[PATCH v10 1/6] ACPI: Allow CONFIG_PCI to be unset for reboot

[PATCH v10 1/6] ACPI: Allow CONFIG_PCI to be unset for reboot

[Sinan Kaya]

Make PCI reboot conditional on PCI support being present on the kernel
configuration.

Signed-off-by: Sinan Kaya <okaya@kernel.org>
---
 drivers/acpi/reboot.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
index 6fa9c2a4cfe9..d75e637ee36a 100644
--- a/drivers/acpi/reboot.c
+++ b/drivers/acpi/reboot.c
@@ -7,8 +7,6 @@
 void acpi_reboot(void)
 {
 	struct acpi_generic_address *rr;
-	struct pci_bus *bus0;
-	unsigned int devfn;
 	u8 reset_value;
 
 	if (acpi_disabled)
@@ -33,6 +31,11 @@ void acpi_reboot(void)
 	 * on a device on bus 0. */
 	switch (rr->space_id) {
 	case ACPI_ADR_SPACE_PCI_CONFIG:
+	{
+#ifdef CONFIG_PCI
+		unsigned int devfn;
+		struct pci_bus *bus0;
+
 		/* The reset register can only live on bus 0. */
 		bus0 = pci_find_bus(0, 0);
 		if (!bus0)
@@ -44,8 +47,9 @@ void acpi_reboot(void)
 		/* Write the value that resets us. */
 		pci_bus_write_config_byte(bus0, devfn,
 				(rr->address & 0xffff), reset_value);
+#endif
 		break;
-
+	}
 	case ACPI_ADR_SPACE_SYSTEM_MEMORY:
 	case ACPI_ADR_SPACE_SYSTEM_IO:
 		printk(KERN_DEBUG "ACPI MEMORY or I/O RESET_REG.\n");
-- 
2.19.0

[PATCH v10 2/6] ACPI / OSL: Stub out acpi_os_(read/write)_pci_configurations()

[Sinan Kaya]

Getting ready to allow CONFIG_PCI to be unset with ACPI enabled. Stub out
acpi_os_read_pci_configuration and acpi_os_write_pci_configuration
functions when CONFIG_PCI is not defined.

Signed-off-by: Sinan Kaya <okaya@kernel.org>
---
 drivers/acpi/osl.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index b48874b8e1ea..524fd5f33ea4 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -773,6 +773,7 @@ acpi_status
 acpi_os_read_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
 			       u64 *value, u32 width)
 {
+#ifdef CONFIG_PCI
 	int result, size;
 	u32 value32;
 
@@ -799,12 +800,19 @@ acpi_os_read_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
 	*value = value32;
 
 	return (result ? AE_ERROR : AE_OK);
+#else
+	int rc;
+
+	rc = pr_warn_once("PCI configuration space access is not supported\n");
+	return rc ? AE_SUPPORT : AE_OK;
+#endif
 }
 
 acpi_status
 acpi_os_write_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
 				u64 value, u32 width)
 {
+#ifdef CONFIG_PCI
 	int result, size;
 
 	switch (width) {
@@ -826,6 +834,12 @@ acpi_os_write_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
 				reg, size, value);
 
 	return (result ? AE_ERROR : AE_OK);
+#else
+	int rc;
+
+	rc = pr_warn_once("PCI configuration space access is not supported\n");
+	return rc ? AE_SUPPORT : AE_OK;
+#endif
 }
 
 static void acpi_os_execute_deferred(struct work_struct *work)
-- 
2.19.0

[PATCH v10 3/6] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set

[Sinan Kaya]

We are compiling PCI code today for systems with ACPI and no PCI
device present. Remove the useless code and reduce the tight
dependency.

Signed-off-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts
---
 arch/x86/include/asm/pci_x86.h | 7 +++++++
 drivers/acpi/Kconfig           | 1 -
 drivers/acpi/Makefile          | 2 +-
 drivers/acpi/internal.h        | 5 +++++
 drivers/pci/Makefile           | 2 +-
 include/acpi/acpi_drivers.h    | 7 +++++++
 include/linux/acpi.h           | 7 +++++++
 include/linux/pci.h            | 4 ++++
 8 files changed, 32 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index 959d618dbb17..73bb404f4d2a 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -121,7 +121,14 @@ extern void __init dmi_check_pciprobe(void);
 extern void __init dmi_check_skip_isa_align(void);
 
 /* some common used subsys_initcalls */
+#ifdef CONFIG_PCI
 extern int __init pci_acpi_init(void);
+#else
+static inline int  __init pci_acpi_init(void)
+{
+	return -EINVAL;
+}
+#endif
 extern void __init pcibios_irq_init(void);
 extern int __init pcibios_init(void);
 extern int pci_legacy_init(void);
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 7cea769c37df..a0abcb3bd673 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -9,7 +9,6 @@ config ARCH_SUPPORTS_ACPI
 menuconfig ACPI
 	bool "ACPI (Advanced Configuration and Power Interface) Support"
 	depends on ARCH_SUPPORTS_ACPI
-	depends on PCI
 	select PNP
 	default y if X86
 	help
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index edc039313cd6..7c6afc111d76 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -39,7 +39,7 @@ acpi-y				+= processor_core.o
 acpi-$(CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC) += processor_pdc.o
 acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
-acpi-y				+= pci_root.o pci_link.o pci_irq.o
+acpi-$(CONFIG_PCI)		+= pci_root.o pci_link.o pci_irq.o
 obj-$(CONFIG_ACPI_MCFG)		+= pci_mcfg.o
 acpi-y				+= acpi_lpss.o acpi_apd.o
 acpi-y				+= acpi_platform.o
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 530a3f675490..b7060dae2789 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -25,8 +25,13 @@ int acpi_osi_init(void);
 acpi_status acpi_os_initialize1(void);
 void init_acpi_device_notify(void);
 int acpi_scan_init(void);
+#ifdef CONFIG_PCI
 void acpi_pci_root_init(void);
 void acpi_pci_link_init(void);
+#else
+static inline void acpi_pci_root_init(void) {}
+static inline void acpi_pci_link_init(void) {}
+#endif
 void acpi_processor_init(void);
 void acpi_platform_init(void);
 void acpi_pnp_init(void);
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index f2bda77a2df1..657d642fcc67 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -11,6 +11,7 @@ ifdef CONFIG_PCI
 obj-$(CONFIG_PROC_FS)		+= proc.o
 obj-$(CONFIG_SYSFS)		+= slot.o
 obj-$(CONFIG_OF)		+= of.o
+obj-$(CONFIG_ACPI)		+= pci-acpi.o
 endif
 
 obj-$(CONFIG_PCI_QUIRKS)	+= quirks.o
@@ -20,7 +21,6 @@ obj-$(CONFIG_PCI_MSI)		+= msi.o
 obj-$(CONFIG_PCI_ATS)		+= ats.o
 obj-$(CONFIG_PCI_IOV)		+= iov.o
 obj-$(CONFIG_PCI_BRIDGE_EMUL)	+= pci-bridge-emul.o
-obj-$(CONFIG_ACPI)		+= pci-acpi.o
 obj-$(CONFIG_PCI_LABEL)		+= pci-label.o
 obj-$(CONFIG_X86_INTEL_MID)	+= pci-mid.o
 obj-$(CONFIG_PCI_SYSCALL)	+= syscall.o
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index 14499757338f..de1804aeaf69 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -88,7 +88,14 @@ int acpi_pci_link_free_irq(acpi_handle handle);
 
 struct pci_bus;
 
+#ifdef CONFIG_PCI
 struct pci_dev *acpi_get_pci_dev(acpi_handle);
+#else
+static inline struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
+{
+	return NULL;
+}
+#endif
 
 /* Arch-defined function to add a bus to the system */
 
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index ed80f147bd50..eb1fdf4c196a 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -340,7 +340,14 @@ struct pci_dev;
 int acpi_pci_irq_enable (struct pci_dev *dev);
 void acpi_penalize_isa_irq(int irq, int active);
 bool acpi_isa_irq_available(int irq);
+#ifdef CONFIG_PCI
 void acpi_penalize_sci_irq(int irq, int trigger, int polarity);
+#else
+static inline void acpi_penalize_sci_irq(int irq, int trigger,
+					int polarity)
+{
+}
+#endif
 void acpi_pci_irq_disable (struct pci_dev *dev);
 
 extern int ec_read(u8 addr, u8 *val);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 11c71c4ecf75..51a5a5217667 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1960,7 +1960,11 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev,
 				 enum pcie_reset_state state);
 int pcibios_add_device(struct pci_dev *dev);
 void pcibios_release_device(struct pci_dev *dev);
+#ifdef CONFIG_PCI
 void pcibios_penalize_isa_irq(int irq, int active);
+#else
+static inline void pcibios_penalize_isa_irq(int irq, int active) {}
+#endif
 int pcibios_alloc_irq(struct pci_dev *dev);
 void pcibios_free_irq(struct pci_dev *dev);
 resource_size_t pcibios_default_alignment(void);
-- 
2.19.0

[PATCH v10 4/6] ACPICA: Remove PCI bits from ACPICA when CONFIG_PCI is unset

[Sinan Kaya]

Now that we allow CONFIG_PCI to be unset, remove useless code from ACPICA
too.

Signed-off-by: Sinan Kaya <okaya@kernel.org>
---
 drivers/acpi/acpica/Makefile    | 2 +-
 drivers/acpi/acpica/achware.h   | 9 +++++++++
 include/acpi/platform/aclinux.h | 4 ++++
 3 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index b14621da5413..59700433a96e 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -77,13 +77,13 @@ acpi-y +=		\
 	hwacpi.o	\
 	hwesleep.o	\
 	hwgpe.o		\
-	hwpci.o		\
 	hwregs.o	\
 	hwsleep.o	\
 	hwvalid.o	\
 	hwxface.o	\
 	hwxfsleep.o
 
+acpi-$(CONFIG_PCI) += hwpci.o
 acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o
 
 acpi-y +=		\
diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index 43ce67a9da1f..ef99e2fc37f8 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -106,11 +106,20 @@ acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 				 struct acpi_gpe_block_info *gpe_block,
 				 void *context);
 
+#ifdef ACPI_PCI_CONFIGURED
 /*
  * hwpci - PCI configuration support
  */
 acpi_status
 acpi_hw_derive_pci_id(struct acpi_pci_id *pci_id,
 		      acpi_handle root_pci_device, acpi_handle pci_region);
+#else
+static inline acpi_status
+acpi_hw_derive_pci_id(struct acpi_pci_id *pci_id, acpi_handle root_pci_device,
+		      acpi_handle pci_region)
+{
+	return AE_SUPPORT;
+}
+#endif
 
 #endif				/* __ACHWARE_H__ */
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index 7451b3bca83a..e3d21d014fcc 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -33,6 +33,10 @@
 
 /* Kernel specific ACPICA configuration */
 
+#ifdef CONFIG_PCI
+#define ACPI_PCI_CONFIGURED
+#endif
+
 #ifdef CONFIG_ACPI_REDUCED_HARDWARE_ONLY
 #define ACPI_REDUCED_HARDWARE 1
 #endif
-- 
2.19.0

[PATCH v10 5/6] arm64: select ACPI PCI code only both features are enabled

[Sinan Kaya]

ACPI and PCI are no longer coupled to each other. Specify requirements
for both when pulling in code.

Signed-off-by: Sinan Kaya <okaya@kernel.org>
---
 arch/arm64/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index ea2ab0330e3a..bcb6262044d8 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -5,7 +5,7 @@ config ARM64
 	select ACPI_GTDT if ACPI
 	select ACPI_IORT if ACPI
 	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
-	select ACPI_MCFG if ACPI
+	select ACPI_MCFG if (ACPI && PCI)
 	select ACPI_SPCR_TABLE if ACPI
 	select ACPI_PPTT if ACPI
 	select ARCH_CLOCKSOURCE_DATA
@@ -163,7 +163,7 @@ config ARM64
 	select OF
 	select OF_EARLY_FLATTREE
 	select OF_RESERVED_MEM
-	select PCI_ECAM if ACPI
+	select PCI_ECAM if (ACPI && PCI)
 	select POWER_RESET
 	select POWER_SUPPLY
 	select REFCOUNT_FULL
-- 
2.19.0

[PATCH v10 6/6] ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set

[Sinan Kaya]

Remove PCI dependent code out of iort.c when CONFIG_PCI is not defined.

Signed-off-by: Sinan Kaya <okaya@kernel.org>
---
 drivers/acpi/arm64/iort.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 70f4e80b9246..d0f68607efe6 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -1437,6 +1437,7 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
 
 static bool __init iort_enable_acs(struct acpi_iort_node *iort_node)
 {
+#ifdef CONFIG_PCI
 	if (iort_node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
 		struct acpi_iort_node *parent;
 		struct acpi_iort_id_mapping *map;
@@ -1462,6 +1463,7 @@ static bool __init iort_enable_acs(struct acpi_iort_node *iort_node)
 			}
 		}
 	}
+#endif
 
 	return false;
 }
-- 
2.19.0

Re: [PATCH v10 5/6] arm64: select ACPI PCI code only both features are enabled

[Rafael J. Wysocki]

On Saturday, December 15, 2018 2:02:46 AM CET Sinan Kaya wrote:
> ACPI and PCI are no longer coupled to each other. Specify requirements
> for both when pulling in code.
> 
> Signed-off-by: Sinan Kaya <okaya@kernel.org>
> ---
>  arch/arm64/Kconfig | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index ea2ab0330e3a..bcb6262044d8 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -5,7 +5,7 @@ config ARM64
>  	select ACPI_GTDT if ACPI
>  	select ACPI_IORT if ACPI
>  	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
> -	select ACPI_MCFG if ACPI
> +	select ACPI_MCFG if (ACPI && PCI)
>  	select ACPI_SPCR_TABLE if ACPI
>  	select ACPI_PPTT if ACPI
>  	select ARCH_CLOCKSOURCE_DATA
> @@ -163,7 +163,7 @@ config ARM64
>  	select OF
>  	select OF_EARLY_FLATTREE
>  	select OF_RESERVED_MEM
> -	select PCI_ECAM if ACPI
> +	select PCI_ECAM if (ACPI && PCI)
>  	select POWER_RESET
>  	select POWER_SUPPLY
>  	select REFCOUNT_FULL
> 

I need a maintainer ACK here.

Re: [PATCH v10 6/6] ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set

[Rafael J. Wysocki]

On Saturday, December 15, 2018 2:02:47 AM CET Sinan Kaya wrote:
> Remove PCI dependent code out of iort.c when CONFIG_PCI is not defined.
> 
> Signed-off-by: Sinan Kaya <okaya@kernel.org>
> ---
>  drivers/acpi/arm64/iort.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> index 70f4e80b9246..d0f68607efe6 100644
> --- a/drivers/acpi/arm64/iort.c
> +++ b/drivers/acpi/arm64/iort.c
> @@ -1437,6 +1437,7 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
>  
>  static bool __init iort_enable_acs(struct acpi_iort_node *iort_node)
>  {
> +#ifdef CONFIG_PCI
>  	if (iort_node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
>  		struct acpi_iort_node *parent;
>  		struct acpi_iort_id_mapping *map;
> @@ -1462,6 +1463,7 @@ static bool __init iort_enable_acs(struct acpi_iort_node *iort_node)
>  			}
>  		}
>  	}
> +#endif
>  
>  	return false;
>  }
> 

I need a maintainer ACK here.

Re: [PATCH v10 6/6] ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set

[Lorenzo Pieralisi]

On Sat, Dec 15, 2018 at 01:02:47AM +0000, Sinan Kaya wrote:
> Remove PCI dependent code out of iort.c when CONFIG_PCI is not defined.
> 
> Signed-off-by: Sinan Kaya <okaya@kernel.org>
> ---
>  drivers/acpi/arm64/iort.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> index 70f4e80b9246..d0f68607efe6 100644
> --- a/drivers/acpi/arm64/iort.c
> +++ b/drivers/acpi/arm64/iort.c
> @@ -1437,6 +1437,7 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
>  
>  static bool __init iort_enable_acs(struct acpi_iort_node *iort_node)
>  {
> +#ifdef CONFIG_PCI
>  	if (iort_node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
>  		struct acpi_iort_node *parent;
>  		struct acpi_iort_id_mapping *map;
> @@ -1462,6 +1463,7 @@ static bool __init iort_enable_acs(struct acpi_iort_node *iort_node)
>  			}
>  		}
>  	}
> +#endif
>  
>  	return false;
>  }
> -- 
> 2.19.0

I would prefer the ifdef to wrap the function rather than in the
function.

Anyway, as an alternative, what about this:

-- >8 --
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 70f4e80b9246..06d4cc888df6 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -1435,8 +1435,14 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
 	return ret;
 }
 
-static bool __init iort_enable_acs(struct acpi_iort_node *iort_node)
+#ifdef CONFIG_PCI
+static void __init iort_enable_acs(struct acpi_iort_node *iort_node)
 {
+	static bool acs_enabled __initdata = false;
+
+	if (acs_enabled)
+		return;
+
 	if (iort_node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
 		struct acpi_iort_node *parent;
 		struct acpi_iort_id_mapping *map;
@@ -1458,13 +1464,15 @@ static bool __init iort_enable_acs(struct acpi_iort_node *iort_node)
 			if ((parent->type == ACPI_IORT_NODE_SMMU) ||
 				(parent->type == ACPI_IORT_NODE_SMMU_V3)) {
 				pci_request_acs();
-				return true;
+				acs_enabled = true;
+				return;
 			}
 		}
 	}
-
-	return false;
 }
+#else
+static inline void iort_enable_acs(struct acpi_iort_node *iort_node) { }
+#endif
 
 static void __init iort_init_platform_devices(void)
 {
@@ -1472,7 +1480,6 @@ static void __init iort_init_platform_devices(void)
 	struct acpi_table_iort *iort;
 	struct fwnode_handle *fwnode;
 	int i, ret;
-	bool acs_enabled = false;
 	const struct iort_dev_config *ops;
 
 	/*
@@ -1493,8 +1500,7 @@ static void __init iort_init_platform_devices(void)
 			return;
 		}
 
-		if (!acs_enabled)
-			acs_enabled = iort_enable_acs(iort_node);
+		iort_enable_acs(iort_node);
 
 		ops = iort_get_dev_cfg(iort_node);
 		if (ops) {

Re: [PATCH v10 5/6] arm64: select ACPI PCI code only both features are enabled

[Catalin Marinas]

On Mon, Dec 17, 2018 at 11:04:42AM +0100, Rafael J. Wysocki wrote:
> On Saturday, December 15, 2018 2:02:46 AM CET Sinan Kaya wrote:
> > ACPI and PCI are no longer coupled to each other. Specify requirements
> > for both when pulling in code.
> > 
> > Signed-off-by: Sinan Kaya <okaya@kernel.org>
> > ---
> >  arch/arm64/Kconfig | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> > index ea2ab0330e3a..bcb6262044d8 100644
> > --- a/arch/arm64/Kconfig
> > +++ b/arch/arm64/Kconfig
> > @@ -5,7 +5,7 @@ config ARM64
> >  	select ACPI_GTDT if ACPI
> >  	select ACPI_IORT if ACPI
> >  	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
> > -	select ACPI_MCFG if ACPI
> > +	select ACPI_MCFG if (ACPI && PCI)
> >  	select ACPI_SPCR_TABLE if ACPI
> >  	select ACPI_PPTT if ACPI
> >  	select ARCH_CLOCKSOURCE_DATA
> > @@ -163,7 +163,7 @@ config ARM64
> >  	select OF
> >  	select OF_EARLY_FLATTREE
> >  	select OF_RESERVED_MEM
> > -	select PCI_ECAM if ACPI
> > +	select PCI_ECAM if (ACPI && PCI)
> >  	select POWER_RESET
> >  	select POWER_SUPPLY
> >  	select REFCOUNT_FULL
> > 
> 
> I need a maintainer ACK here.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>

Re: [PATCH v10 3/6] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set

[Ingo Molnar]

* Sinan Kaya <okaya@kernel.org> wrote:

> We are compiling PCI code today for systems with ACPI and no PCI
> device present. Remove the useless code and reduce the tight
> dependency.
> 
> Signed-off-by: Sinan Kaya <okaya@kernel.org>
> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts

If this is targeted for the ACPI tree:

Acked-by: Ingo Molnar <mingo@kernel.org>

Thanks,

	Ingo

Re: [PATCH v10 3/6] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set

[Sinan Kaya]

On Mon, Dec 17, 2018 at 6:01 PM Ingo Molnar <mingo@kernel.org> wrote:
&gt;
&gt;
&gt; * Sinan Kaya <okaya@kernel.org> wrote:
&gt;
&gt; &gt; We are compiling PCI code today for systems with ACPI and no PCI
&gt; &gt; device present. Remove the useless code and reduce the tight
&gt; &gt; dependency.
&gt; &gt;
&gt; &gt; Signed-off-by: Sinan Kaya <okaya@kernel.org>
&gt; &gt; Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts
&gt;
&gt; If this is targeted for the ACPI tree:
&gt;

Thanks, yes. Plan is to take it through ACPI tree.

> Acked-by: Ingo Molnar <mingo@kernel.org>
>
> Thanks,
>
>         Ingo

Re: [PATCH v10 6/6] ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set

[Hanjun Guo]

Hi Sinan,

On 2018/12/15 9:02, Sinan Kaya wrote:
> Remove PCI dependent code out of iort.c when CONFIG_PCI is not defined.
> 
> Signed-off-by: Sinan Kaya <okaya@kernel.org>
> ---
>  drivers/acpi/arm64/iort.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> index 70f4e80b9246..d0f68607efe6 100644
> --- a/drivers/acpi/arm64/iort.c
> +++ b/drivers/acpi/arm64/iort.c
> @@ -1437,6 +1437,7 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
>  
>  static bool __init iort_enable_acs(struct acpi_iort_node *iort_node)
>  {
> +#ifdef CONFIG_PCI
>  	if (iort_node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
>  		struct acpi_iort_node *parent;
>  		struct acpi_iort_id_mapping *map;
> @@ -1462,6 +1463,7 @@ static bool __init iort_enable_acs(struct acpi_iort_node *iort_node)
>  			}
>  		}
>  	}
> +#endif

I prefer stub function for iort_enable_acs(), not adding #ifdef/#endif pair inside
this function.

By the way, there are other pci function called in iort.c, could you explain a
little bit why no need to update other function calls in commit message?

Thanks
Hanjun

Re: [PATCH v10 6/6] ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set

[Sinan Kaya]

On 12/18/2018 3:14 AM, Hanjun Guo wrote:
> I prefer stub function for iort_enable_acs(), not adding #ifdef/#endif pair inside
> this function.

Yes, I'm reworking this per input from Lorenzo.

> 
> By the way, there are other pci function called in iort.c, could you explain a
> little bit why no need to update other function calls in commit message?

I added few words about why other code was not stubbed out.