From: Alexander Shiyan <shc_work@mail.ru> To: linux-kernel@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org>, Thomas Gleixner <tglx@linutronix.de>, Arnd Bergmann <arnd@arndb.de>, Alexander Shiyan <shc_work@mail.ru> Subject: [PATCH] clocksource: clps711x: Remove board support Date: Thu, 20 Dec 2018 14:16:26 +0300 Message-ID: <20181220111626.17140-1-shc_work@mail.ru> (raw) Since board support for the CLPS711X platform was removed, remove the board support from the clps711x-timer driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> --- drivers/clocksource/clps711x-timer.c | 44 +++++++++++------------------------- 1 file changed, 13 insertions(+), 31 deletions(-) diff --git a/drivers/clocksource/clps711x-timer.c b/drivers/clocksource/clps711x-timer.c index a8dd80576c95..857f8c086274 100644 --- a/drivers/clocksource/clps711x-timer.c +++ b/drivers/clocksource/clps711x-timer.c @@ -31,16 +31,9 @@ static u64 notrace clps711x_sched_clock_read(void) return ~readw(tcd); } -static int __init _clps711x_clksrc_init(struct clk *clock, void __iomem *base) +static void __init clps711x_clksrc_init(struct clk *clock, void __iomem *base) { - unsigned long rate; - - if (!base) - return -ENOMEM; - if (IS_ERR(clock)) - return PTR_ERR(clock); - - rate = clk_get_rate(clock); + unsigned long rate = clk_get_rate(clock); tcd = base; @@ -48,8 +41,6 @@ static int __init _clps711x_clksrc_init(struct clk *clock, void __iomem *base) clocksource_mmio_readw_down); sched_clock_register(clps711x_sched_clock_read, 16, rate); - - return 0; } static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id) @@ -67,13 +58,6 @@ static int __init _clps711x_clkevt_init(struct clk *clock, void __iomem *base, struct clock_event_device *clkevt; unsigned long rate; - if (!irq) - return -EINVAL; - if (!base) - return -ENOMEM; - if (IS_ERR(clock)) - return PTR_ERR(clock); - clkevt = kzalloc(sizeof(*clkevt), GFP_KERNEL); if (!clkevt) return -ENOMEM; @@ -93,31 +77,29 @@ static int __init _clps711x_clkevt_init(struct clk *clock, void __iomem *base, "clps711x-timer", clkevt); } -void __init clps711x_clksrc_init(void __iomem *tc1_base, void __iomem *tc2_base, - unsigned int irq) -{ - struct clk *tc1 = clk_get_sys("clps711x-timer.0", NULL); - struct clk *tc2 = clk_get_sys("clps711x-timer.1", NULL); - - BUG_ON(_clps711x_clksrc_init(tc1, tc1_base)); - BUG_ON(_clps711x_clkevt_init(tc2, tc2_base, irq)); -} - -#ifdef CONFIG_TIMER_OF static int __init clps711x_timer_init(struct device_node *np) { unsigned int irq = irq_of_parse_and_map(np, 0); struct clk *clock = of_clk_get(np, 0); void __iomem *base = of_iomap(np, 0); + if (!base) + return -ENOMEM; + if (!irq) + return -EINVAL; + if (IS_ERR(clock)) + return PTR_ERR(clock); + switch (of_alias_get_id(np, "timer")) { case CLPS711X_CLKSRC_CLOCKSOURCE: - return _clps711x_clksrc_init(clock, base); + clps711x_clksrc_init(clock, base); + break; case CLPS711X_CLKSRC_CLOCKEVENT: return _clps711x_clkevt_init(clock, base, irq); default: return -EINVAL; } + + return 0; } TIMER_OF_DECLARE(clps711x, "cirrus,ep7209-timer", clps711x_timer_init); -#endif -- 2.13.0
next reply index Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-12-20 11:16 Alexander Shiyan [this message] 2018-12-20 16:22 ` Arnd Bergmann 2019-03-24 10:34 ` [tip:timers/urgent] clocksource/drivers/clps711x: " tip-bot for Alexander Shiyan
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181220111626.17140-1-shc_work@mail.ru \ --to=shc_work@mail.ru \ --cc=arnd@arndb.de \ --cc=daniel.lezcano@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=tglx@linutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
LKML Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \ linux-kernel@vger.kernel.org public-inbox-index lkml Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel AGPL code for this site: git clone https://public-inbox.org/public-inbox.git