LKML Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] namespace: fix namespace.pl script to support relative paths
@ 2019-01-29 20:43 Jacob Keller
  2019-09-27 23:12 ` Randy Dunlap
  0 siblings, 1 reply; 12+ messages in thread
From: Jacob Keller @ 2019-01-29 20:43 UTC (permalink / raw)
  To: linux-kernel; +Cc: Intel Wired LAN, Jacob Keller

The namespace.pl script does not work properly if objtree is not set to
an absolute path. The do_nm function is run from within the find
function, which changes directories.

Because of this, appending objtree, $File::Find::dir, and $source, will
return a path which is not valid from the current directory.

This used to work when objtree was set to an absolute path when using
"make namespacecheck". It appears to have not worked when calling
./scripts/namespace.pl directly.

This behavior was changed in 7e1c04779efd ("kbuild: Use relative path
for $(objtree)", 2014-05-14)

Rather than fixing the Makefile to set objtree to an absolute path, just
fix namespace.pl to work when srctree and objtree are relative. Also fix
the script to use an absolute path for these by default.

Use the File::Spec module for this purpose. It's been part of perl
5 since 5.005.

The curdir() function is used to get the current directory when the
objtree and srctree aren't set in the environment.

rel2abs() is used to convert possibly relative objtree and srctree
environment variables to absolute paths.

Finally, the catfile() function is used instead of string appending
paths together, since this is more robust when joining paths together.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
---
 scripts/namespace.pl | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/scripts/namespace.pl b/scripts/namespace.pl
index 6135574a6f39..1da7bca201a4 100755
--- a/scripts/namespace.pl
+++ b/scripts/namespace.pl
@@ -65,13 +65,14 @@
 use warnings;
 use strict;
 use File::Find;
+use File::Spec;
 
 my $nm = ($ENV{'NM'} || "nm") . " -p";
 my $objdump = ($ENV{'OBJDUMP'} || "objdump") . " -s -j .comment";
-my $srctree = "";
-my $objtree = "";
-$srctree = "$ENV{'srctree'}/" if (exists($ENV{'srctree'}));
-$objtree = "$ENV{'objtree'}/" if (exists($ENV{'objtree'}));
+my $srctree = File::Spec->curdir();
+my $objtree = File::Spec->curdir();
+$srctree = File::Spec->rel2abs($ENV{'srctree'}) if (exists($ENV{'srctree'}));
+$objtree = File::Spec->rel2abs($ENV{'objtree'}) if (exists($ENV{'objtree'}));
 
 if ($#ARGV != -1) {
 	print STDERR "usage: $0 takes no parameters\n";
@@ -231,9 +232,9 @@ sub do_nm
 	}
 	($source = $basename) =~ s/\.o$//;
 	if (-e "$source.c" || -e "$source.S") {
-		$source = "$objtree$File::Find::dir/$source";
+		$source = File::Spec->catfile($objtree, $File::Find::dir, $source)
 	} else {
-		$source = "$srctree$File::Find::dir/$source";
+		$source = File::Spec->catfile($srctree, $File::Find::dir, $source)
 	}
 	if (! -e "$source.c" && ! -e "$source.S") {
 		# No obvious source, exclude the object if it is conglomerate
-- 
2.18.0.219.gaf81d287a9da


^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-29 20:43 [PATCH] namespace: fix namespace.pl script to support relative paths Jacob Keller
2019-09-27 23:12 ` Randy Dunlap
2019-09-27 23:23   ` Keller, Jacob E
2019-09-27 23:30   ` Keller, Jacob E
2019-09-29  0:20     ` Masahiro Yamada
2019-09-30 19:46       ` Keller, Jacob E
2019-10-23  5:21         ` Masahiro Yamada
2019-10-23 21:34           ` Keller, Jacob E
2019-10-24  1:21             ` Masahiro Yamada
2019-10-25 17:45               ` Keller, Jacob E
2019-10-25 19:30                 ` Randy Dunlap
2019-10-25 20:20                   ` Keller, Jacob E

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git
	git clone --mirror https://lore.kernel.org/lkml/10 lkml/git/10.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git