radeon/RV620_me.bin radeon/RV620_pfp.bin radeon/RV630_me.bin radeon/RV630_pfp.bin radeon/RV635_me.bin radeon/RV635_pfp.bin radeon/RV670_me.bin radeon/RV670_pfp.bin radeon/RV710_me.bin radeon/RV710_pfp.bin radeon/RV710_smc.bin radeon/RV710_uvd.bin radeon/RV730_me.bin radeon/RV730_pfp.bin radeon/RV730_smc.bin radeon/RV740_smc.bin radeon/RV770_me.bin radeon/RV770_pfp.bin radeon/RV770_smc.bin radeon/RV770_uvd.bin radeon/SUMO2_me.bin radeon/SUMO2_pfp.bin radeon/SUMO_me.bin radeon/SUMO_pfp.bin radeon/SUMO_rlc.bin radeon/SUMO_uvd.bin radeon/tahiti_ce.bin radeon/tahiti_mc.bin radeon/tahiti_me.bin radeon/tahiti_pfp.bin radeon/tahiti_rlc.bin radeon/tahiti_smc.bin radeon/TAHITI_uvd.bin radeon/TAHITI_vce.bin radeon/TURKS_mc.bin radeon/TURKS_me.bin radeon/TURKS_pfp.bin radeon/TURKS_smc.bin radeon/verde_ce.bin radeon/verde_mc.bin radeon/verde_me.bin radeon/verde_pfp.bin radeon/verde_rlc.bin radeon/verde_smc.bin radeon/si58_mc.bin radeon/hawaii_k_smc.bin radeon/hainan_k_smc.bin radeon/bonaire_k_smc.bin radeon/tahiti_k_smc.bin radeon/oland_k_smc.bin radeon/verde_k_smc.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set

#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=m

#
# Intel MIC & related support
#

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_CEVA is not set
# CONFIG_AHCI_QORIQ is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_UNSTRIPED is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_NET_VENDOR_ARC=y
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FUJITSU=y
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
CONFIG_NE2K_PCI=y
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PASEMI=y
CONFIG_PASEMI_MAC=y
# CONFIG_NET_VENDOR_QLOGIC is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SMSC is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
CONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_ASIX_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
CONFIG_MARVELL_PHY=y
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=y
# CONFIG_XILINX_GMII2RGMII is not set
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
# CONFIG_PPP_MPPE is not set
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPPOE=y
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
# CONFIG_AIRO_CS is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_HERMES=y
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=y
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=y
# CONFIG_PCMCIA_HERMES is not set
# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_ORINOCO_USB is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x0U is not set
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT76x2U is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
# CONFIG_RT2500USB is not set
# CONFIG_RT73USB is not set
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=y
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_USB=m
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=m
# CONFIG_RTL8XXXU is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PEARL_PCIE is not set
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_NETDEVSIM is not set
# CONFIG_NET_FAILOVER is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=900
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_PXRC is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
# CONFIG_TABLET_USB_PEGASUS is not set
CONFIG_TABLET_SERIAL_WACOM4=y
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=2
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_ASPEED_VUART is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_MOXA is not set
CONFIG_SERIAL_OF_PLATFORM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_PASEMI=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_SCR24X is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# CONFIG_RANDOM_TRUST_CPU is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PASEMI=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_QORIQ_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AT91_USART is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_REGULATOR is not set
CONFIG_CEC_CORE=y
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
# CONFIG_LIRC is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_XMP_DECODER=y
# CONFIG_IR_IMON_DECODER is not set
# CONFIG_RC_DEVICES is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_MEDIA_CEC_RC is not set
CONFIG_MEDIA_CONTROLLER=y
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# CONFIG_VIDEO_PCI_SKELETON is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_V4L2_FWNODE=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_DVB_CORE=m
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
CONFIG_DVB_ULE_DEBUG=y

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_DTCS033 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_JL2005BCD is not set
# CONFIG_USB_GSPCA_KINECT is not set
# CONFIG_USB_GSPCA_KONICA is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_NW80X is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SE401 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SPCA1528 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_SQ930X is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STK1135 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TOPRO is not set
# CONFIG_USB_GSPCA_TOUPTEK is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
CONFIG_USB_PWC=m
CONFIG_USB_PWC_DEBUG=y
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160=m
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_USB_ZD1301=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y
CONFIG_DVB_AS102=m

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m

#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=m
CONFIG_USB_HACKRF=m

#
# USB HDMI CEC adapters
#
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
CONFIG_VIDEO_SOLO6X10=m
CONFIG_VIDEO_TW5864=m
CONFIG_VIDEO_TW68=m
CONFIG_VIDEO_TW686X=m

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS=y
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DT3155=m

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
# CONFIG_VIDEO_SAA7134_GO7007 is not set
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG=y
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
CONFIG_DVB_PT3=m
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
CONFIG_DVB_SMIPCIE=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_CAFE_CCIC=m
# CONFIG_VIDEO_CADENCE is not set
CONFIG_VIDEO_MUX=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_VIDEO_XILINX=m
CONFIG_VIDEO_XILINX_TPG=m
CONFIG_VIDEO_XILINX_VTC=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_SH_VEU=m
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIMC is not set
# CONFIG_VIDEO_VIVID is not set
# CONFIG_VIDEO_VIM2M is not set
# CONFIG_VIDEO_VICODEC is not set
CONFIG_DVB_PLATFORM_DRIVERS=y
# CONFIG_CEC_PLATFORM_DRIVERS is not set
# CONFIG_SDR_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_SMS_SDIO_DRV is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_USB_KEENE=m
CONFIG_USB_RAREMONO=m
CONFIG_USB_MA901=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=m

#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_SONY_BTF_MPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m

#
# Camera sensor devices
#
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_MT9V011=m

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# SDR tuner chips
#

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m

#
# Sensors used on soc_camera driver
#

#
# soc_camera sensor drivers
#
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
# CONFIG_SOC_CAMERA_MT9T112 is not set
# CONFIG_SOC_CAMERA_MT9V022 is not set
# CONFIG_SOC_CAMERA_OV5642 is not set
# CONFIG_SOC_CAMERA_OV772X is not set
# CONFIG_SOC_CAMERA_OV9640 is not set
# CONFIG_SOC_CAMERA_OV9740 is not set
# CONFIG_SOC_CAMERA_RJ54N1 is not set
# CONFIG_SOC_CAMERA_TW9910 is not set
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_AS102_FE=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_GP8PSK_FE=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_VGA_ARB is not set
CONFIG_DRM=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#

#
# AMD Library routines
#
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_CIRRUS_QEMU=y
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_LVDS is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_DUMB_VGA_DAC is not set
# CONFIG_DRM_LVDS_ENCODER is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_ARCPGU is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_OF is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_HDMI=y

#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=y
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
CONFIG_SND_CMIPCI=y
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=y
# CONFIG_SND_EMU10K1X is not set
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_ES1938=y
CONFIG_SND_ES1968=y
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_FM801=y
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
CONFIG_SND_HDA_CODEC_SIGMATEL=y
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_HDMI=y
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
CONFIG_SND_HDA_CODEC_CA0132=y
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_PPC is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_UA101=y
CONFIG_SND_USB_USX2Y=y
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=y
CONFIG_SND_USB_HIFACE=y
CONFIG_SND_BCD2000=y
CONFIG_SND_USB_LINE6=y
CONFIG_SND_USB_POD=y
CONFIG_SND_USB_PODHD=y
CONFIG_SND_USB_TONEPORT=y
CONFIG_SND_USB_VARIAX=y
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
CONFIG_AC97_BUS=y

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_HIDPP is not set
# CONFIG_LOGITECH_FF is not set
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=y
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_WACOM=y
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
# CONFIG_PWRSEQ_SD8787 is not set
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_CQHCI is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_PASEMI=y
# CONFIG_EDAC_CPC925 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_R7301 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_DW_AXI_DMAC is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_RTL8723BS is not set
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_R8822BE is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_XGI is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_LTE_GDM724X is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_WILC1000_SDIO is not set
# CONFIG_MOST is not set
# CONFIG_KS7010 is not set
# CONFIG_GREYBUS is not set
# CONFIG_MTK_MMC is not set

#
# Gasket devices
#
# CONFIG_XIL_AXIS_FIFO is not set
# CONFIG_EROFS_FS is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_DEBUGFS is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#

#
# Broadcom SoC drivers
#

#
# NXP/Freescale QorIQ SoC drivers
#

#
# i.MX SoC drivers
#

#
# Qualcomm SoC drivers
#
# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_CADENCE_DP is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=y
CONFIG_NVMEM=y

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
CONFIG_MULTIPLEXER=m

#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set

#
# File systems
#
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_UBIFS_FS_AUTHENTICATION is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_SWAP is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128L is not set
# CONFIG_CRYPTO_AEGIS256 is not set
# CONFIG_CRYPTO_MORUS640 is not set
# CONFIG_CRYPTO_MORUS1280 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_VPMSUM is not set
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MD5_PPC is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_PPC is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_NX is not set
# CONFIG_CRYPTO_DEV_VMX is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_PREEMPTIRQ_EVENTS is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_UPROBE_EVENTS is not set
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
CONFIG_PPC_DISABLE_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_PPC_PTDUMP is not set
# CONFIG_PPC_FAST_ENDIAN_SWITCH is not set

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-27  7:42 ` use generic DMA mapping code in powerpc V4 Christoph Hellwig
  2018-11-27 22:05   ` Benjamin Herrenschmidt
  2018-11-28 11:05   ` Michael Ellerman
@ 2018-11-30  3:17   ` Benjamin Herrenschmidt
  2 siblings, 0 replies; 178+ messages in thread
From: Benjamin Herrenschmidt @ 2018-11-30  3:17 UTC (permalink / raw)
  To: Christoph Hellwig, Paul Mackerras, Michael Ellerman
  Cc: linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

On Tue, 2018-11-27 at 08:42 +0100, Christoph Hellwig wrote:
> Any comments?  I'd like to at least get the ball moving on the easy
> bits.

So I had to cleanup some dust but it works on G5 with and without iommu
and 32-bit powermacs at least.

We're doing more tests, hopefully mpe can dig out some PASemi and
NXP/FSL HW as well. I'll try to review & ack the patches over the next
few days too.

Cheers,
Ben.

> On Wed, Nov 14, 2018 at 09:22:40AM +0100, Christoph Hellwig wrote:
> > Hi all,
> > 
> > this series switches the powerpc port to use the generic swiotlb and
> > noncoherent dma ops, and to use more generic code for the coherent
> > direct mapping, as well as removing a lot of dead code.
> > 
> > As this series is very large and depends on the dma-mapping tree I've
> > also published a git tree:
> > 
> >     git://git.infradead.org/users/hch/misc.git powerpc-dma.4
> > 
> > Gitweb:
> > 
> >     http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.4
> > 
> > Changes since v3:
> >  - rebase on the powerpc fixes tree
> >  - add a new patch to actually make the baseline amigaone config
> >    configure without warnings
> >  - only use ZONE_DMA for 64-bit embedded CPUs, on pseries an IOMMU is
> >    always present
> >  - fix compile in mem.c for one configuration
> >  - drop the full npu removal for now, will be resent separately
> >  - a few git bisection fixes
> > 
> > The changes since v1 are to big to list and v2 was not posted in public.
> > 
> > _______________________________________________
> > iommu mailing list
> > iommu@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/iommu
> ---end quoted text---


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-29 23:07         ` Christian Zigotzky
@ 2018-11-30 10:53           ` Christoph Hellwig
  2018-11-30 12:23             ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-30 10:53 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, Michael Ellerman, Benjamin Herrenschmidt,
	Paul Mackerras, linux-arch, linux-mm, iommu, linuxppc-dev,
	linux-kernel, Olof Johansson

Hi Christian,

for such a diverse architecture like powerpc we'll have to rely on
users / non core developers like you to help with testing.

Can you try the patch below for he cyrus config?

For the nemo one I have no idea yet, there is no chance I could trick
you into a git bisect to see which patch caused the problem, is there?


diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 7b70dcbce1b9..2f0ca6560e47 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -47,7 +47,7 @@ struct machdep_calls {
 #endif
 #endif /* CONFIG_PPC64 */
 
-	int		(*dma_set_mask)(struct device *dev, u64 dma_mask);
+	void		(*dma_set_mask)(struct device *dev, u64 dma_mask);
 
 	int		(*probe)(void);
 	void		(*setup_arch)(void); /* Optional, may be NULL */
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index bded4127791a..2587eb0f3fde 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -22,11 +22,10 @@
 #include <asm/swiotlb.h>
 #include <asm/dma.h>
 
-bool arch_dma_set_mask(struct device *dev, u64 dma_mask)
+void arch_dma_set_mask(struct device *dev, u64 dma_mask)
 {
-	if (!ppc_md.dma_set_mask)
-		return 0;
-	return ppc_md.dma_set_mask(dev, dma_mask);
+	if (ppc_md.dma_set_mask)
+		ppc_md.dma_set_mask(dev, dma_mask);
 }
 EXPORT_SYMBOL(arch_dma_set_mask);
 
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 9584765dbe3b..8582a418516b 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -134,7 +134,7 @@ static void setup_swiotlb_ops(struct pci_controller *hose)
 static inline void setup_swiotlb_ops(struct pci_controller *hose) {}
 #endif
 
-static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
+static void fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
 {
 	/*
 	 * Fix up PCI devices that are able to DMA to the large inbound
@@ -144,8 +144,6 @@ static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
 		dev->bus_dma_mask = 0;
 		dev->archdata.dma_offset = pci64_dma_offset;
 	}
-
-	return 0;
 }
 
 static int setup_one_atmu(struct ccsr_pci __iomem *pci,
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 8dd19e66c0e5..94a4db5f7ec3 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -599,17 +599,16 @@ static inline int dma_supported(struct device *dev, u64 mask)
 }
 
 #ifdef CONFIG_ARCH_HAS_DMA_SET_MASK
-bool arch_dma_set_mask(struct device *dev, u64 mask);
+void arch_dma_set_mask(struct device *dev, u64 mask);
 #else
-#define arch_dma_set_mask(dev, mask)		true
+#define arch_dma_set_mask(dev, mask)	do { } while (0)
 #endif
 
 static inline int dma_set_mask(struct device *dev, u64 mask)
 {
 	if (!dev->dma_mask || !dma_supported(dev, mask))
 		return -EIO;
-	if (!arch_dma_set_mask(dev, mask))
-		return -EIO;
+	arch_dma_set_mask(dev, mask);
 	dma_check_mask(dev, mask);
 
 	*dev->dma_mask = mask;


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-30 10:53           ` Christoph Hellwig
@ 2018-11-30 12:23             ` Christian Zigotzky
  2018-11-30 13:10               ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-11-30 12:23 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel,
	Olof Johansson

Hi Christoph,

Thanks a lot for your fast reply.

On 30 November 2018 at 11:53AM, Christoph Hellwig wrote:
> Hi Christian,
>
> for such a diverse architecture like powerpc we'll have to rely on
> users / non core developers like you to help with testing.
I see. I will help as good as I can.
>
> Can you try the patch below for he cyrus config?
Yes, of course. I patched your Git kernel and after that I compiled it 
again. U-Boot loads the kernel and the dtb file. Then the kernel starts 
but it doesn't find any hard disks (partitions).

@All
Could you please also test Christoph's kernel on your PASEMI and NXP 
boards? Download: 'git clone git://git.infradead.org/users/hch/misc.git 
-b powerpc-dma.4 a'
*PLEASE*
>
> For the nemo one I have no idea yet,
We had some problems with the PASEMI ethernet and DMA two years ago. I 
had to deactivate the option PASEMI_IOMMU_DMA_FORCE.

commit 416f37d0816b powerpc/pasemi: Fix coherent_dma_mask for dma engine:

Commit 817820b0 ("powerpc/iommu: Support "hybrid" iommu/direct DMA
ops for coherent_mask < dma_mask) adds a check of coherent_dma_mask for
dma allocations.

Unfortunately current PASemi code does not set this value for the DMA
engine, which ends up with the default value of 0xffffffff, the result
is on a PASemi system with >2Gb ram and iommu enabled the onboard
ethernet stops working due to an inability to allocate memory. Add an
initialisation to pci_dma_dev_setup_pasemi().
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Links:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2016-July/146701.html
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=416f37d0816b9720b8227953e55954d81456f991

FYI: DMA handling has been rewritten in 2015. We had some problems with 
the new DMA code in 2015. I had to revert the commit ' [RFC/PATCH,v2] 
powerpc/iommu: Support "hybrid" iommu/direct DMA ops for coherent_mask < 
dma_mask' in 2015.

Link: https://patchwork.ozlabs.org/patch/472535/

I had to create a patch in 2015:

     diff -rupN linux-4.4/arch/powerpc/Kconfig 
linux-4.4-nemo/arch/powerpc/Kconfig
     --- linux-4.4/arch/powerpc/Kconfig    2015-12-07 00:43:12.000000000 
+0100
     +++ linux-4.4-nemo/arch/powerpc/Kconfig    2015-12-07 
14:48:23.371987988 +0100
     @@ -158,8 +155,6 @@ config PPC
          select HAVE_PERF_EVENTS_NMI if PPC64
          select EDAC_SUPPORT
          select EDAC_ATOMIC_SCRUB
     -    select ARCH_HAS_DMA_SET_COHERENT_MASK
     -    select HAVE_ARCH_SECCOMP_FILTER

      config GENERIC_CSUM
          def_bool CPU_LITTLE_ENDIAN
     @@ -419,8 +414,7 @@ config PPC64_SUPPORTS_MEMORY_FAILURE

      config KEXEC
          bool "kexec system call"
     -    depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) || 
PPC_BOOK3E
     -    select KEXEC_CORE
     +    depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
          help
            kexec is a system call that implements the ability to 
shutdown your
            current kernel, and to start another kernel.  It is like a 
reboot

     diff -rupN linux-4.4/arch/powerpc/kernel/dma.c 
linux-4.4-nemo/arch/powerpc/kernel/dma.c
     --- linux-4.4/arch/powerpc/kernel/dma.c    2015-12-07 
00:43:12.000000000 +0100
     +++ linux-4.4-nemo/arch/powerpc/kernel/dma.c    2015-12-07 
14:49:38.098286892 +0100
     @@ -40,31 +39,9 @@ static u64 __maybe_unused get_pfn_limit(
          return pfn;
      }

     -static int dma_direct_dma_supported(struct device *dev, u64 mask)
     -{
     -#ifdef CONFIG_PPC64
     -    u64 limit = get_dma_offset(dev) + (memblock_end_of_DRAM() - 1);
     -
     -    /* Limit fits in the mask, we are good */
     -    if (mask >= limit)
     -        return 1;
     -
     -#ifdef CONFIG_FSL_SOC
     -    /* Freescale gets another chance via ZONE_DMA/ZONE_DMA32, however
     -     * that will have to be refined if/when they support iommus
     -     */
     -    return 1;
     -#endif
     -    /* Sorry ... */
     -    return 0;
     -#else
     -    return 1;
     -#endif
     -}
     -
     -void *__dma_direct_alloc_coherent(struct device *dev, size_t size,
     -                  dma_addr_t *dma_handle, gfp_t flag,
     -                  struct dma_attrs *attrs)
     +void *dma_direct_alloc_coherent(struct device *dev, size_t size,
     +                dma_addr_t *dma_handle, gfp_t flag,
     +                struct dma_attrs *attrs)
      {
          void *ret;
      #ifdef CONFIG_NOT_COHERENT_CACHE
     @@ -119,9 +96,9 @@ void *__dma_direct_alloc_coherent(struct
      #endif
      }

     -void __dma_direct_free_coherent(struct device *dev, size_t size,
     -                void *vaddr, dma_addr_t dma_handle,
     -                struct dma_attrs *attrs)
     +void dma_direct_free_coherent(struct device *dev, size_t size,
     +                  void *vaddr, dma_addr_t dma_handle,
     +                  struct dma_attrs *attrs)
      {
      #ifdef CONFIG_NOT_COHERENT_CACHE
          __dma_free_coherent(size, vaddr);
     @@ -130,51 +107,6 @@ void __dma_direct_free_coherent(struct d
      #endif
      }

     -static void *dma_direct_alloc_coherent(struct device *dev, size_t 
size,
     -                       dma_addr_t *dma_handle, gfp_t flag,
     -                       struct dma_attrs *attrs)
     -{
     -    struct iommu_table *iommu;
     -
     -    /* The coherent mask may be smaller than the real mask, check if
     -     * we can really use the direct ops
     -     */
     -    if (dma_direct_dma_supported(dev, dev->coherent_dma_mask))
     -        return __dma_direct_alloc_coherent(dev, size, dma_handle,
     -                           flag, attrs);
     -
     -    /* Ok we can't ... do we have an iommu ? If not, fail */
     -    iommu = get_iommu_table_base(dev);
     -    if (!iommu)
     -        return NULL;
     -
     -    /* Try to use the iommu */
     -    return iommu_alloc_coherent(dev, iommu, size, dma_handle,
     -                    dev->coherent_dma_mask, flag,
     -                    dev_to_node(dev));
     -}
     -
     -static void dma_direct_free_coherent(struct device *dev, size_t size,
     -                     void *vaddr, dma_addr_t dma_handle,
     -                     struct dma_attrs *attrs)
     -{
     -    struct iommu_table *iommu;
     -
     -    /* See comments in dma_direct_alloc_coherent() */
     -    if (dma_direct_dma_supported(dev, dev->coherent_dma_mask))
     -        return __dma_direct_free_coherent(dev, size, vaddr, 
dma_handle,
     -                          attrs);
     -    /* Maybe we used an iommu ... */
     -    iommu = get_iommu_table_base(dev);
     -
     -    /* If we hit that we should have never allocated in the first
     -     * place so how come we are freeing ?
     -     */
     -    if (WARN_ON(!iommu))
     -        return;
     -    iommu_free_coherent(iommu, size, vaddr, dma_handle);
     -}
     -
      int dma_direct_mmap_coherent(struct device *dev, struct 
vm_area_struct *vma,
                       void *cpu_addr, dma_addr_t handle, size_t size,
                       struct dma_attrs *attrs)
     @@ -215,6 +147,18 @@ static void dma_direct_unmap_sg(struct d
      {
      }

     +static int dma_direct_dma_supported(struct device *dev, u64 mask)
     +{
     +#ifdef CONFIG_PPC64
     +    /* Could be improved so platforms can set the limit in case
     +     * they have limited DMA windows
     +     */
     +    return mask >= get_dma_offset(dev) + (memblock_end_of_DRAM() - 1);
     +#else
     +    return 1;
     +#endif
     +}
     +
      static u64 dma_direct_get_required_mask(struct device *dev)
      {
          u64 end, mask;
     @@ -286,25 +230,6 @@ struct dma_map_ops dma_direct_ops = {
      };
      EXPORT_SYMBOL(dma_direct_ops);

     -int dma_set_coherent_mask(struct device *dev, u64 mask)
     -{
     -    if (!dma_supported(dev, mask)) {
     -        /*
     -         * We need to special case the direct DMA ops which can
     -         * support a fallback for coherent allocations. There
     -         * is no dma_op->set_coherent_mask() so we have to do
     -         * things the hard way:
     -         */
     -        if (get_dma_ops(dev) != &dma_direct_ops ||
     -            get_iommu_table_base(dev) == NULL ||
     -            !dma_iommu_dma_supported(dev, mask))
     -            return -EIO;
     -    }
     -    dev->coherent_dma_mask = mask;
     -    return 0;
     -}
     -EXPORT_SYMBOL(dma_set_coherent_mask);
     -
      #define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)

      int __dma_set_mask(struct device *dev, u64 dma_mask)

Interesting PASEMI ethernet files:

arch/powerpc/platforms/pasemi/iommu.c
drivers/net/ethernet/pasemi/pasemi_mac.c
drivers/net/ethernet/pasemi/pasemi_mac.h
drivers/net/ethernet/pasemi/pasemi_mac_ethtool.c
drivers/net/ethernet/pasemi/Makefile
drivers/net/ethernet/pasemi/Kconfig

I know this is a lot of information but I hope it helps.

Thanks,
Christian

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-30 12:23             ` Christian Zigotzky
@ 2018-11-30 13:10               ` Christoph Hellwig
  2018-11-30 15:29                 ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-11-30 13:10 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, Michael Ellerman, Benjamin Herrenschmidt,
	Paul Mackerras, linux-arch, linux-mm, iommu, linuxppc-dev,
	linux-kernel, Olof Johansson

On Fri, Nov 30, 2018 at 01:23:20PM +0100, Christian Zigotzky wrote:
> Hi Christoph,
>
> Thanks a lot for your fast reply.
>
> On 30 November 2018 at 11:53AM, Christoph Hellwig wrote:
>> Hi Christian,
>>
>> for such a diverse architecture like powerpc we'll have to rely on
>> users / non core developers like you to help with testing.
> I see. I will help as good as I can.
>>
>> Can you try the patch below for he cyrus config?
> Yes, of course. I patched your Git kernel and after that I compiled it 
> again. U-Boot loads the kernel and the dtb file. Then the kernel starts but 
> it doesn't find any hard disks (partitions).

Interesting.  Does it find the storage controller (what kind of
storage does it use?).

For the PASEMI board can you test the attached patch?  Also are you
using Compact Flash cards on that system?

> @All
> Could you please also test Christoph's kernel on your PASEMI and NXP 
> boards? Download: 'git clone git://git.infradead.org/users/hch/misc.git -b 
> powerpc-dma.4 a'

FYI, I've pushed a new powerpc-dma.5 with the various fixes discussed
in this thread.


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-30 13:10               ` Christoph Hellwig
@ 2018-11-30 15:29                 ` Christian Zigotzky
  2018-12-04  7:31                   ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-11-30 15:29 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel,
	Olof Johansson, Darren Stevens, Julian Margetson

Hello Christoph,

Thanks for your reply.

On 30 November 2018 at 2:10PM, Christoph Hellwig wrote:
> On Fri, Nov 30, 2018 at 01:23:20PM +0100, Christian Zigotzky wrote:
>> Yes, of course. I patched your Git kernel and after that I compiled it
>> again. U-Boot loads the kernel and the dtb file. Then the kernel starts but
>> it doesn't find any hard disks (partitions).
> Interesting.  Does it find the storage controller (what kind of
> storage does it use?).
It seems not. I don't see any infos about hard disks in the kernel ring 
buffer. The two serial ATA (SATA 2.0) controllers are integrated in the 
P5020 SoC and the hard disks are connected via SerDes lanes (PCIe) to 
the SoC. LANE 16 = SATA 0 and LANE 17 = SATA 1.
> For the PASEMI board can you test the attached patch?  Also are you
> using Compact Flash cards on that system?
Yes, we are using Compact Flash cards. The slot is wired to the CPU 
local bus. It works with your kernel. :-)

Where is the attached patch?

I downloaded the version 5 of your Git kernel and compiled it today. 
Unfortunately the PASEMI ethernet doesn't work.

Error message: pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0

@All
Could you please also test Christoph's kernel on your PASEMI and NXP boards? Download:

'git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.5 a'

Thanks,
Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-30 15:29                 ` Christian Zigotzky
@ 2018-12-04  7:31                   ` Christian Zigotzky
  2018-12-04  9:53                     ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-04  7:31 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hi All,

Could you please test Christoph's kernel on your PASEMI and NXP boards? 
Download:

'git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.5 a'

Thanks,
Christian

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-04  7:31                   ` Christian Zigotzky
@ 2018-12-04  9:53                     ` Christian Zigotzky
  2018-12-04 14:24                       ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-04  9:53 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 04 December 2018 at 08:31AM, Christian Zigotzky wrote:
> Hi All,
>
> Could you please test Christoph's kernel on your PASEMI and NXP 
> boards? Download:
>
> 'git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.5 a'
>
> Thanks,
> Christian
>
I successfully tested this kernel on a virtual e5500 QEMU machine today.

Command: ./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -kernel 
uImage-dma -drive 
format=raw,file=MATE_PowerPC_Remix_2017_0.9.img,index=0,if=virtio -nic 
user,model=e1000 -append "rw root=/dev/vda" -device virtio-vga -device 
virtio-mouse-pci -device virtio-keyboard-pci -usb -soundhw es1370 -smp 4

QEMU version 3.1.0.

I don't know why this kernel doesn't recognize the hard disks connected 
to my physical P5020 board and why the onboard ethernet on my PASEMI 
board doesn't work. (dma_direct_map_page: overflow)

-- Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-04  9:53                     ` Christian Zigotzky
@ 2018-12-04 14:24                       ` Christoph Hellwig
  2018-12-05  9:44                         ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-04 14:24 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Tue, Dec 04, 2018 at 10:53:39AM +0100, Christian Zigotzky wrote:
> I don't know why this kernel doesn't recognize the hard disks connected to 
> my physical P5020 board and why the onboard ethernet on my PASEMI board 
> doesn't work. (dma_direct_map_page: overflow)

Do you know if this actually works for the baseline before my patches?
E.g. with commit 721c01ba8b46ddb5355bd6e6b3bbfdabfdf01e97 ?

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-04 14:24                       ` Christoph Hellwig
@ 2018-12-05  9:44                         ` Christian Zigotzky
  2018-12-05 14:05                           ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-05  9:44 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 04 December 2018 at 3:24PM, Christoph Hellwig wrote:
> On Tue, Dec 04, 2018 at 10:53:39AM +0100, Christian Zigotzky wrote:
>> I don't know why this kernel doesn't recognize the hard disks connected to
>> my physical P5020 board and why the onboard ethernet on my PASEMI board
>> doesn't work. (dma_direct_map_page: overflow)
> Do you know if this actually works for the baseline before my patches?
> E.g. with commit 721c01ba8b46ddb5355bd6e6b3bbfdabfdf01e97 ?
>
Hi Christoph,

Thanks for your reply. I undid all dma mapping commits with the 
following command:

git checkout 721c01ba8b46ddb5355bd6e6b3bbfdabfdf01e97

After that I compiled the kernels with this code for my P5020 board 
(Cyrus) and for my PASEMI board (Nemo) today.

Result: PASEMI onboard ethernet works again and the P5020 board boots.

It seems the dma mapping commits are the problem.

@All
Could you please test Christoph's kernel on your PASEMI and NXP boards? 
Download:

'git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.5 a'

Thanks,
Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-05  9:44                         ` Christian Zigotzky
@ 2018-12-05 14:05                           ` Christoph Hellwig
  2018-12-06 10:55                             ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-05 14:05 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Wed, Dec 05, 2018 at 10:44:05AM +0100, Christian Zigotzky wrote:
> Thanks for your reply. I undid all dma mapping commits with the following 
> command:
>
> git checkout 721c01ba8b46ddb5355bd6e6b3bbfdabfdf01e97
>
> After that I compiled the kernels with this code for my P5020 board (Cyrus) 
> and for my PASEMI board (Nemo) today.
>
> Result: PASEMI onboard ethernet works again and the P5020 board boots.
>
> It seems the dma mapping commits are the problem.

Thanks.  Can you try a few stepping points in the tree?

First just with commit 7fd3bb05b73beea1f9840b505aa09beb9c75a8c6
(the first one) applied?

Second with all commits up to 5da11e49df21f21dac25a2491aa788307bdacb6b

And if that still works with commits up to
c1bfcad4b0cf38ce5b00f7ad880d3a13484c123a

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-05 14:05                           ` Christoph Hellwig
@ 2018-12-06 10:55                             ` Christian Zigotzky
  2018-12-06 17:10                               ` Christian Zigotzky
  2018-12-07 13:45                               ` Christian Zigotzky
  0 siblings, 2 replies; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-06 10:55 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 05 December 2018 at 3:05PM, Christoph Hellwig wrote:
>
> Thanks.  Can you try a few stepping points in the tree?
>
> First just with commit 7fd3bb05b73beea1f9840b505aa09beb9c75a8c6
> (the first one) applied?
>
> Second with all commits up to 5da11e49df21f21dac25a2491aa788307bdacb6b
>
> And if that still works with commits up to
> c1bfcad4b0cf38ce5b00f7ad880d3a13484c123a
>
Hi Christoph,

I undid the commit 7fd3bb05b73beea1f9840b505aa09beb9c75a8c6 with the 
following command:

git checkout 7fd3bb05b73beea1f9840b505aa09beb9c75a8c6

Result: PASEMI onboard ethernet works again and the P5020 board boots.

I will test the other commits in the next days.

@All
It is really important, that you also test Christoph's work on your 
PASEMI and NXP boards. Could you please help us with solving the issues?

'git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.5 a'

Thanks,
Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 02/34] powerpc: allow NOT_COHERENT_CACHE for amigaone
  2018-11-14  8:22 ` [PATCH 02/34] powerpc: allow NOT_COHERENT_CACHE for amigaone Christoph Hellwig
@ 2018-12-06 14:09   ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-06 14:09 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

powerpc maintainers, can you pick this up as this is a bug fix for the
currently existing powerpc Kconfig code?

On Wed, Nov 14, 2018 at 09:22:42AM +0100, Christoph Hellwig wrote:
> AMIGAONE select NOT_COHERENT_CACHE, so we better allow it.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  arch/powerpc/platforms/Kconfig.cputype | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
> index f4e2c5729374..6fedbf349fce 100644
> --- a/arch/powerpc/platforms/Kconfig.cputype
> +++ b/arch/powerpc/platforms/Kconfig.cputype
> @@ -412,7 +412,8 @@ config NR_CPUS
>  
>  config NOT_COHERENT_CACHE
>  	bool
> -	depends on 4xx || PPC_8xx || E200 || PPC_MPC512x || GAMECUBE_COMMON
> +	depends on 4xx || PPC_8xx || E200 || PPC_MPC512x || \
> +		GAMECUBE_COMMON || AMIGAONE
>  	default n if PPC_47x
>  	default y
>  
> -- 
> 2.19.1
> 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 01/34] powerpc: use mm zones more sensibly
  2018-11-14  8:22 ` [PATCH 01/34] powerpc: use mm zones more sensibly Christoph Hellwig
@ 2018-12-06 14:09   ` Christoph Hellwig
  2018-12-07 12:18     ` Michael Ellerman
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-06 14:09 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

Ben / Michael,

can we get this one queued up for 4.21 to prepare for the DMA work later
on?

On Wed, Nov 14, 2018 at 09:22:41AM +0100, Christoph Hellwig wrote:
> Powerpc has somewhat odd usage where ZONE_DMA is used for all memory on
> common 64-bit configfs, and ZONE_DMA32 is used for 31-bit schemes.
> 
> Move to a scheme closer to what other architectures use (and I dare to
> say the intent of the system):
> 
>  - ZONE_DMA: optionally for memory < 31-bit (64-bit embedded only)
>  - ZONE_NORMAL: everything addressable by the kernel
>  - ZONE_HIGHMEM: memory > 32-bit for 32-bit kernels
> 
> Also provide information on how ZONE_DMA is used by defining
> ARCH_ZONE_DMA_BITS.
> 
> Contains various fixes from Benjamin Herrenschmidt.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  arch/powerpc/Kconfig                          |  8 +---
>  arch/powerpc/include/asm/page.h               |  2 +
>  arch/powerpc/include/asm/pgtable.h            |  1 -
>  arch/powerpc/kernel/dma-swiotlb.c             |  6 +--
>  arch/powerpc/kernel/dma.c                     |  7 +--
>  arch/powerpc/mm/mem.c                         | 47 +++++++------------
>  arch/powerpc/platforms/85xx/corenet_generic.c | 10 ----
>  arch/powerpc/platforms/85xx/qemu_e500.c       |  9 ----
>  include/linux/mmzone.h                        |  2 +-
>  9 files changed, 25 insertions(+), 67 deletions(-)
> 
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 8be31261aec8..cffff3613bc1 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -374,9 +374,9 @@ config PPC_ADV_DEBUG_DAC_RANGE
>  	depends on PPC_ADV_DEBUG_REGS && 44x
>  	default y
>  
> -config ZONE_DMA32
> +config ZONE_DMA
>  	bool
> -	default y if PPC64
> +	default y if PPC_BOOK3E_64
>  
>  config PGTABLE_LEVELS
>  	int
> @@ -869,10 +869,6 @@ config ISA
>  	  have an IBM RS/6000 or pSeries machine, say Y.  If you have an
>  	  embedded board, consult your board documentation.
>  
> -config ZONE_DMA
> -	bool
> -	default y
> -
>  config GENERIC_ISA_DMA
>  	bool
>  	depends on ISA_DMA_API
> diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
> index f6a1265face2..fc8c9ac0c6be 100644
> --- a/arch/powerpc/include/asm/page.h
> +++ b/arch/powerpc/include/asm/page.h
> @@ -354,4 +354,6 @@ typedef struct page *pgtable_t;
>  #endif /* __ASSEMBLY__ */
>  #include <asm/slice.h>
>  
> +#define ARCH_ZONE_DMA_BITS 31
> +
>  #endif /* _ASM_POWERPC_PAGE_H */
> diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
> index 9679b7519a35..8af32ce93c7f 100644
> --- a/arch/powerpc/include/asm/pgtable.h
> +++ b/arch/powerpc/include/asm/pgtable.h
> @@ -66,7 +66,6 @@ extern unsigned long empty_zero_page[];
>  
>  extern pgd_t swapper_pg_dir[];
>  
> -void limit_zone_pfn(enum zone_type zone, unsigned long max_pfn);
>  int dma_pfn_limit_to_zone(u64 pfn_limit);
>  extern void paging_init(void);
>  
> diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
> index 5fc335f4d9cd..678811abccfc 100644
> --- a/arch/powerpc/kernel/dma-swiotlb.c
> +++ b/arch/powerpc/kernel/dma-swiotlb.c
> @@ -108,12 +108,8 @@ int __init swiotlb_setup_bus_notifier(void)
>  
>  void __init swiotlb_detect_4g(void)
>  {
> -	if ((memblock_end_of_DRAM() - 1) > 0xffffffff) {
> +	if ((memblock_end_of_DRAM() - 1) > 0xffffffff)
>  		ppc_swiotlb_enable = 1;
> -#ifdef CONFIG_ZONE_DMA32
> -		limit_zone_pfn(ZONE_DMA32, (1ULL << 32) >> PAGE_SHIFT);
> -#endif
> -	}
>  }
>  
>  static int __init check_swiotlb_enabled(void)
> diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
> index dbfc7056d7df..6551685a4ed0 100644
> --- a/arch/powerpc/kernel/dma.c
> +++ b/arch/powerpc/kernel/dma.c
> @@ -50,7 +50,7 @@ static int dma_nommu_dma_supported(struct device *dev, u64 mask)
>  		return 1;
>  
>  #ifdef CONFIG_FSL_SOC
> -	/* Freescale gets another chance via ZONE_DMA/ZONE_DMA32, however
> +	/* Freescale gets another chance via ZONE_DMA, however
>  	 * that will have to be refined if/when they support iommus
>  	 */
>  	return 1;
> @@ -94,13 +94,10 @@ void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
>  	}
>  
>  	switch (zone) {
> +#ifdef CONFIG_ZONE_DMA
>  	case ZONE_DMA:
>  		flag |= GFP_DMA;
>  		break;
> -#ifdef CONFIG_ZONE_DMA32
> -	case ZONE_DMA32:
> -		flag |= GFP_DMA32;
> -		break;
>  #endif
>  	};
>  #endif /* CONFIG_FSL_SOC */
> diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
> index 0a64fffabee1..c0b676c3a5ba 100644
> --- a/arch/powerpc/mm/mem.c
> +++ b/arch/powerpc/mm/mem.c
> @@ -246,35 +246,19 @@ static int __init mark_nonram_nosave(void)
>  }
>  #endif
>  
> -static bool zone_limits_final;
> -
>  /*
> - * The memory zones past TOP_ZONE are managed by generic mm code.
> - * These should be set to zero since that's what every other
> - * architecture does.
> + * Zones usage:
> + *
> + * We setup ZONE_DMA to be 31-bits on all platforms and ZONE_NORMAL to be
> + * everything else. GFP_DMA32 page allocations automatically fall back to
> + * ZONE_DMA.
> + *
> + * By using 31-bit unconditionally, we can exploit ARCH_ZONE_DMA_BITS to
> + * inform the generic DMA mapping code.  32-bit only devices (if not handled
> + * by an IOMMU anyway) will take a first dip into ZONE_NORMAL and get
> + * otherwise served by ZONE_DMA.
>   */
> -static unsigned long max_zone_pfns[MAX_NR_ZONES] = {
> -	[0            ... TOP_ZONE        ] = ~0UL,
> -	[TOP_ZONE + 1 ... MAX_NR_ZONES - 1] = 0
> -};
> -
> -/*
> - * Restrict the specified zone and all more restrictive zones
> - * to be below the specified pfn.  May not be called after
> - * paging_init().
> - */
> -void __init limit_zone_pfn(enum zone_type zone, unsigned long pfn_limit)
> -{
> -	int i;
> -
> -	if (WARN_ON(zone_limits_final))
> -		return;
> -
> -	for (i = zone; i >= 0; i--) {
> -		if (max_zone_pfns[i] > pfn_limit)
> -			max_zone_pfns[i] = pfn_limit;
> -	}
> -}
> +static unsigned long max_zone_pfns[MAX_NR_ZONES];
>  
>  /*
>   * Find the least restrictive zone that is entirely below the
> @@ -324,11 +308,14 @@ void __init paging_init(void)
>  	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
>  	       (long int)((top_of_ram - total_ram) >> 20));
>  
> +#ifdef CONFIG_ZONE_DMA
> +	max_zone_pfns[ZONE_DMA]	= min(max_low_pfn, 0x7fffffffUL >> PAGE_SHIFT);
> +#endif
> +	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
>  #ifdef CONFIG_HIGHMEM
> -	limit_zone_pfn(ZONE_NORMAL, lowmem_end_addr >> PAGE_SHIFT);
> +	max_zone_pfns[ZONE_HIGHMEM] = max_pfn;
>  #endif
> -	limit_zone_pfn(TOP_ZONE, top_of_ram >> PAGE_SHIFT);
> -	zone_limits_final = true;
> +
>  	free_area_init_nodes(max_zone_pfns);
>  
>  	mark_nonram_nosave();
> diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
> index ac191a7a1337..b0dac307bebf 100644
> --- a/arch/powerpc/platforms/85xx/corenet_generic.c
> +++ b/arch/powerpc/platforms/85xx/corenet_generic.c
> @@ -68,16 +68,6 @@ void __init corenet_gen_setup_arch(void)
>  
>  	swiotlb_detect_4g();
>  
> -#if defined(CONFIG_FSL_PCI) && defined(CONFIG_ZONE_DMA32)
> -	/*
> -	 * Inbound windows don't cover the full lower 4 GiB
> -	 * due to conflicts with PCICSRBAR and outbound windows,
> -	 * so limit the DMA32 zone to 2 GiB, to allow consistent
> -	 * allocations to succeed.
> -	 */
> -	limit_zone_pfn(ZONE_DMA32, 1UL << (31 - PAGE_SHIFT));
> -#endif
> -
>  	pr_info("%s board\n", ppc_md.name);
>  
>  	mpc85xx_qe_init();
> diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c
> index b63a8548366f..27631c607f3d 100644
> --- a/arch/powerpc/platforms/85xx/qemu_e500.c
> +++ b/arch/powerpc/platforms/85xx/qemu_e500.c
> @@ -45,15 +45,6 @@ static void __init qemu_e500_setup_arch(void)
>  
>  	fsl_pci_assign_primary();
>  	swiotlb_detect_4g();
> -#if defined(CONFIG_FSL_PCI) && defined(CONFIG_ZONE_DMA32)
> -	/*
> -	 * Inbound windows don't cover the full lower 4 GiB
> -	 * due to conflicts with PCICSRBAR and outbound windows,
> -	 * so limit the DMA32 zone to 2 GiB, to allow consistent
> -	 * allocations to succeed.
> -	 */
> -	limit_zone_pfn(ZONE_DMA32, 1UL << (31 - PAGE_SHIFT));
> -#endif
>  	mpc85xx_smp_init();
>  }
>  
> diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
> index 847705a6d0ec..e2d01ccd071d 100644
> --- a/include/linux/mmzone.h
> +++ b/include/linux/mmzone.h
> @@ -314,7 +314,7 @@ enum zone_type {
>  	 * Architecture		Limit
>  	 * ---------------------------
>  	 * parisc, ia64, sparc	<4G
> -	 * s390			<2G
> +	 * s390, powerpc	<2G
>  	 * arm			Various
>  	 * alpha		Unlimited or 0-16MB.
>  	 *
> -- 
> 2.19.1
> 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 03/34] powerpc/dma: remove the unused ARCH_HAS_DMA_MMAP_COHERENT define
  2018-11-14  8:22 ` [PATCH 03/34] powerpc/dma: remove the unused ARCH_HAS_DMA_MMAP_COHERENT define Christoph Hellwig
@ 2018-12-06 14:09   ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-06 14:09 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

ping?

On Wed, Nov 14, 2018 at 09:22:43AM +0100, Christoph Hellwig wrote:
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
>  arch/powerpc/include/asm/dma-mapping.h | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
> index 8fa394520af6..f2a4a7142b1e 100644
> --- a/arch/powerpc/include/asm/dma-mapping.h
> +++ b/arch/powerpc/include/asm/dma-mapping.h
> @@ -112,7 +112,5 @@ extern int dma_set_mask(struct device *dev, u64 dma_mask);
>  
>  extern u64 __dma_get_required_mask(struct device *dev);
>  
> -#define ARCH_HAS_DMA_MMAP_COHERENT
> -
>  #endif /* __KERNEL__ */
>  #endif	/* _ASM_DMA_MAPPING_H */
> -- 
> 2.19.1
> 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 04/34] powerpc/dma: remove the unused ISA_DMA_THRESHOLD export
  2018-11-14  8:22 ` [PATCH 04/34] powerpc/dma: remove the unused ISA_DMA_THRESHOLD export Christoph Hellwig
@ 2018-12-06 14:10   ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-06 14:10 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

ping?

On Wed, Nov 14, 2018 at 09:22:44AM +0100, Christoph Hellwig wrote:
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
>  arch/powerpc/kernel/setup_32.c | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
> index 81909600013a..07f7e6aaf104 100644
> --- a/arch/powerpc/kernel/setup_32.c
> +++ b/arch/powerpc/kernel/setup_32.c
> @@ -59,7 +59,6 @@ unsigned long ISA_DMA_THRESHOLD;
>  unsigned int DMA_MODE_READ;
>  unsigned int DMA_MODE_WRITE;
>  
> -EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
>  EXPORT_SYMBOL(DMA_MODE_READ);
>  EXPORT_SYMBOL(DMA_MODE_WRITE);
>  
> -- 
> 2.19.1
> 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 05/34] powerpc/dma: remove the unused dma_iommu_ops export
  2018-11-14  8:22 ` [PATCH 05/34] powerpc/dma: remove the unused dma_iommu_ops export Christoph Hellwig
@ 2018-12-06 14:10   ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-06 14:10 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

ping?

On Wed, Nov 14, 2018 at 09:22:45AM +0100, Christoph Hellwig wrote:
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  arch/powerpc/kernel/dma-iommu.c | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
> index f9fe2080ceb9..2ca6cfaebf65 100644
> --- a/arch/powerpc/kernel/dma-iommu.c
> +++ b/arch/powerpc/kernel/dma-iommu.c
> @@ -6,7 +6,6 @@
>   * busses using the iommu infrastructure
>   */
>  
> -#include <linux/export.h>
>  #include <asm/iommu.h>
>  
>  /*
> @@ -123,4 +122,3 @@ struct dma_map_ops dma_iommu_ops = {
>  	.get_required_mask	= dma_iommu_get_required_mask,
>  	.mapping_error		= dma_iommu_mapping_error,
>  };
> -EXPORT_SYMBOL(dma_iommu_ops);
> -- 
> 2.19.1
> 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 07/34] powerpc/dma: remove the no-op dma_nommu_unmap_{page, sg} routines
  2018-11-14  8:22 ` [PATCH 07/34] powerpc/dma: remove the no-op dma_nommu_unmap_{page,sg} routines Christoph Hellwig
@ 2018-12-06 14:10   ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-06 14:10 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

ping?

On Wed, Nov 14, 2018 at 09:22:47AM +0100, Christoph Hellwig wrote:
> These methods are optional, no need to implement no-op versions.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
>  arch/powerpc/kernel/dma.c | 16 ----------------
>  1 file changed, 16 deletions(-)
> 
> diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
> index d6deb458bb91..7078d72baec2 100644
> --- a/arch/powerpc/kernel/dma.c
> +++ b/arch/powerpc/kernel/dma.c
> @@ -197,12 +197,6 @@ static int dma_nommu_map_sg(struct device *dev, struct scatterlist *sgl,
>  	return nents;
>  }
>  
> -static void dma_nommu_unmap_sg(struct device *dev, struct scatterlist *sg,
> -				int nents, enum dma_data_direction direction,
> -				unsigned long attrs)
> -{
> -}
> -
>  static u64 dma_nommu_get_required_mask(struct device *dev)
>  {
>  	u64 end, mask;
> @@ -228,14 +222,6 @@ static inline dma_addr_t dma_nommu_map_page(struct device *dev,
>  	return page_to_phys(page) + offset + get_dma_offset(dev);
>  }
>  
> -static inline void dma_nommu_unmap_page(struct device *dev,
> -					 dma_addr_t dma_address,
> -					 size_t size,
> -					 enum dma_data_direction direction,
> -					 unsigned long attrs)
> -{
> -}
> -
>  #ifdef CONFIG_NOT_COHERENT_CACHE
>  static inline void dma_nommu_sync_sg(struct device *dev,
>  		struct scatterlist *sgl, int nents,
> @@ -261,10 +247,8 @@ const struct dma_map_ops dma_nommu_ops = {
>  	.free				= dma_nommu_free_coherent,
>  	.mmap				= dma_nommu_mmap_coherent,
>  	.map_sg				= dma_nommu_map_sg,
> -	.unmap_sg			= dma_nommu_unmap_sg,
>  	.dma_supported			= dma_nommu_dma_supported,
>  	.map_page			= dma_nommu_map_page,
> -	.unmap_page			= dma_nommu_unmap_page,
>  	.get_required_mask		= dma_nommu_get_required_mask,
>  #ifdef CONFIG_NOT_COHERENT_CACHE
>  	.sync_single_for_cpu 		= dma_nommu_sync_single,
> -- 
> 2.19.1
> 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 06/34] powerpc/dma: split the two __dma_alloc_coherent implementations
  2018-11-14  8:22 ` [PATCH 06/34] powerpc/dma: split the two __dma_alloc_coherent implementations Christoph Hellwig
@ 2018-12-06 14:10   ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-06 14:10 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

ping?

On Wed, Nov 14, 2018 at 09:22:46AM +0100, Christoph Hellwig wrote:
> The implemementation for the CONFIG_NOT_COHERENT_CACHE case doesn't share
> any code with the one for systems with coherent caches.  Split it off
> and merge it with the helpers in dma-noncoherent.c that have no other
> callers.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
>  arch/powerpc/include/asm/dma-mapping.h |  5 -----
>  arch/powerpc/kernel/dma.c              | 14 ++------------
>  arch/powerpc/mm/dma-noncoherent.c      | 15 +++++++--------
>  arch/powerpc/platforms/44x/warp.c      |  2 +-
>  4 files changed, 10 insertions(+), 26 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
> index f2a4a7142b1e..dacd0f93f2b2 100644
> --- a/arch/powerpc/include/asm/dma-mapping.h
> +++ b/arch/powerpc/include/asm/dma-mapping.h
> @@ -39,9 +39,6 @@ extern int dma_nommu_mmap_coherent(struct device *dev,
>   * to ensure it is consistent.
>   */
>  struct device;
> -extern void *__dma_alloc_coherent(struct device *dev, size_t size,
> -				  dma_addr_t *handle, gfp_t gfp);
> -extern void __dma_free_coherent(size_t size, void *vaddr);
>  extern void __dma_sync(void *vaddr, size_t size, int direction);
>  extern void __dma_sync_page(struct page *page, unsigned long offset,
>  				 size_t size, int direction);
> @@ -52,8 +49,6 @@ extern unsigned long __dma_get_coherent_pfn(unsigned long cpu_addr);
>   * Cache coherent cores.
>   */
>  
> -#define __dma_alloc_coherent(dev, gfp, size, handle)	NULL
> -#define __dma_free_coherent(size, addr)		((void)0)
>  #define __dma_sync(addr, size, rw)		((void)0)
>  #define __dma_sync_page(pg, off, sz, rw)	((void)0)
>  
> diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
> index 6551685a4ed0..d6deb458bb91 100644
> --- a/arch/powerpc/kernel/dma.c
> +++ b/arch/powerpc/kernel/dma.c
> @@ -62,18 +62,12 @@ static int dma_nommu_dma_supported(struct device *dev, u64 mask)
>  #endif
>  }
>  
> +#ifndef CONFIG_NOT_COHERENT_CACHE
>  void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
>  				  dma_addr_t *dma_handle, gfp_t flag,
>  				  unsigned long attrs)
>  {
>  	void *ret;
> -#ifdef CONFIG_NOT_COHERENT_CACHE
> -	ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
> -	if (ret == NULL)
> -		return NULL;
> -	*dma_handle += get_dma_offset(dev);
> -	return ret;
> -#else
>  	struct page *page;
>  	int node = dev_to_node(dev);
>  #ifdef CONFIG_FSL_SOC
> @@ -110,19 +104,15 @@ void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
>  	*dma_handle = __pa(ret) + get_dma_offset(dev);
>  
>  	return ret;
> -#endif
>  }
>  
>  void __dma_nommu_free_coherent(struct device *dev, size_t size,
>  				void *vaddr, dma_addr_t dma_handle,
>  				unsigned long attrs)
>  {
> -#ifdef CONFIG_NOT_COHERENT_CACHE
> -	__dma_free_coherent(size, vaddr);
> -#else
>  	free_pages((unsigned long)vaddr, get_order(size));
> -#endif
>  }
> +#endif /* !CONFIG_NOT_COHERENT_CACHE */
>  
>  static void *dma_nommu_alloc_coherent(struct device *dev, size_t size,
>  				       dma_addr_t *dma_handle, gfp_t flag,
> diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
> index b6e7b5952ab5..e955539686a4 100644
> --- a/arch/powerpc/mm/dma-noncoherent.c
> +++ b/arch/powerpc/mm/dma-noncoherent.c
> @@ -29,7 +29,7 @@
>  #include <linux/string.h>
>  #include <linux/types.h>
>  #include <linux/highmem.h>
> -#include <linux/dma-mapping.h>
> +#include <linux/dma-direct.h>
>  #include <linux/export.h>
>  
>  #include <asm/tlbflush.h>
> @@ -151,8 +151,8 @@ static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsi
>   * Allocate DMA-coherent memory space and return both the kernel remapped
>   * virtual and bus address for that space.
>   */
> -void *
> -__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
> +void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
> +		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
>  {
>  	struct page *page;
>  	struct ppc_vm_region *c;
> @@ -223,7 +223,7 @@ __dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t
>  		/*
>  		 * Set the "dma handle"
>  		 */
> -		*handle = page_to_phys(page);
> +		*dma_handle = phys_to_dma(dev, page_to_phys(page));
>  
>  		do {
>  			SetPageReserved(page);
> @@ -249,12 +249,12 @@ __dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t
>   no_page:
>  	return NULL;
>  }
> -EXPORT_SYMBOL(__dma_alloc_coherent);
>  
>  /*
>   * free a page as defined by the above mapping.
>   */
> -void __dma_free_coherent(size_t size, void *vaddr)
> +void __dma_nommu_free_coherent(struct device *dev, size_t size, void *vaddr,
> +		dma_addr_t dma_handle, unsigned long attrs)
>  {
>  	struct ppc_vm_region *c;
>  	unsigned long flags, addr;
> @@ -309,7 +309,6 @@ void __dma_free_coherent(size_t size, void *vaddr)
>  	       __func__, vaddr);
>  	dump_stack();
>  }
> -EXPORT_SYMBOL(__dma_free_coherent);
>  
>  /*
>   * make an area consistent.
> @@ -401,7 +400,7 @@ EXPORT_SYMBOL(__dma_sync_page);
>  
>  /*
>   * Return the PFN for a given cpu virtual address returned by
> - * __dma_alloc_coherent. This is used by dma_mmap_coherent()
> + * __dma_nommu_alloc_coherent. This is used by dma_mmap_coherent()
>   */
>  unsigned long __dma_get_coherent_pfn(unsigned long cpu_addr)
>  {
> diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
> index a886c2c22097..7e4f8ca19ce8 100644
> --- a/arch/powerpc/platforms/44x/warp.c
> +++ b/arch/powerpc/platforms/44x/warp.c
> @@ -47,7 +47,7 @@ static int __init warp_probe(void)
>  	if (!of_machine_is_compatible("pika,warp"))
>  		return 0;
>  
> -	/* For __dma_alloc_coherent */
> +	/* For __dma_nommu_alloc_coherent */
>  	ISA_DMA_THRESHOLD = ~0L;
>  
>  	return 1;
> -- 
> 2.19.1
> 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 08/34] powerpc/dma: untangle vio_dma_mapping_ops from dma_iommu_ops
  2018-11-14  8:22 ` [PATCH 08/34] powerpc/dma: untangle vio_dma_mapping_ops from dma_iommu_ops Christoph Hellwig
@ 2018-12-06 14:10   ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-06 14:10 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

ping?

On Wed, Nov 14, 2018 at 09:22:48AM +0100, Christoph Hellwig wrote:
> vio_dma_mapping_ops currently does a lot of indirect calls through
> dma_iommu_ops, which not only make the code harder to follow but are
> also expensive in the post-spectre world.  Unwind the indirect calls
> by calling the ppc_iommu_* or iommu_* APIs directly applicable, or
> just use the dma_iommu_* methods directly where we can.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  arch/powerpc/include/asm/iommu.h     |  1 +
>  arch/powerpc/kernel/dma-iommu.c      |  2 +-
>  arch/powerpc/platforms/pseries/vio.c | 87 ++++++++++++----------------
>  3 files changed, 38 insertions(+), 52 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
> index 35db0cbc9222..75daa10f31a4 100644
> --- a/arch/powerpc/include/asm/iommu.h
> +++ b/arch/powerpc/include/asm/iommu.h
> @@ -242,6 +242,7 @@ static inline int __init tce_iommu_bus_notifier_init(void)
>  }
>  #endif /* !CONFIG_IOMMU_API */
>  
> +u64 dma_iommu_get_required_mask(struct device *dev);
>  int dma_iommu_mapping_error(struct device *dev, dma_addr_t dma_addr);
>  
>  #else
> diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
> index 2ca6cfaebf65..0613278abf9f 100644
> --- a/arch/powerpc/kernel/dma-iommu.c
> +++ b/arch/powerpc/kernel/dma-iommu.c
> @@ -92,7 +92,7 @@ int dma_iommu_dma_supported(struct device *dev, u64 mask)
>  		return 1;
>  }
>  
> -static u64 dma_iommu_get_required_mask(struct device *dev)
> +u64 dma_iommu_get_required_mask(struct device *dev)
>  {
>  	struct iommu_table *tbl = get_iommu_table_base(dev);
>  	u64 mask;
> diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
> index 88f1ad1d6309..ea3a9745c812 100644
> --- a/arch/powerpc/platforms/pseries/vio.c
> +++ b/arch/powerpc/platforms/pseries/vio.c
> @@ -492,7 +492,9 @@ static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size,
>  		return NULL;
>  	}
>  
> -	ret = dma_iommu_ops.alloc(dev, size, dma_handle, flag, attrs);
> +	ret = iommu_alloc_coherent(dev, get_iommu_table_base(dev), size,
> +				    dma_handle, dev->coherent_dma_mask, flag,
> +				    dev_to_node(dev));
>  	if (unlikely(ret == NULL)) {
>  		vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE));
>  		atomic_inc(&viodev->cmo.allocs_failed);
> @@ -507,8 +509,7 @@ static void vio_dma_iommu_free_coherent(struct device *dev, size_t size,
>  {
>  	struct vio_dev *viodev = to_vio_dev(dev);
>  
> -	dma_iommu_ops.free(dev, size, vaddr, dma_handle, attrs);
> -
> +	iommu_free_coherent(get_iommu_table_base(dev), size, vaddr, dma_handle);
>  	vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE));
>  }
>  
> @@ -518,22 +519,22 @@ static dma_addr_t vio_dma_iommu_map_page(struct device *dev, struct page *page,
>                                           unsigned long attrs)
>  {
>  	struct vio_dev *viodev = to_vio_dev(dev);
> -	struct iommu_table *tbl;
> +	struct iommu_table *tbl = get_iommu_table_base(dev);
>  	dma_addr_t ret = IOMMU_MAPPING_ERROR;
>  
> -	tbl = get_iommu_table_base(dev);
> -	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE(tbl)))) {
> -		atomic_inc(&viodev->cmo.allocs_failed);
> -		return ret;
> -	}
> -
> -	ret = dma_iommu_ops.map_page(dev, page, offset, size, direction, attrs);
> -	if (unlikely(dma_mapping_error(dev, ret))) {
> -		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE(tbl)));
> -		atomic_inc(&viodev->cmo.allocs_failed);
> -	}
> -
> +	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE(tbl))))
> +		goto out_fail;
> +	ret = iommu_map_page(dev, tbl, page, offset, size, device_to_mask(dev),
> +			direction, attrs);
> +	if (unlikely(ret == IOMMU_MAPPING_ERROR))
> +		goto out_deallocate;
>  	return ret;
> +
> +out_deallocate:
> +	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE(tbl)));
> +out_fail:
> +	atomic_inc(&viodev->cmo.allocs_failed);
> +	return IOMMU_MAPPING_ERROR;
>  }
>  
>  static void vio_dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle,
> @@ -542,11 +543,9 @@ static void vio_dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle,
>  				     unsigned long attrs)
>  {
>  	struct vio_dev *viodev = to_vio_dev(dev);
> -	struct iommu_table *tbl;
> -
> -	tbl = get_iommu_table_base(dev);
> -	dma_iommu_ops.unmap_page(dev, dma_handle, size, direction, attrs);
> +	struct iommu_table *tbl = get_iommu_table_base(dev);
>  
> +	iommu_unmap_page(tbl, dma_handle, size, direction, attrs);
>  	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE(tbl)));
>  }
>  
> @@ -555,34 +554,32 @@ static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
>                                  unsigned long attrs)
>  {
>  	struct vio_dev *viodev = to_vio_dev(dev);
> -	struct iommu_table *tbl;
> +	struct iommu_table *tbl = get_iommu_table_base(dev);
>  	struct scatterlist *sgl;
>  	int ret, count;
>  	size_t alloc_size = 0;
>  
> -	tbl = get_iommu_table_base(dev);
>  	for_each_sg(sglist, sgl, nelems, count)
>  		alloc_size += roundup(sgl->length, IOMMU_PAGE_SIZE(tbl));
>  
> -	if (vio_cmo_alloc(viodev, alloc_size)) {
> -		atomic_inc(&viodev->cmo.allocs_failed);
> -		return 0;
> -	}
> -
> -	ret = dma_iommu_ops.map_sg(dev, sglist, nelems, direction, attrs);
> -
> -	if (unlikely(!ret)) {
> -		vio_cmo_dealloc(viodev, alloc_size);
> -		atomic_inc(&viodev->cmo.allocs_failed);
> -		return ret;
> -	}
> +	if (vio_cmo_alloc(viodev, alloc_size))
> +		goto out_fail;
> +	ret = ppc_iommu_map_sg(dev, tbl, sglist, nelems, device_to_mask(dev),
> +			direction, attrs);
> +	if (unlikely(!ret))
> +		goto out_deallocate;
>  
>  	for_each_sg(sglist, sgl, ret, count)
>  		alloc_size -= roundup(sgl->dma_length, IOMMU_PAGE_SIZE(tbl));
>  	if (alloc_size)
>  		vio_cmo_dealloc(viodev, alloc_size);
> -
>  	return ret;
> +
> +out_deallocate:
> +	vio_cmo_dealloc(viodev, alloc_size);
> +out_fail:
> +	atomic_inc(&viodev->cmo.allocs_failed);
> +	return 0;
>  }
>  
>  static void vio_dma_iommu_unmap_sg(struct device *dev,
> @@ -591,30 +588,18 @@ static void vio_dma_iommu_unmap_sg(struct device *dev,
>  		unsigned long attrs)
>  {
>  	struct vio_dev *viodev = to_vio_dev(dev);
> -	struct iommu_table *tbl;
> +	struct iommu_table *tbl = get_iommu_table_base(dev);
>  	struct scatterlist *sgl;
>  	size_t alloc_size = 0;
>  	int count;
>  
> -	tbl = get_iommu_table_base(dev);
>  	for_each_sg(sglist, sgl, nelems, count)
>  		alloc_size += roundup(sgl->dma_length, IOMMU_PAGE_SIZE(tbl));
>  
> -	dma_iommu_ops.unmap_sg(dev, sglist, nelems, direction, attrs);
> -
> +	ppc_iommu_unmap_sg(tbl, sglist, nelems, direction, attrs);
>  	vio_cmo_dealloc(viodev, alloc_size);
>  }
>  
> -static int vio_dma_iommu_dma_supported(struct device *dev, u64 mask)
> -{
> -        return dma_iommu_ops.dma_supported(dev, mask);
> -}
> -
> -static u64 vio_dma_get_required_mask(struct device *dev)
> -{
> -        return dma_iommu_ops.get_required_mask(dev);
> -}
> -
>  static const struct dma_map_ops vio_dma_mapping_ops = {
>  	.alloc             = vio_dma_iommu_alloc_coherent,
>  	.free              = vio_dma_iommu_free_coherent,
> @@ -623,8 +608,8 @@ static const struct dma_map_ops vio_dma_mapping_ops = {
>  	.unmap_sg          = vio_dma_iommu_unmap_sg,
>  	.map_page          = vio_dma_iommu_map_page,
>  	.unmap_page        = vio_dma_iommu_unmap_page,
> -	.dma_supported     = vio_dma_iommu_dma_supported,
> -	.get_required_mask = vio_dma_get_required_mask,
> +	.dma_supported     = dma_iommu_mapping_error,
> +	.get_required_mask = dma_iommu_get_required_mask,
>  	.mapping_error	   = dma_iommu_mapping_error,
>  };
>  
> -- 
> 2.19.1
> 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 19/34] cxl: drop the dma_set_mask callback from vphb
  2018-11-14  8:22 ` [PATCH 19/34] cxl: drop the dma_set_mask callback from vphb Christoph Hellwig
@ 2018-12-06 14:10   ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-06 14:10 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

ping?

On Wed, Nov 14, 2018 at 09:22:59AM +0100, Christoph Hellwig wrote:
> The CXL code never even looks at the dma mask, so there is no good
> reason for this sanity check.  Remove it because it gets in the way
> of the dma ops refactoring.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  drivers/misc/cxl/vphb.c | 12 ------------
>  1 file changed, 12 deletions(-)
> 
> diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c
> index 7908633d9204..49da2f744bbf 100644
> --- a/drivers/misc/cxl/vphb.c
> +++ b/drivers/misc/cxl/vphb.c
> @@ -11,17 +11,6 @@
>  #include <misc/cxl.h>
>  #include "cxl.h"
>  
> -static int cxl_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
> -{
> -	if (dma_mask < DMA_BIT_MASK(64)) {
> -		pr_info("%s only 64bit DMA supported on CXL", __func__);
> -		return -EIO;
> -	}
> -
> -	*(pdev->dev.dma_mask) = dma_mask;
> -	return 0;
> -}
> -
>  static int cxl_pci_probe_mode(struct pci_bus *bus)
>  {
>  	return PCI_PROBE_NORMAL;
> @@ -220,7 +209,6 @@ static struct pci_controller_ops cxl_pci_controller_ops =
>  	.reset_secondary_bus = cxl_pci_reset_secondary_bus,
>  	.setup_msi_irqs = cxl_setup_msi_irqs,
>  	.teardown_msi_irqs = cxl_teardown_msi_irqs,
> -	.dma_set_mask = cxl_dma_set_mask,
>  };
>  
>  int cxl_pci_vphb_add(struct cxl_afu *afu)
> -- 
> 2.19.1
> 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 14/34] powerpc/dart: remove dead cleanup code in iommu_init_early_dart
  2018-11-14  8:22 ` [PATCH 14/34] powerpc/dart: remove dead cleanup code in iommu_init_early_dart Christoph Hellwig
@ 2018-12-06 14:11   ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-06 14:11 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
	linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

ping?

On Wed, Nov 14, 2018 at 09:22:54AM +0100, Christoph Hellwig wrote:
> If dart_init failed we didn't have a chance to setup dma or controller
> ops yet, so there is no point in resetting them.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  arch/powerpc/sysdev/dart_iommu.c | 11 +----------
>  1 file changed, 1 insertion(+), 10 deletions(-)
> 
> diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
> index a5b40d1460f1..283ce04c5844 100644
> --- a/arch/powerpc/sysdev/dart_iommu.c
> +++ b/arch/powerpc/sysdev/dart_iommu.c
> @@ -428,7 +428,7 @@ void __init iommu_init_early_dart(struct pci_controller_ops *controller_ops)
>  
>  	/* Initialize the DART HW */
>  	if (dart_init(dn) != 0)
> -		goto bail;
> +		return;
>  
>  	/* Setup bypass if supported */
>  	if (dart_is_u4)
> @@ -439,15 +439,6 @@ void __init iommu_init_early_dart(struct pci_controller_ops *controller_ops)
>  
>  	/* Setup pci_dma ops */
>  	set_pci_dma_ops(&dma_iommu_ops);
> -	return;
> -
> - bail:
> -	/* If init failed, use direct iommu and null setup functions */
> -	controller_ops->dma_dev_setup = NULL;
> -	controller_ops->dma_bus_setup = NULL;
> -
> -	/* Setup pci_dma ops */
> -	set_pci_dma_ops(&dma_nommu_ops);
>  }
>  
>  #ifdef CONFIG_PM
> -- 
> 2.19.1
> 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-06 10:55                             ` Christian Zigotzky
@ 2018-12-06 17:10                               ` Christian Zigotzky
  2018-12-06 19:36                                 ` Christoph Hellwig
  2018-12-07 13:45                               ` Christian Zigotzky
  1 sibling, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-06 17:10 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Please don’t merge this code. We are still testing and trying to figure out where the problems are in the code.

— Christian

Sent from my iPhone

> On 6. Dec 2018, at 11:55, Christian Zigotzky <chzigotzky@xenosoft.de> wrote:
> 
>> On 05 December 2018 at 3:05PM, Christoph Hellwig wrote:
>> 
>> Thanks.  Can you try a few stepping points in the tree?
>> 
>> First just with commit 7fd3bb05b73beea1f9840b505aa09beb9c75a8c6
>> (the first one) applied?
>> 
>> Second with all commits up to 5da11e49df21f21dac25a2491aa788307bdacb6b
>> 
>> And if that still works with commits up to
>> c1bfcad4b0cf38ce5b00f7ad880d3a13484c123a
>> 
> Hi Christoph,
> 
> I undid the commit 7fd3bb05b73beea1f9840b505aa09beb9c75a8c6 with the following command:
> 
> git checkout 7fd3bb05b73beea1f9840b505aa09beb9c75a8c6
> 
> Result: PASEMI onboard ethernet works again and the P5020 board boots.
> 
> I will test the other commits in the next days.
> 
> @All
> It is really important, that you also test Christoph's work on your PASEMI and NXP boards. Could you please help us with solving the issues?
> 
> 'git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.5 a'
> 
> Thanks,
> Christian
> 

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-06 17:10                               ` Christian Zigotzky
@ 2018-12-06 19:36                                 ` Christoph Hellwig
  2018-12-07  7:48                                   ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-06 19:36 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Thu, Dec 06, 2018 at 06:10:54PM +0100, Christian Zigotzky wrote:
> Please don’t merge this code. We are still testing and trying to figure out where the problems are in the code.

The ones I sent pings for were either tested successfully by you
(the zone change) or are trivial cleanups that don't affect your setup.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-06 19:36                                 ` Christoph Hellwig
@ 2018-12-07  7:48                                   ` Christian Zigotzky
  0 siblings, 0 replies; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-07  7:48 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Good to know. Sorry because of the email.

Sent from my iPhone

> On 6. Dec 2018, at 20:36, Christoph Hellwig <hch@lst.de> wrote:
> 
>> On Thu, Dec 06, 2018 at 06:10:54PM +0100, Christian Zigotzky wrote:
>> Please don’t merge this code. We are still testing and trying to figure out where the problems are in the code.
> 
> The ones I sent pings for were either tested successfully by you
> (the zone change) or are trivial cleanups that don't affect your setup.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 01/34] powerpc: use mm zones more sensibly
  2018-12-06 14:09   ` Christoph Hellwig
@ 2018-12-07 12:18     ` Michael Ellerman
  2018-12-07 14:09       ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Michael Ellerman @ 2018-12-07 12:18 UTC (permalink / raw)
  To: Christoph Hellwig, Christoph Hellwig
  Cc: Benjamin Herrenschmidt, Paul Mackerras, linux-arch, linux-mm,
	iommu, linuxppc-dev, linux-kernel

Christoph Hellwig <hch@infradead.org> writes:

> Ben / Michael,
>
> can we get this one queued up for 4.21 to prepare for the DMA work later
> on?

I was hoping the PASEMI / NXP regressions could be solved before
merging.

My p5020ds is booting fine with this series, so I'm not sure why it's
causing problems on Christian's machine.

The last time I turned on my PASEMI board it tripped some breakers, so I
need to investigate that before I can help test that.

I'll see how things look on Monday and either merge the commits you
identified or the whole series depending on if there's any more info
from Christian.

cheers

> On Wed, Nov 14, 2018 at 09:22:41AM +0100, Christoph Hellwig wrote:
>> Powerpc has somewhat odd usage where ZONE_DMA is used for all memory on
>> common 64-bit configfs, and ZONE_DMA32 is used for 31-bit schemes.
>> 
>> Move to a scheme closer to what other architectures use (and I dare to
>> say the intent of the system):
>> 
>>  - ZONE_DMA: optionally for memory < 31-bit (64-bit embedded only)
>>  - ZONE_NORMAL: everything addressable by the kernel
>>  - ZONE_HIGHMEM: memory > 32-bit for 32-bit kernels
>> 
>> Also provide information on how ZONE_DMA is used by defining
>> ARCH_ZONE_DMA_BITS.
>> 
>> Contains various fixes from Benjamin Herrenschmidt.
>> 
>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>> ---
>>  arch/powerpc/Kconfig                          |  8 +---
>>  arch/powerpc/include/asm/page.h               |  2 +
>>  arch/powerpc/include/asm/pgtable.h            |  1 -
>>  arch/powerpc/kernel/dma-swiotlb.c             |  6 +--
>>  arch/powerpc/kernel/dma.c                     |  7 +--
>>  arch/powerpc/mm/mem.c                         | 47 +++++++------------
>>  arch/powerpc/platforms/85xx/corenet_generic.c | 10 ----
>>  arch/powerpc/platforms/85xx/qemu_e500.c       |  9 ----
>>  include/linux/mmzone.h                        |  2 +-
>>  9 files changed, 25 insertions(+), 67 deletions(-)
>> 
>> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
>> index 8be31261aec8..cffff3613bc1 100644
>> --- a/arch/powerpc/Kconfig
>> +++ b/arch/powerpc/Kconfig
>> @@ -374,9 +374,9 @@ config PPC_ADV_DEBUG_DAC_RANGE
>>  	depends on PPC_ADV_DEBUG_REGS && 44x
>>  	default y
>>  
>> -config ZONE_DMA32
>> +config ZONE_DMA
>>  	bool
>> -	default y if PPC64
>> +	default y if PPC_BOOK3E_64
>>  
>>  config PGTABLE_LEVELS
>>  	int
>> @@ -869,10 +869,6 @@ config ISA
>>  	  have an IBM RS/6000 or pSeries machine, say Y.  If you have an
>>  	  embedded board, consult your board documentation.
>>  
>> -config ZONE_DMA
>> -	bool
>> -	default y
>> -
>>  config GENERIC_ISA_DMA
>>  	bool
>>  	depends on ISA_DMA_API
>> diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
>> index f6a1265face2..fc8c9ac0c6be 100644
>> --- a/arch/powerpc/include/asm/page.h
>> +++ b/arch/powerpc/include/asm/page.h
>> @@ -354,4 +354,6 @@ typedef struct page *pgtable_t;
>>  #endif /* __ASSEMBLY__ */
>>  #include <asm/slice.h>
>>  
>> +#define ARCH_ZONE_DMA_BITS 31
>> +
>>  #endif /* _ASM_POWERPC_PAGE_H */
>> diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
>> index 9679b7519a35..8af32ce93c7f 100644
>> --- a/arch/powerpc/include/asm/pgtable.h
>> +++ b/arch/powerpc/include/asm/pgtable.h
>> @@ -66,7 +66,6 @@ extern unsigned long empty_zero_page[];
>>  
>>  extern pgd_t swapper_pg_dir[];
>>  
>> -void limit_zone_pfn(enum zone_type zone, unsigned long max_pfn);
>>  int dma_pfn_limit_to_zone(u64 pfn_limit);
>>  extern void paging_init(void);
>>  
>> diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
>> index 5fc335f4d9cd..678811abccfc 100644
>> --- a/arch/powerpc/kernel/dma-swiotlb.c
>> +++ b/arch/powerpc/kernel/dma-swiotlb.c
>> @@ -108,12 +108,8 @@ int __init swiotlb_setup_bus_notifier(void)
>>  
>>  void __init swiotlb_detect_4g(void)
>>  {
>> -	if ((memblock_end_of_DRAM() - 1) > 0xffffffff) {
>> +	if ((memblock_end_of_DRAM() - 1) > 0xffffffff)
>>  		ppc_swiotlb_enable = 1;
>> -#ifdef CONFIG_ZONE_DMA32
>> -		limit_zone_pfn(ZONE_DMA32, (1ULL << 32) >> PAGE_SHIFT);
>> -#endif
>> -	}
>>  }
>>  
>>  static int __init check_swiotlb_enabled(void)
>> diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
>> index dbfc7056d7df..6551685a4ed0 100644
>> --- a/arch/powerpc/kernel/dma.c
>> +++ b/arch/powerpc/kernel/dma.c
>> @@ -50,7 +50,7 @@ static int dma_nommu_dma_supported(struct device *dev, u64 mask)
>>  		return 1;
>>  
>>  #ifdef CONFIG_FSL_SOC
>> -	/* Freescale gets another chance via ZONE_DMA/ZONE_DMA32, however
>> +	/* Freescale gets another chance via ZONE_DMA, however
>>  	 * that will have to be refined if/when they support iommus
>>  	 */
>>  	return 1;
>> @@ -94,13 +94,10 @@ void *__dma_nommu_alloc_coherent(struct device *dev, size_t size,
>>  	}
>>  
>>  	switch (zone) {
>> +#ifdef CONFIG_ZONE_DMA
>>  	case ZONE_DMA:
>>  		flag |= GFP_DMA;
>>  		break;
>> -#ifdef CONFIG_ZONE_DMA32
>> -	case ZONE_DMA32:
>> -		flag |= GFP_DMA32;
>> -		break;
>>  #endif
>>  	};
>>  #endif /* CONFIG_FSL_SOC */
>> diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
>> index 0a64fffabee1..c0b676c3a5ba 100644
>> --- a/arch/powerpc/mm/mem.c
>> +++ b/arch/powerpc/mm/mem.c
>> @@ -246,35 +246,19 @@ static int __init mark_nonram_nosave(void)
>>  }
>>  #endif
>>  
>> -static bool zone_limits_final;
>> -
>>  /*
>> - * The memory zones past TOP_ZONE are managed by generic mm code.
>> - * These should be set to zero since that's what every other
>> - * architecture does.
>> + * Zones usage:
>> + *
>> + * We setup ZONE_DMA to be 31-bits on all platforms and ZONE_NORMAL to be
>> + * everything else. GFP_DMA32 page allocations automatically fall back to
>> + * ZONE_DMA.
>> + *
>> + * By using 31-bit unconditionally, we can exploit ARCH_ZONE_DMA_BITS to
>> + * inform the generic DMA mapping code.  32-bit only devices (if not handled
>> + * by an IOMMU anyway) will take a first dip into ZONE_NORMAL and get
>> + * otherwise served by ZONE_DMA.
>>   */
>> -static unsigned long max_zone_pfns[MAX_NR_ZONES] = {
>> -	[0            ... TOP_ZONE        ] = ~0UL,
>> -	[TOP_ZONE + 1 ... MAX_NR_ZONES - 1] = 0
>> -};
>> -
>> -/*
>> - * Restrict the specified zone and all more restrictive zones
>> - * to be below the specified pfn.  May not be called after
>> - * paging_init().
>> - */
>> -void __init limit_zone_pfn(enum zone_type zone, unsigned long pfn_limit)
>> -{
>> -	int i;
>> -
>> -	if (WARN_ON(zone_limits_final))
>> -		return;
>> -
>> -	for (i = zone; i >= 0; i--) {
>> -		if (max_zone_pfns[i] > pfn_limit)
>> -			max_zone_pfns[i] = pfn_limit;
>> -	}
>> -}
>> +static unsigned long max_zone_pfns[MAX_NR_ZONES];
>>  
>>  /*
>>   * Find the least restrictive zone that is entirely below the
>> @@ -324,11 +308,14 @@ void __init paging_init(void)
>>  	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
>>  	       (long int)((top_of_ram - total_ram) >> 20));
>>  
>> +#ifdef CONFIG_ZONE_DMA
>> +	max_zone_pfns[ZONE_DMA]	= min(max_low_pfn, 0x7fffffffUL >> PAGE_SHIFT);
>> +#endif
>> +	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
>>  #ifdef CONFIG_HIGHMEM
>> -	limit_zone_pfn(ZONE_NORMAL, lowmem_end_addr >> PAGE_SHIFT);
>> +	max_zone_pfns[ZONE_HIGHMEM] = max_pfn;
>>  #endif
>> -	limit_zone_pfn(TOP_ZONE, top_of_ram >> PAGE_SHIFT);
>> -	zone_limits_final = true;
>> +
>>  	free_area_init_nodes(max_zone_pfns);
>>  
>>  	mark_nonram_nosave();
>> diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
>> index ac191a7a1337..b0dac307bebf 100644
>> --- a/arch/powerpc/platforms/85xx/corenet_generic.c
>> +++ b/arch/powerpc/platforms/85xx/corenet_generic.c
>> @@ -68,16 +68,6 @@ void __init corenet_gen_setup_arch(void)
>>  
>>  	swiotlb_detect_4g();
>>  
>> -#if defined(CONFIG_FSL_PCI) && defined(CONFIG_ZONE_DMA32)
>> -	/*
>> -	 * Inbound windows don't cover the full lower 4 GiB
>> -	 * due to conflicts with PCICSRBAR and outbound windows,
>> -	 * so limit the DMA32 zone to 2 GiB, to allow consistent
>> -	 * allocations to succeed.
>> -	 */
>> -	limit_zone_pfn(ZONE_DMA32, 1UL << (31 - PAGE_SHIFT));
>> -#endif
>> -
>>  	pr_info("%s board\n", ppc_md.name);
>>  
>>  	mpc85xx_qe_init();
>> diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c
>> index b63a8548366f..27631c607f3d 100644
>> --- a/arch/powerpc/platforms/85xx/qemu_e500.c
>> +++ b/arch/powerpc/platforms/85xx/qemu_e500.c
>> @@ -45,15 +45,6 @@ static void __init qemu_e500_setup_arch(void)
>>  
>>  	fsl_pci_assign_primary();
>>  	swiotlb_detect_4g();
>> -#if defined(CONFIG_FSL_PCI) && defined(CONFIG_ZONE_DMA32)
>> -	/*
>> -	 * Inbound windows don't cover the full lower 4 GiB
>> -	 * due to conflicts with PCICSRBAR and outbound windows,
>> -	 * so limit the DMA32 zone to 2 GiB, to allow consistent
>> -	 * allocations to succeed.
>> -	 */
>> -	limit_zone_pfn(ZONE_DMA32, 1UL << (31 - PAGE_SHIFT));
>> -#endif
>>  	mpc85xx_smp_init();
>>  }
>>  
>> diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
>> index 847705a6d0ec..e2d01ccd071d 100644
>> --- a/include/linux/mmzone.h
>> +++ b/include/linux/mmzone.h
>> @@ -314,7 +314,7 @@ enum zone_type {
>>  	 * Architecture		Limit
>>  	 * ---------------------------
>>  	 * parisc, ia64, sparc	<4G
>> -	 * s390			<2G
>> +	 * s390, powerpc	<2G
>>  	 * arm			Various
>>  	 * alpha		Unlimited or 0-16MB.
>>  	 *
>> -- 
>> 2.19.1
>> 
>> _______________________________________________
>> iommu mailing list
>> iommu@lists.linux-foundation.org
>> https://lists.linuxfoundation.org/mailman/listinfo/iommu
> ---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-06 10:55                             ` Christian Zigotzky
  2018-12-06 17:10                               ` Christian Zigotzky
@ 2018-12-07 13:45                               ` Christian Zigotzky
  2018-12-07 18:33                                 ` Christian Zigotzky
  1 sibling, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-07 13:45 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 06 December 2018 at 11:55AM, Christian Zigotzky wrote:
> On 05 December 2018 at 3:05PM, Christoph Hellwig wrote:
>>
>> Thanks.  Can you try a few stepping points in the tree?
>>
>> First just with commit 7fd3bb05b73beea1f9840b505aa09beb9c75a8c6
>> (the first one) applied?
>>
>> Second with all commits up to 5da11e49df21f21dac25a2491aa788307bdacb6b
>>
>> And if that still works with commits up to
>> c1bfcad4b0cf38ce5b00f7ad880d3a13484c123a
>>
> Hi Christoph,
>
> I undid the commit 7fd3bb05b73beea1f9840b505aa09beb9c75a8c6 with the 
> following command:
>
> git checkout 7fd3bb05b73beea1f9840b505aa09beb9c75a8c6
>
> Result: PASEMI onboard ethernet works again and the P5020 board boots.
>
> I will test the other commits in the next days.
>
> @All
> It is really important, that you also test Christoph's work on your 
> PASEMI and NXP boards. Could you please help us with solving the issues?
>
> 'git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.5 a'
>
> Thanks,
> Christian
>
>
Today I tested the commit 5da11e49df21f21dac25a2491aa788307bdacb6b.

git checkout 5da11e49df21f21dac25a2491aa788307bdacb6b

The PASEMI onboard ethernet works and the P5020 board boots.

-- Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 01/34] powerpc: use mm zones more sensibly
  2018-12-07 12:18     ` Michael Ellerman
@ 2018-12-07 14:09       ` Christoph Hellwig
  2018-12-07 15:04         ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-07 14:09 UTC (permalink / raw)
  To: Michael Ellerman
  Cc: Christoph Hellwig, Christoph Hellwig, Benjamin Herrenschmidt,
	Paul Mackerras, linux-arch, linux-mm, iommu, linuxppc-dev,
	linux-kernel

On Fri, Dec 07, 2018 at 11:18:18PM +1100, Michael Ellerman wrote:
> Christoph Hellwig <hch@infradead.org> writes:
> 
> > Ben / Michael,
> >
> > can we get this one queued up for 4.21 to prepare for the DMA work later
> > on?
> 
> I was hoping the PASEMI / NXP regressions could be solved before
> merging.
> 
> My p5020ds is booting fine with this series, so I'm not sure why it's
> causing problems on Christian's machine.
> 
> The last time I turned on my PASEMI board it tripped some breakers, so I
> need to investigate that before I can help test that.
> 
> I'll see how things look on Monday and either merge the commits you
> identified or the whole series depending on if there's any more info
> from Christian.

Christian just confirmed everything up to at least
"powerpc/dma: stop overriding dma_get_required_mask" works for his
setups.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 01/34] powerpc: use mm zones more sensibly
  2018-12-07 14:09       ` Christoph Hellwig
@ 2018-12-07 15:04         ` Christian Zigotzky
  0 siblings, 0 replies; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-07 15:04 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Michael Ellerman, linux-arch, linux-kernel, Christoph Hellwig,
	linux-mm, iommu, Paul Mackerras, linuxppc-dev

I will work at the weekend to figure out where the problematic commit is.

— Christian

Sent from my iPhone

> On 7. Dec 2018, at 15:09, Christoph Hellwig <hch@lst.de> wrote:
> 
>> On Fri, Dec 07, 2018 at 11:18:18PM +1100, Michael Ellerman wrote:
>> Christoph Hellwig <hch@infradead.org> writes:
>> 
>>> Ben / Michael,
>>> 
>>> can we get this one queued up for 4.21 to prepare for the DMA work later
>>> on?
>> 
>> I was hoping the PASEMI / NXP regressions could be solved before
>> merging.
>> 
>> My p5020ds is booting fine with this series, so I'm not sure why it's
>> causing problems on Christian's machine.
>> 
>> The last time I turned on my PASEMI board it tripped some breakers, so I
>> need to investigate that before I can help test that.
>> 
>> I'll see how things look on Monday and either merge the commits you
>> identified or the whole series depending on if there's any more info
>> from Christian.
> 
> Christian just confirmed everything up to at least
> "powerpc/dma: stop overriding dma_get_required_mask" works for his
> setups.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-07 13:45                               ` Christian Zigotzky
@ 2018-12-07 18:33                                 ` Christian Zigotzky
  2018-12-08 10:29                                   ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-07 18:33 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: 13c1fdec5682b6e13257277fa16aa31f342d167d (powerpc/dma: move pci_dma_dev_setup_swiotlb to fsl_pci.c)

git checkout 13c1fdec5682b6e13257277fa16aa31f342d167d

Result: The PASEMI onboard ethernet works and the X5000 boots.

— Christian

Sent from my iPhone

> On 7. Dec 2018, at 14:45, Christian Zigotzky <chzigotzky@xenosoft.de> wrote:
> 
>> On 06 December 2018 at 11:55AM, Christian Zigotzky wrote:
>>> On 05 December 2018 at 3:05PM, Christoph Hellwig wrote:
>>> 
>>> Thanks.  Can you try a few stepping points in the tree?
>>> 
>>> First just with commit 7fd3bb05b73beea1f9840b505aa09beb9c75a8c6
>>> (the first one) applied?
>>> 
>>> Second with all commits up to 5da11e49df21f21dac25a2491aa788307bdacb6b
>>> 
>>> And if that still works with commits up to
>>> c1bfcad4b0cf38ce5b00f7ad880d3a13484c123a
>>> 
>> Hi Christoph,
>> 
>> I undid the commit 7fd3bb05b73beea1f9840b505aa09beb9c75a8c6 with the following command:
>> 
>> git checkout 7fd3bb05b73beea1f9840b505aa09beb9c75a8c6
>> 
>> Result: PASEMI onboard ethernet works again and the P5020 board boots.
>> 
>> I will test the other commits in the next days.
>> 
>> @All
>> It is really important, that you also test Christoph's work on your PASEMI and NXP boards. Could you please help us with solving the issues?
>> 
>> 'git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.5 a'
>> 
>> Thanks,
>> Christian
>> 
>> 
> Today I tested the commit 5da11e49df21f21dac25a2491aa788307bdacb6b.
> 
> git checkout 5da11e49df21f21dac25a2491aa788307bdacb6b
> 
> The PASEMI onboard ethernet works and the P5020 board boots.
> 
> -- Christian
> 

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-07 18:33                                 ` Christian Zigotzky
@ 2018-12-08 10:29                                   ` Christian Zigotzky
  2018-12-08 13:47                                     ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-08 10:29 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: 7ebc44c535f6bd726d553756d38b137acc718443 (powerpc/dma: remove 
max_direct_dma_addr)

git checkout 7ebc44c535f6bd726d553756d38b137acc718443

OK, the PASEMI onboard ethernet works and the P5020 board boots.

-- Christian


On 07 December 2018 at 7:33PM, Christian Zigotzky wrote:
> Next step: 13c1fdec5682b6e13257277fa16aa31f342d167d (powerpc/dma: move pci_dma_dev_setup_swiotlb to fsl_pci.c)
>
> git checkout 13c1fdec5682b6e13257277fa16aa31f342d167d
>
> Result: The PASEMI onboard ethernet works and the P5020 board boots.
>
> — Christian



^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-08 10:29                                   ` Christian Zigotzky
@ 2018-12-08 13:47                                     ` Christian Zigotzky
  2018-12-09 14:20                                       ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-08 13:47 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: e15cd8173ef85e9cc3e2a9c7cc2982f5c1355615 (powerpc/dma: fix an 
off-by-one in dma_capable)

git checkout e15cd8173ef85e9cc3e2a9c7cc2982f5c1355615

The PASEMI onboard ethernet also works with this commit and the X5000 
boots without any problems.

-- Christian


On 08 December 2018 at 11:29AM, Christian Zigotzky wrote:
> Next step: 7ebc44c535f6bd726d553756d38b137acc718443 (powerpc/dma: 
> remove max_direct_dma_addr)
>
> git checkout 7ebc44c535f6bd726d553756d38b137acc718443
>
> OK, the PASEMI onboard ethernet works and the P5020 board boots.
>
> -- Christian
>
>
> On 07 December 2018 at 7:33PM, Christian Zigotzky wrote:
>> Next step: 13c1fdec5682b6e13257277fa16aa31f342d167d (powerpc/dma: 
>> move pci_dma_dev_setup_swiotlb to fsl_pci.c)
>>
>> git checkout 13c1fdec5682b6e13257277fa16aa31f342d167d
>>
>> Result: The PASEMI onboard ethernet works and the P5020 board boots.
>>
>> — Christian
>
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (34 preceding siblings ...)
  2018-11-27  7:42 ` use generic DMA mapping code in powerpc V4 Christoph Hellwig
@ 2018-12-08 17:03 ` Christoph Hellwig
  2018-12-16 16:51 ` Christoph Hellwig
  36 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-08 17:03 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

Just as a warning:  this series now has some conflicts with the dma
mapping tree due to the ->mapping_error removal, and there might be
some bigger ones if the direct calls for the direct mapping code series
goes ahead.  None of them affect the early part of the series that do
not touch the actual dma_map_ops instances, though.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 12/34] powerpc/cell: move dma direct window setup out of dma_configure
  2018-11-14  8:22 ` [PATCH 12/34] powerpc/cell: move dma direct window setup out of dma_configure Christoph Hellwig
@ 2018-12-09 10:23   ` Michael Ellerman
  2018-12-12 14:36     ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Michael Ellerman @ 2018-12-09 10:23 UTC (permalink / raw)
  To: Christoph Hellwig, Benjamin Herrenschmidt, Paul Mackerras
  Cc: linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Christoph Hellwig <hch@lst.de> writes:

> Configure the dma settings at device setup time, and stop playing games
> with get_pci_dma_ops.  This prepares for using the common dma_configure
> code later on.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  arch/powerpc/platforms/cell/iommu.c | 20 +++++++++++---------
>  1 file changed, 11 insertions(+), 9 deletions(-)

This one's crashing, haven't dug into why yet:

  [    1.347085] Unable to handle kernel paging request for data at address 0x00000040
  [    1.391505] Faulting instruction address: 0xc0000000006b6e6c
  cpu 0x0: Vector: 380 (Data SLB Access) at [c0000007fc9032d0]
  pc: c0000000006b6e6c: .of_n_addr_cells+0x34/0xc0
  lr: c000000000070b30: .cell_iommu_get_fixed_address+0x58/0x2b0
  sp: c0000007fc903560
  msr: 9000000000009032
  dar: 40
  current = 0xc0000007fc8d0000
  paca    = 0xc000000000f60000	 irqmask: 0x03	 irq_happened: 0x01
  pid   = 1, comm = swapper/0
  Linux version 4.20.0-rc2-gcc7x-g1e32f48 (kerkins@p82) (gcc version 7.4.1 20181208 (Custom eb377405ab2d1900)) #1 SMP Sun Dec 9 12:16:48 AEDT 2018
  enter ? for help
  [c0000007fc9035f0] c000000000070b30 .cell_iommu_get_fixed_address+0x58/0x2b0
  [c0000007fc9036c0] c0000000000711ac .cell_dma_dev_setup.part.1+0x24/0x118
  [c0000007fc903740] c000000000071374 .cell_of_bus_notify+0x6c/0xbc
  [c0000007fc9037c0] c0000000000e7ef0 .notifier_call_chain+0x90/0xf8
  [c0000007fc903860] c0000000000e8c2c .blocking_notifier_call_chain+0x84/0xb8
  [c0000007fc9038f0] c000000000597544 .device_add+0x584/0x7b8
  [c0000007fc9039c0] c0000000005a0308 .platform_device_add+0x148/0x2f0
  [c0000007fc903a60] c0000000005a1508 .platform_device_register_full+0x148/0x168
  [c0000007fc903ae0] c000000000a9a8a0 .__machine_initcall_cell_cell_publish_devices+0x1bc/0x210
  [c0000007fc903be0] c00000000000eca4 .do_one_initcall+0x64/0x2d8
  [c0000007fc903cc0] c000000000a844ec .kernel_init_freeable+0x3dc/0x4e4
  [c0000007fc903da0] c00000000000f06c .kernel_init+0x24/0x150
  [c0000007fc903e20] c00000000000a9c0 .ret_from_kernel_thread+0x58/0x78

cheers

> diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
> index 12352a58072a..cce5bf9515e5 100644
> --- a/arch/powerpc/platforms/cell/iommu.c
> +++ b/arch/powerpc/platforms/cell/iommu.c
> @@ -657,14 +657,21 @@ static const struct dma_map_ops dma_iommu_fixed_ops = {
>  	.mapping_error	= dma_iommu_mapping_error,
>  };
>  
> +static u64 cell_iommu_get_fixed_address(struct device *dev);
> +
>  static void cell_dma_dev_setup(struct device *dev)
>  {
> -	if (get_pci_dma_ops() == &dma_iommu_ops)
> +	if (get_pci_dma_ops() == &dma_iommu_ops) {
> +		u64 addr = cell_iommu_get_fixed_address(dev);
> +
> +		if (addr != OF_BAD_ADDR)
> +			set_dma_offset(dev, addr + dma_iommu_fixed_base);
>  		set_iommu_table_base(dev, cell_get_iommu_table(dev));
> -	else if (get_pci_dma_ops() == &dma_nommu_ops)
> +	} else if (get_pci_dma_ops() == &dma_nommu_ops) {
>  		set_dma_offset(dev, cell_dma_nommu_offset);
> -	else
> +	} else {
>  		BUG();
> +	}
>  }
>  
>  static void cell_pci_dma_dev_setup(struct pci_dev *dev)
> @@ -950,19 +957,14 @@ static int dma_suported_and_switch(struct device *dev, u64 dma_mask)
>  {
>  	if (dma_mask == DMA_BIT_MASK(64) &&
>  	    cell_iommu_get_fixed_address(dev) != OF_BAD_ADDR) {
> -		u64 addr = cell_iommu_get_fixed_address(dev) +
> -			dma_iommu_fixed_base;
>  		dev_dbg(dev, "iommu: 64-bit OK, using fixed ops\n");
> -		dev_dbg(dev, "iommu: fixed addr = %llx\n", addr);
>  		set_dma_ops(dev, &dma_iommu_fixed_ops);
> -		set_dma_offset(dev, addr);
>  		return 1;
>  	}
>  
>  	if (dma_iommu_dma_supported(dev, dma_mask)) {
>  		dev_dbg(dev, "iommu: not 64-bit, using default ops\n");
> -		set_dma_ops(dev, get_pci_dma_ops());
> -		cell_dma_dev_setup(dev);
> +		set_dma_ops(dev, &dma_iommu_ops);
>  		return 1;
>  	}
>  
> -- 
> 2.19.1

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-08 13:47                                     ` Christian Zigotzky
@ 2018-12-09 14:20                                       ` Christian Zigotzky
  2018-12-09 18:26                                         ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-09 14:20 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: 602307b034734ce77a05da4b99333a2eaf6b6482 (powerpc/fsl_pci: 
simplify fsl_pci_dma_set_mask)

git checkout 602307b034734ce77a05da4b99333a2eaf6b6482

The PASEMI onboard ethernet works and the X5000 boots.

-- Christian


On 08 December 2018 at 2:47PM, Christian Zigotzky wrote:
> Next step: e15cd8173ef85e9cc3e2a9c7cc2982f5c1355615 (powerpc/dma: fix 
> an off-by-one in dma_capable)
>
> git checkout e15cd8173ef85e9cc3e2a9c7cc2982f5c1355615
>
> The PASEMI onboard ethernet also works with this commit and the X5000 
> boots without any problems.
>
> -- Christian
>
>
> On 08 December 2018 at 11:29AM, Christian Zigotzky wrote:
>> Next step: 7ebc44c535f6bd726d553756d38b137acc718443 (powerpc/dma: 
>> remove max_direct_dma_addr)
>>
>> git checkout 7ebc44c535f6bd726d553756d38b137acc718443
>>
>> OK, the PASEMI onboard ethernet works and the P5020 board boots.
>>
>> -- Christian
>>
>>
>> On 07 December 2018 at 7:33PM, Christian Zigotzky wrote:
>>> Next step: 13c1fdec5682b6e13257277fa16aa31f342d167d (powerpc/dma: 
>>> move pci_dma_dev_setup_swiotlb to fsl_pci.c)
>>>
>>> git checkout 13c1fdec5682b6e13257277fa16aa31f342d167d
>>>
>>> Result: The PASEMI onboard ethernet works and the P5020 board boots.
>>>
>>> — Christian
>>
>>
>>
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-09 14:20                                       ` Christian Zigotzky
@ 2018-12-09 18:26                                         ` Christian Zigotzky
  2018-12-10 15:54                                           ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-09 18:26 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: c1bfcad4b0cf38ce5b00f7ad880d3a13484c123a (dma-mapping, 
powerpc: simplify the arch dma_set_mask override)

Result: No problems with the PASEMI onboard ethernet and with booting 
the X5000 (P5020 board).

-- Christian


On 09 December 2018 at 3:20PM, Christian Zigotzky wrote:
> Next step: 602307b034734ce77a05da4b99333a2eaf6b6482 (powerpc/fsl_pci: 
> simplify fsl_pci_dma_set_mask)
>
> git checkout 602307b034734ce77a05da4b99333a2eaf6b6482
>
> The PASEMI onboard ethernet works and the X5000 boots.
>
> -- Christian
>
>
> On 08 December 2018 at 2:47PM, Christian Zigotzky wrote:
>> Next step: e15cd8173ef85e9cc3e2a9c7cc2982f5c1355615 (powerpc/dma: fix 
>> an off-by-one in dma_capable)
>>
>> git checkout e15cd8173ef85e9cc3e2a9c7cc2982f5c1355615
>>
>> The PASEMI onboard ethernet also works with this commit and the X5000 
>> boots without any problems.
>>
>> -- Christian
>>
>>
>> On 08 December 2018 at 11:29AM, Christian Zigotzky wrote:
>>> Next step: 7ebc44c535f6bd726d553756d38b137acc718443 (powerpc/dma: 
>>> remove max_direct_dma_addr)
>>>
>>> git checkout 7ebc44c535f6bd726d553756d38b137acc718443
>>>
>>> OK, the PASEMI onboard ethernet works and the P5020 board boots.
>>>
>>> -- Christian
>>>
>>>
>>> On 07 December 2018 at 7:33PM, Christian Zigotzky wrote:
>>>> Next step: 13c1fdec5682b6e13257277fa16aa31f342d167d (powerpc/dma: 
>>>> move pci_dma_dev_setup_swiotlb to fsl_pci.c)
>>>>
>>>> git checkout 13c1fdec5682b6e13257277fa16aa31f342d167d
>>>>
>>>> Result: The PASEMI onboard ethernet works and the P5020 board boots.
>>>>
>>>> — Christian
>>>
>>>
>>>
>>
>>
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-09 18:26                                         ` Christian Zigotzky
@ 2018-12-10 15:54                                           ` Christian Zigotzky
  2018-12-11 14:28                                             ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-10 15:54 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: 64ecd2c160bbef31465c4d34efc0f076a2aad4df (powerpc/dma: use 
phys_to_dma instead of get_dma_offset)

The P5020 board boots and the PASEMI onboard ethernet works.

-- Christian


On 09 December 2018 at 7:26PM, Christian Zigotzky wrote:
> Next step: c1bfcad4b0cf38ce5b00f7ad880d3a13484c123a (dma-mapping, 
> powerpc: simplify the arch dma_set_mask override)
>
> Result: No problems with the PASEMI onboard ethernet and with booting 
> the X5000 (P5020 board).
>
> -- Christian
>
>
> On 09 December 2018 at 3:20PM, Christian Zigotzky wrote:
>> Next step: 602307b034734ce77a05da4b99333a2eaf6b6482 (powerpc/fsl_pci: 
>> simplify fsl_pci_dma_set_mask)
>>
>> git checkout 602307b034734ce77a05da4b99333a2eaf6b6482
>>
>> The PASEMI onboard ethernet works and the X5000 boots.
>>
>> -- Christian
>>
>>
>> On 08 December 2018 at 2:47PM, Christian Zigotzky wrote:
>>> Next step: e15cd8173ef85e9cc3e2a9c7cc2982f5c1355615 (powerpc/dma: 
>>> fix an off-by-one in dma_capable)
>>>
>>> git checkout e15cd8173ef85e9cc3e2a9c7cc2982f5c1355615
>>>
>>> The PASEMI onboard ethernet also works with this commit and the 
>>> X5000 boots without any problems.
>>>
>>> -- Christian
>>>
>>>
>>> On 08 December 2018 at 11:29AM, Christian Zigotzky wrote:
>>>> Next step: 7ebc44c535f6bd726d553756d38b137acc718443 (powerpc/dma: 
>>>> remove max_direct_dma_addr)
>>>>
>>>> git checkout 7ebc44c535f6bd726d553756d38b137acc718443
>>>>
>>>> OK, the PASEMI onboard ethernet works and the P5020 board boots.
>>>>
>>>> -- Christian
>>>>
>>>>
>>>> On 07 December 2018 at 7:33PM, Christian Zigotzky wrote:
>>>>> Next step: 13c1fdec5682b6e13257277fa16aa31f342d167d (powerpc/dma: 
>>>>> move pci_dma_dev_setup_swiotlb to fsl_pci.c)
>>>>>
>>>>> git checkout 13c1fdec5682b6e13257277fa16aa31f342d167d
>>>>>
>>>>> Result: The PASEMI onboard ethernet works and the P5020 board boots.
>>>>>
>>>>> — Christian
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-10 15:54                                           ` Christian Zigotzky
@ 2018-12-11 14:28                                             ` Christian Zigotzky
  2018-12-11 18:17                                               ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-11 14:28 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: 977706f9755d2d697aa6f45b4f9f0e07516efeda (powerpc/dma: remove 
dma_nommu_mmap_coherent)

Result: The P5020 board boots and the PASEMI onboard ethernet works.

-- Christian


On 10 December 2018 at 4:54PM, Christian Zigotzky wrote:
> Next step: 64ecd2c160bbef31465c4d34efc0f076a2aad4df (powerpc/dma: use 
> phys_to_dma instead of get_dma_offset)
>
> The P5020 board boots and the PASEMI onboard ethernet works.
>
> -- Christian
>
>
> On 09 December 2018 at 7:26PM, Christian Zigotzky wrote:
>> Next step: c1bfcad4b0cf38ce5b00f7ad880d3a13484c123a (dma-mapping, 
>> powerpc: simplify the arch dma_set_mask override)
>>
>> Result: No problems with the PASEMI onboard ethernet and with booting 
>> the X5000 (P5020 board).
>>
>> -- Christian
>>
>>
>> On 09 December 2018 at 3:20PM, Christian Zigotzky wrote:
>>> Next step: 602307b034734ce77a05da4b99333a2eaf6b6482 
>>> (powerpc/fsl_pci: simplify fsl_pci_dma_set_mask)
>>>
>>> git checkout 602307b034734ce77a05da4b99333a2eaf6b6482
>>>
>>> The PASEMI onboard ethernet works and the X5000 boots.
>>>
>>> -- Christian
>>>
>>>
>>> On 08 December 2018 at 2:47PM, Christian Zigotzky wrote:
>>>> Next step: e15cd8173ef85e9cc3e2a9c7cc2982f5c1355615 (powerpc/dma: 
>>>> fix an off-by-one in dma_capable)
>>>>
>>>> git checkout e15cd8173ef85e9cc3e2a9c7cc2982f5c1355615
>>>>
>>>> The PASEMI onboard ethernet also works with this commit and the 
>>>> X5000 boots without any problems.
>>>>
>>>> -- Christian
>>>>
>>>>
>>>> On 08 December 2018 at 11:29AM, Christian Zigotzky wrote:
>>>>> Next step: 7ebc44c535f6bd726d553756d38b137acc718443 (powerpc/dma: 
>>>>> remove max_direct_dma_addr)
>>>>>
>>>>> git checkout 7ebc44c535f6bd726d553756d38b137acc718443
>>>>>
>>>>> OK, the PASEMI onboard ethernet works and the P5020 board boots.
>>>>>
>>>>> -- Christian
>>>>>
>>>>>
>>>>> On 07 December 2018 at 7:33PM, Christian Zigotzky wrote:
>>>>>> Next step: 13c1fdec5682b6e13257277fa16aa31f342d167d (powerpc/dma: 
>>>>>> move pci_dma_dev_setup_swiotlb to fsl_pci.c)
>>>>>>
>>>>>> git checkout 13c1fdec5682b6e13257277fa16aa31f342d167d
>>>>>>
>>>>>> Result: The PASEMI onboard ethernet works and the P5020 board boots.
>>>>>>
>>>>>> — Christian
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-11 14:28                                             ` Christian Zigotzky
@ 2018-12-11 18:17                                               ` Christian Zigotzky
  2018-12-12  0:47                                                 ` Benjamin Herrenschmidt
  2018-12-12 14:15                                                 ` Christoph Hellwig
  0 siblings, 2 replies; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-11 18:17 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: 7decbcfc656805603ab97206b3f816f26cd2cf7d (powerpc/dma: use 
generic direct and swiotlb ops)

git checkout 7decbcfc656805603ab97206b3f816f26cd2cf7d

We have the bad commit! :-) The PASEMI onboard ethernet doesn't work 
with this commit anymore.

Error messages:

[  367.627623] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.627631] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.627639] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0
[  367.627647] pci 0000:00:1a.0: dma_direct_map_page: overflow 
0x000000026bcb5002+110 of device mask ffffffff bus mask 0

pci 0000:00:1a.0 = 00:1a.0 DMA controller: PA Semi, Inc PWRficient DMA 
Controller (rev 12)

X5000 (P5020 board): U-Boot loads the kernel and the dtb file. Then the 
kernel starts but it doesn't find any hard disks (partitions). That 
means this is also the bad commit for the P5020 board.

Link to the bad commit: 
http://git.infradead.org/users/hch/misc.git/commit/7decbcfc656805603ab97206b3f816f26cd2cf7d

Link to the Git: 
http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.5

The commit before (977706f9755d2d697aa6f45b4f9f0e07516efeda - 
powerpc/dma: remove dma_nommu_mmap_coherent) works without any problems.

-- Christian



^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-11 18:17                                               ` Christian Zigotzky
@ 2018-12-12  0:47                                                 ` Benjamin Herrenschmidt
  2018-12-12  7:03                                                   ` Christian Zigotzky
  2018-12-12 14:15                                                 ` Christoph Hellwig
  1 sibling, 1 reply; 178+ messages in thread
From: Benjamin Herrenschmidt @ 2018-12-12  0:47 UTC (permalink / raw)
  To: Christian Zigotzky, Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On Tue, 2018-12-11 at 19:17 +0100, Christian Zigotzky wrote:
> X5000 (P5020 board): U-Boot loads the kernel and the dtb file. Then the 
> kernel starts but it doesn't find any hard disks (partitions). That 
> means this is also the bad commit for the P5020 board.

What are the disks hanging off ? A PCIe device of some sort ?

Can you send good & bad dmesg logs ?

Ben.



^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-12  0:47                                                 ` Benjamin Herrenschmidt
@ 2018-12-12  7:03                                                   ` Christian Zigotzky
  0 siblings, 0 replies; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-12  7:03 UTC (permalink / raw)
  To: Benjamin Herrenschmidt
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev



> On 12. Dec 2018, at 01:47, Benjamin Herrenschmidt <benh@kernel.crashing.org> wrote:
> 
>> On Tue, 2018-12-11 at 19:17 +0100, Christian Zigotzky wrote:
>> X5000 (P5020 board): U-Boot loads the kernel and the dtb file. Then the 
>> kernel starts but it doesn't find any hard disks (partitions). That 
>> means this is also the bad commit for the P5020 board.
> 
> What are the disks hanging off ? A PCIe device of some sort ?
> 
> Can you send good & bad dmesg logs ?
> 
> Ben.
> 
> 
Unfortunately not. It doesn’t detect any hard disk. That means the kernel ring buffer won’t save to log files. I don’t have a serial null modem cable for seeing all output. We use SATA disks. I will investigate more in this problem with rollback the files in the bad commit.

— Christian




^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-11 18:17                                               ` Christian Zigotzky
  2018-12-12  0:47                                                 ` Benjamin Herrenschmidt
@ 2018-12-12 14:15                                                 ` Christoph Hellwig
  2018-12-12 14:39                                                   ` Christian Zigotzky
  1 sibling, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-12 14:15 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

[-- Attachment #1: Type: text/plain, Size: 322 bytes --]

Thanks for bisecting.  I've spent some time going over the conversion
but can't really pinpoint it.  I have three little patches that switch
parts of the code to the generic version.  This is on top of the
last good commmit (977706f9755d2d697aa6f45b4f9f0e07516efeda).

Can you check with whіch one things stop working?



[-- Attachment #2: 0001-get_required_mask.patch --]
[-- Type: text/x-patch, Size: 775 bytes --]

From 83a4b87de6bc6a75b500c9959de88e2157fbcd7c Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 12 Dec 2018 15:07:49 +0100
Subject: get_required_mask

---
 arch/powerpc/kernel/dma-iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 5b15e53ee43d..2e682004959f 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -152,7 +152,7 @@ u64 dma_iommu_get_required_mask(struct device *dev)
 		return 0;
 
 	if (dev_is_pci(dev)) {
-		u64 bypass_mask = dma_nommu_get_required_mask(dev);
+		u64 bypass_mask = dma_direct_get_required_mask(dev);
 
 		if (dma_iommu_bypass_supported(dev, bypass_mask))
 			return bypass_mask;
-- 
2.19.2


[-- Attachment #3: 0002-swiotlb-dma_supported.patch --]
[-- Type: text/x-patch, Size: 872 bytes --]

From c2579a3619575397929781a14895966cbc1d217b Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 12 Dec 2018 15:08:52 +0100
Subject: swiotlb dma_supported

---
 arch/powerpc/kernel/dma-swiotlb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index aa11625c6691..52ee531c1a0d 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -36,7 +36,7 @@ const struct dma_map_ops powerpc_swiotlb_dma_ops = {
 	.free = __dma_nommu_free_coherent,
 	.map_sg = swiotlb_map_sg_attrs,
 	.unmap_sg = swiotlb_unmap_sg_attrs,
-	.dma_supported = swiotlb_dma_supported,
+	.dma_supported = dma_direct_supported,
 	.map_page = swiotlb_map_page,
 	.unmap_page = swiotlb_unmap_page,
 	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
-- 
2.19.2


[-- Attachment #4: 0003-nommu-dma_supported.patch --]
[-- Type: text/x-patch, Size: 832 bytes --]

From 0105db9e6d8d031b4295116630fd0318fd146737 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 12 Dec 2018 15:10:36 +0100
Subject: nommu dma_supported

---
 arch/powerpc/kernel/dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index a6590aa77181..f53d11d35230 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -179,7 +179,7 @@ const struct dma_map_ops dma_nommu_ops = {
 	.alloc				= __dma_nommu_alloc_coherent,
 	.free				= __dma_nommu_free_coherent,
 	.map_sg				= dma_nommu_map_sg,
-	.dma_supported			= dma_nommu_dma_supported,
+	.dma_supported			= dma_direct_supported,
 	.map_page			= dma_nommu_map_page,
 #ifdef CONFIG_NOT_COHERENT_CACHE
 	.sync_single_for_cpu 		= dma_nommu_sync_single,
-- 
2.19.2


[-- Attachment #5: 0004-alloc-free.patch --]
[-- Type: text/x-patch, Size: 866 bytes --]

From 4c5dd4d4a4b4e63be722fd29ada896c5962072b8 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 12 Dec 2018 15:11:38 +0100
Subject: alloc/free

---
 arch/powerpc/kernel/dma.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index f53d11d35230..d3db6d879559 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -176,8 +176,13 @@ static inline void dma_nommu_sync_single(struct device *dev,
 #endif
 
 const struct dma_map_ops dma_nommu_ops = {
+#ifdef CONFIG_NOT_COHERENT_CACHE
 	.alloc				= __dma_nommu_alloc_coherent,
 	.free				= __dma_nommu_free_coherent,
+#else
+	.alloc				= dma_direct_alloc,
+	.free				= dma_direct_free,
+#endif
 	.map_sg				= dma_nommu_map_sg,
 	.dma_supported			= dma_direct_supported,
 	.map_page			= dma_nommu_map_page,
-- 
2.19.2


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* Re: [PATCH 12/34] powerpc/cell: move dma direct window setup out of dma_configure
  2018-12-09 10:23   ` Michael Ellerman
@ 2018-12-12 14:36     ` Christoph Hellwig
  2018-12-14 13:29       ` Michael Ellerman
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-12 14:36 UTC (permalink / raw)
  To: Michael Ellerman
  Cc: Christoph Hellwig, Benjamin Herrenschmidt, Paul Mackerras,
	linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

On Sun, Dec 09, 2018 at 09:23:39PM +1100, Michael Ellerman wrote:
> Christoph Hellwig <hch@lst.de> writes:
> 
> > Configure the dma settings at device setup time, and stop playing games
> > with get_pci_dma_ops.  This prepares for using the common dma_configure
> > code later on.
> >
> > Signed-off-by: Christoph Hellwig <hch@lst.de>
> > ---
> >  arch/powerpc/platforms/cell/iommu.c | 20 +++++++++++---------
> >  1 file changed, 11 insertions(+), 9 deletions(-)
> 
> This one's crashing, haven't dug into why yet:

Can you provide a gdb assembly of the exact crash site?  This looks
like for some odd reason the DT structures aren't fully setup by the
time we are probing the device, which seems odd.

Either way, something like the patch below would ensure we call
cell_iommu_get_fixed_address from a similar context as before, can you
check if that fixes the issue?

diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 93c7e4aef571..4891b338bf9f 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -569,19 +569,12 @@ static struct iommu_table *cell_get_iommu_table(struct device *dev)
 	return &window->table;
 }
 
-static u64 cell_iommu_get_fixed_address(struct device *dev);
-
 static void cell_dma_dev_setup(struct device *dev)
 {
-	if (cell_iommu_enabled) {
-		u64 addr = cell_iommu_get_fixed_address(dev);
-
-		if (addr != OF_BAD_ADDR)
-			set_dma_offset(dev, addr + dma_iommu_fixed_base);
+	if (cell_iommu_enabled)
 		set_iommu_table_base(dev, cell_get_iommu_table(dev));
-	} else {
+	else
 		set_dma_offset(dev, cell_dma_nommu_offset);
-	}
 }
 
 static void cell_pci_dma_dev_setup(struct pci_dev *dev)
@@ -865,8 +858,16 @@ static u64 cell_iommu_get_fixed_address(struct device *dev)
 
 static bool cell_pci_iommu_bypass_supported(struct pci_dev *pdev, u64 mask)
 {
-	return mask == DMA_BIT_MASK(64) &&
-		cell_iommu_get_fixed_address(&pdev->dev) != OF_BAD_ADDR;
+	if (mask == DMA_BIT_MASK(64)) {
+		u64 addr = cell_iommu_get_fixed_address(&pdev->dev);
+
+		if (addr != OF_BAD_ADDR) {
+			set_dma_offset(&pdev->dev, dma_iommu_fixed_base + addr);
+			return true;
+		}
+	}
+
+	return true;
 }
 
 static void insert_16M_pte(unsigned long addr, unsigned long *ptab,

^ permalink raw reply related	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-12 14:15                                                 ` Christoph Hellwig
@ 2018-12-12 14:39                                                   ` Christian Zigotzky
  2018-12-13  8:41                                                     ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-12 14:39 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hi Christoph,

Thanks a lot for your reply. I will test your patches tomorrow.

Cheers,
Christian

Sent from my iPhone

> On 12. Dec 2018, at 15:15, Christoph Hellwig <hch@lst.de> wrote:
> 
> Thanks for bisecting.  I've spent some time going over the conversion
> but can't really pinpoint it.  I have three little patches that switch
> parts of the code to the generic version.  This is on top of the
> last good commmit (977706f9755d2d697aa6f45b4f9f0e07516efeda).
> 
> Can you check with whіch one things stop working?
> 
> 
> <0001-get_required_mask.patch>
> <0002-swiotlb-dma_supported.patch>
> <0003-nommu-dma_supported.patch>
> <0004-alloc-free.patch>

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-12 14:39                                                   ` Christian Zigotzky
@ 2018-12-13  8:41                                                     ` Christian Zigotzky
  2018-12-13  9:10                                                       ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-13  8:41 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 12 December 2018 at 3:39PM, Christian Zigotzky wrote:
> Hi Christoph,
>
> Thanks a lot for your reply. I will test your patches tomorrow.
>
> Cheers,
> Christian
>
> Sent from my iPhone
>
>> On 12. Dec 2018, at 15:15, Christoph Hellwig <hch@lst.de> wrote:
>>
>> Thanks for bisecting.  I've spent some time going over the conversion
>> but can't really pinpoint it.  I have three little patches that switch
>> parts of the code to the generic version.  This is on top of the
>> last good commmit (977706f9755d2d697aa6f45b4f9f0e07516efeda).
>>
>> Can you check with whіch one things stop working?
>>
>>
>> <0001-get_required_mask.patch>
>> <0002-swiotlb-dma_supported.patch>
>> <0003-nommu-dma_supported.patch>
>> <0004-alloc-free.patch>

Today I tried the first patch (0001-get_required_mask.patch) with the 
last good commit (977706f9755d2d697aa6f45b4f9f0e07516efeda). 
Unfortunately this patch is already included in the last good commit 
(977706f9755d2d697aa6f45b4f9f0e07516efeda). I will try the next patch.

-- Christian



^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-13  8:41                                                     ` Christian Zigotzky
@ 2018-12-13  9:10                                                       ` Christoph Hellwig
  2018-12-13  9:47                                                         ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-13  9:10 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Thu, Dec 13, 2018 at 09:41:50AM +0100, Christian Zigotzky wrote:
> Today I tried the first patch (0001-get_required_mask.patch) with the last 
> good commit (977706f9755d2d697aa6f45b4f9f0e07516efeda). Unfortunately this 
> patch is already included in the last good commit 
> (977706f9755d2d697aa6f45b4f9f0e07516efeda). I will try the next patch.

Hmm, I don't think this is the case.  This is my local git log output:

commit 83a4b87de6bc6a75b500c9959de88e2157fbcd7c
Author: Christoph Hellwig <hch@lst.de>
Date:   Wed Dec 12 15:07:49 2018 +0100

    get_required_mask

commit 977706f9755d2d697aa6f45b4f9f0e07516efeda
Author: Christoph Hellwig <hch@lst.de>
Date:   Sat Nov 10 22:34:27 2018 +0100

    powerpc/dma: remove dma_nommu_mmap_coherent

I've also pushed a git branch with these out to:

    git://git.infradead.org/users/hch/misc.git powerpc-dma.5-debug

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-13  9:10                                                       ` Christoph Hellwig
@ 2018-12-13  9:47                                                         ` Christian Zigotzky
  2018-12-13 11:19                                                           ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-13  9:47 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 13 December 2018 at 10:10AM, Christoph Hellwig wrote:
> On Thu, Dec 13, 2018 at 09:41:50AM +0100, Christian Zigotzky wrote:
>> Today I tried the first patch (0001-get_required_mask.patch) with the last
>> good commit (977706f9755d2d697aa6f45b4f9f0e07516efeda). Unfortunately this
>> patch is already included in the last good commit
>> (977706f9755d2d697aa6f45b4f9f0e07516efeda). I will try the next patch.
> Hmm, I don't think this is the case.  This is my local git log output:
>
> commit 83a4b87de6bc6a75b500c9959de88e2157fbcd7c
> Author: Christoph Hellwig <hch@lst.de>
> Date:   Wed Dec 12 15:07:49 2018 +0100
>
>      get_required_mask
>
> commit 977706f9755d2d697aa6f45b4f9f0e07516efeda
> Author: Christoph Hellwig <hch@lst.de>
> Date:   Sat Nov 10 22:34:27 2018 +0100
>
>      powerpc/dma: remove dma_nommu_mmap_coherent
>
> I've also pushed a git branch with these out to:
>
>      git://git.infradead.org/users/hch/misc.git powerpc-dma.5-debug
>
Sorry Christioph. I was wrong. The first patch isn't included in the 
last good commit. I will try it again. I can only test beside my main 
work. That means it takes longer.

-- Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-13  9:47                                                         ` Christian Zigotzky
@ 2018-12-13 11:19                                                           ` Christian Zigotzky
  2018-12-13 11:25                                                             ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-13 11:19 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 13 December 2018 at 10:47AM, Christian Zigotzky wrote:
> On 13 December 2018 at 10:10AM, Christoph Hellwig wrote:
>> On Thu, Dec 13, 2018 at 09:41:50AM +0100, Christian Zigotzky wrote:
>>> Today I tried the first patch (0001-get_required_mask.patch) with 
>>> the last
>>> good commit (977706f9755d2d697aa6f45b4f9f0e07516efeda). 
>>> Unfortunately this
>>> patch is already included in the last good commit
>>> (977706f9755d2d697aa6f45b4f9f0e07516efeda). I will try the next patch.
>> Hmm, I don't think this is the case.  This is my local git log output:
>>
>> commit 83a4b87de6bc6a75b500c9959de88e2157fbcd7c
>> Author: Christoph Hellwig <hch@lst.de>
>> Date:   Wed Dec 12 15:07:49 2018 +0100
>>
>>      get_required_mask
>>
>> commit 977706f9755d2d697aa6f45b4f9f0e07516efeda
>> Author: Christoph Hellwig <hch@lst.de>
>> Date:   Sat Nov 10 22:34:27 2018 +0100
>>
>>      powerpc/dma: remove dma_nommu_mmap_coherent
>>
>> I've also pushed a git branch with these out to:
>>
>>      git://git.infradead.org/users/hch/misc.git powerpc-dma.5-debug
>>
> Sorry Christioph. I was wrong. The first patch isn't included in the 
> last good commit. I will try it again. I can only test beside my main 
> work. That means it takes longer.
>
> -- Christian
>
>
I tried it again but I get the following error message:

MODPOST vmlinux.o
arch/powerpc/kernel/dma-iommu.o: In function `.dma_iommu_get_required_mask':
(.text+0x274): undefined reference to `.dma_direct_get_required_mask'
make: *** [vmlinux] Error 1


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-13 11:19                                                           ` Christian Zigotzky
@ 2018-12-13 11:25                                                             ` Christoph Hellwig
  2018-12-13 13:34                                                               ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-13 11:25 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Thu, Dec 13, 2018 at 12:19:26PM +0100, Christian Zigotzky wrote:
> I tried it again but I get the following error message:
>
> MODPOST vmlinux.o
> arch/powerpc/kernel/dma-iommu.o: In function `.dma_iommu_get_required_mask':
> (.text+0x274): undefined reference to `.dma_direct_get_required_mask'
> make: *** [vmlinux] Error 1

Sorry, you need this one liner before all the patches posted last time:

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d8819e3a1eb1..7e78c2798f2f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -154,6 +154,7 @@ config PPC
 	select CLONE_BACKWARDS
 	select DCACHE_WORD_ACCESS		if PPC64 && CPU_LITTLE_ENDIAN
 	select DYNAMIC_FTRACE			if FUNCTION_TRACER
+	select DMA_DIRECT_OPS
 	select EDAC_ATOMIC_SCRUB
 	select EDAC_SUPPORT
 	select GENERIC_ATOMIC64			if PPC32

^ permalink raw reply related	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-13 11:25                                                             ` Christoph Hellwig
@ 2018-12-13 13:34                                                               ` Christian Zigotzky
  2018-12-13 17:48                                                                 ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-13 13:34 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 13 December 2018 at 12:25PM, Christoph Hellwig wrote:
> On Thu, Dec 13, 2018 at 12:19:26PM +0100, Christian Zigotzky wrote:
>> I tried it again but I get the following error message:
>>
>> MODPOST vmlinux.o
>> arch/powerpc/kernel/dma-iommu.o: In function `.dma_iommu_get_required_mask':
>> (.text+0x274): undefined reference to `.dma_direct_get_required_mask'
>> make: *** [vmlinux] Error 1
> Sorry, you need this one liner before all the patches posted last time:
>
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index d8819e3a1eb1..7e78c2798f2f 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -154,6 +154,7 @@ config PPC
>   	select CLONE_BACKWARDS
>   	select DCACHE_WORD_ACCESS		if PPC64 && CPU_LITTLE_ENDIAN
>   	select DYNAMIC_FTRACE			if FUNCTION_TRACER
> +	select DMA_DIRECT_OPS
>   	select EDAC_ATOMIC_SCRUB
>   	select EDAC_SUPPORT
>   	select GENERIC_ATOMIC64			if PPC32
>
Thanks. Result: PASEMI onboard ethernet works and the X5000 (P5020 
board) boots with the patch '0001-get_required_mask.patch'.

-- Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-13 13:34                                                               ` Christian Zigotzky
@ 2018-12-13 17:48                                                                 ` Christian Zigotzky
  2018-12-13 21:53                                                                   ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-13 17:48 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 13 December 2018 at 2:34PM, Christian Zigotzky wrote:
> On 13 December 2018 at 12:25PM, Christoph Hellwig wrote:
>> On Thu, Dec 13, 2018 at 12:19:26PM +0100, Christian Zigotzky wrote:
>>> I tried it again but I get the following error message:
>>>
>>> MODPOST vmlinux.o
>>> arch/powerpc/kernel/dma-iommu.o: In function 
>>> `.dma_iommu_get_required_mask':
>>> (.text+0x274): undefined reference to `.dma_direct_get_required_mask'
>>> make: *** [vmlinux] Error 1
>> Sorry, you need this one liner before all the patches posted last time:
>>
>> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
>> index d8819e3a1eb1..7e78c2798f2f 100644
>> --- a/arch/powerpc/Kconfig
>> +++ b/arch/powerpc/Kconfig
>> @@ -154,6 +154,7 @@ config PPC
>>       select CLONE_BACKWARDS
>>       select DCACHE_WORD_ACCESS        if PPC64 && CPU_LITTLE_ENDIAN
>>       select DYNAMIC_FTRACE            if FUNCTION_TRACER
>> +    select DMA_DIRECT_OPS
>>       select EDAC_ATOMIC_SCRUB
>>       select EDAC_SUPPORT
>>       select GENERIC_ATOMIC64            if PPC32
>>
> Thanks. Result: PASEMI onboard ethernet works and the X5000 (P5020 
> board) boots with the patch '0001-get_required_mask.patch'.
>
> -- Christian
>
>
Next patch: '0002-swiotlb-dma_supported.patch' for the last good commit 
(977706f9755d2d697aa6f45b4f9f0e07516efeda).

The PASEMI onboard ethernet works and the X5000 (P5020 board) boots.

-- Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-13 17:48                                                                 ` Christian Zigotzky
@ 2018-12-13 21:53                                                                   ` Christian Zigotzky
  2018-12-14 12:00                                                                     ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-13 21:53 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 13 December 2018 at 6:48PM, Christian Zigotzky wrote:
> On 13 December 2018 at 2:34PM, Christian Zigotzky wrote:
>> On 13 December 2018 at 12:25PM, Christoph Hellwig wrote:
>>> On Thu, Dec 13, 2018 at 12:19:26PM +0100, Christian Zigotzky wrote:
>>>> I tried it again but I get the following error message:
>>>>
>>>> MODPOST vmlinux.o
>>>> arch/powerpc/kernel/dma-iommu.o: In function 
>>>> `.dma_iommu_get_required_mask':
>>>> (.text+0x274): undefined reference to `.dma_direct_get_required_mask'
>>>> make: *** [vmlinux] Error 1
>>> Sorry, you need this one liner before all the patches posted last time:
>>>
>>> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
>>> index d8819e3a1eb1..7e78c2798f2f 100644
>>> --- a/arch/powerpc/Kconfig
>>> +++ b/arch/powerpc/Kconfig
>>> @@ -154,6 +154,7 @@ config PPC
>>>       select CLONE_BACKWARDS
>>>       select DCACHE_WORD_ACCESS        if PPC64 && CPU_LITTLE_ENDIAN
>>>       select DYNAMIC_FTRACE            if FUNCTION_TRACER
>>> +    select DMA_DIRECT_OPS
>>>       select EDAC_ATOMIC_SCRUB
>>>       select EDAC_SUPPORT
>>>       select GENERIC_ATOMIC64            if PPC32
>>>
>> Thanks. Result: PASEMI onboard ethernet works and the X5000 (P5020 
>> board) boots with the patch '0001-get_required_mask.patch'.
>>
>> -- Christian
>>
>>
> Next patch: '0002-swiotlb-dma_supported.patch' for the last good 
> commit (977706f9755d2d697aa6f45b4f9f0e07516efeda).
>
> The PASEMI onboard ethernet works and the X5000 (P5020 board) boots.
>
> -- Christian
>
>
Next patch: '0003-nommu-dma_supported.patch'

No problems with the PASEMI onboard ethernet and the P5020 board boots.

-- Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-13 21:53                                                                   ` Christian Zigotzky
@ 2018-12-14 12:00                                                                     ` Christian Zigotzky
  2018-12-14 16:45                                                                       ` Christoph Hellwig
  2019-01-03  7:36                                                                       ` Christoph Hellwig
  0 siblings, 2 replies; 178+ messages in thread
From: Christian Zigotzky @ 2018-12-14 12:00 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 12 December 2018 at 3:15PM, Christoph Hellwig wrote:
 > Thanks for bisecting.  I've spent some time going over the conversion
 > but can't really pinpoint it.  I have three little patches that switch
 > parts of the code to the generic version.  This is on top of the
 > last good commmit (977706f9755d2d697aa6f45b4f9f0e07516efeda).
 >
 > Can you check with whіch one things stop working?

Hello Christoph,

Great news! All your patches work!

I tested all your patches (including the patch '0004-alloc-free.patch' 
today) and the PASEMI onboard ethernet works and the P5020 board boots 
without any problems. Thank you for your work!
I have a few days off. That means, I will work less and only for the 
A-EON first level Linux support. I can test again on Thursday next week.

Have a nice weekend!

Cheers,
Christian

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: [PATCH 12/34] powerpc/cell: move dma direct window setup out of dma_configure
  2018-12-12 14:36     ` Christoph Hellwig
@ 2018-12-14 13:29       ` Michael Ellerman
  2018-12-14 16:42         ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Michael Ellerman @ 2018-12-14 13:29 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Christoph Hellwig, Benjamin Herrenschmidt, Paul Mackerras,
	linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

Christoph Hellwig <hch@lst.de> writes:
> On Sun, Dec 09, 2018 at 09:23:39PM +1100, Michael Ellerman wrote:
>> Christoph Hellwig <hch@lst.de> writes:
>> 
>> > Configure the dma settings at device setup time, and stop playing games
>> > with get_pci_dma_ops.  This prepares for using the common dma_configure
>> > code later on.
>> >
>> > Signed-off-by: Christoph Hellwig <hch@lst.de>
>> > ---
>> >  arch/powerpc/platforms/cell/iommu.c | 20 +++++++++++---------
>> >  1 file changed, 11 insertions(+), 9 deletions(-)
>> 
>> This one's crashing, haven't dug into why yet:
>
> Can you provide a gdb assembly of the exact crash site?  This looks
> like for some odd reason the DT structures aren't fully setup by the
> time we are probing the device, which seems odd.

It's dev->of_node which is NULL.

Because we were passed a platform_device which doesn't have an of_node.

It's the cbe-mic device created in cell_publish_devices().

I can fix that by simply checking for a NULL node, then the system boots
but then I have no network devices, due to:

  tg3 0000:00:01.0: enabling device (0140 -> 0142)
  tg3 0000:00:01.0: DMA engine test failed, aborting
  tg3: probe of 0000:00:01.0 failed with error -12
  tg3 0000:00:01.1: enabling device (0140 -> 0142)
  tg3 0000:00:01.1: DMA engine test failed, aborting
  tg3: probe of 0000:00:01.1 failed with error -12


I think the problem is that we don't want to set iommu_bypass_supported
unless cell_iommu_fixed_mapping_init() succeeds.

Yep. This makes it work for me on cell on top of your v5.

cheers


diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 348a815779c1..8329fda17cc8 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -813,6 +813,10 @@ static u64 cell_iommu_get_fixed_address(struct device *dev)
 	int i, len, best, naddr, nsize, pna, range_size;
 
 	np = of_node_get(dev->of_node);
+	if (!np)
+		/* We can be called for platform devices that have no of_node */
+		goto out;
+
 	while (1) {
 		naddr = of_n_addr_cells(np);
 		nsize = of_n_size_cells(np);
@@ -1065,8 +1069,11 @@ static int __init cell_iommu_init(void)
 	/* Setup various callbacks */
 	cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup;
 
-	if (!iommu_fixed_disabled && cell_iommu_fixed_mapping_init() == 0)
+	if (!iommu_fixed_disabled && cell_iommu_fixed_mapping_init() == 0) {
+		cell_pci_controller_ops.iommu_bypass_supported =
+			cell_pci_iommu_bypass_supported;
 		goto done;
+	}
 
 	/* Create an iommu for each /axon node.  */
 	for_each_node_by_name(np, "axon") {
@@ -1085,10 +1092,6 @@ static int __init cell_iommu_init(void)
 	}
  done:
 	/* Setup default PCI iommu ops */
-	if (!iommu_fixed_disabled) {
-		cell_pci_controller_ops.iommu_bypass_supported =
-				cell_pci_iommu_bypass_supported;
-	}
 	set_pci_dma_ops(&dma_iommu_ops);
 	cell_iommu_enabled = true;
  bail:

^ permalink raw reply related	[flat|nested] 178+ messages in thread

* Re: [PATCH 12/34] powerpc/cell: move dma direct window setup out of dma_configure
  2018-12-14 13:29       ` Michael Ellerman
@ 2018-12-14 16:42         ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-14 16:42 UTC (permalink / raw)
  To: Michael Ellerman
  Cc: Christoph Hellwig, Benjamin Herrenschmidt, Paul Mackerras,
	linuxppc-dev, iommu, linux-mm, linux-arch, linux-kernel

On Sat, Dec 15, 2018 at 12:29:11AM +1100, Michael Ellerman wrote:
> I think the problem is that we don't want to set iommu_bypass_supported
> unless cell_iommu_fixed_mapping_init() succeeds.
> 
> Yep. This makes it work for me on cell on top of your v5.

Thanks, this looks good.  I've folded it with the slight change of moving
the iommu_bypass_supported setup into cell_iommu_fixed_mapping_init.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-14 12:00                                                                     ` Christian Zigotzky
@ 2018-12-14 16:45                                                                       ` Christoph Hellwig
  2019-01-03  7:36                                                                       ` Christoph Hellwig
  1 sibling, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-14 16:45 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Fri, Dec 14, 2018 at 01:00:26PM +0100, Christian Zigotzky wrote:
> On 12 December 2018 at 3:15PM, Christoph Hellwig wrote:
> > Thanks for bisecting.  I've spent some time going over the conversion
> > but can't really pinpoint it.  I have three little patches that switch
> > parts of the code to the generic version.  This is on top of the
> > last good commmit (977706f9755d2d697aa6f45b4f9f0e07516efeda).
> >
> > Can you check with whіch one things stop working?
>
> Hello Christoph,
>
> Great news! All your patches work!

No so great because that means I still have no idea what broke..

> I tested all your patches (including the patch '0004-alloc-free.patch' 
> today) and the PASEMI onboard ethernet works and the P5020 board boots 
> without any problems. Thank you for your work!
> I have a few days off. That means, I will work less and only for the A-EON 
> first level Linux support. I can test again on Thursday next week.

Enjoy your days off!

I think I'll need to prepare something new that is better bisectable,
and use that opportunity to reason about the changes a little more.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
                   ` (35 preceding siblings ...)
  2018-12-08 17:03 ` Christoph Hellwig
@ 2018-12-16 16:51 ` Christoph Hellwig
  2018-12-17  1:14   ` Michael Ellerman
  36 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2018-12-16 16:51 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
  Cc: linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

FYI, given that we are one week before the expected 4.20 release
date and I haven't found the bug plaging Christians setups I think
we need to defer most of this to the next merge window.

I'd still like to get a few bits in earlier, which I will send out
separately now.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-16 16:51 ` Christoph Hellwig
@ 2018-12-17  1:14   ` Michael Ellerman
  0 siblings, 0 replies; 178+ messages in thread
From: Michael Ellerman @ 2018-12-17  1:14 UTC (permalink / raw)
  To: Christoph Hellwig, Benjamin Herrenschmidt, Paul Mackerras
  Cc: linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel

Christoph Hellwig <hch@lst.de> writes:

> FYI, given that we are one week before the expected 4.20 release
> date and I haven't found the bug plaging Christians setups I think
> we need to defer most of this to the next merge window.

OK, sorry I couldn't help. I tried powering up my pasemi board last week
but it just gives me a couple of status leds and nothing else, the fan
never spins up.

> I'd still like to get a few bits in earlier, which I will send out
> separately now.

OK.

cheers

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-12-14 12:00                                                                     ` Christian Zigotzky
  2018-12-14 16:45                                                                       ` Christoph Hellwig
@ 2019-01-03  7:36                                                                       ` Christoph Hellwig
  2019-01-03 19:26                                                                         ` Christian Zigotzky
  1 sibling, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-03  7:36 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

Hi Christian,

happy new year and I hope you had a few restful deays off.

I've pushed a new tree to:

   git://git.infradead.org/users/hch/misc.git powerpc-dma.6

Gitweb:

   http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6

Which has been rebased to the latests Linus tree, which has a lot of
changes, and has also changed the patch split a bit to aid bisection.

I think 

   http://git.infradead.org/users/hch/misc.git/commitdiff/c446404b041130fbd9d1772d184f24715cf2362f

might be a good commit to re-start testing, then bisecting up to the
last commit using git bisect.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-03  7:36                                                                       ` Christoph Hellwig
@ 2019-01-03 19:26                                                                         ` Christian Zigotzky
  2019-01-05 16:03                                                                           ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-03 19:26 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hi Christoph,

Happy new year for you too. Unfortunately we have some problems with the latest DRM patches. They modified a lot and some graphics cards don’t work anymore. During the holidays we tried to figure out where the problems are but without any success.

I will try to test your patches next week.

Cheers,
Christian

Sent from my iPhone

> On 3. Jan 2019, at 08:36, Christoph Hellwig <hch@lst.de> wrote:
> 
> Hi Christian,
> 
> happy new year and I hope you had a few restful deays off.
> 
> I've pushed a new tree to:
> 
>   git://git.infradead.org/users/hch/misc.git powerpc-dma.6
> 
> Gitweb:
> 
>   http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
> 
> Which has been rebased to the latests Linus tree, which has a lot of
> changes, and has also changed the patch split a bit to aid bisection.
> 
> I think 
> 
>   http://git.infradead.org/users/hch/misc.git/commitdiff/c446404b041130fbd9d1772d184f24715cf2362f
> 
> might be a good commit to re-start testing, then bisecting up to the
> last commit using git bisect.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-03 19:26                                                                         ` Christian Zigotzky
@ 2019-01-05 16:03                                                                           ` Christian Zigotzky
  2019-01-09  9:31                                                                             ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-05 16:03 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: c446404b041130fbd9d1772d184f24715cf2362f (powerpc/dma: remove 
dma_nommu_mmap_coherent)

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

git checkout c446404b041130fbd9d1772d184f24715cf2362f

Output:

Note: checking out 'c446404b041130fbd9d1772d184f24715cf2362f'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

   git checkout -b <new-branch-name>

HEAD is now at c446404... powerpc/dma: remove dma_nommu_mmap_coherent

-----

Link to the Git: 
http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6

Result: PASEMI onboard ethernet works and the X5000 (P5020 board) boots.

-- Christian

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-05 16:03                                                                           ` Christian Zigotzky
@ 2019-01-09  9:31                                                                             ` Christian Zigotzky
  2019-01-11  2:10                                                                               ` Christian Zigotzky
  2019-11-05  7:56                                                                               ` Bug 205201 - overflow of DMA mask and bus mask Christian Zigotzky
  0 siblings, 2 replies; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-09  9:31 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: a64e18ba191ba9102fb174f27d707485ffd9389c (powerpc/dma: remove 
dma_nommu_get_required_mask)

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

git checkout a64e18ba191ba9102fb174f27d707485ffd9389c

Link to the Git: 
http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6

Results: PASEMI onboard ethernet works and the X5000 (P5020 board) 
boots. I also successfully tested sound, hardware 3D acceleration, 
Bluetooth, network, booting with a label etc. The uImages work also in a 
virtual e5500 quad-core QEMU machine.

-- Christian


On 05 January 2019 at 5:03PM, Christian Zigotzky wrote:
> Next step: c446404b041130fbd9d1772d184f24715cf2362f (powerpc/dma: 
> remove dma_nommu_mmap_coherent)
>
> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>
> git checkout c446404b041130fbd9d1772d184f24715cf2362f
>
> Output:
>
> Note: checking out 'c446404b041130fbd9d1772d184f24715cf2362f'.
>
> You are in 'detached HEAD' state. You can look around, make experimental
> changes and commit them, and you can discard any commits you make in this
> state without impacting any branches by performing another checkout.
>
> If you want to create a new branch to retain commits you create, you may
> do so (now or later) by using -b with the checkout command again. 
> Example:
>
>   git checkout -b <new-branch-name>
>
> HEAD is now at c446404... powerpc/dma: remove dma_nommu_mmap_coherent
>
> -----
>
> Link to the Git: 
> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>
> Result: PASEMI onboard ethernet works and the X5000 (P5020 board) boots.
>
> -- Christian
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-09  9:31                                                                             ` Christian Zigotzky
@ 2019-01-11  2:10                                                                               ` Christian Zigotzky
  2019-01-12 18:14                                                                                 ` Christian Zigotzky
  2019-11-05  7:56                                                                               ` Bug 205201 - overflow of DMA mask and bus mask Christian Zigotzky
  1 sibling, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-11  2:10 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: 891dcc1072f1fa27a83da920d88daff6ca08fc02 (powerpc/dma: remove 
dma_nommu_dma_supported)

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

git checkout 891dcc1072f1fa27a83da920d88daff6ca08fc02

Output:

Note: checking out '891dcc1072f1fa27a83da920d88daff6ca08fc02'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b <new-branch-name>

HEAD is now at 891dcc1... powerpc/dma: remove dma_nommu_dma_supported

---

Link to the Git: 
http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6

Results: PASEMI onboard ethernet works and the X5000 (P5020 board) 
boots. I also successfully tested sound, hardware 3D acceleration, 
Bluetooth, network, booting with a label etc. The uImages work also in a 
virtual e5500 quad-core QEMU machine.

-- Christian


On 09 January 2019 at 10:31AM, Christian Zigotzky wrote:
> Next step: a64e18ba191ba9102fb174f27d707485ffd9389c (powerpc/dma: 
> remove dma_nommu_get_required_mask)
>
> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>
> git checkout a64e18ba191ba9102fb174f27d707485ffd9389c
>
> Link to the Git: 
> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>
> Results: PASEMI onboard ethernet works and the X5000 (P5020 board) 
> boots. I also successfully tested sound, hardware 3D acceleration, 
> Bluetooth, network, booting with a label etc. The uImages work also in 
> a virtual e5500 quad-core QEMU machine.
>
> -- Christian
>
>
> On 05 January 2019 at 5:03PM, Christian Zigotzky wrote:
>> Next step: c446404b041130fbd9d1772d184f24715cf2362f (powerpc/dma: 
>> remove dma_nommu_mmap_coherent)
>>
>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>
>> git checkout c446404b041130fbd9d1772d184f24715cf2362f
>>
>> Output:
>>
>> Note: checking out 'c446404b041130fbd9d1772d184f24715cf2362f'.
>>
>> You are in 'detached HEAD' state. You can look around, make experimental
>> changes and commit them, and you can discard any commits you make in 
>> this
>> state without impacting any branches by performing another checkout.
>>
>> If you want to create a new branch to retain commits you create, you may
>> do so (now or later) by using -b with the checkout command again. 
>> Example:
>>
>>   git checkout -b <new-branch-name>
>>
>> HEAD is now at c446404... powerpc/dma: remove dma_nommu_mmap_coherent
>>
>> -----
>>
>> Link to the Git: 
>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>
>> Result: PASEMI onboard ethernet works and the X5000 (P5020 board) boots.
>>
>> -- Christian
>>
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-11  2:10                                                                               ` Christian Zigotzky
@ 2019-01-12 18:14                                                                                 ` Christian Zigotzky
  2019-01-15  8:07                                                                                   ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-12 18:14 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39 (swiotlb: remove 
swiotlb_dma_supported)

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

git checkout 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39

Output:

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

   git checkout -b <new-branch-name>

HEAD is now at 4558b6e... swiotlb: remove swiotlb_dma_supported

----

Link to the Git: 
http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6

Results: PASEMI onboard ethernet (X1000) works and the X5000 (P5020 
board) boots. I also successfully tested sound, hardware 3D 
acceleration, Bluetooth, network, booting with a label etc. The uImages 
work also in a virtual e5500 quad-core QEMU machine.

-- Christian


On 11 January 2019 at 03:10AM, Christian Zigotzky wrote:
> Next step: 891dcc1072f1fa27a83da920d88daff6ca08fc02 (powerpc/dma: 
> remove dma_nommu_dma_supported)
>
> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>
> git checkout 891dcc1072f1fa27a83da920d88daff6ca08fc02
>
> Output:
>
> Note: checking out '891dcc1072f1fa27a83da920d88daff6ca08fc02'.
>
> You are in 'detached HEAD' state. You can look around, make experimental
> changes and commit them, and you can discard any commits you make in this
> state without impacting any branches by performing another checkout.
>
> If you want to create a new branch to retain commits you create, you may
> do so (now or later) by using -b with the checkout command again. 
> Example:
>
> git checkout -b <new-branch-name>
>
> HEAD is now at 891dcc1... powerpc/dma: remove dma_nommu_dma_supported
>
> ---
>
> Link to the Git: 
> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>
> Results: PASEMI onboard ethernet works and the X5000 (P5020 board) 
> boots. I also successfully tested sound, hardware 3D acceleration, 
> Bluetooth, network, booting with a label etc. The uImages work also in 
> a virtual e5500 quad-core QEMU machine.
>
> -- Christian
>
>
> On 09 January 2019 at 10:31AM, Christian Zigotzky wrote:
>> Next step: a64e18ba191ba9102fb174f27d707485ffd9389c (powerpc/dma: 
>> remove dma_nommu_get_required_mask)
>>
>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>
>> git checkout a64e18ba191ba9102fb174f27d707485ffd9389c
>>
>> Link to the Git: 
>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>
>> Results: PASEMI onboard ethernet works and the X5000 (P5020 board) 
>> boots. I also successfully tested sound, hardware 3D acceleration, 
>> Bluetooth, network, booting with a label etc. The uImages work also 
>> in a virtual e5500 quad-core QEMU machine.
>>
>> -- Christian
>>
>>
>> On 05 January 2019 at 5:03PM, Christian Zigotzky wrote:
>>> Next step: c446404b041130fbd9d1772d184f24715cf2362f (powerpc/dma: 
>>> remove dma_nommu_mmap_coherent)
>>>
>>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>>
>>> git checkout c446404b041130fbd9d1772d184f24715cf2362f
>>>
>>> Output:
>>>
>>> Note: checking out 'c446404b041130fbd9d1772d184f24715cf2362f'.
>>>
>>> You are in 'detached HEAD' state. You can look around, make 
>>> experimental
>>> changes and commit them, and you can discard any commits you make in 
>>> this
>>> state without impacting any branches by performing another checkout.
>>>
>>> If you want to create a new branch to retain commits you create, you 
>>> may
>>> do so (now or later) by using -b with the checkout command again. 
>>> Example:
>>>
>>>   git checkout -b <new-branch-name>
>>>
>>> HEAD is now at c446404... powerpc/dma: remove dma_nommu_mmap_coherent
>>>
>>> -----
>>>
>>> Link to the Git: 
>>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>>
>>> Result: PASEMI onboard ethernet works and the X5000 (P5020 board) 
>>> boots.
>>>
>>> -- Christian
>>>
>>
>>
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-12 18:14                                                                                 ` Christian Zigotzky
@ 2019-01-15  8:07                                                                                   ` Christian Zigotzky
  2019-01-15  8:49                                                                                     ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-15  8:07 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: 240d7ecd7f6fa62e074e8a835e620047954f0b28 (powerpc/dma: use 
the dma-direct allocator for coherent platforms)

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

git checkout 240d7ecd7f6fa62e074e8a835e620047954f0b28

Link to the Git: 
http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6

env LANG=C make CROSS_COMPILE=powerpc-linux-gnu- ARCH=powerpc zImage

Error message:

arch/powerpc/kernel/dma.o:(.data.rel.ro+0x0): undefined reference to 
`__dma_nommu_alloc_coherent'
arch/powerpc/kernel/dma.o:(.data.rel.ro+0x8): undefined reference to 
`__dma_nommu_free_coherent'
Makefile:1027: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1

-- Christian


On 12 January 2019 at 7:14PM, Christian Zigotzky wrote:
> Next step: 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39 (swiotlb: remove 
> swiotlb_dma_supported)
>
> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>
> git checkout 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39
>
> Output:
>
> You are in 'detached HEAD' state. You can look around, make experimental
> changes and commit them, and you can discard any commits you make in this
> state without impacting any branches by performing another checkout.
>
> If you want to create a new branch to retain commits you create, you may
> do so (now or later) by using -b with the checkout command again. 
> Example:
>
>   git checkout -b <new-branch-name>
>
> HEAD is now at 4558b6e... swiotlb: remove swiotlb_dma_supported
>
> ----
>
> Link to the Git: 
> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>
> Results: PASEMI onboard ethernet (X1000) works and the X5000 (P5020 
> board) boots. I also successfully tested sound, hardware 3D 
> acceleration, Bluetooth, network, booting with a label etc. The 
> uImages work also in a virtual e5500 quad-core QEMU machine.
>
> -- Christian
>
>
> On 11 January 2019 at 03:10AM, Christian Zigotzky wrote:
>> Next step: 891dcc1072f1fa27a83da920d88daff6ca08fc02 (powerpc/dma: 
>> remove dma_nommu_dma_supported)
>>
>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>
>> git checkout 891dcc1072f1fa27a83da920d88daff6ca08fc02
>>
>> Output:
>>
>> Note: checking out '891dcc1072f1fa27a83da920d88daff6ca08fc02'.
>>
>> You are in 'detached HEAD' state. You can look around, make experimental
>> changes and commit them, and you can discard any commits you make in 
>> this
>> state without impacting any branches by performing another checkout.
>>
>> If you want to create a new branch to retain commits you create, you may
>> do so (now or later) by using -b with the checkout command again. 
>> Example:
>>
>> git checkout -b <new-branch-name>
>>
>> HEAD is now at 891dcc1... powerpc/dma: remove dma_nommu_dma_supported
>>
>> ---
>>
>> Link to the Git: 
>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>
>> Results: PASEMI onboard ethernet works and the X5000 (P5020 board) 
>> boots. I also successfully tested sound, hardware 3D acceleration, 
>> Bluetooth, network, booting with a label etc. The uImages work also 
>> in a virtual e5500 quad-core QEMU machine.
>>
>> -- Christian
>>
>>
>> On 09 January 2019 at 10:31AM, Christian Zigotzky wrote:
>>> Next step: a64e18ba191ba9102fb174f27d707485ffd9389c (powerpc/dma: 
>>> remove dma_nommu_get_required_mask)
>>>
>>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>>
>>> git checkout a64e18ba191ba9102fb174f27d707485ffd9389c
>>>
>>> Link to the Git: 
>>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>>
>>> Results: PASEMI onboard ethernet works and the X5000 (P5020 board) 
>>> boots. I also successfully tested sound, hardware 3D acceleration, 
>>> Bluetooth, network, booting with a label etc. The uImages work also 
>>> in a virtual e5500 quad-core QEMU machine.
>>>
>>> -- Christian
>>>
>>>
>>> On 05 January 2019 at 5:03PM, Christian Zigotzky wrote:
>>>> Next step: c446404b041130fbd9d1772d184f24715cf2362f (powerpc/dma: 
>>>> remove dma_nommu_mmap_coherent)
>>>>
>>>> git clone git://git.infradead.org/users/hch/misc.git -b 
>>>> powerpc-dma.6 a
>>>>
>>>> git checkout c446404b041130fbd9d1772d184f24715cf2362f
>>>>
>>>> Output:
>>>>
>>>> Note: checking out 'c446404b041130fbd9d1772d184f24715cf2362f'.
>>>>
>>>> You are in 'detached HEAD' state. You can look around, make 
>>>> experimental
>>>> changes and commit them, and you can discard any commits you make 
>>>> in this
>>>> state without impacting any branches by performing another checkout.
>>>>
>>>> If you want to create a new branch to retain commits you create, 
>>>> you may
>>>> do so (now or later) by using -b with the checkout command again. 
>>>> Example:
>>>>
>>>>   git checkout -b <new-branch-name>
>>>>
>>>> HEAD is now at c446404... powerpc/dma: remove dma_nommu_mmap_coherent
>>>>
>>>> -----
>>>>
>>>> Link to the Git: 
>>>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>>>
>>>> Result: PASEMI onboard ethernet works and the X5000 (P5020 board) 
>>>> boots.
>>>>
>>>> -- Christian
>>>>
>>>
>>>
>>
>>
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-15  8:07                                                                                   ` Christian Zigotzky
@ 2019-01-15  8:49                                                                                     ` Christian Zigotzky
  2019-01-15 10:55                                                                                       ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-15  8:49 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: 63a6e350e037a21e9a88c8b710129bea7049a80f (powerpc/dma: use 
the dma_direct mapping routines)

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

git checkout 63a6e350e037a21e9a88c8b710129bea7049a80f

Error message:

arch/powerpc/kernel/dma.o:(.data.rel.ro+0x0): undefined reference to 
`__dma_nommu_alloc_coherent'
arch/powerpc/kernel/dma.o:(.data.rel.ro+0x8): undefined reference to 
`__dma_nommu_free_coherent'
Makefile:1027: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1

-- Christian


On 15 January 2019 at 09:07AM, Christian Zigotzky wrote:
> Next step: 240d7ecd7f6fa62e074e8a835e620047954f0b28 (powerpc/dma: use 
> the dma-direct allocator for coherent platforms)
>
> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>
> git checkout 240d7ecd7f6fa62e074e8a835e620047954f0b28
>
> Link to the Git: 
> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>
> env LANG=C make CROSS_COMPILE=powerpc-linux-gnu- ARCH=powerpc zImage
>
> Error message:
>
> arch/powerpc/kernel/dma.o:(.data.rel.ro+0x0): undefined reference to 
> `__dma_nommu_alloc_coherent'
> arch/powerpc/kernel/dma.o:(.data.rel.ro+0x8): undefined reference to 
> `__dma_nommu_free_coherent'
> Makefile:1027: recipe for target 'vmlinux' failed
> make: *** [vmlinux] Error 1
>
> -- Christian
>
>
> On 12 January 2019 at 7:14PM, Christian Zigotzky wrote:
>> Next step: 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39 (swiotlb: remove 
>> swiotlb_dma_supported)
>>
>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>
>> git checkout 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39
>>
>> Output:
>>
>> You are in 'detached HEAD' state. You can look around, make experimental
>> changes and commit them, and you can discard any commits you make in 
>> this
>> state without impacting any branches by performing another checkout.
>>
>> If you want to create a new branch to retain commits you create, you may
>> do so (now or later) by using -b with the checkout command again. 
>> Example:
>>
>>   git checkout -b <new-branch-name>
>>
>> HEAD is now at 4558b6e... swiotlb: remove swiotlb_dma_supported
>>
>> ----
>>
>> Link to the Git: 
>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>
>> Results: PASEMI onboard ethernet (X1000) works and the X5000 (P5020 
>> board) boots. I also successfully tested sound, hardware 3D 
>> acceleration, Bluetooth, network, booting with a label etc. The 
>> uImages work also in a virtual e5500 quad-core QEMU machine.
>>
>> -- Christian
>>
>>
>> On 11 January 2019 at 03:10AM, Christian Zigotzky wrote:
>>> Next step: 891dcc1072f1fa27a83da920d88daff6ca08fc02 (powerpc/dma: 
>>> remove dma_nommu_dma_supported)
>>>
>>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>>
>>> git checkout 891dcc1072f1fa27a83da920d88daff6ca08fc02
>>>
>>> Output:
>>>
>>> Note: checking out '891dcc1072f1fa27a83da920d88daff6ca08fc02'.
>>>
>>> You are in 'detached HEAD' state. You can look around, make 
>>> experimental
>>> changes and commit them, and you can discard any commits you make in 
>>> this
>>> state without impacting any branches by performing another checkout.
>>>
>>> If you want to create a new branch to retain commits you create, you 
>>> may
>>> do so (now or later) by using -b with the checkout command again. 
>>> Example:
>>>
>>> git checkout -b <new-branch-name>
>>>
>>> HEAD is now at 891dcc1... powerpc/dma: remove dma_nommu_dma_supported
>>>
>>> ---
>>>
>>> Link to the Git: 
>>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>>
>>> Results: PASEMI onboard ethernet works and the X5000 (P5020 board) 
>>> boots. I also successfully tested sound, hardware 3D acceleration, 
>>> Bluetooth, network, booting with a label etc. The uImages work also 
>>> in a virtual e5500 quad-core QEMU machine.
>>>
>>> -- Christian
>>>
>>>
>>> On 09 January 2019 at 10:31AM, Christian Zigotzky wrote:
>>>> Next step: a64e18ba191ba9102fb174f27d707485ffd9389c (powerpc/dma: 
>>>> remove dma_nommu_get_required_mask)
>>>>
>>>> git clone git://git.infradead.org/users/hch/misc.git -b 
>>>> powerpc-dma.6 a
>>>>
>>>> git checkout a64e18ba191ba9102fb174f27d707485ffd9389c
>>>>
>>>> Link to the Git: 
>>>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>>>
>>>> Results: PASEMI onboard ethernet works and the X5000 (P5020 board) 
>>>> boots. I also successfully tested sound, hardware 3D acceleration, 
>>>> Bluetooth, network, booting with a label etc. The uImages work also 
>>>> in a virtual e5500 quad-core QEMU machine.
>>>>
>>>> -- Christian
>>>>
>>>>
>>>> On 05 January 2019 at 5:03PM, Christian Zigotzky wrote:
>>>>> Next step: c446404b041130fbd9d1772d184f24715cf2362f (powerpc/dma: 
>>>>> remove dma_nommu_mmap_coherent)
>>>>>
>>>>> git clone git://git.infradead.org/users/hch/misc.git -b 
>>>>> powerpc-dma.6 a
>>>>>
>>>>> git checkout c446404b041130fbd9d1772d184f24715cf2362f
>>>>>
>>>>> Output:
>>>>>
>>>>> Note: checking out 'c446404b041130fbd9d1772d184f24715cf2362f'.
>>>>>
>>>>> You are in 'detached HEAD' state. You can look around, make 
>>>>> experimental
>>>>> changes and commit them, and you can discard any commits you make 
>>>>> in this
>>>>> state without impacting any branches by performing another checkout.
>>>>>
>>>>> If you want to create a new branch to retain commits you create, 
>>>>> you may
>>>>> do so (now or later) by using -b with the checkout command again. 
>>>>> Example:
>>>>>
>>>>>   git checkout -b <new-branch-name>
>>>>>
>>>>> HEAD is now at c446404... powerpc/dma: remove dma_nommu_mmap_coherent
>>>>>
>>>>> -----
>>>>>
>>>>> Link to the Git: 
>>>>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>>>>
>>>>> Result: PASEMI onboard ethernet works and the X5000 (P5020 board) 
>>>>> boots.
>>>>>
>>>>> -- Christian
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-15  8:49                                                                                     ` Christian Zigotzky
@ 2019-01-15 10:55                                                                                       ` Christian Zigotzky
  2019-01-15 13:35                                                                                         ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-15 10:55 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step: 21074ef03c0816ae158721a78cabe9035938dddd (powerpc/dma: use 
the generic direct mapping bypass)

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

git checkout 21074ef03c0816ae158721a78cabe9035938dddd

I was able to compile the kernel for the AmigaOne X1000 (Nemo board with 
PA Semi PA6T-1682M SoC). It boots but the PA Semi onboard ethernet 
doesn't work.

dmesg:

[   12.698063] pasemi_mac 0000:00:14.3 enp0s20f3: renamed from eth0
[   16.516966] IPv6: ADDRCONF(NETDEV_UP): enp0s20f3: link is not ready
[   16.521025] pci 0000:00:1a.0: overflow 0x000000026a587802+1646 of DMA 
mask ffffffff bus mask 0
[   16.521047] WARNING: CPU: 0 PID: 2318 at kernel/dma/direct.c:43 
.dma_direct_map_page+0x11c/0x200
[   16.521049] Modules linked in:
[   16.521056] CPU: 0 PID: 2318 Comm: NetworkManager Not tainted 
5.0.0-rc2-2_A-EON_AmigaOne_X1000_Nemo-54576-g21074ef-dirty #1
[   16.521059] NIP:  c00000000010395c LR: c000000000103a30 CTR: 
0000000000000000
[   16.521062] REGS: c00000026a1a29a0 TRAP: 0700   Not tainted 
(5.0.0-rc2-2_A-EON_AmigaOne_X1000_Nemo-54576-g21074ef-dirty)
[   16.521064] MSR:  900000000202b032 <SF,HV,VEC,EE,FP,ME,IR,DR,RI>  CR: 
22002442  XER: 20000000
[   16.521074] IRQMASK: 0
                GPR00: c000000000103a30 c00000026a1a2c30 
c000000001923f00 0000000000000052
                GPR04: c00000026f206778 c00000026f20d458 
c000000001ab1178 7063693a30303030
                GPR08: 0000000000000007 0000000000000000 
0000000000000000 0000000000000010
                GPR12: 3a30303a31612e30 c000000001b10000 
0000000000a79020 0000000000ace140
                GPR16: 00000000fffdd958 0000000000000000 
0000000000000000 c00000026be92220
                GPR20: 0000000000000000 c00000026a470000 
0000000000000000 0000000000000000
                GPR24: 0000000000000800 c00000026a1c0000 
c00000026bc69280 c00000026a1c0000
                GPR28: c000000277b1f588 000000000000066e 
c00000026d3c68b0 0000000000000802
[   16.521111] NIP [c00000000010395c] .dma_direct_map_page+0x11c/0x200
[   16.521114] LR [c000000000103a30] .dma_direct_map_page+0x1f0/0x200
[   16.521116] Call Trace:
[   16.521120] [c00000026a1a2c30] [c000000000103a30] 
.dma_direct_map_page+0x1f0/0x200 (unreliable)
[   16.521126] [c00000026a1a2cd0] [c00000000099b84c] 
.pasemi_mac_replenish_rx_ring+0x12c/0x2a0
[   16.521131] [c00000026a1a2da0] [c00000000099dcc4] 
.pasemi_mac_open+0x384/0x7c0
[   16.521137] [c00000026a1a2e40] [c000000000c6f4e4] .__dev_open+0x134/0x1e0
[   16.521142] [c00000026a1a2ee0] [c000000000c6fa4c] 
.__dev_change_flags+0x1bc/0x210
[   16.521147] [c00000026a1a2f90] [c000000000c6fae8] 
.dev_change_flags+0x48/0xa0
[   16.521153] [c00000026a1a3030] [c000000000c8c8ec] .do_setlink+0x3dc/0xf60
[   16.521158] [c00000026a1a31b0] [c000000000c8dde4] 
.__rtnl_newlink+0x5e4/0x900
[   16.521163] [c00000026a1a35f0] [c000000000c8e16c] .rtnl_newlink+0x6c/0xb0
[   16.521167] [c00000026a1a3680] [c000000000c89898] 
.rtnetlink_rcv_msg+0x2e8/0x3d0
[   16.521172] [c00000026a1a3760] [c000000000cc0ff0] 
.netlink_rcv_skb+0x120/0x170
[   16.521177] [c00000026a1a3820] [c000000000c87378] 
.rtnetlink_rcv+0x28/0x40
[   16.521181] [c00000026a1a38a0] [c000000000cc0458] 
.netlink_unicast+0x208/0x2f0
[   16.521186] [c00000026a1a3950] [c000000000cc0a08] 
.netlink_sendmsg+0x348/0x460
[   16.521190] [c00000026a1a3a30] [c000000000c387d4] .sock_sendmsg+0x44/0x70
[   16.521195] [c00000026a1a3ab0] [c000000000c3a7fc] 
.___sys_sendmsg+0x30c/0x320
[   16.521199] [c00000026a1a3ca0] [c000000000c3c414] 
.__sys_sendmsg+0x74/0xf0
[   16.521204] [c00000026a1a3d90] [c000000000cb4e00] 
.__se_compat_sys_sendmsg+0x40/0x60
[   16.521210] [c00000026a1a3e20] [c00000000000a21c] system_call+0x5c/0x70
[   16.521212] Instruction dump:
[   16.521215] 60000000 f8610070 3d20ffff 6129fffe 79290020 e8e70000 
7fa74840 409d00b8
[   16.521222] 3d420001 892acb59 2f890000 419e00b8 <0fe00000> 382100a0 
3860ffff e8010010
[   16.521231] ---[ end trace 2129e4121bbdd0e9 ]---

I wasn't able to compile it for the AmigaOne X5000 (Cyrus+ board with 
Qoriq P5020 SoC). Error message:

CALL    scripts/checksyscalls.sh
   CHK     include/generated/compile.h
   CC      arch/powerpc/sysdev/fsl_pci.o
arch/powerpc/sysdev/fsl_pci.c: In function 'fsl_pci_dma_set_mask':
arch/powerpc/sysdev/fsl_pci.c:142:21: error: 'dma_nommu_ops' undeclared 
(first use in this function)
    set_dma_ops(dev, &dma_nommu_ops);
                      ^
arch/powerpc/sysdev/fsl_pci.c:142:21: note: each undeclared identifier 
is reported only once for each function it appears in
scripts/Makefile.build:276: recipe for target 
'arch/powerpc/sysdev/fsl_pci.o' failed
make[2]: *** [arch/powerpc/sysdev/fsl_pci.o] Error 1
scripts/Makefile.build:492: recipe for target 'arch/powerpc/sysdev' failed
make[1]: *** [arch/powerpc/sysdev] Error 2
Makefile:1049: recipe for target 'arch/powerpc' failed
make: *** [arch/powerpc] Error 2

-- Christian


On 15 January 2019 at 09:49AM, Christian Zigotzky wrote:
> Next step: 63a6e350e037a21e9a88c8b710129bea7049a80f (powerpc/dma: use 
> the dma_direct mapping routines)
>
> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>
> git checkout 63a6e350e037a21e9a88c8b710129bea7049a80f
>
> Error message:
>
> arch/powerpc/kernel/dma.o:(.data.rel.ro+0x0): undefined reference to 
> `__dma_nommu_alloc_coherent'
> arch/powerpc/kernel/dma.o:(.data.rel.ro+0x8): undefined reference to 
> `__dma_nommu_free_coherent'
> Makefile:1027: recipe for target 'vmlinux' failed
> make: *** [vmlinux] Error 1
>
> -- Christian
>
>
> On 15 January 2019 at 09:07AM, Christian Zigotzky wrote:
>> Next step: 240d7ecd7f6fa62e074e8a835e620047954f0b28 (powerpc/dma: use 
>> the dma-direct allocator for coherent platforms)
>>
>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>
>> git checkout 240d7ecd7f6fa62e074e8a835e620047954f0b28
>>
>> Link to the Git: 
>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>
>> env LANG=C make CROSS_COMPILE=powerpc-linux-gnu- ARCH=powerpc zImage
>>
>> Error message:
>>
>> arch/powerpc/kernel/dma.o:(.data.rel.ro+0x0): undefined reference to 
>> `__dma_nommu_alloc_coherent'
>> arch/powerpc/kernel/dma.o:(.data.rel.ro+0x8): undefined reference to 
>> `__dma_nommu_free_coherent'
>> Makefile:1027: recipe for target 'vmlinux' failed
>> make: *** [vmlinux] Error 1
>>
>> -- Christian
>>
>>
>> On 12 January 2019 at 7:14PM, Christian Zigotzky wrote:
>>> Next step: 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39 (swiotlb: remove 
>>> swiotlb_dma_supported)
>>>
>>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>>
>>> git checkout 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39
>>>
>>> Output:
>>>
>>> You are in 'detached HEAD' state. You can look around, make 
>>> experimental
>>> changes and commit them, and you can discard any commits you make in 
>>> this
>>> state without impacting any branches by performing another checkout.
>>>
>>> If you want to create a new branch to retain commits you create, you 
>>> may
>>> do so (now or later) by using -b with the checkout command again. 
>>> Example:
>>>
>>>   git checkout -b <new-branch-name>
>>>
>>> HEAD is now at 4558b6e... swiotlb: remove swiotlb_dma_supported
>>>
>>> ----
>>>
>>> Link to the Git: 
>>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>>
>>> Results: PASEMI onboard ethernet (X1000) works and the X5000 (P5020 
>>> board) boots. I also successfully tested sound, hardware 3D 
>>> acceleration, Bluetooth, network, booting with a label etc. The 
>>> uImages work also in a virtual e5500 quad-core QEMU machine.
>>>
>>> -- Christian
>>>
>>>
>>> On 11 January 2019 at 03:10AM, Christian Zigotzky wrote:
>>>> Next step: 891dcc1072f1fa27a83da920d88daff6ca08fc02 (powerpc/dma: 
>>>> remove dma_nommu_dma_supported)
>>>>
>>>> git clone git://git.infradead.org/users/hch/misc.git -b 
>>>> powerpc-dma.6 a
>>>>
>>>> git checkout 891dcc1072f1fa27a83da920d88daff6ca08fc02
>>>>
>>>> Output:
>>>>
>>>> Note: checking out '891dcc1072f1fa27a83da920d88daff6ca08fc02'.
>>>>
>>>> You are in 'detached HEAD' state. You can look around, make 
>>>> experimental
>>>> changes and commit them, and you can discard any commits you make 
>>>> in this
>>>> state without impacting any branches by performing another checkout.
>>>>
>>>> If you want to create a new branch to retain commits you create, 
>>>> you may
>>>> do so (now or later) by using -b with the checkout command again. 
>>>> Example:
>>>>
>>>> git checkout -b <new-branch-name>
>>>>
>>>> HEAD is now at 891dcc1... powerpc/dma: remove dma_nommu_dma_supported
>>>>
>>>> ---
>>>>
>>>> Link to the Git: 
>>>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>>>
>>>> Results: PASEMI onboard ethernet works and the X5000 (P5020 board) 
>>>> boots. I also successfully tested sound, hardware 3D acceleration, 
>>>> Bluetooth, network, booting with a label etc. The uImages work also 
>>>> in a virtual e5500 quad-core QEMU machine.
>>>>
>>>> -- Christian
>>>>
>>>>
>>>> On 09 January 2019 at 10:31AM, Christian Zigotzky wrote:
>>>>> Next step: a64e18ba191ba9102fb174f27d707485ffd9389c (powerpc/dma: 
>>>>> remove dma_nommu_get_required_mask)
>>>>>
>>>>> git clone git://git.infradead.org/users/hch/misc.git -b 
>>>>> powerpc-dma.6 a
>>>>>
>>>>> git checkout a64e18ba191ba9102fb174f27d707485ffd9389c
>>>>>
>>>>> Link to the Git: 
>>>>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>>>>
>>>>> Results: PASEMI onboard ethernet works and the X5000 (P5020 board) 
>>>>> boots. I also successfully tested sound, hardware 3D acceleration, 
>>>>> Bluetooth, network, booting with a label etc. The uImages work 
>>>>> also in a virtual e5500 quad-core QEMU machine.
>>>>>
>>>>> -- Christian
>>>>>
>>>>>
>>>>> On 05 January 2019 at 5:03PM, Christian Zigotzky wrote:
>>>>>> Next step: c446404b041130fbd9d1772d184f24715cf2362f (powerpc/dma: 
>>>>>> remove dma_nommu_mmap_coherent)
>>>>>>
>>>>>> git clone git://git.infradead.org/users/hch/misc.git -b 
>>>>>> powerpc-dma.6 a
>>>>>>
>>>>>> git checkout c446404b041130fbd9d1772d184f24715cf2362f
>>>>>>
>>>>>> Output:
>>>>>>
>>>>>> Note: checking out 'c446404b041130fbd9d1772d184f24715cf2362f'.
>>>>>>
>>>>>> You are in 'detached HEAD' state. You can look around, make 
>>>>>> experimental
>>>>>> changes and commit them, and you can discard any commits you make 
>>>>>> in this
>>>>>> state without impacting any branches by performing another checkout.
>>>>>>
>>>>>> If you want to create a new branch to retain commits you create, 
>>>>>> you may
>>>>>> do so (now or later) by using -b with the checkout command again. 
>>>>>> Example:
>>>>>>
>>>>>>   git checkout -b <new-branch-name>
>>>>>>
>>>>>> HEAD is now at c446404... powerpc/dma: remove 
>>>>>> dma_nommu_mmap_coherent
>>>>>>
>>>>>> -----
>>>>>>
>>>>>> Link to the Git: 
>>>>>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>>>>>
>>>>>> Result: PASEMI onboard ethernet works and the X5000 (P5020 board) 
>>>>>> boots.
>>>>>>
>>>>>> -- Christian
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-15 10:55                                                                                       ` Christian Zigotzky
@ 2019-01-15 13:35                                                                                         ` Christoph Hellwig
  2019-01-15 13:56                                                                                           ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-15 13:35 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Tue, Jan 15, 2019 at 11:55:25AM +0100, Christian Zigotzky wrote:
> Next step: 21074ef03c0816ae158721a78cabe9035938dddd (powerpc/dma: use the 
> generic direct mapping bypass)
>
> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>
> git checkout 21074ef03c0816ae158721a78cabe9035938dddd
>
> I was able to compile the kernel for the AmigaOne X1000 (Nemo board with PA 
> Semi PA6T-1682M SoC). It boots but the PA Semi onboard ethernet doesn't 
> work.

Thanks.  But we are exactly missing the steps that are relevant.  I've
pushed a fixed up powerpc-dma.6 tree, which will only change starting from
the first commit that didn't link.

The first commit that changed from the old one is this one:

http://git.infradead.org/users/hch/misc.git/commitdiff/257002094bc5935dd63207a380d9698ab81f0775

which was that one that your compile failed on first.

Thanks again for all your work!

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-15 13:35                                                                                         ` Christoph Hellwig
@ 2019-01-15 13:56                                                                                           ` Christian Zigotzky
  2019-01-15 15:17                                                                                             ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-15 13:56 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 15 January 2019 at 2:35PM, Christoph Hellwig wrote:
> On Tue, Jan 15, 2019 at 11:55:25AM +0100, Christian Zigotzky wrote:
>> Next step: 21074ef03c0816ae158721a78cabe9035938dddd (powerpc/dma: use the
>> generic direct mapping bypass)
>>
>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>
>> git checkout 21074ef03c0816ae158721a78cabe9035938dddd
>>
>> I was able to compile the kernel for the AmigaOne X1000 (Nemo board with PA
>> Semi PA6T-1682M SoC). It boots but the PA Semi onboard ethernet doesn't
>> work.
> Thanks.  But we are exactly missing the steps that are relevant.  I've
> pushed a fixed up powerpc-dma.6 tree, which will only change starting from
> the first commit that didn't link.
>
> The first commit that changed from the old one is this one:
>
> http://git.infradead.org/users/hch/misc.git/commitdiff/257002094bc5935dd63207a380d9698ab81f0775
>
> which was that one that your compile failed on first.
>
> Thanks again for all your work!
>
Thank you! I tried the commit 240d7ecd7f6fa62e074e8a835e620047954f0b28 
(powerpc/dma: use the dma-direct allocator for coherent platforms) again.

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

git checkout 240d7ecd7f6fa62e074e8a835e620047954f0b28

I modified the 'dma.c' patch because of the undefined references to 
'__dma_nommu_free_coherent' and '__dma_nommu_alloc_coherent':

---

@@ -163,8 +99,13 @@ static inline void dma_nommu_sync_single(struct 
device *dev,
  #endif

  const struct dma_map_ops dma_nommu_ops = {
+       .alloc                          = dma_direct_alloc,
+       .free                           = dma_direct_free,
         .map_sg                         = dma_nommu_map_sg,
         .unmap_sg                       = dma_nommu_unmap_sg,
         .dma_supported                  = dma_direct_supported,

---

The X1000 boots and the PASEMI onboard ethernet works! X5000 (P5020 
board): U-Boot loads the kernel and the dtb file. Then the kernel starts 
but it doesn't find any hard disks (partitions).

-- Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-15 13:56                                                                                           ` Christian Zigotzky
@ 2019-01-15 15:17                                                                                             ` Christoph Hellwig
  2019-01-17  9:21                                                                                               ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-15 15:17 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Tue, Jan 15, 2019 at 02:56:34PM +0100, Christian Zigotzky wrote:
> On 15 January 2019 at 2:35PM, Christoph Hellwig wrote:
>> On Tue, Jan 15, 2019 at 11:55:25AM +0100, Christian Zigotzky wrote:
>>> Next step: 21074ef03c0816ae158721a78cabe9035938dddd (powerpc/dma: use the
>>> generic direct mapping bypass)
>>>
>>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>>
>>> git checkout 21074ef03c0816ae158721a78cabe9035938dddd
>>>
>>> I was able to compile the kernel for the AmigaOne X1000 (Nemo board with PA
>>> Semi PA6T-1682M SoC). It boots but the PA Semi onboard ethernet doesn't
>>> work.
>> Thanks.  But we are exactly missing the steps that are relevant.  I've
>> pushed a fixed up powerpc-dma.6 tree, which will only change starting from
>> the first commit that didn't link.
>>
>> The first commit that changed from the old one is this one:
>>
>> http://git.infradead.org/users/hch/misc.git/commitdiff/257002094bc5935dd63207a380d9698ab81f0775
>>
>> which was that one that your compile failed on first.
>>
>> Thanks again for all your work!
>>
> Thank you! I tried the commit 240d7ecd7f6fa62e074e8a835e620047954f0b28 
> (powerpc/dma: use the dma-direct allocator for coherent platforms) again.
>
> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>
> git checkout 240d7ecd7f6fa62e074e8a835e620047954f0b28
>
> I modified the 'dma.c' patch because of the undefined references to 
> '__dma_nommu_free_coherent' and '__dma_nommu_alloc_coherent':

So 257002094bc5935dd63207a380d9698ab81f0775 above is the fixed version
for the commit - this switched the ifdef in dma.c around that I had
inverted.  Can you try that one instead?  And then move on with the
commits after it in the updated powerpc-dma.6 branch - they are
identical to the original branch except for carrying this fix forward.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-15 15:17                                                                                             ` Christoph Hellwig
@ 2019-01-17  9:21                                                                                               ` Christian Zigotzky
  2019-01-17  9:31                                                                                                 ` Christoph Hellwig
  2019-01-18  8:35                                                                                                 ` Christoph Hellwig
  0 siblings, 2 replies; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-17  9:21 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hi All,

I compiled the fixed '257002094bc5935dd63207a380d9698ab81f0775' 
(powerpc/dma: use the dma-direct allocator for coherent platforms) today.

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

git checkout 257002094bc5935dd63207a380d9698ab81f0775

Link to the Git: 
http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6 


env LANG=C make CROSS_COMPILE=powerpc-linux-gnu- ARCH=powerpc zImage

env LANG=C make CROSS_COMPILE=powerpc-linux-gnu- ARCH=powerpc uImage

The X1000 boots and the PASEMI onboard ethernet works!

Bad news for the X5000 (P5020 board). U-Boot loads the kernel and the 
dtb file. Then the kernel starts but it doesn't find any hard disks 
(partitions).

Cheers,
Christian


On 15 January 2019 at 4:17PM, Christoph Hellwig wrote:

So 257002094bc5935dd63207a380d9698ab81f0775 above is the fixed version
for the commit - this switched the ifdef in dma.c around that I had
inverted.  Can you try that one instead?  And then move on with the
commits after it in the updated powerpc-dma.6 branch - they are
identical to the original branch except for carrying this fix forward.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-17  9:21                                                                                               ` Christian Zigotzky
@ 2019-01-17  9:31                                                                                                 ` Christoph Hellwig
  2019-01-17  9:44                                                                                                   ` Christian Zigotzky
  2019-01-18  8:35                                                                                                 ` Christoph Hellwig
  1 sibling, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-17  9:31 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Thu, Jan 17, 2019 at 10:21:11AM +0100, Christian Zigotzky wrote:
> The X1000 boots and the PASEMI onboard ethernet works!
>
> Bad news for the X5000 (P5020 board). U-Boot loads the kernel and the dtb 
> file. Then the kernel starts but it doesn't find any hard disks 
> (partitions).

Thanks for bisecting so far, and lets stop here until I manage to
resolve the problem.

Can you send me the .config and the dtb file for this board?

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-17  9:31                                                                                                 ` Christoph Hellwig
@ 2019-01-17  9:44                                                                                                   ` Christian Zigotzky
  0 siblings, 0 replies; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-17  9:44 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

[-- Attachment #1: Type: text/plain, Size: 614 bytes --]

On 17 January 2019 at 10:31AM, Christoph Hellwig wrote:
> On Thu, Jan 17, 2019 at 10:21:11AM +0100, Christian Zigotzky wrote:
>> The X1000 boots and the PASEMI onboard ethernet works!
>>
>> Bad news for the X5000 (P5020 board). U-Boot loads the kernel and the dtb
>> file. Then the kernel starts but it doesn't find any hard disks
>> (partitions).
> Thanks for bisecting so far, and lets stop here until I manage to
> resolve the problem.
>
> Can you send me the .config and the dtb file for this board?
>
Please find attached the Cyrus kernel config (X5000) and the source 
files for the dtb file.

-- Christian


[-- Attachment #2: cyrus-5.0-rc2.config --]
[-- Type: text/plain, Size: 136324 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 5.0.0-rc2 Kernel Configuration
#

#
# Compiler: powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=50400
CONFIG_CLANG_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="_A-EON_A1-X5000"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_KERNEL_GZIP=y
CONFIG_DEFAULT_HOSTNAME="AmigaOneX5000"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_SYSCALL is not set
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
CONFIG_PPC64=y

#
# Processor support
#
# CONFIG_PPC_BOOK3S_64 is not set
CONFIG_PPC_BOOK3E_64=y
# CONFIG_GENERIC_CPU is not set
CONFIG_E5500_CPU=y
# CONFIG_E6500_CPU is not set
CONFIG_TARGET_CPU_BOOL=y
CONFIG_PPC_BOOK3E=y
CONFIG_E500=y
CONFIG_PPC_E500MC=y
CONFIG_PPC_FPU=y
CONFIG_FSL_EMB_PERFMON=y
CONFIG_FSL_EMB_PERF_EVENT=y
CONFIG_FSL_EMB_PERF_EVENT_E500=y
CONFIG_BOOKE=y
CONFIG_PPC_FSL_BOOK3E=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_MMU_NOHASH=y
CONFIG_PPC_BOOK3E_MMU=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_PPC_DOORBELL=y
CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NR_IRQS=512
CONFIG_NMI_IPI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
CONFIG_PPC=y
CONFIG_PPC_BARRIER_NOSPEC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=180
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_UDBG_16550=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PPC_ADV_DEBUG_REGS=y
CONFIG_PPC_ADV_DEBUG_IACS=2
CONFIG_PPC_ADV_DEBUG_DACS=2
CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_ZONE_DMA=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_PPC_MSI_BITMAP=y
CONFIG_FSL_CORENET_RCPM=y

#
# Platform support
#
CONFIG_FSL_SOC_BOOKE=y
CONFIG_PPC_QEMU_E500=y
CONFIG_CORENET_GENERIC=y
# CONFIG_KVM_GUEST is not set
CONFIG_EPAPR_PARAVIRT=y
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
CONFIG_PPC_SMP_MUXED_IPI=y
CONFIG_MPIC=y
CONFIG_MPIC_TIMER=y
# CONFIG_FSL_MPIC_TIMER_WAKEUP is not set
CONFIG_PPC_EPAPR_HV_PIC=y
CONFIG_MPIC_MSGR=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPUIdle driver
#

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# POWERPC CPU Idle Drivers
#
# CONFIG_GEN_RTC is not set
# CONFIG_SIMPLE_GPIO is not set

#
# Kernel options
#
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_MATH_EMULATION=y
CONFIG_MATH_EMULATION_FULL=y
# CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED is not set
# CONFIG_LD_HEAD_STUB_CATCH is not set
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
# CONFIG_RELOCATABLE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_ILLEGAL_POINTER_VALUE=0x5deadbeef0000000
CONFIG_PPC_4K_PAGES=y
CONFIG_THREAD_SHIFT=14
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200 console=tty0 mem=3500M"
# CONFIG_CMDLINE_FORCE is not set
CONFIG_EXTRA_TARGETS=""
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y

#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
CONFIG_FSL_LBC=y
CONFIG_FSL_RIO=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_VCPU_ASYNC_IOCTL=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_BOOKE_HV=y
# CONFIG_KVM_EXIT_TIMING is not set
CONFIG_KVM_E500MC=y
CONFIG_KVM_MPIC=y
CONFIG_VHOST_NET=m
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
# CONFIG_REFCOUNT_FULL is not set

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
CONFIG_ZSMALLOC_STAT=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_FRAME_VECTOR=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_IP_MROUTE_COMMON=y
# CONFIG_IP_MROUTE is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_ESP_OFFLOAD is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
CONFIG_TCP_CONG_DCTCP=y
CONFIG_TCP_CONG_CDG=y
# CONFIG_TCP_CONG_BBR is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_DCTCP is not set
# CONFIG_DEFAULT_CDG is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_ILA=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
CONFIG_IPV6_VTI=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_FOU=y
CONFIG_IPV6_FOU_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NETFILTER_NETLINK_OSF is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NF_LOG_NETDEV is not set
# CONFIG_NF_TABLES is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
# CONFIG_NF_REJECT_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=y
CONFIG_RDS=y
CONFIG_RDS_TCP=y
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_DIAG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
# CONFIG_L2TP_V3 is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=y
# CONFIG_6LOWPAN_DEBUGFS is not set
CONFIG_6LOWPAN_NHC=y
CONFIG_6LOWPAN_NHC_DEST=y
CONFIG_6LOWPAN_NHC_FRAGMENT=y
CONFIG_6LOWPAN_NHC_HOP=y
CONFIG_6LOWPAN_NHC_IPV6=y
CONFIG_6LOWPAN_NHC_MOBILITY=y
CONFIG_6LOWPAN_NHC_ROUTING=y
CONFIG_6LOWPAN_NHC_UDP=y
# CONFIG_6LOWPAN_GHC_EXT_HDR_HOP is not set
# CONFIG_6LOWPAN_GHC_UDP is not set
# CONFIG_6LOWPAN_GHC_ICMPV6 is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_DEST is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BLA is not set
# CONFIG_BATMAN_ADV_DAT is not set
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_MCAST is not set
CONFIG_BATMAN_ADV_DEBUGFS=y
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
CONFIG_BT_LEDS=y
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_FAILOVER=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#

#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_HOST is not set
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_XILINX is not set

#
# DesignWare PCI Core Support
#

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# CONFIG_PCCARD is not set
CONFIG_HAVE_RAPIDIO=y
CONFIG_RAPIDIO=y
# CONFIG_RAPIDIO_TSI721 is not set
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
# CONFIG_RAPIDIO_DMA_ENGINE is not set
# CONFIG_RAPIDIO_DEBUG is not set
# CONFIG_RAPIDIO_ENUM_BASIC is not set
# CONFIG_RAPIDIO_CHMAN is not set
# CONFIG_RAPIDIO_MPORT_CDEV is not set

#
# RapidIO Switch drivers
#
# CONFIG_RAPIDIO_TSI57X is not set
# CONFIG_RAPIDIO_CPS_XX is not set
# CONFIG_RAPIDIO_TSI568 is not set
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_RAPIDIO_RXS_GEN3 is not set

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE="radeon/ARUBA_me.bin radeon/ARUBA_pfp.bin radeon/ARUBA_rlc.bin radeon/BARTS_mc.bin radeon/BARTS_me.bin radeon/BARTS_pfp.bin radeon/BARTS_smc.bin radeon/bonaire_ce.bin radeon/bonaire_mc.bin radeon/bonaire_me.bin radeon/bonaire_mec.bin  radeon/bonaire_pfp.bin radeon/bonaire_rlc.bin radeon/bonaire_sdma.bin radeon/bonaire_smc.bin radeon/BONAIRE_uvd.bin radeon/BONAIRE_vce.bin radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin radeon/CAICOS_pfp.bin radeon/CAICOS_smc.bin radeon/CAYMAN_mc.bin radeon/CAYMAN_me.bin radeon/CAYMAN_pfp.bin radeon/CAYMAN_rlc.bin radeon/CAYMAN_smc.bin radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin radeon/CEDAR_smc.bin radeon/CYPRESS_me.bin radeon/CYPRESS_pfp.bin radeon/CYPRESS_rlc.bin radeon/CYPRESS_smc.bin radeon/CYPRESS_uvd.bin radeon/hainan_ce.bin radeon/hainan_mc.bin radeon/hainan_me.bin radeon/hainan_pfp.bin radeon/hainan_rlc.bin radeon/hainan_smc.bin radeon/hawaii_ce.bin radeon/hawaii_mc.bin radeon/hawaii_me.bin radeon/hawaii_mec.bin radeon/hawaii_pfp.bin radeon/hawaii_rlc.bin radeon/hawaii_sdma.bin radeon/hawaii_smc.bin radeon/JUNIPER_me.bin radeon/JUNIPER_pfp.bin radeon/JUNIPER_rlc.bin radeon/JUNIPER_smc.bin radeon/kabini_ce.bin radeon/kabini_me.bin radeon/kabini_mec.bin radeon/kabini_pfp.bin radeon/kabini_rlc.bin radeon/kabini_sdma.bin radeon/kaveri_ce.bin radeon/kaveri_me.bin radeon/kaveri_mec2.bin radeon/kaveri_mec.bin radeon/kaveri_pfp.bin radeon/kaveri_rlc.bin radeon/kaveri_sdma.bin radeon/mullins_ce.bin radeon/mullins_me.bin radeon/mullins_mec.bin radeon/mullins_pfp.bin radeon/mullins_rlc.bin radeon/mullins_sdma.bin radeon/oland_ce.bin radeon/oland_mc.bin radeon/oland_me.bin radeon/oland_pfp.bin radeon/oland_rlc.bin radeon/oland_smc.bin radeon/PALM_me.bin radeon/PALM_pfp.bin radeon/pitcairn_ce.bin radeon/pitcairn_k_smc.bin radeon/pitcairn_mc.bin radeon/pitcairn_me.bin radeon/pitcairn_pfp.bin radeon/pitcairn_rlc.bin radeon/pitcairn_smc.bin radeon/R100_cp.bin radeon/R200_cp.bin radeon/R300_cp.bin radeon/R420_cp.bin radeon/R520_cp.bin radeon/R600_me.bin radeon/R600_pfp.bin radeon/R600_rlc.bin radeon/R600_uvd.bin radeon/R700_rlc.bin radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin radeon/REDWOOD_rlc.bin radeon/REDWOOD_smc.bin radeon/RS600_cp.bin radeon/RS690_cp.bin radeon/RS780_me.bin radeon/RS780_pfp.bin radeon/RS780_uvd.bin radeon/RV610_me.bin radeon/RV610_pfp.bin radeon/RV620_me.bin radeon/RV620_pfp.bin radeon/RV630_me.bin radeon/RV630_pfp.bin radeon/RV635_me.bin radeon/RV635_pfp.bin radeon/RV670_me.bin radeon/RV670_pfp.bin radeon/RV710_me.bin radeon/RV710_pfp.bin radeon/RV710_smc.bin radeon/RV710_uvd.bin radeon/RV730_me.bin radeon/RV730_pfp.bin radeon/RV730_smc.bin radeon/RV740_smc.bin radeon/RV770_me.bin radeon/RV770_pfp.bin radeon/RV770_smc.bin radeon/RV770_uvd.bin radeon/SUMO2_me.bin radeon/SUMO2_pfp.bin radeon/SUMO_me.bin radeon/SUMO_pfp.bin radeon/SUMO_rlc.bin radeon/SUMO_uvd.bin radeon/tahiti_ce.bin radeon/tahiti_mc.bin radeon/tahiti_me.bin radeon/tahiti_pfp.bin radeon/tahiti_rlc.bin radeon/tahiti_smc.bin radeon/TAHITI_uvd.bin radeon/TAHITI_vce.bin radeon/TURKS_mc.bin radeon/TURKS_me.bin radeon/TURKS_pfp.bin radeon/TURKS_smc.bin radeon/verde_ce.bin radeon/verde_mc.bin radeon/verde_me.bin radeon/verde_pfp.bin radeon/verde_rlc.bin radeon/verde_smc.bin radeon/si58_mc.bin radeon/hawaii_k_smc.bin radeon/hainan_k_smc.bin radeon/bonaire_k_smc.bin radeon/tahiti_k_smc.bin radeon/oland_k_smc.bin radeon/verde_k_smc.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set

#
# Bus devices
#
# CONFIG_SIMPLE_PM_BUS is not set
# CONFIG_CONNECTOR is not set
# CONFIG_GNSS is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set

#
# Partition parsers
#
# CONFIG_MTD_REDBOOT_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_MCHP23K256 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_NAND_DENALI_PCI is not set
# CONFIG_MTD_NAND_DENALI_DT is not set
# CONFIG_MTD_NAND_GPIO is not set
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_MTD_NAND_FSL_IFC=y
# CONFIG_MTD_SPI_NAND is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_MT81xx_NOR is not set
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_ZRAM=y
# CONFIG_ZRAM_WRITEBACK is not set
# CONFIG_ZRAM_MEMORY_TRACKING is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_PVPANIC is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=m

#
# Intel MIC & related support
#

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_AHCI_CEVA is not set
CONFIG_AHCI_QORIQ=y
CONFIG_SATA_FSL=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=y
# CONFIG_SATA_NV is not set
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_SIL680=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BCACHE=y
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_UNSTRIPED is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_RIONET is not set
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FSL_FMAN=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_FSL_XGMAC_MDIO=y
CONFIG_GIANFAR=y
CONFIG_FSL_DPAA_ETH=y
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SMSC is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_MDIO_BUS_MUX=y
CONFIG_MDIO_BUS_MUX_GPIO=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
CONFIG_AQUANTIA_PHY=y
# CONFIG_ASIX_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
CONFIG_MICROCHIP_PHY=y
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=y
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPPOATM is not set
CONFIG_PPPOE=y
# CONFIG_PPPOL2TP is not set
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_LAN78XX=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
# CONFIG_USB_NET_AQC111 is not set
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ADM8211=m
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
CONFIG_AT76C50X_USB=m
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_SDIO is not set
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
# CONFIG_B43_PHY_G is not set
# CONFIG_B43_PHY_N is not set
# CONFIG_B43_PHY_LP is not set
# CONFIG_B43_PHY_HT is not set
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_HERMES=m
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
# CONFIG_ORINOCO_USB is not set
# CONFIG_P54_COMMON is not set
CONFIG_PRISM54=m
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x0U is not set
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT76x2U is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
# CONFIG_RT2800USB_RT3573 is not set
# CONFIG_RT2800USB_RT53XX is not set
# CONFIG_RT2800USB_RT55XX is not set
# CONFIG_RT2800USB_UNKNOWN is not set
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
# CONFIG_RTL8XXXU is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=m
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
# CONFIG_MAC80211_HWSIM is not set
CONFIG_USB_NET_RNDIS_WLAN=m
# CONFIG_VIRT_WIFI is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_PSXPAD_SPI is not set
# CONFIG_JOYSTICK_PXRC is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_AR1021_I2C=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=m
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
# CONFIG_TOUCHSCREEN_EXC3000 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
CONFIG_TOUCHSCREEN_ILI210X=m
# CONFIG_TOUCHSCREEN_S6SY761 is not set
CONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MELFAS_MIP4=m
CONFIG_TOUCHSCREEN_MTOUCH=m
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=m
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=m
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_PIXCIR=m
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
CONFIG_TOUCHSCREEN_TSC2004=m
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
CONFIG_TOUCHSCREEN_ST1232=m
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
CONFIG_TOUCHSCREEN_SX8654=m
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_ATI_REMOTE2=m
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_CM109=m
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_GPIO_PS2 is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_PPC_EPAPR_HV_BYTECHAN=y
# CONFIG_PPC_EARLY_DEBUG_EHV_BC is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_ASPEED_VUART is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SERIAL_8250_MOXA is not set
# CONFIG_SERIAL_OF_PLATFORM is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_UDBG is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=m
CONFIG_HW_RANDOM_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# CONFIG_RANDOM_TRUST_CPU is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
CONFIG_SPI_GPIO=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_CPM=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_FSL_ESPI=y
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_QORIQ=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PINCTRL is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_CADENCE is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_FTGPIO010 is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_MOCKUP is not set
CONFIG_GPIO_MPC8XXX=y
# CONFIG_GPIO_XILINX is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set

#
# MFD GPIO expanders
#

#
# PCI GPIO expanders
#
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set

#
# USB GPIO expanders
#
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_RESET_SYSCON is not set
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LTC3651 is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_AT91_USART is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=m
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_REGULATOR is not set
CONFIG_CEC_CORE=y
CONFIG_RC_CORE=m
# CONFIG_RC_MAP is not set
# CONFIG_LIRC is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
# CONFIG_IR_IMON_DECODER is not set
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
# CONFIG_IR_IMON_RAW is not set
CONFIG_IR_MCEUSB=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
CONFIG_RC_LOOPBACK=m
CONFIG_IR_GPIO_CIR=m
# CONFIG_IR_SERIAL is not set
# CONFIG_IR_SIR is not set
# CONFIG_RC_XBOX_DVD is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
# CONFIG_MEDIA_CEC_SUPPORT is not set
CONFIG_MEDIA_CONTROLLER=y
# CONFIG_MEDIA_CONTROLLER_DVB is not set
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_FWNODE=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_DVB_CORE=m
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_DTCS033 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_JL2005BCD is not set
# CONFIG_USB_GSPCA_KINECT is not set
# CONFIG_USB_GSPCA_KONICA is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_NW80X is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SE401 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SPCA1528 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_SQ930X is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STK1135 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TOPRO is not set
# CONFIG_USB_GSPCA_TOUPTEK is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160=m
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
# CONFIG_DVB_USB_AF9005 is not set
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
# CONFIG_DVB_USB_ZD1301 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m

#
# Software defined radio USB devices
#
# CONFIG_USB_AIRSPY is not set
# CONFIG_USB_HACKRF is not set
# CONFIG_USB_MSI2500 is not set
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
# CONFIG_VIDEO_DT3155 is not set

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_OSD is not set
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_DVB_NETUP_UNIDVB is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_VIDEO_CADENCE is not set
# CONFIG_VIDEO_ASPEED is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIVID is not set
# CONFIG_VIDEO_VIM2M is not set
# CONFIG_VIDEO_VICODEC is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
# CONFIG_SDR_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_SMS_SDIO_DRV is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_USB_KEENE=m
CONFIG_USB_RAREMONO=m
CONFIG_USB_MA901=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=m

#
# Texas Instruments WL128x FM driver (ST based)
#

#
# Supported FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m

#
# Camera sensor devices
#
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_MT9V011=m

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# SDR tuner chips
#

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m

#
# Sensors used on soc_camera driver
#

#
# Media SPI Adapters
#
# CONFIG_CXD2880_SPI_DRV is not set
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_GP8PSK_FE=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=3
CONFIG_DRM=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#

#
# AMD Library routines
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_CIRRUS_QEMU=y
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_LVDS is not set
CONFIG_DRM_QXL=y
CONFIG_DRM_BOCHS=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_LG_LG4573 is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_DUMB_VGA_DAC is not set
# CONFIG_DRM_LVDS_ENCODER is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_ARCPGU is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_MXSFB is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_OF is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_FSL_DIU is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
CONFIG_LOGO=y
# CONFIG_FB_LOGO_CENTER is not set
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=y
CONFIG_SND_SEQ_MIDI=y
CONFIG_SND_SEQ_MIDI_EMUL=y
CONFIG_SND_SEQ_VIRMIDI=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_OPL3_LIB_SEQ=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=y
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
CONFIG_SND_CTXFI=m
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=y
CONFIG_SND_EMU10K1_SEQ=y
CONFIG_SND_EMU10K1X=y
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
# CONFIG_SND_ES1968_INPUT is not set
# CONFIG_SND_ES1968_RADIO is not set
CONFIG_SND_FM801=y
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_ANALOG=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_SIGMATEL=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_VIA=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_CONEXANT=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_CA0110=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_CA0132=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_SI3054=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_GENERIC=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_PPC is not set
# CONFIG_SND_SPI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_UA101=y
CONFIG_SND_USB_USX2Y=y
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_FIREWIRE=y
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
# CONFIG_SND_ISIGHT is not set
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_SYNTH_EMUX=y
CONFIG_AC97_BUS=y

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_HID_LOGITECH_HIDPP=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=m
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEAM=y
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_WACOM=m
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
CONFIG_USB_SERIAL_IR=m
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
CONFIG_USB_SERIAL_GARMIN=m
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=m
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ATM is not set

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=y
# CONFIG_UWB is not set
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
# CONFIG_PWRSEQ_SD8787 is not set
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_SDHCI_OF_ARASAN is not set
# CONFIG_MMC_SDHCI_OF_AT91 is not set
CONFIG_MMC_SDHCI_OF_ESDHC=y
# CONFIG_MMC_SDHCI_OF_HLWD is not set
# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set
# CONFIG_MMC_SDHCI_CADENCE is not set
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_CQHCI=y
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_MMC_SDHCI_OMAP is not set
# CONFIG_MMC_SDHCI_AM654 is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AS3645A is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_CR0014114 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_LM3601X is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_KTD2692 is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MPC85XX is not set
# CONFIG_EDAC_CPC925 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_DS1374_WDT is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_R7301 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_DW_AXI_DMAC is not set
CONFIG_FSL_DMA=y
CONFIG_FSL_EDMA=y
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_FSL_ELBC_GPCM is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_VIRT_DRIVERS=y
CONFIG_FSL_HV_MANAGER=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_CLK_HSDK is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
CONFIG_CLK_QORIQ=y
# CONFIG_COMMON_CLK_VC5 is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_MAILBOX=y
# CONFIG_PLATFORM_MHU is not set
CONFIG_ALTERA_MBOX=y
# CONFIG_MAILBOX_TEST is not set
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_FSL_PAMU is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
# CONFIG_RPMSG_CHAR is not set
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
CONFIG_RPMSG_VIRTIO=y
# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#

#
# Broadcom SoC drivers
#

#
# NXP/Freescale QorIQ SoC drivers
#
CONFIG_FSL_DPAA=y
# CONFIG_FSL_DPAA_CHECKING is not set
# CONFIG_FSL_BMAN_TEST is not set
# CONFIG_FSL_QMAN_TEST is not set
CONFIG_FSL_GUTS=y

#
# i.MX SoC drivers
#

#
# Qualcomm SoC drivers
#
# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
CONFIG_FSL_CORENET_CF=y
CONFIG_FSL_IFC=y
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_CADENCE_DP is not set
# CONFIG_PHY_CADENCE_SIERRA is not set
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
# CONFIG_PHY_QCOM_USB_HS is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_TUSB1210 is not set
CONFIG_POWERCAP=y
# CONFIG_IDLE_INJECT is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=y
CONFIG_NVMEM=y

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set

#
# File systems
#
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_ENCRYPTION=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FS_ENCRYPTION is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
# CONFIG_CRAMFS_MTD is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_SWAP is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128L is not set
# CONFIG_CRYPTO_AEGIS256 is not set
# CONFIG_CRYPTO_MORUS640 is not set
# CONFIG_CRYPTO_MORUS1280 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
# CONFIG_CRYPTO_ADIANTUM is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MD5_PPC is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=m
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_PPC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_6x10 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_TER16x32 is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_STACKTRACE is not set
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_PPC_EMULATED_STATS=y
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
# CONFIG_XMON is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_PPC_PTDUMP is not set

[-- Attachment #3: cyrus_p5020.eth.dts --]
[-- Type: text/plain, Size: 3807 bytes --]

/*
 * Cyrus 5020 Device Tree Source, based on p5020ds.dts
 *
 * Copyright 2015 Andy Fleming
 *
 * p5020ds.dts copyright:
 * Copyright 2010 - 2014 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/include/ "cyrus-pre.dtsi"

/ {
	model = "varisys,CYRUS";
	compatible = "varisys,CYRUS";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	aliases {
		phy_rgmii_3 = &phy_rgmii_3;
		phy_rgmii_7 = &phy_rgmii_7;
	};

	memory {
		device_type = "memory";
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		bman_fbpr: bman-fbpr {
			size = <0 0x1000000>;
			alignment = <0 0x1000000>;
		};
		qman_fqd: qman-fqd {
			size = <0 0x400000>;
			alignment = <0 0x400000>;
		};
		qman_pfdr: qman-pfdr {
			size = <0 0x2000000>;
			alignment = <0 0x2000000>;
		};
	};

	dcsr: dcsr@f00000000 {
		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
	};

	bportals: bman-portals@ff4000000 {
		ranges = <0x0 0xf 0xf4000000 0x200000>;
	};

	qportals: qman-portals@ff4200000 {
		ranges = <0x0 0xf 0xf4200000 0x200000>;
	};

	soc: soc@ffe000000 {
		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
		reg = <0xf 0xfe000000 0 0x00001000>;
		spi@110000 {
		};

		i2c@118100 {
		};

		i2c@119100 {
			rtc@6f {
				compatible = "microchip,mcp7941x";
				reg = <0x6f>;
			};
		};
		fman@400000 {

			mdio@e1120 {

				phy_rgmii_3: ethernet-phy@3 {
					reg = <0x3>;
				};

				phy_rgmii_7: ethernet-phy@7 {
					reg = <0x7>;
				};
			};

			ethernet@e6000 {
				phy-handle = <&phy_rgmii_3>;
				phy-connection-type = "rgmii";
			};

			ethernet@e8000 {
				phy-handle = <&phy_rgmii_7>;
				phy-connection-type = "rgmii";
			};

		};
	};

	rio: rapidio@ffe0c0000 {
		reg = <0xf 0xfe0c0000 0 0x11000>;

		port1 {
			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
		};
		port2 {
			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
		};
	};

	lbc: localbus@ffe124000 {
		reg = <0xf 0xfe124000 0 0x1000>;
		ranges = <0 0 0xf 0xe8000000 0x08000000
			  2 0 0xf 0xffa00000 0x00040000
			  3 0 0xf 0xffdf0000 0x00008000>;
	};

	pci0: pcie@ffe200000 {
		reg = <0xf 0xfe200000 0 0x1000>;
		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x20000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};

	pci1: pcie@ffe201000 {
		reg = <0xf 0xfe201000 0 0x1000>;
		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x20000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};

	pci2: pcie@ffe202000 {
		reg = <0xf 0xfe202000 0 0x1000>;
		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x20000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};

	pci3: pcie@ffe203000 {
		reg = <0xf 0xfe203000 0 0x1000>;
		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x20000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};
};

/include/ "p5020si-post.dtsi"

[-- Attachment #4: cyrus-pre.dtsi --]
[-- Type: text/plain, Size: 3260 bytes --]

/*
 * P5020/P5010 Silicon/SoC Device Tree Source (pre include)
 *
 * Copyright 2011 - 2015 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/dts-v1/;

/include/ "e5500_power_isa.dtsi"

/ {
	compatible = "fsl,P5020";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	aliases {
		ccsr = &soc;
		dcsr = &dcsr;

		serial0 = &serial0;
		serial1 = &serial1;
		serial2 = &serial2;
		serial3 = &serial3;
		pci0 = &pci0;
		pci1 = &pci1;
		pci2 = &pci2;
		pci3 = &pci3;
		usb0 = &usb0;
		usb1 = &usb1;
		dma0 = &dma0;
		dma1 = &dma1;
		sdhc = &sdhc;
		msi0 = &msi0;
		msi1 = &msi1;
		msi2 = &msi2;

		crypto = &crypto;
		sec_jr0 = &sec_jr0;
		sec_jr1 = &sec_jr1;
		sec_jr2 = &sec_jr2;
		sec_jr3 = &sec_jr3;
		rtic_a = &rtic_a;
		rtic_b = &rtic_b;
		rtic_c = &rtic_c;
		rtic_d = &rtic_d;
		sec_mon = &sec_mon;

		raideng = &raideng;
		raideng_jr0 = &raideng_jr0;
		raideng_jr1 = &raideng_jr1;
		raideng_jr2 = &raideng_jr2;
		raideng_jr3 = &raideng_jr3;

		fman0 = &fman0;
		ethernet0 = &enet3;
		ethernet1 = &enet4;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: PowerPC,e5500@0 {
			device_type = "cpu";
			reg = <0>;
			clocks = <&mux0>;
			next-level-cache = <&L2_0>;
			fsl,portid-mapping = <0x80000000>;
			L2_0: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu1: PowerPC,e5500@1 {
			device_type = "cpu";
			reg = <1>;
			clocks = <&mux1>;
			next-level-cache = <&L2_1>;
			fsl,portid-mapping = <0x40000000>;
			L2_1: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
	};
};

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-17  9:21                                                                                               ` Christian Zigotzky
  2019-01-17  9:31                                                                                                 ` Christoph Hellwig
@ 2019-01-18  8:35                                                                                                 ` Christoph Hellwig
  2019-01-18 11:10                                                                                                   ` Christian Zigotzky
  1 sibling, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-18  8:35 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

Hi Christian,

can you check if the debug printks in this patch trigger?

diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
index 355d16acee6d..e46c9b64ec0d 100644
--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -118,8 +118,11 @@ struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
 			page = NULL;
 		}
 	}
-	if (!page)
+	if (!page) {
 		page = alloc_pages_node(dev_to_node(dev), gfp, page_order);
+		if (!page)
+			pr_warn("failed to allocate memory with gfp 0x%x\n", gfp);
+	}
 
 	if (page && !dma_coherent_ok(dev, page_to_phys(page), size)) {
 		__free_pages(page, page_order);
@@ -139,6 +142,10 @@ struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
 		}
 	}
 
+	if (!page) {
+		pr_warn("failed to allocate DMA memory!\n");
+		dump_stack();
+	}
 	return page;
 }
 

^ permalink raw reply related	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-18  8:35                                                                                                 ` Christoph Hellwig
@ 2019-01-18 11:10                                                                                                   ` Christian Zigotzky
  2019-01-18 11:28                                                                                                     ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-18 11:10 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

For which commit?

-- Christian

On 18 January 2019 at 09:35AM, Christoph Hellwig wrote:
> Hi Christian,
>
> can you check if the debug printks in this patch trigger?
>
> diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
> index 355d16acee6d..e46c9b64ec0d 100644
> --- a/kernel/dma/direct.c
> +++ b/kernel/dma/direct.c
> @@ -118,8 +118,11 @@ struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
>   			page = NULL;
>   		}
>   	}
> -	if (!page)
> +	if (!page) {
>   		page = alloc_pages_node(dev_to_node(dev), gfp, page_order);
> +		if (!page)
> +			pr_warn("failed to allocate memory with gfp 0x%x\n", gfp);
> +	}
>   
>   	if (page && !dma_coherent_ok(dev, page_to_phys(page), size)) {
>   		__free_pages(page, page_order);
> @@ -139,6 +142,10 @@ struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
>   		}
>   	}
>   
> +	if (!page) {
> +		pr_warn("failed to allocate DMA memory!\n");
> +		dump_stack();
> +	}
>   	return page;
>   }
>   
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-18 11:10                                                                                                   ` Christian Zigotzky
@ 2019-01-18 11:28                                                                                                     ` Christoph Hellwig
  2019-01-18 12:07                                                                                                       ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-18 11:28 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Fri, Jan 18, 2019 at 12:10:26PM +0100, Christian Zigotzky wrote:
> For which commit?

On top of 257002094bc5935dd63207a380d9698ab81f0775, that is the first
one you identified as breaking the detection of the SATA disks.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-18 11:28                                                                                                     ` Christoph Hellwig
@ 2019-01-18 12:07                                                                                                       ` Christian Zigotzky
  2019-01-18 12:18                                                                                                         ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-18 12:07 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

git checkout 257002094bc5935dd63207a380d9698ab81f0775


I get the following error message with your patch:

patching file a/kernel/dma/direct.c
Hunk #1 FAILED at 118.
Hunk #2 FAILED at 139.
2 out of 2 hunks FAILED -- saving rejects to file a/kernel/dma/direct.c.rej

-- Christian

On 18 January 2019 at 12:28PM, Christoph Hellwig wrote:
> On Fri, Jan 18, 2019 at 12:10:26PM +0100, Christian Zigotzky wrote:
>> For which commit?
> On top of 257002094bc5935dd63207a380d9698ab81f0775, that is the first
> one you identified as breaking the detection of the SATA disks.
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-18 12:07                                                                                                       ` Christian Zigotzky
@ 2019-01-18 12:18                                                                                                         ` Christoph Hellwig
  2019-01-18 12:46                                                                                                           ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-18 12:18 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Fri, Jan 18, 2019 at 01:07:54PM +0100, Christian Zigotzky wrote:
> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>
> git checkout 257002094bc5935dd63207a380d9698ab81f0775
>
>
> I get the following error message with your patch:

Hmm.  Did I attached the wrong patch?  Here is the one I want and just
applied to that revision:

diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
index 355d16acee6d..e46c9b64ec0d 100644
--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -118,8 +118,11 @@ struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
 			page = NULL;
 		}
 	}
-	if (!page)
+	if (!page) {
 		page = alloc_pages_node(dev_to_node(dev), gfp, page_order);
+		if (!page)
+			pr_warn("failed to allocate memory with gfp 0x%x\n", gfp);
+	}
 
 	if (page && !dma_coherent_ok(dev, page_to_phys(page), size)) {
 		__free_pages(page, page_order);
@@ -139,6 +142,10 @@ struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
 		}
 	}
 
+	if (!page) {
+		pr_warn("failed to allocate DMA memory!\n");
+		dump_stack();
+	}
 	return page;
 }
 

^ permalink raw reply related	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-18 12:18                                                                                                         ` Christoph Hellwig
@ 2019-01-18 12:46                                                                                                           ` Christian Zigotzky
  2019-01-18 12:55                                                                                                             ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-18 12:46 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Sorry, it's not possible to patch 
'257002094bc5935dd63207a380d9698ab81f0775' with your patch. I also tried 
it manually but without any success.

-- Christian

On 18 January 2019 at 1:18PM, Christoph Hellwig wrote:
> On Fri, Jan 18, 2019 at 01:07:54PM +0100, Christian Zigotzky wrote:
>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>
>> git checkout 257002094bc5935dd63207a380d9698ab81f0775
>>
>>
>> I get the following error message with your patch:
> Hmm.  Did I attached the wrong patch?  Here is the one I want and just
> applied to that revision:
>
> diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
> index 355d16acee6d..e46c9b64ec0d 100644
> --- a/kernel/dma/direct.c
> +++ b/kernel/dma/direct.c
> @@ -118,8 +118,11 @@ struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
>   			page = NULL;
>   		}
>   	}
> -	if (!page)
> +	if (!page) {
>   		page = alloc_pages_node(dev_to_node(dev), gfp, page_order);
> +		if (!page)
> +			pr_warn("failed to allocate memory with gfp 0x%x\n", gfp);
> +	}
>   
>   	if (page && !dma_coherent_ok(dev, page_to_phys(page), size)) {
>   		__free_pages(page, page_order);
> @@ -139,6 +142,10 @@ struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
>   		}
>   	}
>   
> +	if (!page) {
> +		pr_warn("failed to allocate DMA memory!\n");
> +		dump_stack();
> +	}
>   	return page;
>   }
>   
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-18 12:46                                                                                                           ` Christian Zigotzky
@ 2019-01-18 12:55                                                                                                             ` Christoph Hellwig
  2019-01-18 15:06                                                                                                               ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-18 12:55 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

[-- Attachment #1: Type: text/plain, Size: 590 bytes --]

On Fri, Jan 18, 2019 at 01:46:46PM +0100, Christian Zigotzky wrote:
> Sorry, it's not possible to patch 
> '257002094bc5935dd63207a380d9698ab81f0775' with your patch. I also tried it 
> manually but without any success.

Weird:

hch@carbon:~/work/linux$ git checkout 257002094bc5935dd63207a380d9698ab81f0775
HEAD is now at 257002094bc5 powerpc/dma: use the dma-direct allocator for coherent platforms
hch@carbon:~/work/linux$ patch -p1 < dbg.diff 
patching file kernel/dma/direct.c

I've pushed the result to

git://git.infradead.org/users/hch/misc.git

as a new powerpc-dma.6-debug branch

[-- Attachment #2: dbg.diff --]
[-- Type: text/x-patch, Size: 746 bytes --]

diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
index 355d16acee6d..e46c9b64ec0d 100644
--- a/kernel/dma/direct.c
+++ b/kernel/dma/direct.c
@@ -118,8 +118,11 @@ struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
 			page = NULL;
 		}
 	}
-	if (!page)
+	if (!page) {
 		page = alloc_pages_node(dev_to_node(dev), gfp, page_order);
+		if (!page)
+			pr_warn("failed to allocate memory with gfp 0x%x\n", gfp);
+	}
 
 	if (page && !dma_coherent_ok(dev, page_to_phys(page), size)) {
 		__free_pages(page, page_order);
@@ -139,6 +142,10 @@ struct page *__dma_direct_alloc_pages(struct device *dev, size_t size,
 		}
 	}
 
+	if (!page) {
+		pr_warn("failed to allocate DMA memory!\n");
+		dump_stack();
+	}
 	return page;
 }
 

^ permalink raw reply related	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-18 12:55                                                                                                             ` Christoph Hellwig
@ 2019-01-18 15:06                                                                                                               ` Christian Zigotzky
  2019-01-19 11:40                                                                                                                 ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-18 15:06 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hello Christoph,

I was able to compile 257002094bc5935dd63207a380d9698ab81f0775 from your 
Git powerpc-dma.6-debug today.

Unfortunately I don't see any error messages (kernel ring buffer) and I 
don't have a RS232 serial null modem cable to get them.

Cheers,
Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-18 15:06                                                                                                               ` Christian Zigotzky
@ 2019-01-19 11:40                                                                                                                 ` Christian Zigotzky
  2019-01-19 11:52                                                                                                                   ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-19 11:40 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

[-- Attachment #1: Type: text/plain, Size: 881 bytes --]

Hi Christoph,

I bought a USB null modem RS-232 serial cable today so I was able to get 
some SATA error messages.

Error messages:

[   13.468538] fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
[   13.475106] fsl-sata ffe220000.sata: failed to start port 0 (errno=-12)
[   13.481736] fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
[   13.488267] fsl-sata ffe221000.sata: failed to start port 0 (errno=-12)

---

errno=-12 = Out of memory

Please find attached the complete serial log.

Cheers,
Christian


On 18 January 2019 at 4:06PM, Christian Zigotzky wrote:
> Hello Christoph,
>
> I was able to compile 257002094bc5935dd63207a380d9698ab81f0775 from 
> your Git powerpc-dma.6-debug today.
>
> Unfortunately I don't see any error messages (kernel ring buffer) and 
> I don't have a RS232 serial null modem cable to get them.
>
> Cheers,
> Christian
>
>


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: PuTTY_serial.log --]
[-- Type: text/x-log; name="PuTTY_serial.log", Size: 35113 bytes --]

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2019.01.19 12:21:05 =~=~=~=~=~=~=~=~=~=~=~=


U-Boot 2014.04 (Oct 17 2016 - 08:22:22)

CPU0:  P5020, Version: 2.0, (0x82200020)
Core:  e5500, Version: 1.2, (0x80240012)
Clock Configuration:
       CPU0:1995 MHz, CPU1:1995 MHz, 
       CCB:798  MHz,
       DDR:665  MHz (1330 MT/s data rate) (Asynchronous), LBC:49.875 MHz
       FMAN1: 498.750 MHz
       QMAN:  399 MHz
       PME:   399 MHz
L1:    D-cache 32 KiB enabled
       I-cache 32 KiB enabled
Reset Configuration Word (RCW):
       00000000: 0c540000 00000000 1e1e0000 00000000
       00000010: 44808c00 ff002000 68000000 45000000
       00000020: 00000000 00000000 00000000 0003000f
       00000030: a0000000 00000000 00000000 00000000
Board: CYRUS
36-bit Addressing
I2C:   ready
SPI:   ready
DRAM:  Initializing....using SPD
Detected UDIMM KHX1600C10D3/4G   
Detected UDIMM KHX1600C10D3/4G   
Not enough bank(chip-select) for CS0+CS1 on controller 0, interleaving disabled!
Not enough bank(chip-select) for CS0+CS1 on controller 1, interleaving disabled!
6 GiB left unmapped
8 GiB (DDR3, 64-bit, CL=9, ECC off)
       DDR Controller Interleaving Mode: cache line

Local Bus Controller Registers
BR0	0xE0001001	OR0	0xFFF00010
BR1	0xE1001001	OR1	0xFFF00010
BR2	0x00000000	OR2	0x00000000
BR3	0x00000000	OR3	0x00000000
BR4	0x00000000	OR4	0x00000000
BR5	0x00000000	OR5	0x00000000
BR6	0x00000000	OR6	0x00000000
BR7	0x00000000	OR7	0x00000000
LBCR	0x40000000	LCRR	0x80010004
L2:    512 KiB enabled
Corenet Platform Cache: 2 MiB enabled
SERDES: bank 2 disabled
MMC:  FSL_SDHC: 0
EEPROM: NXID v0
PCIe1: Root Complex, x4 gen2, regs @ 0xfe200000
  01:00.0     - 1002:9440 - Display controller
PCIe1: Bus 00 - 01
PCIe2: Root Complex, x4 gen2, regs @ 0xfe201000
  03:00.0     - 111d:8092 - Bridge device
   04:01.0    - 111d:8092 - Bridge device
    05:00.0   - 12d8:e111 - Bridge device
     06:04.0  - 10ec:8139 - Network controller
     06:05.0  - 109e:036e - Multimedia device
     06:05.1  - 109e:0878 - Multimedia device
   04:02.0    - 111d:8092 - Bridge device
   04:03.0    - 111d:8092 - Bridge device
   04:08.0    - 111d:8092 - Bridge device
   04:10.0    - 111d:8092 - Bridge device
PCIe2: Bus 02 - 0a
PCIe3: disabled
PCIe4: disabled
Looking for VGA
PINS: 0xfc000808
videoboot: Booting PCI video card bus 1, function 0, device 0
Begin BIOS POST
End BIOS POST
Setting VESA Mode
Found required VESA mode
About to set mode 279
About to get mode
Got mode 49431 (0xc117)
OK
XSize = 1024 YSize = 768 Base =0xe0000000
mmio_base = 0x80000000
bgx = 0xad55ad55 fgx = 0x0
In:    serial
Out:   serial
Err:   serial
ID: NXID v0
SN: 116330018
UID: 442943100191005198d3a080a0800000
Errata: ÿÿÿÿÿ\x15	"\x108
Build date: 2015/09/22 10:38:00 
CRC: d4925668
SCSI:  scanning bus for devices...
Found 0 device(s).
Net:   Initializing Fman

MMC read: dev # 0, block # 1130, count 128 ...
Fman1: Uploading microcode version 106.1.0
Tuning PHY @ 3
Tuning PHY @ 7
FM1@DTSEC4 [PRIME], FM1@DTSEC5

MMC read: dev # 0, block # 1280, count 512 ... 512 blocks read: OK

MMC read: dev # 0, block # 65536, count 131072 ... 131072 blocks read: OK
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 5 USB Device(s) found
USB1:   USB EHCI 1.00
scanning bus 1 for devices... ERROR: Invalid USB EP length (9)
ERROR: Invalid USB EP length (9)
ERROR: Invalid USB EP length (9)
4 USB Device(s) found
Timeout poll on interrupt endpoint
Failed to get keyboard state from device 0c45:5303
SATA0 (3 Gbps)
\r       SATA1 (No RDY)
\rscanning bus for devices...
Found 0 device(s).
X5000> setenv bootargs root=/dev/sda2 console=ttyS0,115200
X5000> load sata 0:1 1000000 uImage-5.0
reading uImage-5.0
10687255 bytes read in 75 ms (135.9 MiB/s)
X5000> iminfo

## Checking Image at 01000000 ...
   Legacy image found
   Image Name:   Linux-5.0.0-rc2-2_A-EON_A1-X5000
   Created:      2019-01-18  14:47:06 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    10687191 Bytes = 10.2 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
X5000> load sata 0:1 2000000 cyrus.dtb
reading cyrus.dtb
29244 bytes read in 27 ms (1 MiB/s)
X5000> bootm 1000000 - 2000000
WARNING: adjusting available memory to 30000000
## Booting kernel from Legacy Image at 01000000 ...
   Image Name:   Linux-5.0.0-rc2-2_A-EON_A1-X5000
   Created:      2019-01-18  14:47:06 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    10687191 Bytes = 10.2 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 02000000
   Booting using the fdt blob at 0x2000000
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 03fe5000, end 03fff23b ... OK
[    0.000000] OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd
[    0.000000] OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr
[    0.000000] OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr
[    0.000000] MMU: Supported page sizes
[    0.000000]          4 KB as direct
[    0.000000]       4096 KB as direct
[    0.000000]      16384 KB as direct
[    0.000000]      65536 KB as direct
[    0.000000]     262144 KB as direct
[    0.000000]    1048576 KB as direct
[    0.000000] MMU: Book3E HW tablewalk not supported
[    0.000000] Linux version 5.0.0-rc2-2_A-EON_A1-X5000-54574-g2570020-dirty (christian@christian-virtual-machine) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4)) #1 SMP Fri Jan 18 15:36:47 CET 2019
[    0.000000] Using CoreNet Generic machine description
[    0.000000] CPU maps initialized for 1 thread per core
[    0.000000] -----------------------------------------------------
[    0.000000] phys_mem_size     = 0x200000000
[    0.000000] dcache_bsize      = 0x40
[    0.000000] icache_bsize      = 0x40
[    0.000000] cpu_features      = 0x00000003008003b4
[    0.000000]   possible        = 0x00000003009003b4
[    0.000000]   always          = 0x00000003008003b4
[    0.000000] cpu_user_features = 0xcc008000 0x08000000
[    0.000000] mmu_features      = 0x000a0010
[    0.000000] firmware_features = 0x0000000000000000
[    0.000000] -----------------------------------------------------
[    0.000000] CoreNet Generic board
[    0.000000] barrier-nospec: using isync; sync as speculation barrier
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000007fffefff]
[    0.000000]   Normal   [mem 0x000000007ffff000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts
[    0.000000] percpu: Embedded 21 pages/cpu @(____ptrval____) s48464 r0 d37552 u524288
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2068479
[    0.000000] Kernel command line: root=/dev/sda2 console=ttyS0,115200
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Memory: 8117692K/8388608K available (12580K kernel code, 2112K rwdata, 8316K rodata, 420K init, 747K bss, 270916K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[    0.000000] mpic: Setting up MPIC " OpenPIC  " version 1.2 at ffe040000, max 2 CPUs
[    0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff
[    0.000000] mpic: Initializing for 512 sources
[    0.000003] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x5c0589001, max_idle_ns: 440795202458 ns
[    0.000007] clocksource: timebase mult[2819aa06] shift[24] registered
[    0.001397] Console: colour dummy device 80x25
[    0.001411] pid_max: default: 32768 minimum: 301
[    0.001498] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.001532] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.002112] e500 family performance monitor hardware support registered
[    0.002155] rcu: Hierarchical SRCU implementation.
[    0.002336] smp: Bringing up secondary CPUs ...
[    0.002742] smp: Brought up 1 node, 2 CPUs
[    0.002745] Using standard scheduler topology
[    0.003251] devtmpfs: initialized
[    0.005271] random: get_random_u32 called from .bucket_table_alloc+0x170/0x1b8 with crng_init=0
[    0.005472] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.005479] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.005541] xor: measuring software checksum speed
[    0.015415]    8regs     :  4124.000 MB/sec
[    0.025436]    8regs_prefetch:  3828.000 MB/sec
[    0.035455]    32regs    :  4384.000 MB/sec
[    0.045477]    32regs_prefetch:  3820.000 MB/sec
[    0.045479] xor: using function: 32regs (4384.000 MB/sec)
[    0.045757] NET: Registered protocol family 16
[    0.046508] cpuidle: using governor ladder
[    0.046543] cpuidle: using governor menu
[    0.051679] Machine: varisys,CYRUS
[    0.051683] SoC family: QorIQ
[    0.051685] SoC ID: svr:0x82200020, Revision: 2.0
[    0.053835] Found FSL PCI host bridge at 0x0000000ffe200000. Firmware bus number: 0->1
[    0.053839] PCI host bridge /pcie@ffe200000  ranges:
[    0.053846]  MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000 
[    0.053850]   IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000
[    0.053874] /pcie@ffe200000: PCICSRBAR @ 0xdf000000
[    0.053877] setup_pci_atmu: end of DRAM 200000000
[    0.053884] /pcie@ffe200000: Setup 64-bit PCI DMA window
[    0.053886] /pcie@ffe200000: DMA window size is 0xdf000000
[    0.054103] Found FSL PCI host bridge at 0x0000000ffe201000. Firmware bus number: 0->8
[    0.054106] PCI host bridge /pcie@ffe201000  ranges:
[    0.054112]  MEM 0x0000000c20000000..0x0000000c3fffffff -> 0x00000000e0000000 
[    0.054116]   IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000
[    0.054128] /pcie@ffe201000: PCICSRBAR @ 0xdf000000
[    0.054131] setup_pci_atmu: end of DRAM 200000000
[    0.054137] /pcie@ffe201000: Setup 64-bit PCI DMA window
[    0.054140] /pcie@ffe201000: DMA window size is 0xdf000000
[    0.055304] software IO TLB: mapped [mem 0xfbfff000-0xfffff000] (64MB)
[    0.055308] PCI: Probing PCI hardware
[    0.055374] fsl-pci ffe200000.pcie: PCI host bridge to bus 0000:00
[    0.055382] pci_bus 0000:00: root bus resource [io  0x8000080000010000-0x800008000001ffff] (bus address [0x0000-0xffff])
[    0.055387] pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff])
[    0.055391] pci_bus 0000:00: root bus resource [bus 00-01]
[    0.057103] pci 0000:01:00.0: enabling Extended Tags
[    0.057163] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:00.0 (capable of 64.000 Gb/s with 5 GT/s x16 link)
[    0.061114] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.061232] fsl-pci ffe201000.pcie: PCI host bridge to bus 1000:00
[    0.061237] pci_bus 1000:00: root bus resource [io  0x8000080000021000-0x8000080000030fff] (bus address [0x0000-0xffff])
[    0.061242] pci_bus 1000:00: root bus resource [mem 0xc20000000-0xc3fffffff] (bus address [0xe0000000-0xffffffff])
[    0.061249] pci_bus 1000:00: root bus resource [bus 00-08]
[    0.062895] pci 1000:01:00.0: enabling Extended Tags
[    0.067165] pci 1000:00:00.0: PCI bridge to [bus 01-ff]
[    0.067402] pci 1000:02:01.0: enabling Extended Tags
[    0.067744] pci 1000:02:02.0: enabling Extended Tags
[    0.068092] pci 1000:02:03.0: enabling Extended Tags
[    0.068607] pci 1000:02:08.0: enabling Extended Tags
[    0.069241] pci 1000:02:10.0: enabling Extended Tags
[    0.070106] pci 1000:01:00.0: PCI bridge to [bus 02-ff]
[    0.070355] pci 1000:03:00.0: enabling Extended Tags
[    0.075248] pci 1000:02:01.0: PCI bridge to [bus 03-ff]
[    0.075355] pci_bus 1000:04: extended config space not accessible
[    0.077511] pci 1000:03:00.0: PCI bridge to [bus 04-ff]
[    0.078976] pci 1000:02:02.0: PCI bridge to [bus 05-ff]
[    0.080397] pci 1000:02:03.0: PCI bridge to [bus 06-ff]
[    0.081817] pci 1000:02:08.0: PCI bridge to [bus 07-ff]
[    0.083233] pci 1000:02:10.0: PCI bridge to [bus 08-ff]
[    0.083290] PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
[    0.083297] PCI: Cannot allocate resource region 0 of device 1000:00:00.0, will remap
[    0.083374] pci 0000:00:00.0: BAR 0: no space for [mem size 0x01000000]
[    0.083378] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x01000000]
[    0.083384] pci 0000:01:00.0: BAR 6: assigned [mem 0xc10020000-0xc1003ffff pref]
[    0.083388] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.083393] pci 0000:00:00.0:   bridge window [io  0x8000080000010000-0x800008000001ffff]
[    0.083398] pci 0000:00:00.0:   bridge window [mem 0xc00000000-0xc1fffffff]
[    0.083404] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.083498] pci 1000:00:00.0: BAR 0: no space for [mem size 0x01000000]
[    0.083502] pci 1000:00:00.0: BAR 0: failed to assign [mem size 0x01000000]
[    0.083508] pci 1000:03:00.0: PCI bridge to [bus 04]
[    0.083514] pci 1000:03:00.0:   bridge window [io  0x8000080000022000-0x8000080000022fff]
[    0.083518] pci 1000:03:00.0:   bridge window [mem 0xc20000000-0xc200fffff]
[    0.083525] pci 1000:02:01.0: PCI bridge to [bus 03-04]
[    0.083531] pci 1000:02:01.0:   bridge window [io  0x8000080000022000-0x8000080000022fff]
[    0.083536] pci 1000:02:01.0:   bridge window [mem 0xc20000000-0xc200fffff]
[    0.083545] pci 1000:02:02.0: PCI bridge to [bus 05]
[    0.083561] pci 1000:02:03.0: PCI bridge to [bus 06]
[    0.083576] pci 1000:02:08.0: PCI bridge to [bus 07]
[    0.083592] pci 1000:02:10.0: PCI bridge to [bus 08]
[    0.083607] pci 1000:01:00.0: PCI bridge to [bus 02-08]
[    0.083614] pci 1000:01:00.0:   bridge window [io  0x8000080000022000-0x8000080000022fff]
[    0.083619] pci 1000:01:00.0:   bridge window [mem 0xc20000000-0xc200fffff]
[    0.083629] pci 1000:00:00.0: PCI bridge to [bus 01-08]
[    0.083635] pci 1000:00:00.0:   bridge window [io  0x8000080000021000-0x8000080000030fff]
[    0.083639] pci 1000:00:00.0:   bridge window [mem 0xc20000000-0xc3fffffff]
[    0.083644] pci_bus 1000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.084879] Setting up RapidIO peer-to-peer network /rapidio@ffe0c0000
[    0.084887] fsl-of-rio ffe0c0000.rapidio: Of-device full name /rapidio@ffe0c0000
[    0.084891] fsl-of-rio ffe0c0000.rapidio: Regs: [mem 0xffe0c0000-0xffe0d0fff]
[    0.084898] fsl-of-rio ffe0c0000.rapidio: No valid fsl,srio-rmu-handle property
[    0.084910] fsl-of-rio: probe of ffe0c0000.rapidio failed with error -2
[    0.118800] raid6: int64x1  gen()   695 MB/s
[    0.135848] raid6: int64x1  xor()   693 MB/s
[    0.152878] raid6: int64x2  gen()  1132 MB/s
[    0.169899] raid6: int64x2  xor()   908 MB/s
[    0.186912] raid6: int64x4  gen()  1351 MB/s
[    0.203956] raid6: int64x4  xor()   964 MB/s
[    0.220982] raid6: int64x8  gen()  1183 MB/s
[    0.238011] raid6: int64x8  xor()   833 MB/s
[    0.238014] raid6: using algorithm int64x4 gen() 1351 MB/s
[    0.238016] raid6: .... xor() 964 MB/s, rmw enabled
[    0.238018] raid6: using intx1 recovery algorithm
[    0.238087] Freescale Elo series DMA driver
[    0.238311] fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28
[    0.238350] fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29
[    0.238388] fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30
[    0.238428] fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31
[    0.238655] fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32
[    0.238693] fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33
[    0.238733] fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34
[    0.238772] fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35
[    0.239287] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.239304] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.239309] pci 0000:01:00.0: vgaarb: setting as boot device (VGA legacy resources not available)
[    0.239311] vgaarb: loaded
[    0.239466] SCSI subsystem initialized
[    0.239685] usbcore: registered new interface driver usbfs
[    0.239709] usbcore: registered new interface driver hub
[    0.239731] usbcore: registered new device driver usb
[    0.239826] pps_core: LinuxPPS API ver. 1 registered
[    0.239829] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.239839] PTP clock support registered
[    0.240048] EDAC MC: Ver: 3.0.0
[    0.240675] Advanced Linux Sound Architecture Driver Initialized.
[    0.240920] NET: Registered protocol family 8
[    0.240923] NET: Registered protocol family 20
[    0.241198] clocksource: Switched to clocksource timebase
[    0.241287] FS-Cache: Loaded
[    0.241345] CacheFiles: Loaded
[    0.245992] NET: Registered protocol family 2
[    0.246271] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.246324] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.246634] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.247286] TCP: Hash tables configured (established 65536 bind 65536)
[    0.247374] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.247463] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.247630] NET: Registered protocol family 1
[    0.247844] RPC: Registered named UNIX socket transport module.
[    0.247848] RPC: Registered udp transport module.
[    0.247850] RPC: Registered tcp transport module.
[    0.247852] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.248831] Initialise system trusted keyrings
[    0.248977] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[    0.252387] zbud: loaded
[    0.253120] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.253934] ntfs: driver 2.1.32 [Flags: R/W].
[    0.254057] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.254302] fuse init (API version 7.28)
[    0.260983] NET: Registered protocol family 38
[    0.261008] async_tx: api initialized (async)
[    0.261013] Key type asymmetric registered
[    0.261016] Asymmetric key parser 'x509' registered
[    0.261047] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.261051] io scheduler mq-deadline registered
[    0.261054] io scheduler kyber registered
[    0.262144] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    0.262147] crc32: self tests passed, processed 225944 bytes in 509795 nsec
[    0.262685] crc32c: CRC_LE_BITS = 64
[    0.262688] crc32c: self tests passed, processed 225944 bytes in 258927 nsec
[    0.297559] crc32_combine: 8373 self tests passed
[    0.333092] crc32c_combine: 8373 self tests passed
[    0.333564] pcieport 0000:00:00.0: Signaling PME with IRQ 482
[    0.333674] aer 0000:00:00.0:pcie002: AER enabled with IRQ 482
[    0.333791] pcieport 1000:00:00.0: Signaling PME with IRQ 481
[    0.333924] aer 1000:00:00.0:pcie002: AER enabled with IRQ 481
[    0.339947] bman_portal ff4000000.bman-portal: Portal initialised, cpu 0
[    0.339998] bman_portal ff4004000.bman-portal: Portal initialised, cpu 1
[    0.340437] qman_portal ff4200000.qman-portal: Portal initialised, cpu 0
[    0.340557] qman_portal ff4204000.qman-portal: Portal initialised, cpu 1
[    0.362499] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.363201] printk: console [ttyS0] disabled
[    0.363228] serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 24937500) is a 16550A
[    1.740554] printk: console [ttyS0] enabled
[    1.744996] serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 24937500) is a 16550A
[    1.754002] serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 24937500) is a 16550A
[    1.763023] serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 24937500) is a 16550A
[    1.771981] ePAPR hypervisor byte channel driver
[    1.776864] [drm] radeon kernel modesetting enabled.
[    1.782082] [drm] initializing kernel modesetting (RV770 0x1002:0x9440 0x106B:0x00B2 0x00).
[    2.103187] ATOM BIOS: Wekiva
[    2.106196] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    2.114870] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[    2.122501] [drm] Detected VRAM RAM=512M, BAR=256M
[    2.127274] [drm] RAM width 256bits DDR
[    2.131178] [TTM] Zone  kernel: Available graphics memory: 4058846 kiB
[    2.137689] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.144196] [TTM] Initializing pool allocator
[    2.148545] [TTM] Initializing DMA pool allocator
[    2.153261] [drm] radeon: 512M of VRAM memory ready
[    2.158125] [drm] radeon: 1024M of GTT memory ready.
[    2.163085] [drm] Loading RV770 Microcode
[    2.167108] [drm] Internal thermal controller with fan control
[    2.172974] [drm] radeon: power management initialized
[    2.178139] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    2.186388] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    2.222626] [drm] PCIE GART of 1024M enabled (table at 0x0000000000146000).
[    2.229633] radeon 0000:01:00.0: WB enabled
[    2.233812] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x(____ptrval____)
[    2.244564] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x(____ptrval____)
[    2.257215] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000056230 and cpu addr 0x(____ptrval____)
[    2.267966] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.274558] [drm] Driver supports precise vblank timestamp query.
[    2.280630] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    2.286513] radeon 0000:01:00.0: radeon: using MSI.
[    2.291400] [drm] radeon: irq initialized.
[    2.340331] [drm] ring test on 0 succeeded in 1 usecs
[    2.345369] [drm] ring test on 3 succeeded in 2 usecs
[    3.482323] [drm:.uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[    4.472193] [drm:.uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[    5.462066] [drm:.uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[    6.451940] [drm:.uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[    7.441817] [drm:.uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[    8.431691] [drm:.uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[    9.421565] [drm:.uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   10.411442] [drm:.uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   11.401316] [drm:.uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   12.391193] [drm:.uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   12.418597] [drm:.uvd_v1_0_start] *ERROR* UVD not responding, giving up!!!
[   12.425453] radeon 0000:01:00.0: failed initializing UVD (-1).
[   12.431467] [drm] ib test on ring 0 succeeded in 0 usecs
[   12.436782] [drm] ib test on ring 3 succeeded in 0 usecs
[   12.442523] [drm] Radeon Display Connectors
[   12.446692] [drm] Connector 0:
[   12.449732] [drm]   DVI-I-1
[   12.452512] [drm]   HPD1
[   12.455033] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[   12.462404] [drm]   Encoders:
[   12.465358] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   12.469958] [drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[   12.474644] [drm] Connector 1:
[   12.477684] [drm]   DP-1
[   12.480203] [drm]   HPD2
[   12.482724] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[   12.490095] [drm]   Encoders:
[   12.493048] [drm]     DFP1: INTERNAL_UNIPHY
[   12.574505] [drm] fb mappable at 0xC00347000
[   12.578759] [drm] vram apper at 0xC00000000
[   12.582924] [drm] size 7680000
[   12.585963] [drm] fb depth is 24
[   12.589176] [drm]    pitch is 6400
[   12.625425] Console: switching to colour frame buffer device 200x75
[   12.654426] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   12.660886] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[   12.671750] brd: module loaded
[   12.677664] loop: module loaded
[   12.681010] zram: Added device: zram0
[   13.468538] fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
[   13.475106] fsl-sata ffe220000.sata: failed to start port 0 (errno=-12)
[   13.481736] fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
[   13.488267] fsl-sata ffe221000.sata: failed to start port 0 (errno=-12)
[   13.495807] fsl_espi ffe110000.spi: at 0x(____ptrval____) (irq = 53)
[   13.502870] libphy: Fixed MDIO Bus: probed
[   13.508871] libphy: Freescale PowerQUICC MII Bus: probed
[   13.514858] libphy: Freescale PowerQUICC MII Bus: probed
[   13.520705] libphy: Freescale PowerQUICC MII Bus: probed
[   13.526537] libphy: Freescale PowerQUICC MII Bus: probed
[   13.532494] libphy: Freescale PowerQUICC MII Bus: probed
[   13.538479] libphy: Freescale XGMAC MDIO Bus: probed
[   13.548415] fsl_dpaa_mac ffe4e0000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e0000) failed
[   13.558659] fsl_dpaa_mac: probe of ffe4e0000.ethernet failed with error -22
[   13.565637] fsl_dpaa_mac ffe4e2000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e2000) failed
[   13.575874] fsl_dpaa_mac: probe of ffe4e2000.ethernet failed with error -22
[   13.582851] fsl_dpaa_mac ffe4e4000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e4000) failed
[   13.593088] fsl_dpaa_mac: probe of ffe4e4000.ethernet failed with error -22
[   13.600066] fsl_dpaa_mac ffe4e6000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e6000) failed
[   13.610303] fsl_dpaa_mac: probe of ffe4e6000.ethernet failed with error -22
[   13.617281] fsl_dpaa_mac ffe4e8000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e8000) failed
[   13.627518] fsl_dpaa_mac: probe of ffe4e8000.ethernet failed with error -22
[   13.634495] fsl_dpaa_mac ffe4f0000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@f0000) failed
[   13.644732] fsl_dpaa_mac: probe of ffe4f0000.ethernet failed with error -22
[   13.651729] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   13.658755] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   13.664517] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   13.670330] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   13.676275] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   13.683130] 8139cp 1000:04:04.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[   13.692704] 8139too: 8139too Fast Ethernet driver 0.9.28
[   13.699026] 8139too 1000:04:04.0 eth0: RealTek RTL8139 at 0x(____ptrval____), 00:50:fc:cb:51:81, IRQ 17
[   13.708462] PPP generic driver version 2.4.2
[   13.712804] PPP BSD Compression module registered
[   13.717495] PPP Deflate Compression module registered
[   13.722541] PPP MPPE Compression module registered
[   13.727315] NET: Registered protocol family 24
[   13.731846] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.738470] ehci-pci: EHCI PCI platform driver
[   13.742927] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.749246] ohci-pci: OHCI PCI platform driver
[   13.754299] ehci-fsl: Freescale EHCI Host controller driver
[   13.759902] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[   13.766558] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[   13.773772] fsl-ehci fsl-ehci.0: can't setup: -12
[   13.778463] fsl-ehci fsl-ehci.0: USB bus 1 deregistered
[   13.783749] fsl-ehci fsl-ehci.0: init fsl-ehci.0 fail, -12
[   13.789225] fsl-ehci: probe of fsl-ehci.0 failed with error -12
[   13.795137] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[   13.801781] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 1
[   13.808989] fsl-ehci fsl-ehci.1: can't setup: -12
[   13.813680] fsl-ehci fsl-ehci.1: USB bus 1 deregistered
[   13.818945] fsl-ehci fsl-ehci.1: init fsl-ehci.1 fail, -12
[   13.824419] fsl-ehci: probe of fsl-ehci.1 failed with error -12
[   13.830353] usbcore: registered new interface driver usblp
[   13.835841] usbcore: registered new interface driver usb-storage
[   13.841865] usbcore: registered new interface driver usbserial_generic
[   13.848385] usbserial: USB Serial support registered for generic
[   13.854386] usbcore: registered new interface driver ftdi_sio
[   13.860126] usbserial: USB Serial support registered for FTDI USB Serial Device
[   13.867799] mousedev: PS/2 mouse device common for all mice
[   13.873460] i2c /dev entries driver
[   13.877394] mpc-i2c ffe118100.i2c: timeout 1000000 us
[   13.882575] mpc-i2c ffe119100.i2c: timeout 1000000 us
[   13.889730] rtc-ds1307 7-006f: registered as rtc0
[   13.894571] mpc-i2c ffe118000.i2c: timeout 1000000 us
[   13.899732] mpc-i2c ffe119000.i2c: timeout 1000000 us
[   13.905228] ptp_qoriq: device tree node missing required elements, try automatic configuration
[   13.913814] ptp_qoriq: error reference clock value, or lower than 100MHz
[   13.920497] ptp_qoriq: probe of ffe4fe000.ptp-timer failed with error -22
[   13.927991] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[   13.936617] sdhci: Secure Digital Host Controller Interface driver
[   13.942777] sdhci: Copyright(c) Pierre Ossman
[   13.947165] sdhci-pltfm: SDHCI platform and OF driver helper
[   13.953024] mmc0: Unable to allocate ADMA buffers - falling back to standard DMA
[   13.960506] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[   13.993152] mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using DMA
[   14.000635] ledtrig-cpu: registered to indicate activity on CPUs
[   14.006688] hidraw: raw HID events driver (C) Jiri Kosina
[   14.012449] usbcore: registered new interface driver usbhid
[   14.018004] usbhid: USB HID core driver
[   14.021935] Freescale hypervisor management driver
[   14.026714] fsl-hv: no hypervisor found
[   14.032306] usbcore: registered new interface driver snd-usb-audio
[   14.038493] usbcore: registered new interface driver snd-ua101
[   14.044329] usbcore: registered new interface driver snd-usb-usx2y
[   14.050595] ipip: IPv4 and MPLS over IPv4 tunneling driver
[   14.056280] IPv4 over IPsec tunneling driver
[   14.060705] Initializing XFRM netlink socket
[   14.065244] NET: Registered protocol family 10
[   14.070224] Segment Routing with IPv6
[   14.073922] mip6: Mobile IPv6
[   14.077131] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[   14.083448] NET: Registered protocol family 17
[   14.087884] NET: Registered protocol family 15
[   14.092342] lec:lane_module_init: lec.c: initialized
[   14.097297] mpoa:atm_mpoa_init: mpc.c: initialized
[   14.102082] l2tp_core: L2TP core driver, V2.0
[   14.118179] DCCP: Activated CCID 2 (TCP-like)
[   14.122560] DCCP: Activated CCID 3 (TCP-Friendly Rate Control)
[   14.128650] sctp: Hash tables configured (bind 256/256)
[   14.134142] NET: Registered protocol family 21
[   14.138655] Registered RDS/tcp transport
[   14.142568] tipc: Activated (version 2.0.0)
[   14.146767] NET: Registered protocol family 30
[   14.151245] tipc: Started in single node mode
[   14.155991] Key type dns_resolver registered
[   14.160413] batman_adv: B.A.T.M.A.N. advanced 2019.0 (compatibility version 15) loaded
[   14.168458] drmem: No dynamic reconfiguration memory found
[   14.174152] Loading compiled-in X.509 certificates
[   14.178999] zswap: loaded using pool lzo/zbud
[   14.183926] Btrfs loaded, crc32c=crc32c-generic
[   14.188802] Key type encrypted registered
[   14.194270] rtc-ds1307 7-006f: setting system clock to 2019-01-19 11:24:12 UTC (1547897052)
[   14.202820] ALSA device list:
[   14.205784]   #0: Virtual MIDI Card 1
[   14.209774] md: Waiting for all devices to be available before autodetect
[   14.216553] md: If you don't use raid, use raid=noautodetect
[   14.222451] md: Autodetecting RAID arrays.
[   14.226539] md: autorun ...
[   14.229321] md: ... autorun DONE.
[   14.232751] VFS: Cannot open root device "sda2" or unknown-block(0,0): error -6
[   14.240048] Please append a correct "root=" boot option; here are the available partitions:
[   14.248379] 0100          131072 ram0 
[   14.248380]  (driver?)
[   14.254460] 0101          131072 ram1 
[   14.254461]  (driver?)
[   14.260541] 0102          131072 ram2 
[   14.260542]  (driver?)
[   14.266620] 0103          131072 ram3 
[   14.266621]  (driver?)
[   14.272700] 0104          131072 ram4 
[   14.272701]  (driver?)
[   14.278780] 0105          131072 ram5 
[   14.278781]  (driver?)
[   14.284859] 0106          131072 ram6 
[   14.284860]  (driver?)
[   14.290939] 0107          131072 ram7 
[   14.290940]  (driver?)
[   14.297018] 0108          131072 ram8 
[   14.297019]  (driver?)
[   14.303099] 0109          131072 ram9 
[   14.303100]  (driver?)
[   14.309178] 010a          131072 ram10 
[   14.309179]  (driver?)
[   14.315344] 010b          131072 ram11 
[   14.315345]  (driver?)
[   14.321510] 010c          131072 ram12 
[   14.321510]  (driver?)
[   14.327676] 010d          131072 ram13 
[   14.327676]  (driver?)
[   14.333841] 010e          131072 ram14 
[   14.333842]  (driver?)
[   14.340007] 010f          131072 ram15 
[   14.340008]  (driver?)
[   14.346176] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[   14.354419] Rebooting in 180 seconds..

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-19 11:40                                                                                                                 ` Christian Zigotzky
@ 2019-01-19 11:52                                                                                                                   ` Christian Zigotzky
  2019-01-19 13:02                                                                                                                     ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-19 11:52 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hi Christoph,

I have found a small workaround. If I add 'mem=3500M' to the boot 
arguments then it detects the SATA hard disk and boots without any problems.

X5000> setenv bootargs root=/dev/sda2 console=ttyS0,115200 mem=3500M

Cheers,
Christian


On 19 January 2019 at 12:40PM, Christian Zigotzky wrote:
> Hi Christoph,
>
> I bought a USB null modem RS-232 serial cable today so I was able to 
> get some SATA error messages.
>
> Error messages:
>
> [   13.468538] fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
> [   13.475106] fsl-sata ffe220000.sata: failed to start port 0 
> (errno=-12)
> [   13.481736] fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
> [   13.488267] fsl-sata ffe221000.sata: failed to start port 0 
> (errno=-12)
>
> ---
>
> errno=-12 = Out of memory
>
> Please find attached the complete serial log.
>
> Cheers,
> Christian
>
>
> On 18 January 2019 at 4:06PM, Christian Zigotzky wrote:
>> Hello Christoph,
>>
>> I was able to compile 257002094bc5935dd63207a380d9698ab81f0775 from 
>> your Git powerpc-dma.6-debug today.
>>
>> Unfortunately I don't see any error messages (kernel ring buffer) and 
>> I don't have a RS232 serial null modem cable to get them.
>>
>> Cheers,
>> Christian
>>
>>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-19 11:52                                                                                                                   ` Christian Zigotzky
@ 2019-01-19 13:02                                                                                                                     ` Christoph Hellwig
  2019-01-19 14:04                                                                                                                       ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-19 13:02 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Sat, Jan 19, 2019 at 12:52:52PM +0100, Christian Zigotzky wrote:
> Hi Christoph,
>
> I have found a small workaround. If I add 'mem=3500M' to the boot arguments 
> then it detects the SATA hard disk and boots without any problems.
>
> X5000> setenv bootargs root=/dev/sda2 console=ttyS0,115200 mem=3500M

Interesting.  This suggest it is related to the use of ZONE_DMA by
the FSL SOCs that your board uses.  Let me investigate this a bit more.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-19 13:02                                                                                                                     ` Christoph Hellwig
@ 2019-01-19 14:04                                                                                                                       ` Christoph Hellwig
  2019-01-21 14:38                                                                                                                         ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-19 14:04 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Sat, Jan 19, 2019 at 02:02:22PM +0100, Christoph Hellwig wrote:
> Interesting.  This suggest it is related to the use of ZONE_DMA by
> the FSL SOCs that your board uses.  Let me investigate this a bit more.

As a hack to check that theory I've pushed a new commit to the
powerpc-dma.6-debug branch to use old powerpc GFP_DMA selection
with the new dma direct code:

http://git.infradead.org/users/hch/misc.git/commitdiff/5c532d07c2f3c3972104de505d06b8d85f403f06

And another one that drops the addressability checks that powerpc
never had:

http://git.infradead.org/users/hch/misc.git/commitdiff/18e7629b38465ca98f8e7eed639123a13ac3b669

Can you first test with both patches, and then just with the first
in case that worked?


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-19 14:04                                                                                                                       ` Christoph Hellwig
@ 2019-01-21 14:38                                                                                                                         ` Christian Zigotzky
  2019-01-23 14:34                                                                                                                           ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-21 14:38 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hello Christoph,

Thanks for your reply. I successfully compiled a kernel (uImage) for the 
X5000 from your Git 'powerpc-dma.6-debug' (both patches) today.

It detects the SATA hard disk drive and boots without any problems. I 
will test the first patch in next days.

Thanks for your help,

Christian


On 19 January 2019 at 3:04PM, Christoph Hellwig wrote:
> On Sat, Jan 19, 2019 at 02:02:22PM +0100, Christoph Hellwig wrote:
>> Interesting.  This suggest it is related to the use of ZONE_DMA by
>> the FSL SOCs that your board uses.  Let me investigate this a bit more.
> As a hack to check that theory I've pushed a new commit to the
> powerpc-dma.6-debug branch to use old powerpc GFP_DMA selection
> with the new dma direct code:
>
> http://git.infradead.org/users/hch/misc.git/commitdiff/5c532d07c2f3c3972104de505d06b8d85f403f06
>
> And another one that drops the addressability checks that powerpc
> never had:
>
> http://git.infradead.org/users/hch/misc.git/commitdiff/18e7629b38465ca98f8e7eed639123a13ac3b669
>
> Can you first test with both patches, and then just with the first
> in case that worked?
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-21 14:38                                                                                                                         ` Christian Zigotzky
@ 2019-01-23 14:34                                                                                                                           ` Christian Zigotzky
  2019-01-25 13:37                                                                                                                             ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-23 14:34 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hi Christoph,

I also compiled a kernel (zImage) for the X1000  from your Git 
'powerpc-dma.6-debug' (both patches) today.

It boots and the P.A. Semi Ethernet works!

I will test just the first patch tomorrow.

Thanks,
Christian


On 21 January 2019 at 3:38PM, Christian Zigotzky wrote:
> Hello Christoph,
>
> Thanks for your reply. I successfully compiled a kernel (uImage) for 
> the X5000 from your Git 'powerpc-dma.6-debug' (both patches) today.
>
> It detects the SATA hard disk drive and boots without any problems.
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-23 14:34                                                                                                                           ` Christian Zigotzky
@ 2019-01-25 13:37                                                                                                                             ` Christian Zigotzky
  2019-01-27 13:13                                                                                                                               ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-25 13:37 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Next step just with the first patch: 
5c532d07c2f3c3972104de505d06b8d85f403f06 (use powerpc zone selection)

git clone git://git.infradead.org/users/hch/misc.git -b 
powerpc-dma.6-debug a

git checkout 5c532d07c2f3c3972104de505d06b8d85f403f06

Link to the Git: 
http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6-debug

Results:

X5000: The kernel detects the SATA hard disk drive and boots without any 
problems.

X1000: The kernel boots and the P.A. Semi Ethernet works!

-- Christian


On 23 January 2019 at 3:34PM, Christian Zigotzky wrote:
> Hi Christoph,
>
> I also compiled a kernel (zImage) for the X1000  from your Git 
> 'powerpc-dma.6-debug' (both patches) today.
>
> It boots and the P.A. Semi Ethernet works!
>
> I will test just the first patch tomorrow.
>
> Thanks,
> Christian
>
>
> On 21 January 2019 at 3:38PM, Christian Zigotzky wrote:
>> Hello Christoph,
>>
>> Thanks for your reply. I successfully compiled a kernel (uImage) for 
>> the X5000 from your Git 'powerpc-dma.6-debug' (both patches) today.
>>
>> It detects the SATA hard disk drive and boots without any problems.
>>
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-25 13:37                                                                                                                             ` Christian Zigotzky
@ 2019-01-27 13:13                                                                                                                               ` Christian Zigotzky
  2019-01-28  7:04                                                                                                                                 ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-27 13:13 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Christoph,

What shall I do next?

Cheers,
Christian


On 25 January 2019 at 2:37PM, Christian Zigotzky wrote:
> Next step just with the first patch: 
> 5c532d07c2f3c3972104de505d06b8d85f403f06 (use powerpc zone selection)
>
> git clone git://git.infradead.org/users/hch/misc.git -b 
> powerpc-dma.6-debug a
>
> git checkout 5c532d07c2f3c3972104de505d06b8d85f403f06
>
> Link to the Git: 
> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6-debug
>
> Results:
>
> X5000: The kernel detects the SATA hard disk drive and boots without 
> any problems.
>
> X1000: The kernel boots and the P.A. Semi Ethernet works!
>
> -- Christian
>
>
> On 23 January 2019 at 3:34PM, Christian Zigotzky wrote:
>> Hi Christoph,
>>
>> I also compiled a kernel (zImage) for the X1000  from your Git 
>> 'powerpc-dma.6-debug' (both patches) today.
>>
>> It boots and the P.A. Semi Ethernet works!
>>
>> I will test just the first patch tomorrow.
>>
>> Thanks,
>> Christian
>>
>>
>> On 21 January 2019 at 3:38PM, Christian Zigotzky wrote:
>>> Hello Christoph,
>>>
>>> Thanks for your reply. I successfully compiled a kernel (uImage) for 
>>> the X5000 from your Git 'powerpc-dma.6-debug' (both patches) today.
>>>
>>> It detects the SATA hard disk drive and boots without any problems.
>>>
>>
>>
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-27 13:13                                                                                                                               ` Christian Zigotzky
@ 2019-01-28  7:04                                                                                                                                 ` Christoph Hellwig
  2019-01-28 16:22                                                                                                                                   ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-28  7:04 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Sun, Jan 27, 2019 at 02:13:09PM +0100, Christian Zigotzky wrote:
> Christoph,
>
> What shall I do next?

I'll need to figure out what went wrong with the new zone selection
on powerpc and give you another branch to test.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-28  7:04                                                                                                                                 ` Christoph Hellwig
@ 2019-01-28 16:22                                                                                                                                   ` Christoph Hellwig
  2019-01-28 16:52                                                                                                                                     ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-28 16:22 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Mon, Jan 28, 2019 at 08:04:22AM +0100, Christoph Hellwig wrote:
> On Sun, Jan 27, 2019 at 02:13:09PM +0100, Christian Zigotzky wrote:
> > Christoph,
> >
> > What shall I do next?
> 
> I'll need to figure out what went wrong with the new zone selection
> on powerpc and give you another branch to test.

Can you try the new powerpc-dma.6-debug.2 branch:

    git://git.infradead.org/users/hch/misc.git powerpc-dma.6-debug.2

Gitweb:

    http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6-debug.2

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-28 16:22                                                                                                                                   ` Christoph Hellwig
@ 2019-01-28 16:52                                                                                                                                     ` Christian Zigotzky
  2019-01-29 15:03                                                                                                                                       ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-28 16:52 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Thanks a lot! I will test it tomorrow.

— Christian

Sent from my iPhone

> On 28. Jan 2019, at 17:22, Christoph Hellwig <hch@lst.de> wrote:
> 
>> On Mon, Jan 28, 2019 at 08:04:22AM +0100, Christoph Hellwig wrote:
>>> On Sun, Jan 27, 2019 at 02:13:09PM +0100, Christian Zigotzky wrote:
>>> Christoph,
>>> 
>>> What shall I do next?
>> 
>> I'll need to figure out what went wrong with the new zone selection
>> on powerpc and give you another branch to test.
> 
> Can you try the new powerpc-dma.6-debug.2 branch:
> 
>    git://git.infradead.org/users/hch/misc.git powerpc-dma.6-debug.2
> 
> Gitweb:
> 
>    http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6-debug.2


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-28 16:52                                                                                                                                     ` Christian Zigotzky
@ 2019-01-29 15:03                                                                                                                                       ` Christian Zigotzky
  2019-01-29 16:14                                                                                                                                         ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-29 15:03 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hi Christoph,

I compiled kernels for the X5000 and X1000 from your new branch 
'powerpc-dma.6-debug.2' today. The kernels boot and the P.A. Semi 
Ethernet works!

Cheers,
Christian


On 28 January 2019 at 5:52PM, Christian Zigotzky wrote:
> Thanks a lot! I will test it tomorrow.
>
> — Christian
>
> Sent from my iPhone
>
>> On 28. Jan 2019, at 17:22, Christoph Hellwig <hch@lst.de> wrote:
>>
>>> On Mon, Jan 28, 2019 at 08:04:22AM +0100, Christoph Hellwig wrote:
>>>> On Sun, Jan 27, 2019 at 02:13:09PM +0100, Christian Zigotzky wrote:
>>>> Christoph,
>>>>
>>>> What shall I do next?
>>> I'll need to figure out what went wrong with the new zone selection
>>> on powerpc and give you another branch to test.
>> Can you try the new powerpc-dma.6-debug.2 branch:
>>
>>     git://git.infradead.org/users/hch/misc.git powerpc-dma.6-debug.2
>>
>> Gitweb:
>>
>>     http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6-debug.2
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-29 15:03                                                                                                                                       ` Christian Zigotzky
@ 2019-01-29 16:14                                                                                                                                         ` Christoph Hellwig
  2019-01-29 16:34                                                                                                                                           ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-29 16:14 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Tue, Jan 29, 2019 at 04:03:32PM +0100, Christian Zigotzky wrote:
> Hi Christoph,
>
> I compiled kernels for the X5000 and X1000 from your new branch 
> 'powerpc-dma.6-debug.2' today. The kernels boot and the P.A. Semi Ethernet 
> works!

Thanks for testing!  I'll prepare a new series that adds the other
patches on top of this one.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-29 16:14                                                                                                                                         ` Christoph Hellwig
@ 2019-01-29 16:34                                                                                                                                           ` Christoph Hellwig
  2019-01-30  4:40                                                                                                                                             ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-01-29 16:34 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Tue, Jan 29, 2019 at 05:14:11PM +0100, Christoph Hellwig wrote:
> On Tue, Jan 29, 2019 at 04:03:32PM +0100, Christian Zigotzky wrote:
> > Hi Christoph,
> >
> > I compiled kernels for the X5000 and X1000 from your new branch 
> > 'powerpc-dma.6-debug.2' today. The kernels boot and the P.A. Semi Ethernet 
> > works!
> 
> Thanks for testing!  I'll prepare a new series that adds the other
> patches on top of this one.

And that was easier than I thought - we just had a few patches left
in powerpc-dma.6, so I've rebased that branch on top of
powerpc-dma.6-debug.2:

    git://git.infradead.org/users/hch/misc.git powerpc-dma.6

Gitweb:

    http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6

I hope the other patches are simple enough, so just testing the full
branch checkout should be fine for now.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-29 16:34                                                                                                                                           ` Christoph Hellwig
@ 2019-01-30  4:40                                                                                                                                             ` Christian Zigotzky
  2019-01-31 12:48                                                                                                                                               ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-30  4:40 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hi Christoph,

Thanks a lot for the updates. I will test the full branch tomorrow.

Cheers,
Christian

Sent from my iPhone

> On 29. Jan 2019, at 17:34, Christoph Hellwig <hch@lst.de> wrote:
> 
>> On Tue, Jan 29, 2019 at 05:14:11PM +0100, Christoph Hellwig wrote:
>>> On Tue, Jan 29, 2019 at 04:03:32PM +0100, Christian Zigotzky wrote:
>>> Hi Christoph,
>>> 
>>> I compiled kernels for the X5000 and X1000 from your new branch 
>>> 'powerpc-dma.6-debug.2' today. The kernels boot and the P.A. Semi Ethernet 
>>> works!
>> 
>> Thanks for testing!  I'll prepare a new series that adds the other
>> patches on top of this one.
> 
> And that was easier than I thought - we just had a few patches left
> in powerpc-dma.6, so I've rebased that branch on top of
> powerpc-dma.6-debug.2:
> 
>    git://git.infradead.org/users/hch/misc.git powerpc-dma.6
> 
> Gitweb:
> 
>    http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
> 
> I hope the other patches are simple enough, so just testing the full
> branch checkout should be fine for now.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-30  4:40                                                                                                                                             ` Christian Zigotzky
@ 2019-01-31 12:48                                                                                                                                               ` Christian Zigotzky
  2019-02-01  8:04                                                                                                                                                 ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-01-31 12:48 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hi Christoph,

I compiled kernels for the X5000 and X1000 from your branch 
'powerpc-dma.6' today.

Gitweb: 
http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

The X1000 and X5000 boot but unfortunately the P.A. Semi Ethernet 
doesn't work.

Error messages (X1000):

[   17.371736] pci 0000:00:1a.0: overflow 0x00000002691bf802+1646 of DMA 
mask ffffffff bus mask 0
[   17.371760] WARNING: CPU: 0 PID: 2496 at kernel/dma/direct.c:43 
.dma_direct_map_page+0x11c/0x200
[   17.371762] Modules linked in:
[   17.371769] CPU: 0 PID: 2496 Comm: NetworkManager Not tainted 
5.0.0-rc4-3_A-EON_AmigaOne_X1000_Nemo-54580-g8d7a724-dirty #2
[   17.371772] NIP:  c00000000010395c LR: c000000000103a30 CTR: 
c000000000726f70
[   17.371775] REGS: c00000026900e9a0 TRAP: 0700   Not tainted 
(5.0.0-rc4-3_A-EON_AmigaOne_X1000_Nemo-54580-g8d7a724-dirty)
[   17.371777] MSR:  9000000000029032 <SF,HV,EE,ME,IR,DR,RI> CR: 
24002222  XER: 20000000
[   17.371786] IRQMASK: 0
                GPR00: c000000000103a30 c00000026900ec30 
c000000001923f00 0000000000000052
                GPR04: c00000026f206778 c00000026f20d458 
0000000000000000 0000000000000346
                GPR08: 0000000000000007 0000000000000000 
0000000000000000 0000000000000010
                GPR12: 0000000022002444 c000000001b10000 
0000000000000000 0000000000000000
                GPR16: 0000000010382410 0000000000000000 
0000000000000000 c00000026bd9d820
                GPR20: 0000000000000000 c00000026919c000 
0000000000000000 0000000000000000
                GPR24: 0000000000000800 c000000269190000 
c0000002692a4180 c000000269190000
                GPR28: c000000277ada1c8 000000000000066e 
c00000026d3c68b0 0000000000000802
[   17.371823] NIP [c00000000010395c] .dma_direct_map_page+0x11c/0x200
[   17.371827] LR [c000000000103a30] .dma_direct_map_page+0x1f0/0x200
[   17.371829] Call Trace:
[   17.371833] [c00000026900ec30] [c000000000103a30] 
.dma_direct_map_page+0x1f0/0x200 (unreliable)
[   17.371840] [c00000026900ecd0] [c00000000099b7ec] 
.pasemi_mac_replenish_rx_ring+0x12c/0x2a0
[   17.371846] [c00000026900eda0] [c00000000099dc64] 
.pasemi_mac_open+0x384/0x7c0
[   17.371853] [c00000026900ee40] [c000000000c6f484] .__dev_open+0x134/0x1e0
[   17.371858] [c00000026900eee0] [c000000000c6f9ec] 
.__dev_change_flags+0x1bc/0x210
[   17.371863] [c00000026900ef90] [c000000000c6fa88] 
.dev_change_flags+0x48/0xa0
[   17.371869] [c00000026900f030] [c000000000c8c88c] .do_setlink+0x3dc/0xf60
[   17.371875] [c00000026900f1b0] [c000000000c8dd84] 
.__rtnl_newlink+0x5e4/0x900
[   17.371880] [c00000026900f5f0] [c000000000c8e10c] .rtnl_newlink+0x6c/0xb0
[   17.371885] [c00000026900f680] [c000000000c89838] 
.rtnetlink_rcv_msg+0x2e8/0x3d0
[   17.371891] [c00000026900f760] [c000000000cc0f90] 
.netlink_rcv_skb+0x120/0x170
[   17.371896] [c00000026900f820] [c000000000c87318] 
.rtnetlink_rcv+0x28/0x40
[   17.371901] [c00000026900f8a0] [c000000000cc03f8] 
.netlink_unicast+0x208/0x2f0
[   17.371906] [c00000026900f950] [c000000000cc09a8] 
.netlink_sendmsg+0x348/0x460
[   17.371911] [c00000026900fa30] [c000000000c38774] .sock_sendmsg+0x44/0x70
[   17.371915] [c00000026900fab0] [c000000000c3a79c] 
.___sys_sendmsg+0x30c/0x320
[   17.371920] [c00000026900fca0] [c000000000c3c3b4] 
.__sys_sendmsg+0x74/0xf0
[   17.371926] [c00000026900fd90] [c000000000cb4da0] 
.__se_compat_sys_sendmsg+0x40/0x60
[   17.371932] [c00000026900fe20] [c00000000000a21c] system_call+0x5c/0x70
[   17.371934] Instruction dump:
[   17.371937] 60000000 f8610070 3d20ffff 6129fffe 79290020 e8e70000 
7fa74840 409d00b8
[   17.371946] 3d420001 892acb59 2f890000 419e00b8 <0fe00000> 382100a0 
3860ffff e8010010
[   17.371954] ---[ end trace a81f3c344f625f76 ]---
[   17.396654] IPv6: ADDRCONF(NETDEV_UP): enp0s20f3: link is not ready

--------

Additionally, Xorg doesn't start on a virtual e5500 QEMU machine 
anymore. I tested with the following QEMU command:

./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -kernel 
/home/christian/Downloads/vmlinux-5.0-rc4-3-AmigaOne_X1000_X5000/X5000_and_QEMU_e5500/uImage-5.0 
-drive 
format=raw,file=/home/christian/Downloads/Fienix-Beta120418.img,index=0,if=virtio 
-nic user,model=e1000 -append "rw root=/dev/vda" -device virtio-vga 
-device virtio-mouse-pci -device virtio-keyboard-pci -usb -soundhw 
es1370 -smp 4

Cheers,
Christian


On 30 January 2019 at 05:40AM, Christian Zigotzky wrote:
> Hi Christoph,
>
> Thanks a lot for the updates. I will test the full branch tomorrow.
>
> Cheers,
> Christian
>
> Sent from my iPhone
>
>> On 29. Jan 2019, at 17:34, Christoph Hellwig <hch@lst.de> wrote:
>>
>>> On Tue, Jan 29, 2019 at 05:14:11PM +0100, Christoph Hellwig wrote:
>>>> On Tue, Jan 29, 2019 at 04:03:32PM +0100, Christian Zigotzky wrote:
>>>> Hi Christoph,
>>>>
>>>> I compiled kernels for the X5000 and X1000 from your new branch
>>>> 'powerpc-dma.6-debug.2' today. The kernels boot and the P.A. Semi Ethernet
>>>> works!
>>> Thanks for testing!  I'll prepare a new series that adds the other
>>> patches on top of this one.
>> And that was easier than I thought - we just had a few patches left
>> in powerpc-dma.6, so I've rebased that branch on top of
>> powerpc-dma.6-debug.2:
>>
>>     git://git.infradead.org/users/hch/misc.git powerpc-dma.6
>>
>> Gitweb:
>>
>>     http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>
>> I hope the other patches are simple enough, so just testing the full
>> branch checkout should be fine for now.



^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-01-31 12:48                                                                                                                                               ` Christian Zigotzky
@ 2019-02-01  8:04                                                                                                                                                 ` Christoph Hellwig
  2019-02-01 16:54                                                                                                                                                   ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-02-01  8:04 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Thu, Jan 31, 2019 at 01:48:26PM +0100, Christian Zigotzky wrote:
> Hi Christoph,
>
> I compiled kernels for the X5000 and X1000 from your branch 'powerpc-dma.6' 
> today.
>
> Gitweb: 
> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>
> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>
> The X1000 and X5000 boot but unfortunately the P.A. Semi Ethernet doesn't 
> work.

Oh.  Can you try with just the next one and then two patches applied
over the working setup?  That is first:

http://git.infradead.org/users/hch/misc.git/commitdiff/b50f42f0fe12965ead395c76bcb6a14f00cdf65b

then also with:

http://git.infradead.org/users/hch/misc.git/commitdiff/21fe52470a483afbb1726741118abef8602dde4d

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-01  8:04                                                                                                                                                 ` Christoph Hellwig
@ 2019-02-01 16:54                                                                                                                                                   ` Christian Zigotzky
  2019-02-03 16:49                                                                                                                                                     ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-02-01 16:54 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hi Christoph,

I will try it at the weekend.

Thanks,
Christian

Sent from my iPhone

> On 1. Feb 2019, at 09:04, Christoph Hellwig <hch@lst.de> wrote:
> 
>> On Thu, Jan 31, 2019 at 01:48:26PM +0100, Christian Zigotzky wrote:
>> Hi Christoph,
>> 
>> I compiled kernels for the X5000 and X1000 from your branch 'powerpc-dma.6' 
>> today.
>> 
>> Gitweb: 
>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>> 
>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>> 
>> The X1000 and X5000 boot but unfortunately the P.A. Semi Ethernet doesn't 
>> work.
> 
> Oh.  Can you try with just the next one and then two patches applied
> over the working setup?  That is first:
> 
> http://git.infradead.org/users/hch/misc.git/commitdiff/b50f42f0fe12965ead395c76bcb6a14f00cdf65b
> 
> then also with:
> 
> http://git.infradead.org/users/hch/misc.git/commitdiff/21fe52470a483afbb1726741118abef8602dde4d

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-01 16:54                                                                                                                                                   ` Christian Zigotzky
@ 2019-02-03 16:49                                                                                                                                                     ` Christian Zigotzky
  2019-02-04  7:56                                                                                                                                                       ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-02-03 16:49 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

OK, next step: b50f42f0fe12965ead395c76bcb6a14f00cdf65b (powerpc/dma: 
use the dma_direct mapping routines)

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

git checkout b50f42f0fe12965ead395c76bcb6a14f00cdf65b

Results: The X1000 and X5000 boot but unfortunately the P.A. Semi 
Ethernet doesn't work.

-- Christian


On 01 February 2019 at 5:54PM, Christian Zigotzky wrote:
> Hi Christoph,
>
> I will try it at the weekend.
>
> Thanks,
> Christian
>
> Sent from my iPhone
>
>> On 1. Feb 2019, at 09:04, Christoph Hellwig <hch@lst.de> wrote:
>>
>>> On Thu, Jan 31, 2019 at 01:48:26PM +0100, Christian Zigotzky wrote:
>>> Hi Christoph,
>>>
>>> I compiled kernels for the X5000 and X1000 from your branch 'powerpc-dma.6'
>>> today.
>>>
>>> Gitweb:
>>> http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6
>>>
>>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>>
>>> The X1000 and X5000 boot but unfortunately the P.A. Semi Ethernet doesn't
>>> work.
>> Oh.  Can you try with just the next one and then two patches applied
>> over the working setup?  That is first:
>>
>> http://git.infradead.org/users/hch/misc.git/commitdiff/b50f42f0fe12965ead395c76bcb6a14f00cdf65b
>>
>> then also with:
>>
>> http://git.infradead.org/users/hch/misc.git/commitdiff/21fe52470a483afbb1726741118abef8602dde4d



^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-03 16:49                                                                                                                                                     ` Christian Zigotzky
@ 2019-02-04  7:56                                                                                                                                                       ` Christoph Hellwig
  2019-02-04 12:13                                                                                                                                                         ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-02-04  7:56 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Sun, Feb 03, 2019 at 05:49:02PM +0100, Christian Zigotzky wrote:
> OK, next step: b50f42f0fe12965ead395c76bcb6a14f00cdf65b (powerpc/dma: use 
> the dma_direct mapping routines)
>
> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>
> git checkout b50f42f0fe12965ead395c76bcb6a14f00cdf65b
>
> Results: The X1000 and X5000 boot but unfortunately the P.A. Semi Ethernet 
> doesn't work.

Are there any interesting messages in the boot log?  Can you send me
the dmesg?

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-04  7:56                                                                                                                                                       ` Christoph Hellwig
@ 2019-02-04 12:13                                                                                                                                                         ` Christian Zigotzky
  2019-02-04 12:38                                                                                                                                                           ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-02-04 12:13 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 04 February 2019 at 08:56AM, Christoph Hellwig wrote:
> On Sun, Feb 03, 2019 at 05:49:02PM +0100, Christian Zigotzky wrote:
>> OK, next step: b50f42f0fe12965ead395c76bcb6a14f00cdf65b (powerpc/dma: use
>> the dma_direct mapping routines)
>>
>> git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
>>
>> git checkout b50f42f0fe12965ead395c76bcb6a14f00cdf65b
>>
>> Results: The X1000 and X5000 boot but unfortunately the P.A. Semi Ethernet
>> doesn't work.
> Are there any interesting messages in the boot log?  Can you send me
> the dmesg?
>
Here you are: http://www.xenosoft.de/dmesg_X1000_with_DMA_updates.txt

-- Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-04 12:13                                                                                                                                                         ` Christian Zigotzky
@ 2019-02-04 12:38                                                                                                                                                           ` Christoph Hellwig
  2019-02-06 13:45                                                                                                                                                             ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-02-04 12:38 UTC (permalink / raw)
  To: Christian Zigotzky, Olof Johansson
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, linuxppc-dev

On Mon, Feb 04, 2019 at 01:13:54PM +0100, Christian Zigotzky wrote:
>>> Results: The X1000 and X5000 boot but unfortunately the P.A. Semi Ethernet
>>> doesn't work.
>> Are there any interesting messages in the boot log?  Can you send me
>> the dmesg?
>>
> Here you are: http://www.xenosoft.de/dmesg_X1000_with_DMA_updates.txt

It seems like the pasemi driver fails to set a DMA mask, but seems
otherwise 64-bit DMA capable.  The old PPC code didn't verify the
dma mask during the map operations, but the x86-derived generic
code does.

This patch just sets the DMA mask.

Olof: does this look ok?  The DMA device seems to not directly
bound by the net driver, but not really used by anything else in tree
either..

diff --git a/drivers/net/ethernet/pasemi/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c
index d21041554507..d98bd447c536 100644
--- a/drivers/net/ethernet/pasemi/pasemi_mac.c
+++ b/drivers/net/ethernet/pasemi/pasemi_mac.c
@@ -1716,6 +1716,7 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		err = -ENODEV;
 		goto out;
 	}
+	dma_set_mask(&mac->dma_pdev->dev, DMA_BIT_MASK(32));
 
 	mac->iob_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
 	if (!mac->iob_pdev) {

^ permalink raw reply related	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-04 12:38                                                                                                                                                           ` Christoph Hellwig
@ 2019-02-06 13:45                                                                                                                                                             ` Christian Zigotzky
  2019-02-06 15:15                                                                                                                                                               ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-02-06 13:45 UTC (permalink / raw)
  To: Christoph Hellwig, Olof Johansson
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, linuxppc-dev

On 04 February 2019 at 01:38PM, Christoph Hellwig wrote:
>
> It seems like the pasemi driver fails to set a DMA mask, but seems
> otherwise 64-bit DMA capable.  The old PPC code didn't verify the
> dma mask during the map operations, but the x86-derived generic
> code does.
>
> This patch just sets the DMA mask.
>
> Olof: does this look ok?  The DMA device seems to not directly
> bound by the net driver, but not really used by anything else in tree
> either..
>
> diff --git a/drivers/net/ethernet/pasemi/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c
> index d21041554507..d98bd447c536 100644
> --- a/drivers/net/ethernet/pasemi/pasemi_mac.c
> +++ b/drivers/net/ethernet/pasemi/pasemi_mac.c
> @@ -1716,6 +1716,7 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>   		err = -ENODEV;
>   		goto out;
>   	}
> +	dma_set_mask(&mac->dma_pdev->dev, DMA_BIT_MASK(32));
>   
>   	mac->iob_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
>   	if (!mac->iob_pdev) {
>
Hello Christoph,

I patched the source code from the Git 'powerpc-dma.6' with your patch 
today. Unfortunately the P.A. Semi Ethernet doesn't work with the 
patched Git kernel.

After that I tried it with the patch applied over the working setup 
again (powerpc/dma: use the dma_direct mapping routines). Unfortunately 
after compiling
and booting, the P.A. Semi Ethernet doesn't work either.

Cheers,
Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-06 13:45                                                                                                                                                             ` Christian Zigotzky
@ 2019-02-06 15:15                                                                                                                                                               ` Christoph Hellwig
  2019-02-06 15:16                                                                                                                                                                 ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-02-06 15:15 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, Olof Johansson, linux-arch, Darren Stevens,
	linux-kernel, Julian Margetson, linux-mm, iommu, Paul Mackerras,
	linuxppc-dev

On Wed, Feb 06, 2019 at 02:45:34PM +0100, Christian Zigotzky wrote:
> I patched the source code from the Git 'powerpc-dma.6' with your patch 
> today. Unfortunately the P.A. Semi Ethernet doesn't work with the patched 
> Git kernel.
>
> After that I tried it with the patch applied over the working setup again 
> (powerpc/dma: use the dma_direct mapping routines). Unfortunately after 
> compiling
> and booting, the P.A. Semi Ethernet doesn't work either.

The last good one was 29e7e2287e196f48fe5d2a6e017617723ea979bf
("dma-direct: we might need GFP_DMA for 32-bit dma masks"), if I
remember correctly.  powerpc/dma: use the dma_direct mapping routines
was the one that you said makes the pasemi ethernet stop working.

Can you post the dmesg from the failing runs?

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-06 15:15                                                                                                                                                               ` Christoph Hellwig
@ 2019-02-06 15:16                                                                                                                                                                 ` Christoph Hellwig
  2019-02-07  4:34                                                                                                                                                                   ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-02-06 15:16 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, Olof Johansson, linux-arch, Darren Stevens,
	linux-kernel, Julian Margetson, linux-mm, iommu, Paul Mackerras,
	linuxppc-dev

On Wed, Feb 06, 2019 at 04:15:05PM +0100, Christoph Hellwig wrote:
> The last good one was 29e7e2287e196f48fe5d2a6e017617723ea979bf
> ("dma-direct: we might need GFP_DMA for 32-bit dma masks"), if I
> remember correctly.  powerpc/dma: use the dma_direct mapping routines
> was the one that you said makes the pasemi ethernet stop working.
> 
> Can you post the dmesg from the failing runs?

But I just noticed I sent you a wrong patch - the pasemi ethernet
should set a 64-bit DMA mask, not 32-bit.  Updated version below,
32-bit would just keep the previous status quo.

commit 6c8f88045dee35933337b9ce2ea5371eee37073a
Author: Christoph Hellwig <hch@lst.de>
Date:   Mon Feb 4 13:38:22 2019 +0100

    pasemi WIP

diff --git a/drivers/net/ethernet/pasemi/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c
index 8a31a02c9f47..2d7d1589490a 100644
--- a/drivers/net/ethernet/pasemi/pasemi_mac.c
+++ b/drivers/net/ethernet/pasemi/pasemi_mac.c
@@ -1716,6 +1716,7 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		err = -ENODEV;
 		goto out;
 	}
+	dma_set_mask(&mac->dma_pdev->dev, DMA_BIT_MASK(64));
 
 	mac->iob_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
 	if (!mac->iob_pdev) {

^ permalink raw reply related	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-06 15:16                                                                                                                                                                 ` Christoph Hellwig
@ 2019-02-07  4:34                                                                                                                                                                   ` Christian Zigotzky
  2019-02-08  9:01                                                                                                                                                                     ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-02-07  4:34 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Olof Johansson, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras, linuxppc-dev

Hi Christoph,

I also didn’t notice the 32-bit DMA mask in your patch. I have to read your patches and descriptions carefully in the future. I will test your new patch at the weekend.

Thanks,
Christian

Sent from my iPhone

> On 6. Feb 2019, at 16:16, Christoph Hellwig <hch@lst.de> wrote:
> 
>> On Wed, Feb 06, 2019 at 04:15:05PM +0100, Christoph Hellwig wrote:
>> The last good one was 29e7e2287e196f48fe5d2a6e017617723ea979bf
>> ("dma-direct: we might need GFP_DMA for 32-bit dma masks"), if I
>> remember correctly.  powerpc/dma: use the dma_direct mapping routines
>> was the one that you said makes the pasemi ethernet stop working.
>> 
>> Can you post the dmesg from the failing runs?
> 
> But I just noticed I sent you a wrong patch - the pasemi ethernet
> should set a 64-bit DMA mask, not 32-bit.  Updated version below,
> 32-bit would just keep the previous status quo.
> 
> commit 6c8f88045dee35933337b9ce2ea5371eee37073a
> Author: Christoph Hellwig <hch@lst.de>
> Date:   Mon Feb 4 13:38:22 2019 +0100
> 
>    pasemi WIP
> 
> diff --git a/drivers/net/ethernet/pasemi/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c
> index 8a31a02c9f47..2d7d1589490a 100644
> --- a/drivers/net/ethernet/pasemi/pasemi_mac.c
> +++ b/drivers/net/ethernet/pasemi/pasemi_mac.c
> @@ -1716,6 +1716,7 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>        err = -ENODEV;
>        goto out;
>    }
> +    dma_set_mask(&mac->dma_pdev->dev, DMA_BIT_MASK(64));
> 
>    mac->iob_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
>    if (!mac->iob_pdev) {

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-07  4:34                                                                                                                                                                   ` Christian Zigotzky
@ 2019-02-08  9:01                                                                                                                                                                     ` Christian Zigotzky
  2019-02-08  9:18                                                                                                                                                                       ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-02-08  9:01 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hi Christoph,

Your new patch fixes the problems with the P.A. Semi Ethernet! :-)

Thanks,
Christian


On 07 February 2019 at 05:34AM, Christian Zigotzky wrote:
> Hi Christoph,
>
> I also didn’t notice the 32-bit DMA mask in your patch. I have to read your patches and descriptions carefully in the future. I will test your new patch at the weekend.
>
> Thanks,
> Christian
>
> Sent from my iPhone
>
>> On 6. Feb 2019, at 16:16, Christoph Hellwig <hch@lst.de> wrote:
>>
>>> On Wed, Feb 06, 2019 at 04:15:05PM +0100, Christoph Hellwig wrote:
>>> The last good one was 29e7e2287e196f48fe5d2a6e017617723ea979bf
>>> ("dma-direct: we might need GFP_DMA for 32-bit dma masks"), if I
>>> remember correctly.  powerpc/dma: use the dma_direct mapping routines
>>> was the one that you said makes the pasemi ethernet stop working.
>>>
>>> Can you post the dmesg from the failing runs?
>> But I just noticed I sent you a wrong patch - the pasemi ethernet
>> should set a 64-bit DMA mask, not 32-bit.  Updated version below,
>> 32-bit would just keep the previous status quo.
>>
>> commit 6c8f88045dee35933337b9ce2ea5371eee37073a
>> Author: Christoph Hellwig <hch@lst.de>
>> Date:   Mon Feb 4 13:38:22 2019 +0100
>>
>>     pasemi WIP
>>
>> diff --git a/drivers/net/ethernet/pasemi/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c
>> index 8a31a02c9f47..2d7d1589490a 100644
>> --- a/drivers/net/ethernet/pasemi/pasemi_mac.c
>> +++ b/drivers/net/ethernet/pasemi/pasemi_mac.c
>> @@ -1716,6 +1716,7 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>>         err = -ENODEV;
>>         goto out;
>>     }
>> +    dma_set_mask(&mac->dma_pdev->dev, DMA_BIT_MASK(64));
>>
>>     mac->iob_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
>>     if (!mac->iob_pdev) {



^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-08  9:01                                                                                                                                                                     ` Christian Zigotzky
@ 2019-02-08  9:18                                                                                                                                                                       ` Christoph Hellwig
  2019-02-08 10:59                                                                                                                                                                         ` Christian Zigotzky
  2019-02-10 12:00                                                                                                                                                                         ` Christian Zigotzky
  0 siblings, 2 replies; 178+ messages in thread
From: Christoph Hellwig @ 2019-02-08  9:18 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Fri, Feb 08, 2019 at 10:01:46AM +0100, Christian Zigotzky wrote:
> Hi Christoph,
>
> Your new patch fixes the problems with the P.A. Semi Ethernet! :-)

Thanks a lot once again for testing!

Now can you test with this patch and the whole series?

I've updated the powerpc-dma.6 branch to include this fix.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-08  9:18                                                                                                                                                                       ` Christoph Hellwig
@ 2019-02-08 10:59                                                                                                                                                                         ` Christian Zigotzky
  2019-02-10 12:00                                                                                                                                                                         ` Christian Zigotzky
  1 sibling, 0 replies; 178+ messages in thread
From: Christian Zigotzky @ 2019-02-08 10:59 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

OK, I will test it.

— Christian

Sent from my iPhone

> On 8. Feb 2019, at 10:18, Christoph Hellwig <hch@lst.de> wrote:
> 
>> On Fri, Feb 08, 2019 at 10:01:46AM +0100, Christian Zigotzky wrote:
>> Hi Christoph,
>> 
>> Your new patch fixes the problems with the P.A. Semi Ethernet! :-)
> 
> Thanks a lot once again for testing!
> 
> Now can you test with this patch and the whole series?
> 
> I've updated the powerpc-dma.6 branch to include this fix.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-08  9:18                                                                                                                                                                       ` Christoph Hellwig
  2019-02-08 10:59                                                                                                                                                                         ` Christian Zigotzky
@ 2019-02-10 12:00                                                                                                                                                                         ` Christian Zigotzky
       [not found]                                                                                                                                                                           ` <0042290A-2939-4EBA-A638-D404FA2055ED@xenosoft.de>
  2019-02-11  7:38                                                                                                                                                                           ` Christoph Hellwig
  1 sibling, 2 replies; 178+ messages in thread
From: Christian Zigotzky @ 2019-02-10 12:00 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hi Christoph,

On 08 February 2019 at 10:18AM, Christoph Hellwig wrote:
> On Fri, Feb 08, 2019 at 10:01:46AM +0100, Christian Zigotzky wrote:
>> Hi Christoph,
>>
>> Your new patch fixes the problems with the P.A. Semi Ethernet! :-)
> Thanks a lot once again for testing!
>
> Now can you test with this patch and the whole series?
>
> I've updated the powerpc-dma.6 branch to include this fix.
>
I tested the whole series today. The kernels boot and the P.A. Semi 
Ethernet works! :-) Thanks a lot!

I also tested it in a virtual e5500 QEMU machine today. Unfortunately 
the kernel crashes.

Log:

[   54.624330] BUG: Unable to handle kernel data access at 
0xc06c008a0013014a
[   54.625640] Faulting instruction address: 0xc000000000027e7c
[   54.626140] Oops: Kernel access of bad area, sig: 11 [#1]
[   54.626456] BE SMP NR_CPUS=4 QEMU e500
[   54.626876] Modules linked in:
[   54.627284] CPU: 1 PID: 1876 Comm: systemd-journal Not tainted 
5.0.0-rc5-DMA_A1-X5000-54581-gda1d065-dirty #1
[   54.627819] NIP:  c000000000027e7c LR: c0000000000b5264 CTR: 
0000000000000000
[   54.628173] REGS: c00000007ffeb700 TRAP: 0300   Not tainted 
(5.0.0-rc5-DMA_A1-X5000-54581-gda1d065-dirty)
[   54.628607] MSR:  0000000080009000 <EE,ME>  CR: 44008486 XER: 00000000
[   54.629023] DEAR: c06c008a0013014a ESR: 0000000000800000 IRQMASK: 0
[   54.629023] GPR00: 0000000000005254 c00000007ffeb990 c0000000016b2000 
c06c008a0013014a
[   54.629023] GPR04: c00000007c54f8c0 0000000000000058 0000000000000006 
0000000000000000
[   54.629023] GPR08: 0000000000000000 000000007c54f8c0 006c008a0013014a 
c00000007c86c000
[   54.629023] GPR12: 0000000028002482 c00000003ffff8c0 0000000000000000 
c000000078dfaa70
[   54.629023] GPR16: c000000078366c00 0000000000000000 000000000000005e 
0000000000000000
[   54.629023] GPR20: 0000000000000000 c00000007c54f8c0 0000000000000007 
c000000078dfa000
[   54.629023] GPR24: 0000000000000000 0000000000000047 0000000000000000 
80000000003f6470
[   54.629023] GPR28: c00000007928d470 c000000078801dc0 000000000000005e 
c000000078dfa7c0
[   54.632572] NIP [c000000000027e7c] .memcpy+0x1fc/0x288
[   54.632886] LR [c0000000000b5264] .swiotlb_tbl_sync_single+0xb0/0xe4
[   54.633221] Call Trace:
[   54.633513] [c00000007ffeb990] [c00000007ffeba70] 0xc00000007ffeba70 
(unreliable)
[   54.633988] [c00000007ffeba00] [c0000000000b41e4] 
.dma_direct_sync_single_for_cpu+0x58/0x6c
[   54.634436] [c00000007ffeba70] [c000000000788da4] 
.e1000_clean_rx_irq+0x1bc/0x4c8
[   54.634857] [c00000007ffebb90] [c00000000078667c] 
.e1000_clean+0x714/0x8d4
[   54.635263] [c00000007ffebcc0] [c000000000a3f15c] 
.net_rx_action+0x11c/0x2a4
[   54.635712] [c00000007ffebdb0] [c000000000c48c20] 
.__do_softirq+0x150/0x2a8
[   54.636211] [c00000007ffebeb0] [c000000000064184] .irq_exit+0x6c/0xc4
[   54.636533] [c00000007ffebf20] [c000000000004124] .__do_irq+0x80/0x94
[   54.636985] [c00000007ffebf90] [c00000000000eca0] .call_do_irq+0x14/0x24
[   54.637371] [c00000007c86fd80] [c0000000000041c0] .do_IRQ+0x88/0xc4
[   54.637737] [c00000007c86fe20] [c000000000012920] 
exc_0x500_common+0xd8/0xdc
[   54.638104] Instruction dump:
[   54.638451] e861fff8 4e800020 7cd01120 7ca62850 38e00000 28a50010 
409f0010 88040000
[   54.638887] 98030000 38e70001 409e0010 7c07222e <7c071b2e> 38e70002 
409d000c 7c07202e
[   54.639594] ---[ end trace a4861de7e4c199f7 ]---
[   54.639873]
[   55.640484] Kernel panic - not syncing: Aiee, killing interrupt handler!
[   55.641556] Rebooting in 180 seconds..

-----

I tested with the following QEMU commands:

./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048  -nographic -kernel 
/home/christian/Downloads/vmlinux-5.0-rc5-2-AmigaOne_X1000_X5000/X5000_and_QEMU_e5500/uImage-5.0 
-nic user,model=e1000 -drive 
format=raw,file=/home/christian/Downloads/MATE_PowerPC_Remix_2017_0.9.img,index=0,if=virtio 
-append "rw root=/dev/vda" -smp 4

./qemu-system-ppc64 -M ppce500 -cpu e5500 -m 2048 -kernel 
/home/christian/Downloads/vmlinux-5.0-rc5-2-AmigaOne_X1000_X5000/X5000_and_QEMU_e5500/uImage-5.0 
-drive 
format=raw,file=/home/christian/Downloads/MATE_PowerPC_Remix_2017_0.9.img,index=0,if=virtio 
-nic user,model=e1000 -append "rw root=/dev/vda" -device virtio-vga 
-device virtio-mouse-pci -device virtio-keyboard-pci -usb -soundhw 
es1370 -smp 4

The RC5 of kernel 5.0 boots without any problems in this virtual machine.

Cheers,
Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
       [not found]                                                                                                                                                                           ` <0042290A-2939-4EBA-A638-D404FA2055ED@xenosoft.de>
@ 2019-02-11  7:21                                                                                                                                                                             ` Christian Zigotzky
  0 siblings, 0 replies; 178+ messages in thread
From: Christian Zigotzky @ 2019-02-11  7:21 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

Hi Christoph,

Mario successfully tested a kernel from your Git [1] on his T2080rdb today.

Link to the log: 
https://gitlab.com/oshw-powerpc-notebook/T2080customizations/blob/master/kernel/dma_fix/kernel_dma_fix_log.txt

He wrote:

Please, note that all of the above kernel runs just fine with the T2080rdb, however did not had the time to test extensively (tested: login into MATE graphical desktop environment, used ArctiFox for opening couple of websites, then played Neverball).

——

Cheers,
Christian

[1] http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/powerpc-dma.6

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-10 12:00                                                                                                                                                                         ` Christian Zigotzky
       [not found]                                                                                                                                                                           ` <0042290A-2939-4EBA-A638-D404FA2055ED@xenosoft.de>
@ 2019-02-11  7:38                                                                                                                                                                           ` Christoph Hellwig
  2019-02-12 12:42                                                                                                                                                                             ` Christian Zigotzky
  1 sibling, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-02-11  7:38 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Sun, Feb 10, 2019 at 01:00:20PM +0100, Christian Zigotzky wrote:
> I tested the whole series today. The kernels boot and the P.A. Semi 
> Ethernet works! :-) Thanks a lot!
>
> I also tested it in a virtual e5500 QEMU machine today. Unfortunately the 
> kernel crashes.

This looks like a patch I fixed in mainline a while ago, but which
the powerpc tree didn't have yet.

I've cherry picked this commit
("swiotlb: clear io_tlb_start and io_tlb_end in swiotlb_exit")

and added it to the powerpc-dma.6 tree, please retry with that one.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-11  7:38                                                                                                                                                                           ` Christoph Hellwig
@ 2019-02-12 12:42                                                                                                                                                                             ` Christian Zigotzky
  2019-02-12 15:25                                                                                                                                                                               ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-02-12 12:42 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 11 February 2019 at 08:38AM, Christoph Hellwig wrote:
> On Sun, Feb 10, 2019 at 01:00:20PM +0100, Christian Zigotzky wrote:
>> I tested the whole series today. The kernels boot and the P.A. Semi
>> Ethernet works! :-) Thanks a lot!
>>
>> I also tested it in a virtual e5500 QEMU machine today. Unfortunately the
>> kernel crashes.
> This looks like a patch I fixed in mainline a while ago, but which
> the powerpc tree didn't have yet.
>
> I've cherry picked this commit
> ("swiotlb: clear io_tlb_start and io_tlb_end in swiotlb_exit")
>
> and added it to the powerpc-dma.6 tree, please retry with that one.
>
Hello Christoph,

Have you added it to the powerpc-dma.6 tree yet? The last commit was 4 
days ago.

Thanks,
Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-12 12:42                                                                                                                                                                             ` Christian Zigotzky
@ 2019-02-12 15:25                                                                                                                                                                               ` Christoph Hellwig
  2019-02-12 19:31                                                                                                                                                                                 ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christoph Hellwig @ 2019-02-12 15:25 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

On Tue, Feb 12, 2019 at 01:42:56PM +0100, Christian Zigotzky wrote:
> On 11 February 2019 at 08:38AM, Christoph Hellwig wrote:
>> On Sun, Feb 10, 2019 at 01:00:20PM +0100, Christian Zigotzky wrote:
>>> I tested the whole series today. The kernels boot and the P.A. Semi
>>> Ethernet works! :-) Thanks a lot!
>>>
>>> I also tested it in a virtual e5500 QEMU machine today. Unfortunately the
>>> kernel crashes.
>> This looks like a patch I fixed in mainline a while ago, but which
>> the powerpc tree didn't have yet.
>>
>> I've cherry picked this commit
>> ("swiotlb: clear io_tlb_start and io_tlb_end in swiotlb_exit")
>>
>> and added it to the powerpc-dma.6 tree, please retry with that one.
>>
> Hello Christoph,
>
> Have you added it to the powerpc-dma.6 tree yet? The last commit was 4 days 
> ago.

I added it, but forgot to push it out.  It is there now, sorry:

http://git.infradead.org/users/hch/misc.git/commitdiff/2cf0745b7420af4a3e871d5a970a45662dfae69c

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-12 15:25                                                                                                                                                                               ` Christoph Hellwig
@ 2019-02-12 19:31                                                                                                                                                                                 ` Christian Zigotzky
  2019-02-12 19:50                                                                                                                                                                                   ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-02-12 19:31 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 12 February 2019 at 4:25PM, Christoph Hellwig wrote:
> On Tue, Feb 12, 2019 at 01:42:56PM +0100, Christian Zigotzky wrote:
>> On 11 February 2019 at 08:38AM, Christoph Hellwig wrote:
>>> On Sun, Feb 10, 2019 at 01:00:20PM +0100, Christian Zigotzky wrote:
>>>> I tested the whole series today. The kernels boot and the P.A. Semi
>>>> Ethernet works! :-) Thanks a lot!
>>>>
>>>> I also tested it in a virtual e5500 QEMU machine today. Unfortunately the
>>>> kernel crashes.
>>> This looks like a patch I fixed in mainline a while ago, but which
>>> the powerpc tree didn't have yet.
>>>
>>> I've cherry picked this commit
>>> ("swiotlb: clear io_tlb_start and io_tlb_end in swiotlb_exit")
>>>
>>> and added it to the powerpc-dma.6 tree, please retry with that one.
>>>
>> Hello Christoph,
>>
>> Have you added it to the powerpc-dma.6 tree yet? The last commit was 4 days
>> ago.
> I added it, but forgot to push it out.  It is there now, sorry:
>
> http://git.infradead.org/users/hch/misc.git/commitdiff/2cf0745b7420af4a3e871d5a970a45662dfae69c
>
Hi Christoph

Many thanks! Your Git kernel works in a virtual e5500 machine now! :-)

I think we have reached the end of testing! All things are working with 
your DMA updates.

I am looking forward to test your DMA changes in the next merge window 
again. :-)

Cheers
Christian


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-12 19:31                                                                                                                                                                                 ` Christian Zigotzky
@ 2019-02-12 19:50                                                                                                                                                                                   ` Christian Zigotzky
  2019-02-12 19:52                                                                                                                                                                                     ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-02-12 19:50 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, Darren Stevens, linux-kernel, Julian Margetson,
	linux-mm, iommu, Paul Mackerras, Olof Johansson, linuxppc-dev

On 12 February 2019 at 8:31PM, Christian Zigotzky wrote:
> On 12 February 2019 at 4:25PM, Christoph Hellwig wrote:
>> On Tue, Feb 12, 2019 at 01:42:56PM +0100, Christian Zigotzky wrote:
>>> On 11 February 2019 at 08:38AM, Christoph Hellwig wrote:
>>>> On Sun, Feb 10, 2019 at 01:00:20PM +0100, Christian Zigotzky wrote:
>>>>> I tested the whole series today. The kernels boot and the P.A. Semi
>>>>> Ethernet works! :-) Thanks a lot!
>>>>>
>>>>> I also tested it in a virtual e5500 QEMU machine today. 
>>>>> Unfortunately the
>>>>> kernel crashes.
>>>> This looks like a patch I fixed in mainline a while ago, but which
>>>> the powerpc tree didn't have yet.
>>>>
>>>> I've cherry picked this commit
>>>> ("swiotlb: clear io_tlb_start and io_tlb_end in swiotlb_exit")
>>>>
>>>> and added it to the powerpc-dma.6 tree, please retry with that one.
>>>>
>>> Hello Christoph,
>>>
>>> Have you added it to the powerpc-dma.6 tree yet? The last commit was 
>>> 4 days
>>> ago.
>> I added it, but forgot to push it out.  It is there now, sorry:
>>
>> http://git.infradead.org/users/hch/misc.git/commitdiff/2cf0745b7420af4a3e871d5a970a45662dfae69c 
>>
>>
> Hi Christoph
>
> Many thanks! Your Git kernel works in a virtual e5500 machine now! :-)
>
> I think we have reached the end of testing! All things are working 
> with your DMA updates.
>
> I am looking forward to testing your DMA changes in the next merge 
> window again. :-)
>
> Cheers
> Christian
>
>
Edit: typo


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2019-02-12 19:50                                                                                                                                                                                   ` Christian Zigotzky
@ 2019-02-12 19:52                                                                                                                                                                                     ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2019-02-12 19:52 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, Darren Stevens, linux-kernel,
	Julian Margetson, linux-mm, iommu, Paul Mackerras,
	Olof Johansson, linuxppc-dev

Great!  I owe you a night worth of beers at a conference or if
you come anywhere near Innsbruck!

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Bug 205201 - overflow of DMA mask and bus mask
  2019-01-09  9:31                                                                             ` Christian Zigotzky
  2019-01-11  2:10                                                                               ` Christian Zigotzky
@ 2019-11-05  7:56                                                                               ` Christian Zigotzky
  2019-11-05 16:28                                                                                 ` Christoph Hellwig
  1 sibling, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-11-05  7:56 UTC (permalink / raw)
  To: Christoph Hellwig, linux-arch, linux-kernel, linux-mm, iommu,
	Olof Johansson

Hi All,

We still have DMA problems with some PCI devices. Since the PowerPC 
updates 4.21-1 [1] we need to decrease the RAM to 3500MB (mem=3500M) if 
we want to work with our PCI devices. The FSL P5020 and P5040 have these 
problems currently.

Error message:

[   25.654852] bttv 1000:04:05.0: overflow 0x00000000fe077000+4096 of 
DMA mask ffffffff bus mask df000000

All 5.x Linux kernels can't initialize a SCSI PCI card anymore so 
booting of a Linux userland isn't possible.

PLEASE check the DMA changes in the PowerPC updates 4.21-1 [1]. The 
kernel 4.20 works with all PCI devices without limitation of RAM.

We created a bug report a month ago. [2]

Thanks,
Christian

[1] 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8d6973327ee84c2f40dd9efd8928d4a1186c96e2
[2] https://bugzilla.kernel.org/show_bug.cgi?id=205201



^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: Bug 205201 - overflow of DMA mask and bus mask
  2019-11-05  7:56                                                                               ` Bug 205201 - overflow of DMA mask and bus mask Christian Zigotzky
@ 2019-11-05 16:28                                                                                 ` Christoph Hellwig
  2019-11-06 14:09                                                                                   ` Robin Murphy
  2019-11-07  9:53                                                                                   ` Christian Zigotzky
  0 siblings, 2 replies; 178+ messages in thread
From: Christoph Hellwig @ 2019-11-05 16:28 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, linux-kernel, linux-mm, iommu,
	Olof Johansson

On Tue, Nov 05, 2019 at 08:56:27AM +0100, Christian Zigotzky wrote:
> Hi All,
>
> We still have DMA problems with some PCI devices. Since the PowerPC updates 
> 4.21-1 [1] we need to decrease the RAM to 3500MB (mem=3500M) if we want to 
> work with our PCI devices. The FSL P5020 and P5040 have these problems 
> currently.
>
> Error message:
>
> [   25.654852] bttv 1000:04:05.0: overflow 0x00000000fe077000+4096 of DMA 
> mask ffffffff bus mask df000000
>
> All 5.x Linux kernels can't initialize a SCSI PCI card anymore so booting 
> of a Linux userland isn't possible.
>
> PLEASE check the DMA changes in the PowerPC updates 4.21-1 [1]. The kernel 
> 4.20 works with all PCI devices without limitation of RAM.

Can you send me the .config and a dmesg?  And in the meantime try the
patch below?

---
From 4d659b7311bd4141fdd3eeeb80fa2d7602ea01d4 Mon Sep 17 00:00:00 2001
From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Date: Fri, 18 Oct 2019 13:00:43 +0200
Subject: dma-direct: check for overflows on 32 bit DMA addresses

As seen on the new Raspberry Pi 4 and sta2x11's DMA implementation it is
possible for a device configured with 32 bit DMA addresses and a partial
DMA mapping located at the end of the address space to overflow. It
happens when a higher physical address, not DMAable, is translated to
it's DMA counterpart.

For example the Raspberry Pi 4, configurable up to 4 GB of memory, has
an interconnect capable of addressing the lower 1 GB of physical memory
with a DMA offset of 0xc0000000. It transpires that, any attempt to
translate physical addresses higher than the first GB will result in an
overflow which dma_capable() can't detect as it only checks for
addresses bigger then the maximum allowed DMA address.

Fix this by verifying in dma_capable() if the DMA address range provided
is at any point lower than the minimum possible DMA address on the bus.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 include/linux/dma-direct.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
index adf993a3bd58..6ad9e9ea7564 100644
--- a/include/linux/dma-direct.h
+++ b/include/linux/dma-direct.h
@@ -3,6 +3,7 @@
 #define _LINUX_DMA_DIRECT_H 1
 
 #include <linux/dma-mapping.h>
+#include <linux/memblock.h> /* for min_low_pfn */
 #include <linux/mem_encrypt.h>
 
 #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA
@@ -27,6 +28,13 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 	if (!dev->dma_mask)
 		return false;
 
+#ifndef CONFIG_ARCH_DMA_ADDR_T_64BIT
+	/* Check if DMA address overflowed */
+	if (min(addr, addr + size - 1) <
+		__phys_to_dma(dev, (phys_addr_t)(min_low_pfn << PAGE_SHIFT)))
+		return false;
+#endif
+
 	return addr + size - 1 <=
 		min_not_zero(*dev->dma_mask, dev->bus_dma_mask);
 }
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 178+ messages in thread

* Re: Bug 205201 - overflow of DMA mask and bus mask
  2019-11-05 16:28                                                                                 ` Christoph Hellwig
@ 2019-11-06 14:09                                                                                   ` Robin Murphy
  2019-11-21 17:26                                                                                     ` Christoph Hellwig
  2019-11-07  9:53                                                                                   ` Christian Zigotzky
  1 sibling, 1 reply; 178+ messages in thread
From: Robin Murphy @ 2019-11-06 14:09 UTC (permalink / raw)
  To: Christoph Hellwig, Christian Zigotzky
  Cc: linux-arch, linux-kernel, linux-mm, iommu

On 05/11/2019 16:28, Christoph Hellwig wrote:
> On Tue, Nov 05, 2019 at 08:56:27AM +0100, Christian Zigotzky wrote:
>> Hi All,
>>
>> We still have DMA problems with some PCI devices. Since the PowerPC updates
>> 4.21-1 [1] we need to decrease the RAM to 3500MB (mem=3500M) if we want to
>> work with our PCI devices. The FSL P5020 and P5040 have these problems
>> currently.
>>
>> Error message:
>>
>> [   25.654852] bttv 1000:04:05.0: overflow 0x00000000fe077000+4096 of DMA
>> mask ffffffff bus mask df000000

Hmm, that bus mask looks pretty wacky - are you able to figure out where 
that's coming from?

Robin.

>> All 5.x Linux kernels can't initialize a SCSI PCI card anymore so booting
>> of a Linux userland isn't possible.
>>
>> PLEASE check the DMA changes in the PowerPC updates 4.21-1 [1]. The kernel
>> 4.20 works with all PCI devices without limitation of RAM.
> 
> Can you send me the .config and a dmesg?  And in the meantime try the
> patch below?
> 
> ---
>  From 4d659b7311bd4141fdd3eeeb80fa2d7602ea01d4 Mon Sep 17 00:00:00 2001
> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Date: Fri, 18 Oct 2019 13:00:43 +0200
> Subject: dma-direct: check for overflows on 32 bit DMA addresses
> 
> As seen on the new Raspberry Pi 4 and sta2x11's DMA implementation it is
> possible for a device configured with 32 bit DMA addresses and a partial
> DMA mapping located at the end of the address space to overflow. It
> happens when a higher physical address, not DMAable, is translated to
> it's DMA counterpart.
> 
> For example the Raspberry Pi 4, configurable up to 4 GB of memory, has
> an interconnect capable of addressing the lower 1 GB of physical memory
> with a DMA offset of 0xc0000000. It transpires that, any attempt to
> translate physical addresses higher than the first GB will result in an
> overflow which dma_capable() can't detect as it only checks for
> addresses bigger then the maximum allowed DMA address.
> 
> Fix this by verifying in dma_capable() if the DMA address range provided
> is at any point lower than the minimum possible DMA address on the bus.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> ---
>   include/linux/dma-direct.h | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
> index adf993a3bd58..6ad9e9ea7564 100644
> --- a/include/linux/dma-direct.h
> +++ b/include/linux/dma-direct.h
> @@ -3,6 +3,7 @@
>   #define _LINUX_DMA_DIRECT_H 1
>   
>   #include <linux/dma-mapping.h>
> +#include <linux/memblock.h> /* for min_low_pfn */
>   #include <linux/mem_encrypt.h>
>   
>   #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA
> @@ -27,6 +28,13 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
>   	if (!dev->dma_mask)
>   		return false;
>   
> +#ifndef CONFIG_ARCH_DMA_ADDR_T_64BIT
> +	/* Check if DMA address overflowed */
> +	if (min(addr, addr + size - 1) <
> +		__phys_to_dma(dev, (phys_addr_t)(min_low_pfn << PAGE_SHIFT)))
> +		return false;
> +#endif
> +
>   	return addr + size - 1 <=
>   		min_not_zero(*dev->dma_mask, dev->bus_dma_mask);
>   }
> 

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: Bug 205201 - overflow of DMA mask and bus mask
  2019-11-05 16:28                                                                                 ` Christoph Hellwig
  2019-11-06 14:09                                                                                   ` Robin Murphy
@ 2019-11-07  9:53                                                                                   ` Christian Zigotzky
  2019-11-10  7:27                                                                                     ` Christian Zigotzky
  1 sibling, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-11-07  9:53 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, linux-kernel, linux-mm, iommu,
	Benjamin Herrenschmidt, paulus, darren, contact, rtd2,
	mad skateman, Rob Herring, linuxppc-dev

On 05 November 2019 at 5:28 pm, Christoph Hellwig wrote:
> On Tue, Nov 05, 2019 at 08:56:27AM +0100, Christian Zigotzky wrote:
>> Hi All,
>>
>> We still have DMA problems with some PCI devices. Since the PowerPC updates
>> 4.21-1 [1] we need to decrease the RAM to 3500MB (mem=3500M) if we want to
>> work with our PCI devices. The FSL P5020 and P5040 have these problems
>> currently.
>>
>> Error message:
>>
>> [   25.654852] bttv 1000:04:05.0: overflow 0x00000000fe077000+4096 of DMA
>> mask ffffffff bus mask df000000
>>
>> All 5.x Linux kernels can't initialize a SCSI PCI card anymore so booting
>> of a Linux userland isn't possible.
>>
>> PLEASE check the DMA changes in the PowerPC updates 4.21-1 [1]. The kernel
>> 4.20 works with all PCI devices without limitation of RAM.
> Can you send me the .config and a dmesg?  And in the meantime try the
> patch below?
>
> ---
> >From 4d659b7311bd4141fdd3eeeb80fa2d7602ea01d4 Mon Sep 17 00:00:00 2001
> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Date: Fri, 18 Oct 2019 13:00:43 +0200
> Subject: dma-direct: check for overflows on 32 bit DMA addresses
>
> As seen on the new Raspberry Pi 4 and sta2x11's DMA implementation it is
> possible for a device configured with 32 bit DMA addresses and a partial
> DMA mapping located at the end of the address space to overflow. It
> happens when a higher physical address, not DMAable, is translated to
> it's DMA counterpart.
>
> For example the Raspberry Pi 4, configurable up to 4 GB of memory, has
> an interconnect capable of addressing the lower 1 GB of physical memory
> with a DMA offset of 0xc0000000. It transpires that, any attempt to
> translate physical addresses higher than the first GB will result in an
> overflow which dma_capable() can't detect as it only checks for
> addresses bigger then the maximum allowed DMA address.
>
> Fix this by verifying in dma_capable() if the DMA address range provided
> is at any point lower than the minimum possible DMA address on the bus.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> ---
>   include/linux/dma-direct.h | 8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
> index adf993a3bd58..6ad9e9ea7564 100644
> --- a/include/linux/dma-direct.h
> +++ b/include/linux/dma-direct.h
> @@ -3,6 +3,7 @@
>   #define _LINUX_DMA_DIRECT_H 1
>   
>   #include <linux/dma-mapping.h>
> +#include <linux/memblock.h> /* for min_low_pfn */
>   #include <linux/mem_encrypt.h>
>   
>   #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA
> @@ -27,6 +28,13 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
>   	if (!dev->dma_mask)
>   		return false;
>   
> +#ifndef CONFIG_ARCH_DMA_ADDR_T_64BIT
> +	/* Check if DMA address overflowed */
> +	if (min(addr, addr + size - 1) <
> +		__phys_to_dma(dev, (phys_addr_t)(min_low_pfn << PAGE_SHIFT)))
> +		return false;
> +#endif
> +
>   	return addr + size - 1 <=
>   		min_not_zero(*dev->dma_mask, dev->bus_dma_mask);
>   }
Hello Christoph,

Thanks a lot for your patch! Unfortunately this patch doesn't solve the 
issue.

Error messages:

[    6.041163] bttv: driver version 0.9.19 loaded
[    6.041167] bttv: using 8 buffers with 2080k (520 pages) each for capture
[    6.041559] bttv: Bt8xx card found (0)
[    6.041609] bttv: 0: Bt878 (rev 17) at 1000:04:05.0, irq: 19, 
latency: 128, mmio: 0xc20001000
[    6.041622] bttv: 0: using: Typhoon TView RDS + FM Stereo / KNC1 TV 
Station RDS [card=53,insmod option]
[    6.042216] bttv: 0: tuner type=5
[    6.111994] bttv: 0: audio absent, no audio device found!
[    6.176425] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 
100ms)
[    6.200005] bttv: PLL set ok
[    6.209351] bttv: 0: registered device video0
[    6.211576] bttv: 0: registered device vbi0
[    6.214897] bttv: 0: registered device radio0
[  114.218806] bttv 1000:04:05.0: overflow 0x00000000ff507000+4096 of 
DMA mask ffffffff bus mask df000000
[  114.218848] Modules linked in: rfcomm bnep tuner_simple tuner_types 
tea5767 tuner tda7432 tvaudio msp3400 bttv tea575x tveeprom 
videobuf_dma_sg videobuf_core rc_core videodev mc btusb btrtl btbcm 
btintel bluetooth uio_pdrv_genirq uio ecdh_generic ecc
[  114.219012] [c0000001ecddf720] [80000000008ff6e8] 
.buffer_prepare+0x150/0x268 [bttv]
[  114.219029] [c0000001ecddf860] [80000000008fff6c] 
.bttv_qbuf+0x50/0x64 [bttv]

-----

Trace:

[  462.783184] Call Trace:
[  462.783187] [c0000001c6c67420] [c0000000000b3358] 
.report_addr+0xb8/0xc0 (unreliable)
[  462.783192] [c0000001c6c67490] [c0000000000b351c] 
.dma_direct_map_page+0xf0/0x128
[  462.783195] [c0000001c6c67530] [c0000000000b35b0] 
.dma_direct_map_sg+0x5c/0xac
[  462.783205] [c0000001c6c675e0] [8000000000862e88] 
.__videobuf_iolock+0x660/0x6d8 [videobuf_dma_sg]
[  462.783220] [c0000001c6c676b0] [8000000000854274] 
.videobuf_iolock+0x98/0xb4 [videobuf_core]
[  462.783271] [c0000001c6c67720] [80000000008686e8] 
.buffer_prepare+0x150/0x268 [bttv]
[  462.783276] [c0000001c6c677c0] [8000000000854afc] 
.videobuf_qbuf+0x2b8/0x428 [videobuf_core]
[  462.783288] [c0000001c6c67860] [8000000000868f6c] 
.bttv_qbuf+0x50/0x64 [bttv]
[  462.783383] [c0000001c6c678e0] [80000000007bf208] .v4l_qbuf+0x54/0x60 
[videodev]
[  462.783402] [c0000001c6c67970] [80000000007c1eac] 
.__video_do_ioctl+0x30c/0x3f8 [videodev]
[  462.783421] [c0000001c6c67a80] [80000000007c3c08] 
.video_usercopy+0x18c/0x3dc [videodev]
[  462.783440] [c0000001c6c67c00] [80000000007bb14c] 
.v4l2_ioctl+0x60/0x78 [videodev]
[  462.783460] [c0000001c6c67c90] [80000000007d3c48] 
.v4l2_compat_ioctl32+0x9b4/0x1850 [videodev]
[  462.783468] [c0000001c6c67d70] [c0000000001ad9cc] 
.__se_compat_sys_ioctl+0x284/0x127c
[  462.783473] [c0000001c6c67e20] [c00000000000067c] system_call+0x60/0x6c
[  462.783475] Instruction dump:
[  462.783477] 40fe0044 60000000 892255d0 2f890000 40fe0020 3c82ffc5 
39200001 60000000
[  462.783483] 38842029 992255d0 485ad0d9 60000000 <0fe00000> 38210070 
e8010010 7c0803a6
[  462.783490] ---[ end trace b677d4a00458e277 ]---

-----

dmesg fsl p5040: https://bugzilla.kernel.org/attachment.cgi?id=285813

Kernel 5.4-rc6 config for the Cyrus+ board and for the QEMU ppce500 
board (CPU: P5040 and P5020): 
https://bugzilla.kernel.org/attachment.cgi?id=285815

Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=205201

Thanks for your help,

Christian

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: Bug 205201 - overflow of DMA mask and bus mask
  2019-11-07  9:53                                                                                   ` Christian Zigotzky
@ 2019-11-10  7:27                                                                                     ` Christian Zigotzky
  2019-11-11  8:12                                                                                       ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-11-10  7:27 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, linux-kernel, linux-mm, iommu,
	Benjamin Herrenschmidt, paulus, darren, contact, rtd2,
	mad skateman, Rob Herring, linuxppc-dev

On 07 November 2019 at 10:53 am, Christian Zigotzky wrote:
> On 05 November 2019 at 5:28 pm, Christoph Hellwig wrote:
>> On Tue, Nov 05, 2019 at 08:56:27AM +0100, Christian Zigotzky wrote:
>>> Hi All,
>>>
>>> We still have DMA problems with some PCI devices. Since the PowerPC 
>>> updates
>>> 4.21-1 [1] we need to decrease the RAM to 3500MB (mem=3500M) if we 
>>> want to
>>> work with our PCI devices. The FSL P5020 and P5040 have these problems
>>> currently.
>>>
>>> Error message:
>>>
>>> [   25.654852] bttv 1000:04:05.0: overflow 0x00000000fe077000+4096 
>>> of DMA
>>> mask ffffffff bus mask df000000
>>>
>>> All 5.x Linux kernels can't initialize a SCSI PCI card anymore so 
>>> booting
>>> of a Linux userland isn't possible.
>>>
>>> PLEASE check the DMA changes in the PowerPC updates 4.21-1 [1]. The 
>>> kernel
>>> 4.20 works with all PCI devices without limitation of RAM.
>> Can you send me the .config and a dmesg?  And in the meantime try the
>> patch below?
>>
>> ---
>> >From 4d659b7311bd4141fdd3eeeb80fa2d7602ea01d4 Mon Sep 17 00:00:00 2001
>> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>> Date: Fri, 18 Oct 2019 13:00:43 +0200
>> Subject: dma-direct: check for overflows on 32 bit DMA addresses
>>
>> As seen on the new Raspberry Pi 4 and sta2x11's DMA implementation it is
>> possible for a device configured with 32 bit DMA addresses and a partial
>> DMA mapping located at the end of the address space to overflow. It
>> happens when a higher physical address, not DMAable, is translated to
>> it's DMA counterpart.
>>
>> For example the Raspberry Pi 4, configurable up to 4 GB of memory, has
>> an interconnect capable of addressing the lower 1 GB of physical memory
>> with a DMA offset of 0xc0000000. It transpires that, any attempt to
>> translate physical addresses higher than the first GB will result in an
>> overflow which dma_capable() can't detect as it only checks for
>> addresses bigger then the maximum allowed DMA address.
>>
>> Fix this by verifying in dma_capable() if the DMA address range provided
>> is at any point lower than the minimum possible DMA address on the bus.
>>
>> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>> ---
>>   include/linux/dma-direct.h | 8 ++++++++
>>   1 file changed, 8 insertions(+)
>>
>> diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
>> index adf993a3bd58..6ad9e9ea7564 100644
>> --- a/include/linux/dma-direct.h
>> +++ b/include/linux/dma-direct.h
>> @@ -3,6 +3,7 @@
>>   #define _LINUX_DMA_DIRECT_H 1
>>     #include <linux/dma-mapping.h>
>> +#include <linux/memblock.h> /* for min_low_pfn */
>>   #include <linux/mem_encrypt.h>
>>     #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA
>> @@ -27,6 +28,13 @@ static inline bool dma_capable(struct device *dev, 
>> dma_addr_t addr, size_t size)
>>       if (!dev->dma_mask)
>>           return false;
>>   +#ifndef CONFIG_ARCH_DMA_ADDR_T_64BIT
>> +    /* Check if DMA address overflowed */
>> +    if (min(addr, addr + size - 1) <
>> +        __phys_to_dma(dev, (phys_addr_t)(min_low_pfn << PAGE_SHIFT)))
>> +        return false;
>> +#endif
>> +
>>       return addr + size - 1 <=
>>           min_not_zero(*dev->dma_mask, dev->bus_dma_mask);
>>   }
> Hello Christoph,
>
> Thanks a lot for your patch! Unfortunately this patch doesn't solve 
> the issue.
>
> Error messages:
>
> [    6.041163] bttv: driver version 0.9.19 loaded
> [    6.041167] bttv: using 8 buffers with 2080k (520 pages) each for 
> capture
> [    6.041559] bttv: Bt8xx card found (0)
> [    6.041609] bttv: 0: Bt878 (rev 17) at 1000:04:05.0, irq: 19, 
> latency: 128, mmio: 0xc20001000
> [    6.041622] bttv: 0: using: Typhoon TView RDS + FM Stereo / KNC1 TV 
> Station RDS [card=53,insmod option]
> [    6.042216] bttv: 0: tuner type=5
> [    6.111994] bttv: 0: audio absent, no audio device found!
> [    6.176425] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 
> 100ms)
> [    6.200005] bttv: PLL set ok
> [    6.209351] bttv: 0: registered device video0
> [    6.211576] bttv: 0: registered device vbi0
> [    6.214897] bttv: 0: registered device radio0
> [  114.218806] bttv 1000:04:05.0: overflow 0x00000000ff507000+4096 of 
> DMA mask ffffffff bus mask df000000
> [  114.218848] Modules linked in: rfcomm bnep tuner_simple tuner_types 
> tea5767 tuner tda7432 tvaudio msp3400 bttv tea575x tveeprom 
> videobuf_dma_sg videobuf_core rc_core videodev mc btusb btrtl btbcm 
> btintel bluetooth uio_pdrv_genirq uio ecdh_generic ecc
> [  114.219012] [c0000001ecddf720] [80000000008ff6e8] 
> .buffer_prepare+0x150/0x268 [bttv]
> [  114.219029] [c0000001ecddf860] [80000000008fff6c] 
> .bttv_qbuf+0x50/0x64 [bttv]
>
> -----
>
> Trace:
>
> [  462.783184] Call Trace:
> [  462.783187] [c0000001c6c67420] [c0000000000b3358] 
> .report_addr+0xb8/0xc0 (unreliable)
> [  462.783192] [c0000001c6c67490] [c0000000000b351c] 
> .dma_direct_map_page+0xf0/0x128
> [  462.783195] [c0000001c6c67530] [c0000000000b35b0] 
> .dma_direct_map_sg+0x5c/0xac
> [  462.783205] [c0000001c6c675e0] [8000000000862e88] 
> .__videobuf_iolock+0x660/0x6d8 [videobuf_dma_sg]
> [  462.783220] [c0000001c6c676b0] [8000000000854274] 
> .videobuf_iolock+0x98/0xb4 [videobuf_core]
> [  462.783271] [c0000001c6c67720] [80000000008686e8] 
> .buffer_prepare+0x150/0x268 [bttv]
> [  462.783276] [c0000001c6c677c0] [8000000000854afc] 
> .videobuf_qbuf+0x2b8/0x428 [videobuf_core]
> [  462.783288] [c0000001c6c67860] [8000000000868f6c] 
> .bttv_qbuf+0x50/0x64 [bttv]
> [  462.783383] [c0000001c6c678e0] [80000000007bf208] 
> .v4l_qbuf+0x54/0x60 [videodev]
> [  462.783402] [c0000001c6c67970] [80000000007c1eac] 
> .__video_do_ioctl+0x30c/0x3f8 [videodev]
> [  462.783421] [c0000001c6c67a80] [80000000007c3c08] 
> .video_usercopy+0x18c/0x3dc [videodev]
> [  462.783440] [c0000001c6c67c00] [80000000007bb14c] 
> .v4l2_ioctl+0x60/0x78 [videodev]
> [  462.783460] [c0000001c6c67c90] [80000000007d3c48] 
> .v4l2_compat_ioctl32+0x9b4/0x1850 [videodev]
> [  462.783468] [c0000001c6c67d70] [c0000000001ad9cc] 
> .__se_compat_sys_ioctl+0x284/0x127c
> [  462.783473] [c0000001c6c67e20] [c00000000000067c] 
> system_call+0x60/0x6c
> [  462.783475] Instruction dump:
> [  462.783477] 40fe0044 60000000 892255d0 2f890000 40fe0020 3c82ffc5 
> 39200001 60000000
> [  462.783483] 38842029 992255d0 485ad0d9 60000000 <0fe00000> 38210070 
> e8010010 7c0803a6
> [  462.783490] ---[ end trace b677d4a00458e277 ]---
>
> -----
>
> dmesg fsl p5040: https://bugzilla.kernel.org/attachment.cgi?id=285813
>
> Kernel 5.4-rc6 config for the Cyrus+ board and for the QEMU ppce500 
> board (CPU: P5040 and P5020): 
> https://bugzilla.kernel.org/attachment.cgi?id=285815
>
> Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=205201
>
> Thanks for your help,
>
> Christian

Christoph,

Do you have another patch for testing or shall I bisect?

Thanks,
Christian

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: Bug 205201 - overflow of DMA mask and bus mask
  2019-11-10  7:27                                                                                     ` Christian Zigotzky
@ 2019-11-11  8:12                                                                                       ` Christian Zigotzky
  2019-11-11  8:16                                                                                         ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-11-11  8:12 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, linux-kernel, linux-mm, iommu,
	Benjamin Herrenschmidt, paulus, darren, contact, rtd2,
	mad skateman, Rob Herring, linuxppc-dev

On 10 November 2019 at 08:27 am, Christian Zigotzky wrote:
> On 07 November 2019 at 10:53 am, Christian Zigotzky wrote:
>> On 05 November 2019 at 05:28 pm, Christoph Hellwig wrote:
>>> On Tue, Nov 05, 2019 at 08:56:27AM +0100, Christian Zigotzky wrote:
>>>> Hi All,
>>>>
>>>> We still have DMA problems with some PCI devices. Since the PowerPC 
>>>> updates
>>>> 4.21-1 [1] we need to decrease the RAM to 3500MB (mem=3500M) if we 
>>>> want to
>>>> work with our PCI devices. The FSL P5020 and P5040 have these problems
>>>> currently.
>>>>
>>>> Error message:
>>>>
>>>> [   25.654852] bttv 1000:04:05.0: overflow 0x00000000fe077000+4096 
>>>> of DMA
>>>> mask ffffffff bus mask df000000
>>>>
>>>> All 5.x Linux kernels can't initialize a SCSI PCI card anymore so 
>>>> booting
>>>> of a Linux userland isn't possible.
>>>>
>>>> PLEASE check the DMA changes in the PowerPC updates 4.21-1 [1]. The 
>>>> kernel
>>>> 4.20 works with all PCI devices without limitation of RAM.
>>> Can you send me the .config and a dmesg?  And in the meantime try the
>>> patch below?
>>>
>>> ---
>>> >From 4d659b7311bd4141fdd3eeeb80fa2d7602ea01d4 Mon Sep 17 00:00:00 2001
>>> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>>> Date: Fri, 18 Oct 2019 13:00:43 +0200
>>> Subject: dma-direct: check for overflows on 32 bit DMA addresses
>>>
>>> As seen on the new Raspberry Pi 4 and sta2x11's DMA implementation 
>>> it is
>>> possible for a device configured with 32 bit DMA addresses and a 
>>> partial
>>> DMA mapping located at the end of the address space to overflow. It
>>> happens when a higher physical address, not DMAable, is translated to
>>> it's DMA counterpart.
>>>
>>> For example the Raspberry Pi 4, configurable up to 4 GB of memory, has
>>> an interconnect capable of addressing the lower 1 GB of physical memory
>>> with a DMA offset of 0xc0000000. It transpires that, any attempt to
>>> translate physical addresses higher than the first GB will result in an
>>> overflow which dma_capable() can't detect as it only checks for
>>> addresses bigger then the maximum allowed DMA address.
>>>
>>> Fix this by verifying in dma_capable() if the DMA address range 
>>> provided
>>> is at any point lower than the minimum possible DMA address on the bus.
>>>
>>> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>>> ---
>>>   include/linux/dma-direct.h | 8 ++++++++
>>>   1 file changed, 8 insertions(+)
>>>
>>> diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
>>> index adf993a3bd58..6ad9e9ea7564 100644
>>> --- a/include/linux/dma-direct.h
>>> +++ b/include/linux/dma-direct.h
>>> @@ -3,6 +3,7 @@
>>>   #define _LINUX_DMA_DIRECT_H 1
>>>     #include <linux/dma-mapping.h>
>>> +#include <linux/memblock.h> /* for min_low_pfn */
>>>   #include <linux/mem_encrypt.h>
>>>     #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA
>>> @@ -27,6 +28,13 @@ static inline bool dma_capable(struct device 
>>> *dev, dma_addr_t addr, size_t size)
>>>       if (!dev->dma_mask)
>>>           return false;
>>>   +#ifndef CONFIG_ARCH_DMA_ADDR_T_64BIT
>>> +    /* Check if DMA address overflowed */
>>> +    if (min(addr, addr + size - 1) <
>>> +        __phys_to_dma(dev, (phys_addr_t)(min_low_pfn << PAGE_SHIFT)))
>>> +        return false;
>>> +#endif
>>> +
>>>       return addr + size - 1 <=
>>>           min_not_zero(*dev->dma_mask, dev->bus_dma_mask);
>>>   }
>> Hello Christoph,
>>
>> Thanks a lot for your patch! Unfortunately this patch doesn't solve 
>> the issue.
>>
>> Error messages:
>>
>> [    6.041163] bttv: driver version 0.9.19 loaded
>> [    6.041167] bttv: using 8 buffers with 2080k (520 pages) each for 
>> capture
>> [    6.041559] bttv: Bt8xx card found (0)
>> [    6.041609] bttv: 0: Bt878 (rev 17) at 1000:04:05.0, irq: 19, 
>> latency: 128, mmio: 0xc20001000
>> [    6.041622] bttv: 0: using: Typhoon TView RDS + FM Stereo / KNC1 
>> TV Station RDS [card=53,insmod option]
>> [    6.042216] bttv: 0: tuner type=5
>> [    6.111994] bttv: 0: audio absent, no audio device found!
>> [    6.176425] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up 
>> to 100ms)
>> [    6.200005] bttv: PLL set ok
>> [    6.209351] bttv: 0: registered device video0
>> [    6.211576] bttv: 0: registered device vbi0
>> [    6.214897] bttv: 0: registered device radio0
>> [  114.218806] bttv 1000:04:05.0: overflow 0x00000000ff507000+4096 of 
>> DMA mask ffffffff bus mask df000000
>> [  114.218848] Modules linked in: rfcomm bnep tuner_simple 
>> tuner_types tea5767 tuner tda7432 tvaudio msp3400 bttv tea575x 
>> tveeprom videobuf_dma_sg videobuf_core rc_core videodev mc btusb 
>> btrtl btbcm btintel bluetooth uio_pdrv_genirq uio ecdh_generic ecc
>> [  114.219012] [c0000001ecddf720] [80000000008ff6e8] 
>> .buffer_prepare+0x150/0x268 [bttv]
>> [  114.219029] [c0000001ecddf860] [80000000008fff6c] 
>> .bttv_qbuf+0x50/0x64 [bttv]
>>
>> -----
>>
>> Trace:
>>
>> [  462.783184] Call Trace:
>> [  462.783187] [c0000001c6c67420] [c0000000000b3358] 
>> .report_addr+0xb8/0xc0 (unreliable)
>> [  462.783192] [c0000001c6c67490] [c0000000000b351c] 
>> .dma_direct_map_page+0xf0/0x128
>> [  462.783195] [c0000001c6c67530] [c0000000000b35b0] 
>> .dma_direct_map_sg+0x5c/0xac
>> [  462.783205] [c0000001c6c675e0] [8000000000862e88] 
>> .__videobuf_iolock+0x660/0x6d8 [videobuf_dma_sg]
>> [  462.783220] [c0000001c6c676b0] [8000000000854274] 
>> .videobuf_iolock+0x98/0xb4 [videobuf_core]
>> [  462.783271] [c0000001c6c67720] [80000000008686e8] 
>> .buffer_prepare+0x150/0x268 [bttv]
>> [  462.783276] [c0000001c6c677c0] [8000000000854afc] 
>> .videobuf_qbuf+0x2b8/0x428 [videobuf_core]
>> [  462.783288] [c0000001c6c67860] [8000000000868f6c] 
>> .bttv_qbuf+0x50/0x64 [bttv]
>> [  462.783383] [c0000001c6c678e0] [80000000007bf208] 
>> .v4l_qbuf+0x54/0x60 [videodev]
>> [  462.783402] [c0000001c6c67970] [80000000007c1eac] 
>> .__video_do_ioctl+0x30c/0x3f8 [videodev]
>> [  462.783421] [c0000001c6c67a80] [80000000007c3c08] 
>> .video_usercopy+0x18c/0x3dc [videodev]
>> [  462.783440] [c0000001c6c67c00] [80000000007bb14c] 
>> .v4l2_ioctl+0x60/0x78 [videodev]
>> [  462.783460] [c0000001c6c67c90] [80000000007d3c48] 
>> .v4l2_compat_ioctl32+0x9b4/0x1850 [videodev]
>> [  462.783468] [c0000001c6c67d70] [c0000000001ad9cc] 
>> .__se_compat_sys_ioctl+0x284/0x127c
>> [  462.783473] [c0000001c6c67e20] [c00000000000067c] 
>> system_call+0x60/0x6c
>> [  462.783475] Instruction dump:
>> [  462.783477] 40fe0044 60000000 892255d0 2f890000 40fe0020 3c82ffc5 
>> 39200001 60000000
>> [  462.783483] 38842029 992255d0 485ad0d9 60000000 <0fe00000> 
>> 38210070 e8010010 7c0803a6
>> [  462.783490] ---[ end trace b677d4a00458e277 ]---
>>
>> -----
>>
>> dmesg fsl p5040: https://bugzilla.kernel.org/attachment.cgi?id=285813
>>
>> Kernel 5.4-rc6 config for the Cyrus+ board and for the QEMU ppce500 
>> board (CPU: P5040 and P5020): 
>> https://bugzilla.kernel.org/attachment.cgi?id=285815
>>
>> Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=205201
>>
>> Thanks for your help,
>>
>> Christian
>
> Christoph,
>
> Do you have another patch for testing or shall I bisect?
>
> Thanks,
> Christian

Hi Christoph,

I have seen that I have activated the kernel config option 
CONFIG_ARCH_DMA_ADDR_T_64BIT. That means your code in your patch won't 
work if this kernel option is enabled.

+#ifndef CONFIG_ARCH_DMA_ADDR_T_64BIT
+    /* Check if DMA address overflowed */
+    if (min(addr, addr + size - 1) <
+        __phys_to_dma(dev, (phys_addr_t)(min_low_pfn << PAGE_SHIFT)))
+        return false;
+#endif

I will delete the lines with ifndef and endif and will try it again.

Cheers,
Christian

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: Bug 205201 - overflow of DMA mask and bus mask
  2019-11-11  8:12                                                                                       ` Christian Zigotzky
@ 2019-11-11  8:16                                                                                         ` Christian Zigotzky
  2019-11-11 12:22                                                                                           ` Christian Zigotzky
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-11-11  8:16 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, linux-kernel, linux-mm, iommu,
	Benjamin Herrenschmidt, paulus, darren, contact, rtd2,
	mad skateman, Rob Herring, linuxppc-dev

On 11 November 2019 at 09:12 am, Christian Zigotzky wrote:
> On 10 November 2019 at 08:27 am, Christian Zigotzky wrote:
>> On 07 November 2019 at 10:53 am, Christian Zigotzky wrote:
>>> On 05 November 2019 at 05:28 pm, Christoph Hellwig wrote:
>>>> On Tue, Nov 05, 2019 at 08:56:27AM +0100, Christian Zigotzky wrote:
>>>>> Hi All,
>>>>>
>>>>> We still have DMA problems with some PCI devices. Since the 
>>>>> PowerPC updates
>>>>> 4.21-1 [1] we need to decrease the RAM to 3500MB (mem=3500M) if we 
>>>>> want to
>>>>> work with our PCI devices. The FSL P5020 and P5040 have these 
>>>>> problems
>>>>> currently.
>>>>>
>>>>> Error message:
>>>>>
>>>>> [   25.654852] bttv 1000:04:05.0: overflow 0x00000000fe077000+4096 
>>>>> of DMA
>>>>> mask ffffffff bus mask df000000
>>>>>
>>>>> All 5.x Linux kernels can't initialize a SCSI PCI card anymore so 
>>>>> booting
>>>>> of a Linux userland isn't possible.
>>>>>
>>>>> PLEASE check the DMA changes in the PowerPC updates 4.21-1 [1]. 
>>>>> The kernel
>>>>> 4.20 works with all PCI devices without limitation of RAM.
>>>> Can you send me the .config and a dmesg?  And in the meantime try the
>>>> patch below?
>>>>
>>>> ---
>>>> >From 4d659b7311bd4141fdd3eeeb80fa2d7602ea01d4 Mon Sep 17 00:00:00 
>>>> 2001
>>>> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>>>> Date: Fri, 18 Oct 2019 13:00:43 +0200
>>>> Subject: dma-direct: check for overflows on 32 bit DMA addresses
>>>>
>>>> As seen on the new Raspberry Pi 4 and sta2x11's DMA implementation 
>>>> it is
>>>> possible for a device configured with 32 bit DMA addresses and a 
>>>> partial
>>>> DMA mapping located at the end of the address space to overflow. It
>>>> happens when a higher physical address, not DMAable, is translated to
>>>> it's DMA counterpart.
>>>>
>>>> For example the Raspberry Pi 4, configurable up to 4 GB of memory, has
>>>> an interconnect capable of addressing the lower 1 GB of physical 
>>>> memory
>>>> with a DMA offset of 0xc0000000. It transpires that, any attempt to
>>>> translate physical addresses higher than the first GB will result 
>>>> in an
>>>> overflow which dma_capable() can't detect as it only checks for
>>>> addresses bigger then the maximum allowed DMA address.
>>>>
>>>> Fix this by verifying in dma_capable() if the DMA address range 
>>>> provided
>>>> is at any point lower than the minimum possible DMA address on the 
>>>> bus.
>>>>
>>>> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>>>> ---
>>>>   include/linux/dma-direct.h | 8 ++++++++
>>>>   1 file changed, 8 insertions(+)
>>>>
>>>> diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
>>>> index adf993a3bd58..6ad9e9ea7564 100644
>>>> --- a/include/linux/dma-direct.h
>>>> +++ b/include/linux/dma-direct.h
>>>> @@ -3,6 +3,7 @@
>>>>   #define _LINUX_DMA_DIRECT_H 1
>>>>     #include <linux/dma-mapping.h>
>>>> +#include <linux/memblock.h> /* for min_low_pfn */
>>>>   #include <linux/mem_encrypt.h>
>>>>     #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA
>>>> @@ -27,6 +28,13 @@ static inline bool dma_capable(struct device 
>>>> *dev, dma_addr_t addr, size_t size)
>>>>       if (!dev->dma_mask)
>>>>           return false;
>>>>   +#ifndef CONFIG_ARCH_DMA_ADDR_T_64BIT
>>>> +    /* Check if DMA address overflowed */
>>>> +    if (min(addr, addr + size - 1) <
>>>> +        __phys_to_dma(dev, (phys_addr_t)(min_low_pfn << PAGE_SHIFT)))
>>>> +        return false;
>>>> +#endif
>>>> +
>>>>       return addr + size - 1 <=
>>>>           min_not_zero(*dev->dma_mask, dev->bus_dma_mask);
>>>>   }
>>> Hello Christoph,
>>>
>>> Thanks a lot for your patch! Unfortunately this patch doesn't solve 
>>> the issue.
>>>
>>> Error messages:
>>>
>>> [    6.041163] bttv: driver version 0.9.19 loaded
>>> [    6.041167] bttv: using 8 buffers with 2080k (520 pages) each for 
>>> capture
>>> [    6.041559] bttv: Bt8xx card found (0)
>>> [    6.041609] bttv: 0: Bt878 (rev 17) at 1000:04:05.0, irq: 19, 
>>> latency: 128, mmio: 0xc20001000
>>> [    6.041622] bttv: 0: using: Typhoon TView RDS + FM Stereo / KNC1 
>>> TV Station RDS [card=53,insmod option]
>>> [    6.042216] bttv: 0: tuner type=5
>>> [    6.111994] bttv: 0: audio absent, no audio device found!
>>> [    6.176425] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up 
>>> to 100ms)
>>> [    6.200005] bttv: PLL set ok
>>> [    6.209351] bttv: 0: registered device video0
>>> [    6.211576] bttv: 0: registered device vbi0
>>> [    6.214897] bttv: 0: registered device radio0
>>> [  114.218806] bttv 1000:04:05.0: overflow 0x00000000ff507000+4096 
>>> of DMA mask ffffffff bus mask df000000
>>> [  114.218848] Modules linked in: rfcomm bnep tuner_simple 
>>> tuner_types tea5767 tuner tda7432 tvaudio msp3400 bttv tea575x 
>>> tveeprom videobuf_dma_sg videobuf_core rc_core videodev mc btusb 
>>> btrtl btbcm btintel bluetooth uio_pdrv_genirq uio ecdh_generic ecc
>>> [  114.219012] [c0000001ecddf720] [80000000008ff6e8] 
>>> .buffer_prepare+0x150/0x268 [bttv]
>>> [  114.219029] [c0000001ecddf860] [80000000008fff6c] 
>>> .bttv_qbuf+0x50/0x64 [bttv]
>>>
>>> -----
>>>
>>> Trace:
>>>
>>> [  462.783184] Call Trace:
>>> [  462.783187] [c0000001c6c67420] [c0000000000b3358] 
>>> .report_addr+0xb8/0xc0 (unreliable)
>>> [  462.783192] [c0000001c6c67490] [c0000000000b351c] 
>>> .dma_direct_map_page+0xf0/0x128
>>> [  462.783195] [c0000001c6c67530] [c0000000000b35b0] 
>>> .dma_direct_map_sg+0x5c/0xac
>>> [  462.783205] [c0000001c6c675e0] [8000000000862e88] 
>>> .__videobuf_iolock+0x660/0x6d8 [videobuf_dma_sg]
>>> [  462.783220] [c0000001c6c676b0] [8000000000854274] 
>>> .videobuf_iolock+0x98/0xb4 [videobuf_core]
>>> [  462.783271] [c0000001c6c67720] [80000000008686e8] 
>>> .buffer_prepare+0x150/0x268 [bttv]
>>> [  462.783276] [c0000001c6c677c0] [8000000000854afc] 
>>> .videobuf_qbuf+0x2b8/0x428 [videobuf_core]
>>> [  462.783288] [c0000001c6c67860] [8000000000868f6c] 
>>> .bttv_qbuf+0x50/0x64 [bttv]
>>> [  462.783383] [c0000001c6c678e0] [80000000007bf208] 
>>> .v4l_qbuf+0x54/0x60 [videodev]
>>> [  462.783402] [c0000001c6c67970] [80000000007c1eac] 
>>> .__video_do_ioctl+0x30c/0x3f8 [videodev]
>>> [  462.783421] [c0000001c6c67a80] [80000000007c3c08] 
>>> .video_usercopy+0x18c/0x3dc [videodev]
>>> [  462.783440] [c0000001c6c67c00] [80000000007bb14c] 
>>> .v4l2_ioctl+0x60/0x78 [videodev]
>>> [  462.783460] [c0000001c6c67c90] [80000000007d3c48] 
>>> .v4l2_compat_ioctl32+0x9b4/0x1850 [videodev]
>>> [  462.783468] [c0000001c6c67d70] [c0000000001ad9cc] 
>>> .__se_compat_sys_ioctl+0x284/0x127c
>>> [  462.783473] [c0000001c6c67e20] [c00000000000067c] 
>>> system_call+0x60/0x6c
>>> [  462.783475] Instruction dump:
>>> [  462.783477] 40fe0044 60000000 892255d0 2f890000 40fe0020 3c82ffc5 
>>> 39200001 60000000
>>> [  462.783483] 38842029 992255d0 485ad0d9 60000000 <0fe00000> 
>>> 38210070 e8010010 7c0803a6
>>> [  462.783490] ---[ end trace b677d4a00458e277 ]---
>>>
>>> -----
>>>
>>> dmesg fsl p5040: https://bugzilla.kernel.org/attachment.cgi?id=285813
>>>
>>> Kernel 5.4-rc6 config for the Cyrus+ board and for the QEMU ppce500 
>>> board (CPU: P5040 and P5020): 
>>> https://bugzilla.kernel.org/attachment.cgi?id=285815
>>>
>>> Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=205201
>>>
>>> Thanks for your help,
>>>
>>> Christian
>>
>> Christoph,
>>
>> Do you have another patch for testing or shall I bisect?
>>
>> Thanks,
>> Christian
>
> Hi Christoph,
>
> I have seen that I have activated the kernel config option 
> CONFIG_ARCH_DMA_ADDR_T_64BIT. That means your code in your patch won't 
> work if this kernel option is enabled.
>
> +#ifndef CONFIG_ARCH_DMA_ADDR_T_64BIT
> +    /* Check if DMA address overflowed */
> +    if (min(addr, addr + size - 1) <
> +        __phys_to_dma(dev, (phys_addr_t)(min_low_pfn << PAGE_SHIFT)))
> +        return false;
> +#endif
>
> I will delete the lines with ifndef and endif and will try it again.
>
> Cheers,
> Christian

Christoph,

I have seen that the patch above isn't from you. It's from Nicolas Saenz 
Julienne.

Cheers,
Christian

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: Bug 205201 - overflow of DMA mask and bus mask
  2019-11-11  8:16                                                                                         ` Christian Zigotzky
@ 2019-11-11 12:22                                                                                           ` Christian Zigotzky
  2019-11-12 14:41                                                                                             ` Christoph Hellwig
  0 siblings, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-11-11 12:22 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, linux-kernel, linux-mm, iommu,
	Benjamin Herrenschmidt, paulus, darren, contact, rtd2,
	mad skateman, Rob Herring, linuxppc-dev, nsaenzjulienne

On 11 November 2019 at 09:16 am, Christian Zigotzky wrote:
> On 11 November 2019 at 09:12 am, Christian Zigotzky wrote:
>> On 10 November 2019 at 08:27 am, Christian Zigotzky wrote:
>>> On 07 November 2019 at 10:53 am, Christian Zigotzky wrote:
>>>> On 05 November 2019 at 05:28 pm, Christoph Hellwig wrote:
>>>>> On Tue, Nov 05, 2019 at 08:56:27AM +0100, Christian Zigotzky wrote:
>>>>>> Hi All,
>>>>>>
>>>>>> We still have DMA problems with some PCI devices. Since the 
>>>>>> PowerPC updates
>>>>>> 4.21-1 [1] we need to decrease the RAM to 3500MB (mem=3500M) if 
>>>>>> we want to
>>>>>> work with our PCI devices. The FSL P5020 and P5040 have these 
>>>>>> problems
>>>>>> currently.
>>>>>>
>>>>>> Error message:
>>>>>>
>>>>>> [   25.654852] bttv 1000:04:05.0: overflow 
>>>>>> 0x00000000fe077000+4096 of DMA
>>>>>> mask ffffffff bus mask df000000
>>>>>>
>>>>>> All 5.x Linux kernels can't initialize a SCSI PCI card anymore so 
>>>>>> booting
>>>>>> of a Linux userland isn't possible.
>>>>>>
>>>>>> PLEASE check the DMA changes in the PowerPC updates 4.21-1 [1]. 
>>>>>> The kernel
>>>>>> 4.20 works with all PCI devices without limitation of RAM.
>>>>> Can you send me the .config and a dmesg?  And in the meantime try the
>>>>> patch below?
>>>>>
>>>>> ---
>>>>> >From 4d659b7311bd4141fdd3eeeb80fa2d7602ea01d4 Mon Sep 17 00:00:00 
>>>>> 2001
>>>>> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>>>>> Date: Fri, 18 Oct 2019 13:00:43 +0200
>>>>> Subject: dma-direct: check for overflows on 32 bit DMA addresses
>>>>>
>>>>> As seen on the new Raspberry Pi 4 and sta2x11's DMA implementation 
>>>>> it is
>>>>> possible for a device configured with 32 bit DMA addresses and a 
>>>>> partial
>>>>> DMA mapping located at the end of the address space to overflow. It
>>>>> happens when a higher physical address, not DMAable, is translated to
>>>>> it's DMA counterpart.
>>>>>
>>>>> For example the Raspberry Pi 4, configurable up to 4 GB of memory, 
>>>>> has
>>>>> an interconnect capable of addressing the lower 1 GB of physical 
>>>>> memory
>>>>> with a DMA offset of 0xc0000000. It transpires that, any attempt to
>>>>> translate physical addresses higher than the first GB will result 
>>>>> in an
>>>>> overflow which dma_capable() can't detect as it only checks for
>>>>> addresses bigger then the maximum allowed DMA address.
>>>>>
>>>>> Fix this by verifying in dma_capable() if the DMA address range 
>>>>> provided
>>>>> is at any point lower than the minimum possible DMA address on the 
>>>>> bus.
>>>>>
>>>>> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>>>>> ---
>>>>>   include/linux/dma-direct.h | 8 ++++++++
>>>>>   1 file changed, 8 insertions(+)
>>>>>
>>>>> diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
>>>>> index adf993a3bd58..6ad9e9ea7564 100644
>>>>> --- a/include/linux/dma-direct.h
>>>>> +++ b/include/linux/dma-direct.h
>>>>> @@ -3,6 +3,7 @@
>>>>>   #define _LINUX_DMA_DIRECT_H 1
>>>>>     #include <linux/dma-mapping.h>
>>>>> +#include <linux/memblock.h> /* for min_low_pfn */
>>>>>   #include <linux/mem_encrypt.h>
>>>>>     #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA
>>>>> @@ -27,6 +28,13 @@ static inline bool dma_capable(struct device 
>>>>> *dev, dma_addr_t addr, size_t size)
>>>>>       if (!dev->dma_mask)
>>>>>           return false;
>>>>>   +#ifndef CONFIG_ARCH_DMA_ADDR_T_64BIT
>>>>> +    /* Check if DMA address overflowed */
>>>>> +    if (min(addr, addr + size - 1) <
>>>>> +        __phys_to_dma(dev, (phys_addr_t)(min_low_pfn << 
>>>>> PAGE_SHIFT)))
>>>>> +        return false;
>>>>> +#endif
>>>>> +
>>>>>       return addr + size - 1 <=
>>>>>           min_not_zero(*dev->dma_mask, dev->bus_dma_mask);
>>>>>   }
>>>> Hello Christoph,
>>>>
>>>> Thanks a lot for your patch! Unfortunately this patch doesn't solve 
>>>> the issue.
>>>>
>>>> Error messages:
>>>>
>>>> [    6.041163] bttv: driver version 0.9.19 loaded
>>>> [    6.041167] bttv: using 8 buffers with 2080k (520 pages) each 
>>>> for capture
>>>> [    6.041559] bttv: Bt8xx card found (0)
>>>> [    6.041609] bttv: 0: Bt878 (rev 17) at 1000:04:05.0, irq: 19, 
>>>> latency: 128, mmio: 0xc20001000
>>>> [    6.041622] bttv: 0: using: Typhoon TView RDS + FM Stereo / KNC1 
>>>> TV Station RDS [card=53,insmod option]
>>>> [    6.042216] bttv: 0: tuner type=5
>>>> [    6.111994] bttv: 0: audio absent, no audio device found!
>>>> [    6.176425] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up 
>>>> to 100ms)
>>>> [    6.200005] bttv: PLL set ok
>>>> [    6.209351] bttv: 0: registered device video0
>>>> [    6.211576] bttv: 0: registered device vbi0
>>>> [    6.214897] bttv: 0: registered device radio0
>>>> [  114.218806] bttv 1000:04:05.0: overflow 0x00000000ff507000+4096 
>>>> of DMA mask ffffffff bus mask df000000
>>>> [  114.218848] Modules linked in: rfcomm bnep tuner_simple 
>>>> tuner_types tea5767 tuner tda7432 tvaudio msp3400 bttv tea575x 
>>>> tveeprom videobuf_dma_sg videobuf_core rc_core videodev mc btusb 
>>>> btrtl btbcm btintel bluetooth uio_pdrv_genirq uio ecdh_generic ecc
>>>> [  114.219012] [c0000001ecddf720] [80000000008ff6e8] 
>>>> .buffer_prepare+0x150/0x268 [bttv]
>>>> [  114.219029] [c0000001ecddf860] [80000000008fff6c] 
>>>> .bttv_qbuf+0x50/0x64 [bttv]
>>>>
>>>> -----
>>>>
>>>> Trace:
>>>>
>>>> [  462.783184] Call Trace:
>>>> [  462.783187] [c0000001c6c67420] [c0000000000b3358] 
>>>> .report_addr+0xb8/0xc0 (unreliable)
>>>> [  462.783192] [c0000001c6c67490] [c0000000000b351c] 
>>>> .dma_direct_map_page+0xf0/0x128
>>>> [  462.783195] [c0000001c6c67530] [c0000000000b35b0] 
>>>> .dma_direct_map_sg+0x5c/0xac
>>>> [  462.783205] [c0000001c6c675e0] [8000000000862e88] 
>>>> .__videobuf_iolock+0x660/0x6d8 [videobuf_dma_sg]
>>>> [  462.783220] [c0000001c6c676b0] [8000000000854274] 
>>>> .videobuf_iolock+0x98/0xb4 [videobuf_core]
>>>> [  462.783271] [c0000001c6c67720] [80000000008686e8] 
>>>> .buffer_prepare+0x150/0x268 [bttv]
>>>> [  462.783276] [c0000001c6c677c0] [8000000000854afc] 
>>>> .videobuf_qbuf+0x2b8/0x428 [videobuf_core]
>>>> [  462.783288] [c0000001c6c67860] [8000000000868f6c] 
>>>> .bttv_qbuf+0x50/0x64 [bttv]
>>>> [  462.783383] [c0000001c6c678e0] [80000000007bf208] 
>>>> .v4l_qbuf+0x54/0x60 [videodev]
>>>> [  462.783402] [c0000001c6c67970] [80000000007c1eac] 
>>>> .__video_do_ioctl+0x30c/0x3f8 [videodev]
>>>> [  462.783421] [c0000001c6c67a80] [80000000007c3c08] 
>>>> .video_usercopy+0x18c/0x3dc [videodev]
>>>> [  462.783440] [c0000001c6c67c00] [80000000007bb14c] 
>>>> .v4l2_ioctl+0x60/0x78 [videodev]
>>>> [  462.783460] [c0000001c6c67c90] [80000000007d3c48] 
>>>> .v4l2_compat_ioctl32+0x9b4/0x1850 [videodev]
>>>> [  462.783468] [c0000001c6c67d70] [c0000000001ad9cc] 
>>>> .__se_compat_sys_ioctl+0x284/0x127c
>>>> [  462.783473] [c0000001c6c67e20] [c00000000000067c] 
>>>> system_call+0x60/0x6c
>>>> [  462.783475] Instruction dump:
>>>> [  462.783477] 40fe0044 60000000 892255d0 2f890000 40fe0020 
>>>> 3c82ffc5 39200001 60000000
>>>> [  462.783483] 38842029 992255d0 485ad0d9 60000000 <0fe00000> 
>>>> 38210070 e8010010 7c0803a6
>>>> [  462.783490] ---[ end trace b677d4a00458e277 ]---
>>>>
>>>> -----
>>>>
>>>> dmesg fsl p5040: https://bugzilla.kernel.org/attachment.cgi?id=285813
>>>>
>>>> Kernel 5.4-rc6 config for the Cyrus+ board and for the QEMU ppce500 
>>>> board (CPU: P5040 and P5020): 
>>>> https://bugzilla.kernel.org/attachment.cgi?id=285815
>>>>
>>>> Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=205201
>>>>
>>>> Thanks for your help,
>>>>
>>>> Christian
>>>
>>> Christoph,
>>>
>>> Do you have another patch for testing or shall I bisect?
>>>
>>> Thanks,
>>> Christian
>>
>> Hi Christoph,
>>
>> I have seen that I have activated the kernel config option 
>> CONFIG_ARCH_DMA_ADDR_T_64BIT. That means your code in your patch 
>> won't work if this kernel option is enabled.
>>
>> +#ifndef CONFIG_ARCH_DMA_ADDR_T_64BIT
>> +    /* Check if DMA address overflowed */
>> +    if (min(addr, addr + size - 1) <
>> +        __phys_to_dma(dev, (phys_addr_t)(min_low_pfn << PAGE_SHIFT)))
>> +        return false;
>> +#endif
>>
>> I will delete the lines with ifndef and endif and will try it again.
>>
>> Cheers,
>> Christian
>
> Christoph,
>
> I have seen that the patch above isn't from you. It's from Nicolas 
> Saenz Julienne.
>
> Cheers,
> Christian

Christoph,

Now, I can definitely say that this patch does not solve the issue.

Do you have another patch for testing or shall I bisect?

Thanks,
Christian

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: Bug 205201 - overflow of DMA mask and bus mask
  2019-11-11 12:22                                                                                           ` Christian Zigotzky
@ 2019-11-12 14:41                                                                                             ` Christoph Hellwig
  2019-11-12 22:58                                                                                               ` Christian Zigotzky
  2019-11-13 10:14                                                                                               ` Christian Zigotzky
  0 siblings, 2 replies; 178+ messages in thread
From: Christoph Hellwig @ 2019-11-12 14:41 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, linux-kernel, linux-mm, iommu,
	Benjamin Herrenschmidt, paulus, darren, contact, rtd2,
	mad skateman, Rob Herring, linuxppc-dev, nsaenzjulienne

On Mon, Nov 11, 2019 at 01:22:55PM +0100, Christian Zigotzky wrote:
> Now, I can definitely say that this patch does not solve the issue.
>
> Do you have another patch for testing or shall I bisect?

I'm still interested in the .config and dmesg.  Especially if the
board is using arch/powerpc/sysdev/fsl_pci.c, which is the only
place inside the powerpc arch code doing funny things with the
bus_dma_mask, which Robin pointed out looks fishy.

>
> Thanks,
> Christian
---end quoted text---

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: Bug 205201 - overflow of DMA mask and bus mask
  2019-11-12 14:41                                                                                             ` Christoph Hellwig
@ 2019-11-12 22:58                                                                                               ` Christian Zigotzky
  2019-11-13 10:14                                                                                               ` Christian Zigotzky
  1 sibling, 0 replies; 178+ messages in thread
From: Christian Zigotzky @ 2019-11-12 22:58 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, linux-kernel, linux-mm, iommu,
	Benjamin Herrenschmidt, paulus, darren, contact, rtd2,
	mad skateman, Rob Herring, linuxppc-dev, nsaenzjulienne

On 12 November 2019 at 3:41 pm, Christoph Hellwig wrote:
> On Mon, Nov 11, 2019 at 01:22:55PM +0100, Christian Zigotzky wrote:
>> Now, I can definitely say that this patch does not solve the issue.
>>
>> Do you have another patch for testing or shall I bisect?
> I'm still interested in the .config and dmesg.  Especially if the
> board is using arch/powerpc/sysdev/fsl_pci.c, which is the only
> place inside the powerpc arch code doing funny things with the
> bus_dma_mask, which Robin pointed out looks fishy.
>
Here you are:

.config: https://bugzilla.kernel.org/attachment.cgi?id=285815

dmesg: https://bugzilla.kernel.org/attachment.cgi?id=285813

Thanks

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: Bug 205201 - overflow of DMA mask and bus mask
  2019-11-12 14:41                                                                                             ` Christoph Hellwig
  2019-11-12 22:58                                                                                               ` Christian Zigotzky
@ 2019-11-13 10:14                                                                                               ` Christian Zigotzky
  2019-11-13 11:02                                                                                                 ` Christoph Hellwig
  1 sibling, 1 reply; 178+ messages in thread
From: Christian Zigotzky @ 2019-11-13 10:14 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: linux-arch, linux-kernel, linux-mm, iommu,
	Benjamin Herrenschmidt, paulus, darren, contact, rtd2,
	mad skateman, Rob Herring, linuxppc-dev, nsaenzjulienne

Hello Christoph,

I have found the issue. :-)

GFP_DMA32 was renamed to GFP_DMA in the PowerPC updates 4.21-1 in 
December last year.

Some PCI devices still use GFP_DMA32 (grep -r GFP_DMA32 *). I renamed 
GFP_DMA32 to GFP_DMA in the file 
"drivers/media/v4l2-core/videobuf-dma-sg.c". After compiling the RC7 of 
kernel 5.4 my TV card works again.

Cheers,
Christian


On 12 November 2019 at 3:41 pm, Christoph Hellwig wrote:
> On Mon, Nov 11, 2019 at 01:22:55PM +0100, Christian Zigotzky wrote:
>> Now, I can definitely say that this patch does not solve the issue.
>>
>> Do you have another patch for testing or shall I bisect?
> I'm still interested in the .config and dmesg.  Especially if the
> board is using arch/powerpc/sysdev/fsl_pci.c, which is the only
> place inside the powerpc arch code doing funny things with the
> bus_dma_mask, which Robin pointed out looks fishy.
>
>> Thanks,
>> Christian
> ---end quoted text---
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: Bug 205201 - overflow of DMA mask and bus mask
  2019-11-13 10:14                                                                                               ` Christian Zigotzky
@ 2019-11-13 11:02                                                                                                 ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2019-11-13 11:02 UTC (permalink / raw)
  To: Christian Zigotzky
  Cc: Christoph Hellwig, linux-arch, linux-kernel, linux-mm, iommu,
	Benjamin Herrenschmidt, paulus, darren, contact, rtd2,
	mad skateman, Rob Herring, linuxppc-dev, nsaenzjulienne

Interesting.  Give me some time to come up with a real fix, as drivers
really should not mess with GFP flags for these allocations, and even
if they did swiotlb is supposed to take care of any resulting problems.

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: Bug 205201 - overflow of DMA mask and bus mask
  2019-11-06 14:09                                                                                   ` Robin Murphy
@ 2019-11-21 17:26                                                                                     ` Christoph Hellwig
  0 siblings, 0 replies; 178+ messages in thread
From: Christoph Hellwig @ 2019-11-21 17:26 UTC (permalink / raw)
  To: Robin Murphy
  Cc: Christoph Hellwig, Christian Zigotzky, linux-arch, linux-kernel,
	linux-mm, iommu

On Wed, Nov 06, 2019 at 02:09:26PM +0000, Robin Murphy wrote:
> Hmm, that bus mask looks pretty wacky - are you able to figure out where 
> that's coming from?

arch/powerpc/sysdev/fsl_pci.c:pci_dma_dev_setup_swiotlb().

^ permalink raw reply	[flat|nested] 178+ messages in thread

* Re: use generic DMA mapping code in powerpc V4
  2018-11-28 15:55     ` Christian Zigotzky
  2018-11-28 20:02       ` Christian Zigotzky
  2018-11-28 20:35       ` Michal Suchánek
@ 2019-12-19 13:54       ` Christian Zigotzky
  2 siblings, 0 replies; 178+ messages in thread
From: Christian Zigotzky @ 2019-12-19 13:54 UTC (permalink / raw)
  To: Michael Ellerman, Christoph Hellwig, Benjamin Herrenschmidt,
	Paul Mackerras
  Cc: linux-arch, linux-mm, iommu, linuxppc-dev, linux-kernel,
	R.T.Dickinson, contact, mad skateman, Darren Stevens

Hi All,

We still have some issues with PCI cards in our FSL P5020 and P5040 
systems since the DMA mapping updates. [1, 2]

We have to limit the RAM to 3500MB for some problematic PCI cards. 
(kernel boot argument 'mem=3500M')

The problematic DMA mapping code was added with the PowerPC updates 
4.21-1 to the official kernel source code last year. [3]

We have created a bug report. [4]

The old 4.x kernels aren't affected because they use the old DMA code.

Please check the new DMA code again.

Thanks,
Christian

[1] 
http://forum.hyperion-entertainment.com/viewtopic.php?f=58&p=49486#p49486
[2] 
http://forum.hyperion-entertainment.com/viewtopic.php?f=58&t=4349&start=50#p49099
[3] 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8d6973327ee84c2f40dd9efd8928d4a1186c96e2
[4] https://bugzilla.kernel.org/show_bug.cgi?id=205201


On 28 November 2018 at 4:55 pm, Christian Zigotzky wrote:
> On 28 November 2018 at 12:05PM, Michael Ellerman wrote:
>> Nothing specific yet.
>>
>> I'm a bit worried it might break one of the many old obscure platforms
>> we have that aren't well tested.
>>
> Please don't apply the new DMA mapping code if you don't be sure if it 
> works on all supported PowerPC machines. Is the new DMA mapping code 
> really necessary? It's not really nice, to rewrote code if the old 
> code works perfect. We must not forget, that we work for the end 
> users. Does the end user have advantages with this new code? Is it 
> faster? The old code works without any problems. I am also worried 
> about this code. How can I test this new DMA mapping code?
>
> Thanks
>
>


^ permalink raw reply	[flat|nested] 178+ messages in thread

end of thread, other threads:[~2019-12-19 13:55 UTC | newest]

Thread overview: 178+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-14  8:22 use generic DMA mapping code in powerpc V4 Christoph Hellwig
2018-11-14  8:22 ` [PATCH 01/34] powerpc: use mm zones more sensibly Christoph Hellwig
2018-12-06 14:09   ` Christoph Hellwig
2018-12-07 12:18     ` Michael Ellerman
2018-12-07 14:09       ` Christoph Hellwig
2018-12-07 15:04         ` Christian Zigotzky
2018-11-14  8:22 ` [PATCH 02/34] powerpc: allow NOT_COHERENT_CACHE for amigaone Christoph Hellwig
2018-12-06 14:09   ` Christoph Hellwig
2018-11-14  8:22 ` [PATCH 03/34] powerpc/dma: remove the unused ARCH_HAS_DMA_MMAP_COHERENT define Christoph Hellwig
2018-12-06 14:09   ` Christoph Hellwig
2018-11-14  8:22 ` [PATCH 04/34] powerpc/dma: remove the unused ISA_DMA_THRESHOLD export Christoph Hellwig
2018-12-06 14:10   ` Christoph Hellwig
2018-11-14  8:22 ` [PATCH 05/34] powerpc/dma: remove the unused dma_iommu_ops export Christoph Hellwig
2018-12-06 14:10   ` Christoph Hellwig
2018-11-14  8:22 ` [PATCH 06/34] powerpc/dma: split the two __dma_alloc_coherent implementations Christoph Hellwig
2018-12-06 14:10   ` Christoph Hellwig
2018-11-14  8:22 ` [PATCH 07/34] powerpc/dma: remove the no-op dma_nommu_unmap_{page,sg} routines Christoph Hellwig
2018-12-06 14:10   ` [PATCH 07/34] powerpc/dma: remove the no-op dma_nommu_unmap_{page, sg} routines Christoph Hellwig
2018-11-14  8:22 ` [PATCH 08/34] powerpc/dma: untangle vio_dma_mapping_ops from dma_iommu_ops Christoph Hellwig
2018-12-06 14:10   ` Christoph Hellwig
2018-11-14  8:22 ` [PATCH 09/34] powerpc/dma: handle iommu bypass in dma_iommu_ops Christoph Hellwig
2018-11-14  8:22 ` [PATCH 10/34] powerpc/pseries: unwind dma_get_required_mask_pSeriesLP a bit Christoph Hellwig
2018-11-14  8:22 ` [PATCH 11/34] powerpc/pseries: use the generic iommu bypass code Christoph Hellwig
2018-11-14  8:22 ` [PATCH 12/34] powerpc/cell: move dma direct window setup out of dma_configure Christoph Hellwig
2018-12-09 10:23   ` Michael Ellerman
2018-12-12 14:36     ` Christoph Hellwig
2018-12-14 13:29       ` Michael Ellerman
2018-12-14 16:42         ` Christoph Hellwig
2018-11-14  8:22 ` [PATCH 13/34] powerpc/cell: use the generic iommu bypass code Christoph Hellwig
2018-11-14  8:22 ` [PATCH 14/34] powerpc/dart: remove dead cleanup code in iommu_init_early_dart Christoph Hellwig
2018-12-06 14:11   ` Christoph Hellwig
2018-11-14  8:22 ` [PATCH 15/34] powerpc/dart: use the generic iommu bypass code Christoph Hellwig
2018-11-14  8:22 ` [PATCH 16/34] powerpc/powernv: remove pnv_pci_ioda_pe_single_vendor Christoph Hellwig
2018-11-14  8:22 ` [PATCH 17/34] powerpc/powernv: remove pnv_npu_dma_set_mask Christoph Hellwig
2018-11-14  8:22 ` [PATCH 18/34] powerpc/powernv: use the generic iommu bypass code Christoph Hellwig
2018-11-14  8:22 ` [PATCH 19/34] cxl: drop the dma_set_mask callback from vphb Christoph Hellwig
2018-12-06 14:10   ` Christoph Hellwig
2018-11-14  8:23 ` [PATCH 20/34] powerpc/dma: stop overriding dma_get_required_mask Christoph Hellwig
2018-11-14  8:23 ` [PATCH 21/34] powerpc/pci: remove the dma_set_mask pci_controller ops methods Christoph Hellwig
2018-11-14  8:23 ` [PATCH 22/34] powerpc/dma: remove the iommu fallback for coherent allocations Christoph Hellwig
2018-11-14  8:23 ` [PATCH 23/34] powerpc/dma: remove get_pci_dma_ops Christoph Hellwig
2018-11-14  8:23 ` [PATCH 24/34] powerpc/dma: move pci_dma_dev_setup_swiotlb to fsl_pci.c Christoph Hellwig
2018-11-14  8:23 ` [PATCH 25/34] powerpc/dma: remove max_direct_dma_addr Christoph Hellwig
2018-11-14  8:23 ` [PATCH 26/34] powerpc/dma: fix an off-by-one in dma_capable Christoph Hellwig
2018-11-14  8:23 ` [PATCH 27/34] powerpc/fsl_pci: simplify fsl_pci_dma_set_mask Christoph Hellwig
2018-11-14  8:23 ` [PATCH 28/34] dma-mapping, powerpc: simplify the arch dma_set_mask override Christoph Hellwig
2018-11-14  8:23 ` [PATCH 29/34] powerpc/dma: use phys_to_dma instead of get_dma_offset Christoph Hellwig
2018-11-14  8:23 ` [PATCH 30/34] powerpc/dma: remove dma_nommu_mmap_coherent Christoph Hellwig
2018-11-14  8:23 ` [PATCH 31/34] powerpc/dma: use generic direct and swiotlb ops Christoph Hellwig
2018-11-14  8:23 ` [PATCH 32/34] powerpc/dma: remove get_dma_offset Christoph Hellwig
2018-11-14  8:23 ` [PATCH 33/34] powerpc/dma: remove set_dma_offset Christoph Hellwig
2018-11-14  8:23 ` [PATCH 34/34] powerpc/dma: trim the fat from <asm/dma-mapping.h> Christoph Hellwig
2018-11-27  7:42 ` use generic DMA mapping code in powerpc V4 Christoph Hellwig
2018-11-27 22:05   ` Benjamin Herrenschmidt
2018-11-28 11:05   ` Michael Ellerman
2018-11-28 15:55     ` Christian Zigotzky
2018-11-28 20:02       ` Christian Zigotzky
2018-11-28 20:35       ` Michal Suchánek
2018-11-29 17:03         ` Christoph Hellwig
2019-12-19 13:54       ` Christian Zigotzky
2018-11-29 12:05     ` Christian Zigotzky
2018-11-29 15:30       ` Christian Zigotzky
2018-11-29 17:03       ` Christoph Hellwig
2018-11-29 23:07         ` Christian Zigotzky
2018-11-30 10:53           ` Christoph Hellwig
2018-11-30 12:23             ` Christian Zigotzky
2018-11-30 13:10               ` Christoph Hellwig
2018-11-30 15:29                 ` Christian Zigotzky
2018-12-04  7:31                   ` Christian Zigotzky
2018-12-04  9:53                     ` Christian Zigotzky
2018-12-04 14:24                       ` Christoph Hellwig
2018-12-05  9:44                         ` Christian Zigotzky
2018-12-05 14:05                           ` Christoph Hellwig
2018-12-06 10:55                             ` Christian Zigotzky
2018-12-06 17:10                               ` Christian Zigotzky
2018-12-06 19:36                                 ` Christoph Hellwig
2018-12-07  7:48                                   ` Christian Zigotzky
2018-12-07 13:45                               ` Christian Zigotzky
2018-12-07 18:33                                 ` Christian Zigotzky
2018-12-08 10:29                                   ` Christian Zigotzky
2018-12-08 13:47                                     ` Christian Zigotzky
2018-12-09 14:20                                       ` Christian Zigotzky
2018-12-09 18:26                                         ` Christian Zigotzky
2018-12-10 15:54                                           ` Christian Zigotzky
2018-12-11 14:28                                             ` Christian Zigotzky
2018-12-11 18:17                                               ` Christian Zigotzky
2018-12-12  0:47                                                 ` Benjamin Herrenschmidt
2018-12-12  7:03                                                   ` Christian Zigotzky
2018-12-12 14:15                                                 ` Christoph Hellwig
2018-12-12 14:39                                                   ` Christian Zigotzky
2018-12-13  8:41                                                     ` Christian Zigotzky
2018-12-13  9:10                                                       ` Christoph Hellwig
2018-12-13  9:47                                                         ` Christian Zigotzky
2018-12-13 11:19                                                           ` Christian Zigotzky
2018-12-13 11:25                                                             ` Christoph Hellwig
2018-12-13 13:34                                                               ` Christian Zigotzky
2018-12-13 17:48                                                                 ` Christian Zigotzky
2018-12-13 21:53                                                                   ` Christian Zigotzky
2018-12-14 12:00                                                                     ` Christian Zigotzky
2018-12-14 16:45                                                                       ` Christoph Hellwig
2019-01-03  7:36                                                                       ` Christoph Hellwig
2019-01-03 19:26                                                                         ` Christian Zigotzky
2019-01-05 16:03                                                                           ` Christian Zigotzky
2019-01-09  9:31                                                                             ` Christian Zigotzky
2019-01-11  2:10                                                                               ` Christian Zigotzky
2019-01-12 18:14                                                                                 ` Christian Zigotzky
2019-01-15  8:07                                                                                   ` Christian Zigotzky
2019-01-15  8:49                                                                                     ` Christian Zigotzky
2019-01-15 10:55                                                                                       ` Christian Zigotzky
2019-01-15 13:35                                                                                         ` Christoph Hellwig
2019-01-15 13:56                                                                                           ` Christian Zigotzky
2019-01-15 15:17                                                                                             ` Christoph Hellwig
2019-01-17  9:21                                                                                               ` Christian Zigotzky
2019-01-17  9:31                                                                                                 ` Christoph Hellwig
2019-01-17  9:44                                                                                                   ` Christian Zigotzky
2019-01-18  8:35                                                                                                 ` Christoph Hellwig
2019-01-18 11:10                                                                                                   ` Christian Zigotzky
2019-01-18 11:28                                                                                                     ` Christoph Hellwig
2019-01-18 12:07                                                                                                       ` Christian Zigotzky
2019-01-18 12:18                                                                                                         ` Christoph Hellwig
2019-01-18 12:46                                                                                                           ` Christian Zigotzky
2019-01-18 12:55                                                                                                             ` Christoph Hellwig
2019-01-18 15:06                                                                                                               ` Christian Zigotzky
2019-01-19 11:40                                                                                                                 ` Christian Zigotzky
2019-01-19 11:52                                                                                                                   ` Christian Zigotzky
2019-01-19 13:02                                                                                                                     ` Christoph Hellwig
2019-01-19 14:04                                                                                                                       ` Christoph Hellwig
2019-01-21 14:38                                                                                                                         ` Christian Zigotzky
2019-01-23 14:34                                                                                                                           ` Christian Zigotzky
2019-01-25 13:37                                                                                                                             ` Christian Zigotzky
2019-01-27 13:13                                                                                                                               ` Christian Zigotzky
2019-01-28  7:04                                                                                                                                 ` Christoph Hellwig
2019-01-28 16:22                                                                                                                                   ` Christoph Hellwig
2019-01-28 16:52                                                                                                                                     ` Christian Zigotzky
2019-01-29 15:03                                                                                                                                       ` Christian Zigotzky
2019-01-29 16:14                                                                                                                                         ` Christoph Hellwig
2019-01-29 16:34                                                                                                                                           ` Christoph Hellwig
2019-01-30  4:40                                                                                                                                             ` Christian Zigotzky
2019-01-31 12:48                                                                                                                                               ` Christian Zigotzky
2019-02-01  8:04                                                                                                                                                 ` Christoph Hellwig
2019-02-01 16:54                                                                                                                                                   ` Christian Zigotzky
2019-02-03 16:49                                                                                                                                                     ` Christian Zigotzky
2019-02-04  7:56                                                                                                                                                       ` Christoph Hellwig
2019-02-04 12:13                                                                                                                                                         ` Christian Zigotzky
2019-02-04 12:38                                                                                                                                                           ` Christoph Hellwig
2019-02-06 13:45                                                                                                                                                             ` Christian Zigotzky
2019-02-06 15:15                                                                                                                                                               ` Christoph Hellwig
2019-02-06 15:16                                                                                                                                                                 ` Christoph Hellwig
2019-02-07  4:34                                                                                                                                                                   ` Christian Zigotzky
2019-02-08  9:01                                                                                                                                                                     ` Christian Zigotzky
2019-02-08  9:18                                                                                                                                                                       ` Christoph Hellwig
2019-02-08 10:59                                                                                                                                                                         ` Christian Zigotzky
2019-02-10 12:00                                                                                                                                                                         ` Christian Zigotzky
     [not found]                                                                                                                                                                           ` <0042290A-2939-4EBA-A638-D404FA2055ED@xenosoft.de>
2019-02-11  7:21                                                                                                                                                                             ` Christian Zigotzky
2019-02-11  7:38                                                                                                                                                                           ` Christoph Hellwig
2019-02-12 12:42                                                                                                                                                                             ` Christian Zigotzky
2019-02-12 15:25                                                                                                                                                                               ` Christoph Hellwig
2019-02-12 19:31                                                                                                                                                                                 ` Christian Zigotzky
2019-02-12 19:50                                                                                                                                                                                   ` Christian Zigotzky
2019-02-12 19:52                                                                                                                                                                                     ` Christoph Hellwig
2019-11-05  7:56                                                                               ` Bug 205201 - overflow of DMA mask and bus mask Christian Zigotzky
2019-11-05 16:28                                                                                 ` Christoph Hellwig
2019-11-06 14:09                                                                                   ` Robin Murphy
2019-11-21 17:26                                                                                     ` Christoph Hellwig
2019-11-07  9:53                                                                                   ` Christian Zigotzky
2019-11-10  7:27                                                                                     ` Christian Zigotzky
2019-11-11  8:12                                                                                       ` Christian Zigotzky
2019-11-11  8:16                                                                                         ` Christian Zigotzky
2019-11-11 12:22                                                                                           ` Christian Zigotzky
2019-11-12 14:41                                                                                             ` Christoph Hellwig
2019-11-12 22:58                                                                                               ` Christian Zigotzky
2019-11-13 10:14                                                                                               ` Christian Zigotzky
2019-11-13 11:02                                                                                                 ` Christoph Hellwig
2018-11-29 17:02     ` use generic DMA mapping code in powerpc V4 Christoph Hellwig
2018-11-30  3:17   ` Benjamin Herrenschmidt
2018-12-08 17:03 ` Christoph Hellwig
2018-12-16 16:51 ` Christoph Hellwig
2018-12-17  1:14   ` Michael Ellerman

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).