LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Rosin <peda@axentia.se>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: Peter Rosin <peda@axentia.se>, David Airlie <airlied@linux.ie>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Archit Taneja <architt@codeaurora.org>,
	Andrzej Hajda <a.hajda@samsung.com>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	"dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Subject: [PATCH v4 1/5] dt-bindings: display: bridge: fork out ti,ds90c185 from lvds-transmitter
Date: Fri, 11 Jan 2019 15:18:55 +0000
Message-ID: <20190111151843.11114-2-peda@axentia.se> (raw)
In-Reply-To: <20190111151843.11114-1-peda@axentia.se>

DS90C185 has a shutdown pin which does not fit in the lvds-transmitter
binding, which is meant to be generic.

The sister chip DS90C187 is similar to DS90C185, describe it here as well.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 .../bindings/display/bridge/lvds-transmitter.txt   | 10 ++--
 .../bindings/display/bridge/ti,ds90c185.txt        | 55 ++++++++++++++++++++++
 2 files changed, 59 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
index 50220190c203..bc6960741cb5 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
@@ -22,13 +22,11 @@ among others.
 
 Required properties:
 
-- compatible: Must be one or more of the following
-  - "ti,ds90c185" for the TI DS90C185 FPD-Link Serializer
-  - "lvds-encoder" for a generic LVDS encoder device
+- compatible: Must be "lvds-encoder"
 
-  When compatible with the generic version, nodes must list the
-  device-specific version corresponding to the device first
-  followed by the generic version.
+  Any encoder compatible with this generic binding, but with additional
+  properties not listed here, must list a device specific compatible first
+  followed by this generic compatible.
 
 Required nodes:
 
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt
new file mode 100644
index 000000000000..e575f996959a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt
@@ -0,0 +1,55 @@
+Texas Instruments FPD-Link (LVDS) Serializer
+--------------------------------------------
+
+The DS90C185 and DS90C187 are low-power serializers for portable
+battery-powered applications that reduces the size of the RGB
+interface between the host GPU and the display.
+
+Required properties:
+
+- compatible: Should be
+  "ti,ds90c185", "lvds-encoder"  for the TI DS90C185 FPD-Link Serializer
+  "ti,ds90c187", "lvds-encoder"  for the TI DS90C187 FPD-Link Serializer
+
+Optional properties:
+
+- powerdown-gpios: Power down control GPIO (the PDB pin, active-low)
+
+Required nodes:
+
+The devices have two video ports. Their connections are modeled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for parallel input
+- Video port 1 for LVDS output
+
+
+Example
+-------
+
+lvds-encoder {
+	compatible = "ti,ds90c185", "lvds-encoder";
+
+	powerdown-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			lvds_enc_in: endpoint {
+				remote-endpoint = <&lcdc_out_rgb>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lvds_enc_out: endpoint {
+				remote-endpoint = <&lvds_panel_in>;
+			};
+		};
+	};
+};
-- 
2.11.0


  reply index

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20190115040858epcas3p4b4b9bfa6f6706842ad92825fea36d59e@epcas3p4.samsung.com>
2019-01-11 15:18 ` [PATCH v4 0/5] drm/bridge: various small lvds-encoder things Peter Rosin
2019-01-11 15:18   ` Peter Rosin [this message]
2019-01-15 20:06     ` [PATCH v4 1/5] dt-bindings: display: bridge: fork out ti,ds90c185 from lvds-transmitter Rob Herring
2019-01-11 15:19   ` [PATCH v4 2/5] dt-bindings: display: bridge: lvds-transmitter: cleanup example Peter Rosin
2019-01-11 15:19   ` [PATCH v4 3/5] dt-bindings: display: bridge: thc63lvdm83d: use standard powerdown-gpios Peter Rosin
2019-01-11 15:19   ` [PATCH v4 4/5] drm/bridge: lvds-encoder: add dev helper variable in .probe() Peter Rosin
2019-01-18  7:31     ` Andrzej Hajda
2019-01-11 15:19   ` [PATCH v4 5/5] drm/bridge: lvds-encoder: add powerdown-gpios support Peter Rosin
2019-01-18  7:32     ` Andrzej Hajda
2019-01-18  8:43   ` [PATCH v4 0/5] drm/bridge: various small lvds-encoder things Andrzej Hajda
2019-01-18 23:11     ` [PATCH] drm/bridge: lvds-encoder: remove surplus NULL checks Peter Rosin
2019-01-21  9:33       ` Daniel Vetter
2019-01-22 21:04       ` Laurent Pinchart

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190111151843.11114-2-peda@axentia.se \
    --to=peda@axentia.se \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=architt@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox