LKML Archive on lore.kernel.org
 help / Atom feed
* [PATCH v5 0/5] i2c:ocores: improvements
@ 2019-02-11 16:05 Federico Vaga
  2019-02-11 16:05 ` [PATCH v5 1/5] i2c:ocores: stop transfer on timeout Federico Vaga
                   ` (4 more replies)
  0 siblings, 5 replies; 9+ messages in thread
From: Federico Vaga @ 2019-02-11 16:05 UTC (permalink / raw)
  To: Peter Korsgaard, Andrew Lunn; +Cc: linux-i2c, linux-kernel

This patch set provides improvements to the i2c-ocore driver.

[V4 -> V5]
- deterministic status of IEN bit in register "CONTROL" at the end of
  ocores_init()
- more style fixes

[V3 -> V4]
- add reviews-by/tested-by
- add comment to justify the formula in
    udelay((8 * 1000) / i2c->bus_clock_khz);

[V2 -> V3]
- fix particular error condition on platform_get_irq(). Copied from
  https://patchwork.ozlabs.org/patch/1038409/

[V1 -> V2]
- replaced usleep_range() with udelay() so that the polling version can be
  used in atomic context.
- added dedicated patch for minor style issues
- fixed delay computation
- use spin_lock_irqsave(), instead of spin_trylock_irqsave(). IACK is always
  necessary and a trylock would generate an extra interrupt for nothing
- make the driver ready for an eventual master_xfer_irqless()


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 1/5] i2c:ocores: stop transfer on timeout
  2019-02-11 16:05 [PATCH v5 0/5] i2c:ocores: improvements Federico Vaga
@ 2019-02-11 16:05 ` Federico Vaga
  2019-02-11 16:05 ` [PATCH v5 2/5] i2c:ocores: do not handle IRQ if IF is not set Federico Vaga
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 9+ messages in thread
From: Federico Vaga @ 2019-02-11 16:05 UTC (permalink / raw)
  To: Peter Korsgaard, Andrew Lunn; +Cc: linux-i2c, linux-kernel, Federico Vaga

Detecting a timeout is ok, but we also need to assert a STOP command on
the bus in order to prevent it from generating interrupts when there are
no on going transfers.

Example: very long transmission.

1. ocores_xfer: START a transfer
2. ocores_isr : handle byte by byte the transfer
3. ocores_xfer: goes in timeout [[bugfix here]]
4. ocores_xfer: return to I2C subsystem and to the I2C driver
5. I2C driver : it may clean up the i2c_msg memory
6. ocores_isr : receives another interrupt (pending bytes to be
                transferred) but the i2c_msg memory is invalid now

So, since the transfer was too long, we have to detect the timeout and
STOP the transfer.

Another point is that we have a critical region here. When handling the
timeout condition we may have a running IRQ handler. For this reason I
introduce a spinlock.

In order to make easier to understan locking I have:
- added a new function to handle timeout
- modified the current ocores_process() function in order to be protected
  by the new spinlock
Like this it is obvious at first sight that this locking serializes
the execution of ocores_process() and ocores_process_timeout()

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
---
 drivers/i2c/busses/i2c-ocores.c | 54 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 45 insertions(+), 9 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 87f9caa..aa85202 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -25,7 +25,12 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/log2.h>
+#include <linux/spinlock.h>
 
+/**
+ * @process_lock: protect I2C transfer process.
+ *     ocores_process() and ocores_process_timeout() can't run in parallel.
+ */
 struct ocores_i2c {
 	void __iomem *base;
 	u32 reg_shift;
@@ -36,6 +41,7 @@ struct ocores_i2c {
 	int pos;
 	int nmsgs;
 	int state; /* see STATE_ */
+	spinlock_t process_lock;
 	struct clk *clk;
 	int ip_clock_khz;
 	int bus_clock_khz;
@@ -141,19 +147,26 @@ static void ocores_process(struct ocores_i2c *i2c)
 {
 	struct i2c_msg *msg = i2c->msg;
 	u8 stat = oc_getreg(i2c, OCI2C_STATUS);
+	unsigned long flags;
+
+	/*
+	 * If we spin here is because we are in timeout, so we are going
+	 * to be in STATE_ERROR. See ocores_process_timeout()
+	 */
+	spin_lock_irqsave(&i2c->process_lock, flags);
 
 	if ((i2c->state == STATE_DONE) || (i2c->state == STATE_ERROR)) {
 		/* stop has been sent */
 		oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
 		wake_up(&i2c->wait);
-		return;
+		goto out;
 	}
 
 	/* error? */
 	if (stat & OCI2C_STAT_ARBLOST) {
 		i2c->state = STATE_ERROR;
 		oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
-		return;
+		goto out;
 	}
 
 	if ((i2c->state == STATE_START) || (i2c->state == STATE_WRITE)) {
@@ -163,7 +176,7 @@ static void ocores_process(struct ocores_i2c *i2c)
 		if (stat & OCI2C_STAT_NACK) {
 			i2c->state = STATE_ERROR;
 			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
-			return;
+			goto out;
 		}
 	} else
 		msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA);
@@ -184,14 +197,14 @@ static void ocores_process(struct ocores_i2c *i2c)
 
 				oc_setreg(i2c, OCI2C_DATA, addr);
 				oc_setreg(i2c, OCI2C_CMD,  OCI2C_CMD_START);
-				return;
+				goto out;
 			} else
 				i2c->state = (msg->flags & I2C_M_RD)
 					? STATE_READ : STATE_WRITE;
 		} else {
 			i2c->state = STATE_DONE;
 			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
-			return;
+			goto out;
 		}
 	}
 
@@ -202,6 +215,9 @@ static void ocores_process(struct ocores_i2c *i2c)
 		oc_setreg(i2c, OCI2C_DATA, msg->buf[i2c->pos++]);
 		oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_WRITE);
 	}
+
+out:
+	spin_unlock_irqrestore(&i2c->process_lock, flags);
 }
 
 static irqreturn_t ocores_isr(int irq, void *dev_id)
@@ -213,9 +229,24 @@ static irqreturn_t ocores_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/**
+ * Process timeout event
+ * @i2c: ocores I2C device instance
+ */
+static void ocores_process_timeout(struct ocores_i2c *i2c)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i2c->process_lock, flags);
+	i2c->state = STATE_ERROR;
+	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
+	spin_unlock_irqrestore(&i2c->process_lock, flags);
+}
+
 static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 {
 	struct ocores_i2c *i2c = i2c_get_adapdata(adap);
+	int ret;
 
 	i2c->msg = msgs;
 	i2c->pos = 0;
@@ -225,11 +256,14 @@ static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	oc_setreg(i2c, OCI2C_DATA, i2c_8bit_addr_from_msg(i2c->msg));
 	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
 
-	if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
-			       (i2c->state == STATE_DONE), HZ))
-		return (i2c->state == STATE_DONE) ? num : -EIO;
-	else
+	ret = wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
+				 (i2c->state == STATE_DONE), HZ);
+	if (ret == 0) {
+		ocores_process_timeout(i2c);
 		return -ETIMEDOUT;
+	}
+
+	return (i2c->state == STATE_DONE) ? num : -EIO;
 }
 
 static int ocores_init(struct device *dev, struct ocores_i2c *i2c)
@@ -422,6 +456,8 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
+	spin_lock_init(&i2c->process_lock);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	i2c->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(i2c->base))
-- 
2.15.0


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 2/5] i2c:ocores: do not handle IRQ if IF is not set
  2019-02-11 16:05 [PATCH v5 0/5] i2c:ocores: improvements Federico Vaga
  2019-02-11 16:05 ` [PATCH v5 1/5] i2c:ocores: stop transfer on timeout Federico Vaga
@ 2019-02-11 16:05 ` Federico Vaga
  2019-02-11 16:05 ` [PATCH v5 3/5] i2c:ocores: add polling interface Federico Vaga
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 9+ messages in thread
From: Federico Vaga @ 2019-02-11 16:05 UTC (permalink / raw)
  To: Peter Korsgaard, Andrew Lunn; +Cc: linux-i2c, linux-kernel, Federico Vaga

If the Interrupt Flag (IF) is not set, we should not handle the IRQ:
- the line can be shared with other devices
- it can be a spurious interrupt

To avoid reading twice the status register, the ocores_process() function
expects it to be read by the caller.

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
---
 drivers/i2c/busses/i2c-ocores.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index aa85202..fcc2558 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -143,10 +143,9 @@ static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg)
 	return i2c->getreg(i2c, reg);
 }
 
-static void ocores_process(struct ocores_i2c *i2c)
+static void ocores_process(struct ocores_i2c *i2c, u8 stat)
 {
 	struct i2c_msg *msg = i2c->msg;
-	u8 stat = oc_getreg(i2c, OCI2C_STATUS);
 	unsigned long flags;
 
 	/*
@@ -223,8 +222,12 @@ out:
 static irqreturn_t ocores_isr(int irq, void *dev_id)
 {
 	struct ocores_i2c *i2c = dev_id;
+	u8 stat = oc_getreg(i2c, OCI2C_STATUS);
+
+	if (!(stat & OCI2C_STAT_IF))
+		return IRQ_NONE;
 
-	ocores_process(i2c);
+	ocores_process(i2c, stat);
 
 	return IRQ_HANDLED;
 }
-- 
2.15.0


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 3/5] i2c:ocores: add polling interface
  2019-02-11 16:05 [PATCH v5 0/5] i2c:ocores: improvements Federico Vaga
  2019-02-11 16:05 ` [PATCH v5 1/5] i2c:ocores: stop transfer on timeout Federico Vaga
  2019-02-11 16:05 ` [PATCH v5 2/5] i2c:ocores: do not handle IRQ if IF is not set Federico Vaga
@ 2019-02-11 16:05 ` Federico Vaga
  2019-02-11 16:05 ` [PATCH v5 4/5] i2c:ocores: add SPDX tag Federico Vaga
  2019-02-11 16:05 ` [PATCH v5 5/5] i2c:ocores: checkpatch fixes Federico Vaga
  4 siblings, 0 replies; 9+ messages in thread
From: Federico Vaga @ 2019-02-11 16:05 UTC (permalink / raw)
  To: Peter Korsgaard, Andrew Lunn; +Cc: linux-i2c, linux-kernel, Federico Vaga

This driver assumes that an interrupt line is always available for
the I2C master. This is not always the case and this patch adds support
for a polling version.

Report from Andrew Lunn:

  I did some timing tests for this. On my box, we request a udelay of
  80uS. The kernel actually delays for about 79uS. We then spin in
  ocores_wait() for an additional 10-11uS, which is 3 to 4 iterations.

  There are actually 9 bits on the wire, not 8, since there is an
  ACK/NACK bit after the actual data transfer. So i changed the delay to
  (9 * 1000) / i2c->bus_clock_khz. That resulted in ocores_wait() mostly
  not looping at all. But for reading an 4K AT24 EEPROM, it increased
  the read time by 10ms, from 424ms to 434ms. So we should probably keep
  with 8.

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/i2c/busses/i2c-ocores.c | 182 +++++++++++++++++++++++++++++++++++-----
 1 file changed, 161 insertions(+), 21 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index fcc2558..5dea7b9 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -26,6 +27,9 @@
 #include <linux/io.h>
 #include <linux/log2.h>
 #include <linux/spinlock.h>
+#include <linux/jiffies.h>
+
+#define OCORES_FLAG_POLL BIT(0)
 
 /**
  * @process_lock: protect I2C transfer process.
@@ -35,6 +39,7 @@ struct ocores_i2c {
 	void __iomem *base;
 	u32 reg_shift;
 	u32 reg_io_width;
+	unsigned long flags;
 	wait_queue_head_t wait;
 	struct i2c_adapter adap;
 	struct i2c_msg *msg;
@@ -246,10 +251,116 @@ static void ocores_process_timeout(struct ocores_i2c *i2c)
 	spin_unlock_irqrestore(&i2c->process_lock, flags);
 }
 
-static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+/**
+ * Wait until something change in a given register
+ * @i2c: ocores I2C device instance
+ * @reg: register to query
+ * @mask: bitmask to apply on register value
+ * @val: expected result
+ * @timeout: timeout in jiffies
+ *
+ * Timeout is necessary to avoid to stay here forever when the chip
+ * does not answer correctly.
+ *
+ * Return: 0 on success, -ETIMEDOUT on timeout
+ */
+static int ocores_wait(struct ocores_i2c *i2c,
+		       int reg, u8 mask, u8 val,
+		       const unsigned long timeout)
+{
+	unsigned long j;
+
+	j = jiffies + timeout;
+	while (1) {
+		u8 status = oc_getreg(i2c, reg);
+
+		if ((status & mask) == val)
+			break;
+
+		if (time_after(jiffies, j))
+			return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+/**
+ * Wait until is possible to process some data
+ * @i2c: ocores I2C device instance
+ *
+ * Used when the device is in polling mode (interrupts disabled).
+ *
+ * Return: 0 on success, -ETIMEDOUT on timeout
+ */
+static int ocores_poll_wait(struct ocores_i2c *i2c)
+{
+	u8 mask;
+	int err;
+
+	if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) {
+		/* transfer is over */
+		mask = OCI2C_STAT_BUSY;
+	} else {
+		/* on going transfer */
+		mask = OCI2C_STAT_TIP;
+		/*
+		 * We wait for the data to be transferred (8bit),
+		 * then we start polling on the ACK/NACK bit
+		 */
+		udelay((8 * 1000) / i2c->bus_clock_khz);
+	}
+
+	/*
+	 * once we are here we expect to get the expected result immediately
+	 * so if after 1ms we timeout then something is broken.
+	 */
+	err = ocores_wait(i2c, OCI2C_STATUS, mask, 0, msecs_to_jiffies(1));
+	if (err)
+		dev_warn(i2c->adap.dev.parent,
+			 "%s: STATUS timeout, bit 0x%x did not clear in 1ms\n",
+			 __func__, mask);
+	return err;
+}
+
+/**
+ * It handles an IRQ-less transfer
+ * @i2c: ocores I2C device instance
+ *
+ * Even if IRQ are disabled, the I2C OpenCore IP behavior is exactly the same
+ * (only that IRQ are not produced). This means that we can re-use entirely
+ * ocores_isr(), we just add our polling code around it.
+ *
+ * It can run in atomic context
+ */
+static void ocores_process_polling(struct ocores_i2c *i2c)
+{
+	while (1) {
+		irqreturn_t ret;
+		int err;
+
+		err = ocores_poll_wait(i2c);
+		if (err) {
+			i2c->state = STATE_ERROR;
+			break; /* timeout */
+		}
+
+		ret = ocores_isr(-1, i2c);
+		if (ret == IRQ_NONE)
+			break; /* all messages have been transferred */
+	}
+}
+
+static int ocores_xfer_core(struct ocores_i2c *i2c,
+			    struct i2c_msg *msgs, int num,
+			    bool polling)
 {
-	struct ocores_i2c *i2c = i2c_get_adapdata(adap);
 	int ret;
+	u8 ctrl;
+
+	ctrl = oc_getreg(i2c, OCI2C_CONTROL);
+	if (polling)
+		oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~OCI2C_CTRL_IEN);
+	else
+		oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN);
 
 	i2c->msg = msgs;
 	i2c->pos = 0;
@@ -259,16 +370,37 @@ static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	oc_setreg(i2c, OCI2C_DATA, i2c_8bit_addr_from_msg(i2c->msg));
 	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
 
-	ret = wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
-				 (i2c->state == STATE_DONE), HZ);
-	if (ret == 0) {
-		ocores_process_timeout(i2c);
-		return -ETIMEDOUT;
+	if (polling) {
+		ocores_process_polling(i2c);
+	} else {
+		ret = wait_event_timeout(i2c->wait,
+					 (i2c->state == STATE_ERROR) ||
+					 (i2c->state == STATE_DONE), HZ);
+		if (ret == 0) {
+			ocores_process_timeout(i2c);
+			return -ETIMEDOUT;
+		}
 	}
 
 	return (i2c->state == STATE_DONE) ? num : -EIO;
 }
 
+static int ocores_xfer_polling(struct i2c_adapter *adap,
+			       struct i2c_msg *msgs, int num)
+{
+	return ocores_xfer_core(i2c_get_adapdata(adap), msgs, num, true);
+}
+
+static int ocores_xfer(struct i2c_adapter *adap,
+		       struct i2c_msg *msgs, int num)
+{
+	struct ocores_i2c *i2c = i2c_get_adapdata(adap);
+
+	if (i2c->flags & OCORES_FLAG_POLL)
+		return ocores_xfer_polling(adap, msgs, num);
+	return ocores_xfer_core(i2c, msgs, num, false);
+}
+
 static int ocores_init(struct device *dev, struct ocores_i2c *i2c)
 {
 	int prescale;
@@ -276,7 +408,8 @@ static int ocores_init(struct device *dev, struct ocores_i2c *i2c)
 	u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
 
 	/* make sure the device is disabled */
-	oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
+	ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
+	oc_setreg(i2c, OCI2C_CONTROL, ctrl);
 
 	prescale = (i2c->ip_clock_khz / (5 * i2c->bus_clock_khz)) - 1;
 	prescale = clamp(prescale, 0, 0xffff);
@@ -294,7 +427,7 @@ static int ocores_init(struct device *dev, struct ocores_i2c *i2c)
 
 	/* Init the device */
 	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
-	oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN | OCI2C_CTRL_EN);
+	oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_EN);
 
 	return 0;
 }
@@ -451,10 +584,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 	int ret;
 	int i;
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
-
 	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
 	if (!i2c)
 		return -ENOMEM;
@@ -509,18 +638,29 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 		}
 	}
 
+	init_waitqueue_head(&i2c->wait);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq == -ENXIO) {
+		i2c->flags |= OCORES_FLAG_POLL;
+	} else {
+		if (irq < 0)
+			return irq;
+	}
+
+	if (!(i2c->flags & OCORES_FLAG_POLL)) {
+		ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0,
+				       pdev->name, i2c);
+		if (ret) {
+			dev_err(&pdev->dev, "Cannot claim IRQ\n");
+			goto err_clk;
+		}
+	}
+
 	ret = ocores_init(&pdev->dev, i2c);
 	if (ret)
 		goto err_clk;
 
-	init_waitqueue_head(&i2c->wait);
-	ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0,
-			       pdev->name, i2c);
-	if (ret) {
-		dev_err(&pdev->dev, "Cannot claim IRQ\n");
-		goto err_clk;
-	}
-
 	/* hook up driver to tree */
 	platform_set_drvdata(pdev, i2c);
 	i2c->adap = ocores_adapter;
-- 
2.15.0


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 4/5] i2c:ocores: add SPDX tag
  2019-02-11 16:05 [PATCH v5 0/5] i2c:ocores: improvements Federico Vaga
                   ` (2 preceding siblings ...)
  2019-02-11 16:05 ` [PATCH v5 3/5] i2c:ocores: add polling interface Federico Vaga
@ 2019-02-11 16:05 ` Federico Vaga
  2019-02-11 16:05 ` [PATCH v5 5/5] i2c:ocores: checkpatch fixes Federico Vaga
  4 siblings, 0 replies; 9+ messages in thread
From: Federico Vaga @ 2019-02-11 16:05 UTC (permalink / raw)
  To: Peter Korsgaard, Andrew Lunn; +Cc: linux-i2c, linux-kernel, Federico Vaga

It adds the SPDX tag and it removes the old text about the GPLv2.

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
---
 drivers/i2c/busses/i2c-ocores.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 5dea7b9..78085a8 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * i2c-ocores.c: I2C bus driver for OpenCores I2C controller
  * (https://opencores.org/project/i2c/overview)
@@ -6,10 +7,6 @@
  *
  * Support for the GRLIB port of the controller by
  * Andreas Larsson <andreas@gaisler.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <linux/clk.h>
-- 
2.15.0


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v5 5/5] i2c:ocores: checkpatch fixes
  2019-02-11 16:05 [PATCH v5 0/5] i2c:ocores: improvements Federico Vaga
                   ` (3 preceding siblings ...)
  2019-02-11 16:05 ` [PATCH v5 4/5] i2c:ocores: add SPDX tag Federico Vaga
@ 2019-02-11 16:05 ` Federico Vaga
  2019-02-11 16:12   ` Peter Rosin
  4 siblings, 1 reply; 9+ messages in thread
From: Federico Vaga @ 2019-02-11 16:05 UTC (permalink / raw)
  To: Peter Korsgaard, Andrew Lunn; +Cc: linux-i2c, linux-kernel, Federico Vaga

Miscellaneous style fixes from checkpatch

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
---
 drivers/i2c/busses/i2c-ocores.c | 30 +++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 11 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 78085a8..54b2156 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -179,8 +179,9 @@ static void ocores_process(struct ocores_i2c *i2c, u8 stat)
 			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
 			goto out;
 		}
-	} else
+	} else {
 		msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA);
+	}
 
 	/* end of msg? */
 	if (i2c->pos == msg->len) {
@@ -197,11 +198,11 @@ static void ocores_process(struct ocores_i2c *i2c, u8 stat)
 				i2c->state = STATE_START;
 
 				oc_setreg(i2c, OCI2C_DATA, addr);
-				oc_setreg(i2c, OCI2C_CMD,  OCI2C_CMD_START);
+				oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
 				goto out;
-			} else
-				i2c->state = (msg->flags & I2C_M_RD)
-					? STATE_READ : STATE_WRITE;
+			}
+			i2c->state = (msg->flags & I2C_M_RD)
+				? STATE_READ : STATE_WRITE;
 		} else {
 			i2c->state = STATE_DONE;
 			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
@@ -461,13 +462,16 @@ static const struct of_device_id ocores_i2c_match[] = {
 MODULE_DEVICE_TABLE(of, ocores_i2c_match);
 
 #ifdef CONFIG_OF
-/* Read and write functions for the GRLIB port of the controller. Registers are
+/*
+ * Read and write functions for the GRLIB port of the controller. Registers are
  * 32-bit big endian and the PRELOW and PREHIGH registers are merged into one
- * register. The subsequent registers has their offset decreased accordingly. */
+ * register. The subsequent registers have their offsets decreased accordingly.
+ */
 static u8 oc_getreg_grlib(struct ocores_i2c *i2c, int reg)
 {
 	u32 rd;
 	int rreg = reg;
+
 	if (reg != OCI2C_PRELOW)
 		rreg--;
 	rd = ioread32be(i2c->base + (rreg << i2c->reg_shift));
@@ -481,6 +485,7 @@ static void oc_setreg_grlib(struct ocores_i2c *i2c, int reg, u8 value)
 {
 	u32 curr, wr;
 	int rreg = reg;
+
 	if (reg != OCI2C_PRELOW)
 		rreg--;
 	if (reg == OCI2C_PRELOW || reg == OCI2C_PREHIGH) {
@@ -569,7 +574,7 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
 	return 0;
 }
 #else
-#define ocores_i2c_of_probe(pdev,i2c) -ENODEV
+#define ocores_i2c_of_probe(pdev, i2c) -ENODEV
 #endif
 
 static int ocores_i2c_probe(struct platform_device *pdev)
@@ -686,10 +691,11 @@ err_clk:
 static int ocores_i2c_remove(struct platform_device *pdev)
 {
 	struct ocores_i2c *i2c = platform_get_drvdata(pdev);
+	u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
 
 	/* disable i2c logic */
-	oc_setreg(i2c, OCI2C_CONTROL, oc_getreg(i2c, OCI2C_CONTROL)
-		  & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
+	ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
+	oc_setreg(i2c, OCI2C_CONTROL, ctrl);
 
 	/* remove adapter & data */
 	i2c_del_adapter(&i2c->adap);
@@ -707,7 +713,9 @@ static int ocores_i2c_suspend(struct device *dev)
 	u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
 
 	/* make sure the device is disabled */
-	oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
+	ctrl = oc_getreg(i2c, OCI2C_CONTROL);
+	ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
+	oc_setreg(i2c, OCI2C_CONTROL, ctrl);
 
 	if (!IS_ERR(i2c->clk))
 		clk_disable_unprepare(i2c->clk);
-- 
2.15.0


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v5 5/5] i2c:ocores: checkpatch fixes
  2019-02-11 16:05 ` [PATCH v5 5/5] i2c:ocores: checkpatch fixes Federico Vaga
@ 2019-02-11 16:12   ` Peter Rosin
  2019-02-11 16:18     ` Federico Vaga
  2019-02-11 16:19     ` Wolfram Sang
  0 siblings, 2 replies; 9+ messages in thread
From: Peter Rosin @ 2019-02-11 16:12 UTC (permalink / raw)
  To: Federico Vaga, Peter Korsgaard, Andrew Lunn; +Cc: linux-i2c, linux-kernel

On 2019-02-11 17:05, Federico Vaga wrote:
> Miscellaneous style fixes from checkpatch
> 
> Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
> ---
>  drivers/i2c/busses/i2c-ocores.c | 30 +++++++++++++++++++-----------
>  1 file changed, 19 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
> index 78085a8..54b2156 100644
> --- a/drivers/i2c/busses/i2c-ocores.c
> +++ b/drivers/i2c/busses/i2c-ocores.c
> @@ -179,8 +179,9 @@ static void ocores_process(struct ocores_i2c *i2c, u8 stat)
>  			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
>  			goto out;
>  		}
> -	} else
> +	} else {
>  		msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA);
> +	}
>  
>  	/* end of msg? */
>  	if (i2c->pos == msg->len) {
> @@ -197,11 +198,11 @@ static void ocores_process(struct ocores_i2c *i2c, u8 stat)
>  				i2c->state = STATE_START;
>  
>  				oc_setreg(i2c, OCI2C_DATA, addr);
> -				oc_setreg(i2c, OCI2C_CMD,  OCI2C_CMD_START);
> +				oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
>  				goto out;
> -			} else
> -				i2c->state = (msg->flags & I2C_M_RD)
> -					? STATE_READ : STATE_WRITE;
> +			}
> +			i2c->state = (msg->flags & I2C_M_RD)
> +				? STATE_READ : STATE_WRITE;
>  		} else {
>  			i2c->state = STATE_DONE;
>  			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
> @@ -461,13 +462,16 @@ static const struct of_device_id ocores_i2c_match[] = {
>  MODULE_DEVICE_TABLE(of, ocores_i2c_match);
>  
>  #ifdef CONFIG_OF
> -/* Read and write functions for the GRLIB port of the controller. Registers are
> +/*
> + * Read and write functions for the GRLIB port of the controller. Registers are
>   * 32-bit big endian and the PRELOW and PREHIGH registers are merged into one
> - * register. The subsequent registers has their offset decreased accordingly. */
> + * register. The subsequent registers have their offsets decreased accordingly.
> + */
>  static u8 oc_getreg_grlib(struct ocores_i2c *i2c, int reg)
>  {
>  	u32 rd;
>  	int rreg = reg;
> +
>  	if (reg != OCI2C_PRELOW)
>  		rreg--;
>  	rd = ioread32be(i2c->base + (rreg << i2c->reg_shift));
> @@ -481,6 +485,7 @@ static void oc_setreg_grlib(struct ocores_i2c *i2c, int reg, u8 value)
>  {
>  	u32 curr, wr;
>  	int rreg = reg;
> +
>  	if (reg != OCI2C_PRELOW)
>  		rreg--;
>  	if (reg == OCI2C_PRELOW || reg == OCI2C_PREHIGH) {
> @@ -569,7 +574,7 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
>  	return 0;
>  }
>  #else
> -#define ocores_i2c_of_probe(pdev,i2c) -ENODEV
> +#define ocores_i2c_of_probe(pdev, i2c) -ENODEV
>  #endif
>  
>  static int ocores_i2c_probe(struct platform_device *pdev)
> @@ -686,10 +691,11 @@ err_clk:
>  static int ocores_i2c_remove(struct platform_device *pdev)
>  {
>  	struct ocores_i2c *i2c = platform_get_drvdata(pdev);
> +	u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
>  
>  	/* disable i2c logic */
> -	oc_setreg(i2c, OCI2C_CONTROL, oc_getreg(i2c, OCI2C_CONTROL)
> -		  & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
> +	ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
> +	oc_setreg(i2c, OCI2C_CONTROL, ctrl);
>  
>  	/* remove adapter & data */
>  	i2c_del_adapter(&i2c->adap);
> @@ -707,7 +713,9 @@ static int ocores_i2c_suspend(struct device *dev)
>  	u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
>  
>  	/* make sure the device is disabled */
> -	oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
> +	ctrl = oc_getreg(i2c, OCI2C_CONTROL);

There's a pointless double oc_getreg(i2c, OCI2C_CONTROL).

Cheers,
Peter

> +	ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
> +	oc_setreg(i2c, OCI2C_CONTROL, ctrl);
>  
>  	if (!IS_ERR(i2c->clk))
>  		clk_disable_unprepare(i2c->clk);
> 


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v5 5/5] i2c:ocores: checkpatch fixes
  2019-02-11 16:12   ` Peter Rosin
@ 2019-02-11 16:18     ` Federico Vaga
  2019-02-11 16:19     ` Wolfram Sang
  1 sibling, 0 replies; 9+ messages in thread
From: Federico Vaga @ 2019-02-11 16:18 UTC (permalink / raw)
  To: Peter Rosin; +Cc: Peter Korsgaard, Andrew Lunn, linux-i2c, linux-kernel

On Monday, February 11, 2019 5:12:23 PM CET Peter Rosin wrote:
> On 2019-02-11 17:05, Federico Vaga wrote:
> 
> > Miscellaneous style fixes from checkpatch
> > 
> > Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
> > ---
> > 
> >  drivers/i2c/busses/i2c-ocores.c | 30 +++++++++++++++++++-----------
> >  1 file changed, 19 insertions(+), 11 deletions(-)
> > 
> > 
> > diff --git a/drivers/i2c/busses/i2c-ocores.c
> > b/drivers/i2c/busses/i2c-ocores.c
 index 78085a8..54b2156 100644
> > --- a/drivers/i2c/busses/i2c-ocores.c
> > +++ b/drivers/i2c/busses/i2c-ocores.c
> > @@ -179,8 +179,9 @@ static void ocores_process(struct ocores_i2c *i2c, u8
> > stat)
> 
> >  			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
> >  			goto out;
> >  		
> >  		}
> > 
> > -	} else
> > +	} else {
> > 
> >  		msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA);
> > 
> > +	}
> > 
> >  
> >  
> >  	/* end of msg? */
> >  	if (i2c->pos == msg->len) {
> > 
> > @@ -197,11 +198,11 @@ static void ocores_process(struct ocores_i2c *i2c,
> > u8 stat)
> 
> >  				i2c->state = STATE_START;
> >  
> >  
> >  
> >  				oc_setreg(i2c, OCI2C_DATA, addr);
> > 
> > -				oc_setreg(i2c, OCI2C_CMD,  OCI2C_CMD_START);
> > +				oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
> > 
> >  				goto out;
> > 
> > -			} else
> > -				i2c->state = (msg->flags & I2C_M_RD)
> > -					? STATE_READ : STATE_WRITE;
> > +			}
> > +			i2c->state = (msg->flags & I2C_M_RD)
> > +				? STATE_READ : STATE_WRITE;
> > 
> >  		} else {
> >  		
> >  			i2c->state = STATE_DONE;
> >  			oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
> > 
> > @@ -461,13 +462,16 @@ static const struct of_device_id ocores_i2c_match[]
> > = {
> 
> >  MODULE_DEVICE_TABLE(of, ocores_i2c_match);
> >  
> >  #ifdef CONFIG_OF
> > 
> > -/* Read and write functions for the GRLIB port of the controller.
> > Registers are
 +/*
> > + * Read and write functions for the GRLIB port of the controller.
> > Registers are
> 
> >   * 32-bit big endian and the PRELOW and PREHIGH registers are merged into
> >   one
> 
> > - * register. The subsequent registers has their offset decreased
> > accordingly. */
 + * register. The subsequent registers have their
> > offsets decreased accordingly. + */
> > 
> >  static u8 oc_getreg_grlib(struct ocores_i2c *i2c, int reg)
> >  {
> >  
> >  	u32 rd;
> >  	int rreg = reg;
> > 
> > +
> > 
> >  	if (reg != OCI2C_PRELOW)
> >  	
> >  		rreg--;
> >  	
> >  	rd = ioread32be(i2c->base + (rreg << i2c->reg_shift));
> > 
> > @@ -481,6 +485,7 @@ static void oc_setreg_grlib(struct ocores_i2c *i2c,
> > int reg, u8 value)
> 
> >  {
> >  
> >  	u32 curr, wr;
> >  	int rreg = reg;
> > 
> > +
> > 
> >  	if (reg != OCI2C_PRELOW)
> >  	
> >  		rreg--;
> >  	
> >  	if (reg == OCI2C_PRELOW || reg == OCI2C_PREHIGH) {
> > 
> > @@ -569,7 +574,7 @@ static int ocores_i2c_of_probe(struct platform_device
> > *pdev,
> 
> >  	return 0;
> >  
> >  }
> >  #else
> > 
> > -#define ocores_i2c_of_probe(pdev,i2c) -ENODEV
> > +#define ocores_i2c_of_probe(pdev, i2c) -ENODEV
> > 
> >  #endif
> >  
> >  static int ocores_i2c_probe(struct platform_device *pdev)
> > 
> > @@ -686,10 +691,11 @@ err_clk:
> > 
> >  static int ocores_i2c_remove(struct platform_device *pdev)
> >  {
> >  
> >  	struct ocores_i2c *i2c = platform_get_drvdata(pdev);
> > 
> > +	u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
> > 
> >  
> >  
> >  	/* disable i2c logic */
> > 
> > -	oc_setreg(i2c, OCI2C_CONTROL, oc_getreg(i2c, OCI2C_CONTROL)
> > -		  & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
> > +	ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
> > +	oc_setreg(i2c, OCI2C_CONTROL, ctrl);
> > 
> >  
> >  
> >  	/* remove adapter & data */
> >  	i2c_del_adapter(&i2c->adap);
> > 
> > @@ -707,7 +713,9 @@ static int ocores_i2c_suspend(struct device *dev)
> > 
> >  	u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
> >  
> >  
> >  
> >  	/* make sure the device is disabled */
> > 
> > -	oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
> > +	ctrl = oc_getreg(i2c, OCI2C_CONTROL);
> 
> 
> There's a pointless double oc_getreg(i2c, OCI2C_CONTROL).

Very sorry for the waste of time for such a stupid copy&paste error.
V6 is coming.
 
> Cheers,
> Peter
> 
> 
> > +	ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
> > +	oc_setreg(i2c, OCI2C_CONTROL, ctrl);
> > 
> >  
> >  
> >  	if (!IS_ERR(i2c->clk))
> >  	
> >  		clk_disable_unprepare(i2c->clk);
> > 
> > 
> 
> 





^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v5 5/5] i2c:ocores: checkpatch fixes
  2019-02-11 16:12   ` Peter Rosin
  2019-02-11 16:18     ` Federico Vaga
@ 2019-02-11 16:19     ` Wolfram Sang
  1 sibling, 0 replies; 9+ messages in thread
From: Wolfram Sang @ 2019-02-11 16:19 UTC (permalink / raw)
  To: Peter Rosin
  Cc: Federico Vaga, Peter Korsgaard, Andrew Lunn, linux-i2c, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 291 bytes --]


> > -	oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
> > +	ctrl = oc_getreg(i2c, OCI2C_CONTROL);
> 
> There's a pointless double oc_getreg(i2c, OCI2C_CONTROL).

In case you need to resend, please update $subject of all patches to
have a space after "i2c:"


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-11 16:05 [PATCH v5 0/5] i2c:ocores: improvements Federico Vaga
2019-02-11 16:05 ` [PATCH v5 1/5] i2c:ocores: stop transfer on timeout Federico Vaga
2019-02-11 16:05 ` [PATCH v5 2/5] i2c:ocores: do not handle IRQ if IF is not set Federico Vaga
2019-02-11 16:05 ` [PATCH v5 3/5] i2c:ocores: add polling interface Federico Vaga
2019-02-11 16:05 ` [PATCH v5 4/5] i2c:ocores: add SPDX tag Federico Vaga
2019-02-11 16:05 ` [PATCH v5 5/5] i2c:ocores: checkpatch fixes Federico Vaga
2019-02-11 16:12   ` Peter Rosin
2019-02-11 16:18     ` Federico Vaga
2019-02-11 16:19     ` Wolfram Sang

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox