linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic
@ 2019-02-09 18:46 Sasha Levin
  2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 02/42] ACPI: NUMA: Use correct type for printing addresses on i386-PAE Sasha Levin
                   ` (40 more replies)
  0 siblings, 41 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Emily Deng, Alex Deucher, Sasha Levin

From: Emily Deng <Emily.Deng@amd.com>

[ Upstream commit b8cf66182eddb22e9c7539821ed6eecdb4f86d1a ]

The pfvf exchange need be in exclusive mode. And add pfvf exchange in gpu
reset.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-By: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 8 ++++----
 drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c      | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index 30bc345d6fdf..8547fdaf8273 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -1684,8 +1684,10 @@ static int amdgpu_device_ip_init(struct amdgpu_device *adev)
 	amdgpu_xgmi_add_device(adev);
 	amdgpu_amdkfd_device_init(adev);
 
-	if (amdgpu_sriov_vf(adev))
+	if (amdgpu_sriov_vf(adev)) {
+		amdgpu_virt_init_data_exchange(adev);
 		amdgpu_virt_release_full_gpu(adev, true);
+	}
 
 	return 0;
 }
@@ -2597,9 +2599,6 @@ fence_driver_init:
 		goto failed;
 	}
 
-	if (amdgpu_sriov_vf(adev))
-		amdgpu_virt_init_data_exchange(adev);
-
 	amdgpu_fbdev_init(adev);
 
 	r = amdgpu_pm_sysfs_init(adev);
@@ -3271,6 +3270,7 @@ static int amdgpu_device_reset_sriov(struct amdgpu_device *adev,
 	r = amdgpu_ib_ring_tests(adev);
 
 error:
+	amdgpu_virt_init_data_exchange(adev);
 	amdgpu_virt_release_full_gpu(adev, true);
 	if (!r && adev->virt.gim_feature & AMDGIM_FEATURE_GIM_FLR_VRAMLOST) {
 		atomic_inc(&adev->vram_lost_counter);
diff --git a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c
index 8cbb4655896a..b11a1c17a7f2 100644
--- a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c
+++ b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c
@@ -174,7 +174,7 @@ static int xgpu_ai_send_access_requests(struct amdgpu_device *adev,
 			return r;
 		}
 		/* Retrieve checksum from mailbox2 */
-		if (req == IDH_REQ_GPU_INIT_ACCESS) {
+		if (req == IDH_REQ_GPU_INIT_ACCESS || req == IDH_REQ_GPU_RESET_ACCESS) {
 			adev->virt.fw_reserve.checksum_key =
 				RREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0,
 					mmBIF_BX_PF0_MAILBOX_MSGBUF_RCV_DW2));
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 02/42] ACPI: NUMA: Use correct type for printing addresses on i386-PAE
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
@ 2019-02-09 18:46 ` Sasha Levin
  2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 03/42] perf stat: Fix endless wait for child process Sasha Levin
                   ` (39 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Chao Fan, Rafael J . Wysocki, Sasha Levin

From: Chao Fan <fanc.fnst@cn.fujitsu.com>

[ Upstream commit b9ced18acf68dffebe6888c7ec765a2b1db7a039 ]

The addresses of NUMA nodes are not printed correctly on i386-PAE
which is misleading.

Here is a debian9-32bit with PAE in a QEMU guest having more than 4G
of memory:

qemu-system-i386 \
-hda /var/lib/libvirt/images/debian32.qcow2 \
-m 5G \
-enable-kvm \
-smp 10 \
-numa node,mem=512M,nodeid=0,cpus=0 \
-numa node,mem=512M,nodeid=1,cpus=1 \
-numa node,mem=512M,nodeid=2,cpus=2 \
-numa node,mem=512M,nodeid=3,cpus=3 \
-numa node,mem=512M,nodeid=4,cpus=4 \
-numa node,mem=512M,nodeid=5,cpus=5 \
-numa node,mem=512M,nodeid=6,cpus=6 \
-numa node,mem=512M,nodeid=7,cpus=7 \
-numa node,mem=512M,nodeid=8,cpus=8 \
-numa node,mem=512M,nodeid=9,cpus=9 \
-serial stdio

Because of the wrong value type, it prints as below:

[    0.021049] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled
[    0.021740] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled
[    0.022425] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled
[    0.023092] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled
[    0.023764] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled
[    0.024431] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled
[    0.025104] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled
[    0.025791] ACPI: SRAT Memory (0x0 length 0x20000000) in proximity domain 6 enabled
[    0.026412] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 7 enabled
[    0.027118] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 8 enabled
[    0.027802] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 9 enabled

The upper half of the start address of the NUMA domains between 6
and 9 inclusive was cut, so the printed values are incorrect.

Fix the value type, to get the correct values in the log as follows:

[    0.023698] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled
[    0.024325] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled
[    0.024981] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled
[    0.025659] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled
[    0.026317] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled
[    0.026980] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled
[    0.027635] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled
[    0.028311] ACPI: SRAT Memory (0x100000000 length 0x20000000) in proximity domain 6 enabled
[    0.028985] ACPI: SRAT Memory (0x120000000 length 0x20000000) in proximity domain 7 enabled
[    0.029667] ACPI: SRAT Memory (0x140000000 length 0x20000000) in proximity domain 8 enabled
[    0.030334] ACPI: SRAT Memory (0x160000000 length 0x20000000) in proximity domain 9 enabled

Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/numa.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index 274699463b4f..7bbbf8256a41 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -146,9 +146,9 @@ acpi_table_print_srat_entry(struct acpi_subtable_header *header)
 		{
 			struct acpi_srat_mem_affinity *p =
 			    (struct acpi_srat_mem_affinity *)header;
-			pr_debug("SRAT Memory (0x%lx length 0x%lx) in proximity domain %d %s%s%s\n",
-				 (unsigned long)p->base_address,
-				 (unsigned long)p->length,
+			pr_debug("SRAT Memory (0x%llx length 0x%llx) in proximity domain %d %s%s%s\n",
+				 (unsigned long long)p->base_address,
+				 (unsigned long long)p->length,
 				 p->proximity_domain,
 				 (p->flags & ACPI_SRAT_MEM_ENABLED) ?
 				 "enabled" : "disabled",
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 03/42] perf stat: Fix endless wait for child process
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
  2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 02/42] ACPI: NUMA: Use correct type for printing addresses on i386-PAE Sasha Levin
@ 2019-02-09 18:46 ` Sasha Levin
  2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 04/42] perf report: Fix wrong iteration count in --branch-history Sasha Levin
                   ` (38 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jin Yao, Alexander Shishkin, Andi Kleen, Kan Liang,
	Peter Zijlstra, Arnaldo Carvalho de Melo, Sasha Levin

From: Jin Yao <yao.jin@linux.intel.com>

[ Upstream commit 8a99255a50c0b4c2a449b96fd8d45fcc8d72c701 ]

We hit a 'perf stat' issue by using following script:

  #!/bin/bash

  sleep 1000 &
  exec perf stat -a -e cycles -I1000 -- sleep 5

Since "perf stat" is launched by exec, the "sleep 1000" would be the
child process of "perf stat". The wait4() call will not return because
it's waiting for the child process "sleep 1000" to end. So 'perf stat'
doesn't return even after 5s passes.

This patch lets 'perf stat' return when the specified child process ends
(in this case, the specified child process is "sleep 5").

Committer testing:

  # cat test.sh
  #!/bin/bash

  sleep 10 &
  exec perf stat -a -e cycles -I1000 -- sleep 5
  #

Before:

  # time ./test.sh
  #           time             counts unit events
       1.001113090        108,453,351      cycles
       2.002062196        142,075,435      cycles
       3.002896194        164,801,068      cycles
       4.003731666        107,062,140      cycles
       5.002068867        112,241,832      cycles

  real	0m10.066s
  user	0m0.016s
  sys	0m0.101s
  #

After:

  # time ./test.sh
  #           time             counts unit events
       1.001016096         91,412,027      cycles
       2.002014963        124,063,708      cycles
       3.002883964        125,993,929      cycles
       4.003706470        120,465,734      cycles
       5.002006778        163,560,355      cycles

  real	0m5.123s
  user	0m0.014s
  sys	0m0.105s
  #

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1546501245-4512-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-stat.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 1410d66192f7..63a3afc7f32b 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -561,7 +561,8 @@ try_again:
 					break;
 			}
 		}
-		wait4(child_pid, &status, 0, &stat_config.ru_data);
+		if (child_pid != -1)
+			wait4(child_pid, &status, 0, &stat_config.ru_data);
 
 		if (workload_exec_errno) {
 			const char *emsg = str_error_r(workload_exec_errno, msg, sizeof(msg));
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 04/42] perf report: Fix wrong iteration count in --branch-history
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
  2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 02/42] ACPI: NUMA: Use correct type for printing addresses on i386-PAE Sasha Levin
  2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 03/42] perf stat: Fix endless wait for child process Sasha Levin
@ 2019-02-09 18:46 ` Sasha Levin
  2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 05/42] perf test shell: Use a fallback to get the pathname in vfs_getname Sasha Levin
                   ` (37 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jin Yao, Alexander Shishkin, Andi Kleen, Jiri Olsa, Kan Liang,
	Peter Zijlstra, Arnaldo Carvalho de Melo, Sasha Levin

From: Jin Yao <yao.jin@linux.intel.com>

[ Upstream commit a3366db06bb656cef2e03f30f780d93059bcc594 ]

By calculating the removed loops, we can get the iteration count.

But the iteration count could be reported incorrectly, reporting
impossibly high counts.

That's because previous code uses the number of removed LBR entries for
the iteration count. That's not good. Fix this by increasing the
iteration count when a loop is detected.

When matching the chain, the iteration count would be added up, finally we need
to compute the average value when printing out.

For example,

  $ perf report --branch-history --stdio --no-children

Before:

  ---f2 +0
     |
     |--33.62%--f1 +9 (cycles:1)
     |          f1 +0
     |          main +22 (cycles:1)
     |          main +17
     |          main +38 (cycles:1)
     |          main +27
     |          f1 +26 (cycles:1)
     |          f1 +24
     |          f2 +27 (cycles:7)
     |          f2 +0
     |          f1 +19 (cycles:1)
     |          f1 +14
     |          f2 +27 (cycles:11)
     |          f2 +0
     |          f1 +9 (cycles:1 iter:2968 avg_cycles:3)
     |          f1 +0
     |          main +22 (cycles:1 iter:2968 avg_cycles:3)
     |          main +17
     |          main +38 (cycles:1 iter:2968 avg_cycles:3)

2968 is an impossible high iteration count and avg_cycles is too small.

After:

  ---f2 +0
     |
     |--33.62%--f1 +9 (cycles:1)
     |          f1 +0
     |          main +22 (cycles:1)
     |          main +17
     |          main +38 (cycles:1)
     |          main +27
     |          f1 +26 (cycles:1)
     |          f1 +24
     |          f2 +27 (cycles:7)
     |          f2 +0
     |          f1 +19 (cycles:1)
     |          f1 +14
     |          f2 +27 (cycles:11)
     |          f2 +0
     |          f1 +9 (cycles:1 iter:1 avg_cycles:23)
     |          f1 +0
     |          main +22 (cycles:1 iter:1 avg_cycles:23)
     |          main +17
     |          main +38 (cycles:1 iter:1 avg_cycles:23)

avg_cycles:23 is the average cycles of this iteration.

Fixes: c4ee06251d42 ("perf report: Calculate the average cycles of iterations")

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1546582230-17507-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/callchain.c | 32 ++++++++++++++++++++------------
 tools/perf/util/callchain.h |  1 +
 tools/perf/util/machine.c   |  2 +-
 3 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index 32ef7bdca1cf..dc2212e12184 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -766,6 +766,7 @@ static enum match_result match_chain(struct callchain_cursor_node *node,
 			cnode->cycles_count += node->branch_flags.cycles;
 			cnode->iter_count += node->nr_loop_iter;
 			cnode->iter_cycles += node->iter_cycles;
+			cnode->from_count++;
 		}
 	}
 
@@ -1345,10 +1346,10 @@ static int branch_to_str(char *bf, int bfsize,
 static int branch_from_str(char *bf, int bfsize,
 			   u64 branch_count,
 			   u64 cycles_count, u64 iter_count,
-			   u64 iter_cycles)
+			   u64 iter_cycles, u64 from_count)
 {
 	int printed = 0, i = 0;
-	u64 cycles;
+	u64 cycles, v = 0;
 
 	cycles = cycles_count / branch_count;
 	if (cycles) {
@@ -1357,14 +1358,16 @@ static int branch_from_str(char *bf, int bfsize,
 				bf + printed, bfsize - printed);
 	}
 
-	if (iter_count) {
-		printed += count_pri64_printf(i++, "iter",
-				iter_count,
-				bf + printed, bfsize - printed);
+	if (iter_count && from_count) {
+		v = iter_count / from_count;
+		if (v) {
+			printed += count_pri64_printf(i++, "iter",
+					v, bf + printed, bfsize - printed);
 
-		printed += count_pri64_printf(i++, "avg_cycles",
-				iter_cycles / iter_count,
-				bf + printed, bfsize - printed);
+			printed += count_pri64_printf(i++, "avg_cycles",
+					iter_cycles / iter_count,
+					bf + printed, bfsize - printed);
+		}
 	}
 
 	if (i)
@@ -1377,6 +1380,7 @@ static int counts_str_build(char *bf, int bfsize,
 			     u64 branch_count, u64 predicted_count,
 			     u64 abort_count, u64 cycles_count,
 			     u64 iter_count, u64 iter_cycles,
+			     u64 from_count,
 			     struct branch_type_stat *brtype_stat)
 {
 	int printed;
@@ -1389,7 +1393,8 @@ static int counts_str_build(char *bf, int bfsize,
 				predicted_count, abort_count, brtype_stat);
 	} else {
 		printed = branch_from_str(bf, bfsize, branch_count,
-				cycles_count, iter_count, iter_cycles);
+				cycles_count, iter_count, iter_cycles,
+				from_count);
 	}
 
 	if (!printed)
@@ -1402,13 +1407,14 @@ static int callchain_counts_printf(FILE *fp, char *bf, int bfsize,
 				   u64 branch_count, u64 predicted_count,
 				   u64 abort_count, u64 cycles_count,
 				   u64 iter_count, u64 iter_cycles,
+				   u64 from_count,
 				   struct branch_type_stat *brtype_stat)
 {
 	char str[256];
 
 	counts_str_build(str, sizeof(str), branch_count,
 			 predicted_count, abort_count, cycles_count,
-			 iter_count, iter_cycles, brtype_stat);
+			 iter_count, iter_cycles, from_count, brtype_stat);
 
 	if (fp)
 		return fprintf(fp, "%s", str);
@@ -1422,6 +1428,7 @@ int callchain_list_counts__printf_value(struct callchain_list *clist,
 	u64 branch_count, predicted_count;
 	u64 abort_count, cycles_count;
 	u64 iter_count, iter_cycles;
+	u64 from_count;
 
 	branch_count = clist->branch_count;
 	predicted_count = clist->predicted_count;
@@ -1429,11 +1436,12 @@ int callchain_list_counts__printf_value(struct callchain_list *clist,
 	cycles_count = clist->cycles_count;
 	iter_count = clist->iter_count;
 	iter_cycles = clist->iter_cycles;
+	from_count = clist->from_count;
 
 	return callchain_counts_printf(fp, bf, bfsize, branch_count,
 				       predicted_count, abort_count,
 				       cycles_count, iter_count, iter_cycles,
-				       &clist->brtype_stat);
+				       from_count, &clist->brtype_stat);
 }
 
 static void free_callchain_node(struct callchain_node *node)
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index 154560b1eb65..99d38ac019b8 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -118,6 +118,7 @@ struct callchain_list {
 		bool		has_children;
 	};
 	u64			branch_count;
+	u64			from_count;
 	u64			predicted_count;
 	u64			abort_count;
 	u64			cycles_count;
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 9397e3f2444d..ea228dd0a187 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -2005,7 +2005,7 @@ static void save_iterations(struct iterations *iter,
 {
 	int i;
 
-	iter->nr_loop_iter = nr;
+	iter->nr_loop_iter++;
 	iter->cycles = 0;
 
 	for (i = 0; i < nr; i++)
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 05/42] perf test shell: Use a fallback to get the pathname in vfs_getname
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (2 preceding siblings ...)
  2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 04/42] perf report: Fix wrong iteration count in --branch-history Sasha Levin
@ 2019-02-09 18:46 ` Sasha Levin
  2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 06/42] soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B} Sasha Levin
                   ` (36 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:46 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Arnaldo Carvalho de Melo, Adrian Hunter, Jiri Olsa, Namhyung Kim,
	Sasha Levin

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 03fa483821c0b4db7c2b1453d3332f397d82313f ]

Some kernels, like 4.19.13-300.fc29.x86_64 in fedora 29, fail with the
existing probe definition asking for the contents of result->name,
working when we ask for the 'filename' variable instead, so add a
fallback to that.

Now those tests are back working on fedora 29 systems with that kernel:

  # perf test vfs_getname
  65: Use vfs_getname probe to get syscall args filenames   : Ok
  66: Add vfs_getname probe to get syscall args filenames   : Ok
  67: Check open filename arg using perf trace + vfs_getname: Ok
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-klt3n0i58dfqttveti09q3fi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/tests/shell/lib/probe_vfs_getname.sh | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/perf/tests/shell/lib/probe_vfs_getname.sh b/tools/perf/tests/shell/lib/probe_vfs_getname.sh
index 1c16e56cd93e..7cb99b433888 100644
--- a/tools/perf/tests/shell/lib/probe_vfs_getname.sh
+++ b/tools/perf/tests/shell/lib/probe_vfs_getname.sh
@@ -13,7 +13,8 @@ add_probe_vfs_getname() {
 	local verbose=$1
 	if [ $had_vfs_getname -eq 1 ] ; then
 		line=$(perf probe -L getname_flags 2>&1 | egrep 'result.*=.*filename;' | sed -r 's/[[:space:]]+([[:digit:]]+)[[:space:]]+result->uptr.*/\1/')
-		perf probe $verbose "vfs_getname=getname_flags:${line} pathname=result->name:string"
+		perf probe -q       "vfs_getname=getname_flags:${line} pathname=result->name:string" || \
+		perf probe $verbose "vfs_getname=getname_flags:${line} pathname=filename:string"
 	fi
 }
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 06/42] soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B}
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (3 preceding siblings ...)
  2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 05/42] perf test shell: Use a fallback to get the pathname in vfs_getname Sasha Levin
@ 2019-02-09 18:46 ` Sasha Levin
  2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 07/42] tools uapi: fix RISC-V 64-bit support Sasha Levin
                   ` (35 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Biju Das, Simon Horman, Sasha Levin

From: Biju Das <biju.das@bp.renesas.com>

[ Upstream commit a64597227d0de5610407fcc95dc835745a53f5d0 ]

The workaround for the wrong hierarchy of the 3DG-{A,B} power domains on
RZ/G2E ES1.0 corrected the parent domains. However, the 3DG-{A,B} power
domains were still initialized and powered in the wrong order, causing
3DG operation to fail.

Fix this by changing the order in the table at runtime, when running on
an affected SoC.

This work is based on the work done by Geert for R-Car E3.

Fixes: f37d211c687588328 ("soc: renesas: rcar-sysc: Add r8a774c0 support")

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/renesas/r8a774c0-sysc.c | 23 ++++-------------------
 1 file changed, 4 insertions(+), 19 deletions(-)

diff --git a/drivers/soc/renesas/r8a774c0-sysc.c b/drivers/soc/renesas/r8a774c0-sysc.c
index e1ac4c0f6640..11050e17ea81 100644
--- a/drivers/soc/renesas/r8a774c0-sysc.c
+++ b/drivers/soc/renesas/r8a774c0-sysc.c
@@ -28,19 +28,6 @@ static struct rcar_sysc_area r8a774c0_areas[] __initdata = {
 	{ "3dg-b",	0x100, 1, R8A774C0_PD_3DG_B,	R8A774C0_PD_3DG_A },
 };
 
-static void __init rcar_sysc_fix_parent(struct rcar_sysc_area *areas,
-					unsigned int num_areas, u8 id,
-					int new_parent)
-{
-	unsigned int i;
-
-	for (i = 0; i < num_areas; i++)
-		if (areas[i].isr_bit == id) {
-			areas[i].parent = new_parent;
-			return;
-		}
-}
-
 /* Fixups for RZ/G2E ES1.0 revision */
 static const struct soc_device_attribute r8a774c0[] __initconst = {
 	{ .soc_id = "r8a774c0", .revision = "ES1.0" },
@@ -50,12 +37,10 @@ static const struct soc_device_attribute r8a774c0[] __initconst = {
 static int __init r8a774c0_sysc_init(void)
 {
 	if (soc_device_match(r8a774c0)) {
-		rcar_sysc_fix_parent(r8a774c0_areas,
-				     ARRAY_SIZE(r8a774c0_areas),
-				     R8A774C0_PD_3DG_A, R8A774C0_PD_3DG_B);
-		rcar_sysc_fix_parent(r8a774c0_areas,
-				     ARRAY_SIZE(r8a774c0_areas),
-				     R8A774C0_PD_3DG_B, R8A774C0_PD_ALWAYS_ON);
+		/* Fix incorrect 3DG hierarchy */
+		swap(r8a774c0_areas[6], r8a774c0_areas[7]);
+		r8a774c0_areas[6].parent = R8A774C0_PD_ALWAYS_ON;
+		r8a774c0_areas[7].parent = R8A774C0_PD_3DG_B;
 	}
 
 	return 0;
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 07/42] tools uapi: fix RISC-V 64-bit support
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (4 preceding siblings ...)
  2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 06/42] soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B} Sasha Levin
@ 2019-02-09 18:46 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 08/42] riscv: fix trace_sys_exit hook Sasha Levin
                   ` (34 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:46 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Aurelien Jarno, Palmer Dabbelt, Sasha Levin

From: Aurelien Jarno <aurelien@aurel32.net>

[ Upstream commit d0df00e30e4bf9bc27ddbd092ad683ff6121b360 ]

The BPF library is not built on 64-bit RISC-V, as the BPF feature is
not detected. Looking more in details, feature/test-bpf.c fails to build
with the following error:

| In file included from /tmp/linux-4.19.12/tools/include/uapi/asm/bitsperlong.h:17,
|                  from /tmp/linux-4.19.12/tools/include/uapi/asm-generic/unistd.h:2,
|                  from /usr/include/riscv64-linux-gnu/asm/unistd.h:1,
|                  from test-bpf.c:2:
| /tmp/linux-4.19.12/tools/include/asm-generic/bitsperlong.h:14:2: error: #error Inconsistent word size. Check asm/bitsperlong.h
|  #error Inconsistent word size. Check asm/bitsperlong.h
|   ^~~~~

The UAPI from the tools directory is missing RISC-V support, therefore
bitsperlong.h from asm-generic is used, defaulting to 32 bits.

Fix that by adding tools/arch/riscv/include/uapi/asm/bitsperlong.h as
a copy of arch/riscv/include/uapi/asm/bitsperlong.h and by updating
tools/include/uapi/asm/bitsperlong.h.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../arch/riscv/include/uapi/asm/bitsperlong.h | 25 +++++++++++++++++++
 tools/include/uapi/asm/bitsperlong.h          |  2 ++
 2 files changed, 27 insertions(+)
 create mode 100644 tools/arch/riscv/include/uapi/asm/bitsperlong.h

diff --git a/tools/arch/riscv/include/uapi/asm/bitsperlong.h b/tools/arch/riscv/include/uapi/asm/bitsperlong.h
new file mode 100644
index 000000000000..0b3cb52fd29d
--- /dev/null
+++ b/tools/arch/riscv/include/uapi/asm/bitsperlong.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Copyright (C) 2015 Regents of the University of California
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _UAPI_ASM_RISCV_BITSPERLONG_H
+#define _UAPI_ASM_RISCV_BITSPERLONG_H
+
+#define __BITS_PER_LONG (__SIZEOF_POINTER__ * 8)
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* _UAPI_ASM_RISCV_BITSPERLONG_H */
diff --git a/tools/include/uapi/asm/bitsperlong.h b/tools/include/uapi/asm/bitsperlong.h
index 8dd6aefdafa4..fd92ce8388fc 100644
--- a/tools/include/uapi/asm/bitsperlong.h
+++ b/tools/include/uapi/asm/bitsperlong.h
@@ -13,6 +13,8 @@
 #include "../../arch/mips/include/uapi/asm/bitsperlong.h"
 #elif defined(__ia64__)
 #include "../../arch/ia64/include/uapi/asm/bitsperlong.h"
+#elif defined(__riscv)
+#include "../../arch/riscv/include/uapi/asm/bitsperlong.h"
 #else
 #include <asm-generic/bitsperlong.h>
 #endif
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 08/42] riscv: fix trace_sys_exit hook
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (5 preceding siblings ...)
  2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 07/42] tools uapi: fix RISC-V 64-bit support Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 09/42] cpufreq: check if policy is inactive early in __cpufreq_get() Sasha Levin
                   ` (33 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: David Abdurachmanov, Palmer Dabbelt, Sasha Levin

From: David Abdurachmanov <david.abdurachmanov@gmail.com>

[ Upstream commit 775800b0f1d7303d4fd8ce0e0d9eca4ff2f338f2 ]

Fix compilation error.

Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/ptrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/ptrace.c b/arch/riscv/kernel/ptrace.c
index 60f1e02eed36..6c898d540d9d 100644
--- a/arch/riscv/kernel/ptrace.c
+++ b/arch/riscv/kernel/ptrace.c
@@ -172,6 +172,6 @@ void do_syscall_trace_exit(struct pt_regs *regs)
 
 #ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
-		trace_sys_exit(regs, regs->regs[0]);
+		trace_sys_exit(regs, regs_return_value(regs));
 #endif
 }
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 09/42] cpufreq: check if policy is inactive early in __cpufreq_get()
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (6 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 08/42] riscv: fix trace_sys_exit hook Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 10/42] csky: fixup relocation error with 807 & 860 Sasha Levin
                   ` (32 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Sudeep Holla, Rafael J . Wysocki, Sasha Levin

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit 2f66196208c98b3d1b4294edffb2c5a8197be899 ]

cpuinfo_cur_freq gets current CPU frequency as detected by hardware
while scaling_cur_freq last known CPU frequency. Some platforms may not
allow checking the CPU frequency of an offline CPU or the associated
resources may have been released via cpufreq_exit when the CPU gets
offlined, in which case the policy would have been invalidated already.
If we attempt to get current frequency from the hardware, it may result
in hang or crash.

For example on Juno, I see:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188
[0000000000000188] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 5 PID: 4202 Comm: cat Not tainted 4.20.0-08251-ga0f2c0318a15-dirty #87
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : scmi_cpufreq_get_rate+0x34/0xb0
lr : scmi_cpufreq_get_rate+0x34/0xb0
Call trace:
 scmi_cpufreq_get_rate+0x34/0xb0
 __cpufreq_get+0x34/0xc0
 show_cpuinfo_cur_freq+0x24/0x78
 show+0x40/0x60
 sysfs_kf_seq_show+0xc0/0x148
 kernfs_seq_show+0x44/0x50
 seq_read+0xd4/0x480
 kernfs_fop_read+0x15c/0x208
 __vfs_read+0x60/0x188
 vfs_read+0x94/0x150
 ksys_read+0x6c/0xd8
 __arm64_sys_read+0x24/0x30
 el0_svc_common+0x78/0x100
 el0_svc_handler+0x38/0x78
 el0_svc+0x8/0xc
---[ end trace 3d1024e58f77f6b2 ]---

So fix the issue by checking if the policy is invalid early in
__cpufreq_get before attempting to get the current frequency.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/cpufreq.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 7aa3dcad2175..df34a12a388f 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1530,17 +1530,16 @@ static unsigned int __cpufreq_get(struct cpufreq_policy *policy)
 {
 	unsigned int ret_freq = 0;
 
-	if (!cpufreq_driver->get)
+	if (unlikely(policy_is_inactive(policy)) || !cpufreq_driver->get)
 		return ret_freq;
 
 	ret_freq = cpufreq_driver->get(policy->cpu);
 
 	/*
-	 * Updating inactive policies is invalid, so avoid doing that.  Also
-	 * if fast frequency switching is used with the given policy, the check
+	 * If fast frequency switching is used with the given policy, the check
 	 * against policy->cur is pointless, so skip it in that case too.
 	 */
-	if (unlikely(policy_is_inactive(policy)) || policy->fast_switch_enabled)
+	if (policy->fast_switch_enabled)
 		return ret_freq;
 
 	if (ret_freq && policy->cur &&
@@ -1569,10 +1568,7 @@ unsigned int cpufreq_get(unsigned int cpu)
 
 	if (policy) {
 		down_read(&policy->rwsem);
-
-		if (!policy_is_inactive(policy))
-			ret_freq = __cpufreq_get(policy);
-
+		ret_freq = __cpufreq_get(policy);
 		up_read(&policy->rwsem);
 
 		cpufreq_cpu_put(policy);
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 10/42] csky: fixup relocation error with 807 & 860
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (7 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 09/42] cpufreq: check if policy is inactive early in __cpufreq_get() Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 11/42] csky: fixup CACHEV1 store instruction fast retire Sasha Levin
                   ` (31 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Guo Ren, Hui Kai, Sasha Levin

From: Guo Ren <ren_guo@c-sky.com>

[ Upstream commit f553aa1c13cbc29aaf420349a28fc33ca98440e5 ]

810 doesn't support jsri instruction and csky-as will leave
jsri + nop for relocation. Module-probe need replace them with
lrw + jsr.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Hui Kai <huikai@acoinfo.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/csky/kernel/module.c | 38 ++++++++++++++++++++++----------------
 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/arch/csky/kernel/module.c b/arch/csky/kernel/module.c
index 65abab0c7a47..0b028ee3c764 100644
--- a/arch/csky/kernel/module.c
+++ b/arch/csky/kernel/module.c
@@ -12,7 +12,7 @@
 #include <linux/spinlock.h>
 #include <asm/pgtable.h>
 
-#if defined(__CSKYABIV2__)
+#ifdef CONFIG_CPU_CK810
 #define IS_BSR32(hi16, lo16)		(((hi16) & 0xFC00) == 0xE000)
 #define IS_JSRI32(hi16, lo16)		((hi16) == 0xEAE0)
 
@@ -25,6 +25,26 @@
 	*(uint16_t *)(addr) = 0xE8Fa;		\
 	*((uint16_t *)(addr) + 1) = 0x0000;	\
 } while (0)
+
+static void jsri_2_lrw_jsr(uint32_t *location)
+{
+	uint16_t location_tmp = (uint16_t *)location;
+
+	if (IS_BSR32(*location_tmp, *(location_tmp + 1)))
+		return;
+
+	if (IS_JSRI32(*location_tmp, *(location_tmp + 1))) {
+		/* jsri 0x...  --> lrw r26, 0x... */
+		CHANGE_JSRI_TO_LRW(location);
+		/* lsli r0, r0 --> jsr r26 */
+		SET_JSR32_R26(location + 1);
+	}
+}
+#else
+static void inline jsri_2_lrw_jsr(uint32_t *location)
+{
+	return;
+}
 #endif
 
 int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
@@ -35,9 +55,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 	Elf32_Sym	*sym;
 	uint32_t	*location;
 	short		*temp;
-#if defined(__CSKYABIV2__)
-	uint16_t	*location_tmp;
-#endif
 
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
 		/* This is where to make the change */
@@ -59,18 +76,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 		case R_CSKY_PCRELJSR_IMM11BY2:
 			break;
 		case R_CSKY_PCRELJSR_IMM26BY2:
-#if defined(__CSKYABIV2__)
-			location_tmp = (uint16_t *)location;
-			if (IS_BSR32(*location_tmp, *(location_tmp + 1)))
-				break;
-
-			if (IS_JSRI32(*location_tmp, *(location_tmp + 1))) {
-				/* jsri 0x...  --> lrw r26, 0x... */
-				CHANGE_JSRI_TO_LRW(location);
-				/* lsli r0, r0 --> jsr r26 */
-				SET_JSR32_R26(location + 1);
-			}
-#endif
+			jsri_2_lrw_jsr(location);
 			break;
 		case R_CSKY_ADDR_HI16:
 			temp = ((short  *)location) + 1;
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 11/42] csky: fixup CACHEV1 store instruction fast retire
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (8 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 10/42] csky: fixup relocation error with 807 & 860 Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 12/42] csky: fixup compile error with pte_alloc Sasha Levin
                   ` (30 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Guo Ren, Lu Baoquan, Sasha Levin

From: Guo Ren <ren_guo@c-sky.com>

[ Upstream commit 96354ad79e2e59f9d620669c8e1ac2452440c260 ]

For I/O access, 810/807 store instruction fast retire will cause wrong
primitive. For example:

	stw (clear interrupt source)
	stw (unmask interrupt controller)
	enable interrupt

stw is fast retire instruction. When PC is run at enable interrupt
stage, the clear interrupt source hasn't finished. It will cause another
wrong irq-enter.

So use mb() to prevent above.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Lu Baoquan <lu.baoquan@intellif.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/csky/include/asm/io.h | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/csky/include/asm/io.h b/arch/csky/include/asm/io.h
index ecae6b358f95..c1dfa9c10e36 100644
--- a/arch/csky/include/asm/io.h
+++ b/arch/csky/include/asm/io.h
@@ -15,6 +15,31 @@ extern void iounmap(void *addr);
 extern int remap_area_pages(unsigned long address, phys_addr_t phys_addr,
 		size_t size, unsigned long flags);
 
+/*
+ * I/O memory access primitives. Reads are ordered relative to any
+ * following Normal memory access. Writes are ordered relative to any prior
+ * Normal memory access.
+ *
+ * For CACHEV1 (807, 810), store instruction could fast retire, so we need
+ * another mb() to prevent st fast retire.
+ *
+ * For CACHEV2 (860), store instruction with PAGE_ATTR_NO_BUFFERABLE won't
+ * fast retire.
+ */
+#define readb(c)		({ u8  __v = readb_relaxed(c); rmb(); __v; })
+#define readw(c)		({ u16 __v = readw_relaxed(c); rmb(); __v; })
+#define readl(c)		({ u32 __v = readl_relaxed(c); rmb(); __v; })
+
+#ifdef CONFIG_CPU_HAS_CACHEV2
+#define writeb(v,c)		({ wmb(); writeb_relaxed((v),(c)); })
+#define writew(v,c)		({ wmb(); writew_relaxed((v),(c)); })
+#define writel(v,c)		({ wmb(); writel_relaxed((v),(c)); })
+#else
+#define writeb(v,c)		({ wmb(); writeb_relaxed((v),(c)); mb(); })
+#define writew(v,c)		({ wmb(); writew_relaxed((v),(c)); mb(); })
+#define writel(v,c)		({ wmb(); writel_relaxed((v),(c)); mb(); })
+#endif
+
 #define ioremap_nocache(phy, sz)	ioremap(phy, sz)
 #define ioremap_wc ioremap_nocache
 #define ioremap_wt ioremap_nocache
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 12/42] csky: fixup compile error with pte_alloc
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (9 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 11/42] csky: fixup CACHEV1 store instruction fast retire Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 13/42] irqchip/csky: fixup handle_irq_perbit break irq Sasha Levin
                   ` (29 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Guo Ren, Joel Fernandes, Guenter Roeck, Arnd Bergmann,
	Linus Torvalds, Sasha Levin

From: Guo Ren <ren_guo@c-sky.com>

[ Upstream commit 2a60aa14a9a0333b3eef58150bc1ef654f7321ef ]

Commit: 4cf58924951e remove the address argument of pte_alloc without
modify csky related code. linux-5.0-rc1 compile failed with csky.

Remove the unnecessary address testing in pte_alloc().

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/csky/include/asm/pgalloc.h | 43 ++++++++++++++-------------------
 1 file changed, 18 insertions(+), 25 deletions(-)

diff --git a/arch/csky/include/asm/pgalloc.h b/arch/csky/include/asm/pgalloc.h
index bf4f4a0e140e..d213bb47b717 100644
--- a/arch/csky/include/asm/pgalloc.h
+++ b/arch/csky/include/asm/pgalloc.h
@@ -24,41 +24,34 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
 
 extern void pgd_init(unsigned long *p);
 
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-					unsigned long address)
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
 {
 	pte_t *pte;
-	unsigned long *kaddr, i;
+	unsigned long i;
 
-	pte = (pte_t *) __get_free_pages(GFP_KERNEL | __GFP_RETRY_MAYFAIL,
-					 PTE_ORDER);
-	kaddr = (unsigned long *)pte;
-	if (address & 0x80000000)
-		for (i = 0; i < (PAGE_SIZE/4); i++)
-			*(kaddr + i) = 0x1;
-	else
-		clear_page(kaddr);
+	pte = (pte_t *) __get_free_page(GFP_KERNEL);
+	if (!pte)
+		return NULL;
+
+	for (i = 0; i < PAGE_SIZE/sizeof(pte_t); i++)
+		(pte + i)->pte_low = _PAGE_GLOBAL;
 
 	return pte;
 }
 
-static inline struct page *pte_alloc_one(struct mm_struct *mm,
-						unsigned long address)
+static inline struct page *pte_alloc_one(struct mm_struct *mm)
 {
 	struct page *pte;
-	unsigned long *kaddr, i;
-
-	pte = alloc_pages(GFP_KERNEL | __GFP_RETRY_MAYFAIL, PTE_ORDER);
-	if (pte) {
-		kaddr = kmap_atomic(pte);
-		if (address & 0x80000000) {
-			for (i = 0; i < (PAGE_SIZE/4); i++)
-				*(kaddr + i) = 0x1;
-		} else
-			clear_page(kaddr);
-		kunmap_atomic(kaddr);
-		pgtable_page_ctor(pte);
+
+	pte = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0);
+	if (!pte)
+		return NULL;
+
+	if (!pgtable_page_ctor(pte)) {
+		__free_page(pte);
+		return NULL;
 	}
+
 	return pte;
 }
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 13/42] irqchip/csky: fixup handle_irq_perbit break irq
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (10 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 12/42] csky: fixup compile error with pte_alloc Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 14/42] drm/amd/powerplay: avoid possible buffer overflow Sasha Levin
                   ` (28 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Guo Ren, Lu Baoquan, Sasha Levin

From: Guo Ren <ren_guo@c-sky.com>

[ Upstream commit 56752b21755aef598709d143684cb363db98a7d2 ]

The handle_irq_perbit function loop every bit in hwirq local variable.

handle_irq_perbit(hwirq) {
  for_everyt_bit_in(hwirq) {
	handle_domain_irq()
		->irq_exit()
		->invoke_softirq()
		->__do_softirq()
		->local_irq_enable() // Here will cause new interrupt.
  }
}

When new interrupt coming at local_irq_enable, it will finish another
interrupt handler and pull down the interrupt source. But hwirq is the
local variable for handle_irq_perbit(), it can't get new interrupt
controller pending reg status. So we need update hwirq with pending reg
in every loop.

Also change write_relax to writel could prevent stw from fast retire.
When local_irq is enabled, intc regs is really set-in.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Lu Baoquan <lu.baoquan@intellif.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-csky-apb-intc.c | 77 ++++++++++++++++-------------
 1 file changed, 42 insertions(+), 35 deletions(-)

diff --git a/drivers/irqchip/irq-csky-apb-intc.c b/drivers/irqchip/irq-csky-apb-intc.c
index 2543baba8b1f..5a2ec43b7ddd 100644
--- a/drivers/irqchip/irq-csky-apb-intc.c
+++ b/drivers/irqchip/irq-csky-apb-intc.c
@@ -95,7 +95,7 @@ static inline void setup_irq_channel(u32 magic, void __iomem *reg_addr)
 
 	/* Setup 64 channel slots */
 	for (i = 0; i < INTC_IRQS; i += 4)
-		writel_relaxed(build_channel_val(i, magic), reg_addr + i);
+		writel(build_channel_val(i, magic), reg_addr + i);
 }
 
 static int __init
@@ -135,16 +135,10 @@ ck_intc_init_comm(struct device_node *node, struct device_node *parent)
 static inline bool handle_irq_perbit(struct pt_regs *regs, u32 hwirq,
 				     u32 irq_base)
 {
-	u32 irq;
-
 	if (hwirq == 0)
 		return 0;
 
-	while (hwirq) {
-		irq = __ffs(hwirq);
-		hwirq &= ~BIT(irq);
-		handle_domain_irq(root_domain, irq_base + irq, regs);
-	}
+	handle_domain_irq(root_domain, irq_base + __fls(hwirq), regs);
 
 	return 1;
 }
@@ -154,12 +148,16 @@ static void gx_irq_handler(struct pt_regs *regs)
 {
 	bool ret;
 
-	do {
-		ret  = handle_irq_perbit(regs,
-				readl_relaxed(reg_base + GX_INTC_PEN31_00), 0);
-		ret |= handle_irq_perbit(regs,
-				readl_relaxed(reg_base + GX_INTC_PEN63_32), 32);
-	} while (ret);
+retry:
+	ret = handle_irq_perbit(regs,
+			readl(reg_base + GX_INTC_PEN63_32), 32);
+	if (ret)
+		goto retry;
+
+	ret = handle_irq_perbit(regs,
+			readl(reg_base + GX_INTC_PEN31_00), 0);
+	if (ret)
+		goto retry;
 }
 
 static int __init
@@ -174,14 +172,14 @@ gx_intc_init(struct device_node *node, struct device_node *parent)
 	/*
 	 * Initial enable reg to disable all interrupts
 	 */
-	writel_relaxed(0x0, reg_base + GX_INTC_NEN31_00);
-	writel_relaxed(0x0, reg_base + GX_INTC_NEN63_32);
+	writel(0x0, reg_base + GX_INTC_NEN31_00);
+	writel(0x0, reg_base + GX_INTC_NEN63_32);
 
 	/*
 	 * Initial mask reg with all unmasked, because we only use enalbe reg
 	 */
-	writel_relaxed(0x0, reg_base + GX_INTC_NMASK31_00);
-	writel_relaxed(0x0, reg_base + GX_INTC_NMASK63_32);
+	writel(0x0, reg_base + GX_INTC_NMASK31_00);
+	writel(0x0, reg_base + GX_INTC_NMASK63_32);
 
 	setup_irq_channel(0x03020100, reg_base + GX_INTC_SOURCE);
 
@@ -204,20 +202,29 @@ static void ck_irq_handler(struct pt_regs *regs)
 	void __iomem *reg_pen_lo = reg_base + CK_INTC_PEN31_00;
 	void __iomem *reg_pen_hi = reg_base + CK_INTC_PEN63_32;
 
-	do {
-		/* handle 0 - 31 irqs */
-		ret  = handle_irq_perbit(regs, readl_relaxed(reg_pen_lo), 0);
-		ret |= handle_irq_perbit(regs, readl_relaxed(reg_pen_hi), 32);
+retry:
+	/* handle 0 - 63 irqs */
+	ret = handle_irq_perbit(regs, readl(reg_pen_hi), 32);
+	if (ret)
+		goto retry;
 
-		if (nr_irq == INTC_IRQS)
-			continue;
+	ret = handle_irq_perbit(regs, readl(reg_pen_lo), 0);
+	if (ret)
+		goto retry;
+
+	if (nr_irq == INTC_IRQS)
+		return;
 
-		/* handle 64 - 127 irqs */
-		ret |= handle_irq_perbit(regs,
-			readl_relaxed(reg_pen_lo + CK_INTC_DUAL_BASE), 64);
-		ret |= handle_irq_perbit(regs,
-			readl_relaxed(reg_pen_hi + CK_INTC_DUAL_BASE), 96);
-	} while (ret);
+	/* handle 64 - 127 irqs */
+	ret = handle_irq_perbit(regs,
+			readl(reg_pen_hi + CK_INTC_DUAL_BASE), 96);
+	if (ret)
+		goto retry;
+
+	ret = handle_irq_perbit(regs,
+			readl(reg_pen_lo + CK_INTC_DUAL_BASE), 64);
+	if (ret)
+		goto retry;
 }
 
 static int __init
@@ -230,11 +237,11 @@ ck_intc_init(struct device_node *node, struct device_node *parent)
 		return ret;
 
 	/* Initial enable reg to disable all interrupts */
-	writel_relaxed(0, reg_base + CK_INTC_NEN31_00);
-	writel_relaxed(0, reg_base + CK_INTC_NEN63_32);
+	writel(0, reg_base + CK_INTC_NEN31_00);
+	writel(0, reg_base + CK_INTC_NEN63_32);
 
 	/* Enable irq intc */
-	writel_relaxed(BIT(31), reg_base + CK_INTC_ICR);
+	writel(BIT(31), reg_base + CK_INTC_ICR);
 
 	ck_set_gc(node, reg_base, CK_INTC_NEN31_00, 0);
 	ck_set_gc(node, reg_base, CK_INTC_NEN63_32, 32);
@@ -260,8 +267,8 @@ ck_dual_intc_init(struct device_node *node, struct device_node *parent)
 		return ret;
 
 	/* Initial enable reg to disable all interrupts */
-	writel_relaxed(0, reg_base + CK_INTC_NEN31_00 + CK_INTC_DUAL_BASE);
-	writel_relaxed(0, reg_base + CK_INTC_NEN63_32 + CK_INTC_DUAL_BASE);
+	writel(0, reg_base + CK_INTC_NEN31_00 + CK_INTC_DUAL_BASE);
+	writel(0, reg_base + CK_INTC_NEN63_32 + CK_INTC_DUAL_BASE);
 
 	ck_set_gc(node, reg_base + CK_INTC_DUAL_BASE, CK_INTC_NEN31_00, 64);
 	ck_set_gc(node, reg_base + CK_INTC_DUAL_BASE, CK_INTC_NEN63_32, 96);
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 14/42] drm/amd/powerplay: avoid possible buffer overflow
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (11 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 13/42] irqchip/csky: fixup handle_irq_perbit break irq Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 15/42] drm/bridge: tc358767: add bus flags Sasha Levin
                   ` (27 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Evan Quan, Alex Deucher, Sasha Levin

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit fff0d3f7686942bd544b53a48d1b76bd62c46946 ]

Make sure the clock level enforced is within the allowed
ranges.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
index 3b7fce5d7258..b9e19b0eb905 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
@@ -2244,6 +2244,13 @@ static int vega20_force_clock_level(struct pp_hwmgr *hwmgr,
 		soft_min_level = mask ? (ffs(mask) - 1) : 0;
 		soft_max_level = mask ? (fls(mask) - 1) : 0;
 
+		if (soft_max_level >= data->dpm_table.gfx_table.count) {
+			pr_err("Clock level specified %d is over max allowed %d\n",
+					soft_max_level,
+					data->dpm_table.gfx_table.count - 1);
+			return -EINVAL;
+		}
+
 		data->dpm_table.gfx_table.dpm_state.soft_min_level =
 			data->dpm_table.gfx_table.dpm_levels[soft_min_level].value;
 		data->dpm_table.gfx_table.dpm_state.soft_max_level =
@@ -2264,6 +2271,13 @@ static int vega20_force_clock_level(struct pp_hwmgr *hwmgr,
 		soft_min_level = mask ? (ffs(mask) - 1) : 0;
 		soft_max_level = mask ? (fls(mask) - 1) : 0;
 
+		if (soft_max_level >= data->dpm_table.mem_table.count) {
+			pr_err("Clock level specified %d is over max allowed %d\n",
+					soft_max_level,
+					data->dpm_table.mem_table.count - 1);
+			return -EINVAL;
+		}
+
 		data->dpm_table.mem_table.dpm_state.soft_min_level =
 			data->dpm_table.mem_table.dpm_levels[soft_min_level].value;
 		data->dpm_table.mem_table.dpm_state.soft_max_level =
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 15/42] drm/bridge: tc358767: add bus flags
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (12 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 14/42] drm/amd/powerplay: avoid possible buffer overflow Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 16/42] drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE Sasha Levin
                   ` (26 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tomi Valkeinen, Andrzej Hajda, Sasha Levin, dri-devel

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

[ Upstream commit 4842379cbe6e851de914a7132f76f4e200b9a98b ]

tc358767 driver does not set DRM bus_flags, even if it does configures
the polarity settings into its registers. This means that the DPI source
can't configure the polarities correctly.

Add sync flags accordingly.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-2-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/tc358767.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 8e28e738cb52..29a7e33e8ae0 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1195,6 +1195,10 @@ static int tc_bridge_attach(struct drm_bridge *bridge)
 
 	drm_display_info_set_bus_formats(&tc->connector.display_info,
 					 &bus_format, 1);
+	tc->connector.display_info.bus_flags =
+		DRM_BUS_FLAG_DE_HIGH |
+		DRM_BUS_FLAG_PIXDATA_NEGEDGE |
+		DRM_BUS_FLAG_SYNC_NEGEDGE;
 	drm_connector_attach_encoder(&tc->connector, tc->bridge.encoder);
 
 	return 0;
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 16/42] drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (13 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 15/42] drm/bridge: tc358767: add bus flags Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 17/42] drm/bridge: tc358767: fix single lane configuration Sasha Levin
                   ` (25 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tomi Valkeinen, Andrzej Hajda, Sasha Levin, dri-devel

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

[ Upstream commit adf4109896bbee27fd2ac3b48d22d6a0062fe517 ]

DP1_SRCCTRL register and PHY_2LANE field did not have matching defines.
Add these.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-3-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/tc358767.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 29a7e33e8ae0..5f0a666db2fd 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -142,6 +142,8 @@
 #define DP0_LTLOOPCTRL		0x06d8
 #define DP0_SNKLTCTRL		0x06e4
 
+#define DP1_SRCCTRL		0x07a0
+
 /* PHY */
 #define DP_PHY_CTRL		0x0800
 #define DP_PHY_RST			BIT(28)  /* DP PHY Global Soft Reset */
@@ -150,6 +152,7 @@
 #define PHY_M1_RST			BIT(12)  /* Reset PHY1 Main Channel */
 #define PHY_RDY				BIT(16)  /* PHY Main Channels Ready */
 #define PHY_M0_RST			BIT(8)   /* Reset PHY0 Main Channel */
+#define PHY_2LANE			BIT(2)   /* PHY Enable 2 lanes */
 #define PHY_A0_EN			BIT(1)   /* PHY Aux Channel0 Enable */
 #define PHY_M0_EN			BIT(0)   /* PHY Main Channel0 Enable */
 
@@ -564,7 +567,7 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
 	tc_write(SYS_PLLPARAM, value);
 
-	tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN);
+	tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | PHY_2LANE | PHY_A0_EN);
 
 	/*
 	 * Initially PLLs are in bypass. Force PLL parameter update,
@@ -834,7 +837,7 @@ static int tc_main_link_setup(struct tc_data *tc)
 		 DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_LANES_2 |
 		 DP0_SRCCTRL_BW27 | DP0_SRCCTRL_AUTOCORRECT);
 	/* from excel file - DP1_SrcCtrl */
-	tc_write(0x07a0, 0x00003083);
+	tc_write(DP1_SRCCTRL, 0x00003083);
 
 	rate = clk_get_rate(tc->refclk);
 	switch (rate) {
@@ -855,8 +858,9 @@ static int tc_main_link_setup(struct tc_data *tc)
 	}
 	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
 	tc_write(SYS_PLLPARAM, value);
+
 	/* Setup Main Link */
-	dp_phy_ctrl = BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN |  PHY_M0_EN;
+	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_2LANE | PHY_A0_EN |  PHY_M0_EN;
 	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
 	msleep(100);
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 17/42] drm/bridge: tc358767: fix single lane configuration
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (14 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 16/42] drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 18/42] drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value Sasha Levin
                   ` (24 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tomi Valkeinen, Andrzej Hajda, Sasha Levin, dri-devel

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

[ Upstream commit 4d9d54a730434cc068dd3515ba6116697196f77b ]

PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use.

Set PHY_2LANE only when 2 lanes are used.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-4-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/tc358767.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 5f0a666db2fd..fee53422c31f 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -543,6 +543,7 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	unsigned long rate;
 	u32 value;
 	int ret;
+	u32 dp_phy_ctrl;
 
 	rate = clk_get_rate(tc->refclk);
 	switch (rate) {
@@ -567,7 +568,10 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
 	tc_write(SYS_PLLPARAM, value);
 
-	tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | PHY_2LANE | PHY_A0_EN);
+	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN;
+	if (tc->link.base.num_lanes == 2)
+		dp_phy_ctrl |= PHY_2LANE;
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
 
 	/*
 	 * Initially PLLs are in bypass. Force PLL parameter update,
@@ -860,7 +864,9 @@ static int tc_main_link_setup(struct tc_data *tc)
 	tc_write(SYS_PLLPARAM, value);
 
 	/* Setup Main Link */
-	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_2LANE | PHY_A0_EN |  PHY_M0_EN;
+	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN | PHY_M0_EN;
+	if (tc->link.base.num_lanes == 2)
+		dp_phy_ctrl |= PHY_2LANE;
 	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
 	msleep(100);
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 18/42] drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (15 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 17/42] drm/bridge: tc358767: fix single lane configuration Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 19/42] drm/bridge: tc358767: reject modes which require too much BW Sasha Levin
                   ` (23 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tomi Valkeinen, Andrzej Hajda, Sasha Levin, dri-devel

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

[ Upstream commit 9a63bd6fe1b5590ffa42ae2ed22ee21363293e31 ]

Initially DP0_SRCCTRL is set to a static value which includes
DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of
1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number.

This patch changes the configuration as follows:

Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct
value.

DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL:
SSCG and BW27. All other bits can be zero.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-5-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/tc358767.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index fee53422c31f..ab299f4debfa 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -836,12 +836,11 @@ static int tc_main_link_setup(struct tc_data *tc)
 	if (!tc->mode)
 		return -EINVAL;
 
-	/* from excel file - DP0_SrcCtrl */
-	tc_write(DP0_SRCCTRL, DP0_SRCCTRL_SCRMBLDIS | DP0_SRCCTRL_EN810B |
-		 DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_LANES_2 |
-		 DP0_SRCCTRL_BW27 | DP0_SRCCTRL_AUTOCORRECT);
-	/* from excel file - DP1_SrcCtrl */
-	tc_write(DP1_SRCCTRL, 0x00003083);
+	tc_write(DP0_SRCCTRL, tc_srcctrl(tc));
+	/* SSCG and BW27 on DP1 must be set to the same as on DP0 */
+	tc_write(DP1_SRCCTRL,
+		 (tc->link.spread ? DP0_SRCCTRL_SSCG : 0) |
+		 ((tc->link.base.rate != 162000) ? DP0_SRCCTRL_BW27 : 0));
 
 	rate = clk_get_rate(tc->refclk);
 	switch (rate) {
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 19/42] drm/bridge: tc358767: reject modes which require too much BW
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (16 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 18/42] drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 20/42] drm/bridge: tc358767: fix output H/V syncs Sasha Levin
                   ` (22 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tomi Valkeinen, Andrzej Hajda, Sasha Levin, dri-devel

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

[ Upstream commit 51b9e62eb6950c762162ab7eb8390990179be067 ]

The current driver accepts any videomode with pclk < 154MHz. This is not
correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be
supported.

Add code to reject modes that require more bandwidth that is available.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-6-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/tc358767.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index ab299f4debfa..a1f3dd2afbb1 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1114,10 +1114,20 @@ static bool tc_bridge_mode_fixup(struct drm_bridge *bridge,
 static enum drm_mode_status tc_connector_mode_valid(struct drm_connector *connector,
 				   struct drm_display_mode *mode)
 {
+	struct tc_data *tc = connector_to_tc(connector);
+	u32 req, avail;
+	u32 bits_per_pixel = 24;
+
 	/* DPI interface clock limitation: upto 154 MHz */
 	if (mode->clock > 154000)
 		return MODE_CLOCK_HIGH;
 
+	req = mode->clock * bits_per_pixel / 8;
+	avail = tc->link.base.num_lanes * tc->link.base.rate;
+
+	if (req > avail)
+		return MODE_BAD;
+
 	return MODE_OK;
 }
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 20/42] drm/bridge: tc358767: fix output H/V syncs
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (17 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 19/42] drm/bridge: tc358767: reject modes which require too much BW Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 21/42] nvme-pci: use the same attributes when freeing host_mem_desc_bufs Sasha Levin
                   ` (21 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tomi Valkeinen, Andrzej Hajda, Sasha Levin, dri-devel

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

[ Upstream commit 7923e09c7a766e2d58de7fc395bb84c18e5bc625 ]

The H and V syncs of the DP output are always set to active high. This
patch fixes the syncs by configuring them according to the videomode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-7-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/tc358767.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index a1f3dd2afbb1..391547358756 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -98,6 +98,8 @@
 #define DP0_STARTVAL		0x064c
 #define DP0_ACTIVEVAL		0x0650
 #define DP0_SYNCVAL		0x0654
+#define SYNCVAL_HS_POL_ACTIVE_LOW	(1 << 15)
+#define SYNCVAL_VS_POL_ACTIVE_LOW	(1 << 31)
 #define DP0_MISC		0x0658
 #define TU_SIZE_RECOMMENDED		(63) /* LSCLK cycles per TU */
 #define BPC_6				(0 << 5)
@@ -726,7 +728,9 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
 
 	tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
 
-	tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0));
+	tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0) |
+		 ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? SYNCVAL_HS_POL_ACTIVE_LOW : 0) |
+		 ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? SYNCVAL_VS_POL_ACTIVE_LOW : 0));
 
 	tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
 		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 21/42] nvme-pci: use the same attributes when freeing host_mem_desc_bufs.
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (18 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 20/42] drm/bridge: tc358767: fix output H/V syncs Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 22/42] nvme-pci: fix out of bounds access in nvme_cqe_pending Sasha Levin
                   ` (20 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Liviu Dudau, Christoph Hellwig, Sasha Levin, linux-nvme

From: Liviu Dudau <liviu@dudau.co.uk>

[ Upstream commit cc667f6d5de023ee131e96bb88e5cddca23272bd ]

When using HMB the PCIe host driver allocates host_mem_desc_bufs using
dma_alloc_attrs() but frees them using dma_free_coherent(). Use the
correct dma_free_attrs() function to free the buffers.

Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index c33bb201b884..0f45868e8af9 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1748,8 +1748,9 @@ static void nvme_free_host_mem(struct nvme_dev *dev)
 		struct nvme_host_mem_buf_desc *desc = &dev->host_mem_descs[i];
 		size_t size = le32_to_cpu(desc->size) * dev->ctrl.page_size;
 
-		dma_free_coherent(dev->dev, size, dev->host_mem_desc_bufs[i],
-				le64_to_cpu(desc->addr));
+		dma_free_attrs(dev->dev, size, dev->host_mem_desc_bufs[i],
+			       le64_to_cpu(desc->addr),
+			       DMA_ATTR_NO_KERNEL_MAPPING | DMA_ATTR_NO_WARN);
 	}
 
 	kfree(dev->host_mem_desc_bufs);
@@ -1815,8 +1816,9 @@ out_free_bufs:
 	while (--i >= 0) {
 		size_t size = le32_to_cpu(descs[i].size) * dev->ctrl.page_size;
 
-		dma_free_coherent(dev->dev, size, bufs[i],
-				le64_to_cpu(descs[i].addr));
+		dma_free_attrs(dev->dev, size, bufs[i],
+			       le64_to_cpu(descs[i].addr),
+			       DMA_ATTR_NO_KERNEL_MAPPING | DMA_ATTR_NO_WARN);
 	}
 
 	kfree(bufs);
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 22/42] nvme-pci: fix out of bounds access in nvme_cqe_pending
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (19 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 21/42] nvme-pci: use the same attributes when freeing host_mem_desc_bufs Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 23/42] nvme-multipath: zero out ANA log buffer Sasha Levin
                   ` (19 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hongbo Yao, Christoph Hellwig, Sasha Levin, linux-nvme

From: Hongbo Yao <yaohongbo@huawei.com>

[ Upstream commit dcca1662727220d18fa351097ddff33f95f516c5 ]

There is an out of bounds array access in nvme_cqe_peding().

When enable irq_thread for nvme interrupt, there is racing between the
nvmeq->cq_head updating and reading.

nvmeq->cq_head is updated in nvme_update_cq_head(), if nvmeq->cq_head
equals nvmeq->q_depth and before its value set to zero, nvme_cqe_pending()
uses its value as an array index, the index will be out of bounds.

Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
[hch: slight coding style update]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 0f45868e8af9..47597046c14f 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -913,9 +913,11 @@ static void nvme_complete_cqes(struct nvme_queue *nvmeq, u16 start, u16 end)
 
 static inline void nvme_update_cq_head(struct nvme_queue *nvmeq)
 {
-	if (++nvmeq->cq_head == nvmeq->q_depth) {
+	if (nvmeq->cq_head == nvmeq->q_depth - 1) {
 		nvmeq->cq_head = 0;
 		nvmeq->cq_phase = !nvmeq->cq_phase;
+	} else {
+		nvmeq->cq_head++;
 	}
 }
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 23/42] nvme-multipath: zero out ANA log buffer
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (20 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 22/42] nvme-pci: fix out of bounds access in nvme_cqe_pending Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 24/42] nvme: pad fake subsys NQN vid and ssvid with zeros Sasha Levin
                   ` (18 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Hannes Reinecke, Hannes Reinecke, Christoph Hellwig, Sasha Levin,
	linux-nvme

From: Hannes Reinecke <hare@suse.de>

[ Upstream commit c7055fd15ff46d92eb0dd1c16a4fe010d58224c8 ]

When nvme_init_identify() fails the ANA log buffer is deallocated
but _not_ set to NULL. This can cause double free oops when this
controller is deleted without ever being reconnected.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/multipath.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 9901afd804ce..2b1d1f066efa 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -586,6 +586,7 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
 	return 0;
 out_free_ana_log_buf:
 	kfree(ctrl->ana_log_buf);
+	ctrl->ana_log_buf = NULL;
 out:
 	return error;
 }
@@ -593,5 +594,6 @@ out:
 void nvme_mpath_uninit(struct nvme_ctrl *ctrl)
 {
 	kfree(ctrl->ana_log_buf);
+	ctrl->ana_log_buf = NULL;
 }
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 24/42] nvme: pad fake subsys NQN vid and ssvid with zeros
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (21 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 23/42] nvme-multipath: zero out ANA log buffer Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 25/42] nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN Sasha Levin
                   ` (17 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Keith Busch, Christoph Hellwig, Sasha Levin, linux-nvme

From: Keith Busch <keith.busch@intel.com>

[ Upstream commit 3da584f57133e51aeb84aaefae5e3d69531a1e4f ]

We need to preserve the leading zeros in the vid and ssvid when generating
a unique NQN. Truncating these may lead to naming collisions.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 962012135b62..971ca6754959 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2095,7 +2095,7 @@ static void nvme_init_subnqn(struct nvme_subsystem *subsys, struct nvme_ctrl *ct
 
 	/* Generate a "fake" NQN per Figure 254 in NVMe 1.3 + ECN 001 */
 	off = snprintf(subsys->subnqn, NVMF_NQN_SIZE,
-			"nqn.2014.08.org.nvmexpress:%4x%4x",
+			"nqn.2014.08.org.nvmexpress:%04x%04x",
 			le16_to_cpu(id->vid), le16_to_cpu(id->ssvid));
 	memcpy(subsys->subnqn + off, id->sn, sizeof(id->sn));
 	off += sizeof(id->sn);
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 25/42] nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (22 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 24/42] nvme: pad fake subsys NQN vid and ssvid with zeros Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 26/42] drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20 Sasha Levin
                   ` (16 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: James Dingwall, Christoph Hellwig, Sasha Levin, linux-nvme

From: James Dingwall <james@dingwall.me.uk>

[ Upstream commit 6299358d198a0635da2dd3c4b3ec37789e811e44 ]

If a device provides an NQN it is expected to be globally unique.
Unfortunately some firmware revisions for Intel 760p/Pro 7600p devices did
not satisfy this requirement.  In these circumstances if a system has >1
affected device then only one device is enabled.  If this quirk is enabled
then the device supplied subnqn is ignored and we fallback to generating
one as if the field was empty.  In this case we also suppress the version
check so we don't print a warning when the quirk is enabled.

Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: James Dingwall <james@dingwall.me.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 16 +++++++++-------
 drivers/nvme/host/nvme.h |  5 +++++
 drivers/nvme/host/pci.c  |  2 ++
 3 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 971ca6754959..5f9a5ef93969 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2084,14 +2084,16 @@ static void nvme_init_subnqn(struct nvme_subsystem *subsys, struct nvme_ctrl *ct
 	size_t nqnlen;
 	int off;
 
-	nqnlen = strnlen(id->subnqn, NVMF_NQN_SIZE);
-	if (nqnlen > 0 && nqnlen < NVMF_NQN_SIZE) {
-		strlcpy(subsys->subnqn, id->subnqn, NVMF_NQN_SIZE);
-		return;
-	}
+	if(!(ctrl->quirks & NVME_QUIRK_IGNORE_DEV_SUBNQN)) {
+		nqnlen = strnlen(id->subnqn, NVMF_NQN_SIZE);
+		if (nqnlen > 0 && nqnlen < NVMF_NQN_SIZE) {
+			strlcpy(subsys->subnqn, id->subnqn, NVMF_NQN_SIZE);
+			return;
+		}
 
-	if (ctrl->vs >= NVME_VS(1, 2, 1))
-		dev_warn(ctrl->device, "missing or invalid SUBNQN field.\n");
+		if (ctrl->vs >= NVME_VS(1, 2, 1))
+			dev_warn(ctrl->device, "missing or invalid SUBNQN field.\n");
+	}
 
 	/* Generate a "fake" NQN per Figure 254 in NVMe 1.3 + ECN 001 */
 	off = snprintf(subsys->subnqn, NVMF_NQN_SIZE,
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 081cbdcce880..6ffa99a10a60 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -90,6 +90,11 @@ enum nvme_quirks {
 	 * Set MEDIUM priority on SQ creation
 	 */
 	NVME_QUIRK_MEDIUM_PRIO_SQ		= (1 << 7),
+
+	/*
+	 * Ignore device provided subnqn.
+	 */
+	NVME_QUIRK_IGNORE_DEV_SUBNQN		= (1 << 8),
 };
 
 /*
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 47597046c14f..c0d01048ce4d 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2700,6 +2700,8 @@ static const struct pci_device_id nvme_id_table[] = {
 	{ PCI_VDEVICE(INTEL, 0xf1a5),	/* Intel 600P/P3100 */
 		.driver_data = NVME_QUIRK_NO_DEEPEST_PS |
 				NVME_QUIRK_MEDIUM_PRIO_SQ },
+	{ PCI_VDEVICE(INTEL, 0xf1a6),	/* Intel 760p/Pro 7600p */
+		.driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
 	{ PCI_VDEVICE(INTEL, 0x5845),	/* Qemu emulated controller */
 		.driver_data = NVME_QUIRK_IDENTIFY_CNS, },
 	{ PCI_DEVICE(0x1bb1, 0x0100),   /* Seagate Nytro Flash Storage */
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 26/42] drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (23 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 25/42] nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 27/42] drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang Sasha Levin
                   ` (15 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Tao Zhou, Alex Deucher, Sasha Levin, amd-gfx, dri-devel

From: Tao Zhou <tao.zhou1@amd.com>

[ Upstream commit 3e958fe67720b37d04ab8ef81b9d507a56a09bbc ]

Fix CPDMA hang in PRT mode for both VEGA10 and VEGA20

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Tested-by: Yukun.Li <yukun1.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 21363b2b2ee5..88ed064b3585 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -112,7 +112,10 @@ static const struct soc15_reg_golden golden_settings_gc_9_0[] =
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmTCP_CHAN_STEER_HI, 0xffffffff, 0x4a2c0e68),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmTCP_CHAN_STEER_LO, 0xffffffff, 0xb5d3f197),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmVGT_CACHE_INVALIDATION, 0x3fff3af3, 0x19200000),
-	SOC15_REG_GOLDEN_VALUE(GC, 0, mmVGT_GS_MAX_WAVE_ID, 0x00000fff, 0x000003ff)
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmVGT_GS_MAX_WAVE_ID, 0x00000fff, 0x000003ff),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmCP_MEC1_F32_INT_DIS, 0x00000000, 0x00000800),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmCP_MEC2_F32_INT_DIS, 0x00000000, 0x00000800),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmCP_DEBUG, 0x00000000, 0x00008000)
 };
 
 static const struct soc15_reg_golden golden_settings_gc_9_0_vg10[] =
@@ -134,10 +137,7 @@ static const struct soc15_reg_golden golden_settings_gc_9_0_vg10[] =
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRMI_UTCL1_CNTL2, 0x00030000, 0x00020000),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSPI_CONFIG_CNTL_1, 0x0000000f, 0x01000107),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmTD_CNTL, 0x00001800, 0x00000800),
-	SOC15_REG_GOLDEN_VALUE(GC, 0, mmWD_UTCL1_CNTL, 0x08000000, 0x08000080),
-	SOC15_REG_GOLDEN_VALUE(GC, 0, mmCP_MEC1_F32_INT_DIS, 0x00000000, 0x00000800),
-	SOC15_REG_GOLDEN_VALUE(GC, 0, mmCP_MEC2_F32_INT_DIS, 0x00000000, 0x00000800),
-	SOC15_REG_GOLDEN_VALUE(GC, 0, mmCP_DEBUG, 0x00000000, 0x00008000)
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmWD_UTCL1_CNTL, 0x08000000, 0x08000080)
 };
 
 static const struct soc15_reg_golden golden_settings_gc_9_0_vg20[] =
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 27/42] drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (24 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 26/42] drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20 Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 28/42] drm/amdgpu: disable system memory page tables for now Sasha Levin
                   ` (14 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Jim Qu, Alex Deucher, Sasha Levin, amd-gfx, dri-devel

From: Jim Qu <Jim.Qu@amd.com>

[ Upstream commit 0c6c8125582714e1fd3544983eba3d750db0f5b8 ]

effect asics: VEGA10 and VEGA12

Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
index 7a8c9172d30a..86d5dc5f8887 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
@@ -73,7 +73,6 @@ static const struct soc15_reg_golden golden_settings_sdma_4[] = {
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_RLC1_RB_WPTR_POLL_CNTL, 0x0000fff0, 0x00403000),
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_UTCL1_PAGE, 0x000003ff, 0x000003c0),
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_UTCL1_WATERMK, 0xfc000000, 0x00000000),
-	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CHICKEN_BITS, 0xfe931f07, 0x02831f07),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CLK_CTRL, 0xffffffff, 0x3f000100),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GFX_IB_CNTL, 0x800f0100, 0x00000100),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GFX_RB_WPTR_POLL_CNTL, 0x0000fff0, 0x00403000),
@@ -91,6 +90,7 @@ static const struct soc15_reg_golden golden_settings_sdma_4[] = {
 static const struct soc15_reg_golden golden_settings_sdma_vg10[] = {
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG, 0x0018773f, 0x00104002),
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104002),
+	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CHICKEN_BITS, 0xfe931f07, 0x02831d07),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG, 0x0018773f, 0x00104002),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104002)
 };
@@ -98,6 +98,7 @@ static const struct soc15_reg_golden golden_settings_sdma_vg10[] = {
 static const struct soc15_reg_golden golden_settings_sdma_vg12[] = {
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG, 0x0018773f, 0x00104001),
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104001),
+	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CHICKEN_BITS, 0xfe931f07, 0x02831d07),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG, 0x0018773f, 0x00104001),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104001)
 };
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 28/42] drm/amdgpu: disable system memory page tables for now
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (25 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 27/42] drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 29/42] ARM: dts: da850-evm: Correct the audio codec regulators Sasha Levin
                   ` (13 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Christian König, Alex Deucher, Sasha Levin, amd-gfx, dri-devel

From: Christian König <christian.koenig@amd.com>

[ Upstream commit 1c1eba86339c8517814863bc7dd21e2661a84e77 ]

We hit a problem with IOMMU with that. Disable until we have time to
debug further.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index 0877ff9a9594..8c9abaa7601a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -850,9 +850,6 @@ static void amdgpu_vm_bo_param(struct amdgpu_device *adev, struct amdgpu_vm *vm,
 	bp->size = amdgpu_vm_bo_size(adev, level);
 	bp->byte_align = AMDGPU_GPU_PAGE_SIZE;
 	bp->domain = AMDGPU_GEM_DOMAIN_VRAM;
-	if (bp->size <= PAGE_SIZE && adev->asic_type >= CHIP_VEGA10 &&
-	    adev->flags & AMD_IS_APU)
-		bp->domain |= AMDGPU_GEM_DOMAIN_GTT;
 	bp->domain = amdgpu_bo_get_preferred_pin_domain(adev, bp->domain);
 	bp->flags = AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS |
 		AMDGPU_GEM_CREATE_CPU_GTT_USWC;
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 29/42] ARM: dts: da850-evm: Correct the audio codec regulators
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (26 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 28/42] drm/amdgpu: disable system memory page tables for now Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 30/42] ARM: dts: da850-evm: Correct the sound card name Sasha Levin
                   ` (12 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Peter Ujfalusi, Sekhar Nori, Sasha Levin, devicetree

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 706edaa88835e3d8de8920584ad5da76dd3d6666 ]

Add the board level fixed regulators for 3.3V and 1.8V which is used to
power - among other things - the tlv320aic3106 codec.

Apart from removing the following warning during boot:
tlv320aic3x-codec 0-0018: Too high supply voltage(s) AVDD: 5000000, DVDD: 5000000

With the correct voltages the driver can select correct OCMV value to
reduce pop noise.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/da850-evm.dts | 29 +++++++++++++++++++++++++----
 1 file changed, 25 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index a3c9b346721d..482a54587b44 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -94,6 +94,28 @@
 		regulator-boot-on;
 	};
 
+	baseboard_3v3: fixedregulator-3v3 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	baseboard_1v8: fixedregulator-1v8 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	backlight_lcd: backlight-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "lcd_backlight_pwr";
@@ -210,10 +232,9 @@
 
 		/* Regulators */
 		IOVDD-supply = <&vdcdc2_reg>;
-		/* Derived from VBAT: Baseboard 3.3V / 1.8V */
-		AVDD-supply = <&vbat>;
-		DRVDD-supply = <&vbat>;
-		DVDD-supply = <&vbat>;
+		AVDD-supply = <&baseboard_3v3>;
+		DRVDD-supply = <&baseboard_3v3>;
+		DVDD-supply = <&baseboard_1v8>;
 	};
 	tca6416: gpio@20 {
 		compatible = "ti,tca6416";
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 30/42] ARM: dts: da850-evm: Correct the sound card name
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (27 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 29/42] ARM: dts: da850-evm: Correct the audio codec regulators Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 31/42] ARM: dts: da850-lcdk: Correct the audio codec regulators Sasha Levin
                   ` (11 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Peter Ujfalusi, Sekhar Nori, Sasha Levin, devicetree

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 7fca69d4e43fa1ae9cb4f652772c132dc5a659c6 ]

To avoid  the following error:
asoc-simple-card sound: ASoC: Failed to create card debugfs directory

Which is because the card name contains '/' character, which can not be
used in file or directory names.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/da850-evm.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 482a54587b44..f04bc3e15332 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -127,7 +127,7 @@
 
 	sound {
 		compatible = "simple-audio-card";
-		simple-audio-card,name = "DA850/OMAP-L138 EVM";
+		simple-audio-card,name = "DA850-OMAPL138 EVM";
 		simple-audio-card,widgets =
 			"Line", "Line In",
 			"Line", "Line Out";
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 31/42] ARM: dts: da850-lcdk: Correct the audio codec regulators
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (28 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 30/42] ARM: dts: da850-evm: Correct the sound card name Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 32/42] ARM: dts: da850-lcdk: Correct the sound card name Sasha Levin
                   ` (10 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Peter Ujfalusi, Sekhar Nori, Sasha Levin, devicetree

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit bd540ebe68c3017194a1caa38e075bbbc0832749 ]

Add the board level fixed regulators for 3.3V and 1.8V which is used to
power - among other things - the tlv320aic3106 codec.

Apart from removing the following warning during boot:
tlv320aic3x-codec 0-0018: Invalid supply voltage(s) AVDD: -22, DVDD: -22

With the correct voltages the driver can select correct OCMV value to
reduce pop noise.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/da850-lcdk.dts | 36 ++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 0177e3ed20fe..c196e37606c4 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -39,6 +39,36 @@
 		};
 	};
 
+	vcc_5vd: fixedregulator-vcc_5vd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5vd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vcc_3v3d: fixedregulator-vcc_3v3d {
+		/* TPS650250 - VDCDC1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3d";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5vd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_1v8d: fixedregulator-vcc_1v8d {
+		/* TPS650250 - VDCDC2 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8d";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_5vd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "DA850/OMAP-L138 LCDK";
@@ -221,6 +251,12 @@
 		compatible = "ti,tlv320aic3106";
 		reg = <0x18>;
 		status = "okay";
+
+		/* Regulators */
+		IOVDD-supply = <&vcc_3v3d>;
+		AVDD-supply = <&vcc_3v3d>;
+		DRVDD-supply = <&vcc_3v3d>;
+		DVDD-supply = <&vcc_1v8d>;
 	};
 };
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 32/42] ARM: dts: da850-lcdk: Correct the sound card name
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (29 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 31/42] ARM: dts: da850-lcdk: Correct the audio codec regulators Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 33/42] ARM: dts: kirkwood: Fix polarity of GPIO fan lines Sasha Levin
                   ` (9 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Peter Ujfalusi, Sekhar Nori, Sasha Levin, devicetree

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit c25748acc5c20786ecb7518bfeae8fcef93472d6 ]

To avoid  the following error:
asoc-simple-card sound: ASoC: Failed to create card debugfs directory

Which is because the card name contains '/' character, which can not be
used in file or directory names.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/da850-lcdk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index c196e37606c4..3a2fa6e035a3 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -71,7 +71,7 @@
 
 	sound {
 		compatible = "simple-audio-card";
-		simple-audio-card,name = "DA850/OMAP-L138 LCDK";
+		simple-audio-card,name = "DA850-OMAPL138 LCDK";
 		simple-audio-card,widgets =
 			"Line", "Line In",
 			"Line", "Line Out";
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 33/42] ARM: dts: kirkwood: Fix polarity of GPIO fan lines
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (30 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 32/42] ARM: dts: da850-lcdk: Correct the sound card name Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 34/42] csky: fixup compile error with CPU 810 Sasha Levin
                   ` (8 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Linus Walleij, Jamie Lentin, Guenter Roeck, Jason Cooper,
	Andrew Lunn, Gregory Clement, Sebastian Hesselbarth,
	Julien D'Ascenzio, Sasha Levin, devicetree

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit b5f034845e70916fd33e172fad5ad530a29c10ab ]

These two lines are active high, not active low. The bug was
found when we changed the kernel to respect the polarity defined
in the device tree.

Fixes: 1b90e06b1429 ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan")
Cc: Jamie Lentin <jm@lentin.co.uk>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Julien D'Ascenzio <jdascenzio@posteo.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Reported-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Tested-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/kirkwood-dnskw.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index cbaf06f2f78e..eb917462b219 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -36,8 +36,8 @@
 		compatible = "gpio-fan";
 		pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
 		pinctrl-names = "default";
-		gpios = <&gpio1 14 GPIO_ACTIVE_LOW
-			 &gpio1 13 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
+			 &gpio1 13 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0    0
 				      3000 1
 				      6000 2>;
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 34/42] csky: fixup compile error with CPU 810.
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (31 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 33/42] ARM: dts: kirkwood: Fix polarity of GPIO fan lines Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 35/42] gpio: pl061: handle failed allocations Sasha Levin
                   ` (7 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Guo Ren, Arnd Bergmann, Linus Torvalds, Sasha Levin

From: Guo Ren <ren_guo@c-sky.com>

[ Upstream commit 70c25259537c073584eb906865307687275b527f ]

This bug is from commit f553aa1c13cb ("csky: fixup relocation error with
807 & 860").

I forgot to compile with 810 for that patch.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/csky/kernel/module.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/csky/kernel/module.c b/arch/csky/kernel/module.c
index 0b028ee3c764..b5ad7d9de18c 100644
--- a/arch/csky/kernel/module.c
+++ b/arch/csky/kernel/module.c
@@ -28,7 +28,7 @@
 
 static void jsri_2_lrw_jsr(uint32_t *location)
 {
-	uint16_t location_tmp = (uint16_t *)location;
+	uint16_t *location_tmp = (uint16_t *)location;
 
 	if (IS_BSR32(*location_tmp, *(location_tmp + 1)))
 		return;
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 35/42] gpio: pl061: handle failed allocations
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (32 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 34/42] csky: fixup compile error with CPU 810 Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 36/42] drm/nouveau: Don't disable polling in fallback mode Sasha Levin
                   ` (6 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Nicholas Mc Guire, Linus Walleij, Sasha Levin

From: Nicholas Mc Guire <hofrat@osadl.org>

[ Upstream commit df209c43a0e8258e096fb722dfbdae4f0dd13fde ]

devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can
fail internal allocation and return NULL. Using any of the assigned
objects without checking is not safe. As this is early in the boot
phase and these allocations really should not fail, any failure here
is probably an indication of a more serious issue so it makes little
sense to try and rollback the previous allocated resources or try to
continue;  but rather the probe function is simply exited with -ENOMEM.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 684284b64aae ("ARM: integrator: add MMCI device to IM-PD1")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-integrator/impd1.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index a109f6482413..0f916c245a2e 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -393,7 +393,11 @@ static int __ref impd1_probe(struct lm_device *dev)
 					      sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup),
 					      GFP_KERNEL);
 			chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL);
-			mmciname = kasprintf(GFP_KERNEL, "lm%x:00700", dev->id);
+			mmciname = devm_kasprintf(&dev->dev, GFP_KERNEL,
+						  "lm%x:00700", dev->id);
+			if (!lookup || !chipname || !mmciname)
+				return -ENOMEM;
+
 			lookup->dev_id = mmciname;
 			/*
 			 * Offsets on GPIO block 1:
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 36/42] drm/nouveau: Don't disable polling in fallback mode
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (33 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 35/42] gpio: pl061: handle failed allocations Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 37/42] drm/nouveau/falcon: avoid touching registers if engine is off Sasha Levin
                   ` (5 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Takashi Iwai, Ben Skeggs, Sasha Levin, dri-devel, nouveau

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 118780066e30c34de3d9349710b51780bfa0ba83 ]

When a fan is controlled via linear fallback without cstate, we
shouldn't stop polling.  Otherwise it won't be adjusted again and
keeps running at an initial crazy pace.

Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios")
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447
Reported-by: Thomas Blume <thomas.blume@suse.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c
index 3695cde669f8..07914e36939e 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c
@@ -132,11 +132,12 @@ nvkm_therm_update(struct nvkm_therm *therm, int mode)
 			duty = nvkm_therm_update_linear(therm);
 			break;
 		case NVBIOS_THERM_FAN_OTHER:
-			if (therm->cstate)
+			if (therm->cstate) {
 				duty = therm->cstate;
-			else
+				poll = false;
+			} else {
 				duty = nvkm_therm_update_linear_fallback(therm);
-			poll = false;
+			}
 			break;
 		}
 		immd = false;
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 37/42] drm/nouveau/falcon: avoid touching registers if engine is off
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (34 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 36/42] drm/nouveau: Don't disable polling in fallback mode Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 38/42] cifs: Limit memory used by lock request calls to a page Sasha Levin
                   ` (4 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ilia Mirkin, Ben Skeggs, Sasha Levin, dri-devel, nouveau

From: Ilia Mirkin <imirkin@alum.mit.edu>

[ Upstream commit a5176a4cb85bb6213daadf691097cf411da35df2 ]

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/engine/falcon.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/falcon.c b/drivers/gpu/drm/nouveau/nvkm/engine/falcon.c
index 816ccaedfc73..8675613e142b 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/falcon.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/falcon.c
@@ -22,6 +22,7 @@
 #include <engine/falcon.h>
 
 #include <core/gpuobj.h>
+#include <subdev/mc.h>
 #include <subdev/timer.h>
 #include <engine/fifo.h>
 
@@ -107,8 +108,10 @@ nvkm_falcon_fini(struct nvkm_engine *engine, bool suspend)
 		}
 	}
 
-	nvkm_mask(device, base + 0x048, 0x00000003, 0x00000000);
-	nvkm_wr32(device, base + 0x014, 0xffffffff);
+	if (nvkm_mc_enabled(device, engine->subdev.index)) {
+		nvkm_mask(device, base + 0x048, 0x00000003, 0x00000000);
+		nvkm_wr32(device, base + 0x014, 0xffffffff);
+	}
 	return 0;
 }
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 38/42] cifs: Limit memory used by lock request calls to a page
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (35 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 37/42] drm/nouveau/falcon: avoid touching registers if engine is off Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 39/42] CIFS: Fix credits calculation for cancelled requests Sasha Levin
                   ` (3 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Ross Lagerwall, Steve French, Sasha Levin, linux-cifs

From: Ross Lagerwall <ross.lagerwall@citrix.com>

[ Upstream commit 92a8109e4d3a34fb6b115c9098b51767dc933444 ]

The code tries to allocate a contiguous buffer with a size supplied by
the server (maxBuf). This could fail if memory is fragmented since it
results in high order allocations for commonly used server
implementations. It is also wasteful since there are probably
few locks in the usual case. Limit the buffer to be no larger than a
page to avoid memory allocation failures due to fragmentation.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/file.c     | 8 ++++++++
 fs/cifs/smb2file.c | 4 ++++
 2 files changed, 12 insertions(+)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 8431854b129f..116f8af0384f 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1139,6 +1139,10 @@ cifs_push_mandatory_locks(struct cifsFileInfo *cfile)
 		return -EINVAL;
 	}
 
+	BUILD_BUG_ON(sizeof(struct smb_hdr) + sizeof(LOCKING_ANDX_RANGE) >
+		     PAGE_SIZE);
+	max_buf = min_t(unsigned int, max_buf - sizeof(struct smb_hdr),
+			PAGE_SIZE);
 	max_num = (max_buf - sizeof(struct smb_hdr)) /
 						sizeof(LOCKING_ANDX_RANGE);
 	buf = kcalloc(max_num, sizeof(LOCKING_ANDX_RANGE), GFP_KERNEL);
@@ -1477,6 +1481,10 @@ cifs_unlock_range(struct cifsFileInfo *cfile, struct file_lock *flock,
 	if (max_buf < (sizeof(struct smb_hdr) + sizeof(LOCKING_ANDX_RANGE)))
 		return -EINVAL;
 
+	BUILD_BUG_ON(sizeof(struct smb_hdr) + sizeof(LOCKING_ANDX_RANGE) >
+		     PAGE_SIZE);
+	max_buf = min_t(unsigned int, max_buf - sizeof(struct smb_hdr),
+			PAGE_SIZE);
 	max_num = (max_buf - sizeof(struct smb_hdr)) /
 						sizeof(LOCKING_ANDX_RANGE);
 	buf = kcalloc(max_num, sizeof(LOCKING_ANDX_RANGE), GFP_KERNEL);
diff --git a/fs/cifs/smb2file.c b/fs/cifs/smb2file.c
index 2fc3d31967ee..b204e84b87fb 100644
--- a/fs/cifs/smb2file.c
+++ b/fs/cifs/smb2file.c
@@ -128,6 +128,8 @@ smb2_unlock_range(struct cifsFileInfo *cfile, struct file_lock *flock,
 	if (max_buf < sizeof(struct smb2_lock_element))
 		return -EINVAL;
 
+	BUILD_BUG_ON(sizeof(struct smb2_lock_element) > PAGE_SIZE);
+	max_buf = min_t(unsigned int, max_buf, PAGE_SIZE);
 	max_num = max_buf / sizeof(struct smb2_lock_element);
 	buf = kcalloc(max_num, sizeof(struct smb2_lock_element), GFP_KERNEL);
 	if (!buf)
@@ -264,6 +266,8 @@ smb2_push_mandatory_locks(struct cifsFileInfo *cfile)
 		return -EINVAL;
 	}
 
+	BUILD_BUG_ON(sizeof(struct smb2_lock_element) > PAGE_SIZE);
+	max_buf = min_t(unsigned int, max_buf, PAGE_SIZE);
 	max_num = max_buf / sizeof(struct smb2_lock_element);
 	buf = kcalloc(max_num, sizeof(struct smb2_lock_element), GFP_KERNEL);
 	if (!buf) {
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 39/42] CIFS: Fix credits calculation for cancelled requests
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (36 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 38/42] cifs: Limit memory used by lock request calls to a page Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 40/42] CIFS: Move credit processing to mid callbacks for SMB3 Sasha Levin
                   ` (2 subsequent siblings)
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Pavel Shilovsky, Steve French, Sasha Levin, linux-cifs

From: Pavel Shilovsky <pshilov@microsoft.com>

[ Upstream commit 8a26f0f781f56d3016b34a2217e346973d067e7b ]

If a request is cancelled, we can't assume that the server returns
1 credit back. Instead we need to wait for a response and process
the number of credits granted by the server.

Create a separate mid callback for cancelled request, parse the number
of credits in a response buffer and add them to the client's credits.
If the didn't get a response (no response buffer available) assume
0 credits granted. The latter most probably happens together with
session reconnect, so the client's credits are adjusted anyway.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/cifsglob.h  |  1 +
 fs/cifs/transport.c | 28 ++++++++++++++++++++++++++--
 2 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 38ab0fca49e1..7a4fae0dc566 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -1426,6 +1426,7 @@ struct mid_q_entry {
 	int mid_state;	/* wish this were enum but can not pass to wait_event */
 	unsigned int mid_flags;
 	__le16 command;		/* smb command code */
+	unsigned int optype;	/* operation type */
 	bool large_buf:1;	/* if valid response, is pointer to large buf */
 	bool multiRsp:1;	/* multiple trans2 responses for one request  */
 	bool multiEnd:1;	/* both received */
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index d51064c1ba42..4dbf62bb51b2 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -785,6 +785,24 @@ cifs_noop_callback(struct mid_q_entry *mid)
 {
 }
 
+static void
+cifs_cancelled_callback(struct mid_q_entry *mid)
+{
+	struct TCP_Server_Info *server = mid->server;
+	unsigned int optype = mid->optype;
+	unsigned int credits_received = 0;
+
+	if (mid->mid_state == MID_RESPONSE_RECEIVED) {
+		if (mid->resp_buf)
+			credits_received = server->ops->get_credits(mid);
+		else
+			cifs_dbg(FYI, "Bad state for cancelled MID\n");
+	}
+
+	DeleteMidQEntry(mid);
+	add_credits(server, credits_received, optype);
+}
+
 int
 compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
 		   const int flags, const int num_rqst, struct smb_rqst *rqst,
@@ -860,6 +878,7 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
 		}
 
 		midQ[i]->mid_state = MID_REQUEST_SUBMITTED;
+		midQ[i]->optype = optype;
 		/*
 		 * We don't invoke the callback compounds unless it is the last
 		 * request.
@@ -894,15 +913,20 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
 
 	for (i = 0; i < num_rqst; i++) {
 		rc = wait_for_response(ses->server, midQ[i]);
-		if (rc != 0) {
+		if (rc != 0)
+			break;
+	}
+	if (rc != 0) {
+		for (; i < num_rqst; i++) {
 			cifs_dbg(VFS, "Cancelling wait for mid %llu cmd: %d\n",
 				 midQ[i]->mid, le16_to_cpu(midQ[i]->command));
 			send_cancel(ses->server, &rqst[i], midQ[i]);
 			spin_lock(&GlobalMid_Lock);
 			if (midQ[i]->mid_state == MID_REQUEST_SUBMITTED) {
 				midQ[i]->mid_flags |= MID_WAIT_CANCELLED;
-				midQ[i]->callback = DeleteMidQEntry;
+				midQ[i]->callback = cifs_cancelled_callback;
 				cancelled_mid[i] = true;
+				credits[i] = 0;
 			}
 			spin_unlock(&GlobalMid_Lock);
 		}
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 40/42] CIFS: Move credit processing to mid callbacks for SMB3
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (37 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 39/42] CIFS: Fix credits calculation for cancelled requests Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-12  1:48   ` Pavel Shilovskiy
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 41/42] CIFS: Fix error paths in writeback code Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 42/42] kvm: sev: Fail KVM_SEV_INIT if already initialized Sasha Levin
  40 siblings, 1 reply; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Pavel Shilovsky, Steve French, Sasha Levin, linux-cifs

From: Pavel Shilovsky <pshilov@microsoft.com>

[ Upstream commit ee258d79159afed52ca9372aeb9c1a51e89b32ee ]

Currently we account for credits in the thread initiating a request
and waiting for a response. The demultiplex thread receives the response,
wakes up the thread and the latter collects credits from the response
buffer and add them to the server structure on the client. This approach
is not accurate, because it may race with reconnect events in the
demultiplex thread which resets the number of credits.

Fix this by moving credit processing to new mid callbacks that collect
credits granted by the server from the response in the demultiplex thread.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/transport.c | 51 ++++++++++++++++++++++++++++++---------------
 1 file changed, 34 insertions(+), 17 deletions(-)

diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 4dbf62bb51b2..0dab276eced8 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -781,12 +781,7 @@ cifs_setup_request(struct cifs_ses *ses, struct smb_rqst *rqst)
 }
 
 static void
-cifs_noop_callback(struct mid_q_entry *mid)
-{
-}
-
-static void
-cifs_cancelled_callback(struct mid_q_entry *mid)
+cifs_compound_callback(struct mid_q_entry *mid)
 {
 	struct TCP_Server_Info *server = mid->server;
 	unsigned int optype = mid->optype;
@@ -799,10 +794,23 @@ cifs_cancelled_callback(struct mid_q_entry *mid)
 			cifs_dbg(FYI, "Bad state for cancelled MID\n");
 	}
 
-	DeleteMidQEntry(mid);
 	add_credits(server, credits_received, optype);
 }
 
+static void
+cifs_compound_last_callback(struct mid_q_entry *mid)
+{
+	cifs_compound_callback(mid);
+	cifs_wake_up_task(mid);
+}
+
+static void
+cifs_cancelled_callback(struct mid_q_entry *mid)
+{
+	cifs_compound_callback(mid);
+	DeleteMidQEntry(mid);
+}
+
 int
 compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
 		   const int flags, const int num_rqst, struct smb_rqst *rqst,
@@ -880,11 +888,14 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
 		midQ[i]->mid_state = MID_REQUEST_SUBMITTED;
 		midQ[i]->optype = optype;
 		/*
-		 * We don't invoke the callback compounds unless it is the last
-		 * request.
+		 * Invoke callback for every part of the compound chain
+		 * to calculate credits properly. Wake up this thread only when
+		 * the last element is received.
 		 */
 		if (i < num_rqst - 1)
-			midQ[i]->callback = cifs_noop_callback;
+			midQ[i]->callback = cifs_compound_callback;
+		else
+			midQ[i]->callback = cifs_compound_last_callback;
 	}
 	cifs_in_send_inc(ses->server);
 	rc = smb_send_rqst(ses->server, num_rqst, rqst, flags);
@@ -898,8 +909,20 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
 
 	mutex_unlock(&ses->server->srv_mutex);
 
-	if (rc < 0)
+	if (rc < 0) {
+		/* Sending failed for some reason - return credits back */
+		for (i = 0; i < num_rqst; i++)
+			add_credits(ses->server, credits[i], optype);
 		goto out;
+	}
+
+	/*
+	 * At this point the request is passed to the network stack - we assume
+	 * that any credits taken from the server structure on the client have
+	 * been spent and we can't return them back. Once we receive responses
+	 * we will collect credits granted by the server in the mid callbacks
+	 * and add those credits to the server structure.
+	 */
 
 	/*
 	 * Compounding is never used during session establish.
@@ -932,11 +955,6 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
 		}
 	}
 
-	for (i = 0; i < num_rqst; i++)
-		if (!cancelled_mid[i] && midQ[i]->resp_buf
-		    && (midQ[i]->mid_state == MID_RESPONSE_RECEIVED))
-			credits[i] = ses->server->ops->get_credits(midQ[i]);
-
 	for (i = 0; i < num_rqst; i++) {
 		if (rc < 0)
 			goto out;
@@ -995,7 +1013,6 @@ out:
 	for (i = 0; i < num_rqst; i++) {
 		if (!cancelled_mid[i])
 			cifs_delete_mid(midQ[i]);
-		add_credits(ses->server, credits[i], optype);
 	}
 
 	return rc;
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 41/42] CIFS: Fix error paths in writeback code
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (38 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 40/42] CIFS: Move credit processing to mid callbacks for SMB3 Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 42/42] kvm: sev: Fail KVM_SEV_INIT if already initialized Sasha Levin
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: Pavel Shilovsky, Steve French, Sasha Levin, linux-cifs

From: Pavel Shilovsky <pshilov@microsoft.com>

[ Upstream commit 9a66396f1857cc1de06f4f4771797315e1a4ea56 ]

This patch aims to address writeback code problems related to error
paths. In particular it respects EINTR and related error codes and
stores and returns the first error occurred during writeback.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/cifsglob.h | 19 +++++++++++++++++++
 fs/cifs/cifssmb.c  |  7 ++++---
 fs/cifs/file.c     | 29 +++++++++++++++++++++++------
 fs/cifs/inode.c    | 10 ++++++++++
 4 files changed, 56 insertions(+), 9 deletions(-)

diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 7a4fae0dc566..373639199291 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -1563,6 +1563,25 @@ static inline void free_dfs_info_array(struct dfs_info3_param *param,
 	kfree(param);
 }
 
+static inline bool is_interrupt_error(int error)
+{
+	switch (error) {
+	case -EINTR:
+	case -ERESTARTSYS:
+	case -ERESTARTNOHAND:
+	case -ERESTARTNOINTR:
+		return true;
+	}
+	return false;
+}
+
+static inline bool is_retryable_error(int error)
+{
+	if (is_interrupt_error(error) || error == -EAGAIN)
+		return true;
+	return false;
+}
+
 #define   MID_FREE 0
 #define   MID_REQUEST_ALLOCATED 1
 #define   MID_REQUEST_SUBMITTED 2
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index fce610f6cd24..327a101f7894 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2043,7 +2043,7 @@ cifs_writev_requeue(struct cifs_writedata *wdata)
 
 		for (j = 0; j < nr_pages; j++) {
 			unlock_page(wdata2->pages[j]);
-			if (rc != 0 && rc != -EAGAIN) {
+			if (rc != 0 && !is_retryable_error(rc)) {
 				SetPageError(wdata2->pages[j]);
 				end_page_writeback(wdata2->pages[j]);
 				put_page(wdata2->pages[j]);
@@ -2052,7 +2052,7 @@ cifs_writev_requeue(struct cifs_writedata *wdata)
 
 		if (rc) {
 			kref_put(&wdata2->refcount, cifs_writedata_release);
-			if (rc == -EAGAIN)
+			if (is_retryable_error(rc))
 				continue;
 			break;
 		}
@@ -2061,7 +2061,8 @@ cifs_writev_requeue(struct cifs_writedata *wdata)
 		i += nr_pages;
 	} while (i < wdata->nr_pages);
 
-	mapping_set_error(inode->i_mapping, rc);
+	if (rc != 0 && !is_retryable_error(rc))
+		mapping_set_error(inode->i_mapping, rc);
 	kref_put(&wdata->refcount, cifs_writedata_release);
 }
 
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 116f8af0384f..c13effbaadba 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -732,7 +732,8 @@ reopen_success:
 
 	if (can_flush) {
 		rc = filemap_write_and_wait(inode->i_mapping);
-		mapping_set_error(inode->i_mapping, rc);
+		if (!is_interrupt_error(rc))
+			mapping_set_error(inode->i_mapping, rc);
 
 		if (tcon->unix_ext)
 			rc = cifs_get_inode_info_unix(&inode, full_path,
@@ -2117,6 +2118,7 @@ static int cifs_writepages(struct address_space *mapping,
 	pgoff_t end, index;
 	struct cifs_writedata *wdata;
 	int rc = 0;
+	int saved_rc = 0;
 	unsigned int xid;
 
 	/*
@@ -2145,8 +2147,10 @@ retry:
 
 		rc = server->ops->wait_mtu_credits(server, cifs_sb->wsize,
 						   &wsize, &credits);
-		if (rc)
+		if (rc != 0) {
+			done = true;
 			break;
+		}
 
 		tofind = min((wsize / PAGE_SIZE) - 1, end - index) + 1;
 
@@ -2154,6 +2158,7 @@ retry:
 						  &found_pages);
 		if (!wdata) {
 			rc = -ENOMEM;
+			done = true;
 			add_credits_and_wake_if(server, credits, 0);
 			break;
 		}
@@ -2182,7 +2187,7 @@ retry:
 		if (rc != 0) {
 			add_credits_and_wake_if(server, wdata->credits, 0);
 			for (i = 0; i < nr_pages; ++i) {
-				if (rc == -EAGAIN)
+				if (is_retryable_error(rc))
 					redirty_page_for_writepage(wbc,
 							   wdata->pages[i]);
 				else
@@ -2190,7 +2195,7 @@ retry:
 				end_page_writeback(wdata->pages[i]);
 				put_page(wdata->pages[i]);
 			}
-			if (rc != -EAGAIN)
+			if (!is_retryable_error(rc))
 				mapping_set_error(mapping, rc);
 		}
 		kref_put(&wdata->refcount, cifs_writedata_release);
@@ -2200,6 +2205,15 @@ retry:
 			continue;
 		}
 
+		/* Return immediately if we received a signal during writing */
+		if (is_interrupt_error(rc)) {
+			done = true;
+			break;
+		}
+
+		if (rc != 0 && saved_rc == 0)
+			saved_rc = rc;
+
 		wbc->nr_to_write -= nr_pages;
 		if (wbc->nr_to_write <= 0)
 			done = true;
@@ -2217,6 +2231,9 @@ retry:
 		goto retry;
 	}
 
+	if (saved_rc != 0)
+		rc = saved_rc;
+
 	if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
 		mapping->writeback_index = index;
 
@@ -2249,8 +2266,8 @@ cifs_writepage_locked(struct page *page, struct writeback_control *wbc)
 	set_page_writeback(page);
 retry_write:
 	rc = cifs_partialpagewrite(page, 0, PAGE_SIZE);
-	if (rc == -EAGAIN) {
-		if (wbc->sync_mode == WB_SYNC_ALL)
+	if (is_retryable_error(rc)) {
+		if (wbc->sync_mode == WB_SYNC_ALL && rc == -EAGAIN)
 			goto retry_write;
 		redirty_page_for_writepage(wbc, page);
 	} else if (rc != 0) {
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index a81a9df997c1..84d51ca91ef7 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -2261,6 +2261,11 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs)
 	 * the flush returns error?
 	 */
 	rc = filemap_write_and_wait(inode->i_mapping);
+	if (is_interrupt_error(rc)) {
+		rc = -ERESTARTSYS;
+		goto out;
+	}
+
 	mapping_set_error(inode->i_mapping, rc);
 	rc = 0;
 
@@ -2404,6 +2409,11 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs)
 	 * the flush returns error?
 	 */
 	rc = filemap_write_and_wait(inode->i_mapping);
+	if (is_interrupt_error(rc)) {
+		rc = -ERESTARTSYS;
+		goto cifs_setattr_exit;
+	}
+
 	mapping_set_error(inode->i_mapping, rc);
 	rc = 0;
 
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* [PATCH AUTOSEL 4.20 42/42] kvm: sev: Fail KVM_SEV_INIT if already initialized
  2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
                   ` (39 preceding siblings ...)
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 41/42] CIFS: Fix error paths in writeback code Sasha Levin
@ 2019-02-09 18:47 ` Sasha Levin
  40 siblings, 0 replies; 43+ messages in thread
From: Sasha Levin @ 2019-02-09 18:47 UTC (permalink / raw)
  To: linux-kernel, stable
  Cc: David Rientjes, Radim Krčmář, Sasha Levin, kvm

From: David Rientjes <rientjes@google.com>

[ Upstream commit 3f14a89d1132dcae3c8ce6721c6ef51f6e6d9b5f ]

By code inspection, it was found that multiple calls to KVM_SEV_INIT
could deplete asid bits and overwrite kvm_sev_info's regions_list.

Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this
should likely be fixed anyway.

This code is serialized by kvm->lock.

Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/svm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 101f53ccf571..3db60e0a59fd 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -6248,6 +6248,9 @@ static int sev_guest_init(struct kvm *kvm, struct kvm_sev_cmd *argp)
 	int asid, ret;
 
 	ret = -EBUSY;
+	if (unlikely(sev->active))
+		return ret;
+
 	asid = sev_asid_new();
 	if (asid < 0)
 		return ret;
-- 
2.19.1


^ permalink raw reply related	[flat|nested] 43+ messages in thread

* RE: [PATCH AUTOSEL 4.20 40/42] CIFS: Move credit processing to mid callbacks for SMB3
  2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 40/42] CIFS: Move credit processing to mid callbacks for SMB3 Sasha Levin
@ 2019-02-12  1:48   ` Pavel Shilovskiy
  0 siblings, 0 replies; 43+ messages in thread
From: Pavel Shilovskiy @ 2019-02-12  1:48 UTC (permalink / raw)
  To: Sasha Levin, linux-kernel, stable; +Cc: Steven French, linux-cifs


Sat, Feb 9 2019, 10:56AM, Sasha Levin <sashal@kernel.org> wrote:
>
> From: Pavel Shilovsky <pshilov@microsoft.com>
>
> [ Upstream commit ee258d79159afed52ca9372aeb9c1a51e89b32ee ]
>
> Currently we account for credits in the thread initiating a request
> and waiting for a response. The demultiplex thread receives the response,
> wakes up the thread and the latter collects credits from the response
> buffer and add them to the server structure on the client. This approach
> is not accurate, because it may race with reconnect events in the
> demultiplex thread which resets the number of credits.
>
> Fix this by moving credit processing to new mid callbacks that collect
> credits granted by the server from the response in the demultiplex thread.
>
> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
> Signed-off-by: Steve French <stfrench@microsoft.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  fs/cifs/transport.c | 51 ++++++++++++++++++++++++++++++---------------
>  1 file changed, 34 insertions(+), 17 deletions(-)
>
> diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
> index 4dbf62bb51b2..0dab276eced8 100644
> --- a/fs/cifs/transport.c
> +++ b/fs/cifs/transport.c
> @@ -781,12 +781,7 @@ cifs_setup_request(struct cifs_ses *ses, struct smb_rqst *rqst)
>  }
>
>  static void
> -cifs_noop_callback(struct mid_q_entry *mid)
> -{
> -}
> -
> -static void
> -cifs_cancelled_callback(struct mid_q_entry *mid)
> +cifs_compound_callback(struct mid_q_entry *mid)
>  {
>         struct TCP_Server_Info *server = mid->server;
>         unsigned int optype = mid->optype;
> @@ -799,10 +794,23 @@ cifs_cancelled_callback(struct mid_q_entry *mid)
>                         cifs_dbg(FYI, "Bad state for cancelled MID\n");
>         }
>
> -       DeleteMidQEntry(mid);
>         add_credits(server, credits_received, optype);
>  }
>
> +static void
> +cifs_compound_last_callback(struct mid_q_entry *mid)
> +{
> +       cifs_compound_callback(mid);
> +       cifs_wake_up_task(mid);
> +}
> +
> +static void
> +cifs_cancelled_callback(struct mid_q_entry *mid)
> +{
> +       cifs_compound_callback(mid);
> +       DeleteMidQEntry(mid);
> +}
> +
>  int
>  compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
>                    const int flags, const int num_rqst, struct smb_rqst *rqst,
> @@ -880,11 +888,14 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
>                 midQ[i]->mid_state = MID_REQUEST_SUBMITTED;
>                 midQ[i]->optype = optype;
>                 /*
> -                * We don't invoke the callback compounds unless it is the last
> -                * request.
> +                * Invoke callback for every part of the compound chain
> +                * to calculate credits properly. Wake up this thread only when
> +                * the last element is received.
>                  */
>                 if (i < num_rqst - 1)
> -                       midQ[i]->callback = cifs_noop_callback;
> +                       midQ[i]->callback = cifs_compound_callback;
> +               else
> +                       midQ[i]->callback = cifs_compound_last_callback;
>         }
>         cifs_in_send_inc(ses->server);
>         rc = smb_send_rqst(ses->server, num_rqst, rqst, flags);
> @@ -898,8 +909,20 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
>
>         mutex_unlock(&ses->server->srv_mutex);
>
> -       if (rc < 0)
> +       if (rc < 0) {
> +               /* Sending failed for some reason - return credits back */
> +               for (i = 0; i < num_rqst; i++)
> +                       add_credits(ses->server, credits[i], optype);
>                 goto out;
> +       }
> +
> +       /*
> +        * At this point the request is passed to the network stack - we assume
> +        * that any credits taken from the server structure on the client have
> +        * been spent and we can't return them back. Once we receive responses
> +        * we will collect credits granted by the server in the mid callbacks
> +        * and add those credits to the server structure.
> +        */
>
>         /*
>          * Compounding is never used during session establish.
> @@ -932,11 +955,6 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
>                 }
>         }
>
> -       for (i = 0; i < num_rqst; i++)
> -               if (!cancelled_mid[i] && midQ[i]->resp_buf
> -                   && (midQ[i]->mid_state == MID_RESPONSE_RECEIVED))
> -                       credits[i] = ses->server->ops->get_credits(midQ[i]);
> -
>         for (i = 0; i < num_rqst; i++) {
>                 if (rc < 0)
>                         goto out;
> @@ -995,7 +1013,6 @@ out:
>         for (i = 0; i < num_rqst; i++) {
>                 if (!cancelled_mid[i])
>                         cifs_delete_mid(midQ[i]);
> -               add_credits(ses->server, credits[i], optype);
>         }
>
>         return rc;
> --
> 2.19.1
>

Please apply the following two patches too:

https://patchwork.ozlabs.org/patch/1030180/
https://patchwork.ozlabs.org/patch/1030181/

The 1st fixes some minor regressions introduces by the proposing patch and the 2nd adds the same logic to processing of async responses as the proposing patch is doing for sync ones.

--
Best regards,
Pavel Shilovsky

^ permalink raw reply	[flat|nested] 43+ messages in thread

end of thread, other threads:[~2019-02-12  1:48 UTC | newest]

Thread overview: 43+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-09 18:46 [PATCH AUTOSEL 4.20 01/42] drm/amdgpu/sriov:Correct pfvf exchange logic Sasha Levin
2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 02/42] ACPI: NUMA: Use correct type for printing addresses on i386-PAE Sasha Levin
2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 03/42] perf stat: Fix endless wait for child process Sasha Levin
2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 04/42] perf report: Fix wrong iteration count in --branch-history Sasha Levin
2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 05/42] perf test shell: Use a fallback to get the pathname in vfs_getname Sasha Levin
2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 06/42] soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B} Sasha Levin
2019-02-09 18:46 ` [PATCH AUTOSEL 4.20 07/42] tools uapi: fix RISC-V 64-bit support Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 08/42] riscv: fix trace_sys_exit hook Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 09/42] cpufreq: check if policy is inactive early in __cpufreq_get() Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 10/42] csky: fixup relocation error with 807 & 860 Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 11/42] csky: fixup CACHEV1 store instruction fast retire Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 12/42] csky: fixup compile error with pte_alloc Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 13/42] irqchip/csky: fixup handle_irq_perbit break irq Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 14/42] drm/amd/powerplay: avoid possible buffer overflow Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 15/42] drm/bridge: tc358767: add bus flags Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 16/42] drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 17/42] drm/bridge: tc358767: fix single lane configuration Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 18/42] drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 19/42] drm/bridge: tc358767: reject modes which require too much BW Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 20/42] drm/bridge: tc358767: fix output H/V syncs Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 21/42] nvme-pci: use the same attributes when freeing host_mem_desc_bufs Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 22/42] nvme-pci: fix out of bounds access in nvme_cqe_pending Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 23/42] nvme-multipath: zero out ANA log buffer Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 24/42] nvme: pad fake subsys NQN vid and ssvid with zeros Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 25/42] nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 26/42] drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20 Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 27/42] drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 28/42] drm/amdgpu: disable system memory page tables for now Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 29/42] ARM: dts: da850-evm: Correct the audio codec regulators Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 30/42] ARM: dts: da850-evm: Correct the sound card name Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 31/42] ARM: dts: da850-lcdk: Correct the audio codec regulators Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 32/42] ARM: dts: da850-lcdk: Correct the sound card name Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 33/42] ARM: dts: kirkwood: Fix polarity of GPIO fan lines Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 34/42] csky: fixup compile error with CPU 810 Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 35/42] gpio: pl061: handle failed allocations Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 36/42] drm/nouveau: Don't disable polling in fallback mode Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 37/42] drm/nouveau/falcon: avoid touching registers if engine is off Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 38/42] cifs: Limit memory used by lock request calls to a page Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 39/42] CIFS: Fix credits calculation for cancelled requests Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 40/42] CIFS: Move credit processing to mid callbacks for SMB3 Sasha Levin
2019-02-12  1:48   ` Pavel Shilovskiy
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 41/42] CIFS: Fix error paths in writeback code Sasha Levin
2019-02-09 18:47 ` [PATCH AUTOSEL 4.20 42/42] kvm: sev: Fail KVM_SEV_INIT if already initialized Sasha Levin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).