linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Cc: Eric Auger <eric.auger@redhat.com>,
	"yi.l.liu@linux.intel.com" <yi.l.liu@linux.intel.com>,
	"kevin.tian@intel.com" <kevin.tian@intel.com>,
	"alex.williamson@redhat.com" <alex.williamson@redhat.com>,
	"ashok.raj@intel.com" <ashok.raj@intel.com>,
	"kvm@vger.kernel.org" <kvm@vger.kernel.org>,
	"peter.maydell@linaro.org" <peter.maydell@linaro.org>,
	Will Deacon <Will.Deacon@arm.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Christoffer Dall <Christoffer.Dall@arm.com>,
	Marc Zyngier <Marc.Zyngier@arm.com>,
	"iommu@lists.linux-foundation.org"
	<iommu@lists.linux-foundation.org>,
	Robin Murphy <Robin.Murphy@arm.com>,
	"kvmarm@lists.cs.columbia.edu" <kvmarm@lists.cs.columbia.edu>,
	"eric.auger.pro@gmail.com" <eric.auger.pro@gmail.com>,
	jacob.jun.pan@linux.intel.com
Subject: Re: [RFC v3 14/21] iommu: introduce device fault data
Date: Mon, 14 Jan 2019 14:32:08 -0800	[thread overview]
Message-ID: <20190114143208.66eac25a@jacob-builder> (raw)
In-Reply-To: <63a19100-c3dd-9dbd-b37a-9dfbe254459e@arm.com>

On Fri, 11 Jan 2019 11:06:29 +0000
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> wrote:

> On 10/01/2019 18:45, Jacob Pan wrote:
> > On Tue,  8 Jan 2019 11:26:26 +0100
> > Eric Auger <eric.auger@redhat.com> wrote:
> >   
> >> From: Jacob Pan <jacob.jun.pan@linux.intel.com>
> >>
> >> Device faults detected by IOMMU can be reported outside IOMMU
> >> subsystem for further processing. This patch intends to provide
> >> a generic device fault data such that device drivers can be
> >> communicated with IOMMU faults without model specific knowledge.
> >>
> >> The proposed format is the result of discussion at:
> >> https://lkml.org/lkml/2017/11/10/291
> >> Part of the code is based on Jean-Philippe Brucker's patchset
> >> (https://patchwork.kernel.org/patch/9989315/).
> >>
> >> The assumption is that model specific IOMMU driver can filter and
> >> handle most of the internal faults if the cause is within IOMMU
> >> driver control. Therefore, the fault reasons can be reported are
> >> grouped and generalized based common specifications such as PCI
> >> ATS.
> >>
> >> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> >> Signed-off-by: Jean-Philippe Brucker
> >> <jean-philippe.brucker@arm.com> Signed-off-by: Liu, Yi L
> >> <yi.l.liu@linux.intel.com> Signed-off-by: Ashok Raj
> >> <ashok.raj@intel.com> Signed-off-by: Eric Auger
> >> <eric.auger@redhat.com> [moved part of the iommu_fault_event
> >> struct in the uapi, enriched the fault reasons to be able to map
> >> unrecoverable SMMUv3 errors] ---
> >>  include/linux/iommu.h      | 55 ++++++++++++++++++++++++-
> >>  include/uapi/linux/iommu.h | 83
> >> ++++++++++++++++++++++++++++++++++++++ 2 files changed, 136
> >> insertions(+), 2 deletions(-)
> >>
> >> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> >> index 244c1a3d5989..1dedc2d247c2 100644
> >> --- a/include/linux/iommu.h
> >> +++ b/include/linux/iommu.h
> >> @@ -49,13 +49,17 @@ struct bus_type;
> >>  struct device;
> >>  struct iommu_domain;
> >>  struct notifier_block;
> >> +struct iommu_fault_event;
> >>  
> >>  /* iommu fault flags */
> >> -#define IOMMU_FAULT_READ	0x0
> >> -#define IOMMU_FAULT_WRITE	0x1
> >> +#define IOMMU_FAULT_READ		(1 << 0)
> >> +#define IOMMU_FAULT_WRITE		(1 << 1)
> >> +#define IOMMU_FAULT_EXEC		(1 << 2)
> >> +#define IOMMU_FAULT_PRIV		(1 << 3)
> >>  
> >>  typedef int (*iommu_fault_handler_t)(struct iommu_domain *,
> >>  			struct device *, unsigned long, int, void
> >> *); +typedef int (*iommu_dev_fault_handler_t)(struct
> >> iommu_fault_event *, void *); 
> >>  struct iommu_domain_geometry {
> >>  	dma_addr_t aperture_start; /* First address that can be
> >> mapped    */ @@ -255,6 +259,52 @@ struct iommu_device {
> >>  	struct device *dev;
> >>  };
> >>  
> >> +/**
> >> + * struct iommu_fault_event - Generic per device fault data
> >> + *
> >> + * - PCI and non-PCI devices
> >> + * - Recoverable faults (e.g. page request), information based on
> >> PCI ATS
> >> + * and PASID spec.
> >> + * - Un-recoverable faults of device interest
> >> + * - DMA remapping and IRQ remapping faults
> >> + *
> >> + * @fault: fault descriptor
> >> + * @device_private: if present, uniquely identify device-specific
> >> + *                  private data for an individual page request.
> >> + * @iommu_private: used by the IOMMU driver for storing
> >> fault-specific
> >> + *                 data. Users should not modify this field before
> >> + *                 sending the fault response.
> >> + */
> >> +struct iommu_fault_event {
> >> +	struct iommu_fault fault;
> >> +	u64 device_private;  
> > I think we want to move device_private to uapi since it gets
> > injected into the guest, then returned by guest in case of page
> > response. For VT-d we also need 128 bits of private data. VT-d
> > spec. 7.7.1  
> 
> Ah, I didn't notice the format changed in VT-d rev3. On that topic,
> how do we manage future extensions to the iommu_fault struct? Should
> we add ~48 bytes of padding after device_private, along with some
> flags telling which field is valid, or deal with it using a structure
> version like we do for the invalidate and bind structs? In the first
> case, iommu_fault wouldn't fit in a 64-byte cacheline anymore, but
> I'm not sure we care.
> 
IMHO, I like version and padding. I don't see a need for flags once we
have version.

> > For exception tracking (e.g. unanswered page request), I can add
> > timer and list info later when I include PRQ. sounds ok?  
> >> +	u64 iommu_private;  
> [...]
> >> +/**
> >> + * struct iommu_fault - Generic fault data
> >> + *
> >> + * @type contains fault type
> >> + * @reason fault reasons if relevant outside IOMMU driver.
> >> + * IOMMU driver internal faults are not reported.
> >> + * @addr: tells the offending page address
> >> + * @fetch_addr: tells the address that caused an abort, if any
> >> + * @pasid: contains process address space ID, used in shared
> >> virtual memory
> >> + * @page_req_group_id: page request group index
> >> + * @last_req: last request in a page request group
> >> + * @pasid_valid: indicates if the PRQ has a valid PASID
> >> + * @prot: page access protection flag:
> >> + *	IOMMU_FAULT_READ, IOMMU_FAULT_WRITE
> >> + */
> >> +
> >> +struct iommu_fault {
> >> +	__u32	type;   /* enum iommu_fault_type */
> >> +	__u32	reason; /* enum iommu_fault_reason */
> >> +	__u64	addr;
> >> +	__u64	fetch_addr;
> >> +	__u32	pasid;
> >> +	__u32	page_req_group_id;
> >> +	__u32	last_req;
> >> +	__u32	pasid_valid;
> >> +	__u32	prot;
> >> +	__u32	access;  
> 
> What does @access contain? Can it be squashed into @prot?
> 
I agreed.

how about this?
#define IOMMU_FAULT_VERSION_V1 0x1
struct iommu_fault {
	__u16 version;
	__u16 type;
	__u32 reason;
	__u64 addr;
	__u32 pasid;
	__u32 page_req_group_id;
	__u32 last_req : 1;
	__u32 pasid_valid : 1;
	__u32 prot;
	__u64 device_private[2];
	__u8 padding[48];
};


> Thanks,
> Jean
> 
> > relocated to uapi, Yi can you confirm?
> > 	__u64 device_private[2];
> >   
> >> +};
> >>  #endif /* _UAPI_IOMMU_H */  
> > 
> > _______________________________________________
> > iommu mailing list
> > iommu@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/iommu
> >   
> 

[Jacob Pan]

  reply	other threads:[~2019-01-14 22:30 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-08 10:26 [RFC v3 00/21] SMMUv3 Nested Stage Setup Eric Auger
2019-01-08 10:26 ` [RFC v3 01/21] iommu: Introduce set_pasid_table API Eric Auger
2019-01-11 18:16   ` Jean-Philippe Brucker
2019-01-25  8:39     ` Auger Eric
2019-01-25  8:55       ` Auger Eric
2019-01-25 10:33         ` Jean-Philippe Brucker
2019-01-11 18:43   ` Alex Williamson
2019-01-25  9:20     ` Auger Eric
2019-01-08 10:26 ` [RFC v3 02/21] iommu: Introduce cache_invalidate API Eric Auger
2019-01-11 21:30   ` Alex Williamson
2019-01-25 16:49     ` Auger Eric
2019-01-28 17:32       ` Jean-Philippe Brucker
2019-01-29 17:49         ` Auger Eric
2019-01-29 23:16       ` Alex Williamson
2019-01-30  8:48         ` Auger Eric
2019-01-08 10:26 ` [RFC v3 03/21] iommu: Introduce bind_guest_msi Eric Auger
2019-01-11 22:44   ` Alex Williamson
2019-01-25 17:51     ` Auger Eric
2019-01-25 18:11     ` Auger Eric
2019-01-08 10:26 ` [RFC v3 04/21] vfio: VFIO_IOMMU_SET_PASID_TABLE Eric Auger
2019-01-11 22:50   ` Alex Williamson
2019-01-15 21:34     ` Auger Eric
2019-01-08 10:26 ` [RFC v3 05/21] vfio: VFIO_IOMMU_CACHE_INVALIDATE Eric Auger
2019-01-08 10:26 ` [RFC v3 06/21] vfio: VFIO_IOMMU_BIND_MSI Eric Auger
2019-01-11 23:02   ` Alex Williamson
2019-01-11 23:23     ` Alex Williamson
2019-01-08 10:26 ` [RFC v3 07/21] iommu/arm-smmu-v3: Link domains and devices Eric Auger
2019-01-08 10:26 ` [RFC v3 08/21] iommu/arm-smmu-v3: Maintain a SID->device structure Eric Auger
2019-01-08 10:26 ` [RFC v3 09/21] iommu/smmuv3: Get prepared for nested stage support Eric Auger
2019-01-11 16:04   ` Jean-Philippe Brucker
2019-01-25 19:27   ` Robin Murphy
2019-01-08 10:26 ` [RFC v3 10/21] iommu/smmuv3: Implement set_pasid_table Eric Auger
2019-01-08 10:26 ` [RFC v3 11/21] iommu/smmuv3: Implement cache_invalidate Eric Auger
2019-01-11 16:59   ` Jean-Philippe Brucker
2019-01-08 10:26 ` [RFC v3 12/21] dma-iommu: Implement NESTED_MSI cookie Eric Auger
2019-01-08 10:26 ` [RFC v3 13/21] iommu/smmuv3: Implement bind_guest_msi Eric Auger
2019-01-08 10:26 ` [RFC v3 14/21] iommu: introduce device fault data Eric Auger
     [not found]   ` <20190110104544.26f3bcb1@jacob-builder>
2019-01-11 11:06     ` Jean-Philippe Brucker
2019-01-14 22:32       ` Jacob Pan [this message]
2019-01-16 15:52         ` Jean-Philippe Brucker
2019-01-16 18:33           ` Auger Eric
2019-01-15 21:27       ` Auger Eric
2019-01-16 16:54         ` Jean-Philippe Brucker
2019-01-08 10:26 ` [RFC v3 15/21] driver core: add per device iommu param Eric Auger
2019-01-08 10:26 ` [RFC v3 16/21] iommu: introduce device fault report API Eric Auger
2019-01-08 10:26 ` [RFC v3 17/21] iommu/smmuv3: Report non recoverable faults Eric Auger
2019-01-11 17:46   ` Jean-Philippe Brucker
2019-01-15 21:06     ` Auger Eric
2019-01-16 12:25       ` Jean-Philippe Brucker
2019-01-16 12:49         ` Auger Eric
2019-01-08 10:26 ` [RFC v3 18/21] vfio-pci: Add a new VFIO_REGION_TYPE_NESTED region type Eric Auger
2019-01-11 23:58   ` Alex Williamson
2019-01-14 20:48     ` Auger Eric
2019-01-14 23:04       ` Alex Williamson
2019-01-15 21:56         ` Auger Eric
2019-01-08 10:26 ` [RFC v3 19/21] vfio-pci: Register an iommu fault handler Eric Auger
2019-01-08 10:26 ` [RFC v3 20/21] vfio-pci: Add VFIO_PCI_DMA_FAULT_IRQ_INDEX Eric Auger
2019-01-08 10:26 ` [RFC v3 21/21] vfio: Document nested stage control Eric Auger
2019-01-18 10:02 ` [RFC v3 00/21] SMMUv3 Nested Stage Setup Auger Eric

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190114143208.66eac25a@jacob-builder \
    --to=jacob.jun.pan@linux.intel.com \
    --cc=Christoffer.Dall@arm.com \
    --cc=Marc.Zyngier@arm.com \
    --cc=Robin.Murphy@arm.com \
    --cc=Will.Deacon@arm.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=eric.auger.pro@gmail.com \
    --cc=eric.auger@redhat.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe.brucker@arm.com \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peter.maydell@linaro.org \
    --cc=yi.l.liu@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).