From: Joseph Lo <josephl@nvidia.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>
Cc: <linux-tegra@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Joseph Lo <josephl@nvidia.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
Rob Herring <robh@kernel.org>
Subject: [PATCH V4 1/7] dt-bindings: timer: add Tegra210 timer
Date: Thu, 31 Jan 2019 17:24:04 +0800 [thread overview]
Message-ID: <20190131092410.28222-2-josephl@nvidia.com> (raw)
In-Reply-To: <20190131092410.28222-1-josephl@nvidia.com>
The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit
timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived
from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock
(TMR10-TMR13). Each TMR can be programmed to generate one-shot periodic,
or watchdog interrupts.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
V4:
* no change
v3:
* no change
v2:
* list all the interrupts that are supported by tegra210 timers block
* add RB tag from Rob.
---
.../bindings/timer/nvidia,tegra210-timer.txt | 36 +++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
new file mode 100644
index 000000000000..032cda96fe0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
@@ -0,0 +1,36 @@
+NVIDIA Tegra210 timer
+
+The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit
+timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived
+from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock
+(TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic,
+or watchdog interrupts.
+
+Required properties:
+- compatible : "nvidia,tegra210-timer".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 14 interrupts; one per each timer channels 0 through
+ 13.
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+
+timer@60005000 {
+ compatible = "nvidia,tegra210-timer";
+ reg = <0x0 0x60005000 0x0 0x400>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_TIMER>;
+ clock-names = "timer";
+};
--
2.20.1
next parent reply other threads:[~2019-01-31 9:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190131092410.28222-1-josephl@nvidia.com>
2019-01-31 9:24 ` Joseph Lo [this message]
2019-01-31 9:24 ` [PATCH V4 2/7] clocksource: tegra: add Tegra210 timer support Joseph Lo
2019-01-31 11:23 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190131092410.28222-2-josephl@nvidia.com \
--to=josephl@nvidia.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=robh@kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).