From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Tore Anderson <tore@fud.no>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 3.18 02/47] USB: serial: option: add HP lt4132
Date: Fri, 11 Jan 2019 15:07:47 +0100 [thread overview]
Message-ID: <20190111130956.524117569@linuxfoundation.org> (raw)
In-Reply-To: <20190111130956.170952125@linuxfoundation.org>
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tore Anderson <tore@fud.no>
commit d57ec3c83b5153217a70b561d4fb6ed96f2f7a25 upstream.
The HP lt4132 is a rebranded Huawei ME906s-158 LTE modem.
The interface with protocol 0x16 is "CDC ECM & NCM" according to the *.inf
files included with the Windows driver. Attaching the option driver to it
doesn't result in a /dev/ttyUSB* device being created, so I've excluded it.
Note that it is also excluded for corresponding Huawei-branded devices, cf.
commit d544db293a44 ("USB: support new huawei devices in option.c").
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3
P: Vendor=03f0 ProdID=a31d Rev=01.02
S: Manufacturer=HP Inc.
S: Product=HP lt4132 LTE/HSPA+ 4G Module
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=2mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option
I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=06 Prot=16 Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3
P: Vendor=03f0 ProdID=a31d Rev=01.02
S: Manufacturer=HP Inc.
S: Product=HP lt4132 LTE/HSPA+ 4G Module
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=2mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option
I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option
I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option
I: If#=0x6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3
P: Vendor=03f0 ProdID=a31d Rev=01.02
S: Manufacturer=HP Inc.
S: Product=HP lt4132 LTE/HSPA+ 4G Module
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 3 Cfg#= 3 Atr=a0 MxPwr=2mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option
Signed-off-by: Tore Anderson <tore@fud.no>
Cc: stable@vger.kernel.org
[ johan: drop id defines ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2042,7 +2042,12 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x10) }, /* HP lt4132 (Huawei ME906s-158) */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x12) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
next prev parent reply other threads:[~2019-01-11 14:14 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-11 14:07 [PATCH 3.18 00/47] 3.18.132-stable review Greg Kroah-Hartman
2019-01-11 14:07 ` [PATCH 3.18 01/47] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data Greg Kroah-Hartman
2019-01-11 14:07 ` Greg Kroah-Hartman [this message]
2019-01-11 14:07 ` [PATCH 3.18 03/47] mmc: core: Reset HPI enabled state during re-init and in case of errors Greg Kroah-Hartman
2019-01-11 14:07 ` [PATCH 3.18 04/47] mmc: omap_hsmmc: fix DMA API warning Greg Kroah-Hartman
2019-01-11 14:07 ` [PATCH 3.18 05/47] gpio: max7301: fix driver for use with CONFIG_VMAP_STACK Greg Kroah-Hartman
2019-01-11 14:07 ` [PATCH 3.18 06/47] Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels Greg Kroah-Hartman
2019-01-11 14:07 ` [PATCH 3.18 07/47] x86/mtrr: Dont copy uninitialized gentry fields back to userspace Greg Kroah-Hartman
2019-01-11 14:07 ` [PATCH 3.18 08/47] ax25: fix a use-after-free in ax25_fillin_cb() Greg Kroah-Hartman
2019-01-11 14:07 ` [PATCH 3.18 09/47] ibmveth: fix DMA unmap error in ibmveth_xmit_start error path Greg Kroah-Hartman
2019-01-11 14:07 ` [PATCH 3.18 10/47] ipv6: explicitly initialize udp6_addr in udp_sock_create6() Greg Kroah-Hartman
2019-01-11 14:07 ` [PATCH 3.18 11/47] isdn: fix kernel-infoleak in capi_unlocked_ioctl Greg Kroah-Hartman
2019-01-11 14:07 ` [PATCH 3.18 12/47] netrom: fix locking in nr_find_socket() Greg Kroah-Hartman
2019-01-11 14:07 ` [PATCH 3.18 13/47] packet: validate address length Greg Kroah-Hartman
2019-01-11 14:07 ` [PATCH 3.18 14/47] packet: validate address length if non-zero Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 15/47] sctp: initialize sin6_flowinfo for ipv6 addrs in sctp_inet6addr_event Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 16/47] vhost: make sure used idx is seen before log in vhost_add_used_n() Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 17/47] VSOCK: Send reset control packet when socket is partially bound Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 18/47] xen/netfront: tolerate frags with no data Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 19/47] sock: Make sock->sk_stamp thread-safe Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 20/47] USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 21/47] usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable() Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 22/47] KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 23/47] ext4: fix possible use after free in ext4_quota_enable Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 24/47] ext4: missing unlock/put_page() in ext4_try_to_write_inline_data() Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 25/47] ext4: force inode writes when nfsd calls commit_metadata() Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 26/47] cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 27/47] media: vivid: free bitmap_cap when updating std/timings/etc Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 28/47] MIPS: Ensure pmd_present() returns false after pmd_mknotpresent() Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 29/47] MIPS: Align kernel load address to 64KB Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 30/47] CIFS: Fix error mapping for SMB2_LOCK command which caused OFD lock problem Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 31/47] scsi: zfcp: fix posting too many status read buffers leading to adapter shutdown Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 32/47] fork: record start_time late Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 33/47] sunrpc: fix cache_head leak due to queued request Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 34/47] sunrpc: use SVC_NET() in svcauth_gss_* functions Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 35/47] ALSA: cs46xx: Potential NULL dereference in probe Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 36/47] ALSA: usb-audio: Avoid access before bLength check in build_audio_procunit() Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 37/47] ALSA: usb-audio: Fix an out-of-bound read in create_composite_quirks Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 38/47] dlm: fixed memory leaks after failed ls_remove_names allocation Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 39/47] dlm: possible memory leak on error path in create_lkb() Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 40/47] dlm: lost put_lkb on error path in receive_convert() and receive_unlock() Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 41/47] dlm: memory leaks on error path in dlm_user_request() Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 42/47] gfs2: Fix loop in gfs2_rbm_find Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 43/47] b43: Fix error in cordic routine Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 44/47] 9p/net: put a lower bound on msize Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 45/47] ceph: dont update importing caps mseq when handing cap export Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 46/47] genwqe: Fix size check Greg Kroah-Hartman
2019-01-11 14:08 ` [PATCH 3.18 47/47] power: supply: olpc_battery: correct the temperature units Greg Kroah-Hartman
2019-01-11 21:50 ` [PATCH 3.18 00/47] 3.18.132-stable review shuah
2019-01-12 14:58 ` Harsh Shandilya
2019-01-12 17:42 ` Guenter Roeck
2019-01-13 7:44 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190111130956.524117569@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tore@fud.no \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).