From: Paul Cercueil <paul@crapouillou.net>
To: Thierry Reding <thierry.reding@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paul.burton@mips.com>,
James Hogan <jhogan@kernel.org>, Jonathan Corbet <corbet@lwn.net>
Cc: Mathieu Malaterre <malat@debian.org>,
Ezequiel Garcia <ezequiel@collabora.co.uk>,
PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org,
linux-mips@vger.kernel.org, linux-doc@vger.kernel.org,
linux-clk@vger.kernel.org, od@zcrc.me,
Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v8 02/26] doc: Add doc for the Ingenic TCU hardware
Date: Wed, 12 Dec 2018 23:08:57 +0100 [thread overview]
Message-ID: <20181212220922.18759-3-paul@crapouillou.net> (raw)
In-Reply-To: <20181212220922.18759-1-paul@crapouillou.net>
Add a documentation file about the Timer/Counter Unit (TCU) present in
the Ingenic JZ47xx SoCs.
The Timer/Counter Unit (TCU) in Ingenic JZ47xx SoCs is a multi-function
hardware block. It features up to to eight channels, that can be used as
counters, timers, or PWM.
- JZ4725B, JZ4750, JZ4755 only have six TCU channels. The other SoCs all
have eight channels.
- JZ4725B introduced a separate channel, called Operating System Timer
(OST). It is a 32-bit programmable timer. On JZ4770 and above, it is
64-bit.
- Each one of the TCU channels has its own clock, which can be reparented
to three different clocks (pclk, ext, rtc), gated, and reclocked, through
their TCSR register.
* The watchdog and OST hardware blocks also feature a TCSR register with
the same format in their register space.
* The TCU registers used to gate/ungate can also gate/ungate the watchdog
and OST clocks.
- Each TCU channel works in one of two modes:
* mode TCU1: channels cannot work in sleep mode, but are easier to
operate.
* mode TCU2: channels can work in sleep mode, but the operation is a bit
more complicated than with TCU1 channels.
- The mode of each TCU channel depends on the SoC used:
* On the oldest SoCs (up to JZ4740), all of the eight channels operate in
TCU1 mode.
* On JZ4725B, channel 5 operates as TCU2, the others operate as TCU1.
* On newest SoCs (JZ4750 and above), channels 1-2 operate as TCU2, the
others operate as TCU1.
- Each channel can generate an interrupt. Some channels share an interrupt
line, some don't, and this changes between SoC versions:
* on older SoCs (JZ4740 and below), channel 0 and channel 1 have their
own interrupt line; channels 2-7 share the last interrupt line.
* On JZ4725B, channel 0 has its own interrupt; channels 1-5 share one
interrupt line; the OST uses the last interrupt line.
* on newer SoCs (JZ4750 and above), channel 5 has its own interrupt;
channels 0-4 and (if eight channels) 6-7 all share one interrupt line;
the OST uses the last interrupt line.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
Notes:
v4: New patch in this series
v5: Added information about number of channels, and improved
documentation about channel modes
v6: Add info about OST (can be 32-bit on older SoCs)
v7: No change
v8: No change
Documentation/mips/ingenic-tcu.txt | 60 ++++++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/mips/ingenic-tcu.txt
diff --git a/Documentation/mips/ingenic-tcu.txt b/Documentation/mips/ingenic-tcu.txt
new file mode 100644
index 000000000000..0ea35b2a46da
--- /dev/null
+++ b/Documentation/mips/ingenic-tcu.txt
@@ -0,0 +1,60 @@
+Ingenic JZ47xx SoCs Timer/Counter Unit hardware
+-----------------------------------------------
+
+The Timer/Counter Unit (TCU) in Ingenic JZ47xx SoCs is a multi-function
+hardware block. It features up to to eight channels, that can be used as
+counters, timers, or PWM.
+
+- JZ4725B, JZ4750, JZ4755 only have six TCU channels. The other SoCs all
+ have eight channels.
+
+- JZ4725B introduced a separate channel, called Operating System Timer
+ (OST). It is a 32-bit programmable timer. On JZ4770 and above, it is
+ 64-bit.
+
+- Each one of the TCU channels has its own clock, which can be reparented
+ to three different clocks (pclk, ext, rtc), gated, and reclocked, through
+ their TCSR register.
+ * The watchdog and OST hardware blocks also feature a TCSR register with
+ the same format in their register space.
+ * The TCU registers used to gate/ungate can also gate/ungate the watchdog
+ and OST clocks.
+
+- Each TCU channel works in one of two modes:
+ * mode TCU1: channels cannot work in sleep mode, but are easier to
+ operate.
+ * mode TCU2: channels can work in sleep mode, but the operation is a bit
+ more complicated than with TCU1 channels.
+
+- The mode of each TCU channel depends on the SoC used:
+ * On the oldest SoCs (up to JZ4740), all of the eight channels operate in
+ TCU1 mode.
+ * On JZ4725B, channel 5 operates as TCU2, the others operate as TCU1.
+ * On newest SoCs (JZ4750 and above), channels 1-2 operate as TCU2, the
+ others operate as TCU1.
+
+- Each channel can generate an interrupt. Some channels share an interrupt
+ line, some don't, and this changes between SoC versions:
+ * on older SoCs (JZ4740 and below), channel 0 and channel 1 have their
+ own interrupt line; channels 2-7 share the last interrupt line.
+ * On JZ4725B, channel 0 has its own interrupt; channels 1-5 share one
+ interrupt line; the OST uses the last interrupt line.
+ * on newer SoCs (JZ4750 and above), channel 5 has its own interrupt;
+ channels 0-4 and (if eight channels) 6-7 all share one interrupt line;
+ the OST uses the last interrupt line.
+
+Implementation
+--------------
+
+The functionalities of the TCU hardware are spread across multiple drivers:
+- clocks/irq/timer: drivers/clocksource/ingenic-timer.c
+- PWM: drivers/pwm/pwm-jz4740.c
+- watchdog: drivers/watchdog/jz4740_wdt.c
+- OST: drivers/clocksource/ingenic-ost.c
+
+Because various functionalities of the TCU that belong to different drivers
+and frameworks can be controlled from the same registers, all of these
+drivers access their registers through the same regmap.
+
+For more information regarding the devicetree bindings of the TCU drivers,
+have a look at Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
--
2.11.0
next prev parent reply other threads:[~2018-12-12 22:16 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-12 22:08 [PATCH v8 00/26] Ingenic TCU patchset v8 Paul Cercueil
2018-12-12 22:08 ` [PATCH v8 01/26] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2018-12-17 23:18 ` Stephen Boyd
2018-12-12 22:08 ` Paul Cercueil [this message]
2018-12-12 22:08 ` [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
2018-12-17 21:05 ` Rob Herring
2018-12-17 22:03 ` Paul Cercueil
2018-12-18 16:36 ` Rob Herring
2018-12-22 11:09 ` Paul Cercueil
2018-12-12 22:08 ` [PATCH v8 04/26] clocksource: Add a new timer-ingenic driver Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST Paul Cercueil
2019-01-23 12:58 ` Mathieu Malaterre
2019-01-23 14:31 ` Guenter Roeck
2019-01-23 17:25 ` Paul Cercueil
2019-01-23 18:01 ` Guenter Roeck
2019-01-24 19:28 ` Stephen Boyd
2019-01-24 20:46 ` Paul Cercueil
2019-01-24 22:46 ` Stephen Boyd
2019-01-24 22:53 ` Paul Cercueil
2019-02-23 3:17 ` Paul Cercueil
2019-02-25 18:05 ` Stephen Boyd
2019-02-27 23:54 ` Paul Cercueil
2019-01-23 17:27 ` Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 06/26] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 07/26] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 08/26] watchdog: jz4740: Use regmap " Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 09/26] watchdog: jz4740: Avoid starting watchdog in set_timeout Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 10/26] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 11/26] pwm: jz4740: Use regmap and clocks from TCU driver Paul Cercueil
2018-12-13 9:30 ` Uwe Kleine-König
2018-12-13 14:34 ` Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1 Paul Cercueil
2018-12-13 9:18 ` Uwe Kleine-König
2018-12-13 13:58 ` Paul Cercueil
2018-12-13 20:32 ` Uwe Kleine-König
2018-12-16 13:36 ` Paul Cercueil
2018-12-17 7:43 ` Uwe Kleine-König
2018-12-12 22:09 ` [PATCH v8 13/26] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 14/26] pwm: jz4740: Remove unused devicetree compatible strings Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B Paul Cercueil
2018-12-13 9:24 ` Uwe Kleine-König
2018-12-13 14:03 ` Paul Cercueil
2018-12-13 16:18 ` Thierry Reding
2018-12-13 20:42 ` Uwe Kleine-König
2018-12-14 13:50 ` Linus Walleij
2018-12-14 14:26 ` Uwe Kleine-König
2018-12-14 14:56 ` Linus Walleij
2018-12-16 14:18 ` Paul Cercueil
2018-12-17 7:53 ` Uwe Kleine-König
2018-12-20 17:39 ` Thierry Reding
2018-12-20 20:58 ` Uwe Kleine-König
2018-12-12 22:09 ` [PATCH v8 16/26] clk: jz4740: Add TCU clock Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 17/26] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 18/26] MIPS: jz4740: Add DTS nodes for the TCU drivers Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 19/26] MIPS: qi_lb60: Move PWM devices to devicetree Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 20/26] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2018-12-12 22:12 ` [PATCH v8 21/26] MIPS: CI20: Reduce system timer and clocksource to 3 MHz Paul Cercueil
2018-12-12 22:12 ` [PATCH v8 22/26] MIPS: CI20: defconfig: enable OST driver Paul Cercueil
2018-12-12 22:13 ` [PATCH v8 23/26] MIPS: GCW0: Move clocksource to TCU channel 2 Paul Cercueil
2018-12-12 22:13 ` [PATCH v8 24/26] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2018-12-12 22:14 ` [PATCH v8 25/26] MIPS: GCW0: defconfig: Enable OST, watchdog, PWM drivers Paul Cercueil
2018-12-12 22:15 ` [PATCH v8 26/26] MIPS: jz4740: Drop obsolete code Paul Cercueil
2019-01-24 21:26 ` [PATCH v8 00/26] Ingenic TCU patchset v8 Mathieu Malaterre
2019-01-24 21:41 ` Paul Cercueil
2019-01-25 8:21 ` Mathieu Malaterre
2019-01-25 17:04 ` Paul Cercueil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181212220922.18759-3-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=corbet@lwn.net \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel@collabora.co.uk \
--cc=jhogan@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=malat@debian.org \
--cc=mark.rutland@arm.com \
--cc=od@zcrc.me \
--cc=paul.burton@mips.com \
--cc=prasannatsmkumar@gmail.com \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).