linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Rothwell <sfr@canb.auug.org.au>
To: "Michael S. Tsirkin" <mst@redhat.com>,
	Bjorn Helgaas <bhelgaas@google.com>
Cc: Linux Next Mailing List <linux-next@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: linux-next: manual merge of the vhost tree with the pci tree
Date: Thu, 31 Jan 2019 13:40:33 +1100	[thread overview]
Message-ID: <20190131134033.1ed0021d@canb.auug.org.au> (raw)

[-- Attachment #1: Type: text/plain, Size: 2902 bytes --]

Hi all,

Today's linux-next merge of the vhost tree got a conflict in:

  drivers/pci/setup-bus.c

between commit:

  51c48b310183 ("PCI: Probe bridge window attributes once at enumeration-time")

from the pci tree and commit:

  955156f34e7d ("PCI: avoid bridge feature re-probing on hotplug")

from the vhost tree.

I fixed it up (hopefully - see below) and can carry the fix as
necessary. This is now fixed as far as linux-next is concerned, but any
non trivial conflicts should be mentioned to your upstream maintainer
when your tree is submitted for merging.  You may also want to consider
cooperating with the maintainer of the conflicting tree to minimise any
particularly complex conflicts.

-- 
Cheers,
Stephen Rothwell

diff --cc drivers/pci/setup-bus.c
index 1941bb0a6c13,d5c25d465d97..000000000000
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@@ -735,17 -735,50 +735,26 @@@ int pci_claim_bridge_resource(struct pc
     base/limit registers must be read-only and read as 0. */
  static void pci_bridge_check_ranges(struct pci_bus *bus)
  {
 -	u16 io;
 -	u32 pmem;
  	struct pci_dev *bridge = bus->self;
 -	struct resource *b_res;
 -
 -	b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
 +	struct resource *b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
  
+ 	/*
+ 	 * Don't re-check after this was called once already:
+ 	 * important since bridge might be in use.
+ 	 * Note: this is only reliable because as per spec all PCI to PCI
+ 	 * bridges support memory unconditionally so IORESOURCE_MEM is set.
+ 	 */
+ 	if (b_res[1].flags & IORESOURCE_MEM)
+ 		return;
+ 
  	b_res[1].flags |= IORESOURCE_MEM;
  
 -	pci_read_config_word(bridge, PCI_IO_BASE, &io);
 -	if (!io) {
 -		pci_write_config_word(bridge, PCI_IO_BASE, 0xe0f0);
 -		pci_read_config_word(bridge, PCI_IO_BASE, &io);
 -		pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
 -	}
 -	if (io)
 +	if (bridge->io_window)
  		b_res[0].flags |= IORESOURCE_IO;
  
 -	/*  DECchip 21050 pass 2 errata: the bridge may miss an address
 -	    disconnect boundary by one PCI data phase.
 -	    Workaround: do not use prefetching on this device. */
 -	if (bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == 0x0001)
 -		return;
 -
 -	pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
 -	if (!pmem) {
 -		pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE,
 -					       0xffe0fff0);
 -		pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
 -		pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
 -	}
 -	if (pmem) {
 +	if (bridge->pref_window) {
  		b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
 -		if ((pmem & PCI_PREF_RANGE_TYPE_MASK) ==
 -		    PCI_PREF_RANGE_TYPE_64) {
 +		if (bridge->pref_64_window) {
  			b_res[2].flags |= IORESOURCE_MEM_64;
  			b_res[2].flags |= PCI_PREF_RANGE_TYPE_64;
  		}

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

             reply	other threads:[~2019-01-31  2:40 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-31  2:40 Stephen Rothwell [this message]
2019-01-31 14:15 ` linux-next: manual merge of the vhost tree with the pci tree Bjorn Helgaas
2019-01-31 14:42   ` Michael S. Tsirkin
  -- strict thread matches above, loose matches on Subject: below --
2019-04-15  6:07 Stephen Rothwell
2015-04-13  9:48 Stephen Rothwell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190131134033.1ed0021d@canb.auug.org.au \
    --to=sfr@canb.auug.org.au \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-next@vger.kernel.org \
    --cc=mst@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).