linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Renato Lui Geh <renatogeh@gmail.com>
To: lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org,
	knaack.h@gmx.de, pmeerw@pmeerw.net, gregkh@linuxfoundation.org,
	stefan.popa@analog.com, alexandru.Ardelean@analog.com,
	giuliano.belinassi@usp.br
Cc: linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
	linux-kernel@vger.kernel.org, kernel-usp@googlegroups.com
Subject: [PATCH v2 1/2] staging: iio: ad7780: add gain & filter gpio support
Date: Sun, 27 Jan 2019 18:30:47 -0200	[thread overview]
Message-ID: <20190127203044.yytctplecwey4an4@renatolg> (raw)

Previously, the AD7780 driver only supported gpio for the 'powerdown'
pin. This commit adds suppport for the 'gain' and 'filter' pin.

Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Signed-off-by: Giuliano Belinassi <giuliano.belinassi@usp.br>
Co-developed-by: Giuliano Belinassi <giuliano.belinassi@usp.br>
---
Changes in v2:
	- Filter reading changed to mHz
	- Storing filter, gain and voltage to chip_info

 drivers/staging/iio/adc/ad7780.c       | 103 ++++++++++++++++++++++---
 include/linux/iio/adc/ad_sigma_delta.h |   5 ++
 2 files changed, 99 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c
index c4a85789c2db..82394e31b168 100644
--- a/drivers/staging/iio/adc/ad7780.c
+++ b/drivers/staging/iio/adc/ad7780.c
@@ -39,6 +39,15 @@
 #define AD7170_PATTERN		(AD7780_PAT0 | AD7170_PAT2)
 #define AD7170_PATTERN_MASK	(AD7780_PAT0 | AD7780_PAT1 | AD7170_PAT2)
 
+#define AD7780_GAIN_GPIO	0
+#define AD7780_FILTER_GPIO	1
+
+#define AD7780_GAIN_MIDPOINT	64
+#define AD7780_FILTER_MIDPOINT	13350
+
+static const unsigned int ad778x_gain[2]    = { 1, 128 };
+static const unsigned int ad778x_filter[2]  = { 10000, 16700 };
+
 struct ad7780_chip_info {
 	struct iio_chan_spec	channel;
 	unsigned int		pattern_mask;
@@ -50,7 +59,11 @@ struct ad7780_state {
 	const struct ad7780_chip_info	*chip_info;
 	struct regulator		*reg;
 	struct gpio_desc		*powerdown_gpio;
-	unsigned int	gain;
+	struct gpio_desc		*gain_gpio;
+	struct gpio_desc		*filter_gpio;
+	unsigned int			gain;
+	unsigned int			filter;
+	unsigned int			int_vref_mv;
 
 	struct ad_sigma_delta sd;
 };
@@ -104,17 +117,65 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
 		voltage_uv = regulator_get_voltage(st->reg);
 		if (voltage_uv < 0)
 			return voltage_uv;
-		*val = (voltage_uv / 1000) * st->gain;
+		voltage_uv /= 1000;
+		*val = voltage_uv * st->gain;
 		*val2 = chan->scan_type.realbits - 1;
+		st->int_vref_mv = voltage_uv;
 		return IIO_VAL_FRACTIONAL_LOG2;
 	case IIO_CHAN_INFO_OFFSET:
 		*val = -(1 << (chan->scan_type.realbits - 1));
 		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = st->filter;
+		return IIO_VAL_INT;
 	}
 
 	return -EINVAL;
 }
 
+static int ad7780_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long m)
+{
+	struct ad7780_state *st = iio_priv(indio_dev);
+	const struct ad7780_chip_info *chip_info = st->chip_info;
+	int vref, gain;
+	unsigned int full_scale;
+
+	if (!chip_info->is_ad778x)
+		return 0;
+
+	switch (m) {
+	case IIO_CHAN_INFO_SCALE:
+		if (val != 0)
+			return -EINVAL;
+
+		vref = st->int_vref_mv * 1000000LL;
+		full_scale = 1 << (chip_info->channel.scan_type.realbits - 1);
+		gain = DIV_ROUND_CLOSEST(vref, full_scale);
+		gain = DIV_ROUND_CLOSEST(gain, val2);
+		st->gain = gain;
+		if (gain < AD7780_GAIN_MIDPOINT)
+			gain = 0;
+		else
+			gain = 1;
+		gpiod_set_value(st->gain_gpio, gain);
+	break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (1000*val + val2/1000 < AD7780_FILTER_MIDPOINT)
+			val = 0;
+		else
+			val = 1;
+		st->filter = ad778x_filter[val];
+		gpiod_set_value(st->filter_gpio, val);
+	break;
+	}
+
+	return 0;
+}
+
 static int ad7780_postprocess_sample(struct ad_sigma_delta *sigma_delta,
 				     unsigned int raw_sample)
 {
@@ -126,10 +187,8 @@ static int ad7780_postprocess_sample(struct ad_sigma_delta *sigma_delta,
 		return -EIO;
 
 	if (chip_info->is_ad778x) {
-		if (raw_sample & AD7780_GAIN)
-			st->gain = 1;
-		else
-			st->gain = 128;
+		st->gain = ad778x_gain[raw_sample & AD7780_GAIN];
+		st->filter = ad778x_filter[raw_sample & AD7780_FILTER];
 	}
 
 	return 0;
@@ -141,18 +200,20 @@ static const struct ad_sigma_delta_info ad7780_sigma_delta_info = {
 	.has_registers = false,
 };
 
-#define AD7780_CHANNEL(bits, wordsize) \
+#define AD7170_CHANNEL(bits, wordsize) \
 	AD_SD_CHANNEL_NO_SAMP_FREQ(1, 0, 0, bits, 32, wordsize - bits)
+#define AD7780_CHANNEL(bits, wordsize) \
+	AD_SD_CHANNEL_GAIN_FILTER(1, 0, 0, bits, 32, wordsize - bits)
 
 static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {
 	[ID_AD7170] = {
-		.channel = AD7780_CHANNEL(12, 24),
+		.channel = AD7170_CHANNEL(12, 24),
 		.pattern = AD7170_PATTERN,
 		.pattern_mask = AD7170_PATTERN_MASK,
 		.is_ad778x = false,
 	},
 	[ID_AD7171] = {
-		.channel = AD7780_CHANNEL(16, 24),
+		.channel = AD7170_CHANNEL(16, 24),
 		.pattern = AD7170_PATTERN,
 		.pattern_mask = AD7170_PATTERN_MASK,
 		.is_ad778x = false,
@@ -173,6 +234,7 @@ static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {
 
 static const struct iio_info ad7780_info = {
 	.read_raw = ad7780_read_raw,
+	.write_raw = ad7780_write_raw,
 };
 
 static int ad7780_probe(struct spi_device *spi)
@@ -222,6 +284,29 @@ static int ad7780_probe(struct spi_device *spi)
 		goto error_disable_reg;
 	}
 
+	if (st->chip_info->is_ad778x) {
+		st->gain_gpio = devm_gpiod_get_optional(&spi->dev,
+							"gain",
+							GPIOD_OUT_HIGH);
+		if (IS_ERR(st->gain_gpio)) {
+			ret = PTR_ERR(st->gain_gpio);
+			dev_err(&spi->dev, "Failed to request gain GPIO: %d\n",
+				ret);
+			goto error_disable_reg;
+		}
+
+		st->filter_gpio = devm_gpiod_get_optional(&spi->dev,
+							  "filter",
+							  GPIOD_OUT_HIGH);
+		if (IS_ERR(st->filter_gpio)) {
+			ret = PTR_ERR(st->filter_gpio);
+			dev_err(&spi->dev,
+				"Failed to request filter GPIO: %d\n",
+				ret);
+			goto error_disable_reg;
+		}
+	}
+
 	ret = ad_sd_setup_buffer_and_trigger(indio_dev);
 	if (ret)
 		goto error_disable_reg;
diff --git a/include/linux/iio/adc/ad_sigma_delta.h b/include/linux/iio/adc/ad_sigma_delta.h
index 7e84351fa2c0..c01da869de83 100644
--- a/include/linux/iio/adc/ad_sigma_delta.h
+++ b/include/linux/iio/adc/ad_sigma_delta.h
@@ -176,6 +176,11 @@ int ad_sd_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig);
 	__AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \
 		_storagebits, _shift, NULL, IIO_VOLTAGE, 0)
 
+#define AD_SD_CHANNEL_GAIN_FILTER(_si, _channel, _address, _bits, \
+	_storagebits, _shift) \
+	__AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \
+		_storagebits, _shift, NULL, IIO_VOLTAGE, BIT(IIO_CHAN_INFO_RAW))
+
 #define AD_SD_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \
 	__AD_SD_CHANNEL(_si, 0, -1, _address, _bits, \
 		_storagebits, _shift, NULL, IIO_TEMP, \
-- 
2.20.1


             reply	other threads:[~2019-01-27 20:30 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-27 20:30 Renato Lui Geh [this message]
2019-01-30 12:23 ` [PATCH v2 1/2] staging: iio: ad7780: add gain & filter gpio support Popa, Stefan Serban
2019-02-01 14:55   ` Renato Lui Geh
2019-02-01 15:57     ` Popa, Stefan Serban
2019-02-01 17:55       ` Renato Lui Geh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190127203044.yytctplecwey4an4@renatolg \
    --to=renatogeh@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=alexandru.Ardelean@analog.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=giuliano.belinassi@usp.br \
    --cc=gregkh@linuxfoundation.org \
    --cc=jic23@kernel.org \
    --cc=kernel-usp@googlegroups.com \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    --cc=stefan.popa@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).