linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lyude Paul <lyude@redhat.com>
To: intel-gfx@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>,
	Todd Previte <tprevite@gmail.com>,
	Dave Airlie <airlied@redhat.com>,
	Jani Nikula <jani.nikula@linux.intel.com>,
	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	Imre Deak <imre.deak@intel.com>,
	stable@vger.kernel.org, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/3] drm/i915: Block fbdev HPD processing during suspend
Date: Tue, 29 Jan 2019 14:09:59 -0500	[thread overview]
Message-ID: <20190129191001.442-2-lyude@redhat.com> (raw)
In-Reply-To: <20190129191001.442-1-lyude@redhat.com>

When resuming, we check whether or not any previously connected
MST topologies are still present and if so, attempt to resume them. If
this fails, we disable said MST topologies and fire off a hotplug event
so that userspace knows to reprobe.

However, sending a hotplug event involves calling
drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a
connector reprobe in the caller's thread - something we can't do at the
point in which i915 calls drm_dp_mst_topology_mgr_resume() since
hotplugging hasn't been fully initialized yet.

This currently causes some rather subtle but fatal issues. For example,
on my T480s the laptop dock connected to it usually disappears during a
suspend cycle, and comes back up a short while after the system has been
resumed. This guarantees pretty much every suspend and resume cycle,
drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn,
a connector hotplug will occur. Now it's Rute Goldberg time: when the
connector hotplug occurs, i915 reprobes /all/ of the connectors,
including eDP. However, eDP probing requires that we power on the panel
VDD which in turn, grabs a wakeref to the appropriate power domain on
the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where
things start breaking, since this all happens before
intel_power_domains_enable() is called we end up leaking the wakeref
that was acquired and never releasing it later. Come next suspend/resume
cycle, this causes us to fail to shut down the GPU properly, which
causes it not to resume properly and die a horrible complicated death.

(as a note: this only happens when there's both an eDP panel and MST
topology connected which is removed mid-suspend. One or the other seems
to always be OK).

We could try to fix the VDD wakeref leak, but this doesn't seem like
it's worth it at all since we aren't able to handle hotplug detection
while resuming anyway. So, let's go with a more robust solution inspired
by nouveau: block fbdev from handling hotplug events until we resume
fbdev. This allows us to still send sysfs hotplug events to be handled
later by user space while we're resuming, while also preventing us from
actually processing any hotplug events we receive until it's safe.

This fixes the wakeref leak observed on the T480s and as such, also
fixes suspend/resume with MST topologies connected on this machine.

Changes since v2:
* Don't call drm_fb_helper_hotplug_event() under lock, do it after lock
  (Chris Wilson)
* Don't call drm_fb_helper_hotplug_event() in
  intel_fbdev_output_poll_changed() under lock (Chris Wilson)
* Always set ifbdev->hpd_waiting (Chris Wilson)

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 0e32b39ceed6 ("drm/i915: add DP 1.2 MST support (v0.7)")
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.17+
---
 drivers/gpu/drm/i915/intel_drv.h   | 10 +++++++++
 drivers/gpu/drm/i915/intel_fbdev.c | 33 +++++++++++++++++++++++++++++-
 2 files changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 90ba5436370e..9ec3d00fbd19 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -213,6 +213,16 @@ struct intel_fbdev {
 	unsigned long vma_flags;
 	async_cookie_t cookie;
 	int preferred_bpp;
+
+	/* Whether or not fbdev hpd processing is temporarily suspended */
+	bool hpd_suspended : 1;
+	/* Set when a hotplug was received while HPD processing was
+	 * suspended
+	 */
+	bool hpd_waiting : 1;
+
+	/* Protects hpd_suspended */
+	struct mutex hpd_lock;
 };
 
 struct intel_encoder {
diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index 8cf3efe88f02..376ffe842e26 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -681,6 +681,7 @@ int intel_fbdev_init(struct drm_device *dev)
 	if (ifbdev == NULL)
 		return -ENOMEM;
 
+	mutex_init(&ifbdev->hpd_lock);
 	drm_fb_helper_prepare(dev, &ifbdev->helper, &intel_fb_helper_funcs);
 
 	if (!intel_fbdev_init_bios(dev, ifbdev))
@@ -754,6 +755,26 @@ void intel_fbdev_fini(struct drm_i915_private *dev_priv)
 	intel_fbdev_destroy(ifbdev);
 }
 
+/* Suspends/resumes fbdev processing of incoming HPD events. When resuming HPD
+ * processing, fbdev will perform a full connector reprobe if a hotplug event
+ * was received while HPD was suspended.
+ */
+static void intel_fbdev_hpd_set_suspend(struct intel_fbdev *ifbdev, int state)
+{
+	bool send_hpd = false;
+
+	mutex_lock(&ifbdev->hpd_lock);
+	ifbdev->hpd_suspended = state == FBINFO_STATE_SUSPENDED;
+	send_hpd = !ifbdev->hpd_suspended && ifbdev->hpd_waiting;
+	ifbdev->hpd_waiting = false;
+	mutex_unlock(&ifbdev->hpd_lock);
+
+	if (send_hpd) {
+		DRM_DEBUG_KMS("Handling delayed fbcon HPD event\n");
+		drm_fb_helper_hotplug_event(&ifbdev->helper);
+	}
+}
+
 void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous)
 {
 	struct drm_i915_private *dev_priv = to_i915(dev);
@@ -775,6 +796,7 @@ void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous
 		 */
 		if (state != FBINFO_STATE_RUNNING)
 			flush_work(&dev_priv->fbdev_suspend_work);
+
 		console_lock();
 	} else {
 		/*
@@ -802,17 +824,26 @@ void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous
 
 	drm_fb_helper_set_suspend(&ifbdev->helper, state);
 	console_unlock();
+
+	intel_fbdev_hpd_set_suspend(ifbdev, state);
 }
 
 void intel_fbdev_output_poll_changed(struct drm_device *dev)
 {
 	struct intel_fbdev *ifbdev = to_i915(dev)->fbdev;
+	bool send_hpd;
 
 	if (!ifbdev)
 		return;
 
 	intel_fbdev_sync(ifbdev);
-	if (ifbdev->vma || ifbdev->helper.deferred_setup)
+
+	mutex_lock(&ifbdev->hpd_lock);
+	send_hpd = !ifbdev->hpd_suspended;
+	ifbdev->hpd_waiting = true;
+	mutex_unlock(&ifbdev->hpd_lock);
+
+	if (send_hpd && (ifbdev->vma || ifbdev->helper.deferred_setup))
 		drm_fb_helper_hotplug_event(&ifbdev->helper);
 }
 
-- 
2.20.1


  reply	other threads:[~2019-01-29 19:10 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-29 19:09 [PATCH v3 0/3] drm/i915: MST and wakeref leak fixes Lyude Paul
2019-01-29 19:09 ` Lyude Paul [this message]
2019-01-29 19:20   ` [PATCH v3 1/3] drm/i915: Block fbdev HPD processing during suspend Chris Wilson
2019-01-29 19:10 ` [PATCH v3 2/3] drm/i915: Don't send MST hotplugs during resume Lyude Paul
2019-02-06 19:32   ` Ville Syrjälä
2019-01-29 19:10 ` [PATCH v3 3/3] drm/i915: Don't send hotplug in intel_dp_check_mst_status() Lyude Paul
2019-02-06 19:33   ` [Intel-gfx] " Ville Syrjälä

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190129191001.442-2-lyude@redhat.com \
    --to=lyude@redhat.com \
    --cc=airlied@linux.ie \
    --cc=airlied@redhat.com \
    --cc=chris@chris-wilson.co.uk \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=joonas.lahtinen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rodrigo.vivi@intel.com \
    --cc=stable@vger.kernel.org \
    --cc=tprevite@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).