linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: sboyd@kernel.org, mturquette@baylibre.com, afaerber@suse.de,
	robh+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	linux-actions@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
	Edgar Bernardi Righi <edgar.righi@lsitec.org.br>
Subject: [PATCH 3/6] ARM: dts: Add CMU support for Actions Semi Owl S500 SoC
Date: Tue,  1 Jan 2019 00:25:14 +0530	[thread overview]
Message-ID: <20181231185517.18517-4-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20181231185517.18517-1-manivannan.sadhasivam@linaro.org>

Add Clock Management Unit (CMU) support for Actions Semi Owl family
S500 SoC.

Signed-off-by: Edgar Bernardi Righi <edgar.righi@lsitec.org.br>
[Mani: Fixed commit message and DTS]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm/boot/dts/owl-s500.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index 5ceb6cc4451d..aa758538de8c 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -3,8 +3,10 @@
  * Actions Semi S500 SoC
  *
  * Copyright (c) 2016-2017 Andreas Färber
+ * Copyright (c) 2018 Edgar Bernardi Righi
  */
 
+#include <dt-bindings/clock/actions,s500-cmu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/owl-s500-powergate.h>
 
@@ -70,6 +72,12 @@
 		#clock-cells = <0>;
 	};
 
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -124,6 +132,7 @@
 			compatible = "actions,s500-uart", "actions,owl-uart";
 			reg = <0xb0120000 0x2000>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART0>;
 			status = "disabled";
 		};
 
@@ -131,6 +140,7 @@
 			compatible = "actions,s500-uart", "actions,owl-uart";
 			reg = <0xb0122000 0x2000>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART1>;
 			status = "disabled";
 		};
 
@@ -138,6 +148,7 @@
 			compatible = "actions,s500-uart", "actions,owl-uart";
 			reg = <0xb0124000 0x2000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART2>;
 			status = "disabled";
 		};
 
@@ -145,6 +156,7 @@
 			compatible = "actions,s500-uart", "actions,owl-uart";
 			reg = <0xb0126000 0x2000>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART3>;
 			status = "disabled";
 		};
 
@@ -152,6 +164,7 @@
 			compatible = "actions,s500-uart", "actions,owl-uart";
 			reg = <0xb0128000 0x2000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART4>;
 			status = "disabled";
 		};
 
@@ -159,6 +172,7 @@
 			compatible = "actions,s500-uart", "actions,owl-uart";
 			reg = <0xb012a000 0x2000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART5>;
 			status = "disabled";
 		};
 
@@ -166,9 +180,17 @@
 			compatible = "actions,s500-uart", "actions,owl-uart";
 			reg = <0xb012c000 0x2000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART6>;
 			status = "disabled";
 		};
 
+		cmu: clock-controller@b0160000 {
+			compatible = "actions,s500-cmu";
+			reg = <0xb0160000 0x8000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+		};
+
 		timer: timer@b0168000 {
 			compatible = "actions,s500-timer";
 			reg = <0xb0168000 0x8000>;
-- 
2.17.1


  parent reply	other threads:[~2018-12-31 18:56 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-31 18:55 [PATCH 0/6] Add clock support for Actions Semi S500 SoC Manivannan Sadhasivam
2018-12-31 18:55 ` [PATCH 1/6] clk: actions: Add configurable PLL delay Manivannan Sadhasivam
2019-01-11 23:57   ` Stephen Boyd
2018-12-31 18:55 ` [PATCH 2/6] dt-bindings: clock: Add DT bindings for Actions Semi S500 CMU Manivannan Sadhasivam
2019-01-11 14:56   ` Rob Herring
2018-12-31 18:55 ` Manivannan Sadhasivam [this message]
2018-12-31 18:55 ` [PATCH 4/6] ARM: dts: Remove fake UART clock for S500 based SBCs Manivannan Sadhasivam
2018-12-31 18:55 ` [PATCH 5/6] clk: actions: Add clock driver for S500 SoC Manivannan Sadhasivam
2019-01-11 23:56   ` Stephen Boyd
2019-01-15  3:15     ` Manivannan Sadhasivam
2018-12-31 18:55 ` [PATCH 6/6] MAINTAINERS: Add linux-actions mailing list for Actions Semi Manivannan Sadhasivam
2018-12-31 19:12   ` Joe Perches
2019-01-01  3:26     ` Manivannan Sadhasivam
2019-01-01  3:32       ` Andreas Färber
2019-01-01  7:37         ` Manivannan Sadhasivam
2019-01-01 16:56       ` Joe Perches
2019-01-02  2:18         ` Manivannan Sadhasivam
2019-01-11 22:51 ` [PATCH 0/6] Add clock support for Actions Semi S500 SoC Stephen Boyd
2019-01-14  9:18   ` Manivannan Sadhasivam
2019-01-14 21:55     ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181231185517.18517-4-manivannan.sadhasivam@linaro.org \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=afaerber@suse.de \
    --cc=devicetree@vger.kernel.org \
    --cc=edgar.righi@lsitec.org.br \
    --cc=linux-actions@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).