LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <andy.gross@linaro.org>,
	David Brown <david.brown@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Arun Kumar Neelakantam <aneela@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/7] remoteproc: q6v5-mss: Active powerdomain for SDM845
Date: Sun,  6 Jan 2019 00:09:13 -0800
Message-ID: <20190106080915.4493-6-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20190106080915.4493-1-bjorn.andersson@linaro.org>

The SDM845 MSS needs the load_state powerdomain voted for during the
duration of the MSS being powered on, to let the AOSS know that it may
not perform certain power save measures. So vote for this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- New patch

 drivers/remoteproc/qcom_q6v5_mss.c | 31 ++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 62cf16ddb7af..7f86d9c551c4 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -133,6 +133,7 @@ struct rproc_hexagon_res {
 	char **proxy_clk_names;
 	char **reset_clk_names;
 	char **active_clk_names;
+	char **active_pd_names;
 	char **proxy_pd_names;
 	int version;
 	bool need_mem_protection;
@@ -159,10 +160,12 @@ struct q6v5 {
 	struct clk *active_clks[8];
 	struct clk *reset_clks[4];
 	struct clk *proxy_clks[4];
+	struct device *active_pds[1];
 	struct device *proxy_pds[3];
 	int active_clk_count;
 	int reset_clk_count;
 	int proxy_clk_count;
+	int active_pd_count;
 	int proxy_pd_count;
 
 	struct reg_info active_regs[1];
@@ -730,10 +733,16 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 
 	qcom_q6v5_prepare(&qproc->q6v5);
 
+	ret = q6v5_pds_enable(qproc, qproc->active_pds, qproc->active_pd_count);
+	if (ret < 0) {
+		dev_err(qproc->dev, "failed to enable active power domains\n");
+		goto disable_irqs;
+	}
+
 	ret = q6v5_pds_enable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
 	if (ret < 0) {
 		dev_err(qproc->dev, "failed to enable proxy power domains\n");
-		goto disable_irqs;
+		goto disable_active_pds;
 	}
 
 	ret = q6v5_regulator_enable(qproc, qproc->proxy_regs,
@@ -839,6 +848,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 			       qproc->proxy_reg_count);
 disable_proxy_pds:
 	q6v5_pds_disable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
+disable_active_pds:
+	q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count);
 disable_irqs:
 	qcom_q6v5_unprepare(&qproc->q6v5);
 
@@ -878,6 +889,7 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
 			 qproc->active_clk_count);
 	q6v5_regulator_disable(qproc, qproc->active_regs,
 			       qproc->active_reg_count);
+	q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count);
 
 	/* In case of failure or coredump scenario where reclaiming MBA memory
 	 * could not happen reclaim it here.
@@ -1410,11 +1422,19 @@ static int q6v5_probe(struct platform_device *pdev)
 	}
 	qproc->active_reg_count = ret;
 
+	ret = q6v5_pds_attach(&pdev->dev, qproc->active_pds,
+			      desc->active_pd_names);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to attach active power domains\n");
+		goto free_rproc;
+	}
+	qproc->active_pd_count = ret;
+
 	ret = q6v5_pds_attach(&pdev->dev, qproc->proxy_pds,
 			      desc->proxy_pd_names);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to init power domains\n");
-		goto free_rproc;
+		goto detach_active_pds;
 	}
 	qproc->proxy_pd_count = ret;
 
@@ -1446,6 +1466,8 @@ static int q6v5_probe(struct platform_device *pdev)
 
 detach_proxy_pds:
 	q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
+detach_active_pds:
+	q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
 free_rproc:
 	rproc_free(rproc);
 
@@ -1463,6 +1485,7 @@ static int q6v5_remove(struct platform_device *pdev)
 	qcom_remove_smd_subdev(qproc->rproc, &qproc->smd_subdev);
 	qcom_remove_ssr_subdev(qproc->rproc, &qproc->ssr_subdev);
 
+	q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
 	q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
 
 	rproc_free(qproc->rproc);
@@ -1489,6 +1512,10 @@ static const struct rproc_hexagon_res sdm845_mss = {
 			"mnoc_axi",
 			NULL
 	},
+	.active_pd_names = (char*[]){
+			"load_state",
+			NULL
+	},
 	.proxy_pd_names = (char*[]){
 			"cx",
 			"mx",
-- 
2.18.0


  parent reply index

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-06  8:09 [PATCH v2 0/7] Qualcomm AOSS QMP side channel binding and driver Bjorn Andersson
2019-01-06  8:09 ` [PATCH v2 1/7] dt-bindings: soc: qcom: Add AOSS QMP binding Bjorn Andersson
2019-01-11 22:10   ` Rob Herring
2019-01-14 22:30   ` Stephen Boyd
2019-01-06  8:09 ` [PATCH v2 2/7] soc: qcom: Add AOSS QMP communication driver Bjorn Andersson
2019-01-10 12:48   ` Arun Kumar Neelakantam
2019-01-14 22:36   ` Stephen Boyd
2019-01-14 23:20     ` Bjorn Andersson
2019-01-06  8:09 ` [PATCH v2 3/7] soc: qcom: Add AOSS QMP genpd provider Bjorn Andersson
2019-01-10  4:59   ` Sai Prakash Ranjan
2019-01-14 22:40   ` Stephen Boyd
2019-01-14 23:29     ` Bjorn Andersson
2019-01-06  8:09 ` [PATCH v2 4/7] remoteproc: q6v5-mss: Vote for rpmh power domains Bjorn Andersson
2019-01-09 14:39   ` Sibi Sankar
2019-01-06  8:09 ` Bjorn Andersson [this message]
2019-01-09 14:40   ` [PATCH v2 5/7] remoteproc: q6v5-mss: Active powerdomain for SDM845 Sibi Sankar
2019-01-06  8:09 ` [PATCH v2 6/7] amba: Allow pclk to be controlled by power domain Bjorn Andersson
2019-01-06  8:09 ` [(RFC) PATCH v2 7/7] soc: qcom: aoss-qmp: Add cooling device support Bjorn Andersson
2019-01-11 22:11   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190106080915.4493-6-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=aneela@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git