This is the start of the stable review cycle for the 4.14.97 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Thu Jan 31 11:31:10 UTC 2019. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.97-rc1.gz or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Linux 4.14.97-rc1 Anand Jain <anand.jain@oracle.com> btrfs: dev-replace: go back to suspended state if target device is missing Jeff Mahoney <jeffm@suse.com> btrfs: fix error handling in btrfs_dev_replace_start Pan Bian <bianpan2016@163.com> f2fs: read page index before freeing Juergen Gross <jgross@suse.com> xen: Fix x86 sched_clock() interface for xen Pavel Tatashin <pasha.tatashin@oracle.com> x86/xen/time: Output xen sched_clock time from 0 Joao Martins <joao.m.martins@oracle.com> x86/xen/time: setup vcpu 0 time info page Joao Martins <joao.m.martins@oracle.com> x86/xen/time: set pvclock flags on xen_time_init() Joao Martins <joao.m.martins@oracle.com> x86/pvclock: add setter for pvclock_pvti_cpu0_va Joao Martins <joao.m.martins@oracle.com> ptp_kvm: probe for kvm guest availability Mathias Nyman <mathias.nyman@linux.intel.com> xhci: Fix leaking USB3 shared_hcd at xhci removal Jack Pham <jackp@codeaurora.org> usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanup Raju Rangoju <rajur@chelsio.com> nvmet-rdma: fix null dereference under heavy load Israel Rukshin <israelr@mellanox.com> nvmet-rdma: Add unlikely for response allocated check David Hildenbrand <david@redhat.com> s390/smp: Fix calling smp_call_ipl_cpu() from ipl CPU Sean Christopherson <sean.j.christopherson@intel.com> KVM: x86: Fix a 4.14 backport regression related to userspace/guest FPU Jose Abreu <Jose.Abreu@synopsys.com> net: stmmac: Use correct values in TQS/RQS fields Sasha Levin <sashal@kernel.org> Revert "seccomp: add a selftest for get_metadata" Milian Wolff <milian.wolff@kdab.com> perf unwind: Take pgoff into account when reporting elf to libdwfl Martin Vuille <jpmv27@aim.com> perf unwind: Unwind with libdw doesn't take symfs into account Nicolas Pitre <nicolas.pitre@linaro.org> vt: invoke notifier on screen size change Oliver Hartkopp <socketcan@hartkopp.net> can: bcm: check timer values before ktime conversion Manfred Schlaegl <manfred.schlaegl@ginzinger.com> can: dev: __can_get_echo_skb(): fix bogous check for non-existing skb by removing it Marc Zyngier <marc.zyngier@arm.com> irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size Thomas Gleixner <tglx@linutronix.de> posix-cpu-timers: Unbreak timer rearming Daniel Drake <drake@endlessm.com> x86/kaslr: Fix incorrect i8254 outb() parameters Dave Hansen <dave.hansen@linux.intel.com> x86/selftests/pkeys: Fork() to check for state being preserved Dave Hansen <dave.hansen@linux.intel.com> x86/pkeys: Properly copy pkey state at fork() Alexander Popov <alex.popov@linux.com> KVM: x86: Fix single-step debugging Milan Broz <gmazyland@gmail.com> dm crypt: fix parsing of extended IV arguments Joe Thornber <ejt@redhat.com> dm thin: fix passdown_double_checking_shared_status() Dan Williams <dan.j.williams@intel.com> acpi/nfit: Fix command-supported detection Dan Williams <dan.j.williams@intel.com> acpi/nfit: Block function zero DSMs Dmitry Torokhov <dmitry.torokhov@gmail.com> Input: uinput - fix undefined behavior in uinput_validate_absinfo() Rasmus Villemoes <linux@rasmusvillemoes.dk> compiler.h: enable builtin overflow checkers and add fallback code Tom Panfil <tom@steelseries.com> Input: xpad - add support for SteelSeries Stratus Duo Pavel Shilovsky <pshilov@microsoft.com> CIFS: Do not reconnect TCP session in add_credits() Pavel Shilovsky <pshilov@microsoft.com> CIFS: Fix credit calculation for encrypted reads with errors Pavel Shilovsky <pshilov@microsoft.com> CIFS: Fix credits calculations for reads with errors Pavel Shilovsky <pshilov@microsoft.com> CIFS: Fix possible hang during async MTU reads and writes Dexuan Cui <decui@microsoft.com> Drivers: hv: vmbus: Check for ring when getting debug info Vitaly Kuznetsov <vkuznets@redhat.com> hv_balloon: avoid touching uninitialized struct page during tail onlining Paul Fulghum <paulkf@microgate.com> tty/n_hdlc: fix __might_sleep warning Samir Virmani <samir@embedur.com> uart: Fix crash in uart_write and uart_put_char Greg Kroah-Hartman <gregkh@linuxfoundation.org> tty: Handle problem if line discipline does not have receive_buf Michael Straube <straube.linux@gmail.com> staging: rtl8188eu: Add device code for D-Link DWA-121 rev B1 Gustavo A. R. Silva <gustavo@embeddedor.com> char/mwave: fix potential Spectre v1 vulnerability Gerald Schaefer <gerald.schaefer@de.ibm.com> s390/smp: fix CPU hotplug deadlock with CPU rescan Christian Borntraeger <borntraeger@de.ibm.com> s390/early: improve machine detection Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> ARC: perf: map generic branches to correct hardware condition Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> ARC: adjust memblock_reserve of kernel memory Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> ARCv2: lib: memeset: fix doing prefetchw outside of buffer Anthony Wong <anthony.wong@canonical.com> ALSA: hda - Add mute LED support for HP ProBook 470 G5 Gustavo A. R. Silva <gustavo@embeddedor.com> ASoC: rt5514-spi: Fix potential NULL pointer dereference Kangjie Lu <kjlu@umn.edu> ASoC: atom: fix a missing check of snd_pcm_lib_malloc_pages Charles Yeh <charlesyeh522@gmail.com> USB: serial: pl2303: add new PID to support PL2303TB Max Schulze <max.schulze@posteo.de> USB: serial: simple: add Motorola Tetra TPG2200 device id Tomas Winkler <tomas.winkler@intel.com> mei: me: add denverton innovation engine device IDs Vijay Viswanath <vviswana@codeaurora.org> mmc: Kconfig: Enable CONFIG_MMC_SDHCI_IO_ACCESSORS Paolo Abeni <pabeni@redhat.com> ipfrag: really prevent allocation on netns exit Willem de Bruijn <willemb@google.com> tcp: allow MSG_ZEROCOPY transmission also in CLOSE_WAIT state Ido Schimmel <idosch@mellanox.com> net: ipv4: Fix memory leak in network namespace dismantle Jason Wang <jasowang@redhat.com> vhost: log dirty page correctly Ross Lagerwall <ross.lagerwall@citrix.com> openvswitch: Avoid OOB read when parsing flow nlattrs Cong Wang <xiyou.wangcong@gmail.com> net_sched: refetch skb protocol for each filter Thomas Petazzoni <thomas.petazzoni@bootlin.com> net: phy: mdio_bus: add missing device_del() in mdiobus_register() error handling Ross Lagerwall <ross.lagerwall@citrix.com> net: Fix usage of pskb_trim_rcsum Yunjian Wang <wangyunjian@huawei.com> net: bridge: Fix ethernet header pointer before check skb forwardable Lendacky, Thomas <Thomas.Lendacky@amd.com> amd-xgbe: Fix mdio access for non-zero ports and clause 45 PHYs ------------- Diffstat: Makefile | 4 +- arch/arc/include/asm/perf_event.h | 3 +- arch/arc/lib/memset-archs.S | 40 ++++- arch/arc/mm/init.c | 3 +- arch/s390/kernel/early.c | 4 +- arch/s390/kernel/setup.c | 2 + arch/s390/kernel/smp.c | 12 +- arch/x86/entry/vdso/vma.c | 2 +- arch/x86/include/asm/mmu_context.h | 18 ++ arch/x86/include/asm/pvclock.h | 19 +- arch/x86/kernel/kvmclock.c | 7 +- arch/x86/kernel/pvclock.c | 14 ++ arch/x86/kvm/x86.c | 9 +- arch/x86/lib/kaslr.c | 4 +- arch/x86/xen/suspend.c | 4 + arch/x86/xen/time.c | 118 ++++++++++++- arch/x86/xen/xen-ops.h | 2 + drivers/acpi/nfit/core.c | 61 +++++-- drivers/char/mwave/mwavedd.c | 7 + drivers/hv/hv_balloon.c | 10 +- drivers/hv/ring_buffer.c | 31 ++-- drivers/hv/vmbus_drv.c | 91 ++++++---- drivers/input/joystick/xpad.c | 3 + drivers/input/misc/uinput.c | 5 +- drivers/irqchip/irq-gic-v3-its.c | 25 +-- drivers/md/dm-crypt.c | 25 ++- drivers/md/dm-thin-metadata.c | 4 +- drivers/md/dm-thin-metadata.h | 2 +- drivers/md/dm-thin.c | 10 +- drivers/misc/mei/hw-me-regs.h | 2 + drivers/misc/mei/pci-me.c | 2 + drivers/mmc/host/Kconfig | 1 + drivers/net/can/dev.c | 27 ++- drivers/net/ethernet/amd/xgbe/xgbe-common.h | 2 - drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 22 ++- drivers/net/ethernet/stmicro/stmmac/common.h | 3 +- drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 15 +- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 22 ++- drivers/net/phy/mdio_bus.c | 1 + drivers/net/ppp/pppoe.c | 1 + drivers/nvme/target/rdma.c | 17 +- drivers/ptp/ptp_kvm.c | 5 +- drivers/s390/char/sclp_config.c | 2 + drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 + drivers/tty/n_hdlc.c | 1 + drivers/tty/serial/serial_core.c | 12 +- drivers/tty/tty_io.c | 3 +- drivers/tty/vt/vt.c | 1 + drivers/usb/dwc3/gadget.c | 2 + drivers/usb/host/xhci-mtk.c | 6 +- drivers/usb/host/xhci-pci.c | 1 + drivers/usb/host/xhci-plat.c | 6 +- drivers/usb/host/xhci-tegra.c | 1 + drivers/usb/host/xhci.c | 2 - drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 2 + drivers/usb/serial/usb-serial-simple.c | 3 +- drivers/vhost/net.c | 3 +- drivers/vhost/vhost.c | 97 ++++++++-- drivers/vhost/vhost.h | 3 +- drivers/xen/events/events_base.c | 2 +- fs/btrfs/dev-replace.c | 9 +- fs/cifs/cifssmb.c | 35 ++-- fs/cifs/connect.c | 21 +++ fs/cifs/smb2ops.c | 62 ++++--- fs/f2fs/node.c | 4 +- include/linux/compiler-clang.h | 14 ++ include/linux/compiler-gcc.h | 4 + include/linux/compiler-intel.h | 4 + include/linux/hyperv.h | 5 +- include/linux/overflow.h | 205 ++++++++++++++++++++++ include/linux/skbuff.h | 1 + include/net/ip_fib.h | 2 +- include/xen/interface/vcpu.h | 42 +++++ kernel/time/posix-cpu-timers.c | 1 + net/bridge/br_forward.c | 9 +- net/bridge/br_netfilter_ipv6.c | 1 + net/bridge/netfilter/nft_reject_bridge.c | 1 + net/can/bcm.c | 27 +++ net/ipv4/fib_frontend.c | 4 +- net/ipv4/fib_trie.c | 15 +- net/ipv4/inet_fragment.c | 2 +- net/ipv4/ip_input.c | 1 + net/ipv4/tcp.c | 2 +- net/openvswitch/flow_netlink.c | 2 +- net/sched/cls_api.c | 3 +- sound/pci/hda/patch_conexant.c | 1 + sound/soc/codecs/rt5514-spi.c | 2 + sound/soc/intel/atom/sst-mfld-platform-pcm.c | 8 +- tools/perf/util/unwind-libdw.c | 4 +- tools/testing/selftests/seccomp/seccomp_bpf.c | 61 ------- tools/testing/selftests/x86/protection_keys.c | 41 +++-- 92 files changed, 1073 insertions(+), 328 deletions(-)
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: "Lendacky, Thomas" <Thomas.Lendacky@amd.com> [ Upstream commit 5ab3121beeb76aa6090195b67d237115860dd9ec ] The XGBE hardware has support for performing MDIO operations using an MDIO command request. The driver mistakenly uses the mdio port address as the MDIO command request device address instead of the MDIO command request port address. Additionally, the driver does not properly check for and create a clause 45 MDIO command. Check the supplied MDIO register to determine if the request is a clause 45 operation (MII_ADDR_C45). For a clause 45 operation, extract the device address and register number from the supplied MDIO register and use them to set the MDIO command request device address and register number fields. For a clause 22 operation, the MDIO request device address is set to zero and the MDIO command request register number is set to the supplied MDIO register. In either case, the supplied MDIO port address is used as the MDIO command request port address. Fixes: 732f2ab7afb9 ("amd-xgbe: Add support for MDIO attached PHYs") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/ethernet/amd/xgbe/xgbe-common.h | 2 -- drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 22 ++++++++++++++++------ 2 files changed, 16 insertions(+), 8 deletions(-) --- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h @@ -431,8 +431,6 @@ #define MAC_MDIOSCAR_PA_WIDTH 5 #define MAC_MDIOSCAR_RA_INDEX 0 #define MAC_MDIOSCAR_RA_WIDTH 16 -#define MAC_MDIOSCAR_REG_INDEX 0 -#define MAC_MDIOSCAR_REG_WIDTH 21 #define MAC_MDIOSCCDR_BUSY_INDEX 22 #define MAC_MDIOSCCDR_BUSY_WIDTH 1 #define MAC_MDIOSCCDR_CMD_INDEX 16 --- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c @@ -1284,6 +1284,20 @@ static void xgbe_write_mmd_regs(struct x } } +static unsigned int xgbe_create_mdio_sca(int port, int reg) +{ + unsigned int mdio_sca, da; + + da = (reg & MII_ADDR_C45) ? reg >> 16 : 0; + + mdio_sca = 0; + XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, RA, reg); + XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, PA, port); + XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, DA, da); + + return mdio_sca; +} + static int xgbe_write_ext_mii_regs(struct xgbe_prv_data *pdata, int addr, int reg, u16 val) { @@ -1291,9 +1305,7 @@ static int xgbe_write_ext_mii_regs(struc reinit_completion(&pdata->mdio_complete); - mdio_sca = 0; - XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, REG, reg); - XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, DA, addr); + mdio_sca = xgbe_create_mdio_sca(addr, reg); XGMAC_IOWRITE(pdata, MAC_MDIOSCAR, mdio_sca); mdio_sccd = 0; @@ -1317,9 +1329,7 @@ static int xgbe_read_ext_mii_regs(struct reinit_completion(&pdata->mdio_complete); - mdio_sca = 0; - XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, REG, reg); - XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, DA, addr); + mdio_sca = xgbe_create_mdio_sca(addr, reg); XGMAC_IOWRITE(pdata, MAC_MDIOSCAR, mdio_sca); mdio_sccd = 0;
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Yunjian Wang <wangyunjian@huawei.com> [ Upstream commit 28c1382fa28f2e2d9d0d6f25ae879b5af2ecbd03 ] The skb header should be set to ethernet header before using is_skb_forwardable. Because the ethernet header length has been considered in is_skb_forwardable(including dev->hard_header_len length). To reproduce the issue: 1, add 2 ports on linux bridge br using following commands: $ brctl addbr br $ brctl addif br eth0 $ brctl addif br eth1 2, the MTU of eth0 and eth1 is 1500 3, send a packet(Data 1480, UDP 8, IP 20, Ethernet 14, VLAN 4) from eth0 to eth1 So the expect result is packet larger than 1500 cannot pass through eth0 and eth1. But currently, the packet passes through success, it means eth1's MTU limit doesn't take effect. Fixes: f6367b4660dd ("bridge: use is_skb_forwardable in forward path") Cc: bridge@lists.linux-foundation.org Cc: Nkolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- net/bridge/br_forward.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -35,10 +35,10 @@ static inline int should_deliver(const s int br_dev_queue_push_xmit(struct net *net, struct sock *sk, struct sk_buff *skb) { + skb_push(skb, ETH_HLEN); if (!is_skb_forwardable(skb->dev, skb)) goto drop; - skb_push(skb, ETH_HLEN); br_drop_fake_rtable(skb); if (skb->ip_summed == CHECKSUM_PARTIAL && @@ -96,12 +96,11 @@ static void __br_forward(const struct ne net = dev_net(indev); } else { if (unlikely(netpoll_tx_running(to->br->dev))) { - if (!is_skb_forwardable(skb->dev, skb)) { + skb_push(skb, ETH_HLEN); + if (!is_skb_forwardable(skb->dev, skb)) kfree_skb(skb); - } else { - skb_push(skb, ETH_HLEN); + else br_netpoll_send_skb(to, skb); - } return; } br_hook = NF_BR_LOCAL_OUT;
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Ross Lagerwall <ross.lagerwall@citrix.com> [ Upstream commit 6c57f0458022298e4da1729c67bd33ce41c14e7a ] In certain cases, pskb_trim_rcsum() may change skb pointers. Reinitialize header pointers afterwards to avoid potential use-after-frees. Add a note in the documentation of pskb_trim_rcsum(). Found by KASAN. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/ppp/pppoe.c | 1 + include/linux/skbuff.h | 1 + net/bridge/br_netfilter_ipv6.c | 1 + net/bridge/netfilter/nft_reject_bridge.c | 1 + net/ipv4/ip_input.c | 1 + 5 files changed, 5 insertions(+) --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -445,6 +445,7 @@ static int pppoe_rcv(struct sk_buff *skb if (pskb_trim_rcsum(skb, len)) goto drop; + ph = pppoe_hdr(skb); pn = pppoe_pernet(dev_net(dev)); /* Note that get_item does a sock_hold(), so sk_pppox(po) --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -3163,6 +3163,7 @@ int pskb_trim_rcsum_slow(struct sk_buff * * This is exactly the same as pskb_trim except that it ensures the * checksum of received packets are still valid after the operation. + * It can change skb pointers. */ static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len) --- a/net/bridge/br_netfilter_ipv6.c +++ b/net/bridge/br_netfilter_ipv6.c @@ -131,6 +131,7 @@ int br_validate_ipv6(struct net *net, st IPSTATS_MIB_INDISCARDS); goto drop; } + hdr = ipv6_hdr(skb); } if (hdr->nexthdr == NEXTHDR_HOP && br_nf_check_hbh_len(skb)) goto drop; --- a/net/bridge/netfilter/nft_reject_bridge.c +++ b/net/bridge/netfilter/nft_reject_bridge.c @@ -230,6 +230,7 @@ static bool reject6_br_csum_ok(struct sk pskb_trim_rcsum(skb, ntohs(ip6h->payload_len) + sizeof(*ip6h))) return false; + ip6h = ipv6_hdr(skb); thoff = ipv6_skip_exthdr(skb, ((u8*)(ip6h+1) - skb->data), &proto, &fo); if (thoff < 0 || thoff >= skb->len || (fo & htons(~0x7)) != 0) return false; --- a/net/ipv4/ip_input.c +++ b/net/ipv4/ip_input.c @@ -481,6 +481,7 @@ int ip_rcv(struct sk_buff *skb, struct n goto drop; } + iph = ip_hdr(skb); skb->transport_header = skb->network_header + iph->ihl*4; /* Remove any debris in the socket control block */
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [ Upstream commit e40e2a2e78664fa90ea4b9bdf4a84efce2fea9d9 ] The current code in __mdiobus_register() doesn't properly handle failures returned by the devm_gpiod_get_optional() call: it returns immediately, without unregistering the device that was added by the call to device_register() earlier in the function. This leaves a stale device, which then causes a NULL pointer dereference in the code that handles deferred probing: [ 1.489982] Unable to handle kernel NULL pointer dereference at virtual address 00000074 [ 1.498110] pgd = (ptrval) [ 1.500838] [00000074] *pgd=00000000 [ 1.504432] Internal error: Oops: 17 [#1] SMP ARM [ 1.509133] Modules linked in: [ 1.512192] CPU: 1 PID: 51 Comm: kworker/1:3 Not tainted 4.20.0-00039-g3b73a4cc8b3e-dirty #99 [ 1.520708] Hardware name: Xilinx Zynq Platform [ 1.525261] Workqueue: events deferred_probe_work_func [ 1.530403] PC is at klist_next+0x10/0xfc [ 1.534403] LR is at device_for_each_child+0x40/0x94 [ 1.539361] pc : [<c0683fbc>] lr : [<c0455d90>] psr: 200e0013 [ 1.545628] sp : ceeefe68 ip : 00000001 fp : ffffe000 [ 1.550863] r10: 00000000 r9 : c0c66790 r8 : 00000000 [ 1.556079] r7 : c0457d44 r6 : 00000000 r5 : ceeefe8c r4 : cfa2ec78 [ 1.562604] r3 : 00000064 r2 : c0457d44 r1 : ceeefe8c r0 : 00000064 [ 1.569129] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 1.576263] Control: 18c5387d Table: 0ed7804a DAC: 00000051 [ 1.582013] Process kworker/1:3 (pid: 51, stack limit = 0x(ptrval)) [ 1.588280] Stack: (0xceeefe68 to 0xceef0000) [ 1.592630] fe60: cfa2ec78 c0c03c08 00000000 c0457d44 00000000 c0c66790 [ 1.600814] fe80: 00000000 c0455d90 ceeefeac 00000064 00000000 0d7a542e cee9d494 cfa2ec78 [ 1.608998] fea0: cfa2ec78 00000000 c0457d44 c0457d7c cee9d494 c0c03c08 00000000 c0455dac [ 1.617182] fec0: cf98ba44 cf926a00 cee9d494 0d7a542e 00000000 cf935a10 cf935a10 cf935a10 [ 1.625366] fee0: c0c4e9b8 c0457d7c c0c4e80c 00000001 cf935a10 c0457df4 cf935a10 c0c4e99c [ 1.633550] ff00: c0c4e99c c045a27c c0c4e9c4 ced63f80 cfde8a80 cfdebc00 00000000 c013893c [ 1.641734] ff20: cfde8a80 cfde8a80 c07bd354 ced63f80 ced63f94 cfde8a80 00000008 c0c02d00 [ 1.649936] ff40: cfde8a98 cfde8a80 ffffe000 c0139a30 ffffe000 c0c6624a c07bd354 00000000 [ 1.658120] ff60: ffffe000 cee9e780 ceebfe00 00000000 ceeee000 ced63f80 c0139788 cf8cdea4 [ 1.666304] ff80: cee9e79c c013e598 00000001 ceebfe00 c013e44c 00000000 00000000 00000000 [ 1.674488] ffa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 [ 1.682671] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.690855] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 1.699058] [<c0683fbc>] (klist_next) from [<c0455d90>] (device_for_each_child+0x40/0x94) [ 1.707241] [<c0455d90>] (device_for_each_child) from [<c0457d7c>] (device_reorder_to_tail+0x38/0x88) [ 1.716476] [<c0457d7c>] (device_reorder_to_tail) from [<c0455dac>] (device_for_each_child+0x5c/0x94) [ 1.725692] [<c0455dac>] (device_for_each_child) from [<c0457d7c>] (device_reorder_to_tail+0x38/0x88) [ 1.734927] [<c0457d7c>] (device_reorder_to_tail) from [<c0457df4>] (device_pm_move_to_tail+0x28/0x40) [ 1.744235] [<c0457df4>] (device_pm_move_to_tail) from [<c045a27c>] (deferred_probe_work_func+0x58/0x8c) [ 1.753746] [<c045a27c>] (deferred_probe_work_func) from [<c013893c>] (process_one_work+0x210/0x4fc) [ 1.762888] [<c013893c>] (process_one_work) from [<c0139a30>] (worker_thread+0x2a8/0x5c0) [ 1.771072] [<c0139a30>] (worker_thread) from [<c013e598>] (kthread+0x14c/0x154) [ 1.778482] [<c013e598>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 1.785689] Exception stack(0xceeeffb0 to 0xceeefff8) [ 1.790739] ffa0: 00000000 00000000 00000000 00000000 [ 1.798923] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.807107] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 1.813724] Code: e92d47f0 e1a05000 e8900048 e1a00003 (e5937010) [ 1.819844] ---[ end trace 3c2c0c8b65399ec9 ]--- The actual error that we had from devm_gpiod_get_optional() was -EPROBE_DEFER, due to the GPIO being provided by a driver that is probed later than the Ethernet controller driver. To fix this, we simply add the missing device_del() invocation in the error path. Fixes: 69226896ad636 ("mdio_bus: Issue GPIO RESET to PHYs") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/phy/mdio_bus.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -358,6 +358,7 @@ int __mdiobus_register(struct mii_bus *b if (IS_ERR(gpiod)) { dev_err(&bus->dev, "mii_bus %s couldn't get reset GPIO\n", bus->id); + device_del(&bus->dev); return PTR_ERR(gpiod); } else if (gpiod) { bus->reset_gpiod = gpiod;
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Cong Wang <xiyou.wangcong@gmail.com> [ Upstream commit cd0c4e70fc0ccfa705cdf55efb27519ce9337a26 ] Martin reported a set of filters don't work after changing from reclassify to continue. Looking into the code, it looks like skb protocol is not always fetched for each iteration of the filters. But, as demonstrated by Martin, TC actions could modify skb->protocol, for example act_vlan, this means we have to refetch skb protocol in each iteration, rather than using the one we fetch in the beginning of the loop. This bug is _not_ introduced by commit 3b3ae880266d ("net: sched: consolidate tc_classify{,_compat}"), technically, if act_vlan is the only action that modifies skb protocol, then it is commit c7e2b9689ef8 ("sched: introduce vlan action") which introduced this bug. Reported-by: Martin Olsson <martin.olsson+netdev@sentorsecurity.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- net/sched/cls_api.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -318,7 +318,6 @@ EXPORT_SYMBOL(tcf_block_put); int tcf_classify(struct sk_buff *skb, const struct tcf_proto *tp, struct tcf_result *res, bool compat_mode) { - __be16 protocol = tc_skb_protocol(skb); #ifdef CONFIG_NET_CLS_ACT const int max_reclassify_loop = 4; const struct tcf_proto *orig_tp = tp; @@ -328,6 +327,7 @@ int tcf_classify(struct sk_buff *skb, co reclassify: #endif for (; tp; tp = rcu_dereference_bh(tp->next)) { + __be16 protocol = tc_skb_protocol(skb); int err; if (tp->protocol != protocol && @@ -359,7 +359,6 @@ reset: } tp = first_tp; - protocol = tc_skb_protocol(skb); goto reclassify; #endif }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Ross Lagerwall <ross.lagerwall@citrix.com> [ Upstream commit 04a4af334b971814eedf4e4a413343ad3287d9a9 ] For nested and variable attributes, the expected length of an attribute is not known and marked by a negative number. This results in an OOB read when the expected length is later used to check if the attribute is all zeros. Fix this by using the actual length of the attribute rather than the expected length. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- net/openvswitch/flow_netlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/net/openvswitch/flow_netlink.c +++ b/net/openvswitch/flow_netlink.c @@ -459,7 +459,7 @@ static int __parse_flow_nlattrs(const st return -EINVAL; } - if (!nz || !is_all_zero(nla_data(nla), expected_len)) { + if (!nz || !is_all_zero(nla_data(nla), nla_len(nla))) { attrs |= 1 << type; a[type] = nla; }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Jason Wang <jasowang@redhat.com> [ Upstream commit cc5e710759470bc7f3c61d11fd54586f15fdbdf4 ] Vhost dirty page logging API is designed to sync through GPA. But we try to log GIOVA when device IOTLB is enabled. This is wrong and may lead to missing data after migration. To solve this issue, when logging with device IOTLB enabled, we will: 1) reuse the device IOTLB translation result of GIOVA->HVA mapping to get HVA, for writable descriptor, get HVA through iovec. For used ring update, translate its GIOVA to HVA 2) traverse the GPA->HVA mapping to get the possible GPA and log through GPA. Pay attention this reverse mapping is not guaranteed to be unique, so we should log each possible GPA in this case. This fix the failure of scp to guest during migration. In -next, we will probably support passing GIOVA->GPA instead of GIOVA->HVA. Fixes: 6b1e6cc7855b ("vhost: new device IOTLB API") Reported-by: Jintack Lim <jintack@cs.columbia.edu> Cc: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/vhost/net.c | 3 + drivers/vhost/vhost.c | 97 ++++++++++++++++++++++++++++++++++++++++++-------- drivers/vhost/vhost.h | 3 + 3 files changed, 87 insertions(+), 16 deletions(-) --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -851,7 +851,8 @@ static void handle_rx(struct vhost_net * vhost_add_used_and_signal_n(&net->dev, vq, vq->heads, headcount); if (unlikely(vq_log)) - vhost_log_write(vq, vq_log, log, vhost_len); + vhost_log_write(vq, vq_log, log, vhost_len, + vq->iov, in); total_len += vhost_len; if (unlikely(total_len >= VHOST_NET_WEIGHT)) { vhost_poll_queue(&vq->poll); --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -1726,13 +1726,87 @@ static int log_write(void __user *log_ba return r; } +static int log_write_hva(struct vhost_virtqueue *vq, u64 hva, u64 len) +{ + struct vhost_umem *umem = vq->umem; + struct vhost_umem_node *u; + u64 start, end, l, min; + int r; + bool hit = false; + + while (len) { + min = len; + /* More than one GPAs can be mapped into a single HVA. So + * iterate all possible umems here to be safe. + */ + list_for_each_entry(u, &umem->umem_list, link) { + if (u->userspace_addr > hva - 1 + len || + u->userspace_addr - 1 + u->size < hva) + continue; + start = max(u->userspace_addr, hva); + end = min(u->userspace_addr - 1 + u->size, + hva - 1 + len); + l = end - start + 1; + r = log_write(vq->log_base, + u->start + start - u->userspace_addr, + l); + if (r < 0) + return r; + hit = true; + min = min(l, min); + } + + if (!hit) + return -EFAULT; + + len -= min; + hva += min; + } + + return 0; +} + +static int log_used(struct vhost_virtqueue *vq, u64 used_offset, u64 len) +{ + struct iovec iov[64]; + int i, ret; + + if (!vq->iotlb) + return log_write(vq->log_base, vq->log_addr + used_offset, len); + + ret = translate_desc(vq, (uintptr_t)vq->used + used_offset, + len, iov, 64, VHOST_ACCESS_WO); + if (ret) + return ret; + + for (i = 0; i < ret; i++) { + ret = log_write_hva(vq, (uintptr_t)iov[i].iov_base, + iov[i].iov_len); + if (ret) + return ret; + } + + return 0; +} + int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log, - unsigned int log_num, u64 len) + unsigned int log_num, u64 len, struct iovec *iov, int count) { int i, r; /* Make sure data written is seen before log. */ smp_wmb(); + + if (vq->iotlb) { + for (i = 0; i < count; i++) { + r = log_write_hva(vq, (uintptr_t)iov[i].iov_base, + iov[i].iov_len); + if (r < 0) + return r; + } + return 0; + } + for (i = 0; i < log_num; ++i) { u64 l = min(log[i].len, len); r = log_write(vq->log_base, log[i].addr, l); @@ -1762,9 +1836,8 @@ static int vhost_update_used_flags(struc smp_wmb(); /* Log used flag write. */ used = &vq->used->flags; - log_write(vq->log_base, vq->log_addr + - (used - (void __user *)vq->used), - sizeof vq->used->flags); + log_used(vq, (used - (void __user *)vq->used), + sizeof vq->used->flags); if (vq->log_ctx) eventfd_signal(vq->log_ctx, 1); } @@ -1782,9 +1855,8 @@ static int vhost_update_avail_event(stru smp_wmb(); /* Log avail event write */ used = vhost_avail_event(vq); - log_write(vq->log_base, vq->log_addr + - (used - (void __user *)vq->used), - sizeof *vhost_avail_event(vq)); + log_used(vq, (used - (void __user *)vq->used), + sizeof *vhost_avail_event(vq)); if (vq->log_ctx) eventfd_signal(vq->log_ctx, 1); } @@ -2189,10 +2261,8 @@ static int __vhost_add_used_n(struct vho /* Make sure data is seen before log. */ smp_wmb(); /* Log used ring entry write. */ - log_write(vq->log_base, - vq->log_addr + - ((void __user *)used - (void __user *)vq->used), - count * sizeof *used); + log_used(vq, ((void __user *)used - (void __user *)vq->used), + count * sizeof *used); } old = vq->last_used_idx; new = (vq->last_used_idx += count); @@ -2234,9 +2304,8 @@ int vhost_add_used_n(struct vhost_virtqu /* Make sure used idx is seen before log. */ smp_wmb(); /* Log used index update. */ - log_write(vq->log_base, - vq->log_addr + offsetof(struct vring_used, idx), - sizeof vq->used->idx); + log_used(vq, offsetof(struct vring_used, idx), + sizeof vq->used->idx); if (vq->log_ctx) eventfd_signal(vq->log_ctx, 1); } --- a/drivers/vhost/vhost.h +++ b/drivers/vhost/vhost.h @@ -208,7 +208,8 @@ bool vhost_vq_avail_empty(struct vhost_d bool vhost_enable_notify(struct vhost_dev *, struct vhost_virtqueue *); int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log, - unsigned int log_num, u64 len); + unsigned int log_num, u64 len, + struct iovec *iov, int count); int vq_iotlb_prefetch(struct vhost_virtqueue *vq); struct vhost_msg_node *vhost_new_msg(struct vhost_virtqueue *vq, int type);
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Ido Schimmel <idosch@mellanox.com> [ Upstream commit f97f4dd8b3bb9d0993d2491e0f22024c68109184 ] IPv4 routing tables are flushed in two cases: 1. In response to events in the netdev and inetaddr notification chains 2. When a network namespace is being dismantled In both cases only routes associated with a dead nexthop group are flushed. However, a nexthop group will only be marked as dead in case it is populated with actual nexthops using a nexthop device. This is not the case when the route in question is an error route (e.g., 'blackhole', 'unreachable'). Therefore, when a network namespace is being dismantled such routes are not flushed and leaked [1]. To reproduce: # ip netns add blue # ip -n blue route add unreachable 192.0.2.0/24 # ip netns del blue Fix this by not skipping error routes that are not marked with RTNH_F_DEAD when flushing the routing tables. To prevent the flushing of such routes in case #1, add a parameter to fib_table_flush() that indicates if the table is flushed as part of namespace dismantle or not. Note that this problem does not exist in IPv6 since error routes are associated with the loopback device. [1] unreferenced object 0xffff888066650338 (size 56): comm "ip", pid 1206, jiffies 4294786063 (age 26.235s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 b0 1c 62 61 80 88 ff ff ..........ba.... e8 8b a1 64 80 88 ff ff 00 07 00 08 fe 00 00 00 ...d............ backtrace: [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220 [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20 [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380 [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690 [<0000000014f62875>] netlink_sendmsg+0x929/0xe10 [<00000000bac9d967>] sock_sendmsg+0xc8/0x110 [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0 [<000000002e94f880>] __sys_sendmsg+0xf7/0x250 [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610 [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000003a8b605b>] 0xffffffffffffffff unreferenced object 0xffff888061621c88 (size 48): comm "ip", pid 1206, jiffies 4294786063 (age 26.235s) hex dump (first 32 bytes): 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b d8 8e 26 5f 80 88 ff ff kkkkkkkk..&_.... backtrace: [<00000000733609e3>] fib_table_insert+0x978/0x1500 [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220 [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20 [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380 [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690 [<0000000014f62875>] netlink_sendmsg+0x929/0xe10 [<00000000bac9d967>] sock_sendmsg+0xc8/0x110 [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0 [<000000002e94f880>] __sys_sendmsg+0xf7/0x250 [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610 [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000003a8b605b>] 0xffffffffffffffff Fixes: 8cced9eff1d4 ("[NETNS]: Enable routing configuration in non-initial namespace.") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- include/net/ip_fib.h | 2 +- net/ipv4/fib_frontend.c | 4 ++-- net/ipv4/fib_trie.c | 15 ++++++++++++--- 3 files changed, 15 insertions(+), 6 deletions(-) --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -233,7 +233,7 @@ int fib_table_delete(struct net *, struc struct netlink_ext_ack *extack); int fib_table_dump(struct fib_table *table, struct sk_buff *skb, struct netlink_callback *cb); -int fib_table_flush(struct net *net, struct fib_table *table); +int fib_table_flush(struct net *net, struct fib_table *table, bool flush_all); struct fib_table *fib_trie_unmerge(struct fib_table *main_tb); void fib_table_flush_external(struct fib_table *table); void fib_free_table(struct fib_table *tb); --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -193,7 +193,7 @@ static void fib_flush(struct net *net) struct fib_table *tb; hlist_for_each_entry_safe(tb, tmp, head, tb_hlist) - flushed += fib_table_flush(net, tb); + flushed += fib_table_flush(net, tb, false); } if (flushed) @@ -1299,7 +1299,7 @@ static void ip_fib_net_exit(struct net * hlist_for_each_entry_safe(tb, tmp, head, tb_hlist) { hlist_del(&tb->tb_hlist); - fib_table_flush(net, tb); + fib_table_flush(net, tb, true); fib_free_table(tb); } } --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -1836,7 +1836,7 @@ void fib_table_flush_external(struct fib } /* Caller must hold RTNL. */ -int fib_table_flush(struct net *net, struct fib_table *tb) +int fib_table_flush(struct net *net, struct fib_table *tb, bool flush_all) { struct trie *t = (struct trie *)tb->tb_data; struct key_vector *pn = t->kv; @@ -1884,8 +1884,17 @@ int fib_table_flush(struct net *net, str hlist_for_each_entry_safe(fa, tmp, &n->leaf, fa_list) { struct fib_info *fi = fa->fa_info; - if (!fi || !(fi->fib_flags & RTNH_F_DEAD) || - tb->tb_id != fa->tb_id) { + if (!fi || tb->tb_id != fa->tb_id || + (!(fi->fib_flags & RTNH_F_DEAD) && + !fib_props[fa->fa_type].error)) { + slen = fa->fa_slen; + continue; + } + + /* Do not flush error routes if network namespace is + * not being dismantled + */ + if (!flush_all && fib_props[fa->fa_type].error) { slen = fa->fa_slen; continue; }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Willem de Bruijn <willemb@google.com> [ Upstream commit 13d7f46386e060df31b727c9975e38306fa51e7a ] TCP transmission with MSG_ZEROCOPY fails if the peer closes its end of the connection and so transitions this socket to CLOSE_WAIT state. Transmission in close wait state is acceptable. Other similar tests in the stack (e.g., in FastOpen) accept both states. Relax this test, too. Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg276886.html Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg227390.html Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY") Reported-by: Marek Majkowski <marek@cloudflare.com> Signed-off-by: Willem de Bruijn <willemb@google.com> CC: Yuchung Cheng <ycheng@google.com> CC: Neal Cardwell <ncardwell@google.com> CC: Soheil Hassas Yeganeh <soheil@google.com> CC: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1178,7 +1178,7 @@ int tcp_sendmsg_locked(struct sock *sk, flags = msg->msg_flags; if (flags & MSG_ZEROCOPY && size && sock_flag(sk, SOCK_ZEROCOPY)) { - if (sk->sk_state != TCP_ESTABLISHED) { + if ((1 << sk->sk_state) & ~(TCPF_ESTABLISHED | TCPF_CLOSE_WAIT)) { err = -EINVAL; goto out_err; }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ [ Upstream commit f6f2a4a2eb92bc73671204198bb2f8ab53ff59fb ] Setting the low threshold to 0 has no effect on frags allocation, we need to clear high_thresh instead. The code was pre-existent to commit 648700f76b03 ("inet: frags: use rhashtables for reassembly units"), but before the above, such assignment had a different role: prevent concurrent eviction from the worker and the netns cleanup helper. Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- net/ipv4/inet_fragment.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -90,7 +90,7 @@ static void inet_frags_free_cb(void *ptr void inet_frags_exit_net(struct netns_frags *nf) { - nf->low_thresh = 0; /* prevent creation of new frags */ + nf->high_thresh = 0; /* prevent creation of new frags */ rhashtable_free_and_destroy(&nf->rhashtable, inet_frags_free_cb, NULL); }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ commit 99d570da309813f67e9c741edeff55bafc6c1d5e upstream. Enable CONFIG_MMC_SDHCI_IO_ACCESSORS so that SDHC controller specific register read and write APIs, if registered, can be used. Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Koen Vandeputte <koen.vandeputte@ncentric.com> Cc: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/mmc/host/Kconfig | 1 + 1 file changed, 1 insertion(+) --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -429,6 +429,7 @@ config MMC_SDHCI_MSM tristate "Qualcomm SDHCI Controller Support" depends on ARCH_QCOM || (ARM && COMPILE_TEST) depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS help This selects the Secure Digital Host Controller Interface (SDHCI) support present in Qualcomm SOCs. The controller supports
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Tomas Winkler <tomas.winkler@intel.com> commit f7ee8ead151f9d0b8dac6ab6c3ff49bbe809c564 upstream. Add the Denverton innovation engine (IE) device ids. The IE is an ME-like device which provides HW security offloading. Cc: <stable@vger.kernel.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/misc/mei/hw-me-regs.h | 2 ++ drivers/misc/mei/pci-me.c | 2 ++ 2 files changed, 4 insertions(+) --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -127,6 +127,8 @@ #define MEI_DEV_ID_BXT_M 0x1A9A /* Broxton M */ #define MEI_DEV_ID_APL_I 0x5A9A /* Apollo Lake I */ +#define MEI_DEV_ID_DNV_IE 0x19E5 /* Denverton IE */ + #define MEI_DEV_ID_GLK 0x319A /* Gemini Lake */ #define MEI_DEV_ID_KBP 0xA2BA /* Kaby Point */ --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -93,6 +93,8 @@ static const struct pci_device_id mei_me {MEI_PCI_DEVICE(MEI_DEV_ID_BXT_M, MEI_ME_PCH8_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_APL_I, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_DNV_IE, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_GLK, MEI_ME_PCH8_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_KBP, MEI_ME_PCH8_CFG)},
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Max Schulze <max.schulze@posteo.de> commit b81c2c33eab79dfd3650293b2227ee5c6036585c upstream. Add new Motorola Tetra device id for Motorola Solutions TETRA PEI device T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0cad ProdID=9016 Rev=24.16 S: Manufacturer=Motorola Solutions, Inc. S: Product=TETRA PEI interface C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple Signed-off-by: Max Schulze <max.schulze@posteo.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/serial/usb-serial-simple.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -88,7 +88,8 @@ DEVICE(moto_modem, MOTO_IDS); /* Motorola Tetra driver */ #define MOTOROLA_TETRA_IDS() \ { USB_DEVICE(0x0cad, 0x9011) }, /* Motorola Solutions TETRA PEI */ \ - { USB_DEVICE(0x0cad, 0x9012) } /* MTP6550 */ + { USB_DEVICE(0x0cad, 0x9012) }, /* MTP6550 */ \ + { USB_DEVICE(0x0cad, 0x9016) } /* TPG2200 */ DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS); /* Novatel Wireless GPS driver */
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Charles Yeh <charlesyeh522@gmail.com> commit 4dcf9ddc9ad5ab649abafa98c5a4d54b1a33dabb upstream. Add new PID to support PL2303TB (TYPE_HX) Signed-off-by: Charles Yeh <charlesyeh522@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 2 ++ 2 files changed, 3 insertions(+) --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -49,6 +49,7 @@ static const struct usb_device_id id_tab { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_TB) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID), --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -13,6 +13,7 @@ #define PL2303_VENDOR_ID 0x067b #define PL2303_PRODUCT_ID 0x2303 +#define PL2303_PRODUCT_ID_TB 0x2304 #define PL2303_PRODUCT_ID_RSAQ2 0x04bb #define PL2303_PRODUCT_ID_DCU11 0x1234 #define PL2303_PRODUCT_ID_PHAROS 0xaaa0 @@ -25,6 +26,7 @@ #define PL2303_PRODUCT_ID_MOTOROLA 0x0307 #define PL2303_PRODUCT_ID_ZTEK 0xe1f1 + #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 #define ATEN_PRODUCT_ID 0x2008
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Kangjie Lu <kjlu@umn.edu> commit 44fabd8cdaaa3acb80ad2bb3b5c61ae2136af661 upstream. snd_pcm_lib_malloc_pages() may fail, so let's check its status and return its error code upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- sound/soc/intel/atom/sst-mfld-platform-pcm.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) --- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c +++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c @@ -399,7 +399,13 @@ static int sst_media_hw_params(struct sn struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { - snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); + int ret; + + ret = + snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(params)); + if (ret) + return ret; memset(substream->runtime->dma_area, 0, params_buffer_bytes(params)); return 0; }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Gustavo A. R. Silva <gustavo@embeddedor.com> commit 060d0bf491874daece47053c4e1fb0489eb867d2 upstream. There is a potential NULL pointer dereference in case devm_kzalloc() fails and returns NULL. Fix this by adding a NULL check on rt5514_dsp. This issue was detected with the help of Coccinelle. Fixes: 6eebf35b0e4a ("ASoC: rt5514: add rt5514 SPI driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- sound/soc/codecs/rt5514-spi.c | 2 ++ 1 file changed, 2 insertions(+) --- a/sound/soc/codecs/rt5514-spi.c +++ b/sound/soc/codecs/rt5514-spi.c @@ -265,6 +265,8 @@ static int rt5514_spi_pcm_probe(struct s rt5514_dsp = devm_kzalloc(platform->dev, sizeof(*rt5514_dsp), GFP_KERNEL); + if (!rt5514_dsp) + return -ENOMEM; rt5514_dsp->dev = &rt5514_spi->dev; mutex_init(&rt5514_dsp->dma_lock);
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Anthony Wong <anthony.wong@canonical.com> commit 699390381a7bae2fab01a22f742a17235c44ed8a upstream. Support speaker and mic mute LEDs on HP ProBook 470 G5. BugLink: https://bugs.launchpad.net/bugs/1811254 Signed-off-by: Anthony Wong <anthony.wong@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+) --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -969,6 +969,7 @@ static const struct snd_pci_quirk cxt506 SND_PCI_QUIRK(0x103c, 0x814f, "HP ZBook 15u G3", CXT_FIXUP_MUTE_LED_GPIO), SND_PCI_QUIRK(0x103c, 0x822e, "HP ProBook 440 G4", CXT_FIXUP_MUTE_LED_GPIO), SND_PCI_QUIRK(0x103c, 0x836e, "HP ProBook 455 G5", CXT_FIXUP_MUTE_LED_GPIO), + SND_PCI_QUIRK(0x103c, 0x837f, "HP ProBook 470 G5", CXT_FIXUP_MUTE_LED_GPIO), SND_PCI_QUIRK(0x103c, 0x8299, "HP 800 G3 SFF", CXT_FIXUP_HP_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x829a, "HP 800 G3 DM", CXT_FIXUP_HP_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x8455, "HP Z2 G4", CXT_FIXUP_HP_MIC_NO_PRESENCE),
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> commit e6a72b7daeeb521753803550f0ed711152bb2555 upstream. ARCv2 optimized memset uses PREFETCHW instruction for prefetching the next cache line but doesn't ensure that the line is not past the end of the buffer. PRETECHW changes the line ownership and marks it dirty, which can cause issues in SMP config when next line was already owned by other core. Fix the issue by avoiding the PREFETCHW Some more details: The current code has 3 logical loops (ignroing the unaligned part) (a) Big loop for doing aligned 64 bytes per iteration with PREALLOC (b) Loop for 32 x 2 bytes with PREFETCHW (c) any left over bytes loop (a) was already eliding the last 64 bytes, so PREALLOC was safe. The fix was removing PREFETCW from (b). Another potential issue (applicable to configs with 32 or 128 byte L1 cache line) is that PREALLOC assumes 64 byte cache line and may not do the right thing specially for 32b. While it would be easy to adapt, there are no known configs with those lie sizes, so for now, just compile out PREALLOC in such cases. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: stable@vger.kernel.org #4.4+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: rewrote changelog, used asm .macro vs. "C" macro] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/arc/lib/memset-archs.S | 40 ++++++++++++++++++++++++++++++++-------- 1 file changed, 32 insertions(+), 8 deletions(-) --- a/arch/arc/lib/memset-archs.S +++ b/arch/arc/lib/memset-archs.S @@ -7,11 +7,39 @@ */ #include <linux/linkage.h> +#include <asm/cache.h> -#undef PREALLOC_NOT_AVAIL +/* + * The memset implementation below is optimized to use prefetchw and prealloc + * instruction in case of CPU with 64B L1 data cache line (L1_CACHE_SHIFT == 6) + * If you want to implement optimized memset for other possible L1 data cache + * line lengths (32B and 128B) you should rewrite code carefully checking + * we don't call any prefetchw/prealloc instruction for L1 cache lines which + * don't belongs to memset area. + */ + +#if L1_CACHE_SHIFT == 6 + +.macro PREALLOC_INSTR reg, off + prealloc [\reg, \off] +.endm + +.macro PREFETCHW_INSTR reg, off + prefetchw [\reg, \off] +.endm + +#else + +.macro PREALLOC_INSTR +.endm + +.macro PREFETCHW_INSTR +.endm + +#endif ENTRY_CFI(memset) - prefetchw [r0] ; Prefetch the write location + PREFETCHW_INSTR r0, 0 ; Prefetch the first write location mov.f 0, r2 ;;; if size is zero jz.d [blink] @@ -48,11 +76,8 @@ ENTRY_CFI(memset) lpnz @.Lset64bytes ;; LOOP START -#ifdef PREALLOC_NOT_AVAIL - prefetchw [r3, 64] ;Prefetch the next write location -#else - prealloc [r3, 64] -#endif + PREALLOC_INSTR r3, 64 ; alloc next line w/o fetching + #ifdef CONFIG_ARC_HAS_LL64 std.ab r4, [r3, 8] std.ab r4, [r3, 8] @@ -85,7 +110,6 @@ ENTRY_CFI(memset) lsr.f lp_count, r2, 5 ;Last remaining max 124 bytes lpnz .Lset32bytes ;; LOOP START - prefetchw [r3, 32] ;Prefetch the next write location #ifdef CONFIG_ARC_HAS_LL64 std.ab r4, [r3, 8] std.ab r4, [r3, 8]
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> commit a3010a0465383300f909f62b8a83f83ffa7b2517 upstream. In setup_arch_memory we reserve the memory area wherein the kernel is located. Current implementation may reserve more memory than it actually required in case of CONFIG_LINUX_LINK_BASE is not equal to CONFIG_LINUX_RAM_BASE. This happens because we calculate start of the reserved region relatively to the CONFIG_LINUX_RAM_BASE and end of the region relatively to the CONFIG_LINUX_RAM_BASE. For example in case of HSDK board we wasted 256MiB of physical memory: ------------------->8------------------------------ Memory: 770416K/1048576K available (5496K kernel code, 240K rwdata, 1064K rodata, 2200K init, 275K bss, 278160K reserved, 0K cma-reserved) ------------------->8------------------------------ Fix that. Fixes: 9ed68785f7f2b ("ARC: mm: Decouple RAM base address from kernel link addr") Cc: stable@vger.kernel.org #4.14+ Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/arc/mm/init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -138,7 +138,8 @@ void __init setup_arch_memory(void) */ memblock_add_node(low_mem_start, low_mem_sz, 0); - memblock_reserve(low_mem_start, __pa(_end) - low_mem_start); + memblock_reserve(CONFIG_LINUX_LINK_BASE, + __pa(_end) - CONFIG_LINUX_LINK_BASE); #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start)
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> commit 3affbf0e154ee351add6fcc254c59c3f3947fa8f upstream. So far we've mapped branches to "ijmp" which also counts conditional branches NOT taken. This makes us different from other architectures such as ARM which seem to be counting only taken branches. So use "ijmptak" hardware condition which only counts (all jump instructions that are taken) 'ijmptak' event is available on both ARCompact and ARCv2 ISA based cores. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked changelog] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/arc/include/asm/perf_event.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/arch/arc/include/asm/perf_event.h +++ b/arch/arc/include/asm/perf_event.h @@ -103,7 +103,8 @@ static const char * const arc_pmu_ev_hw_ /* counts condition */ [PERF_COUNT_HW_INSTRUCTIONS] = "iall", - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp", /* Excludes ZOL jumps */ + /* All jump instructions that are taken */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak", [PERF_COUNT_ARC_BPOK] = "bpok", /* NP-NT, PT-T, PNT-NT */ #ifdef CONFIG_ISA_ARCV2 [PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Christian Borntraeger <borntraeger@de.ibm.com> commit 03aa047ef2db4985e444af6ee1c1dd084ad9fb4c upstream. Right now the early machine detection code check stsi 3.2.2 for "KVM" and set MACHINE_IS_VM if this is different. As the console detection uses diagnose 8 if MACHINE_IS_VM returns true this will crash Linux early for any non z/VM system that sets a different value than KVM. So instead of assuming z/VM, do not set any of MACHINE_IS_LPAR, MACHINE_IS_VM, or MACHINE_IS_KVM. CC: stable@vger.kernel.org Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/s390/kernel/early.c | 4 ++-- arch/s390/kernel/setup.c | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -226,10 +226,10 @@ static noinline __init void detect_machi if (stsi(vmms, 3, 2, 2) || !vmms->count) return; - /* Running under KVM? If not we assume z/VM */ + /* Detect known hypervisors */ if (!memcmp(vmms->vm[0].cpi, "\xd2\xe5\xd4", 3)) S390_lowcore.machine_flags |= MACHINE_FLAG_KVM; - else + else if (!memcmp(vmms->vm[0].cpi, "\xa9\x61\xe5\xd4", 4)) S390_lowcore.machine_flags |= MACHINE_FLAG_VM; } --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -884,6 +884,8 @@ void __init setup_arch(char **cmdline_p) pr_info("Linux is running under KVM in 64-bit mode\n"); else if (MACHINE_IS_LPAR) pr_info("Linux is running natively in 64-bit mode\n"); + else + pr_info("Linux is running as a guest in 64-bit mode\n"); /* Have one command line that is parsed and saved in /proc/cmdline */ /* boot_command_line has been already set up in early.c */
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Gerald Schaefer <gerald.schaefer@de.ibm.com> commit b7cb707c373094ce4008d4a6ac9b6b366ec52da5 upstream. smp_rescan_cpus() is called without the device_hotplug_lock, which can lead to a dedlock when a new CPU is found and immediately set online by a udev rule. This was observed on an older kernel version, where the cpu_hotplug_begin() loop was still present, and it resulted in hanging chcpu and systemd-udev processes. This specific deadlock will not show on current kernels. However, there may be other possible deadlocks, and since smp_rescan_cpus() can still trigger a CPU hotplug operation, the device_hotplug_lock should be held. For reference, this was the deadlock with the old cpu_hotplug_begin() loop: chcpu (rescan) systemd-udevd echo 1 > /sys/../rescan -> smp_rescan_cpus() -> (*) get_online_cpus() (increases refcount) -> smp_add_present_cpu() (new CPU found) -> register_cpu() -> device_add() -> udev "add" event triggered -----------> udev rule sets CPU online -> echo 1 > /sys/.../online -> lock_device_hotplug_sysfs() (this is missing in rescan path) -> device_online() -> (**) device_lock(new CPU dev) -> cpu_up() -> cpu_hotplug_begin() (loops until refcount == 0) -> deadlock with (*) -> bus_probe_device() -> device_attach() -> device_lock(new CPU dev) -> deadlock with (**) Fix this by taking the device_hotplug_lock in the CPU rescan path. Cc: <stable@vger.kernel.org> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/s390/kernel/smp.c | 4 ++++ drivers/s390/char/sclp_config.c | 2 ++ 2 files changed, 6 insertions(+) --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -1168,7 +1168,11 @@ static ssize_t __ref rescan_store(struct { int rc; + rc = lock_device_hotplug_sysfs(); + if (rc) + return rc; rc = smp_rescan_cpus(); + unlock_device_hotplug(); return rc ? rc : count; } static DEVICE_ATTR(rescan, 0200, NULL, rescan_store); --- a/drivers/s390/char/sclp_config.c +++ b/drivers/s390/char/sclp_config.c @@ -60,7 +60,9 @@ static void sclp_cpu_capability_notify(s static void __ref sclp_cpu_change_notify(struct work_struct *work) { + lock_device_hotplug(); smp_rescan_cpus(); + unlock_device_hotplug(); } static void sclp_conf_receiver_fn(struct evbuf_header *evbuf)
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Gustavo A. R. Silva <gustavo@embeddedor.com> commit 701956d4018e5d5438570e39e8bda47edd32c489 upstream. ipcnum is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/char/mwave/mwavedd.c:299 mwave_ioctl() warn: potential spectre issue 'pDrvData->IPCs' [w] (local cap) Fix this by sanitizing ipcnum before using it to index pDrvData->IPCs. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/char/mwave/mwavedd.c | 7 +++++++ 1 file changed, 7 insertions(+) --- a/drivers/char/mwave/mwavedd.c +++ b/drivers/char/mwave/mwavedd.c @@ -59,6 +59,7 @@ #include <linux/mutex.h> #include <linux/delay.h> #include <linux/serial_8250.h> +#include <linux/nospec.h> #include "smapi.h" #include "mwavedd.h" #include "3780i.h" @@ -289,6 +290,8 @@ static long mwave_ioctl(struct file *fil ipcnum); return -EINVAL; } + ipcnum = array_index_nospec(ipcnum, + ARRAY_SIZE(pDrvData->IPCs)); PRINTK_3(TRACE_MWAVE, "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC" " ipcnum %x entry usIntCount %x\n", @@ -317,6 +320,8 @@ static long mwave_ioctl(struct file *fil " Invalid ipcnum %x\n", ipcnum); return -EINVAL; } + ipcnum = array_index_nospec(ipcnum, + ARRAY_SIZE(pDrvData->IPCs)); PRINTK_3(TRACE_MWAVE, "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC" " ipcnum %x, usIntCount %x\n", @@ -383,6 +388,8 @@ static long mwave_ioctl(struct file *fil ipcnum); return -EINVAL; } + ipcnum = array_index_nospec(ipcnum, + ARRAY_SIZE(pDrvData->IPCs)); mutex_lock(&mwave_mutex); if (pDrvData->IPCs[ipcnum].bIsEnabled == true) { pDrvData->IPCs[ipcnum].bIsEnabled = false;
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Michael Straube <straube.linux@gmail.com> commit 5f74a8cbb38d10615ed46bc3e37d9a4c9af8045a upstream. This device was added to the stand-alone driver on github. Add it to the staging driver as well. Link: https://github.com/lwfinger/rtl8188eu/commit/a0619a07cd1e Signed-off-by: Michael Straube <straube.linux@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c +++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c @@ -43,6 +43,7 @@ static const struct usb_device_id rtw_us {USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */ {USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */ {USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */ + {USB_DEVICE(0x2001, 0x331B)}, /* D-Link DWA-121 rev B1 */ {USB_DEVICE(0x2357, 0x010c)}, /* TP-Link TL-WN722N v2 */ {USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0xffef)}, /* Rosewill RNX-N150NUB */
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> commit 27cfb3a53be46a54ec5e0bd04e51995b74c90343 upstream. Some tty line disciplines do not have a receive buf callback, so properly check for that before calling it. If they do not have this callback, just eat the character quietly, as we can't fail this call. Reported-by: Jann Horn <jannh@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/tty/tty_io.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2180,7 +2180,8 @@ static int tiocsti(struct tty_struct *tt ld = tty_ldisc_ref_wait(tty); if (!ld) return -EIO; - ld->ops->receive_buf(tty, &ch, &mbz, 1); + if (ld->ops->receive_buf) + ld->ops->receive_buf(tty, &ch, &mbz, 1); tty_ldisc_deref(ld); return 0; }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Samir Virmani <samir@embedur.com> commit aff9cf5955185d1f183227e46c5f8673fa483813 upstream. We were experiencing a crash similar to the one reported as part of commit:a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()") in our testbed as well. We continue to observe the same crash after integrating the commit a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()") On reviewing the change, the port lock should be taken prior to checking for if (!circ->buf) in fn. __uart_put_char and other fns. that update the buffer uart_state->xmit. Traceback: [11/27/2018 06:24:32.4870] Unable to handle kernel NULL pointer dereference at virtual address 0000003b [11/27/2018 06:24:32.4950] PC is at memcpy+0x48/0x180 [11/27/2018 06:24:32.4950] LR is at uart_write+0x74/0x120 [11/27/2018 06:24:32.4950] pc : [<ffffffc0002e6808>] lr : [<ffffffc0003747cc>] pstate: 000001c5 [11/27/2018 06:24:32.4950] sp : ffffffc076433d30 [11/27/2018 06:24:32.4950] x29: ffffffc076433d30 x28: 0000000000000140 [11/27/2018 06:24:32.4950] x27: ffffffc0009b9d5e x26: ffffffc07ce36580 [11/27/2018 06:24:32.4950] x25: 0000000000000000 x24: 0000000000000140 [11/27/2018 06:24:32.4950] x23: ffffffc000891200 x22: ffffffc01fc34000 [11/27/2018 06:24:32.4950] x21: 0000000000000fff x20: 0000000000000076 [11/27/2018 06:24:32.4950] x19: 0000000000000076 x18: 0000000000000000 [11/27/2018 06:24:32.4950] x17: 000000000047cf08 x16: ffffffc000099e68 [11/27/2018 06:24:32.4950] x15: 0000000000000018 x14: 776d726966205948 [11/27/2018 06:24:32.4950] x13: 50203a6c6974755f x12: 74647075205d3333 [11/27/2018 06:24:32.4950] x11: 3a35323a36203831 x10: 30322f37322f3131 [11/27/2018 06:24:32.4950] x9 : 5b205d303638342e x8 : 746164206f742070 [11/27/2018 06:24:32.4950] x7 : 7520736920657261 x6 : 000000000000003b [11/27/2018 06:24:32.4950] x5 : 000000000000817a x4 : 0000000000000008 [11/27/2018 06:24:32.4950] x3 : 2f37322f31312a5b x2 : 000000000000006e [11/27/2018 06:24:32.4950] x1 : ffffffc0009b9cf0 x0 : 000000000000003b [11/27/2018 06:24:32.4950] CPU2: stopping [11/27/2018 06:24:32.4950] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P D O 4.1.51 #3 [11/27/2018 06:24:32.4950] Hardware name: Broadcom-v8A (DT) [11/27/2018 06:24:32.4950] Call trace: [11/27/2018 06:24:32.4950] [<ffffffc0000883b8>] dump_backtrace+0x0/0x150 [11/27/2018 06:24:32.4950] [<ffffffc00008851c>] show_stack+0x14/0x20 [11/27/2018 06:24:32.4950] [<ffffffc0005ee810>] dump_stack+0x90/0xb0 [11/27/2018 06:24:32.4950] [<ffffffc00008e844>] handle_IPI+0x18c/0x1a0 [11/27/2018 06:24:32.4950] [<ffffffc000080c68>] gic_handle_irq+0x88/0x90 Fixes: a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Samir Virmani <samir@embedur.com> Acked-by: Tycho Andersen <tycho@tycho.ws> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/tty/serial/serial_core.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -563,10 +563,12 @@ static int uart_put_char(struct tty_stru int ret = 0; circ = &state->xmit; - if (!circ->buf) + port = uart_port_lock(state, flags); + if (!circ->buf) { + uart_port_unlock(port, flags); return 0; + } - port = uart_port_lock(state, flags); if (port && uart_circ_chars_free(circ) != 0) { circ->buf[circ->head] = c; circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1); @@ -599,11 +601,13 @@ static int uart_write(struct tty_struct return -EL3HLT; } + port = uart_port_lock(state, flags); circ = &state->xmit; - if (!circ->buf) + if (!circ->buf) { + uart_port_unlock(port, flags); return 0; + } - port = uart_port_lock(state, flags); while (port) { c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE); if (count < c)
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Paul Fulghum <paulkf@microgate.com> commit fc01d8c61ce02c034e67378cd3e645734bc18c8c upstream. Fix __might_sleep warning[1] in tty/n_hdlc.c read due to copy_to_user call while current is TASK_INTERRUPTIBLE. This is a false positive since the code path does not depend on current state remaining TASK_INTERRUPTIBLE. The loop breaks out and sets TASK_RUNNING after calling copy_to_user. This patch supresses the warning by setting TASK_RUNNING before calling copy_to_user. [1] https://syzkaller.appspot.com/bug?id=17d5de7f1fcab794cb8c40032f893f52de899324 Signed-off-by: Paul Fulghum <paulkf@microgate.com> Reported-by: syzbot <syzbot+c244af085a0159d22879@syzkaller.appspotmail.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/tty/n_hdlc.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -598,6 +598,7 @@ static ssize_t n_hdlc_tty_read(struct tt /* too large for caller's buffer */ ret = -EOVERFLOW; } else { + __set_current_state(TASK_RUNNING); if (copy_to_user(buf, rbuf->buf, rbuf->count)) ret = -EFAULT; else
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Vitaly Kuznetsov <vkuznets@redhat.com> commit da8ced360ca8ad72d8f41f5c8fcd5b0e63e1555f upstream. Hyper-V memory hotplug protocol has 2M granularity and in Linux x86 we use 128M. To deal with it we implement partial section onlining by registering custom page onlining callback (hv_online_page()). Later, when more memory arrives we try to online the 'tail' (see hv_bring_pgs_online()). It was found that in some cases this 'tail' onlining causes issues: BUG: Bad page state in process kworker/0:2 pfn:109e3a page:ffffe08344278e80 count:0 mapcount:1 mapping:0000000000000000 index:0x0 flags: 0xfffff80000000() raw: 000fffff80000000 dead000000000100 dead000000000200 0000000000000000 raw: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 page dumped because: nonzero mapcount ... Workqueue: events hot_add_req [hv_balloon] Call Trace: dump_stack+0x5c/0x80 bad_page.cold.112+0x7f/0xb2 free_pcppages_bulk+0x4b8/0x690 free_unref_page+0x54/0x70 hv_page_online_one+0x5c/0x80 [hv_balloon] hot_add_req.cold.24+0x182/0x835 [hv_balloon] ... Turns out that we now have deferred struct page initialization for memory hotplug so e.g. memory_block_action() in drivers/base/memory.c does pages_correctly_probed() check and in that check it avoids inspecting struct pages and checks sections instead. But in Hyper-V balloon driver we do PageReserved(pfn_to_page()) check and this is now wrong. Switch to checking online_section_nr() instead. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/hv/hv_balloon.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) --- a/drivers/hv/hv_balloon.c +++ b/drivers/hv/hv_balloon.c @@ -846,12 +846,14 @@ static unsigned long handle_pg_range(uns pfn_cnt -= pgs_ol; /* * Check if the corresponding memory block is already - * online by checking its last previously backed page. - * In case it is we need to bring rest (which was not - * backed previously) online too. + * online. It is possible to observe struct pages still + * being uninitialized here so check section instead. + * In case the section is online we need to bring the + * rest of pfns (which were not backed previously) + * online too. */ if (start_pfn > has->start_pfn && - !PageReserved(pfn_to_page(start_pfn - 1))) + online_section_nr(pfn_to_section_nr(start_pfn))) hv_bring_pgs_online(has, start_pfn, pgs_ol); }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Dexuan Cui <decui@microsoft.com> commit ba50bf1ce9a51fc97db58b96d01306aa70bc3979 upstream. fc96df16a1ce is good and can already fix the "return stack garbage" issue, but let's also improve hv_ringbuffer_get_debuginfo(), which would silently return stack garbage, if people forget to check channel->state or ring_info->ring_buffer, when using the function in the future. Having an error check in the function would eliminate the potential risk. Add a Fixes tag to indicate the patch depdendency. Fixes: fc96df16a1ce ("Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels") Cc: stable@vger.kernel.org Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/hv/ring_buffer.c | 29 +++++++------- drivers/hv/vmbus_drv.c | 91 +++++++++++++++++++++++++++++++---------------- include/linux/hyperv.h | 5 +- 3 files changed, 78 insertions(+), 47 deletions(-) --- a/drivers/hv/ring_buffer.c +++ b/drivers/hv/ring_buffer.c @@ -141,26 +141,25 @@ static u32 hv_copyto_ringbuffer( } /* Get various debug metrics for the specified ring buffer. */ -void hv_ringbuffer_get_debuginfo(const struct hv_ring_buffer_info *ring_info, - struct hv_ring_buffer_debug_info *debug_info) +int hv_ringbuffer_get_debuginfo(const struct hv_ring_buffer_info *ring_info, + struct hv_ring_buffer_debug_info *debug_info) { u32 bytes_avail_towrite; u32 bytes_avail_toread; - if (ring_info->ring_buffer) { - hv_get_ringbuffer_availbytes(ring_info, - &bytes_avail_toread, - &bytes_avail_towrite); + if (!ring_info->ring_buffer) + return -EINVAL; - debug_info->bytes_avail_toread = bytes_avail_toread; - debug_info->bytes_avail_towrite = bytes_avail_towrite; - debug_info->current_read_index = - ring_info->ring_buffer->read_index; - debug_info->current_write_index = - ring_info->ring_buffer->write_index; - debug_info->current_interrupt_mask = - ring_info->ring_buffer->interrupt_mask; - } + hv_get_ringbuffer_availbytes(ring_info, + &bytes_avail_toread, + &bytes_avail_towrite); + debug_info->bytes_avail_toread = bytes_avail_toread; + debug_info->bytes_avail_towrite = bytes_avail_towrite; + debug_info->current_read_index = ring_info->ring_buffer->read_index; + debug_info->current_write_index = ring_info->ring_buffer->write_index; + debug_info->current_interrupt_mask + = ring_info->ring_buffer->interrupt_mask; + return 0; } EXPORT_SYMBOL_GPL(hv_ringbuffer_get_debuginfo); --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -297,12 +297,16 @@ static ssize_t out_intr_mask_show(struct { struct hv_device *hv_dev = device_to_hv_device(dev); struct hv_ring_buffer_debug_info outbound; + int ret; if (!hv_dev->channel) return -ENODEV; - if (hv_dev->channel->state != CHANNEL_OPENED_STATE) - return -EINVAL; - hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound); + + ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, + &outbound); + if (ret < 0) + return ret; + return sprintf(buf, "%d\n", outbound.current_interrupt_mask); } static DEVICE_ATTR_RO(out_intr_mask); @@ -312,12 +316,15 @@ static ssize_t out_read_index_show(struc { struct hv_device *hv_dev = device_to_hv_device(dev); struct hv_ring_buffer_debug_info outbound; + int ret; if (!hv_dev->channel) return -ENODEV; - if (hv_dev->channel->state != CHANNEL_OPENED_STATE) - return -EINVAL; - hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound); + + ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, + &outbound); + if (ret < 0) + return ret; return sprintf(buf, "%d\n", outbound.current_read_index); } static DEVICE_ATTR_RO(out_read_index); @@ -328,12 +335,15 @@ static ssize_t out_write_index_show(stru { struct hv_device *hv_dev = device_to_hv_device(dev); struct hv_ring_buffer_debug_info outbound; + int ret; if (!hv_dev->channel) return -ENODEV; - if (hv_dev->channel->state != CHANNEL_OPENED_STATE) - return -EINVAL; - hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound); + + ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, + &outbound); + if (ret < 0) + return ret; return sprintf(buf, "%d\n", outbound.current_write_index); } static DEVICE_ATTR_RO(out_write_index); @@ -344,12 +354,15 @@ static ssize_t out_read_bytes_avail_show { struct hv_device *hv_dev = device_to_hv_device(dev); struct hv_ring_buffer_debug_info outbound; + int ret; if (!hv_dev->channel) return -ENODEV; - if (hv_dev->channel->state != CHANNEL_OPENED_STATE) - return -EINVAL; - hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound); + + ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, + &outbound); + if (ret < 0) + return ret; return sprintf(buf, "%d\n", outbound.bytes_avail_toread); } static DEVICE_ATTR_RO(out_read_bytes_avail); @@ -360,12 +373,15 @@ static ssize_t out_write_bytes_avail_sho { struct hv_device *hv_dev = device_to_hv_device(dev); struct hv_ring_buffer_debug_info outbound; + int ret; if (!hv_dev->channel) return -ENODEV; - if (hv_dev->channel->state != CHANNEL_OPENED_STATE) - return -EINVAL; - hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound); + + ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, + &outbound); + if (ret < 0) + return ret; return sprintf(buf, "%d\n", outbound.bytes_avail_towrite); } static DEVICE_ATTR_RO(out_write_bytes_avail); @@ -375,12 +391,15 @@ static ssize_t in_intr_mask_show(struct { struct hv_device *hv_dev = device_to_hv_device(dev); struct hv_ring_buffer_debug_info inbound; + int ret; if (!hv_dev->channel) return -ENODEV; - if (hv_dev->channel->state != CHANNEL_OPENED_STATE) - return -EINVAL; - hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); + + ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); + if (ret < 0) + return ret; + return sprintf(buf, "%d\n", inbound.current_interrupt_mask); } static DEVICE_ATTR_RO(in_intr_mask); @@ -390,12 +409,15 @@ static ssize_t in_read_index_show(struct { struct hv_device *hv_dev = device_to_hv_device(dev); struct hv_ring_buffer_debug_info inbound; + int ret; if (!hv_dev->channel) return -ENODEV; - if (hv_dev->channel->state != CHANNEL_OPENED_STATE) - return -EINVAL; - hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); + + ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); + if (ret < 0) + return ret; + return sprintf(buf, "%d\n", inbound.current_read_index); } static DEVICE_ATTR_RO(in_read_index); @@ -405,12 +427,15 @@ static ssize_t in_write_index_show(struc { struct hv_device *hv_dev = device_to_hv_device(dev); struct hv_ring_buffer_debug_info inbound; + int ret; if (!hv_dev->channel) return -ENODEV; - if (hv_dev->channel->state != CHANNEL_OPENED_STATE) - return -EINVAL; - hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); + + ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); + if (ret < 0) + return ret; + return sprintf(buf, "%d\n", inbound.current_write_index); } static DEVICE_ATTR_RO(in_write_index); @@ -421,12 +446,15 @@ static ssize_t in_read_bytes_avail_show( { struct hv_device *hv_dev = device_to_hv_device(dev); struct hv_ring_buffer_debug_info inbound; + int ret; if (!hv_dev->channel) return -ENODEV; - if (hv_dev->channel->state != CHANNEL_OPENED_STATE) - return -EINVAL; - hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); + + ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); + if (ret < 0) + return ret; + return sprintf(buf, "%d\n", inbound.bytes_avail_toread); } static DEVICE_ATTR_RO(in_read_bytes_avail); @@ -437,12 +465,15 @@ static ssize_t in_write_bytes_avail_show { struct hv_device *hv_dev = device_to_hv_device(dev); struct hv_ring_buffer_debug_info inbound; + int ret; if (!hv_dev->channel) return -ENODEV; - if (hv_dev->channel->state != CHANNEL_OPENED_STATE) - return -EINVAL; - hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); + + ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); + if (ret < 0) + return ret; + return sprintf(buf, "%d\n", inbound.bytes_avail_towrite); } static DEVICE_ATTR_RO(in_write_bytes_avail); --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -1130,8 +1130,9 @@ struct hv_ring_buffer_debug_info { u32 bytes_avail_towrite; }; -void hv_ringbuffer_get_debuginfo(const struct hv_ring_buffer_info *ring_info, - struct hv_ring_buffer_debug_info *debug_info); + +int hv_ringbuffer_get_debuginfo(const struct hv_ring_buffer_info *ring_info, + struct hv_ring_buffer_debug_info *debug_info); /* Vmbus interface */ #define vmbus_driver_register(driver) \
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Pavel Shilovsky <pshilov@microsoft.com> commit acc58d0bab55a50e02c25f00bd6a210ee121595f upstream. When doing MTU i/o we need to leave some credits for possible reopen requests and other operations happening in parallel. Currently we leave 1 credit which is not enough even for reopen only: we need at least 2 credits if durable handle reconnect fails. Also there may be other operations at the same time including compounding ones which require 3 credits at a time each. Fix this by leaving 8 credits which is big enough to cover most scenarios. Was able to reproduce this when server was configured to give out fewer credits than usual. The proper fix would be to reconnect a file handle first and then obtain credits for an MTU request but this leads to bigger code changes and should happen in other patches. Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- fs/cifs/smb2ops.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -153,14 +153,14 @@ smb2_wait_mtu_credits(struct TCP_Server_ scredits = server->credits; /* can deadlock with reopen */ - if (scredits == 1) { + if (scredits <= 8) { *num = SMB2_MAX_BUFFER_SIZE; *credits = 0; break; } - /* leave one credit for a possible reopen */ - scredits--; + /* leave some credits for reopen and other ops */ + scredits -= 8; *num = min_t(unsigned int, size, scredits * SMB2_MAX_BUFFER_SIZE);
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Pavel Shilovsky <pshilov@microsoft.com> commit 8004c78c68e894e4fd5ac3c22cc22eb7dc24cabc upstream. Currently we mark MID as malformed if we get an error from server in a read response. This leads to not properly processing credits in the readv callback. Fix this by marking such a response as normal received response and process it appropriately. Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- fs/cifs/cifssmb.c | 35 +++++++++++++++++++++++------------ 1 file changed, 23 insertions(+), 12 deletions(-) --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -1445,18 +1445,26 @@ cifs_discard_remaining_data(struct TCP_S } static int -cifs_readv_discard(struct TCP_Server_Info *server, struct mid_q_entry *mid) +__cifs_readv_discard(struct TCP_Server_Info *server, struct mid_q_entry *mid, + bool malformed) { int length; - struct cifs_readdata *rdata = mid->callback_data; length = cifs_discard_remaining_data(server); - dequeue_mid(mid, rdata->result); + dequeue_mid(mid, malformed); mid->resp_buf = server->smallbuf; server->smallbuf = NULL; return length; } +static int +cifs_readv_discard(struct TCP_Server_Info *server, struct mid_q_entry *mid) +{ + struct cifs_readdata *rdata = mid->callback_data; + + return __cifs_readv_discard(server, mid, rdata->result); +} + int cifs_readv_receive(struct TCP_Server_Info *server, struct mid_q_entry *mid) { @@ -1496,12 +1504,23 @@ cifs_readv_receive(struct TCP_Server_Inf return -1; } + /* set up first two iov for signature check and to get credits */ + rdata->iov[0].iov_base = buf; + rdata->iov[0].iov_len = 4; + rdata->iov[1].iov_base = buf + 4; + rdata->iov[1].iov_len = server->total_read - 4; + cifs_dbg(FYI, "0: iov_base=%p iov_len=%zu\n", + rdata->iov[0].iov_base, rdata->iov[0].iov_len); + cifs_dbg(FYI, "1: iov_base=%p iov_len=%zu\n", + rdata->iov[1].iov_base, rdata->iov[1].iov_len); + /* Was the SMB read successful? */ rdata->result = server->ops->map_error(buf, false); if (rdata->result != 0) { cifs_dbg(FYI, "%s: server returned error %d\n", __func__, rdata->result); - return cifs_readv_discard(server, mid); + /* normal error on read response */ + return __cifs_readv_discard(server, mid, false); } /* Is there enough to get to the rest of the READ_RSP header? */ @@ -1544,14 +1563,6 @@ cifs_readv_receive(struct TCP_Server_Inf server->total_read += length; } - /* set up first iov for signature check */ - rdata->iov[0].iov_base = buf; - rdata->iov[0].iov_len = 4; - rdata->iov[1].iov_base = buf + 4; - rdata->iov[1].iov_len = server->total_read - 4; - cifs_dbg(FYI, "0: iov_base=%p iov_len=%u\n", - rdata->iov[0].iov_base, server->total_read); - /* how much data is in the response? */ data_len = server->ops->read_data_length(buf); if (data_offset + data_len > buflen) {
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Pavel Shilovsky <pshilov@microsoft.com> commit ec678eae746dd25766a61c4095e2b649d3b20b09 upstream. We do need to account for credits received in error responses to read requests on encrypted sessions. Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- fs/cifs/smb2ops.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -2531,11 +2531,23 @@ handle_read_data(struct TCP_Server_Info server->ops->is_status_pending(buf, server, 0)) return -1; - rdata->result = server->ops->map_error(buf, false); + /* set up first two iov to get credits */ + rdata->iov[0].iov_base = buf; + rdata->iov[0].iov_len = 4; + rdata->iov[1].iov_base = buf + 4; + rdata->iov[1].iov_len = + min_t(unsigned int, buf_len, server->vals->read_rsp_size) - 4; + cifs_dbg(FYI, "0: iov_base=%p iov_len=%zu\n", + rdata->iov[0].iov_base, rdata->iov[0].iov_len); + cifs_dbg(FYI, "1: iov_base=%p iov_len=%zu\n", + rdata->iov[1].iov_base, rdata->iov[1].iov_len); + + rdata->result = server->ops->map_error(buf, true); if (rdata->result != 0) { cifs_dbg(FYI, "%s: server returned error %d\n", __func__, rdata->result); - dequeue_mid(mid, rdata->result); + /* normal error on read response */ + dequeue_mid(mid, false); return 0; } @@ -2605,14 +2617,6 @@ handle_read_data(struct TCP_Server_Info return 0; } - /* set up first iov for signature check */ - rdata->iov[0].iov_base = buf; - rdata->iov[0].iov_len = 4; - rdata->iov[1].iov_base = buf + 4; - rdata->iov[1].iov_len = server->vals->read_rsp_size - 4; - cifs_dbg(FYI, "0: iov_base=%p iov_len=%zu\n", - rdata->iov[0].iov_base, server->vals->read_rsp_size); - length = rdata->copy_into_pages(server, rdata, &iter); kfree(bvec);
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Pavel Shilovsky <pshilov@microsoft.com> commit ef68e831840c40c7d01b328b3c0f5d8c4796c232 upstream. When executing add_credits() we currently call cifs_reconnect() if the number of credits is zero and there are no requests in flight. In this case we may call cifs_reconnect() recursively twice and cause memory corruption given the following sequence of functions: mid1.callback() -> add_credits() -> cifs_reconnect() -> -> mid2.callback() -> add_credits() -> cifs_reconnect(). Fix this by avoiding to call cifs_reconnect() in add_credits() and checking for zero credits in the demultiplex thread. Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- fs/cifs/connect.c | 21 +++++++++++++++++++++ fs/cifs/smb2ops.c | 32 +++++++++++++++++++++++++------- 2 files changed, 46 insertions(+), 7 deletions(-) --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -524,6 +524,21 @@ server_unresponsive(struct TCP_Server_In return false; } +static inline bool +zero_credits(struct TCP_Server_Info *server) +{ + int val; + + spin_lock(&server->req_lock); + val = server->credits + server->echo_credits + server->oplock_credits; + if (server->in_flight == 0 && val == 0) { + spin_unlock(&server->req_lock); + return true; + } + spin_unlock(&server->req_lock); + return false; +} + static int cifs_readv_from_socket(struct TCP_Server_Info *server, struct msghdr *smb_msg) { @@ -536,6 +551,12 @@ cifs_readv_from_socket(struct TCP_Server for (total_read = 0; msg_data_left(smb_msg); total_read += length) { try_to_freeze(); + /* reconnect if no credits and no requests in flight */ + if (zero_credits(server)) { + cifs_reconnect(server); + return -ECONNABORTED; + } + if (server_unresponsive(server)) return -ECONNABORTED; --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -33,6 +33,7 @@ #include "smb2glob.h" #include "cifs_ioctl.h" +/* Change credits for different ops and return the total number of credits */ static int change_conf(struct TCP_Server_Info *server) { @@ -40,17 +41,15 @@ change_conf(struct TCP_Server_Info *serv server->oplock_credits = server->echo_credits = 0; switch (server->credits) { case 0: - return -1; + return 0; case 1: server->echoes = false; server->oplocks = false; - cifs_dbg(VFS, "disabling echoes and oplocks\n"); break; case 2: server->echoes = true; server->oplocks = false; server->echo_credits = 1; - cifs_dbg(FYI, "disabling oplocks\n"); break; default: server->echoes = true; @@ -63,14 +62,15 @@ change_conf(struct TCP_Server_Info *serv server->echo_credits = 1; } server->credits -= server->echo_credits + server->oplock_credits; - return 0; + return server->credits + server->echo_credits + server->oplock_credits; } static void smb2_add_credits(struct TCP_Server_Info *server, const unsigned int add, const int optype) { - int *val, rc = 0; + int *val, rc = -1; + spin_lock(&server->req_lock); val = server->ops->get_credits_field(server, optype); *val += add; @@ -94,8 +94,26 @@ smb2_add_credits(struct TCP_Server_Info } spin_unlock(&server->req_lock); wake_up(&server->request_q); - if (rc) - cifs_reconnect(server); + + if (server->tcpStatus == CifsNeedReconnect) + return; + + switch (rc) { + case -1: + /* change_conf hasn't been executed */ + break; + case 0: + cifs_dbg(VFS, "Possible client or server bug - zero credits\n"); + break; + case 1: + cifs_dbg(VFS, "disabling echoes and oplocks\n"); + break; + case 2: + cifs_dbg(FYI, "disabling oplocks\n"); + break; + default: + cifs_dbg(FYI, "add %u credits total=%d\n", add, rc); + } } static void
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Tom Panfil <tom@steelseries.com> commit fe2bfd0d40c935763812973ce15f5764f1c12833 upstream. Add support for the SteelSeries Stratus Duo, a wireless Xbox 360 controller. The Stratus Duo ships with a USB dongle to enable wireless connectivity, but it can also function as a wired controller by connecting it directly to a PC via USB, hence the need for two USD PIDs. 0x1430 is the dongle, and 0x1431 is the controller. Signed-off-by: Tom Panfil <tom@steelseries.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/input/joystick/xpad.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -255,6 +255,8 @@ static const struct xpad_device { { 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX }, { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX }, { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX }, + { 0x1038, 0x1430, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 }, + { 0x1038, 0x1431, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 }, { 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 }, { 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 }, @@ -431,6 +433,7 @@ static const struct usb_device_id xpad_t XPAD_XBOXONE_VENDOR(0x0e6f), /* 0x0e6f X-Box One controllers */ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */ XPAD_XBOXONE_VENDOR(0x0f0d), /* Hori Controllers */ + XPAD_XBOX360_VENDOR(0x1038), /* SteelSeries Controllers */ XPAD_XBOX360_VENDOR(0x11c9), /* Nacon GC100XF */ XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */ XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Rasmus Villemoes <linux@rasmusvillemoes.dk> commit f0907827a8a9152aedac2833ed1b674a7b2a44f2 upstream. This adds wrappers for the __builtin overflow checkers present in gcc 5.1+ as well as fallback implementations for earlier compilers. It's not that easy to implement the fully generic __builtin_X_overflow(T1 a, T2 b, T3 *d) in macros, so the fallback code assumes that T1, T2 and T3 are the same. We obviously don't want the wrappers to have different semantics depending on $GCC_VERSION, so we also insist on that even when using the builtins. There are a few problems with the 'a+b < a' idiom for checking for overflow: For signed types, it relies on undefined behaviour and is not actually complete (it doesn't check underflow; e.g. INT_MIN+INT_MIN == 0 isn't caught). Due to type promotion it is wrong for all types (signed and unsigned) narrower than int. Similarly, when a and b does not have the same type, there are subtle cases like u32 a; if (a + sizeof(foo) < a) return -EOVERFLOW; a += sizeof(foo); where the test is always false on 64 bit platforms. Add to that that it is not always possible to determine the types involved at a glance. The new overflow.h is somewhat bulky, but that's mostly a result of trying to be type-generic, complete (e.g. catching not only overflow but also signed underflow) and not relying on undefined behaviour. Linus is of course right [1] that for unsigned subtraction a-b, the right way to check for overflow (underflow) is "b > a" and not "__builtin_sub_overflow(a, b, &d)", but that's just one out of six cases covered here, and included mostly for completeness. So is it worth it? I think it is, if nothing else for the documentation value of seeing if (check_add_overflow(a, b, &d)) return -EGOAWAY; do_stuff_with(d); instead of the open-coded (and possibly wrong and/or incomplete and/or UBsan-tickling) if (a+b < a) return -EGOAWAY; do_stuff_with(a+b); While gcc does recognize the 'a+b < a' idiom for testing unsigned add overflow, it doesn't do nearly as good for unsigned multiplication (there's also no single well-established idiom). So using check_mul_overflow in kcalloc and friends may also make gcc generate slightly better code. [1] https://lkml.org/lkml/2015/11/2/658 Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- include/linux/compiler-clang.h | 14 ++ include/linux/compiler-gcc.h | 4 include/linux/compiler-intel.h | 4 include/linux/overflow.h | 205 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 227 insertions(+) --- a/include/linux/compiler-clang.h +++ b/include/linux/compiler-clang.h @@ -24,3 +24,17 @@ #ifdef __noretpoline #undef __noretpoline #endif + +/* + * Not all versions of clang implement the the type-generic versions + * of the builtin overflow checkers. Fortunately, clang implements + * __has_builtin allowing us to avoid awkward version + * checks. Unfortunately, we don't know which version of gcc clang + * pretends to be, so the macro may or may not be defined. + */ +#undef COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW +#if __has_builtin(__builtin_mul_overflow) && \ + __has_builtin(__builtin_add_overflow) && \ + __has_builtin(__builtin_sub_overflow) +#define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1 +#endif --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -358,3 +358,7 @@ * code */ #define uninitialized_var(x) x = x + +#if GCC_VERSION >= 50100 +#define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1 +#endif --- a/include/linux/compiler-intel.h +++ b/include/linux/compiler-intel.h @@ -44,3 +44,7 @@ #define __builtin_bswap16 _bswap16 #endif +/* + * icc defines __GNUC__, but does not implement the builtin overflow checkers. + */ +#undef COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW --- /dev/null +++ b/include/linux/overflow.h @@ -0,0 +1,205 @@ +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ +#ifndef __LINUX_OVERFLOW_H +#define __LINUX_OVERFLOW_H + +#include <linux/compiler.h> + +/* + * In the fallback code below, we need to compute the minimum and + * maximum values representable in a given type. These macros may also + * be useful elsewhere, so we provide them outside the + * COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW block. + * + * It would seem more obvious to do something like + * + * #define type_min(T) (T)(is_signed_type(T) ? (T)1 << (8*sizeof(T)-1) : 0) + * #define type_max(T) (T)(is_signed_type(T) ? ((T)1 << (8*sizeof(T)-1)) - 1 : ~(T)0) + * + * Unfortunately, the middle expressions, strictly speaking, have + * undefined behaviour, and at least some versions of gcc warn about + * the type_max expression (but not if -fsanitize=undefined is in + * effect; in that case, the warning is deferred to runtime...). + * + * The slightly excessive casting in type_min is to make sure the + * macros also produce sensible values for the exotic type _Bool. [The + * overflow checkers only almost work for _Bool, but that's + * a-feature-not-a-bug, since people shouldn't be doing arithmetic on + * _Bools. Besides, the gcc builtins don't allow _Bool* as third + * argument.] + * + * Idea stolen from + * https://mail-index.netbsd.org/tech-misc/2007/02/05/0000.html - + * credit to Christian Biere. + */ +#define is_signed_type(type) (((type)(-1)) < (type)1) +#define __type_half_max(type) ((type)1 << (8*sizeof(type) - 1 - is_signed_type(type))) +#define type_max(T) ((T)((__type_half_max(T) - 1) + __type_half_max(T))) +#define type_min(T) ((T)((T)-type_max(T)-(T)1)) + + +#ifdef COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW +/* + * For simplicity and code hygiene, the fallback code below insists on + * a, b and *d having the same type (similar to the min() and max() + * macros), whereas gcc's type-generic overflow checkers accept + * different types. Hence we don't just make check_add_overflow an + * alias for __builtin_add_overflow, but add type checks similar to + * below. + */ +#define check_add_overflow(a, b, d) ({ \ + typeof(a) __a = (a); \ + typeof(b) __b = (b); \ + typeof(d) __d = (d); \ + (void) (&__a == &__b); \ + (void) (&__a == __d); \ + __builtin_add_overflow(__a, __b, __d); \ +}) + +#define check_sub_overflow(a, b, d) ({ \ + typeof(a) __a = (a); \ + typeof(b) __b = (b); \ + typeof(d) __d = (d); \ + (void) (&__a == &__b); \ + (void) (&__a == __d); \ + __builtin_sub_overflow(__a, __b, __d); \ +}) + +#define check_mul_overflow(a, b, d) ({ \ + typeof(a) __a = (a); \ + typeof(b) __b = (b); \ + typeof(d) __d = (d); \ + (void) (&__a == &__b); \ + (void) (&__a == __d); \ + __builtin_mul_overflow(__a, __b, __d); \ +}) + +#else + + +/* Checking for unsigned overflow is relatively easy without causing UB. */ +#define __unsigned_add_overflow(a, b, d) ({ \ + typeof(a) __a = (a); \ + typeof(b) __b = (b); \ + typeof(d) __d = (d); \ + (void) (&__a == &__b); \ + (void) (&__a == __d); \ + *__d = __a + __b; \ + *__d < __a; \ +}) +#define __unsigned_sub_overflow(a, b, d) ({ \ + typeof(a) __a = (a); \ + typeof(b) __b = (b); \ + typeof(d) __d = (d); \ + (void) (&__a == &__b); \ + (void) (&__a == __d); \ + *__d = __a - __b; \ + __a < __b; \ +}) +/* + * If one of a or b is a compile-time constant, this avoids a division. + */ +#define __unsigned_mul_overflow(a, b, d) ({ \ + typeof(a) __a = (a); \ + typeof(b) __b = (b); \ + typeof(d) __d = (d); \ + (void) (&__a == &__b); \ + (void) (&__a == __d); \ + *__d = __a * __b; \ + __builtin_constant_p(__b) ? \ + __b > 0 && __a > type_max(typeof(__a)) / __b : \ + __a > 0 && __b > type_max(typeof(__b)) / __a; \ +}) + +/* + * For signed types, detecting overflow is much harder, especially if + * we want to avoid UB. But the interface of these macros is such that + * we must provide a result in *d, and in fact we must produce the + * result promised by gcc's builtins, which is simply the possibly + * wrapped-around value. Fortunately, we can just formally do the + * operations in the widest relevant unsigned type (u64) and then + * truncate the result - gcc is smart enough to generate the same code + * with and without the (u64) casts. + */ + +/* + * Adding two signed integers can overflow only if they have the same + * sign, and overflow has happened iff the result has the opposite + * sign. + */ +#define __signed_add_overflow(a, b, d) ({ \ + typeof(a) __a = (a); \ + typeof(b) __b = (b); \ + typeof(d) __d = (d); \ + (void) (&__a == &__b); \ + (void) (&__a == __d); \ + *__d = (u64)__a + (u64)__b; \ + (((~(__a ^ __b)) & (*__d ^ __a)) \ + & type_min(typeof(__a))) != 0; \ +}) + +/* + * Subtraction is similar, except that overflow can now happen only + * when the signs are opposite. In this case, overflow has happened if + * the result has the opposite sign of a. + */ +#define __signed_sub_overflow(a, b, d) ({ \ + typeof(a) __a = (a); \ + typeof(b) __b = (b); \ + typeof(d) __d = (d); \ + (void) (&__a == &__b); \ + (void) (&__a == __d); \ + *__d = (u64)__a - (u64)__b; \ + ((((__a ^ __b)) & (*__d ^ __a)) \ + & type_min(typeof(__a))) != 0; \ +}) + +/* + * Signed multiplication is rather hard. gcc always follows C99, so + * division is truncated towards 0. This means that we can write the + * overflow check like this: + * + * (a > 0 && (b > MAX/a || b < MIN/a)) || + * (a < -1 && (b > MIN/a || b < MAX/a) || + * (a == -1 && b == MIN) + * + * The redundant casts of -1 are to silence an annoying -Wtype-limits + * (included in -Wextra) warning: When the type is u8 or u16, the + * __b_c_e in check_mul_overflow obviously selects + * __unsigned_mul_overflow, but unfortunately gcc still parses this + * code and warns about the limited range of __b. + */ + +#define __signed_mul_overflow(a, b, d) ({ \ + typeof(a) __a = (a); \ + typeof(b) __b = (b); \ + typeof(d) __d = (d); \ + typeof(a) __tmax = type_max(typeof(a)); \ + typeof(a) __tmin = type_min(typeof(a)); \ + (void) (&__a == &__b); \ + (void) (&__a == __d); \ + *__d = (u64)__a * (u64)__b; \ + (__b > 0 && (__a > __tmax/__b || __a < __tmin/__b)) || \ + (__b < (typeof(__b))-1 && (__a > __tmin/__b || __a < __tmax/__b)) || \ + (__b == (typeof(__b))-1 && __a == __tmin); \ +}) + + +#define check_add_overflow(a, b, d) \ + __builtin_choose_expr(is_signed_type(typeof(a)), \ + __signed_add_overflow(a, b, d), \ + __unsigned_add_overflow(a, b, d)) + +#define check_sub_overflow(a, b, d) \ + __builtin_choose_expr(is_signed_type(typeof(a)), \ + __signed_sub_overflow(a, b, d), \ + __unsigned_sub_overflow(a, b, d)) + +#define check_mul_overflow(a, b, d) \ + __builtin_choose_expr(is_signed_type(typeof(a)), \ + __signed_mul_overflow(a, b, d), \ + __unsigned_mul_overflow(a, b, d)) + + +#endif /* COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW */ + +#endif /* __LINUX_OVERFLOW_H */
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Dmitry Torokhov <dmitry.torokhov@gmail.com> commit d77651a227f8920dd7ec179b84e400cce844eeb3 upstream. An integer overflow may arise in uinput_validate_absinfo() if "max - min" can't be represented by an "int". We should check for overflow before trying to use the result. Reported-by: Kyungtae Kim <kt0755@gmail.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/input/misc/uinput.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -39,6 +39,7 @@ #include <linux/fs.h> #include <linux/miscdevice.h> #include <linux/uinput.h> +#include <linux/overflow.h> #include <linux/input/mt.h> #include "../input-compat.h" @@ -356,7 +357,7 @@ static int uinput_open(struct inode *ino static int uinput_validate_absinfo(struct input_dev *dev, unsigned int code, const struct input_absinfo *abs) { - int min, max; + int min, max, range; min = abs->minimum; max = abs->maximum; @@ -368,7 +369,7 @@ static int uinput_validate_absinfo(struc return -EINVAL; } - if (abs->flat > max - min) { + if (!check_sub_overflow(max, min, &range) && abs->flat > range) { printk(KERN_DEBUG "%s: abs_flat #%02x out of range: %d (min:%d/max:%d)\n", UINPUT_NAME, code, abs->flat, min, max);
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Dan Williams <dan.j.williams@intel.com> commit 5e9e38d0db1d29efed1dd4cf9a70115d33521be7 upstream. In preparation for using function number 0 as an error value, prevent it from being considered a valid function value by acpi_nfit_ctl(). Cc: <stable@vger.kernel.org> Cc: stuart hayes <stuart.w.hayes@gmail.com> Fixes: e02fb7264d8a ("nfit: add Microsoft NVDIMM DSM command set...") Reported-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/acpi/nfit/core.c | 7 +++++++ 1 file changed, 7 insertions(+) --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -1503,6 +1503,13 @@ static int acpi_nfit_add_dimm(struct acp return 0; } + /* + * Function 0 is the command interrogation function, don't + * export it to potential userspace use, and enable it to be + * used as an error value in acpi_nfit_ctl(). + */ + dsm_mask &= ~1UL; + guid = to_nfit_uuid(nfit_mem->family); for_each_set_bit(i, &dsm_mask, BITS_PER_LONG) if (acpi_check_dsm(adev_dimm->handle, guid, 1, 1ULL << i))
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Dan Williams <dan.j.williams@intel.com> commit 11189c1089da413aa4b5fd6be4c4d47c78968819 upstream. The _DSM function number validation only happens to succeed when the generic Linux command number translation corresponds with a DSM-family-specific function number. This breaks NVDIMM-N implementations that correctly implement _LSR, _LSW, and _LSI, but do not happen to publish support for DSM function numbers 4, 5, and 6. Recall that the support for _LS{I,R,W} family of methods results in the DIMM being marked as supporting those command numbers at acpi_nfit_register_dimms() time. The DSM function mask is only used for ND_CMD_CALL support of non-NVDIMM_FAMILY_INTEL devices. Fixes: 31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command...") Cc: <stable@vger.kernel.org> Link: https://github.com/pmem/ndctl/issues/78 Reported-by: Sujith Pandel <sujith_pandel@dell.com> Tested-by: Sujith Pandel <sujith_pandel@dell.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/acpi/nfit/core.c | 54 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 40 insertions(+), 14 deletions(-) --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -208,6 +208,32 @@ static int xlat_status(struct nvdimm *nv return xlat_nvdimm_status(buf, cmd, status); } +static int cmd_to_func(struct nfit_mem *nfit_mem, unsigned int cmd, + struct nd_cmd_pkg *call_pkg) +{ + if (call_pkg) { + int i; + + if (nfit_mem->family != call_pkg->nd_family) + return -ENOTTY; + + for (i = 0; i < ARRAY_SIZE(call_pkg->nd_reserved2); i++) + if (call_pkg->nd_reserved2[i]) + return -EINVAL; + return call_pkg->nd_command; + } + + /* Linux ND commands == NVDIMM_FAMILY_INTEL function numbers */ + if (nfit_mem->family == NVDIMM_FAMILY_INTEL) + return cmd; + + /* + * Force function number validation to fail since 0 is never + * published as a valid function in dsm_mask. + */ + return 0; +} + int acpi_nfit_ctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm, unsigned int cmd, void *buf, unsigned int buf_len, int *cmd_rc) { @@ -220,21 +246,11 @@ int acpi_nfit_ctl(struct nvdimm_bus_desc unsigned long cmd_mask, dsm_mask; u32 offset, fw_status = 0; acpi_handle handle; - unsigned int func; const guid_t *guid; - int rc, i; + int func, rc, i; if (cmd_rc) *cmd_rc = -EINVAL; - func = cmd; - if (cmd == ND_CMD_CALL) { - call_pkg = buf; - func = call_pkg->nd_command; - - for (i = 0; i < ARRAY_SIZE(call_pkg->nd_reserved2); i++) - if (call_pkg->nd_reserved2[i]) - return -EINVAL; - } if (nvdimm) { struct nfit_mem *nfit_mem = nvdimm_provider_data(nvdimm); @@ -242,9 +258,12 @@ int acpi_nfit_ctl(struct nvdimm_bus_desc if (!adev) return -ENOTTY; - if (call_pkg && nfit_mem->family != call_pkg->nd_family) - return -ENOTTY; + if (cmd == ND_CMD_CALL) + call_pkg = buf; + func = cmd_to_func(nfit_mem, cmd, call_pkg); + if (func < 0) + return func; dimm_name = nvdimm_name(nvdimm); cmd_name = nvdimm_cmd_name(cmd); cmd_mask = nvdimm_cmd_mask(nvdimm); @@ -255,6 +274,7 @@ int acpi_nfit_ctl(struct nvdimm_bus_desc } else { struct acpi_device *adev = to_acpi_dev(acpi_desc); + func = cmd; cmd_name = nvdimm_bus_cmd_name(cmd); cmd_mask = nd_desc->cmd_mask; dsm_mask = cmd_mask; @@ -269,7 +289,13 @@ int acpi_nfit_ctl(struct nvdimm_bus_desc if (!desc || (cmd && (desc->out_num + desc->in_num == 0))) return -ENOTTY; - if (!test_bit(cmd, &cmd_mask) || !test_bit(func, &dsm_mask)) + /* + * Check for a valid command. For ND_CMD_CALL, we also have to + * make sure that the DSM function is supported. + */ + if (cmd == ND_CMD_CALL && !test_bit(func, &dsm_mask)) + return -ENOTTY; + else if (!test_bit(cmd, &cmd_mask)) return -ENOTTY; in_obj.type = ACPI_TYPE_PACKAGE;
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Joe Thornber <ejt@redhat.com> commit d445bd9cec1a850c2100fcf53684c13b3fd934f2 upstream. Commit 00a0ea33b495 ("dm thin: do not queue freed thin mapping for next stage processing") changed process_prepared_discard_passdown_pt1() to increment all the blocks being discarded until after the passdown had completed to avoid them being prematurely reused. IO issued to a thin device that breaks sharing with a snapshot, followed by a discard issued to snapshot(s) that previously shared the block(s), results in passdown_double_checking_shared_status() being called to iterate through the blocks double checking their reference count is zero and issuing the passdown if so. So a side effect of commit 00a0ea33b495 is passdown_double_checking_shared_status() was broken. Fix this by checking if the block reference count is greater than 1. Also, rename dm_pool_block_is_used() to dm_pool_block_is_shared(). Fixes: 00a0ea33b495 ("dm thin: do not queue freed thin mapping for next stage processing") Cc: stable@vger.kernel.org # 4.9+ Reported-by: ryan.p.norwood@gmail.com Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/md/dm-thin-metadata.c | 4 ++-- drivers/md/dm-thin-metadata.h | 2 +- drivers/md/dm-thin.c | 10 +++++----- 3 files changed, 8 insertions(+), 8 deletions(-) --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -1687,7 +1687,7 @@ int dm_thin_remove_range(struct dm_thin_ return r; } -int dm_pool_block_is_used(struct dm_pool_metadata *pmd, dm_block_t b, bool *result) +int dm_pool_block_is_shared(struct dm_pool_metadata *pmd, dm_block_t b, bool *result) { int r; uint32_t ref_count; @@ -1695,7 +1695,7 @@ int dm_pool_block_is_used(struct dm_pool down_read(&pmd->root_lock); r = dm_sm_get_count(pmd->data_sm, b, &ref_count); if (!r) - *result = (ref_count != 0); + *result = (ref_count > 1); up_read(&pmd->root_lock); return r; --- a/drivers/md/dm-thin-metadata.h +++ b/drivers/md/dm-thin-metadata.h @@ -195,7 +195,7 @@ int dm_pool_get_metadata_dev_size(struct int dm_pool_get_data_dev_size(struct dm_pool_metadata *pmd, dm_block_t *result); -int dm_pool_block_is_used(struct dm_pool_metadata *pmd, dm_block_t b, bool *result); +int dm_pool_block_is_shared(struct dm_pool_metadata *pmd, dm_block_t b, bool *result); int dm_pool_inc_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_t e); int dm_pool_dec_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_t e); --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -1042,7 +1042,7 @@ static void passdown_double_checking_sha * passdown we have to check that these blocks are now unused. */ int r = 0; - bool used = true; + bool shared = true; struct thin_c *tc = m->tc; struct pool *pool = tc->pool; dm_block_t b = m->data_block, e, end = m->data_block + m->virt_end - m->virt_begin; @@ -1052,11 +1052,11 @@ static void passdown_double_checking_sha while (b != end) { /* find start of unmapped run */ for (; b < end; b++) { - r = dm_pool_block_is_used(pool->pmd, b, &used); + r = dm_pool_block_is_shared(pool->pmd, b, &shared); if (r) goto out; - if (!used) + if (!shared) break; } @@ -1065,11 +1065,11 @@ static void passdown_double_checking_sha /* find end of run */ for (e = b + 1; e != end; e++) { - r = dm_pool_block_is_used(pool->pmd, e, &used); + r = dm_pool_block_is_shared(pool->pmd, e, &shared); if (r) goto out; - if (used) + if (shared) break; }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Milan Broz <gmazyland@gmail.com> commit 1856b9f7bcc8e9bdcccc360aabb56fbd4dd6c565 upstream. The dm-crypt cipher specification in a mapping table is defined as: cipher[:keycount]-chainmode-ivmode[:ivopts] or (new crypt API format): capi:cipher_api_spec-ivmode[:ivopts] For ESSIV, the parameter includes hash specification, for example: aes-cbc-essiv:sha256 The implementation expected that additional IV option to never include another dash '-' character. But, with SHA3, there are names like sha3-256; so the mapping table parser fails: dmsetup create test --table "0 8 crypt aes-cbc-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" or (new crypt API format) dmsetup create test --table "0 8 crypt capi:cbc(aes)-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" device-mapper: crypt: Ignoring unexpected additional cipher options device-mapper: table: 253:0: crypt: Error creating IV device-mapper: ioctl: error adding target to table Fix the dm-crypt constructor to ignore additional dash in IV options and also remove a bogus warning (that is ignored anyway). Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/md/dm-crypt.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -2413,9 +2413,21 @@ static int crypt_ctr_cipher_new(struct d * capi:cipher_api_spec-iv:ivopts */ tmp = &cipher_in[strlen("capi:")]; - cipher_api = strsep(&tmp, "-"); - *ivmode = strsep(&tmp, ":"); - *ivopts = tmp; + + /* Separate IV options if present, it can contain another '-' in hash name */ + *ivopts = strrchr(tmp, ':'); + if (*ivopts) { + **ivopts = '\0'; + (*ivopts)++; + } + /* Parse IV mode */ + *ivmode = strrchr(tmp, '-'); + if (*ivmode) { + **ivmode = '\0'; + (*ivmode)++; + } + /* The rest is crypto API spec */ + cipher_api = tmp; if (*ivmode && !strcmp(*ivmode, "lmk")) cc->tfms_count = 64; @@ -2485,11 +2497,8 @@ static int crypt_ctr_cipher_old(struct d goto bad_mem; chainmode = strsep(&tmp, "-"); - *ivopts = strsep(&tmp, "-"); - *ivmode = strsep(&*ivopts, ":"); - - if (tmp) - DMWARN("Ignoring unexpected additional cipher options"); + *ivmode = strsep(&tmp, ":"); + *ivopts = tmp; /* * For compatibility with the original dm-crypt mapping format, if
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Alexander Popov <alex.popov@linux.com> commit 5cc244a20b86090c087073c124284381cdf47234 upstream. The single-step debugging of KVM guests on x86 is broken: if we run gdb 'stepi' command at the breakpoint when the guest interrupts are enabled, RIP always jumps to native_apic_mem_write(). Then other nasty effects follow. Long investigation showed that on Jun 7, 2017 the commit c8401dda2f0a00cd25c0 ("KVM: x86: fix singlestepping over syscall") introduced the kvm_run.debug corruption: kvm_vcpu_do_singlestep() can be called without X86_EFLAGS_TF set. Let's fix it. Please consider that for -stable. Signed-off-by: Alexander Popov <alex.popov@linux.com> Cc: stable@vger.kernel.org Fixes: c8401dda2f0a00cd25c0 ("KVM: x86: fix singlestepping over syscall") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/x86/kvm/x86.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -5923,8 +5923,7 @@ restart: toggle_interruptibility(vcpu, ctxt->interruptibility); vcpu->arch.emulate_regs_need_sync_to_vcpu = false; kvm_rip_write(vcpu, ctxt->eip); - if (r == EMULATE_DONE && - (ctxt->tf || (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP))) + if (r == EMULATE_DONE && ctxt->tf) kvm_vcpu_do_singlestep(vcpu, &r); if (!ctxt->have_exception || exception_type(ctxt->exception.vector) == EXCPT_TRAP)
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Dave Hansen <dave.hansen@linux.intel.com> commit a31e184e4f69965c99c04cc5eb8a4920e0c63737 upstream. Memory protection key behavior should be the same in a child as it was in the parent before a fork. But, there is a bug that resets the state in the child at fork instead of preserving it. The creation of new mm's is a bit convoluted. At fork(), the code does: 1. memcpy() the parent mm to initialize child 2. mm_init() to initalize some select stuff stuff 3. dup_mmap() to create true copies that memcpy() did not do right For pkeys two bits of state need to be preserved across a fork: 'execute_only_pkey' and 'pkey_allocation_map'. Those are preserved by the memcpy(), but mm_init() invokes init_new_context() which overwrites 'execute_only_pkey' and 'pkey_allocation_map' with "new" values. The author of the code erroneously believed that init_new_context is *only* called at execve()-time. But, alas, init_new_context() is used at execve() and fork(). The result is that, after a fork(), the child's pkey state ends up looking like it does after an execve(), which is totally wrong. pkeys that are already allocated can be allocated again, for instance. To fix this, add code called by dup_mmap() to copy the pkey state from parent to child explicitly. Also add a comment above init_new_context() to make it more clear to the next poor sod what this code is used for. Fixes: e8c24d3a23a ("x86/pkeys: Allocation/free syscalls") Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: peterz@infradead.org Cc: mpe@ellerman.id.au Cc: will.deacon@arm.com Cc: luto@kernel.org Cc: jroedel@suse.de Cc: stable@vger.kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Will Deacon <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/20190102215655.7A69518C@viggo.jf.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/x86/include/asm/mmu_context.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) --- a/arch/x86/include/asm/mmu_context.h +++ b/arch/x86/include/asm/mmu_context.h @@ -182,6 +182,10 @@ static inline void switch_ldt(struct mm_ void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk); +/* + * Init a new mm. Used on mm copies, like at fork() + * and on mm's that are brand-new, like at execve(). + */ static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { @@ -232,8 +236,22 @@ do { \ } while (0) #endif +static inline void arch_dup_pkeys(struct mm_struct *oldmm, + struct mm_struct *mm) +{ +#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS + if (!cpu_feature_enabled(X86_FEATURE_OSPKE)) + return; + + /* Duplicate the oldmm pkey state in mm: */ + mm->context.pkey_allocation_map = oldmm->context.pkey_allocation_map; + mm->context.execute_only_pkey = oldmm->context.execute_only_pkey; +#endif +} + static inline int arch_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm) { + arch_dup_pkeys(oldmm, mm); paravirt_arch_dup_mmap(oldmm, mm); return ldt_dup_context(oldmm, mm); }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Dave Hansen <dave.hansen@linux.intel.com> commit e1812933b17be7814f51b6c310c5d1ced7a9a5f5 upstream. There was a bug where the per-mm pkey state was not being preserved across fork() in the child. fork() is performed in the pkey selftests, but all of the pkey activity is performed in the parent. The child does not perform any actions sensitive to pkey state. To make the test more sensitive to these kinds of bugs, add a fork() where the parent exits, and execution continues in the child. To achieve this let the key exhaustion test not terminate at the first allocation failure and fork after 2*NR_PKEYS loops and continue in the child. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: peterz@infradead.org Cc: mpe@ellerman.id.au Cc: will.deacon@arm.com Cc: luto@kernel.org Cc: jroedel@suse.de Cc: stable@vger.kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Will Deacon <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/20190102215657.585704B7@viggo.jf.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- tools/testing/selftests/x86/protection_keys.c | 41 +++++++++++++++++++------- 1 file changed, 31 insertions(+), 10 deletions(-) --- a/tools/testing/selftests/x86/protection_keys.c +++ b/tools/testing/selftests/x86/protection_keys.c @@ -1133,6 +1133,21 @@ void test_pkey_syscalls_bad_args(int *pt pkey_assert(err); } +void become_child(void) +{ + pid_t forkret; + + forkret = fork(); + pkey_assert(forkret >= 0); + dprintf3("[%d] fork() ret: %d\n", getpid(), forkret); + + if (!forkret) { + /* in the child */ + return; + } + exit(0); +} + /* Assumes that all pkeys other than 'pkey' are unallocated */ void test_pkey_alloc_exhaust(int *ptr, u16 pkey) { @@ -1141,7 +1156,7 @@ void test_pkey_alloc_exhaust(int *ptr, u int nr_allocated_pkeys = 0; int i; - for (i = 0; i < NR_PKEYS*2; i++) { + for (i = 0; i < NR_PKEYS*3; i++) { int new_pkey; dprintf1("%s() alloc loop: %d\n", __func__, i); new_pkey = alloc_pkey(); @@ -1152,21 +1167,27 @@ void test_pkey_alloc_exhaust(int *ptr, u if ((new_pkey == -1) && (errno == ENOSPC)) { dprintf2("%s() failed to allocate pkey after %d tries\n", __func__, nr_allocated_pkeys); - break; + } else { + /* + * Ensure the number of successes never + * exceeds the number of keys supported + * in the hardware. + */ + pkey_assert(nr_allocated_pkeys < NR_PKEYS); + allocated_pkeys[nr_allocated_pkeys++] = new_pkey; } - pkey_assert(nr_allocated_pkeys < NR_PKEYS); - allocated_pkeys[nr_allocated_pkeys++] = new_pkey; + + /* + * Make sure that allocation state is properly + * preserved across fork(). + */ + if (i == NR_PKEYS*2) + become_child(); } dprintf3("%s()::%d\n", __func__, __LINE__); /* - * ensure it did not reach the end of the loop without - * failure: - */ - pkey_assert(i < NR_PKEYS*2); - - /* * There are 16 pkeys supported in hardware. Three are * allocated by the time we get here: * 1. The default key (0)
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Daniel Drake <drake@endlessm.com> commit 7e6fc2f50a3197d0e82d1c0e86282976c9e6c8a4 upstream. The outb() function takes parameters value and port, in that order. Fix the parameters used in the kalsr i8254 fallback code. Fixes: 5bfce5ef55cb ("x86, kaslr: Provide randomness functions") Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: linux@endlessm.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190107034024.15005-1-drake@endlessm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/x86/lib/kaslr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/x86/lib/kaslr.c +++ b/arch/x86/lib/kaslr.c @@ -36,8 +36,8 @@ static inline u16 i8254(void) u16 status, timer; do { - outb(I8254_PORT_CONTROL, - I8254_CMD_READBACK | I8254_SELECT_COUNTER0); + outb(I8254_CMD_READBACK | I8254_SELECT_COUNTER0, + I8254_PORT_CONTROL); status = inb(I8254_PORT_COUNTER0); timer = inb(I8254_PORT_COUNTER0); timer |= inb(I8254_PORT_COUNTER0) << 8;
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Thomas Gleixner <tglx@linutronix.de> commit 93ad0fc088c5b4631f796c995bdd27a082ef33a6 upstream. The recent commit which prevented a division by 0 issue in the alarm timer code broke posix CPU timers as an unwanted side effect. The reason is that the common rearm code checks for timer->it_interval being 0 now. What went unnoticed is that the posix cpu timer setup does not initialize timer->it_interval as it stores the interval in CPU timer specific storage. The reason for the separate storage is historical as the posix CPU timers always had a 64bit nanoseconds representation internally while timer->it_interval is type ktime_t which used to be a modified timespec representation on 32bit machines. Instead of reverting the offending commit and fixing the alarmtimer issue in the alarmtimer code, store the interval in timer->it_interval at CPU timer setup time so the common code check works. This also repairs the existing inconistency of the posix CPU timer code which kept a single shot timer armed despite of the interval being 0. The separate storage can be removed in mainline, but that needs to be a separate commit as the current one has to be backported to stable kernels. Fixes: 0e334db6bb4b ("posix-timers: Fix division by zero bug") Reported-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190111133500.840117406@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- kernel/time/posix-cpu-timers.c | 1 + 1 file changed, 1 insertion(+) --- a/kernel/time/posix-cpu-timers.c +++ b/kernel/time/posix-cpu-timers.c @@ -685,6 +685,7 @@ static int posix_cpu_timer_set(struct k_ * set up the signal and overrun bookkeeping. */ timer->it.cpu.incr = timespec64_to_ns(&new->it_interval); + timer->it_interval = ns_to_ktime(timer->it.cpu.incr); /* * This acts as a modification timestamp for the timer,
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Marc Zyngier <marc.zyngier@arm.com> commit 8208d1708b88b412ca97f50a6d951242c88cbbac upstream. The way we allocate events works fine in most cases, except when multiple PCI devices share an ITS-visible DevID, and that one of them is trying to use MultiMSI allocation. In that case, our allocation is not guaranteed to be zero-based anymore, and we have to make sure we allocate it on a boundary that is compatible with the PCI Multi-MSI constraints. Fix this by allocating the full region upfront instead of iterating over the number of MSIs. MSI-X are always allocated one by one, so this shouldn't change anything on that front. Fixes: b48ac83d6bbc2 ("irqchip: GICv3: ITS: MSI support") Cc: stable@vger.kernel.org Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/irqchip/irq-gic-v3-its.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -2086,13 +2086,14 @@ static void its_free_device(struct its_d kfree(its_dev); } -static int its_alloc_device_irq(struct its_device *dev, irq_hw_number_t *hwirq) +static int its_alloc_device_irq(struct its_device *dev, int nvecs, irq_hw_number_t *hwirq) { int idx; - idx = find_first_zero_bit(dev->event_map.lpi_map, - dev->event_map.nr_lpis); - if (idx == dev->event_map.nr_lpis) + idx = bitmap_find_free_region(dev->event_map.lpi_map, + dev->event_map.nr_lpis, + get_count_order(nvecs)); + if (idx < 0) return -ENOSPC; *hwirq = dev->event_map.lpi_base + idx; @@ -2188,21 +2189,21 @@ static int its_irq_domain_alloc(struct i int err; int i; - for (i = 0; i < nr_irqs; i++) { - err = its_alloc_device_irq(its_dev, &hwirq); - if (err) - return err; + err = its_alloc_device_irq(its_dev, nr_irqs, &hwirq); + if (err) + return err; - err = its_irq_gic_domain_alloc(domain, virq + i, hwirq); + for (i = 0; i < nr_irqs; i++) { + err = its_irq_gic_domain_alloc(domain, virq + i, hwirq + i); if (err) return err; irq_domain_set_hwirq_and_chip(domain, virq + i, - hwirq, &its_irq_chip, its_dev); + hwirq + i, &its_irq_chip, its_dev); irqd_set_single_target(irq_desc_get_irq_data(irq_to_desc(virq + i))); pr_debug("ID:%d pID:%d vID:%d\n", - (int)(hwirq - its_dev->event_map.lpi_base), - (int) hwirq, virq + i); + (int)(hwirq + i - its_dev->event_map.lpi_base), + (int)(hwirq + i), virq + i); } return 0;
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> commit 7b12c8189a3dc50638e7d53714c88007268d47ef upstream. This patch revert commit 7da11ba5c506 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") After introduction of this change we encountered following new error message on various i.MX plattforms (flexcan): | flexcan 53fc8000.can can0: __can_get_echo_skb: BUG! Trying to echo non | existing skb: can_priv::echo_skb[0] The introduction of the message was a mistake because priv->echo_skb[idx] = NULL is a perfectly valid in following case: If CAN_RAW_LOOPBACK is disabled (setsockopt) in applications, the pkt_type of the tx skb's given to can_put_echo_skb is set to PACKET_LOOPBACK. In this case can_put_echo_skb will not set priv->echo_skb[idx]. It is therefore kept NULL. As additional argument for revert: The order of check and usage of idx was changed. idx is used to access an array element before checking it's boundaries. Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Fixes: 7da11ba5c506 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/can/dev.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -479,8 +479,6 @@ EXPORT_SYMBOL_GPL(can_put_echo_skb); struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr) { struct can_priv *priv = netdev_priv(dev); - struct sk_buff *skb = priv->echo_skb[idx]; - struct canfd_frame *cf; if (idx >= priv->echo_skb_max) { netdev_err(dev, "%s: BUG! Trying to access can_priv::echo_skb out of bounds (%u/max %u)\n", @@ -488,20 +486,21 @@ struct sk_buff *__can_get_echo_skb(struc return NULL; } - if (!skb) { - netdev_err(dev, "%s: BUG! Trying to echo non existing skb: can_priv::echo_skb[%u]\n", - __func__, idx); - return NULL; - } + if (priv->echo_skb[idx]) { + /* Using "struct canfd_frame::len" for the frame + * length is supported on both CAN and CANFD frames. + */ + struct sk_buff *skb = priv->echo_skb[idx]; + struct canfd_frame *cf = (struct canfd_frame *)skb->data; + u8 len = cf->len; - /* Using "struct canfd_frame::len" for the frame - * length is supported on both CAN and CANFD frames. - */ - cf = (struct canfd_frame *)skb->data; - *len_ptr = cf->len; - priv->echo_skb[idx] = NULL; + *len_ptr = len; + priv->echo_skb[idx] = NULL; + + return skb; + } - return skb; + return NULL; } /*
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Oliver Hartkopp <socketcan@hartkopp.net> commit 93171ba6f1deffd82f381d36cb13177872d023f6 upstream. Kyungtae Kim detected a potential integer overflow in bcm_[rx|tx]_setup() when the conversion into ktime multiplies the given value with NSEC_PER_USEC (1000). Reference: https://marc.info/?l=linux-can&m=154732118819828&w=2 Add a check for the given tv_usec, so that the value stays below one second. Additionally limit the tv_sec value to a reasonable value for CAN related use-cases of 400 days and ensure all values to be positive. Reported-by: Kyungtae Kim <kt0755@gmail.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> # >= 2.6.26 Tested-by: Kyungtae Kim <kt0755@gmail.com> Acked-by: Andre Naujoks <nautsch2@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- net/can/bcm.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -67,6 +67,9 @@ */ #define MAX_NFRAMES 256 +/* limit timers to 400 days for sending/timeouts */ +#define BCM_TIMER_SEC_MAX (400 * 24 * 60 * 60) + /* use of last_frames[index].flags */ #define RX_RECV 0x40 /* received data for this element */ #define RX_THR 0x80 /* element not been sent due to throttle feature */ @@ -140,6 +143,22 @@ static inline ktime_t bcm_timeval_to_kti return ktime_set(tv.tv_sec, tv.tv_usec * NSEC_PER_USEC); } +/* check limitations for timeval provided by user */ +static bool bcm_is_invalid_tv(struct bcm_msg_head *msg_head) +{ + if ((msg_head->ival1.tv_sec < 0) || + (msg_head->ival1.tv_sec > BCM_TIMER_SEC_MAX) || + (msg_head->ival1.tv_usec < 0) || + (msg_head->ival1.tv_usec >= USEC_PER_SEC) || + (msg_head->ival2.tv_sec < 0) || + (msg_head->ival2.tv_sec > BCM_TIMER_SEC_MAX) || + (msg_head->ival2.tv_usec < 0) || + (msg_head->ival2.tv_usec >= USEC_PER_SEC)) + return true; + + return false; +} + #define CFSIZ(flags) ((flags & CAN_FD_FRAME) ? CANFD_MTU : CAN_MTU) #define OPSIZ sizeof(struct bcm_op) #define MHSIZ sizeof(struct bcm_msg_head) @@ -886,6 +905,10 @@ static int bcm_tx_setup(struct bcm_msg_h if (msg_head->nframes < 1 || msg_head->nframes > MAX_NFRAMES) return -EINVAL; + /* check timeval limitations */ + if ((msg_head->flags & SETTIMER) && bcm_is_invalid_tv(msg_head)) + return -EINVAL; + /* check the given can_id */ op = bcm_find_op(&bo->tx_ops, msg_head, ifindex); if (op) { @@ -1065,6 +1088,10 @@ static int bcm_rx_setup(struct bcm_msg_h (!(msg_head->can_id & CAN_RTR_FLAG)))) return -EINVAL; + /* check timeval limitations */ + if ((msg_head->flags & SETTIMER) && bcm_is_invalid_tv(msg_head)) + return -EINVAL; + /* check the given can_id */ op = bcm_find_op(&bo->rx_ops, msg_head, ifindex); if (op) {
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Nicolas Pitre <nicolas.pitre@linaro.org> commit 0c9b1965faddad7534b6974b5b36c4ad37998f8e upstream. User space using poll() on /dev/vcs devices are not awaken when a screen size change occurs. Let's fix that. Signed-off-by: Nicolas Pitre <nico@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/tty/vt/vt.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -953,6 +953,7 @@ static int vc_do_resize(struct tty_struc if (con_is_visible(vc)) update_screen(vc); vt_event_post(VT_EVENT_RESIZE, vc->vc_num, vc->vc_num); + notify_update(vc); return err; }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ [ Upstream commit 3d20c6246690219881786de10d2dda93f616d0ac ] Path passed to libdw for unwinding doesn't include symfs path if specified, so unwinding fails because ELF file is not found. Similar to unwinding with libunwind, pass symsrc_filename instead of long_name. If there is no symsrc_filename, fallback to long_name. Signed-off-by: Martin Vuille <jpmv27@aim.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20180211212420.18388-1-jpmv27@aim.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- tools/perf/util/unwind-libdw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/unwind-libdw.c b/tools/perf/util/unwind-libdw.c index 1e9c974faf67..8e969f28cc59 100644 --- a/tools/perf/util/unwind-libdw.c +++ b/tools/perf/util/unwind-libdw.c @@ -50,7 +50,7 @@ static int __report_module(struct addr_location *al, u64 ip, if (!mod) mod = dwfl_report_elf(ui->dwfl, dso->short_name, - dso->long_name, -1, al->map->start, + (dso->symsrc_filename ? dso->symsrc_filename : dso->long_name), -1, al->map->start, false); return mod && dwfl_addrmodule(ui->dwfl, ip) == mod ? 0 : -1; -- 2.19.1
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ [ Upstream commit 1fe627da30331024f453faef04d500079b901107 ] libdwfl parses an ELF file itself and creates mappings for the individual sections. perf on the other hand sees raw mmap events which represent individual sections. When we encounter an address pointing into a mapping with pgoff != 0, we must take that into account and report the file at the non-offset base address. This fixes unwinding with libdwfl in some cases. E.g. for a file like: ``` using namespace std; mutex g_mutex; double worker() { lock_guard<mutex> guard(g_mutex); uniform_real_distribution<double> uniform(-1E5, 1E5); default_random_engine engine; double s = 0; for (int i = 0; i < 1000; ++i) { s += norm(complex<double>(uniform(engine), uniform(engine))); } cout << s << endl; return s; } int main() { vector<std::future<double>> results; for (int i = 0; i < 10000; ++i) { results.push_back(async(launch::async, worker)); } return 0; } ``` Compile it with `g++ -g -O2 -lpthread cpp-locking.cpp -o cpp-locking`, then record it with `perf record --call-graph dwarf -e sched:sched_switch`. When you analyze it with `perf script` and libunwind, you should see: ``` cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120 ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux) 7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so) 7f38e4252d0b arena_get2.part.4+0x2fb (/usr/lib/libc-2.28.so) 7f38e4255b1c tcache_init.part.6+0xec (/usr/lib/libc-2.28.so) 7f38e42569e5 __GI___libc_malloc+0x115 (inlined) 7f38e4241790 __GI__IO_file_doallocate+0x90 (inlined) 7f38e424fbbf __GI__IO_doallocbuf+0x4f (inlined) 7f38e424ee47 __GI__IO_file_overflow+0x197 (inlined) 7f38e424df36 _IO_new_file_xsputn+0x116 (inlined) 7f38e4242bfb __GI__IO_fwrite+0xdb (inlined) 7f38e463fa6d std::basic_streambuf<char, std::char_traits<char> >::sputn(char const*, long)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> >::_M_put(char const*, long)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::__write<char>(std::ostreambuf_iterator<char, std::char_traits<char> >, char const*, int)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_float<double>(std::ostreambuf_iterator<c> 7f38e464bd70 std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, double) const+0x90 (inl> 7f38e464bd70 std::ostream& std::ostream::_M_insert<double>(double)+0x90 (/usr/lib/libstdc++.so.6.0.25) 563b9cb502f7 std::ostream::operator<<(double)+0xb7 (inlined) 563b9cb502f7 worker()+0xb7 (/ssd/milian/projects/kdab/rnd/hotspot/build/tests/test-clients/cpp-locking/cpp-locking) 563b9cb506fb double std::__invoke_impl<double, double (*)()>(std::__invoke_other, double (*&&)())+0x2b (inlined) 563b9cb506fb std::__invoke_result<double (*)()>::type std::__invoke<double (*)()>(double (*&&)())+0x2b (inlined) 563b9cb506fb decltype (__invoke((_S_declval<0ul>)())) std::thread::_Invoker<std::tuple<double (*)()> >::_M_invoke<0ul>(std::_Index_tuple<0ul>)+0x2b (inlined) 563b9cb506fb std::thread::_Invoker<std::tuple<double (*)()> >::operator()()+0x2b (inlined) 563b9cb506fb std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<double>, std::__future_base::_Result_base::_Deleter>, std::thread::_Invoker<std::tuple<double (*)()> >, dou> 563b9cb506fb std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_> 563b9cb507e8 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const+0x28 (inlined) 563b9cb507e8 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*)+0x28 (/ssd/milian/> 7f38e46d24fe __pthread_once_slow+0xbe (/usr/lib/libpthread-2.28.so) 563b9cb51149 __gthread_once+0xe9 (inlined) 563b9cb51149 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*)> 563b9cb51149 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool)+0xe9 (inlined) 563b9cb51149 std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double (*)()> >&&)::{lambda()#1}::op> 563b9cb51149 void std::__invoke_impl<void, std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double> 563b9cb51149 std::__invoke_result<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double (*)()> >> 563b9cb51149 decltype (__invoke((_S_declval<0ul>)())) std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_> 563b9cb51149 std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<dou> 563b9cb51149 std::thread::_State_impl<std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread> 7f38e45f0062 execute_native_thread_routine+0x12 (/usr/lib/libstdc++.so.6.0.25) 7f38e46caa9c start_thread+0xfc (/usr/lib/libpthread-2.28.so) 7f38e42ccb22 __GI___clone+0x42 (inlined) ``` Before this patch, using libdwfl, you would see: ``` cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120 ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux) 7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so) a041161e77950c5c [unknown] ([unknown]) ``` With this patch applied, we get a bit further in unwinding: ``` cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120 ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux) 7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so) 7f38e4252d0b arena_get2.part.4+0x2fb (/usr/lib/libc-2.28.so) 7f38e4255b1c tcache_init.part.6+0xec (/usr/lib/libc-2.28.so) 7f38e42569e5 __GI___libc_malloc+0x115 (inlined) 7f38e4241790 __GI__IO_file_doallocate+0x90 (inlined) 7f38e424fbbf __GI__IO_doallocbuf+0x4f (inlined) 7f38e424ee47 __GI__IO_file_overflow+0x197 (inlined) 7f38e424df36 _IO_new_file_xsputn+0x116 (inlined) 7f38e4242bfb __GI__IO_fwrite+0xdb (inlined) 7f38e463fa6d std::basic_streambuf<char, std::char_traits<char> >::sputn(char const*, long)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> >::_M_put(char const*, long)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::__write<char>(std::ostreambuf_iterator<char, std::char_traits<char> >, char const*, int)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_float<double>(std::ostreambuf_iterator<c> 7f38e464bd70 std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, double) const+0x90 (inl> 7f38e464bd70 std::ostream& std::ostream::_M_insert<double>(double)+0x90 (/usr/lib/libstdc++.so.6.0.25) 563b9cb502f7 std::ostream::operator<<(double)+0xb7 (inlined) 563b9cb502f7 worker()+0xb7 (/ssd/milian/projects/kdab/rnd/hotspot/build/tests/test-clients/cpp-locking/cpp-locking) 6eab825c1ee3e4ff [unknown] ([unknown]) ``` Note that the backtrace is still stopping too early, when compared to the nice results obtained via libunwind. It's unclear so far what the reason for that is. Committer note: Further comment by Milian on the thread started on the Link: tag below: --- The remaining issue is due to a bug in elfutils: https://sourceware.org/ml/elfutils-devel/2018-q4/msg00089.html With both patches applied, libunwind and elfutils produce the same output for the above scenario. --- Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181029141644.3907-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- tools/perf/util/unwind-libdw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/util/unwind-libdw.c b/tools/perf/util/unwind-libdw.c index 8e969f28cc59..f1fe5acdbba4 100644 --- a/tools/perf/util/unwind-libdw.c +++ b/tools/perf/util/unwind-libdw.c @@ -44,13 +44,13 @@ static int __report_module(struct addr_location *al, u64 ip, Dwarf_Addr s; dwfl_module_info(mod, NULL, &s, NULL, NULL, NULL, NULL, NULL); - if (s != al->map->start) + if (s != al->map->start - al->map->pgoff) mod = 0; } if (!mod) mod = dwfl_report_elf(ui->dwfl, dso->short_name, - (dso->symsrc_filename ? dso->symsrc_filename : dso->long_name), -1, al->map->start, + (dso->symsrc_filename ? dso->symsrc_filename : dso->long_name), -1, al->map->start - al->map->pgoff, false); return mod && dwfl_addrmodule(ui->dwfl, ip) == mod ? 0 : -1; -- 2.19.1
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ This reverts commit e65cd9a20343ea90f576c24c38ee85ab6e7d5fec. Tommi T. Rrantala notes: PTRACE_SECCOMP_GET_METADATA was only added in 4.16 (26500475ac1b499d8636ff281311d633909f5d20) And it's also breaking seccomp_bpf.c compilation for me: seccomp_bpf.c: In function ‘get_metadata’: seccomp_bpf.c:2878:26: error: storage size of ‘md’ isn’t known struct seccomp_metadata md; Signed-off-by: Sasha Levin <sashal@kernel.org> --- tools/testing/selftests/seccomp/seccomp_bpf.c | 61 ------------------- 1 file changed, 61 deletions(-) diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index e350cf3d4f90..194759ec9e70 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -145,15 +145,6 @@ struct seccomp_data { #define SECCOMP_FILTER_FLAG_SPEC_ALLOW (1UL << 2) #endif -#ifndef PTRACE_SECCOMP_GET_METADATA -#define PTRACE_SECCOMP_GET_METADATA 0x420d - -struct seccomp_metadata { - __u64 filter_off; /* Input: which filter */ - __u64 flags; /* Output: filter's flags */ -}; -#endif - #ifndef seccomp int seccomp(unsigned int op, unsigned int flags, void *args) { @@ -2870,58 +2861,6 @@ TEST(get_action_avail) EXPECT_EQ(errno, EOPNOTSUPP); } -TEST(get_metadata) -{ - pid_t pid; - int pipefd[2]; - char buf; - struct seccomp_metadata md; - - ASSERT_EQ(0, pipe(pipefd)); - - pid = fork(); - ASSERT_GE(pid, 0); - if (pid == 0) { - struct sock_filter filter[] = { - BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_ALLOW), - }; - struct sock_fprog prog = { - .len = (unsigned short)ARRAY_SIZE(filter), - .filter = filter, - }; - - /* one with log, one without */ - ASSERT_EQ(0, seccomp(SECCOMP_SET_MODE_FILTER, - SECCOMP_FILTER_FLAG_LOG, &prog)); - ASSERT_EQ(0, seccomp(SECCOMP_SET_MODE_FILTER, 0, &prog)); - - ASSERT_EQ(0, close(pipefd[0])); - ASSERT_EQ(1, write(pipefd[1], "1", 1)); - ASSERT_EQ(0, close(pipefd[1])); - - while (1) - sleep(100); - } - - ASSERT_EQ(0, close(pipefd[1])); - ASSERT_EQ(1, read(pipefd[0], &buf, 1)); - - ASSERT_EQ(0, ptrace(PTRACE_ATTACH, pid)); - ASSERT_EQ(pid, waitpid(pid, NULL, 0)); - - md.filter_off = 0; - ASSERT_EQ(sizeof(md), ptrace(PTRACE_SECCOMP_GET_METADATA, pid, sizeof(md), &md)); - EXPECT_EQ(md.flags, SECCOMP_FILTER_FLAG_LOG); - EXPECT_EQ(md.filter_off, 0); - - md.filter_off = 1; - ASSERT_EQ(sizeof(md), ptrace(PTRACE_SECCOMP_GET_METADATA, pid, sizeof(md), &md)); - EXPECT_EQ(md.flags, 0); - EXPECT_EQ(md.filter_off, 1); - - ASSERT_EQ(0, kill(pid, SIGKILL)); -} - /* * TODO: * - add microbenchmarks -- 2.19.1
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Jose Abreu <Jose.Abreu@synopsys.com> commit 52a76235d0c4dd259cd0df503afed4757c04ba1d upstream. Currently we are using all the available fifo size in RQS and TQS fields. This will not work correctly in multi-queues IP's because total fifo size must be splitted to the enabled queues. Correct this by computing the available fifo size per queue and setting the right value in TQS and RQS fields. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/ethernet/stmicro/stmmac/common.h | 3 ++- drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 15 +++++++++------ drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 22 ++++++++++++++++++++-- 3 files changed, 31 insertions(+), 9 deletions(-) --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -444,7 +444,8 @@ struct stmmac_dma_ops { int rxfifosz); void (*dma_rx_mode)(void __iomem *ioaddr, int mode, u32 channel, int fifosz); - void (*dma_tx_mode)(void __iomem *ioaddr, int mode, u32 channel); + void (*dma_tx_mode)(void __iomem *ioaddr, int mode, u32 channel, + int fifosz); /* To track extra statistic (if supported) */ void (*dma_diagnostic_fr) (void *data, struct stmmac_extra_stats *x, void __iomem *ioaddr); --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c @@ -271,9 +271,10 @@ static void dwmac4_dma_rx_chan_op_mode(v } static void dwmac4_dma_tx_chan_op_mode(void __iomem *ioaddr, int mode, - u32 channel) + u32 channel, int fifosz) { u32 mtl_tx_op = readl(ioaddr + MTL_CHAN_TX_OP_MODE(channel)); + unsigned int tqs = fifosz / 256 - 1; if (mode == SF_DMA_MODE) { pr_debug("GMAC: enable TX store and forward mode\n"); @@ -306,12 +307,14 @@ static void dwmac4_dma_tx_chan_op_mode(v * For an IP with DWC_EQOS_NUM_TXQ > 1, the fields TXQEN and TQS are R/W * with reset values: TXQEN off, TQS 256 bytes. * - * Write the bits in both cases, since it will have no effect when RO. - * For DWC_EQOS_NUM_TXQ > 1, the top bits in MTL_OP_MODE_TQS_MASK might - * be RO, however, writing the whole TQS field will result in a value - * equal to DWC_EQOS_TXFIFO_SIZE, just like for DWC_EQOS_NUM_TXQ == 1. + * TXQEN must be written for multi-channel operation and TQS must + * reflect the available fifo size per queue (total fifo size / number + * of enabled queues). */ - mtl_tx_op |= MTL_OP_MODE_TXQEN | MTL_OP_MODE_TQS_MASK; + mtl_tx_op |= MTL_OP_MODE_TXQEN; + mtl_tx_op &= ~MTL_OP_MODE_TQS_MASK; + mtl_tx_op |= tqs << MTL_OP_MODE_TQS_SHIFT; + writel(mtl_tx_op, ioaddr + MTL_CHAN_TX_OP_MODE(channel)); } --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1765,12 +1765,19 @@ static void stmmac_dma_operation_mode(st u32 rx_channels_count = priv->plat->rx_queues_to_use; u32 tx_channels_count = priv->plat->tx_queues_to_use; int rxfifosz = priv->plat->rx_fifo_size; + int txfifosz = priv->plat->tx_fifo_size; u32 txmode = 0; u32 rxmode = 0; u32 chan = 0; if (rxfifosz == 0) rxfifosz = priv->dma_cap.rx_fifo_size; + if (txfifosz == 0) + txfifosz = priv->dma_cap.tx_fifo_size; + + /* Adjust for real per queue fifo size */ + rxfifosz /= rx_channels_count; + txfifosz /= tx_channels_count; if (priv->plat->force_thresh_dma_mode) { txmode = tc; @@ -1798,7 +1805,8 @@ static void stmmac_dma_operation_mode(st rxfifosz); for (chan = 0; chan < tx_channels_count; chan++) - priv->hw->dma->dma_tx_mode(priv->ioaddr, txmode, chan); + priv->hw->dma->dma_tx_mode(priv->ioaddr, txmode, chan, + txfifosz); } else { priv->hw->dma->dma_mode(priv->ioaddr, txmode, rxmode, rxfifosz); @@ -1967,15 +1975,25 @@ static void stmmac_tx_err(struct stmmac_ static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode, u32 rxmode, u32 chan) { + u32 rx_channels_count = priv->plat->rx_queues_to_use; + u32 tx_channels_count = priv->plat->tx_queues_to_use; int rxfifosz = priv->plat->rx_fifo_size; + int txfifosz = priv->plat->tx_fifo_size; if (rxfifosz == 0) rxfifosz = priv->dma_cap.rx_fifo_size; + if (txfifosz == 0) + txfifosz = priv->dma_cap.tx_fifo_size; + + /* Adjust for real per queue fifo size */ + rxfifosz /= rx_channels_count; + txfifosz /= tx_channels_count; if (priv->synopsys_id >= DWMAC_CORE_4_00) { priv->hw->dma->dma_rx_mode(priv->ioaddr, rxmode, chan, rxfifosz); - priv->hw->dma->dma_tx_mode(priv->ioaddr, txmode, chan); + priv->hw->dma->dma_tx_mode(priv->ioaddr, txmode, chan, + txfifosz); } else { priv->hw->dma->dma_mode(priv->ioaddr, txmode, rxmode, rxfifosz);
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Sean Christopherson <sean.j.christopherson@intel.com> Upstream commit: f775b13eedee ("x86,kvm: move qemu/guest FPU switching out to vcpu_run") introduced a bug, which was later fixed by upstream commit: 5663d8f9bbe4 ("kvm: x86: fix WARN due to uninitialized guest FPU state") For reasons unknown, both commits were initially passed-over for inclusion in the 4.14 stable branch despite being tagged for stable. Eventually, someone noticed that the fixup, commit 5663d8f9bbe4, was missing from stable[1], and so it was queued up for 4.14 and included in release v4.14.79. Even later, the original buggy patch, commit f775b13eedee, was also applied to the 4.14 stable branch. Through an unlucky coincidence, the incorrect ordering did not generate a conflict between the two patches, and led to v4.14.94 and later releases containing a spurious call to kvm_load_guest_fpu() in kvm_arch_vcpu_ioctl_run(). As a result, KVM may reload stale guest FPU state, e.g. after accepting in INIT event. This can manifest as crashes during boot, segfaults, failed checksums and so on and so forth. Remove the unwanted kvm_{load,put}_guest_fpu() calls, i.e. make kvm_arch_vcpu_ioctl_run() look like commit 5663d8f9bbe4 was backported after commit f775b13eedee. [1] https://www.spinics.net/lists/stable/msg263931.html Fixes: 4124a4cff344 ("x86,kvm: move qemu/guest FPU switching out to vcpu_run") Cc: stable@vger.kernel.org Cc: Sasha Levin <sashal@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Reported-by: Roman Mamedov Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/x86/kvm/x86.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7422,14 +7422,12 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_v } } - kvm_load_guest_fpu(vcpu); - if (unlikely(vcpu->arch.complete_userspace_io)) { int (*cui)(struct kvm_vcpu *) = vcpu->arch.complete_userspace_io; vcpu->arch.complete_userspace_io = NULL; r = cui(vcpu); if (r <= 0) - goto out_fpu; + goto out; } else WARN_ON(vcpu->arch.pio.count || vcpu->mmio_needed); @@ -7438,8 +7436,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_v else r = vcpu_run(vcpu); -out_fpu: - kvm_put_guest_fpu(vcpu); out: kvm_put_guest_fpu(vcpu); post_kvm_run_save(vcpu);
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: David Hildenbrand <david@redhat.com> commit 60f1bf29c0b2519989927cae640cd1f50f59dc7f upstream. When calling smp_call_ipl_cpu() from the IPL CPU, we will try to read from pcpu_devices->lowcore. However, due to prefixing, that will result in reading from absolute address 0 on that CPU. We have to go via the actual lowcore instead. This means that right now, we will read lc->nodat_stack == 0 and therfore work on a very wrong stack. This BUG essentially broke rebooting under QEMU TCG (which will report a low address protection exception). And checking under KVM, it is also broken under KVM. With 1 VCPU it can be easily triggered. :/# echo 1 > /proc/sys/kernel/sysrq :/# echo b > /proc/sysrq-trigger [ 28.476745] sysrq: SysRq : Resetting [ 28.476793] Kernel stack overflow. [ 28.476817] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13 [ 28.476820] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476826] Krnl PSW : 0400c00180000000 0000000000115c0c (pcpu_delegate+0x12c/0x140) [ 28.476861] R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 [ 28.476863] Krnl GPRS: ffffffffffffffff 0000000000000000 000000000010dff8 0000000000000000 [ 28.476864] 0000000000000000 0000000000000000 0000000000ab7090 000003e0006efbf0 [ 28.476864] 000000000010dff8 0000000000000000 0000000000000000 0000000000000000 [ 28.476865] 000000007fffc000 0000000000730408 000003e0006efc58 0000000000000000 [ 28.476887] Krnl Code: 0000000000115bfe: 4170f000 la %r7,0(%r15) [ 28.476887] 0000000000115c02: 41f0a000 la %r15,0(%r10) [ 28.476887] #0000000000115c06: e370f0980024 stg %r7,152(%r15) [ 28.476887] >0000000000115c0c: c0e5fffff86e brasl %r14,114ce8 [ 28.476887] 0000000000115c12: 41f07000 la %r15,0(%r7) [ 28.476887] 0000000000115c16: a7f4ffa8 brc 15,115b66 [ 28.476887] 0000000000115c1a: 0707 bcr 0,%r7 [ 28.476887] 0000000000115c1c: 0707 bcr 0,%r7 [ 28.476901] Call Trace: [ 28.476902] Last Breaking-Event-Address: [ 28.476920] [<0000000000a01c4a>] arch_call_rest_init+0x22/0x80 [ 28.476927] Kernel panic - not syncing: Corrupt kernel stack, can't continue. [ 28.476930] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13 [ 28.476932] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476932] Call Trace: Fixes: 2f859d0dad81 ("s390/smp: reduce size of struct pcpu") Cc: stable@vger.kernel.org # 4.0+ Reported-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/s390/kernel/smp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -387,9 +387,13 @@ void smp_call_online_cpu(void (*func)(vo */ void smp_call_ipl_cpu(void (*func)(void *), void *data) { + struct lowcore *lc = pcpu_devices->lowcore; + + if (pcpu_devices[0].address == stap()) + lc = &S390_lowcore; + pcpu_delegate(&pcpu_devices[0], func, data, - pcpu_devices->lowcore->panic_stack - - PANIC_FRAME_OFFSET + PAGE_SIZE); + lc->panic_stack - PANIC_FRAME_OFFSET + PAGE_SIZE); } int smp_find_processor_id(u16 address)
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Israel Rukshin <israelr@mellanox.com> commit ad1f824948e4ed886529219cf7cd717d078c630d upstream. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/nvme/target/rdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -189,7 +189,7 @@ nvmet_rdma_put_rsp(struct nvmet_rdma_rsp { unsigned long flags; - if (rsp->allocated) { + if (unlikely(rsp->allocated)) { kfree(rsp); return; }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Raju Rangoju <rajur@chelsio.com> commit 5cbab6303b4791a3e6713dfe2c5fda6a867f9adc upstream. Under heavy load if we don't have any pre-allocated rsps left, we dynamically allocate a rsp, but we are not actually allocating memory for nvme_completion (rsp->req.rsp). In such a case, accessing pointer fields (req->rsp->status) in nvmet_req_init() will result in crash. To fix this, allocate the memory for nvme_completion by calling nvmet_rdma_alloc_rsp() Fixes: 8407879c("nvmet-rdma:fix possible bogus dereference under heavy load") Cc: <stable@vger.kernel.org> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/nvme/target/rdma.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -137,6 +137,10 @@ static void nvmet_rdma_recv_done(struct static void nvmet_rdma_read_data_done(struct ib_cq *cq, struct ib_wc *wc); static void nvmet_rdma_qp_event(struct ib_event *event, void *priv); static void nvmet_rdma_queue_disconnect(struct nvmet_rdma_queue *queue); +static void nvmet_rdma_free_rsp(struct nvmet_rdma_device *ndev, + struct nvmet_rdma_rsp *r); +static int nvmet_rdma_alloc_rsp(struct nvmet_rdma_device *ndev, + struct nvmet_rdma_rsp *r); static struct nvmet_fabrics_ops nvmet_rdma_ops; @@ -175,9 +179,17 @@ nvmet_rdma_get_rsp(struct nvmet_rdma_que spin_unlock_irqrestore(&queue->rsps_lock, flags); if (unlikely(!rsp)) { - rsp = kmalloc(sizeof(*rsp), GFP_KERNEL); + int ret; + + rsp = kzalloc(sizeof(*rsp), GFP_KERNEL); if (unlikely(!rsp)) return NULL; + ret = nvmet_rdma_alloc_rsp(queue->dev, rsp); + if (unlikely(ret)) { + kfree(rsp); + return NULL; + } + rsp->allocated = true; } @@ -190,6 +202,7 @@ nvmet_rdma_put_rsp(struct nvmet_rdma_rsp unsigned long flags; if (unlikely(rsp->allocated)) { + nvmet_rdma_free_rsp(rsp->queue->dev, rsp); kfree(rsp); return; }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Jack Pham <jackp@codeaurora.org> commit bd6742249b9ca918565e4e3abaa06665e587f4b5 upstream. OUT endpoint requests may somtimes have this flag set when preparing to be submitted to HW indicating that there is an additional TRB chained to the request for alignment purposes. If that request is removed before the controller can execute the transfer (e.g. ep_dequeue/ep_disable), the request will not go through the dwc3_gadget_ep_cleanup_completed_request() handler and will not have its needs_extra_trb flag cleared when dwc3_gadget_giveback() is called. This same request could be later requeued for a new transfer that does not require an extra TRB and if it is successfully completed, the cleanup and TRB reclamation will incorrectly process the additional TRB which belongs to the next request, and incorrectly advances the TRB dequeue pointer, thereby messing up calculation of the next requeust's actual/remaining count when it completes. The right thing to do here is to ensure that the flag is cleared before it is given back to the function driver. A good place to do that is in dwc3_gadget_del_and_unmap_request(). Fixes: c6267a51639b ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: stable@vger.kernel.org Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> [jackp: backport to <= 4.20: replaced 'needs_extra_trb' with 'unaligned' and 'zero' members in patch and reworded commit text] Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/dwc3/gadget.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -182,6 +182,8 @@ void dwc3_gadget_del_and_unmap_request(s req->started = false; list_del(&req->list); req->remaining = 0; + req->unaligned = false; + req->zero = false; if (req->request.status == -EINPROGRESS) req->request.status = status;
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Mathias Nyman <mathias.nyman@linux.intel.com> commit f068090426ea8d72c408ebd42953a82a88e2282c upstream. Ensure that the shared_hcd pointer is valid when calling usb_put_hcd() The shared_hcd is removed and freed in xhci by first calling usb_remove_hcd(xhci->shared_hcd), and later usb_put_hcd(xhci->shared_hcd) Afer commit fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") the shared_hcd was never properly put as xhci->shared_hcd was set to NULL before usb_put_hcd(xhci->shared_hcd) was called. shared_hcd (USB3) is removed before primary hcd (USB2). While removing the primary hcd we might need to handle xhci interrupts to cleanly remove last USB2 devices, therefore we need to set xhci->shared_hcd to NULL before removing the primary hcd to let xhci interrupt handler know shared_hcd is no longer available. xhci-plat.c, xhci-histb.c and xhci-mtk first create both their hcd's before adding them. so to keep the correct reverse removal order use a temporary shared_hcd variable for them. For more details see commit 4ac53087d6d4 ("usb: xhci: plat: Create both HCDs before adding them") Fixes: fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") Cc: Joel Stanley <joel@jms.id.au> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: <stable@vger.kernel.org> Reported-by: Jack Pham <jackp@codeaurora.org> Tested-by: Jack Pham <jackp@codeaurora.org> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/host/xhci-mtk.c | 6 ++++-- drivers/usb/host/xhci-pci.c | 1 + drivers/usb/host/xhci-plat.c | 6 ++++-- drivers/usb/host/xhci-tegra.c | 1 + drivers/usb/host/xhci.c | 2 -- 5 files changed, 10 insertions(+), 6 deletions(-) --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -724,14 +724,16 @@ static int xhci_mtk_remove(struct platfo struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev); struct usb_hcd *hcd = mtk->hcd; struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct usb_hcd *shared_hcd = xhci->shared_hcd; - usb_remove_hcd(xhci->shared_hcd); + usb_remove_hcd(shared_hcd); + xhci->shared_hcd = NULL; xhci_mtk_phy_power_off(mtk); xhci_mtk_phy_exit(mtk); device_init_wakeup(&dev->dev, false); usb_remove_hcd(hcd); - usb_put_hcd(xhci->shared_hcd); + usb_put_hcd(shared_hcd); usb_put_hcd(hcd); xhci_mtk_sch_exit(mtk); xhci_mtk_clks_disable(mtk); --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -370,6 +370,7 @@ static void xhci_pci_remove(struct pci_d if (xhci->shared_hcd) { usb_remove_hcd(xhci->shared_hcd); usb_put_hcd(xhci->shared_hcd); + xhci->shared_hcd = NULL; } /* Workaround for spurious wakeups at shutdown with HSW */ --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -332,14 +332,16 @@ static int xhci_plat_remove(struct platf struct usb_hcd *hcd = platform_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct clk *clk = xhci->clk; + struct usb_hcd *shared_hcd = xhci->shared_hcd; xhci->xhc_state |= XHCI_STATE_REMOVING; - usb_remove_hcd(xhci->shared_hcd); + usb_remove_hcd(shared_hcd); + xhci->shared_hcd = NULL; usb_phy_shutdown(hcd->usb_phy); usb_remove_hcd(hcd); - usb_put_hcd(xhci->shared_hcd); + usb_put_hcd(shared_hcd); if (!IS_ERR(clk)) clk_disable_unprepare(clk); --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1178,6 +1178,7 @@ static int tegra_xusb_remove(struct plat usb_remove_hcd(xhci->shared_hcd); usb_put_hcd(xhci->shared_hcd); + xhci->shared_hcd = NULL; usb_remove_hcd(tegra->hcd); usb_put_hcd(tegra->hcd); --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -669,8 +669,6 @@ static void xhci_stop(struct usb_hcd *hc /* Only halt host and free memory after both hcds are removed */ if (!usb_hcd_is_primary_hcd(hcd)) { - /* usb core will free this hcd shortly, unset pointer */ - xhci->shared_hcd = NULL; mutex_unlock(&xhci->mutex); return; }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Joao Martins <joao.m.martins@oracle.com> commit 001f60e1f662a6dee1630a2915401aaf5959d479 upstream. In the event of moving pvclock_pvti_cpu0_va() definition to common pvclock code, this function would return a value on non KVM guests. Later on this would fail with a GPF on ptp_kvm_init when running on a Xen guest. Therefore, ptp_kvm_init() should check whether it is running in a KVM guest. Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Acked-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/ptp/ptp_kvm.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/ptp/ptp_kvm.c +++ b/drivers/ptp/ptp_kvm.c @@ -178,6 +178,9 @@ static int __init ptp_kvm_init(void) { long ret; + if (!kvm_para_available()) + return -ENODEV; + clock_pair_gpa = slow_virt_to_phys(&clock_pair); hv_clock = pvclock_pvti_cpu0_va();
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Joao Martins <joao.m.martins@oracle.com> commit 9f08890ab906abaf9d4c1bad8111755cbd302260 upstream. Right now there is only a pvclock_pvti_cpu0_va() which is defined on kvmclock since: commit dac16fba6fc5 ("x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap") The only user of this interface so far is kvm. This commit adds a setter function for the pvti page and moves pvclock_pvti_cpu0_va to pvclock, which is a more generic place to have it; and would allow other PV clocksources to use it, such as Xen. While moving pvclock_pvti_cpu0_va into pvclock, rename also this function to pvclock_get_pvti_cpu0_va (including its call sites) to be symmetric with the setter (pvclock_set_pvti_cpu0_va). Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/x86/entry/vdso/vma.c | 2 +- arch/x86/include/asm/pvclock.h | 19 ++++++++++--------- arch/x86/kernel/kvmclock.c | 7 +------ arch/x86/kernel/pvclock.c | 14 ++++++++++++++ drivers/ptp/ptp_kvm.c | 2 +- 5 files changed, 27 insertions(+), 17 deletions(-) --- a/arch/x86/entry/vdso/vma.c +++ b/arch/x86/entry/vdso/vma.c @@ -112,7 +112,7 @@ static int vvar_fault(const struct vm_sp __pa_symbol(&__vvar_page) >> PAGE_SHIFT); } else if (sym_offset == image->sym_pvclock_page) { struct pvclock_vsyscall_time_info *pvti = - pvclock_pvti_cpu0_va(); + pvclock_get_pvti_cpu0_va(); if (pvti && vclock_was_used(VCLOCK_PVCLOCK)) { ret = vm_insert_pfn( vma, --- a/arch/x86/include/asm/pvclock.h +++ b/arch/x86/include/asm/pvclock.h @@ -5,15 +5,6 @@ #include <linux/clocksource.h> #include <asm/pvclock-abi.h> -#ifdef CONFIG_KVM_GUEST -extern struct pvclock_vsyscall_time_info *pvclock_pvti_cpu0_va(void); -#else -static inline struct pvclock_vsyscall_time_info *pvclock_pvti_cpu0_va(void) -{ - return NULL; -} -#endif - /* some helper functions for xen and kvm pv clock sources */ u64 pvclock_clocksource_read(struct pvclock_vcpu_time_info *src); u8 pvclock_read_flags(struct pvclock_vcpu_time_info *src); @@ -102,4 +93,14 @@ struct pvclock_vsyscall_time_info { #define PVTI_SIZE sizeof(struct pvclock_vsyscall_time_info) +#ifdef CONFIG_PARAVIRT_CLOCK +void pvclock_set_pvti_cpu0_va(struct pvclock_vsyscall_time_info *pvti); +struct pvclock_vsyscall_time_info *pvclock_get_pvti_cpu0_va(void); +#else +static inline struct pvclock_vsyscall_time_info *pvclock_get_pvti_cpu0_va(void) +{ + return NULL; +} +#endif + #endif /* _ASM_X86_PVCLOCK_H */ --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -47,12 +47,6 @@ early_param("no-kvmclock", parse_no_kvmc static struct pvclock_vsyscall_time_info *hv_clock; static struct pvclock_wall_clock wall_clock; -struct pvclock_vsyscall_time_info *pvclock_pvti_cpu0_va(void) -{ - return hv_clock; -} -EXPORT_SYMBOL_GPL(pvclock_pvti_cpu0_va); - /* * The wallclock is the time of day when we booted. Since then, some time may * have elapsed since the hypervisor wrote the data. So we try to account for @@ -335,6 +329,7 @@ int __init kvm_setup_vsyscall_timeinfo(v return 1; } + pvclock_set_pvti_cpu0_va(hv_clock); put_cpu(); kvm_clock.archdata.vclock_mode = VCLOCK_PVCLOCK; --- a/arch/x86/kernel/pvclock.c +++ b/arch/x86/kernel/pvclock.c @@ -25,8 +25,10 @@ #include <asm/fixmap.h> #include <asm/pvclock.h> +#include <asm/vgtod.h> static u8 valid_flags __read_mostly = 0; +static struct pvclock_vsyscall_time_info *pvti_cpu0_va __read_mostly; void pvclock_set_flags(u8 flags) { @@ -144,3 +146,15 @@ void pvclock_read_wallclock(struct pvclo set_normalized_timespec(ts, now.tv_sec, now.tv_nsec); } + +void pvclock_set_pvti_cpu0_va(struct pvclock_vsyscall_time_info *pvti) +{ + WARN_ON(vclock_was_used(VCLOCK_PVCLOCK)); + pvti_cpu0_va = pvti; +} + +struct pvclock_vsyscall_time_info *pvclock_get_pvti_cpu0_va(void) +{ + return pvti_cpu0_va; +} +EXPORT_SYMBOL_GPL(pvclock_get_pvti_cpu0_va); --- a/drivers/ptp/ptp_kvm.c +++ b/drivers/ptp/ptp_kvm.c @@ -182,7 +182,7 @@ static int __init ptp_kvm_init(void) return -ENODEV; clock_pair_gpa = slow_virt_to_phys(&clock_pair); - hv_clock = pvclock_pvti_cpu0_va(); + hv_clock = pvclock_get_pvti_cpu0_va(); if (!hv_clock) return -ENODEV;
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Joao Martins <joao.m.martins@oracle.com> commit b888808093113ae7d63d213272d01fea4b8329ed upstream. Specifically check for PVCLOCK_TSC_STABLE_BIT and if this bit is set, then set it too on pvclock flags. This allows Xen clocksource to use it and thus speeding up xen_clocksource_read() callers (i.e. sched_clock()) Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/x86/xen/time.c | 9 +++++++++ 1 file changed, 9 insertions(+) --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -373,6 +373,7 @@ static const struct pv_time_ops xen_time static void __init xen_time_init(void) { + struct pvclock_vcpu_time_info *pvti; int cpu = smp_processor_id(); struct timespec tp; @@ -396,6 +397,14 @@ static void __init xen_time_init(void) setup_force_cpu_cap(X86_FEATURE_TSC); + /* + * We check ahead on the primary time info if this + * bit is supported hence speeding up Xen clocksource. + */ + pvti = &__this_cpu_read(xen_vcpu)->time; + if (pvti->flags & PVCLOCK_TSC_STABLE_BIT) + pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT); + xen_setup_runstate_info(cpu); xen_setup_timer(cpu); xen_setup_cpu_clockevents();
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Joao Martins <joao.m.martins@oracle.com> commit 2229f70b5bbb025e1394b61007938a68060afbfb upstream. In order to support pvclock vdso on xen we need to setup the time info page for vcpu 0 and register the page with Xen using the VCPUOP_register_vcpu_time_memory_area hypercall. This hypercall will also forcefully update the pvti which will set some of the necessary flags for vdso. Afterwards we check if it supports the PVCLOCK_TSC_STABLE_BIT flag which is mandatory for having vdso/vsyscall support. And if so, it will set the cpu 0 pvti that will be later on used when mapping the vdso image. The xen headers are also updated to include the new hypercall for registering the secondary vcpu_time_info struct. Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/x86/xen/suspend.c | 4 + arch/x86/xen/time.c | 90 ++++++++++++++++++++++++++++++++++++++++++- arch/x86/xen/xen-ops.h | 2 include/xen/interface/vcpu.h | 42 ++++++++++++++++++++ 4 files changed, 137 insertions(+), 1 deletion(-) --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -22,6 +22,8 @@ static DEFINE_PER_CPU(u64, spec_ctrl); void xen_arch_pre_suspend(void) { + xen_save_time_memory_area(); + if (xen_pv_domain()) xen_pv_pre_suspend(); } @@ -32,6 +34,8 @@ void xen_arch_post_suspend(int cancelled xen_pv_post_suspend(cancelled); else xen_hvm_post_suspend(cancelled); + + xen_restore_time_memory_area(); } static void xen_vcpu_notify_restore(void *data) --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -371,6 +371,92 @@ static const struct pv_time_ops xen_time .steal_clock = xen_steal_clock, }; +static struct pvclock_vsyscall_time_info *xen_clock __read_mostly; + +void xen_save_time_memory_area(void) +{ + struct vcpu_register_time_memory_area t; + int ret; + + if (!xen_clock) + return; + + t.addr.v = NULL; + + ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t); + if (ret != 0) + pr_notice("Cannot save secondary vcpu_time_info (err %d)", + ret); + else + clear_page(xen_clock); +} + +void xen_restore_time_memory_area(void) +{ + struct vcpu_register_time_memory_area t; + int ret; + + if (!xen_clock) + return; + + t.addr.v = &xen_clock->pvti; + + ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t); + + /* + * We don't disable VCLOCK_PVCLOCK entirely if it fails to register the + * secondary time info with Xen or if we migrated to a host without the + * necessary flags. On both of these cases what happens is either + * process seeing a zeroed out pvti or seeing no PVCLOCK_TSC_STABLE_BIT + * bit set. Userspace checks the latter and if 0, it discards the data + * in pvti and fallbacks to a system call for a reliable timestamp. + */ + if (ret != 0) + pr_notice("Cannot restore secondary vcpu_time_info (err %d)", + ret); +} + +static void xen_setup_vsyscall_time_info(void) +{ + struct vcpu_register_time_memory_area t; + struct pvclock_vsyscall_time_info *ti; + int ret; + + ti = (struct pvclock_vsyscall_time_info *)get_zeroed_page(GFP_KERNEL); + if (!ti) + return; + + t.addr.v = &ti->pvti; + + ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t); + if (ret) { + pr_notice("xen: VCLOCK_PVCLOCK not supported (err %d)\n", ret); + free_page((unsigned long)ti); + return; + } + + /* + * If primary time info had this bit set, secondary should too since + * it's the same data on both just different memory regions. But we + * still check it in case hypervisor is buggy. + */ + if (!(ti->pvti.flags & PVCLOCK_TSC_STABLE_BIT)) { + t.addr.v = NULL; + ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, + 0, &t); + if (!ret) + free_page((unsigned long)ti); + + pr_notice("xen: VCLOCK_PVCLOCK not supported (tsc unstable)\n"); + return; + } + + xen_clock = ti; + pvclock_set_pvti_cpu0_va(xen_clock); + + xen_clocksource.archdata.vclock_mode = VCLOCK_PVCLOCK; +} + static void __init xen_time_init(void) { struct pvclock_vcpu_time_info *pvti; @@ -402,8 +488,10 @@ static void __init xen_time_init(void) * bit is supported hence speeding up Xen clocksource. */ pvti = &__this_cpu_read(xen_vcpu)->time; - if (pvti->flags & PVCLOCK_TSC_STABLE_BIT) + if (pvti->flags & PVCLOCK_TSC_STABLE_BIT) { pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT); + xen_setup_vsyscall_time_info(); + } xen_setup_runstate_info(cpu); xen_setup_timer(cpu); --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -70,6 +70,8 @@ void xen_setup_runstate_info(int cpu); void xen_teardown_timer(int cpu); u64 xen_clocksource_read(void); void xen_setup_cpu_clockevents(void); +void xen_save_time_memory_area(void); +void xen_restore_time_memory_area(void); void __init xen_init_time_ops(void); void __init xen_hvm_init_time_ops(void); --- a/include/xen/interface/vcpu.h +++ b/include/xen/interface/vcpu.h @@ -178,4 +178,46 @@ DEFINE_GUEST_HANDLE_STRUCT(vcpu_register /* Send an NMI to the specified VCPU. @extra_arg == NULL. */ #define VCPUOP_send_nmi 11 + +/* + * Get the physical ID information for a pinned vcpu's underlying physical + * processor. The physical ID informmation is architecture-specific. + * On x86: id[31:0]=apic_id, id[63:32]=acpi_id. + * This command returns -EINVAL if it is not a valid operation for this VCPU. + */ +#define VCPUOP_get_physid 12 /* arg == vcpu_get_physid_t */ +struct vcpu_get_physid { + uint64_t phys_id; +}; +DEFINE_GUEST_HANDLE_STRUCT(vcpu_get_physid); +#define xen_vcpu_physid_to_x86_apicid(physid) ((uint32_t)(physid)) +#define xen_vcpu_physid_to_x86_acpiid(physid) ((uint32_t)((physid) >> 32)) + +/* + * Register a memory location to get a secondary copy of the vcpu time + * parameters. The master copy still exists as part of the vcpu shared + * memory area, and this secondary copy is updated whenever the master copy + * is updated (and using the same versioning scheme for synchronisation). + * + * The intent is that this copy may be mapped (RO) into userspace so + * that usermode can compute system time using the time info and the + * tsc. Usermode will see an array of vcpu_time_info structures, one + * for each vcpu, and choose the right one by an existing mechanism + * which allows it to get the current vcpu number (such as via a + * segment limit). It can then apply the normal algorithm to compute + * system time from the tsc. + * + * @extra_arg == pointer to vcpu_register_time_info_memory_area structure. + */ +#define VCPUOP_register_vcpu_time_memory_area 13 +DEFINE_GUEST_HANDLE_STRUCT(vcpu_time_info); +struct vcpu_register_time_memory_area { + union { + GUEST_HANDLE(vcpu_time_info) h; + struct pvclock_vcpu_time_info *v; + uint64_t p; + } addr; +}; +DEFINE_GUEST_HANDLE_STRUCT(vcpu_register_time_memory_area); + #endif /* __XEN_PUBLIC_VCPU_H__ */
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Pavel Tatashin <pasha.tatashin@oracle.com> commit 38669ba205d178d2d38bfd194a196d65a44d5af2 upstream. It is expected for sched_clock() to output data from 0, when system boots. Add an offset xen_sched_clock_offset (similarly how it is done in other hypervisors i.e. kvm_sched_clock_offset) to count sched_clock() from 0, when time is first initialized. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-14-pasha.tatashin@oracle.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/x86/xen/time.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -31,6 +31,8 @@ /* Xen may fire a timer up to this many ns early */ #define TIMER_SLOP 100000 +static u64 xen_sched_clock_offset __read_mostly; + /* Get the TSC speed from Xen */ static unsigned long xen_tsc_khz(void) { @@ -57,6 +59,11 @@ static u64 xen_clocksource_get_cycles(st return xen_clocksource_read(); } +static u64 xen_sched_clock(void) +{ + return xen_clocksource_read() - xen_sched_clock_offset; +} + static void xen_read_wallclock(struct timespec *ts) { struct shared_info *s = HYPERVISOR_shared_info; @@ -367,7 +374,7 @@ void xen_timer_resume(void) } static const struct pv_time_ops xen_time_ops __initconst = { - .sched_clock = xen_clocksource_read, + .sched_clock = xen_sched_clock, .steal_clock = xen_steal_clock, }; @@ -505,6 +512,7 @@ static void __init xen_time_init(void) void __ref xen_init_time_ops(void) { + xen_sched_clock_offset = xen_clocksource_read(); pv_time_ops = xen_time_ops; x86_init.timers.timer_init = xen_time_init; @@ -547,6 +555,7 @@ void __init xen_hvm_init_time_ops(void) return; } + xen_sched_clock_offset = xen_clocksource_read(); pv_time_ops = xen_time_ops; x86_init.timers.setup_percpu_clockev = xen_time_init; x86_cpuinit.setup_percpu_clockev = xen_hvm_setup_cpu_clockevents;
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Juergen Gross <jgross@suse.com> commit 867cefb4cb1012f42cada1c7d1f35ac8dd276071 upstream. Commit f94c8d11699759 ("sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface") broke Xen guest time handling across migration: [ 187.249951] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 187.251137] OOM killer disabled. [ 187.251137] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 187.252299] suspending xenstore... [ 187.266987] xen:grant_table: Grant tables using version 1 layout [18446743811.706476] OOM killer enabled. [18446743811.706478] Restarting tasks ... done. [18446743811.720505] Setting capacity to 16777216 Fix that by setting xen_sched_clock_offset at resume time to ensure a monotonic clock value. [boris: replaced pr_info() with pr_info_once() in xen_callback_vector() to avoid printing with incorrect timestamp during resume (as we haven't re-adjusted the clock yet)] Fixes: f94c8d11699759 ("sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface") Cc: <stable@vger.kernel.org> # 4.11 Reported-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/x86/xen/time.c | 12 +++++++++--- drivers/xen/events/events_base.c | 2 +- 2 files changed, 10 insertions(+), 4 deletions(-) --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -361,8 +361,6 @@ void xen_timer_resume(void) { int cpu; - pvclock_resume(); - if (xen_clockevent != &xen_vcpuop_clockevent) return; @@ -379,12 +377,15 @@ static const struct pv_time_ops xen_time }; static struct pvclock_vsyscall_time_info *xen_clock __read_mostly; +static u64 xen_clock_value_saved; void xen_save_time_memory_area(void) { struct vcpu_register_time_memory_area t; int ret; + xen_clock_value_saved = xen_clocksource_read() - xen_sched_clock_offset; + if (!xen_clock) return; @@ -404,7 +405,7 @@ void xen_restore_time_memory_area(void) int ret; if (!xen_clock) - return; + goto out; t.addr.v = &xen_clock->pvti; @@ -421,6 +422,11 @@ void xen_restore_time_memory_area(void) if (ret != 0) pr_notice("Cannot restore secondary vcpu_time_info (err %d)", ret); + +out: + /* Need pvclock_resume() before using xen_clocksource_read(). */ + pvclock_resume(); + xen_sched_clock_offset = xen_clocksource_read() - xen_clock_value_saved; } static void xen_setup_vsyscall_time_info(void) --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -1650,7 +1650,7 @@ void xen_callback_vector(void) xen_have_vector_callback = 0; return; } - pr_info("Xen HVM callback vector for event delivery is enabled\n"); + pr_info_once("Xen HVM callback vector for event delivery is enabled\n"); alloc_intr_gate(HYPERVISOR_CALLBACK_VECTOR, xen_hvm_callback_vector); }
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Pan Bian <bianpan2016@163.com> commit 0ea295dd853e0879a9a30ab61f923c26be35b902 upstream. The function truncate_node frees the page with f2fs_put_page. However, the page index is read after that. So, the patch reads the index before freeing the page. Fixes: bf39c00a9a7f ("f2fs: drop obsolete node page when it is truncated") Cc: <stable@vger.kernel.org> Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- fs/f2fs/node.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/fs/f2fs/node.c +++ b/fs/f2fs/node.c @@ -694,6 +694,7 @@ static void truncate_node(struct dnode_o { struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode); struct node_info ni; + pgoff_t index; get_node_info(sbi, dn->nid, &ni); f2fs_bug_on(sbi, ni.blk_addr == NULL_ADDR); @@ -712,10 +713,11 @@ static void truncate_node(struct dnode_o clear_node_page_dirty(dn->node_page); set_sbi_flag(sbi, SBI_IS_DIRTY); + index = dn->node_page->index; f2fs_put_page(dn->node_page, 1); invalidate_mapping_pages(NODE_MAPPING(sbi), - dn->node_page->index, dn->node_page->index); + index, index); dn->node_page = NULL; trace_f2fs_truncate_node(dn->inode, dn->nid, ni.blk_addr);
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Jeff Mahoney <jeffm@suse.com> commit 5c06147128fbbdf7a84232c5f0d808f53153defe upstream. When we fail to start a transaction in btrfs_dev_replace_start, we leave dev_replace->replace_start set to STARTED but clear ->srcdev and ->tgtdev. Later, that can result in an Oops in btrfs_dev_replace_progress when having state set to STARTED or SUSPENDED implies that ->srcdev is valid. Also fix error handling when the state is already STARTED or SUSPENDED while starting. That, too, will clear ->srcdev and ->tgtdev even though it doesn't own them. This should be an impossible case to hit since we should be protected by the BTRFS_FS_EXCL_OP bit being set. Let's add an ASSERT there while we're at it. Fixes: e93c89c1aaaaa (Btrfs: add new sources for device replace code) CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- fs/btrfs/dev-replace.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- a/fs/btrfs/dev-replace.c +++ b/fs/btrfs/dev-replace.c @@ -351,6 +351,7 @@ int btrfs_dev_replace_start(struct btrfs break; case BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED: case BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED: + ASSERT(0); ret = BTRFS_IOCTL_DEV_REPLACE_RESULT_ALREADY_STARTED; goto leave; } @@ -395,6 +396,10 @@ int btrfs_dev_replace_start(struct btrfs if (IS_ERR(trans)) { ret = PTR_ERR(trans); btrfs_dev_replace_lock(dev_replace, 1); + dev_replace->replace_state = + BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED; + dev_replace->srcdev = NULL; + dev_replace->tgtdev = NULL; goto leave; } @@ -416,8 +421,6 @@ int btrfs_dev_replace_start(struct btrfs return ret; leave: - dev_replace->srcdev = NULL; - dev_replace->tgtdev = NULL; btrfs_dev_replace_unlock(dev_replace, 1); btrfs_destroy_dev_replace_tgtdev(fs_info, tgt_device); return ret;
4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Anand Jain <anand.jain@oracle.com> commit 0d228ece59a35a9b9e8ff0d40653234a6d90f61e upstream. At the time of forced unmount we place the running replace to BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state, so when the system comes back and expect the target device is missing. Then let the replace state continue to be in BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state instead of BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED as there isn't any matching scrub running as part of replace. Fixes: e93c89c1aaaa ("Btrfs: add new sources for device replace code") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- fs/btrfs/dev-replace.c | 2 ++ 1 file changed, 2 insertions(+) --- a/fs/btrfs/dev-replace.c +++ b/fs/btrfs/dev-replace.c @@ -804,6 +804,8 @@ int btrfs_resume_dev_replace_async(struc "cannot continue dev_replace, tgtdev is missing"); btrfs_info(fs_info, "you may cancel the operation after 'mount -o degraded'"); + dev_replace->replace_state = + BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED; btrfs_dev_replace_unlock(dev_replace, 1); return 0; }
On 1/29/19 4:35 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.97 release.
> There are 68 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jan 31 11:31:10 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.97-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On 29/01/2019 11:35, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.97 release.
> There are 68 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jan 31 11:31:10 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.97-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.14:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
14 tests: 14 pass, 0 fail
Linux version: 4.14.97-rc1-g958f665
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On Tue, 29 Jan 2019 at 17:19, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote: > > This is the start of the stable review cycle for the 4.14.97 release. > There are 68 patches in this series, all will be posted as a response > to this one. If anyone has any issues with these being applied, please > let me know. > > Responses should be made by Thu Jan 31 11:31:10 UTC 2019. > Anything received after that time might be too late. > > The whole patch series can be found in one patch at: > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.97-rc1.gz > or in the git tree and branch at: > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y > and the diffstat can be found below. > > thanks, > > greg k-h Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386. NOTE: ----- LTP upgrade to 20190115 and fanotify01, fanotify09 and readahead02 tests failed fanotify01 failed on hikey and dragonboard410c arm64 boards all kernel versions fanotify01.c:256: FAIL: got event: mask=2 (expected 20) pid=2756 fd=9 https://bugs.linaro.org/show_bug.cgi?id=4261 fanotify09 failed on arm64 devices running 4.14 version kernel fanotify09.c:202: FAIL: first group got more than 2 events (72 > 48) https://bugs.linaro.org/show_bug.cgi?id=4271 readahead02 failed on arm32 x15 device. Need to enable CONFIG_TASKSTATS and CONFIG_TASK_IO_ACCOUNTING on arm32 device Summary ------------------------------------------------------------------------ kernel: 4.14.97-rc1 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git git branch: linux-4.14.y git commit: 958f665be23ee580aed7e445d3dc4700a0d31a48 git describe: v4.14.96-69-g958f665be23e Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.96-69-g958f665be23e No regressions (compared to build v4.14.96) No fixes (compared to build v4.14.96) Ran 22094 total tests in the following environments and test suites. Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - qemu_arm - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - arm - x86_64 Test Suites ----------- * boot * install-android-platform-tools-r2600 * kselftest * libhugetlbfs * ltp-cap_bounds-tests * ltp-containers-tests * ltp-cpuhotplug-tests * ltp-cve-tests * ltp-fcntl-locktests-tests * ltp-filecaps-tests * ltp-fs-tests * ltp-fs_bind-tests * ltp-fs_perms_simple-tests * ltp-fsx-tests * ltp-hugetlb-tests * ltp-io-tests * ltp-ipc-tests * ltp-mm-tests * ltp-nptl-tests * ltp-pty-tests * ltp-sched-tests * ltp-securebits-tests * ltp-syscalls-tests * ltp-timers-tests * spectre-meltdown-checker-test * ltp-math-tests * ltp-open-posix-tests * prep-tmp-disk * kselftest-vsyscall-mode-native * kselftest-vsyscall-mode-none -- Linaro LKFT https://lkft.linaro.org
On Wed, Jan 30, 2019 at 2:55 PM Naresh Kamboju
<naresh.kamboju@linaro.org> wrote:
>
> On Tue, 29 Jan 2019 at 17:19, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 4.14.97 release.
> > There are 68 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu Jan 31 11:31:10 UTC 2019.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.97-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.
>
> NOTE:
> -----
> LTP upgrade to 20190115 and fanotify01, fanotify09 and readahead02 tests failed
>
> fanotify01 failed on hikey and dragonboard410c arm64 boards all kernel versions
> fanotify01.c:256: FAIL: got event: mask=2 (expected 20) pid=2756 fd=9
> https://bugs.linaro.org/show_bug.cgi?id=4261
>
> fanotify09 failed on arm64 devices running 4.14 version kernel
> fanotify09.c:202: FAIL: first group got more than 2 events (72 > 48)
> https://bugs.linaro.org/show_bug.cgi?id=4271
>
fanotify09 was added a new regression test case for commit
b469e7e47c8a: fanotify: fix handling of events on child sub-directory
That commit was backported to v4.19. As I wrote in "backport hint", the bug
exists in older kernels, but fix does not apply cleanly to older kernels.
Thanks,
Amir.
On Wed, Jan 30, 2019 at 08:49:34PM +0200, Amir Goldstein wrote:
> On Wed, Jan 30, 2019 at 2:55 PM Naresh Kamboju
> <naresh.kamboju@linaro.org> wrote:
> >
> > On Tue, 29 Jan 2019 at 17:19, Greg Kroah-Hartman
> > <gregkh@linuxfoundation.org> wrote:
> > >
> > > This is the start of the stable review cycle for the 4.14.97 release.
> > > There are 68 patches in this series, all will be posted as a response
> > > to this one. If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Thu Jan 31 11:31:10 UTC 2019.
> > > Anything received after that time might be too late.
> > >
> > > The whole patch series can be found in one patch at:
> > > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.97-rc1.gz
> > > or in the git tree and branch at:
> > > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> > > and the diffstat can be found below.
> > >
> > > thanks,
> > >
> > > greg k-h
> >
> > Results from Linaro’s test farm.
> > No regressions on arm64, arm, x86_64, and i386.
> >
> > NOTE:
> > -----
> > LTP upgrade to 20190115 and fanotify01, fanotify09 and readahead02 tests failed
> >
> > fanotify01 failed on hikey and dragonboard410c arm64 boards all kernel versions
> > fanotify01.c:256: FAIL: got event: mask=2 (expected 20) pid=2756 fd=9
> > https://bugs.linaro.org/show_bug.cgi?id=4261
> >
> > fanotify09 failed on arm64 devices running 4.14 version kernel
> > fanotify09.c:202: FAIL: first group got more than 2 events (72 > 48)
> > https://bugs.linaro.org/show_bug.cgi?id=4271
> >
>
> fanotify09 was added a new regression test case for commit
> b469e7e47c8a: fanotify: fix handling of events on child sub-directory
>
> That commit was backported to v4.19. As I wrote in "backport hint", the bug
> exists in older kernels, but fix does not apply cleanly to older kernels.
If someone were to provide a tested backport to 4.14 and older, I'll be
glad to queue it up (hint hint hint...)
thanks,
greg k-h
On Tue, Jan 29, 2019 at 12:35:22PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.97 release.
> There are 68 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jan 31 11:31:10 UTC 2019.
> Anything received after that time might be too late.
>
For v4.14.96-69-g958f665be23e:
Build results:
total: 172 pass: 172 fail: 0
Qemu test results:
total: 328 pass: 328 fail: 0
Guenter
On Wed, Jan 30, 2019 at 12:51:12PM +0000, Jon Hunter wrote:
>
> On 29/01/2019 11:35, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.97 release.
> > There are 68 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu Jan 31 11:31:10 UTC 2019.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.97-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> All tests are passing for Tegra ...
>
> Test results for stable-v4.14:
> 8 builds: 8 pass, 0 fail
> 16 boots: 16 pass, 0 fail
> 14 tests: 14 pass, 0 fail
>
> Linux version: 4.14.97-rc1-g958f665
> Boards tested: tegra124-jetson-tk1, tegra20-ventana,
> tegra210-p2371-2180, tegra30-cardhu-a04
Thanks for testing two of these and letting me know.
greg k-h
[-- Attachment #1: Type: text/plain, Size: 695 bytes --] > > > fanotify09 failed on arm64 devices running 4.14 version kernel > > > fanotify09.c:202: FAIL: first group got more than 2 events (72 > 48) > > > https://bugs.linaro.org/show_bug.cgi?id=4271 > > > > > > > fanotify09 was added a new regression test case for commit > > b469e7e47c8a: fanotify: fix handling of events on child sub-directory > > > > That commit was backported to v4.19. As I wrote in "backport hint", the bug > > exists in older kernels, but fix does not apply cleanly to older kernels. > > If someone were to provide a tested backport to 4.14 and older, I'll be > glad to queue it up (hint hint hint...) > Attached backport applies and tested on 4.14 and 4.9 Thanks, Amir. [-- Attachment #2: stable-4.9-fanotify-fix-handling-of-events-on-child-sub-directo.patch --] [-- Type: text/x-patch, Size: 2522 bytes --] From 69f364bd1421d7e79b63e62cfd7ea6044249bcef Mon Sep 17 00:00:00 2001 From: Amir Goldstein <amir73il@gmail.com> Date: Tue, 30 Oct 2018 20:29:53 +0200 Subject: [PATCH] fanotify: fix handling of events on child sub-directory commit b469e7e47c8a075cc08bcd1e85d4365134bdcdd5 upstream. When an event is reported on a sub-directory and the parent inode has a mark mask with FS_EVENT_ON_CHILD|FS_ISDIR, the event will be sent to fsnotify() even if the event type is not in the parent mark mask (e.g. FS_OPEN). Further more, if that event happened on a mount or a filesystem with a mount mark that does have that event type in their mask, the "on child" event will be reported on the mount mark. That is not desired, because user will get a duplicate event for the same action. Note that the event reported on the victim inode is never merged with the event reported on the parent inode, because of the check in should_merge(): old_fsn->inode == new_fsn->inode. Fix this by looking for a match of an actual event type (i.e. not just FS_ISDIR) in parent's inode mark mask and by not reporting an "on child" event to group if event type is only found on mount marks. Cc: <stable@vger.kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> [amir: backport to v4.9] Signed-off-by: Amir Goldstein <amir73il@gmail.com> --- fs/notify/fsnotify.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c index a64adc2fced9..56b4f855fa9b 100644 --- a/fs/notify/fsnotify.c +++ b/fs/notify/fsnotify.c @@ -101,9 +101,9 @@ int __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask) parent = dget_parent(dentry); p_inode = parent->d_inode; - if (unlikely(!fsnotify_inode_watches_children(p_inode))) + if (unlikely(!fsnotify_inode_watches_children(p_inode))) { __fsnotify_update_child_dentry_flags(p_inode); - else if (p_inode->i_fsnotify_mask & mask) { + } else if (p_inode->i_fsnotify_mask & mask & ~FS_EVENT_ON_CHILD) { struct name_snapshot name; /* we are notifying a parent so come up with the new mask which @@ -207,6 +207,10 @@ int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, else mnt = NULL; + /* An event "on child" is not intended for a mount mark */ + if (mask & FS_EVENT_ON_CHILD) + mnt = NULL; + /* * Optimization: srcu_read_lock() has a memory barrier which can * be expensive. It protects walking the *_fsnotify_marks lists. -- 2.7.4
On Mon, Feb 04, 2019 at 12:12:39PM +0200, Amir Goldstein wrote:
> > > > fanotify09 failed on arm64 devices running 4.14 version kernel
> > > > fanotify09.c:202: FAIL: first group got more than 2 events (72 > 48)
> > > > https://bugs.linaro.org/show_bug.cgi?id=4271
> > > >
> > >
> > > fanotify09 was added a new regression test case for commit
> > > b469e7e47c8a: fanotify: fix handling of events on child sub-directory
> > >
> > > That commit was backported to v4.19. As I wrote in "backport hint", the bug
> > > exists in older kernels, but fix does not apply cleanly to older kernels.
> >
> > If someone were to provide a tested backport to 4.14 and older, I'll be
> > glad to queue it up (hint hint hint...)
> >
>
> Attached backport applies and tested on 4.14 and 4.9
Nice, thanks for this! Now queued up.
greg k-h