LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: andy.gross@linaro.org, robh@kernel.org, viresh.kumar@linaro.org,
	sboyd@kernel.org, ulf.hansson@linaro.org,
	collinsd@codeaurora.org, mka@chromium.org
Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, henryc.chen@mediatek.com,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v11 1/9] dt-bindings: opp: Introduce opp-level bindings
Date: Thu, 10 Jan 2019 09:32:01 +0530
Message-ID: <20190110040209.6028-2-rnayak@codeaurora.org> (raw)
In-Reply-To: <20190110040209.6028-1-rnayak@codeaurora.org>

Add opp-level as an additional property in the OPP node to describe
the performance level of the device.

On some SoCs (especially from Qualcomm and MediaTek) this value
is communicated to a remote microprocessor by the CPU, which
then takes some actions (like adjusting voltage values across various
rails) based on the value passed.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 Documentation/devicetree/bindings/opp/opp.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index c396c4c0af92..76b6c79604a5 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -129,6 +129,9 @@ Optional properties:
 - opp-microamp-<name>: Named opp-microamp property. Similar to
   opp-microvolt-<name> property, but for microamp instead.
 
+- opp-level: A value representing the performance level of the device,
+  expressed as a 32-bit integer.
+
 - clock-latency-ns: Specifies the maximum possible transition latency (in
   nanoseconds) for switching to this OPP from any other OPP.
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


  reply index

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-10  4:02 [PATCH v11 0/9] Add power domain driver for corners on msm8996/sdm845 Rajendra Nayak
2019-01-10  4:02 ` Rajendra Nayak [this message]
2019-01-10  6:26   ` [PATCH v11 1/9] dt-bindings: opp: Introduce opp-level bindings Viresh Kumar
2019-01-11 19:06   ` Stephen Boyd
2019-01-11 22:16   ` Doug Anderson
2019-01-15 19:59   ` Rob Herring
2019-01-10  4:02 ` [PATCH v11 2/9] OPP: Add support for parsing the 'opp-level' property Rajendra Nayak
2019-01-10  6:29   ` Viresh Kumar
2019-01-11 19:06   ` Stephen Boyd
2019-01-10  4:02 ` [PATCH v11 3/9] dt-bindings: power: Add qcom rpm power domain driver bindings Rajendra Nayak
2019-01-10  4:02 ` [PATCH v11 4/9] soc: qcom: rpmpd: Add a Power domain driver to model corners Rajendra Nayak
2019-01-17 17:42   ` Guenter Roeck
2019-01-18  4:54     ` Rajendra Nayak
2019-01-10  4:02 ` [PATCH v11 5/9] soc: qcom: rpmpd: Add support for get/set performance state Rajendra Nayak
2019-01-10  4:02 ` [PATCH v11 6/9] arm64: dts: msm8996: Add rpmpd device node Rajendra Nayak
2019-01-10  4:02 ` [PATCH v11 7/9] soc: qcom: rpmhpd: Add RPMh power domain driver Rajendra Nayak
2019-01-10  4:02 ` [PATCH v11 8/9] arm64: dts: sdm845: Add rpmh powercontroller node Rajendra Nayak
2019-01-10  4:02 ` [PATCH v11 9/9] soc: qcom: rpmhpd: Mark mx as a parent for cx Rajendra Nayak
2019-01-10  6:33 ` [PATCH v11 0/9] Add power domain driver for corners on msm8996/sdm845 Viresh Kumar
2019-01-16  5:52   ` Bjorn Andersson
2019-01-16 15:18     ` Ulf Hansson
2019-01-17  4:24     ` Viresh Kumar
2019-01-17 15:03 ` Marc Gonzalez
2019-01-18  3:54   ` Rajendra Nayak
2019-01-18 10:17     ` Marc Gonzalez
2019-01-21  9:20       ` Rajendra Nayak

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190110040209.6028-2-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=collinsd@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=henryc.chen@mediatek.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox