[PATCH v25 0/6] Add io{read|write}64 to io-64-atomic headers

[PATCH v25 0/6] Add io{read|write}64 to io-64-atomic headers

[Logan Gunthorpe]

This is resend number 6 since the last change to this series.

This cleanup was requested by Greg KH back in June of 2017. I've resent the series
a couple times a cycle since then, updating and fixing as feedback was slowly
recieved some patches were alread accepted by specific arches. In June 2018,
Andrew picked the remainder of this up and it was in linux-next for a
couple weeks. There were a couple problems that were identified and addressed
back then and I'd really like to get the ball rolling again. A year
and a half of sending this without much feedback is far too long.

@Andrew, can you please pick this set up again so it can get into
linux-next? Or let me know if there's something else I should be doing.

Thanks,

Logan

--

Changes since v24:
- Rebased onto v5.0-rc2 (No Changes)

Changes since v23:
- Rebased onto v4.20-rc4 (No Changes)

Changes since v22:
- Rebased onto v4.20-rc1 (No Changes)

Changes since v21:
- Rebased onto v4.19-rc6 (No Changes)

Changes since v20:
- Rebased onto v4.19-rc3 (No Changes)

Changes since v19:
- Rebased onto v4.19-rc1 (No Changes)

Changes since v18:
- Dropped the CAAM patch as it was subtly wrong and broke when people
  tested it in linux-next. Seeing the code is much trickier than it
  appears, we'll leave it to its maintainers to clean it up,
  should they chose.
- Restored the ioread64/iowrite64 extern prototypes as despite
  appearing to be unusued, they are in fact used in a rare corner case
  by the caam driver on 64bit powerpc. This was reported by Guenter testing
  on linux-next.
- Rebased onto v4.18-rc4 (No Changes)

Changes since v17:
- Rebased onto v4.18-rc1 (No Changes)

Changes since v16:
- Rebased onto v4.17-rc4 (No Changes)

Changes since v15:
- Rebased onto v4.17-rc1, dropping the powerpc patches which were
  picked up by Michael

Changes since v14:
- Rebased onto v4.16-rc7
- Replace the first two patches so that instead of correcting the
  endianness annotations we change to using writeX() and readX() with
  swabX() calls. This makes the big-endian functions more symmetric
  with the little-endian versions (with respect to barriers that are
  not included in the raw functions). As a side effect, it also fixes
  the kbuild warnings that the first two patches tried to address.

Changes since v13:
- Changed the subject of patch 0001 to correct a nit pointed out by Luc

Changes since v12:
- Rebased onto v4.16-rc6
- Split patch 0001 into two and reworked the commit log as requested
  by Luc Van Oostenryck

Changes since v11:
- Rebased onto v4.16-rc5
- Added a patch (0001) to fix some old and new sparse warnings
  that the kbuild robot warned about this cycle. The latest version
  of sparse was required to reproduce these.
- Added a patch (0002) to add io{read|write}64 to parisc which the kbuild
  robot also found errors for this cycle

Changes since v10:
- Rebased onto v4.16-rc4, this droped the drm/tilcdc patch which was
  picked up by that tree and is already in 4.16.

Changes since v9:
- Rebased onto v4.15-rc6
- Fixed a couple of issues in the new version of the CAAM patch as
  pointed out by Horia

Changes since v8:
- Rebased onto v4.15-rc2, as a result rewrote patch 7 seeing someone did
  some similar cleanup in that area.
- Added a patch to clean up the Switchtec NTB driver which landed in
  v4.15-rc1

Changes since v7:
- Fix minor nits from Andy Shevchenko
- Rebased onto v4.14-rc1

Changes since v6:
 ** none **

Changes since v5:
- Added a fix to the tilcdc driver to ensure it doesn't use the
  non-atomic operation. (This includes adding io{read|write}64[be]_is_nonatomic
  defines).

Changes since v4:
- Add functions so the powerpc implementation of iomap.c compiles. (As
  noticed by Horia)

Changes since v3:

- I noticed powerpc didn't use the appropriate functions seeing
  readq/writeq were not defined when iomap.h was included. Thus I've
  included a patch to adjust this
- Fixed some mistakes with a couple of the defines in io-64-nonatomic*
  headers
- Fixed a typo noticed by Horia.

(earlier versions were drastically different)


--

Logan Gunthorpe (6):
  iomap: Use non-raw io functions for io{read|write}XXbe
  parisc: iomap: introduce io{read|write}64
  iomap: introduce io{read|write}64_{lo_hi|hi_lo}
  io-64-nonatomic: add io{read|write}64[be]{_lo_hi|_hi_lo} macros
  ntb: ntb_hw_intel: use io-64-nonatomic instead of in-driver hacks
  ntb: ntb_hw_switchtec: Cleanup 64bit IO defines to use the common
    header

 arch/parisc/include/asm/io.h           |   9 ++
 arch/parisc/lib/iomap.c                |  64 +++++++++++
 arch/powerpc/include/asm/io.h          |   2 +
 drivers/ntb/hw/intel/ntb_hw_intel.h    |  30 +-----
 drivers/ntb/hw/mscc/ntb_hw_switchtec.c |  36 +------
 include/asm-generic/iomap.h            |  22 ++++
 include/linux/io-64-nonatomic-hi-lo.h  |  64 +++++++++++
 include/linux/io-64-nonatomic-lo-hi.h  |  64 +++++++++++
 lib/iomap.c                            | 140 ++++++++++++++++++++++++-
 9 files changed, 366 insertions(+), 65 deletions(-)

--
2.19.0

[PATCH v25 1/6] iomap: Use non-raw io functions for io{read|write}XXbe

[Logan Gunthorpe]

Fix an asymmetry in the io{read|write}XXbe functions in that the
big-endian variants make use of the raw io accessors while the
little-endian variants use the regular accessors. Some architectures
implement barriers to order against both spinlocks and DMA accesses
and for these case, the big-endian variant of the API would not be
protected.

Thus, change the mmio_XXXXbe macros to use the appropriate swab() function
wrapping the regular accessor. This is similar to what was done for PIO.

When this code was originally written, barriers in the IO accessors were
not common and the accessors simply wrapped the raw functions in a
conversion to CPU endianness. Since then, barriers have been added in
some architectures and are now missing in the big endian variant of the
API.

This also manages to silence a few sparse warnings that check
for using the correct endian types which the original code did
not annotate correctly.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/CAK8P3a25zQDxyaY3iVv+JmSSzs7F6ssGc+HdBkGs54ZfViX+Fg@mail.gmail.com
---
 lib/iomap.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/lib/iomap.c b/lib/iomap.c
index 541d926da95e..2c293b22569f 100644
--- a/lib/iomap.c
+++ b/lib/iomap.c
@@ -65,8 +65,8 @@ static void bad_io_access(unsigned long port, const char *access)
 #endif
 
 #ifndef mmio_read16be
-#define mmio_read16be(addr) be16_to_cpu(__raw_readw(addr))
-#define mmio_read32be(addr) be32_to_cpu(__raw_readl(addr))
+#define mmio_read16be(addr) swab16(readw(addr))
+#define mmio_read32be(addr) swab32(readl(addr))
 #endif
 
 unsigned int ioread8(void __iomem *addr)
@@ -106,8 +106,8 @@ EXPORT_SYMBOL(ioread32be);
 #endif
 
 #ifndef mmio_write16be
-#define mmio_write16be(val,port) __raw_writew(be16_to_cpu(val),port)
-#define mmio_write32be(val,port) __raw_writel(be32_to_cpu(val),port)
+#define mmio_write16be(val,port) writew(swab16(val),port)
+#define mmio_write32be(val,port) writel(swab32(val),port)
 #endif
 
 void iowrite8(u8 val, void __iomem *addr)
-- 
2.19.0

[PATCH v25 2/6] parisc: iomap: introduce io{read|write}64

[Logan Gunthorpe]

Add support for io{read|write}64() functions in parisc architecture.
These are pretty straightforward copies of similar functions which
make use of readq and writeq.

Also, indicate that the lo_hi and hi_lo variants of these functions
are not provided by this architecture.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 arch/parisc/include/asm/io.h |  9 +++++
 arch/parisc/lib/iomap.c      | 64 ++++++++++++++++++++++++++++++++++++
 2 files changed, 73 insertions(+)

diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h
index afe493b23d04..30a8315d5c07 100644
--- a/arch/parisc/include/asm/io.h
+++ b/arch/parisc/include/asm/io.h
@@ -311,6 +311,15 @@ extern void outsl (unsigned long port, const void *src, unsigned long count);
  * value for either 32 or 64 bit mode */
 #define F_EXTEND(x) ((unsigned long)((x) | (0xffffffff00000000ULL)))
 
+#define ioread64 ioread64
+#define ioread64be ioread64be
+#define iowrite64 iowrite64
+#define iowrite64be iowrite64be
+extern u64 ioread64(void __iomem *addr);
+extern u64 ioread64be(void __iomem *addr);
+extern void iowrite64(u64 val, void __iomem *addr);
+extern void iowrite64be(u64 val, void __iomem *addr);
+
 #include <asm-generic/iomap.h>
 
 /*
diff --git a/arch/parisc/lib/iomap.c b/arch/parisc/lib/iomap.c
index 4b19e6e64fb7..0195aec657e2 100644
--- a/arch/parisc/lib/iomap.c
+++ b/arch/parisc/lib/iomap.c
@@ -48,11 +48,15 @@ struct iomap_ops {
 	unsigned int (*read16be)(void __iomem *);
 	unsigned int (*read32)(void __iomem *);
 	unsigned int (*read32be)(void __iomem *);
+	u64 (*read64)(void __iomem *);
+	u64 (*read64be)(void __iomem *);
 	void (*write8)(u8, void __iomem *);
 	void (*write16)(u16, void __iomem *);
 	void (*write16be)(u16, void __iomem *);
 	void (*write32)(u32, void __iomem *);
 	void (*write32be)(u32, void __iomem *);
+	void (*write64)(u64, void __iomem *);
+	void (*write64be)(u64, void __iomem *);
 	void (*read8r)(void __iomem *, void *, unsigned long);
 	void (*read16r)(void __iomem *, void *, unsigned long);
 	void (*read32r)(void __iomem *, void *, unsigned long);
@@ -171,6 +175,16 @@ static unsigned int iomem_read32be(void __iomem *addr)
 	return __raw_readl(addr);
 }
 
+static u64 iomem_read64(void __iomem *addr)
+{
+	return readq(addr);
+}
+
+static u64 iomem_read64be(void __iomem *addr)
+{
+	return __raw_readq(addr);
+}
+
 static void iomem_write8(u8 datum, void __iomem *addr)
 {
 	writeb(datum, addr);
@@ -196,6 +210,16 @@ static void iomem_write32be(u32 datum, void __iomem *addr)
 	__raw_writel(datum, addr);
 }
 
+static void iomem_write64(u64 datum, void __iomem *addr)
+{
+	writel(datum, addr);
+}
+
+static void iomem_write64be(u64 datum, void __iomem *addr)
+{
+	__raw_writel(datum, addr);
+}
+
 static void iomem_read8r(void __iomem *addr, void *dst, unsigned long count)
 {
 	while (count--) {
@@ -250,11 +274,15 @@ static const struct iomap_ops iomem_ops = {
 	.read16be = iomem_read16be,
 	.read32 = iomem_read32,
 	.read32be = iomem_read32be,
+	.read64 = iomem_read64,
+	.read64be = iomem_read64be,
 	.write8 = iomem_write8,
 	.write16 = iomem_write16,
 	.write16be = iomem_write16be,
 	.write32 = iomem_write32,
 	.write32be = iomem_write32be,
+	.write64 = iomem_write64,
+	.write64be = iomem_write64be,
 	.read8r = iomem_read8r,
 	.read16r = iomem_read16r,
 	.read32r = iomem_read32r,
@@ -304,6 +332,20 @@ unsigned int ioread32be(void __iomem *addr)
 	return *((u32 *)addr);
 }
 
+u64 ioread64(void __iomem *addr)
+{
+	if (unlikely(INDIRECT_ADDR(addr)))
+		return iomap_ops[ADDR_TO_REGION(addr)]->read64(addr);
+	return le64_to_cpup((u64 *)addr);
+}
+
+u64 ioread64be(void __iomem *addr)
+{
+	if (unlikely(INDIRECT_ADDR(addr)))
+		return iomap_ops[ADDR_TO_REGION(addr)]->read64be(addr);
+	return *((u64 *)addr);
+}
+
 void iowrite8(u8 datum, void __iomem *addr)
 {
 	if (unlikely(INDIRECT_ADDR(addr))) {
@@ -349,6 +391,24 @@ void iowrite32be(u32 datum, void __iomem *addr)
 	}
 }
 
+void iowrite64(u64 datum, void __iomem *addr)
+{
+	if (unlikely(INDIRECT_ADDR(addr))) {
+		iomap_ops[ADDR_TO_REGION(addr)]->write64(datum, addr);
+	} else {
+		*((u64 *)addr) = cpu_to_le64(datum);
+	}
+}
+
+void iowrite64be(u64 datum, void __iomem *addr)
+{
+	if (unlikely(INDIRECT_ADDR(addr))) {
+		iomap_ops[ADDR_TO_REGION(addr)]->write64be(datum, addr);
+	} else {
+		*((u64 *)addr) = datum;
+	}
+}
+
 /* Repeating interfaces */
 
 void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
@@ -449,11 +509,15 @@ EXPORT_SYMBOL(ioread16);
 EXPORT_SYMBOL(ioread16be);
 EXPORT_SYMBOL(ioread32);
 EXPORT_SYMBOL(ioread32be);
+EXPORT_SYMBOL(ioread64);
+EXPORT_SYMBOL(ioread64be);
 EXPORT_SYMBOL(iowrite8);
 EXPORT_SYMBOL(iowrite16);
 EXPORT_SYMBOL(iowrite16be);
 EXPORT_SYMBOL(iowrite32);
 EXPORT_SYMBOL(iowrite32be);
+EXPORT_SYMBOL(iowrite64);
+EXPORT_SYMBOL(iowrite64be);
 EXPORT_SYMBOL(ioread8_rep);
 EXPORT_SYMBOL(ioread16_rep);
 EXPORT_SYMBOL(ioread32_rep);
-- 
2.19.0

[PATCH v25 3/6] iomap: introduce io{read|write}64_{lo_hi|hi_lo}

[Logan Gunthorpe]

In order to provide non-atomic functions for io{read|write}64 that will
use readq and writeq when appropriate. We define a number of variants
of these functions in the generic iomap that will do non-atomic
operations on pio but atomic operations on mmio.

These functions are only defined if readq and writeq are defined. If
they are not, then the wrappers that always use non-atomic operations
from include/linux/io-64-nonatomic*.h will be used.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Suresh Warrier <warrier@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/include/asm/io.h |   2 +
 include/asm-generic/iomap.h   |  22 ++++++
 lib/iomap.c                   | 132 ++++++++++++++++++++++++++++++++++
 3 files changed, 156 insertions(+)

diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 7f19fbd3ba55..4b73847e9b95 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -783,8 +783,10 @@ extern void __iounmap_at(void *ea, unsigned long size);
 
 #define mmio_read16be(addr)		readw_be(addr)
 #define mmio_read32be(addr)		readl_be(addr)
+#define mmio_read64be(addr)		readq_be(addr)
 #define mmio_write16be(val, addr)	writew_be(val, addr)
 #define mmio_write32be(val, addr)	writel_be(val, addr)
+#define mmio_write64be(val, addr)	writeq_be(val, addr)
 #define mmio_insb(addr, dst, count)	readsb(addr, dst, count)
 #define mmio_insw(addr, dst, count)	readsw(addr, dst, count)
 #define mmio_insl(addr, dst, count)	readsl(addr, dst, count)
diff --git a/include/asm-generic/iomap.h b/include/asm-generic/iomap.h
index 5b63b94ef6b5..a008f504a2d0 100644
--- a/include/asm-generic/iomap.h
+++ b/include/asm-generic/iomap.h
@@ -36,6 +36,17 @@ extern u64 ioread64(void __iomem *);
 extern u64 ioread64be(void __iomem *);
 #endif
 
+#ifdef readq
+#define ioread64_lo_hi ioread64_lo_hi
+#define ioread64_hi_lo ioread64_hi_lo
+#define ioread64be_lo_hi ioread64be_lo_hi
+#define ioread64be_hi_lo ioread64be_hi_lo
+extern u64 ioread64_lo_hi(void __iomem *addr);
+extern u64 ioread64_hi_lo(void __iomem *addr);
+extern u64 ioread64be_lo_hi(void __iomem *addr);
+extern u64 ioread64be_hi_lo(void __iomem *addr);
+#endif
+
 extern void iowrite8(u8, void __iomem *);
 extern void iowrite16(u16, void __iomem *);
 extern void iowrite16be(u16, void __iomem *);
@@ -46,6 +57,17 @@ extern void iowrite64(u64, void __iomem *);
 extern void iowrite64be(u64, void __iomem *);
 #endif
 
+#ifdef writeq
+#define iowrite64_lo_hi iowrite64_lo_hi
+#define iowrite64_hi_lo iowrite64_hi_lo
+#define iowrite64be_lo_hi iowrite64be_lo_hi
+#define iowrite64be_hi_lo iowrite64be_hi_lo
+extern void iowrite64_lo_hi(u64 val, void __iomem *addr);
+extern void iowrite64_hi_lo(u64 val, void __iomem *addr);
+extern void iowrite64be_lo_hi(u64 val, void __iomem *addr);
+extern void iowrite64be_hi_lo(u64 val, void __iomem *addr);
+#endif
+
 /*
  * "string" versions of the above. Note that they
  * use native byte ordering for the accesses (on
diff --git a/lib/iomap.c b/lib/iomap.c
index 2c293b22569f..e909ab71e995 100644
--- a/lib/iomap.c
+++ b/lib/iomap.c
@@ -67,6 +67,7 @@ static void bad_io_access(unsigned long port, const char *access)
 #ifndef mmio_read16be
 #define mmio_read16be(addr) swab16(readw(addr))
 #define mmio_read32be(addr) swab32(readl(addr))
+#define mmio_read64be(addr) swab64(readq(addr))
 #endif
 
 unsigned int ioread8(void __iomem *addr)
@@ -100,6 +101,80 @@ EXPORT_SYMBOL(ioread16be);
 EXPORT_SYMBOL(ioread32);
 EXPORT_SYMBOL(ioread32be);
 
+#ifdef readq
+static u64 pio_read64_lo_hi(unsigned long port)
+{
+	u64 lo, hi;
+
+	lo = inl(port);
+	hi = inl(port + sizeof(u32));
+
+	return lo | (hi << 32);
+}
+
+static u64 pio_read64_hi_lo(unsigned long port)
+{
+	u64 lo, hi;
+
+	hi = inl(port + sizeof(u32));
+	lo = inl(port);
+
+	return lo | (hi << 32);
+}
+
+static u64 pio_read64be_lo_hi(unsigned long port)
+{
+	u64 lo, hi;
+
+	lo = pio_read32be(port + sizeof(u32));
+	hi = pio_read32be(port);
+
+	return lo | (hi << 32);
+}
+
+static u64 pio_read64be_hi_lo(unsigned long port)
+{
+	u64 lo, hi;
+
+	hi = pio_read32be(port);
+	lo = pio_read32be(port + sizeof(u32));
+
+	return lo | (hi << 32);
+}
+
+u64 ioread64_lo_hi(void __iomem *addr)
+{
+	IO_COND(addr, return pio_read64_lo_hi(port), return readq(addr));
+	return 0xffffffffffffffffULL;
+}
+
+u64 ioread64_hi_lo(void __iomem *addr)
+{
+	IO_COND(addr, return pio_read64_hi_lo(port), return readq(addr));
+	return 0xffffffffffffffffULL;
+}
+
+u64 ioread64be_lo_hi(void __iomem *addr)
+{
+	IO_COND(addr, return pio_read64be_lo_hi(port),
+		return mmio_read64be(addr));
+	return 0xffffffffffffffffULL;
+}
+
+u64 ioread64be_hi_lo(void __iomem *addr)
+{
+	IO_COND(addr, return pio_read64be_hi_lo(port),
+		return mmio_read64be(addr));
+	return 0xffffffffffffffffULL;
+}
+
+EXPORT_SYMBOL(ioread64_lo_hi);
+EXPORT_SYMBOL(ioread64_hi_lo);
+EXPORT_SYMBOL(ioread64be_lo_hi);
+EXPORT_SYMBOL(ioread64be_hi_lo);
+
+#endif /* readq */
+
 #ifndef pio_write16be
 #define pio_write16be(val,port) outw(swab16(val),port)
 #define pio_write32be(val,port) outl(swab32(val),port)
@@ -108,6 +183,7 @@ EXPORT_SYMBOL(ioread32be);
 #ifndef mmio_write16be
 #define mmio_write16be(val,port) writew(swab16(val),port)
 #define mmio_write32be(val,port) writel(swab32(val),port)
+#define mmio_write64be(val,port) writeq(swab64(val),port)
 #endif
 
 void iowrite8(u8 val, void __iomem *addr)
@@ -136,6 +212,62 @@ EXPORT_SYMBOL(iowrite16be);
 EXPORT_SYMBOL(iowrite32);
 EXPORT_SYMBOL(iowrite32be);
 
+#ifdef writeq
+static void pio_write64_lo_hi(u64 val, unsigned long port)
+{
+	outl(val, port);
+	outl(val >> 32, port + sizeof(u32));
+}
+
+static void pio_write64_hi_lo(u64 val, unsigned long port)
+{
+	outl(val >> 32, port + sizeof(u32));
+	outl(val, port);
+}
+
+static void pio_write64be_lo_hi(u64 val, unsigned long port)
+{
+	pio_write32be(val, port + sizeof(u32));
+	pio_write32be(val >> 32, port);
+}
+
+static void pio_write64be_hi_lo(u64 val, unsigned long port)
+{
+	pio_write32be(val >> 32, port);
+	pio_write32be(val, port + sizeof(u32));
+}
+
+void iowrite64_lo_hi(u64 val, void __iomem *addr)
+{
+	IO_COND(addr, pio_write64_lo_hi(val, port),
+		writeq(val, addr));
+}
+
+void iowrite64_hi_lo(u64 val, void __iomem *addr)
+{
+	IO_COND(addr, pio_write64_hi_lo(val, port),
+		writeq(val, addr));
+}
+
+void iowrite64be_lo_hi(u64 val, void __iomem *addr)
+{
+	IO_COND(addr, pio_write64be_lo_hi(val, port),
+		mmio_write64be(val, addr));
+}
+
+void iowrite64be_hi_lo(u64 val, void __iomem *addr)
+{
+	IO_COND(addr, pio_write64be_hi_lo(val, port),
+		mmio_write64be(val, addr));
+}
+
+EXPORT_SYMBOL(iowrite64_lo_hi);
+EXPORT_SYMBOL(iowrite64_hi_lo);
+EXPORT_SYMBOL(iowrite64be_lo_hi);
+EXPORT_SYMBOL(iowrite64be_hi_lo);
+
+#endif /* readq */
+
 /*
  * These are the "repeat MMIO read/write" functions.
  * Note the "__raw" accesses, since we don't want to
-- 
2.19.0

[PATCH v25 4/6] io-64-nonatomic: add io{read|write}64[be]{_lo_hi|_hi_lo} macros

[Logan Gunthorpe]

This patch adds generic io{read|write}64[be]{_lo_hi|_hi_lo} macros if
they are not already defined by the architecture. (As they are provided
by the generic iomap library).

The patch also points io{read|write}64[be] to the variant specified by the
header name.

This is because new drivers are encouraged to use ioreadXX, et al instead
of readX[1], et al -- and mixing ioreadXX with readq is pretty ugly.

[1] LDD3: section 9.4.2

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/io-64-nonatomic-hi-lo.h | 64 +++++++++++++++++++++++++++
 include/linux/io-64-nonatomic-lo-hi.h | 64 +++++++++++++++++++++++++++
 2 files changed, 128 insertions(+)

diff --git a/include/linux/io-64-nonatomic-hi-lo.h b/include/linux/io-64-nonatomic-hi-lo.h
index 862d786a904f..ae21b72cce85 100644
--- a/include/linux/io-64-nonatomic-hi-lo.h
+++ b/include/linux/io-64-nonatomic-hi-lo.h
@@ -55,4 +55,68 @@ static inline void hi_lo_writeq_relaxed(__u64 val, volatile void __iomem *addr)
 #define writeq_relaxed hi_lo_writeq_relaxed
 #endif
 
+#ifndef ioread64_hi_lo
+#define ioread64_hi_lo ioread64_hi_lo
+static inline u64 ioread64_hi_lo(void __iomem *addr)
+{
+	u32 low, high;
+
+	high = ioread32(addr + sizeof(u32));
+	low = ioread32(addr);
+
+	return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef iowrite64_hi_lo
+#define iowrite64_hi_lo iowrite64_hi_lo
+static inline void iowrite64_hi_lo(u64 val, void __iomem *addr)
+{
+	iowrite32(val >> 32, addr + sizeof(u32));
+	iowrite32(val, addr);
+}
+#endif
+
+#ifndef ioread64be_hi_lo
+#define ioread64be_hi_lo ioread64be_hi_lo
+static inline u64 ioread64be_hi_lo(void __iomem *addr)
+{
+	u32 low, high;
+
+	high = ioread32be(addr);
+	low = ioread32be(addr + sizeof(u32));
+
+	return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef iowrite64be_hi_lo
+#define iowrite64be_hi_lo iowrite64be_hi_lo
+static inline void iowrite64be_hi_lo(u64 val, void __iomem *addr)
+{
+	iowrite32be(val >> 32, addr);
+	iowrite32be(val, addr + sizeof(u32));
+}
+#endif
+
+#ifndef ioread64
+#define ioread64_is_nonatomic
+#define ioread64 ioread64_hi_lo
+#endif
+
+#ifndef iowrite64
+#define iowrite64_is_nonatomic
+#define iowrite64 iowrite64_hi_lo
+#endif
+
+#ifndef ioread64be
+#define ioread64be_is_nonatomic
+#define ioread64be ioread64be_hi_lo
+#endif
+
+#ifndef iowrite64be
+#define iowrite64be_is_nonatomic
+#define iowrite64be iowrite64be_hi_lo
+#endif
+
 #endif	/* _LINUX_IO_64_NONATOMIC_HI_LO_H_ */
diff --git a/include/linux/io-64-nonatomic-lo-hi.h b/include/linux/io-64-nonatomic-lo-hi.h
index d042e7bb5adb..faaa842dbdb9 100644
--- a/include/linux/io-64-nonatomic-lo-hi.h
+++ b/include/linux/io-64-nonatomic-lo-hi.h
@@ -55,4 +55,68 @@ static inline void lo_hi_writeq_relaxed(__u64 val, volatile void __iomem *addr)
 #define writeq_relaxed lo_hi_writeq_relaxed
 #endif
 
+#ifndef ioread64_lo_hi
+#define ioread64_lo_hi ioread64_lo_hi
+static inline u64 ioread64_lo_hi(void __iomem *addr)
+{
+	u32 low, high;
+
+	low = ioread32(addr);
+	high = ioread32(addr + sizeof(u32));
+
+	return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef iowrite64_lo_hi
+#define iowrite64_lo_hi iowrite64_lo_hi
+static inline void iowrite64_lo_hi(u64 val, void __iomem *addr)
+{
+	iowrite32(val, addr);
+	iowrite32(val >> 32, addr + sizeof(u32));
+}
+#endif
+
+#ifndef ioread64be_lo_hi
+#define ioread64be_lo_hi ioread64be_lo_hi
+static inline u64 ioread64be_lo_hi(void __iomem *addr)
+{
+	u32 low, high;
+
+	low = ioread32be(addr + sizeof(u32));
+	high = ioread32be(addr);
+
+	return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef iowrite64be_lo_hi
+#define iowrite64be_lo_hi iowrite64be_lo_hi
+static inline void iowrite64be_lo_hi(u64 val, void __iomem *addr)
+{
+	iowrite32be(val, addr + sizeof(u32));
+	iowrite32be(val >> 32, addr);
+}
+#endif
+
+#ifndef ioread64
+#define ioread64_is_nonatomic
+#define ioread64 ioread64_lo_hi
+#endif
+
+#ifndef iowrite64
+#define iowrite64_is_nonatomic
+#define iowrite64 iowrite64_lo_hi
+#endif
+
+#ifndef ioread64be
+#define ioread64be_is_nonatomic
+#define ioread64be ioread64be_lo_hi
+#endif
+
+#ifndef iowrite64be
+#define iowrite64be_is_nonatomic
+#define iowrite64be iowrite64be_lo_hi
+#endif
+
 #endif	/* _LINUX_IO_64_NONATOMIC_LO_HI_H_ */
-- 
2.19.0

[PATCH v25 5/6] ntb: ntb_hw_intel: use io-64-nonatomic instead of in-driver hacks

[Logan Gunthorpe]

Now that ioread64 and iowrite64 are available in io-64-nonatomic,
we can remove the hack at the top of ntb_hw_intel.c and replace it
with an include.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Acked-by: Jon Mason <jdmason@kudzu.us>
---
 drivers/ntb/hw/intel/ntb_hw_intel.h | 30 +----------------------------
 1 file changed, 1 insertion(+), 29 deletions(-)

diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.h b/drivers/ntb/hw/intel/ntb_hw_intel.h
index c49ff8970ce3..e071e28bca3f 100644
--- a/drivers/ntb/hw/intel/ntb_hw_intel.h
+++ b/drivers/ntb/hw/intel/ntb_hw_intel.h
@@ -53,6 +53,7 @@
 
 #include <linux/ntb.h>
 #include <linux/pci.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 
 /* PCI device IDs */
 #define PCI_DEVICE_ID_INTEL_NTB_B2B_JSF	0x3725
@@ -218,33 +219,4 @@ static inline int pdev_is_gen3(struct pci_dev *pdev)
 	return 0;
 }
 
-#ifndef ioread64
-#ifdef readq
-#define ioread64 readq
-#else
-#define ioread64 _ioread64
-static inline u64 _ioread64(void __iomem *mmio)
-{
-	u64 low, high;
-
-	low = ioread32(mmio);
-	high = ioread32(mmio + sizeof(u32));
-	return low | (high << 32);
-}
-#endif
-#endif
-
-#ifndef iowrite64
-#ifdef writeq
-#define iowrite64 writeq
-#else
-#define iowrite64 _iowrite64
-static inline void _iowrite64(u64 val, void __iomem *mmio)
-{
-	iowrite32(val, mmio);
-	iowrite32(val >> 32, mmio + sizeof(u32));
-}
-#endif
-#endif
-
 #endif
-- 
2.19.0

[PATCH v25 6/6] ntb: ntb_hw_switchtec: Cleanup 64bit IO defines to use the common header

[Logan Gunthorpe]

Clean up the ifdefs which conditionally defined the io{read|write}64
functions in favour of the new common io-64-nonatomic-lo-hi header.

Per a nit from Andy Shevchenko, the include list is also made
alphabetical.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jon Mason <jdmason@kudzu.us>
---
 drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 36 +++-----------------------
 1 file changed, 4 insertions(+), 32 deletions(-)

diff --git a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
index f1eaa3c4d46a..f2df2d39c65b 100644
--- a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
+++ b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
@@ -13,13 +13,14 @@
  *
  */
 
-#include <linux/switchtec.h>
-#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
-#include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/ntb.h>
 #include <linux/pci.h>
+#include <linux/switchtec.h>
 
 MODULE_DESCRIPTION("Microsemi Switchtec(tm) NTB Driver");
 MODULE_VERSION("0.1");
@@ -36,35 +37,6 @@ module_param(use_lut_mws, bool, 0644);
 MODULE_PARM_DESC(use_lut_mws,
 		 "Enable the use of the LUT based memory windows");
 
-#ifndef ioread64
-#ifdef readq
-#define ioread64 readq
-#else
-#define ioread64 _ioread64
-static inline u64 _ioread64(void __iomem *mmio)
-{
-	u64 low, high;
-
-	low = ioread32(mmio);
-	high = ioread32(mmio + sizeof(u32));
-	return low | (high << 32);
-}
-#endif
-#endif
-
-#ifndef iowrite64
-#ifdef writeq
-#define iowrite64 writeq
-#else
-#define iowrite64 _iowrite64
-static inline void _iowrite64(u64 val, void __iomem *mmio)
-{
-	iowrite32(val, mmio);
-	iowrite32(val >> 32, mmio + sizeof(u32));
-}
-#endif
-#endif
-
 #define SWITCHTEC_NTB_MAGIC 0x45CC0001
 #define MAX_MWS     128
 
-- 
2.19.0

Re: [PATCH v25 0/6] Add io{read|write}64 to io-64-atomic headers

[Greg Kroah-Hartman]

On Wed, Jan 16, 2019 at 11:25:17AM -0700, Logan Gunthorpe wrote:
> This is resend number 6 since the last change to this series.
> 
> This cleanup was requested by Greg KH back in June of 2017. I've resent the series
> a couple times a cycle since then, updating and fixing as feedback was slowly
> recieved some patches were alread accepted by specific arches. In June 2018,
> Andrew picked the remainder of this up and it was in linux-next for a
> couple weeks. There were a couple problems that were identified and addressed
> back then and I'd really like to get the ball rolling again. A year
> and a half of sending this without much feedback is far too long.
> 
> @Andrew, can you please pick this set up again so it can get into
> linux-next? Or let me know if there's something else I should be doing.

version 25?  That's crazy, this has gone on too long.  I've taken this
into my char/misc driver tree now, so sorry for the long suffering you
have gone through for this.

Thanks for being persistent,

greg k-h

Re: [PATCH v25 0/6] Add io{read|write}64 to io-64-atomic headers

[Logan Gunthorpe]

On 2019-01-22 5:40 a.m., Greg Kroah-Hartman wrote:
> On Wed, Jan 16, 2019 at 11:25:17AM -0700, Logan Gunthorpe wrote:
>> This is resend number 6 since the last change to this series.
>>
>> This cleanup was requested by Greg KH back in June of 2017. I've resent the series
>> a couple times a cycle since then, updating and fixing as feedback was slowly
>> recieved some patches were alread accepted by specific arches. In June 2018,
>> Andrew picked the remainder of this up and it was in linux-next for a
>> couple weeks. There were a couple problems that were identified and addressed
>> back then and I'd really like to get the ball rolling again. A year
>> and a half of sending this without much feedback is far too long.
>>
>> @Andrew, can you please pick this set up again so it can get into
>> linux-next? Or let me know if there's something else I should be doing.
> 
> version 25?  That's crazy, this has gone on too long.  I've taken this
> into my char/misc driver tree now, so sorry for the long suffering you
> have gone through for this.

Thanks a lot!

Logan