linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Zhang <markz@nvidia.com>
To: <lee.jones@linaro.org>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: <linux-tegra@vger.kernel.org>, Mark Zhang <markz@nvidia.com>
Subject: [PATCH v3 2/4] mfd: max77620: add documentation for backup battery charging
Date: Tue, 12 Feb 2019 14:43:51 +0800	[thread overview]
Message-ID: <20190212064353.7451-3-markz@nvidia.com> (raw)
In-Reply-To: <20190212064353.7451-1-markz@nvidia.com>

Adding documentation for 3 new backup battery charging dts
properties:
- maxim,charging-current-microamp
- maxim,charging-voltage-microvolt
- maxim,output-resister-ohms

Signed-off-by: Mark Zhang <markz@nvidia.com>
---
 .../devicetree/bindings/mfd/max77620.txt      | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt
index 9c16d51cc15b..88825eaf2567 100644
--- a/Documentation/devicetree/bindings/mfd/max77620.txt
+++ b/Documentation/devicetree/bindings/mfd/max77620.txt
@@ -122,6 +122,26 @@ For DT binding details of different sub modules like GPIO, pincontrol,
 regulator, power, please refer respective device-tree binding document
 under their respective sub-system directories.
 
+Backup Battery:
+==============
+This sub-node configure charging backup battery of the device. Device has
+support of charging the backup battery. The subnode name is "backup-battery".
+The property for backup-battery child nodes as:
+Presence of this child node will enable the backup battery charging.
+
+Optional properties:
+	-maxim,charging-current-microamp: Charging current setting.
+			The device supports 50/100/200/400/600/800uA.
+			If this property is unavailable then it will
+			charge with 50uA.
+	-maxim,charging-voltage-microvolt: Charging Voltage Limit Setting.
+			Device supports 2500000/3000000/3300000/350000uV.
+			Default will be set to 2500mV. The voltage will be roundoff
+			to nearest lower side if other than above is configured.
+	-maxim,output-resister-ohms: Output resistor on Ohm.
+			Device supports 100/1000/3000/6000 Ohms.
+			Default will be set to 1000 Ohm.
+
 Example:
 --------
 #include <dt-bindings/mfd/max77620.h>
-- 
2.19.2


  parent reply	other threads:[~2019-02-12  6:44 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-12  6:43 [PATCH v3 0/4] Add max77620 charging & low battery support Mark Zhang
2019-02-12  6:43 ` [PATCH v3 1/4] mfd: max77620: Add backup battery charger support Mark Zhang
2019-02-12  8:06   ` Lee Jones
2019-02-12  6:43 ` Mark Zhang [this message]
2019-02-18 18:06   ` [PATCH v3 2/4] mfd: max77620: add documentation for backup battery charging Rob Herring
2019-02-19  2:07     ` Mark Zhang
2019-02-19  2:09       ` Mark Zhang
2019-02-19 15:18       ` Rob Herring
2019-02-12  6:43 ` [PATCH v3 3/4] mfd: max77620: Add low battery monitor support Mark Zhang
2019-02-12  6:43 ` [PATCH v3 4/4] mfd: max77620: add documentation for low battery monitoring Mark Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190212064353.7451-3-markz@nvidia.com \
    --to=markz@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).