LKML Archive on lore.kernel.org
 help / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <andy.gross@linaro.org>,
	David Brown <david.brown@linaro.org>,
	Sibi Sankar <sibis@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 08/10] remoteproc: q6v5-mss: Active powerdomain for SDM845
Date: Mon, 21 Jan 2019 21:51:10 -0800
Message-ID: <20190122055112.30943-9-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20190122055112.30943-1-bjorn.andersson@linaro.org>

The SDM845 MSS needs the load_state powerdomain voted for during the
duration of the MSS being powered on, to let the AOSS know that it may
not perform certain power save measures. So vote for this.

Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v2:
- None

 drivers/remoteproc/qcom_q6v5_mss.c | 31 ++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 003186ce56c7..3e25016954d9 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -133,6 +133,7 @@ struct rproc_hexagon_res {
 	char **proxy_clk_names;
 	char **reset_clk_names;
 	char **active_clk_names;
+	char **active_pd_names;
 	char **proxy_pd_names;
 	int version;
 	bool need_mem_protection;
@@ -159,10 +160,12 @@ struct q6v5 {
 	struct clk *active_clks[8];
 	struct clk *reset_clks[4];
 	struct clk *proxy_clks[4];
+	struct device *active_pds[1];
 	struct device *proxy_pds[3];
 	int active_clk_count;
 	int reset_clk_count;
 	int proxy_clk_count;
+	int active_pd_count;
 	int proxy_pd_count;
 
 	struct reg_info active_regs[1];
@@ -730,10 +733,16 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 
 	qcom_q6v5_prepare(&qproc->q6v5);
 
+	ret = q6v5_pds_enable(qproc, qproc->active_pds, qproc->active_pd_count);
+	if (ret < 0) {
+		dev_err(qproc->dev, "failed to enable active power domains\n");
+		goto disable_irqs;
+	}
+
 	ret = q6v5_pds_enable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
 	if (ret < 0) {
 		dev_err(qproc->dev, "failed to enable proxy power domains\n");
-		goto disable_irqs;
+		goto disable_active_pds;
 	}
 
 	ret = q6v5_regulator_enable(qproc, qproc->proxy_regs,
@@ -839,6 +848,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 			       qproc->proxy_reg_count);
 disable_proxy_pds:
 	q6v5_pds_disable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
+disable_active_pds:
+	q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count);
 disable_irqs:
 	qcom_q6v5_unprepare(&qproc->q6v5);
 
@@ -878,6 +889,7 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
 			 qproc->active_clk_count);
 	q6v5_regulator_disable(qproc, qproc->active_regs,
 			       qproc->active_reg_count);
+	q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count);
 
 	/* In case of failure or coredump scenario where reclaiming MBA memory
 	 * could not happen reclaim it here.
@@ -1412,11 +1424,19 @@ static int q6v5_probe(struct platform_device *pdev)
 	}
 	qproc->active_reg_count = ret;
 
+	ret = q6v5_pds_attach(&pdev->dev, qproc->active_pds,
+			      desc->active_pd_names);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to attach active power domains\n");
+		goto free_rproc;
+	}
+	qproc->active_pd_count = ret;
+
 	ret = q6v5_pds_attach(&pdev->dev, qproc->proxy_pds,
 			      desc->proxy_pd_names);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to init power domains\n");
-		goto free_rproc;
+		goto detach_active_pds;
 	}
 	qproc->proxy_pd_count = ret;
 
@@ -1448,6 +1468,8 @@ static int q6v5_probe(struct platform_device *pdev)
 
 detach_proxy_pds:
 	q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
+detach_active_pds:
+	q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
 free_rproc:
 	rproc_free(rproc);
 
@@ -1465,6 +1487,7 @@ static int q6v5_remove(struct platform_device *pdev)
 	qcom_remove_smd_subdev(qproc->rproc, &qproc->smd_subdev);
 	qcom_remove_ssr_subdev(qproc->rproc, &qproc->ssr_subdev);
 
+	q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
 	q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
 
 	rproc_free(qproc->rproc);
@@ -1491,6 +1514,10 @@ static const struct rproc_hexagon_res sdm845_mss = {
 			"mnoc_axi",
 			NULL
 	},
+	.active_pd_names = (char*[]){
+			"load_state",
+			NULL
+	},
 	.proxy_pd_names = (char*[]){
 			"cx",
 			"mx",
-- 
2.18.0


  parent reply index

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-22  5:51 [PATCH v3 00/10] Qualcomm AOSS QMP driver and modem dts Bjorn Andersson
2019-01-22  5:51 ` [PATCH v3 01/10] arm64: dts: qcom: sdm845: Update PIL region memory map Bjorn Andersson
2019-01-22 18:58   ` Stephen Boyd
2019-01-22 19:24     ` Bjorn Andersson
2019-01-22 23:10       ` Doug Anderson
2019-01-23  0:30         ` Bjorn Andersson
2019-01-22 23:16   ` Doug Anderson
2019-01-23  0:39     ` Bjorn Andersson
2019-01-25 17:40   ` Sibi Sankar
2019-01-22  5:51 ` [PATCH v3 02/10] arm64: dts: qcom: sdm845: Define rmtfs memory Bjorn Andersson
2019-01-22 23:26   ` Doug Anderson
2019-01-22 23:34     ` Brian Norris
2019-01-23  0:47     ` Bjorn Andersson
2019-01-22  5:51 ` [PATCH v3 03/10] arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes Bjorn Andersson
2019-01-22 23:46   ` Doug Anderson
2019-01-23  0:26     ` Bjorn Andersson
2019-01-23  0:40       ` Doug Anderson
2019-01-23  1:09         ` Bjorn Andersson
2019-01-23 23:24           ` Doug Anderson
2019-01-24  6:22             ` Stephen Boyd
2019-01-22  5:51 ` [PATCH v3 04/10] dt-bindings: soc: qcom: Add AOSS QMP binding Bjorn Andersson
2019-01-22 19:04   ` Stephen Boyd
2019-01-22 19:25     ` Bjorn Andersson
2019-01-22 19:28       ` Stephen Boyd
2019-01-22  5:51 ` [PATCH v3 05/10] soc: qcom: Add AOSS QMP communication driver Bjorn Andersson
2019-01-22  5:51 ` [PATCH v3 06/10] soc: qcom: Add AOSS QMP genpd provider Bjorn Andersson
2019-01-22  5:51 ` [PATCH v3 07/10] remoteproc: q6v5-mss: Vote for rpmh power domains Bjorn Andersson
2019-01-23  0:01   ` Doug Anderson
2019-01-22  5:51 ` Bjorn Andersson [this message]
2019-01-22  5:51 ` [PATCH v3 09/10] arm64: dts: qcom: Add AOSS QMP node Bjorn Andersson
2019-01-22  5:51 ` [PATCH v3 10/10] arm64: dts: qcom: sdm845: Add Q6V5 MSS node Bjorn Andersson
2019-01-23  0:28   ` Doug Anderson
2019-01-23  1:10     ` Bjorn Andersson

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190122055112.30943-9-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox