LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Arun Kumar Neelakantam <aneela@codeaurora.org>,
	Sibi Sankar <sibis@codeaurora.org>,
	Doug Anderson <dianders@chromium.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v6 1/8] arm64: dts: qcom: sdm845: Update reserved memory map
Date: Tue,  5 Feb 2019 21:13:28 -0800
Message-ID: <20190206051335.23799-2-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20190206051335.23799-1-bjorn.andersson@linaro.org>

Update existing and add missing regions to the reserved memory map, as
described in version 10.

Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v5:
- Replaced a few 0x0 with 0
- Corrected size of tz_mem

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 74 +++++++++++++++++++++++++---
 1 file changed, 67 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index ade2f385507c..16a060063882 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -72,29 +72,69 @@
 		#size-cells = <2>;
 		ranges;
 
-		memory@85fc0000 {
+		hyp_mem: memory@85700000 {
+			reg = <0 0x85700000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: memory@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		aop_mem: memory@85fc0000 {
 			reg = <0 0x85fc0000 0 0x20000>;
 			no-map;
 		};
 
-		memory@85fe0000 {
+		aop_cmd_db_mem: memory@85fe0000 {
 			compatible = "qcom,cmd-db";
-			reg = <0x0 0x85fe0000 0x0 0x20000>;
+			reg = <0x0 0x85fe0000 0 0x20000>;
 			no-map;
 		};
 
 		smem_mem: memory@86000000 {
-			reg = <0x0 0x86000000 0x0 0x200000>;
+			reg = <0x0 0x86000000 0 0x200000>;
 			no-map;
 		};
 
-		memory@86200000 {
+		tz_mem: memory@86200000 {
 			reg = <0 0x86200000 0 0x2d00000>;
 			no-map;
 		};
 
-		wlan_msa_mem: memory@96700000 {
-			reg = <0 0x96700000 0 0x100000>;
+		qseecom_mem: memory@8ab00000 {
+			reg = <0 0x8ab00000 0 0x1400000>;
+			no-map;
+		};
+
+		camera_mem: memory@8bf00000 {
+			reg = <0 0x8bf00000 0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8c400000 {
+			reg = <0 0x8c400000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@8c410000 {
+			reg = <0 0x8c410000 0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@8c415000 {
+			reg = <0 0x8c415000 0 0x2000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8c500000 {
+			reg = <0 0x8c500000 0 0x1a00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@8df00000 {
+			reg = <0 0x8df00000 0 0x100000>;
 			no-map;
 		};
 
@@ -103,10 +143,30 @@
 			no-map;
 		};
 
+		venus_mem: memory@95800000 {
+			reg = <0 0x95800000 0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@95d00000 {
+			reg = <0 0x95d00000 0 0x800000>;
+			no-map;
+		};
+
 		mba_region: memory@96500000 {
 			reg = <0 0x96500000 0 0x200000>;
 			no-map;
 		};
+
+		slpi_mem: memory@96700000 {
+			reg = <0 0x96700000 0 0x1400000>;
+			no-map;
+		};
+
+		spss_mem: memory@97b00000 {
+			reg = <0 0x97b00000 0 0x100000>;
+			no-map;
+		};
 	};
 
 	cpus {
-- 
2.18.0


  reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-06  5:13 [PATCH v6 00/8] Qualcomm AOSS QMP driver and modem dts Bjorn Andersson
2019-02-06  5:13 ` Bjorn Andersson [this message]
2019-02-06  5:13 ` [PATCH v6 2/8] arm64: dts: qcom: sdm845: Define rmtfs memory Bjorn Andersson
2019-02-06  5:13 ` [PATCH v6 3/8] arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes Bjorn Andersson
2019-02-06  5:13 ` [PATCH v6 4/8] dt-bindings: soc: qcom: Add AOSS QMP binding Bjorn Andersson
2019-02-06  5:13 ` [PATCH v6 5/8] soc: qcom: Add AOSS QMP communication driver Bjorn Andersson
2019-02-11 22:30   ` Doug Anderson
2019-02-06  5:13 ` [PATCH v6 6/8] soc: qcom: Add AOSS QMP genpd provider Bjorn Andersson
2019-02-11 22:15   ` Doug Anderson
2019-02-06  5:13 ` [PATCH v6 7/8] arm64: dts: qcom: Add AOSS QMP node Bjorn Andersson
2019-02-06  5:13 ` [PATCH v6 8/8] arm64: dts: qcom: sdm845: Add Q6V5 MSS node Bjorn Andersson
2019-02-26 23:54   ` Doug Anderson
2019-02-27 21:03     ` Doug Anderson
2019-02-28  5:42       ` Sibi Sankar
2019-03-26  6:17       ` Vivek Gautam

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190206051335.23799-2-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=aneela@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox