On Wed, Jan 30, 2019 at 10:16:24PM -0800, Sowjanya Komatineni wrote:
> Bus clear feature of tegra i2c controller helps to recover from
> bus hang when i2c master loses the bus arbitration due to the
> slave device holding SDA LOW continuously for some unknown reasons.
> 
> Per I2C specification, the device that held the bus LOW should
> release it within 9 clock pulses.
> 
> During bus clear operation, Tegra I2C controller sends 9 clock
> pulses and terminates the transaction with STOP condition.
> Upon successful bus clear operation, bus goes to idle state and
> driver retries the transaction.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  [V5/V6/V7/V8]: Same as V4
>  [V4]: Added I2C Bus Clear support patch to this version of series.
> 
>  drivers/i2c/busses/i2c-tegra.c | 71 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 71 insertions(+)

See my comments on v7, with that:

Acked-by: Thierry Reding <treding@nvidia.com>