From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: p.zabel@pengutronix.de
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
cphealy@gmail.com, l.stach@pengutronix.de,
Leonard Crestez <leonard.crestez@nxp.com>,
"A.s. Dong" <aisheng.dong@nxp.com>,
Richard Zhu <hongxing.zhu@nxp.com>, Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v5 3/3] reset: imx7: Add support for i.MX8MQ IP block variant
Date: Mon, 21 Jan 2019 18:10:43 -0800 [thread overview]
Message-ID: <20190122021043.25449-4-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190122021043.25449-1-andrew.smirnov@gmail.com>
Add bits and pieces needed to support IP block variant found on
i.MX8MQ SoCs.
Cc: p.zabel@pengutronix.de
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: cphealy@gmail.com
Cc: l.stach@pengutronix.de
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/reset/Kconfig | 4 +-
drivers/reset/reset-imx7.c | 122 +++++++++++++++++++++++++++++++++++++
2 files changed, 124 insertions(+), 2 deletions(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index c21da9fe51ec..add84b523be1 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -48,9 +48,9 @@ config RESET_HSDK
This enables the reset controller driver for HSDK board.
config RESET_IMX7
- bool "i.MX7 Reset Driver" if COMPILE_TEST
+ bool "i.MX7/8 Reset Driver" if COMPILE_TEST
depends on HAS_IOMEM
- default SOC_IMX7D
+ default SOC_IMX7D || (ARM64 && ARCH_MXC)
select MFD_SYSCON
help
This enables the reset controller driver for i.MX7 SoCs.
diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
index cb6e3bc4acc1..06a1036042e8 100644
--- a/drivers/reset/reset-imx7.c
+++ b/drivers/reset/reset-imx7.c
@@ -22,6 +22,7 @@
#include <linux/reset-controller.h>
#include <linux/regmap.h>
#include <dt-bindings/reset/imx7-reset.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
struct imx7_src_signal {
unsigned int offset, bit;
@@ -140,6 +141,126 @@ static const struct imx7_src_variant variant_imx7 = {
},
};
+enum imx8mq_src_registers {
+ SRC_A53RCR0 = 0x0004,
+ SRC_HDMI_RCR = 0x0030,
+ SRC_DISP_RCR = 0x0034,
+ SRC_GPU_RCR = 0x0040,
+ SRC_VPU_RCR = 0x0044,
+ SRC_PCIE2_RCR = 0x0048,
+ SRC_MIPIPHY1_RCR = 0x004c,
+ SRC_MIPIPHY2_RCR = 0x0050,
+ SRC_DDRC2_RCR = 0x1004,
+};
+
+static const struct imx7_src_signal imx8mq_src_signals[IMX8MQ_RESET_NUM] = {
+ [IMX8MQ_RESET_A53_CORE_POR_RESET0] = { SRC_A53RCR0, BIT(0) },
+ [IMX8MQ_RESET_A53_CORE_POR_RESET1] = { SRC_A53RCR0, BIT(1) },
+ [IMX8MQ_RESET_A53_CORE_POR_RESET2] = { SRC_A53RCR0, BIT(2) },
+ [IMX8MQ_RESET_A53_CORE_POR_RESET3] = { SRC_A53RCR0, BIT(3) },
+ [IMX8MQ_RESET_A53_CORE_RESET0] = { SRC_A53RCR0, BIT(4) },
+ [IMX8MQ_RESET_A53_CORE_RESET1] = { SRC_A53RCR0, BIT(5) },
+ [IMX8MQ_RESET_A53_CORE_RESET2] = { SRC_A53RCR0, BIT(6) },
+ [IMX8MQ_RESET_A53_CORE_RESET3] = { SRC_A53RCR0, BIT(7) },
+ [IMX8MQ_RESET_A53_DBG_RESET0] = { SRC_A53RCR0, BIT(8) },
+ [IMX8MQ_RESET_A53_DBG_RESET1] = { SRC_A53RCR0, BIT(9) },
+ [IMX8MQ_RESET_A53_DBG_RESET2] = { SRC_A53RCR0, BIT(10) },
+ [IMX8MQ_RESET_A53_DBG_RESET3] = { SRC_A53RCR0, BIT(11) },
+ [IMX8MQ_RESET_A53_ETM_RESET0] = { SRC_A53RCR0, BIT(12) },
+ [IMX8MQ_RESET_A53_ETM_RESET1] = { SRC_A53RCR0, BIT(13) },
+ [IMX8MQ_RESET_A53_ETM_RESET2] = { SRC_A53RCR0, BIT(14) },
+ [IMX8MQ_RESET_A53_ETM_RESET3] = { SRC_A53RCR0, BIT(15) },
+ [IMX8MQ_RESET_A53_SOC_DBG_RESET] = { SRC_A53RCR0, BIT(20) },
+ [IMX8MQ_RESET_A53_L2RESET] = { SRC_A53RCR0, BIT(21) },
+ [IMX8MQ_RESET_SW_NON_SCLR_M4C_RST] = { SRC_M4RCR, BIT(0) },
+ [IMX8MQ_RESET_OTG1_PHY_RESET] = { SRC_USBOPHY1_RCR, BIT(0) },
+ [IMX8MQ_RESET_OTG2_PHY_RESET] = { SRC_USBOPHY2_RCR, BIT(0) },
+ [IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N] = { SRC_MIPIPHY_RCR, BIT(1) },
+ [IMX8MQ_RESET_MIPI_DSI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(2) },
+ [IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) },
+ [IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) },
+ [IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) },
+ [IMX8MQ_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR,
+ BIT(2) | BIT(1) },
+ [IMX8MQ_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
+ [IMX8MQ_RESET_PCIE_CTRL_APPS_EN] = { SRC_PCIEPHY_RCR, BIT(6) },
+ [IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF] = { SRC_PCIEPHY_RCR, BIT(11) },
+ [IMX8MQ_RESET_HDMI_PHY_APB_RESET] = { SRC_HDMI_RCR, BIT(0) },
+ [IMX8MQ_RESET_DISP_RESET] = { SRC_DISP_RCR, BIT(0) },
+ [IMX8MQ_RESET_GPU_RESET] = { SRC_GPU_RCR, BIT(0) },
+ [IMX8MQ_RESET_VPU_RESET] = { SRC_VPU_RCR, BIT(0) },
+ [IMX8MQ_RESET_PCIEPHY2] = { SRC_PCIE2_RCR,
+ BIT(2) | BIT(1) },
+ [IMX8MQ_RESET_PCIEPHY2_PERST] = { SRC_PCIE2_RCR, BIT(3) },
+ [IMX8MQ_RESET_PCIE2_CTRL_APPS_EN] = { SRC_PCIE2_RCR, BIT(6) },
+ [IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF] = { SRC_PCIE2_RCR, BIT(11) },
+ [IMX8MQ_RESET_MIPI_CSI1_CORE_RESET] = { SRC_MIPIPHY1_RCR, BIT(0) },
+ [IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET] = { SRC_MIPIPHY1_RCR, BIT(1) },
+ [IMX8MQ_RESET_MIPI_CSI1_ESC_RESET] = { SRC_MIPIPHY1_RCR, BIT(2) },
+ [IMX8MQ_RESET_MIPI_CSI2_CORE_RESET] = { SRC_MIPIPHY2_RCR, BIT(0) },
+ [IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET] = { SRC_MIPIPHY2_RCR, BIT(1) },
+ [IMX8MQ_RESET_MIPI_CSI2_ESC_RESET] = { SRC_MIPIPHY2_RCR, BIT(2) },
+ [IMX8MQ_RESET_DDRC1_PRST] = { SRC_DDRC_RCR, BIT(0) },
+ [IMX8MQ_RESET_DDRC1_CORE_RESET] = { SRC_DDRC_RCR, BIT(1) },
+ [IMX8MQ_RESET_DDRC1_PHY_RESET] = { SRC_DDRC_RCR, BIT(2) },
+ [IMX8MQ_RESET_DDRC2_PHY_RESET] = { SRC_DDRC2_RCR, BIT(0) },
+ [IMX8MQ_RESET_DDRC2_CORE_RESET] = { SRC_DDRC2_RCR, BIT(1) },
+ [IMX8MQ_RESET_DDRC2_PRST] = { SRC_DDRC2_RCR, BIT(2) },
+};
+
+static int imx8mq_reset_set(struct reset_controller_dev *rcdev,
+ unsigned long id, bool assert)
+{
+ struct imx7_src *imx7src = to_imx7_src(rcdev);
+ const unsigned int bit = imx7src->signals[id].bit;
+ unsigned int value = assert ? bit : 0;
+
+ switch (id) {
+ case IMX8MQ_RESET_PCIEPHY:
+ case IMX8MQ_RESET_PCIEPHY2: /* fallthrough */
+ /*
+ * wait for more than 10us to release phy g_rst and
+ * btnrst
+ */
+ if (!assert)
+ udelay(10);
+ break;
+
+ case IMX8MQ_RESET_PCIE_CTRL_APPS_EN:
+ case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: /* fallthrough */
+ value = assert ? 0 : bit;
+ break;
+ }
+
+ return imx7_reset_update(imx7src, id, value);
+}
+
+static int imx8mq_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return imx8mq_reset_set(rcdev, id, true);
+}
+
+static int imx8mq_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return imx8mq_reset_set(rcdev, id, false);
+}
+
+static const struct imx7_src_variant variant_imx8mq = {
+ .signals = imx8mq_src_signals,
+ .signals_num = ARRAY_SIZE(imx8mq_src_signals),
+ .ops = {
+ .assert = imx8mq_reset_assert,
+ .deassert = imx8mq_reset_deassert,
+ },
+};
+
static int imx7_reset_probe(struct platform_device *pdev)
{
struct imx7_src *imx7src;
@@ -169,6 +290,7 @@ static int imx7_reset_probe(struct platform_device *pdev)
static const struct of_device_id imx7_reset_dt_ids[] = {
{ .compatible = "fsl,imx7d-src", .data = &variant_imx7 },
+ { .compatible = "fsl,imx8mq-src", .data = &variant_imx8mq },
{ /* sentinel */ },
};
--
2.20.1
next prev parent reply other threads:[~2019-01-22 2:11 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-22 2:10 [PATCH v5 0/3] Reset controller support for i.MX8MQ Andrey Smirnov
2019-01-22 2:10 ` [PATCH v5 1/3] reset: imx7: Add plubming to support multiple IP variants Andrey Smirnov
2019-01-22 2:10 ` [PATCH v5 2/3] dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs Andrey Smirnov
2019-01-22 2:10 ` Andrey Smirnov [this message]
2019-01-23 10:49 ` [PATCH v5 3/3] reset: imx7: Add support for i.MX8MQ IP block variant Philipp Zabel
2019-01-25 0:21 ` Andrey Smirnov
2019-01-28 10:55 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190122021043.25449-4-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=aisheng.dong@nxp.com \
--cc=cphealy@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=hongxing.zhu@nxp.com \
--cc=l.stach@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).