linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pankaj Bansal <pankaj.bansal@nxp.com>
To: Leo Li <leoyang.li@nxp.com>, Peter Rosin <peda@axentia.se>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Pankaj Bansal <pankaj.bansal@nxp.com>
Subject: [PATCH v2] drivers: mux: Add Generic regmap bitfield-based multiplexer in mmio-mux
Date: Thu, 21 Feb 2019 12:48:10 +0000	[thread overview]
Message-ID: <20190221181230.4892-1-pankaj.bansal@nxp.com> (raw)

Generic register bitfield-based multiplexer that controls the multiplexer
producer defined under a parent node.
The driver corresponding to parent node provides register read/write
capabilities.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---

Notes:
    V2:
    - removed seperate driver regmap.c and added the regmap function in mmio.c
      based on compatible field, the syscon or regmap function would be called
    - Modified the KConfig as per Peter's comments

 drivers/mux/Kconfig | 12 ++++++------
 drivers/mux/mmio.c  |  6 +++++-
 2 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/mux/Kconfig b/drivers/mux/Kconfig
index 7659d6c5f718..e5c571fd232c 100644
--- a/drivers/mux/Kconfig
+++ b/drivers/mux/Kconfig
@@ -46,14 +46,14 @@ config MUX_GPIO
 	  be called mux-gpio.
 
 config MUX_MMIO
-	tristate "MMIO register bitfield-controlled Multiplexer"
-	depends on (OF && MFD_SYSCON) || COMPILE_TEST
+	tristate "MMIO/Regmap register bitfield-controlled Multiplexer"
+	depends on OF || COMPILE_TEST
 	help
-	  MMIO register bitfield-controlled Multiplexer controller.
+	  MMIO/Regmap register bitfield-controlled Multiplexer controller.
 
-	  The driver builds multiplexer controllers for bitfields in a syscon
-	  register. For N bit wide bitfields, there will be 2^N possible
-	  multiplexer states.
+	  The driver builds multiplexer controllers for bitfields in either
+	  a syscon register or a driver regmap register. For N bit wide
+	  bitfields, there will be 2^N possible multiplexer states.
 
 	  To compile the driver as a module, choose M here: the module will
 	  be called mux-mmio.
diff --git a/drivers/mux/mmio.c b/drivers/mux/mmio.c
index 935ac44aa209..37fbcde7f1fc 100644
--- a/drivers/mux/mmio.c
+++ b/drivers/mux/mmio.c
@@ -28,6 +28,7 @@ static const struct mux_control_ops mux_mmio_ops = {
 
 static const struct of_device_id mux_mmio_dt_ids[] = {
 	{ .compatible = "mmio-mux", },
+	{ .compatible = "reg-mux", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mux_mmio_dt_ids);
@@ -43,7 +44,10 @@ static int mux_mmio_probe(struct platform_device *pdev)
 	int ret;
 	int i;
 
-	regmap = syscon_node_to_regmap(np->parent);
+	if (of_device_is_compatible(np, "mmio-mux"))
+		regmap = syscon_node_to_regmap(np->parent);
+	else
+		regmap = dev_get_regmap(dev->parent, NULL);
 	if (IS_ERR(regmap)) {
 		ret = PTR_ERR(regmap);
 		dev_err(dev, "failed to get regmap: %d\n", ret);
-- 
2.17.1


             reply	other threads:[~2019-02-21 12:48 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-21 12:48 Pankaj Bansal [this message]
2019-02-21 13:42 ` [PATCH v2] drivers: mux: Add Generic regmap bitfield-based multiplexer in mmio-mux Peter Rosin
2019-02-21 14:17   ` Pankaj Bansal
2019-02-21 16:06     ` Peter Rosin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190221181230.4892-1-pankaj.bansal@nxp.com \
    --to=pankaj.bansal@nxp.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peda@axentia.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).