linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
To: linux-gpio@vger.kernel.org
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
	linux-kernel@vger.kernel.org,
	"Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
Subject: [PATCH 1/2] gpio: hlwd: Add basic IRQ support
Date: Sun, 13 Jan 2019 14:58:43 +0100	[thread overview]
Message-ID: <20190113135844.13109-2-j.neuschaefer@gmx.net> (raw)
In-Reply-To: <20190113135844.13109-1-j.neuschaefer@gmx.net>

This patch implements level-triggered IRQs in the Hollywood GPIO driver.
Edge triggered interrupts are not supported in this GPIO controller, so
I moved their emulation into a separate patch.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---

I'm not entirely sure about the locking, but lockdep doesn't complain.
---
 drivers/gpio/Kconfig     |   1 +
 drivers/gpio/gpio-hlwd.c | 136 ++++++++++++++++++++++++++++++++++++++-
 2 files changed, 136 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b5a2845347ec..f77180dd87bd 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -258,6 +258,7 @@ config GPIO_HLWD
 	tristate "Nintendo Wii (Hollywood) GPIO"
 	depends on OF_GPIO
 	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
 	help
 	  Select this to support the GPIO controller of the Nintendo Wii.
 
diff --git a/drivers/gpio/gpio-hlwd.c b/drivers/gpio/gpio-hlwd.c
index a63136a68ba3..9a93546f3d11 100644
--- a/drivers/gpio/gpio-hlwd.c
+++ b/drivers/gpio/gpio-hlwd.c
@@ -48,9 +48,107 @@
 
 struct hlwd_gpio {
 	struct gpio_chip gpioc;
+	struct irq_chip irqc;
 	void __iomem *regs;
+	int irq;
 };
 
+static void hlwd_gpio_irqhandler(struct irq_desc *desc)
+{
+	struct hlwd_gpio *hlwd =
+		gpiochip_get_data(irq_desc_get_handler_data(desc));
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned long flags;
+	unsigned long pending;
+	int hwirq;
+
+	spin_lock_irqsave(&hlwd->gpioc.bgpio_lock, flags);
+	pending = hlwd->gpioc.read_reg(hlwd->regs + HW_GPIOB_INTFLAG);
+	pending &= hlwd->gpioc.read_reg(hlwd->regs + HW_GPIOB_INTMASK);
+	spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
+
+	chained_irq_enter(chip, desc);
+
+	for_each_set_bit(hwirq, &pending, 32) {
+		int irq = irq_find_mapping(hlwd->gpioc.irq.domain, hwirq);
+
+		generic_handle_irq(irq);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static void hlwd_gpio_irq_ack(struct irq_data *data)
+{
+	struct hlwd_gpio *hlwd =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+
+	hlwd->gpioc.write_reg(hlwd->regs + HW_GPIOB_INTFLAG, BIT(data->hwirq));
+}
+
+static void hlwd_gpio_irq_mask(struct irq_data *data)
+{
+	struct hlwd_gpio *hlwd =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&hlwd->gpioc.bgpio_lock, flags);
+	mask = hlwd->gpioc.read_reg(hlwd->regs + HW_GPIOB_INTMASK);
+	mask &= ~BIT(data->hwirq);
+	hlwd->gpioc.write_reg(hlwd->regs + HW_GPIOB_INTMASK, mask);
+	spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
+}
+
+static void hlwd_gpio_irq_unmask(struct irq_data *data)
+{
+	struct hlwd_gpio *hlwd =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&hlwd->gpioc.bgpio_lock, flags);
+	mask = hlwd->gpioc.read_reg(hlwd->regs + HW_GPIOB_INTMASK);
+	mask |= BIT(data->hwirq);
+	hlwd->gpioc.write_reg(hlwd->regs + HW_GPIOB_INTMASK, mask);
+	spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
+}
+
+static void hlwd_gpio_irq_enable(struct irq_data *data)
+{
+	hlwd_gpio_irq_ack(data);
+	hlwd_gpio_irq_unmask(data);
+}
+
+static int hlwd_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
+{
+	struct hlwd_gpio *hlwd =
+		gpiochip_get_data(irq_data_get_irq_chip_data(data));
+	unsigned long flags;
+	u32 level;
+
+	spin_lock_irqsave(&hlwd->gpioc.bgpio_lock, flags);
+
+	switch (flow_type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		level = hlwd->gpioc.read_reg(hlwd->regs + HW_GPIOB_INTLVL);
+		level |= BIT(data->hwirq);
+		hlwd->gpioc.write_reg(hlwd->regs + HW_GPIOB_INTLVL, level);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		level = hlwd->gpioc.read_reg(hlwd->regs + HW_GPIOB_INTLVL);
+		level &= ~BIT(data->hwirq);
+		hlwd->gpioc.write_reg(hlwd->regs + HW_GPIOB_INTLVL, level);
+		break;
+	default:
+		spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
+		return -EINVAL;
+	}
+
+	spin_unlock_irqrestore(&hlwd->gpioc.bgpio_lock, flags);
+	return 0;
+}
+
 static int hlwd_gpio_probe(struct platform_device *pdev)
 {
 	struct hlwd_gpio *hlwd;
@@ -92,7 +190,43 @@ static int hlwd_gpio_probe(struct platform_device *pdev)
 		ngpios = 32;
 	hlwd->gpioc.ngpio = ngpios;
 
-	return devm_gpiochip_add_data(&pdev->dev, &hlwd->gpioc, hlwd);
+	res = devm_gpiochip_add_data(&pdev->dev, &hlwd->gpioc, hlwd);
+	if (res)
+		return res;
+
+	/* Mask and ack all interrupts */
+	iowrite32be(0, hlwd->regs + HW_GPIOB_INTMASK);
+	iowrite32be(0xffffffff, hlwd->regs + HW_GPIOB_INTFLAG);
+
+	/*
+	 * If this GPIO controller is not marked as an interrupt controller in
+	 * the DT, return.
+	 */
+	if (!of_property_read_bool(pdev->dev.of_node, "interrupt-controller"))
+		return 0;
+
+	hlwd->irq = platform_get_irq(pdev, 0);
+	if (hlwd->irq < 0) {
+		dev_info(&pdev->dev, "platform_get_irq returned %d\n",
+			 hlwd->irq);
+		return hlwd->irq;
+	}
+
+	hlwd->irqc.name = "GPIO";
+	hlwd->irqc.irq_mask = hlwd_gpio_irq_mask;
+	hlwd->irqc.irq_unmask = hlwd_gpio_irq_unmask;
+	hlwd->irqc.irq_enable = hlwd_gpio_irq_enable;
+	hlwd->irqc.irq_set_type = hlwd_gpio_irq_set_type;
+
+	res = gpiochip_irqchip_add(&hlwd->gpioc, &hlwd->irqc, 0,
+				   handle_level_irq, IRQ_TYPE_NONE);
+	if (res)
+		return res;
+
+	gpiochip_set_chained_irqchip(&hlwd->gpioc, &hlwd->irqc,
+				     hlwd->irq, hlwd_gpio_irqhandler);
+
+	return 0;
 }
 
 static const struct of_device_id hlwd_gpio_match[] = {
-- 
2.20.1


  reply	other threads:[~2019-01-13 14:00 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-13 13:58 [PATCH 0/2] GPIO: hlwd: Implement IRQ support Jonathan Neuschäfer
2019-01-13 13:58 ` Jonathan Neuschäfer [this message]
2019-01-14 10:20   ` [PATCH 1/2] gpio: hlwd: Add basic " Linus Walleij
2019-01-14 18:38     ` Jonathan Neuschäfer
2019-01-13 13:58 ` [PATCH 2/2] gpio: hlwd: Implement edge trigger emulation Jonathan Neuschäfer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190113135844.13109-2-j.neuschaefer@gmx.net \
    --to=j.neuschaefer@gmx.net \
    --cc=bgolaszewski@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).