linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org,
	"Russell Senior" <russell@personaltelco.net>,
	"Rafał Miłecki" <zajec5@gmail.com>,
	"Rafał Miłecki" <rafal@milecki.pl>,
	"Richard Weinberger" <richard@nod.at>
Subject: [PATCH 4.19 11/46] ubifs: Handle re-linking of inodes correctly while recovery
Date: Fri, 28 Dec 2018 12:52:05 +0100	[thread overview]
Message-ID: <20181228113125.452002715@linuxfoundation.org> (raw)
In-Reply-To: <20181228113124.971620049@linuxfoundation.org>

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Weinberger <richard@nod.at>

commit e58725d51fa8da9133f3f1c54170aa2e43056b91 upstream.

UBIFS's recovery code strictly assumes that a deleted inode will never
come back, therefore it removes all data which belongs to that inode
as soon it faces an inode with link count 0 in the replay list.
Before O_TMPFILE this assumption was perfectly fine. With O_TMPFILE
it can lead to data loss upon a power-cut.

Consider a journal with entries like:
0: inode X (nlink = 0) /* O_TMPFILE was created */
1: data for inode X /* Someone writes to the temp file */
2: inode X (nlink = 0) /* inode was changed, xattr, chmod, … */
3: inode X (nlink = 1) /* inode was re-linked via linkat() */

Upon replay of entry #2 UBIFS will drop all data that belongs to inode X,
this will lead to an empty file after mounting.

As solution for this problem, scan the replay list for a re-link entry
before dropping data.

Fixes: 474b93704f32 ("ubifs: Implement O_TMPFILE")
Cc: stable@vger.kernel.org
Cc: Russell Senior <russell@personaltelco.net>
Cc: Rafał Miłecki <zajec5@gmail.com>
Reported-by: Russell Senior <russell@personaltelco.net>
Reported-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ubifs/replay.c |   37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -210,6 +210,38 @@ static int trun_remove_range(struct ubif
 }
 
 /**
+ * inode_still_linked - check whether inode in question will be re-linked.
+ * @c: UBIFS file-system description object
+ * @rino: replay entry to test
+ *
+ * O_TMPFILE files can be re-linked, this means link count goes from 0 to 1.
+ * This case needs special care, otherwise all references to the inode will
+ * be removed upon the first replay entry of an inode with link count 0
+ * is found.
+ */
+static bool inode_still_linked(struct ubifs_info *c, struct replay_entry *rino)
+{
+	struct replay_entry *r;
+
+	ubifs_assert(c, rino->deletion);
+	ubifs_assert(c, key_type(c, &rino->key) == UBIFS_INO_KEY);
+
+	/*
+	 * Find the most recent entry for the inode behind @rino and check
+	 * whether it is a deletion.
+	 */
+	list_for_each_entry_reverse(r, &c->replay_list, list) {
+		ubifs_assert(c, r->sqnum >= rino->sqnum);
+		if (key_inum(c, &r->key) == key_inum(c, &rino->key))
+			return r->deletion == 0;
+
+	}
+
+	ubifs_assert(c, 0);
+	return false;
+}
+
+/**
  * apply_replay_entry - apply a replay entry to the TNC.
  * @c: UBIFS file-system description object
  * @r: replay entry to apply
@@ -236,6 +268,11 @@ static int apply_replay_entry(struct ubi
 			{
 				ino_t inum = key_inum(c, &r->key);
 
+				if (inode_still_linked(c, r)) {
+					err = 0;
+					break;
+				}
+
 				err = ubifs_tnc_remove_ino(c, inum);
 				break;
 			}



  parent reply	other threads:[~2018-12-28 11:54 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-28 11:51 [PATCH 4.19 00/46] 4.19.13-stable review Greg Kroah-Hartman
2018-12-28 11:51 ` [PATCH 4.19 01/46] iomap: Revert "fs/iomap.c: get/put the page in iomap_page_create/release()" Greg Kroah-Hartman
2018-12-28 11:51 ` [PATCH 4.19 02/46] Revert "vfs: Allow userns root to call mknod on owned filesystems." Greg Kroah-Hartman
2018-12-28 11:51 ` [PATCH 4.19 03/46] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data Greg Kroah-Hartman
2018-12-28 11:51 ` [PATCH 4.19 04/46] xhci: Dont prevent USB2 bus suspend in state check intended for USB3 only Greg Kroah-Hartman
2018-12-28 11:51 ` [PATCH 4.19 05/46] USB: xhci: fix broken_suspend placement in struct xchi_hcd Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 06/46] USB: serial: option: add GosunCn ZTE WeLink ME3630 Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 07/46] USB: serial: option: add HP lt4132 Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 08/46] USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode) Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 09/46] USB: serial: option: add Fibocom NL668 series Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 10/46] USB: serial: option: add Telit LN940 series Greg Kroah-Hartman
2018-12-28 11:52 ` Greg Kroah-Hartman [this message]
2018-12-28 11:52 ` [PATCH 4.19 12/46] scsi: t10-pi: Return correct ref tag when queue has no integrity profile Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 13/46] scsi: sd: use mempool for discard special page Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 14/46] mmc: core: Reset HPI enabled state during re-init and in case of errors Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 15/46] mmc: core: Allow BKOPS and CACHE ctrl even if no HPI support Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 16/46] mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrl Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 17/46] mmc: omap_hsmmc: fix DMA API warning Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 18/46] gpio: max7301: fix driver for use with CONFIG_VMAP_STACK Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 19/46] gpiolib-acpi: Only defer request_irq for GpioInt ACPI event handlers Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 20/46] posix-timers: Fix division by zero bug Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 21/46] KVM: X86: Fix NULL deref in vcpu_scan_ioapic Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 22/46] kvm: x86: Add AMDs EX_CFG to the list of ignored MSRs Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 23/46] KVM: Fix UAF in nested posted interrupt processing Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 24/46] Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 25/46] futex: Cure exit race Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 26/46] x86/mtrr: Dont copy uninitialized gentry fields back to userspace Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 27/46] x86/mm: Fix decoy address handling vs 32-bit builds Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 28/46] x86/vdso: Pass --eh-frame-hdr to the linker Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 29/46] x86/intel_rdt: Ensure a CPU remains online for the regions pseudo-locking sequence Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 30/46] panic: avoid deadlocks in re-entrant console drivers Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 31/46] mm: add mm_pxd_folded checks to pgtable_bytes accounting functions Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 32/46] mm: make the __PAGETABLE_PxD_FOLDED defines non-empty Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 33/46] mm: introduce mm_[p4d|pud|pmd]_folded Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 34/46] xfrm_user: fix freeing of xfrm states on acquire Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 35/46] rtlwifi: Fix leak of skb when processing C2H_BT_INFO Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 36/46] iwlwifi: mvm: dont send GEO_TX_POWER_LIMIT to old firmwares Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 37/46] Revert "mwifiex: restructure rx_reorder_tbl_lock usage" Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 38/46] iwlwifi: add new cards for 9560, 9462, 9461 and killer series Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 39/46] media: ov5640: Fix set format regression Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 40/46] mm, memory_hotplug: initialize struct pages for the full memory section Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 41/46] mm: thp: fix flags for pmd migration when split Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 42/46] mm, page_alloc: fix has_unmovable_pages for HugePages Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 43/46] mm: dont miss the last page because of round-off error Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 44/46] Input: elantech - disable elan-i2c for P52 and P72 Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 45/46] proc/sysctl: dont return ENOMEM on lookup when a table is unregistering Greg Kroah-Hartman
2018-12-28 11:52 ` [PATCH 4.19 46/46] drm/ioctl: Fix Spectre v1 vulnerabilities Greg Kroah-Hartman
2018-12-28 17:54 ` [PATCH 4.19 00/46] 4.19.13-stable review Dan Rue
2018-12-29 12:20   ` Greg Kroah-Hartman
2018-12-28 20:08 ` shuah
2018-12-29  9:55   ` Greg Kroah-Hartman
2018-12-28 21:29 ` Guenter Roeck
2018-12-29 12:20   ` Greg Kroah-Hartman
2018-12-29  9:01 ` Harsh Shandilya
2018-12-29 12:20   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181228113125.452002715@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rafal@milecki.pl \
    --cc=richard@nod.at \
    --cc=russell@personaltelco.net \
    --cc=stable@vger.kernel.org \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).