linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org,
	Takashi Sakamoto <o-takashi@sakamocchi.jp>,
	Takashi Iwai <tiwai@suse.de>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.9 08/39] ALSA: oxfw: add support for APOGEE duet FireWire
Date: Thu, 24 Jan 2019 20:20:11 +0100	[thread overview]
Message-ID: <20190124190448.526288968@linuxfoundation.org> (raw)
In-Reply-To: <20190124190448.232316246@linuxfoundation.org>

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit fba43f454cdf9caa3185219d116bd2a6e6354552 ]

This commit adds support for APOGEE duet FireWire, launched 2007, already
discontinued. This model uses Oxford Semiconductor FW971 as its
communication engine. Below is information on Configuration ROM of this
unit. The unit supports some AV/C commands defined by Audio subunit
specification and vendor dependent commands.

$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
                'bmc': False,
                'chip_ID': 42949742248,
                'cmc': False,
                'cyc_clk_acc': 255,
                'generation': 0,
                'imc': False,
                'isc': True,
                'link_spd': 3,
                'max_ROM': 0,
                'max_rec': 64,
                'name': '1394',
                'node_vendor_ID': 987,
                'pmc': False},
  'root-directory': [ ['VENDOR', 987],
                      ['DESCRIPTOR', 'Apogee Electronics'],
                      ['MODEL', 122333],
                      ['DESCRIPTOR', 'Duet'],
                      [ 'NODE_CAPABILITIES',
                        { 'addressing': {'64': True, 'fix': True, 'prv': False},
                          'misc': {'int': False, 'ms': False, 'spt': True},
                          'state': { 'atn': False,
                                     'ded': False,
                                     'drq': True,
                                     'elo': False,
                                     'init': False,
                                     'lst': True,
                                     'off': False},
                          'testing': {'bas': False, 'ext': False}}],
                      [ 'UNIT',
                        [ ['SPECIFIER_ID', 41005],
                          ['VERSION', 65537],
                          ['MODEL', 122333],
                          ['DESCRIPTOR', 'Duet']]]]}

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/firewire/Kconfig     | 1 +
 sound/firewire/oxfw/oxfw.c | 8 ++++++++
 2 files changed, 9 insertions(+)

diff --git a/sound/firewire/Kconfig b/sound/firewire/Kconfig
index ab894ed1ff67..8557e54d2659 100644
--- a/sound/firewire/Kconfig
+++ b/sound/firewire/Kconfig
@@ -40,6 +40,7 @@ config SND_OXFW
 	   * Mackie(Loud) U.420/U.420d
 	   * TASCAM FireOne
 	   * Stanton Controllers & Systems 1 Deck/Mixer
+	   * APOGEE duet FireWire
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-oxfw.
diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c
index 696b6cf35003..b0395c4209ab 100644
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -20,6 +20,7 @@
 #define VENDOR_LACIE		0x00d04b
 #define VENDOR_TASCAM		0x00022e
 #define OUI_STANTON		0x001260
+#define OUI_APOGEE		0x0003db
 
 #define MODEL_SATELLITE		0x00200f
 
@@ -441,6 +442,13 @@ static const struct ieee1394_device_id oxfw_id_table[] = {
 		.vendor_id	= OUI_STANTON,
 		.model_id	= 0x002000,
 	},
+	// APOGEE, duet FireWire
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_APOGEE,
+		.model_id	= 0x01dddd,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(ieee1394, oxfw_id_table);
-- 
2.19.1




  parent reply	other threads:[~2019-01-24 19:30 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-24 19:20 [PATCH 4.9 00/39] 4.9.153-stable review Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 01/39] r8169: Add support for new Realtek Ethernet Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 02/39] ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 03/39] ipv6: Take rcu_read_lock in __inet6_bind for mapped addresses Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 04/39] platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 05/39] e1000e: allow non-monotonic SYSTIM readings Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 06/39] writeback: dont decrement wb->refcnt if !wb->bdi Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 07/39] serial: set suppress_bind_attrs flag only if builtin Greg Kroah-Hartman
2019-01-24 19:20 ` Greg Kroah-Hartman [this message]
2019-01-24 19:20 ` [PATCH 4.9 09/39] MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 10/39] arm64: perf: set suppress_bind_attrs flag to true Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 11/39] selinux: always allow mounting submounts Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 12/39] rxe: IB_WR_REG_MR does not capture MRs iova field Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 13/39] jffs2: Fix use of uninitialized delayed_work, lockdep breakage Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 14/39] pstore/ram: Do not treat empty buffers as valid Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 15/39] powerpc/xmon: Fix invocation inside lock region Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 16/39] powerpc/pseries/cpuidle: Fix preempt warning Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 17/39] media: firewire: Fix app_info parameter type in avc_ca{,_app}_info Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 18/39] net: call sk_dst_reset when set SO_DONTROUTE Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 19/39] scsi: target: use consistent left-aligned ASCII INQUIRY data Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 20/39] clk: imx6q: reset exclusive gates on init Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 21/39] kconfig: fix file name and line number of warn_ignored_character() Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 22/39] kconfig: fix memory leak when EOF is encountered in quotation Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 23/39] mmc: atmel-mci: do not assume idle after atmci_request_end Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 24/39] tty/serial: do not free trasnmit buffer page under port lock Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 25/39] perf intel-pt: Fix error with config term "pt=0" Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 26/39] perf svghelper: Fix unchecked usage of strncpy() Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 27/39] perf parse-events: " Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 28/39] dm kcopyd: Fix bug causing workqueue stalls Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 29/39] tools lib subcmd: Dont add the kernel sources to the include path Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 30/39] dm snapshot: Fix excessive memory usage and workqueue stalls Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 31/39] ALSA: bebob: fix model-id of unit for Apogee Ensemble Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 32/39] sysfs: Disable lockdep for driver bind/unbind files Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 33/39] scsi: smartpqi: correct lun reset issues Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 34/39] scsi: megaraid: fix out-of-bound array accesses Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 35/39] ocfs2: fix panic due to unrecovered local alloc Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 36/39] mm/page-writeback.c: dont break integrity writeback on ->writepage() error Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 37/39] mm, proc: be more verbose about unstable VMA flags in /proc/<pid>/smaps Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 38/39] ipmi:ssif: Fix handling of multi-part return messages Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 39/39] locking/qspinlock: Pull in asm/byteorder.h to ensure correct endianness Greg Kroah-Hartman
2019-01-25 14:43 ` [PATCH 4.9 00/39] 4.9.153-stable review shuah
2019-01-25 16:28 ` Naresh Kamboju
2019-01-25 23:17 ` Guenter Roeck
2019-01-26 12:07 ` Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190124190448.526288968@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=o-takashi@sakamocchi.jp \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).