* [RESEND v2] Bluetooth: hci_qca: Add helper to set device address
@ 2019-01-16 12:31 Balakrishna Godavarthi
2019-01-18 9:10 ` Marcel Holtmann
0 siblings, 1 reply; 6+ messages in thread
From: Balakrishna Godavarthi @ 2019-01-16 12:31 UTC (permalink / raw)
To: marcel, johan.hedberg
Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm,
Balakrishna Godavarthi
This patch add qca_set_bdaddr() to set the device
address for latest Qualcomm Bluetooth chipset wcn3990 and above.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
drivers/bluetooth/btqca.c | 19 +++++++++++++++++++
drivers/bluetooth/btqca.h | 8 +++++++-
drivers/bluetooth/hci_qca.c | 5 ++++-
3 files changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index ec9e03a6b778..612268574fc7 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -391,6 +391,25 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
}
EXPORT_SYMBOL_GPL(qca_uart_setup);
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+ int err;
+
+ skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
+ HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
+ return err;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qca_set_bdaddr);
+
MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 0c01f375fe83..c72c56ea7480 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -20,6 +20,7 @@
#define EDL_PATCH_CMD_OPCODE (0xFC00)
#define EDL_NVM_ACCESS_OPCODE (0xFC0B)
+#define EDL_WRITE_BD_ADDR_OPCODE (0xFC14)
#define EDL_PATCH_CMD_LEN (1)
#define EDL_PATCH_VER_REQ_CMD (0x19)
#define EDL_PATCH_TLV_REQ_CMD (0x1E)
@@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
enum qca_btsoc_type soc_type, u32 soc_ver);
int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
-
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
#else
static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
@@ -159,4 +160,9 @@ static inline int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version)
return -EOPNOTSUPP;
}
+static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ return -EOPNOTSUPP;
+}
+
#endif
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index f036c8f98ea3..53ac5ade532b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1241,7 +1241,10 @@ static int qca_setup(struct hci_uart *hu)
}
/* Setup bdaddr */
- hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+ if (qcadev->btsoc_type == QCA_WCN3990)
+ hu->hdev->set_bdaddr = qca_set_bdaddr;
+ else
+ hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
return ret;
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [RESEND v2] Bluetooth: hci_qca: Add helper to set device address
2019-01-16 12:31 [RESEND v2] Bluetooth: hci_qca: Add helper to set device address Balakrishna Godavarthi
@ 2019-01-18 9:10 ` Marcel Holtmann
0 siblings, 0 replies; 6+ messages in thread
From: Marcel Holtmann @ 2019-01-18 9:10 UTC (permalink / raw)
To: Balakrishna Godavarthi
Cc: Johan Hedberg, mka, linux-kernel, linux-bluetooth, hemantg,
linux-arm-msm
Hi Balakrishna,
> This patch add qca_set_bdaddr() to set the device
> address for latest Qualcomm Bluetooth chipset wcn3990 and above.
>
> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> Tested-by: Matthias Kaehlcke <mka@chromium.org>
> ---
> drivers/bluetooth/btqca.c | 19 +++++++++++++++++++
> drivers/bluetooth/btqca.h | 8 +++++++-
> drivers/bluetooth/hci_qca.c | 5 ++++-
> 3 files changed, 30 insertions(+), 2 deletions(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 6+ messages in thread
* [RESEND, v2] Bluetooth: hci_qca: Add helper to set device address
@ 2018-12-28 12:07 Balakrishna Godavarthi
2019-01-07 14:46 ` Balakrishna Godavarthi
0 siblings, 1 reply; 6+ messages in thread
From: Balakrishna Godavarthi @ 2018-12-28 12:07 UTC (permalink / raw)
To: marcel, johan.hedberg
Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm,
Balakrishna Godavarthi
This patch add qca_set_bdaddr() to set the device
address for latest Qualcomm Bluetooth chipset wcn3990 and above.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
drivers/bluetooth/btqca.c | 19 +++++++++++++++++++
drivers/bluetooth/btqca.h | 8 +++++++-
drivers/bluetooth/hci_qca.c | 5 ++++-
3 files changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index ec9e03a6b778..612268574fc7 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -391,6 +391,25 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
}
EXPORT_SYMBOL_GPL(qca_uart_setup);
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+ int err;
+
+ skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
+ HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
+ return err;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qca_set_bdaddr);
+
MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 0c01f375fe83..c72c56ea7480 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -20,6 +20,7 @@
#define EDL_PATCH_CMD_OPCODE (0xFC00)
#define EDL_NVM_ACCESS_OPCODE (0xFC0B)
+#define EDL_WRITE_BD_ADDR_OPCODE (0xFC14)
#define EDL_PATCH_CMD_LEN (1)
#define EDL_PATCH_VER_REQ_CMD (0x19)
#define EDL_PATCH_TLV_REQ_CMD (0x1E)
@@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
enum qca_btsoc_type soc_type, u32 soc_ver);
int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
-
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
#else
static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
@@ -159,4 +160,9 @@ static inline int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version)
return -EOPNOTSUPP;
}
+static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ return -EOPNOTSUPP;
+}
+
#endif
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index f036c8f98ea3..53ac5ade532b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1241,7 +1241,10 @@ static int qca_setup(struct hci_uart *hu)
}
/* Setup bdaddr */
- hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+ if (qcadev->btsoc_type == QCA_WCN3990)
+ hu->hdev->set_bdaddr = qca_set_bdaddr;
+ else
+ hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
return ret;
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [RESEND, v2] Bluetooth: hci_qca: Add helper to set device address
2018-12-28 12:07 [RESEND, " Balakrishna Godavarthi
@ 2019-01-07 14:46 ` Balakrishna Godavarthi
0 siblings, 0 replies; 6+ messages in thread
From: Balakrishna Godavarthi @ 2019-01-07 14:46 UTC (permalink / raw)
To: marcel, johan.hedberg
Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm
Hi Marcel,
On 2018-12-28 17:37, Balakrishna Godavarthi wrote:
> This patch add qca_set_bdaddr() to set the device
> address for latest Qualcomm Bluetooth chipset wcn3990 and above.
>
> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> Tested-by: Matthias Kaehlcke <mka@chromium.org>
> ---
> drivers/bluetooth/btqca.c | 19 +++++++++++++++++++
> drivers/bluetooth/btqca.h | 8 +++++++-
> drivers/bluetooth/hci_qca.c | 5 ++++-
> 3 files changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index ec9e03a6b778..612268574fc7 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -391,6 +391,25 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
> baudrate,
> }
> EXPORT_SYMBOL_GPL(qca_uart_setup);
>
> +int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> +{
> + struct sk_buff *skb;
> + int err;
> +
> + skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
> + HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
> + if (IS_ERR(skb)) {
> + err = PTR_ERR(skb);
> + bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
> + return err;
> + }
> +
> + kfree_skb(skb);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(qca_set_bdaddr);
> +
> MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
> MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver
> " VERSION);
> MODULE_VERSION(VERSION);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index 0c01f375fe83..c72c56ea7480 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -20,6 +20,7 @@
>
> #define EDL_PATCH_CMD_OPCODE (0xFC00)
> #define EDL_NVM_ACCESS_OPCODE (0xFC0B)
> +#define EDL_WRITE_BD_ADDR_OPCODE (0xFC14)
> #define EDL_PATCH_CMD_LEN (1)
> #define EDL_PATCH_VER_REQ_CMD (0x19)
> #define EDL_PATCH_TLV_REQ_CMD (0x1E)
> @@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev,
> const bdaddr_t *bdaddr);
> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> enum qca_btsoc_type soc_type, u32 soc_ver);
> int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
> -
> +int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
> #else
>
> static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const
> bdaddr_t *bdaddr)
> @@ -159,4 +160,9 @@ static inline int qca_read_soc_version(struct
> hci_dev *hdev, u32 *soc_version)
> return -EOPNOTSUPP;
> }
>
> +static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t
> *bdaddr)
> +{
> + return -EOPNOTSUPP;
> +}
> +
> #endif
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index f036c8f98ea3..53ac5ade532b 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1241,7 +1241,10 @@ static int qca_setup(struct hci_uart *hu)
> }
>
> /* Setup bdaddr */
> - hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
> + if (qcadev->btsoc_type == QCA_WCN3990)
> + hu->hdev->set_bdaddr = qca_set_bdaddr;
> + else
> + hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
>
> return ret;
> }
Can you pls review this change.
--
Regards
Balakrishna.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [RESEND v2] Bluetooth: hci_qca: Add helper to set device address
@ 2018-12-11 15:34 Balakrishna Godavarthi
0 siblings, 0 replies; 6+ messages in thread
From: Balakrishna Godavarthi @ 2018-12-11 15:34 UTC (permalink / raw)
To: marcel, johan.hedberg
Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm,
Balakrishna Godavarthi
This patch add qca_set_bdaddr() to set the device
address for latest Qualcomm Bluetooth chipset wcn3990 and above.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
drivers/bluetooth/btqca.c | 19 +++++++++++++++++++
drivers/bluetooth/btqca.h | 8 +++++++-
drivers/bluetooth/hci_qca.c | 5 ++++-
3 files changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index ec9e03a6b778..612268574fc7 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -391,6 +391,25 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
}
EXPORT_SYMBOL_GPL(qca_uart_setup);
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+ int err;
+
+ skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
+ HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
+ return err;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qca_set_bdaddr);
+
MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 0c01f375fe83..c72c56ea7480 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -20,6 +20,7 @@
#define EDL_PATCH_CMD_OPCODE (0xFC00)
#define EDL_NVM_ACCESS_OPCODE (0xFC0B)
+#define EDL_WRITE_BD_ADDR_OPCODE (0xFC14)
#define EDL_PATCH_CMD_LEN (1)
#define EDL_PATCH_VER_REQ_CMD (0x19)
#define EDL_PATCH_TLV_REQ_CMD (0x1E)
@@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
enum qca_btsoc_type soc_type, u32 soc_ver);
int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
-
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
#else
static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
@@ -159,4 +160,9 @@ static inline int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version)
return -EOPNOTSUPP;
}
+static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ return -EOPNOTSUPP;
+}
+
#endif
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index f036c8f98ea3..53ac5ade532b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1241,7 +1241,10 @@ static int qca_setup(struct hci_uart *hu)
}
/* Setup bdaddr */
- hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+ if (qcadev->btsoc_type == QCA_WCN3990)
+ hu->hdev->set_bdaddr = qca_set_bdaddr;
+ else
+ hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
return ret;
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread* [RESEND v2] Bluetooth: hci_qca: Add helper to set device address.
@ 2018-11-14 12:34 Balakrishna Godavarthi
0 siblings, 0 replies; 6+ messages in thread
From: Balakrishna Godavarthi @ 2018-11-14 12:34 UTC (permalink / raw)
To: marcel, johan.hedberg
Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm,
Balakrishna Godavarthi
This patch add qca_set_bdaddr() to set the device
address for latest Qualcomm Bluetooth chipset wcn3990 and above.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
drivers/bluetooth/btqca.c | 19 +++++++++++++++++++
drivers/bluetooth/btqca.h | 8 +++++++-
drivers/bluetooth/hci_qca.c | 5 ++++-
3 files changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index ec9e03a6b778..612268574fc7 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -391,6 +391,25 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
}
EXPORT_SYMBOL_GPL(qca_uart_setup);
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+ int err;
+
+ skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
+ HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
+ return err;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qca_set_bdaddr);
+
MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 0c01f375fe83..c72c56ea7480 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -20,6 +20,7 @@
#define EDL_PATCH_CMD_OPCODE (0xFC00)
#define EDL_NVM_ACCESS_OPCODE (0xFC0B)
+#define EDL_WRITE_BD_ADDR_OPCODE (0xFC14)
#define EDL_PATCH_CMD_LEN (1)
#define EDL_PATCH_VER_REQ_CMD (0x19)
#define EDL_PATCH_TLV_REQ_CMD (0x1E)
@@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
enum qca_btsoc_type soc_type, u32 soc_ver);
int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
-
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
#else
static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
@@ -159,4 +160,9 @@ static inline int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version)
return -EOPNOTSUPP;
}
+static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ return -EOPNOTSUPP;
+}
+
#endif
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index f036c8f98ea3..53ac5ade532b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1241,7 +1241,10 @@ static int qca_setup(struct hci_uart *hu)
}
/* Setup bdaddr */
- hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+ if (qcadev->btsoc_type == QCA_WCN3990)
+ hu->hdev->set_bdaddr = qca_set_bdaddr;
+ else
+ hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
return ret;
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-01-18 9:10 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-16 12:31 [RESEND v2] Bluetooth: hci_qca: Add helper to set device address Balakrishna Godavarthi
2019-01-18 9:10 ` Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2018-12-28 12:07 [RESEND, " Balakrishna Godavarthi
2019-01-07 14:46 ` Balakrishna Godavarthi
2018-12-11 15:34 [RESEND " Balakrishna Godavarthi
2018-11-14 12:34 Balakrishna Godavarthi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).