From: Clark Wang <xiaoning.wang@nxp.com>
To: "broonie@kernel.org" <broonie@kernel.org>
Cc: "linux-spi@vger.kernel.org" <linux-spi@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH V2 1/8] spi: lpspi: Add i.MX8 boards support for lpspi
Date: Wed, 6 Mar 2019 06:30:34 +0000 [thread overview]
Message-ID: <20190306063020.793-2-xiaoning.wang@nxp.com> (raw)
In-Reply-To: <20190306063020.793-1-xiaoning.wang@nxp.com>
Add both ipg and per clock for lpspi to support i.MX8QM/QXP boards.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
---
V2:
- No change. But add DT-bindings string at the next patch.
---
drivers/spi/spi-fsl-lpspi.c | 52 +++++++++++++++++++++++++++++--------
1 file changed, 41 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 391863914043..f363c000d24a 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -84,7 +84,8 @@ struct lpspi_config {
struct fsl_lpspi_data {
struct device *dev;
void __iomem *base;
- struct clk *clk;
+ struct clk *clk_ipg;
+ struct clk *clk_per;
bool is_slave;
void *rx_buf;
@@ -151,8 +152,19 @@ static int lpspi_prepare_xfer_hardware(struct spi_controller *controller)
{
struct fsl_lpspi_data *fsl_lpspi =
spi_controller_get_devdata(controller);
+ int ret;
+
+ ret = clk_prepare_enable(fsl_lpspi->clk_ipg);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(fsl_lpspi->clk_per);
+ if (ret) {
+ clk_disable_unprepare(fsl_lpspi->clk_ipg);
+ return ret;
+ }
- return clk_prepare_enable(fsl_lpspi->clk);
+ return 0;
}
static int lpspi_unprepare_xfer_hardware(struct spi_controller *controller)
@@ -160,7 +172,8 @@ static int lpspi_unprepare_xfer_hardware(struct spi_controller *controller)
struct fsl_lpspi_data *fsl_lpspi =
spi_controller_get_devdata(controller);
- clk_disable_unprepare(fsl_lpspi->clk);
+ clk_disable_unprepare(fsl_lpspi->clk_ipg);
+ clk_disable_unprepare(fsl_lpspi->clk_per);
return 0;
}
@@ -241,7 +254,7 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi)
unsigned int perclk_rate, scldiv;
u8 prescale;
- perclk_rate = clk_get_rate(fsl_lpspi->clk);
+ perclk_rate = clk_get_rate(fsl_lpspi->clk_per);
for (prescale = 0; prescale < 8; prescale++) {
scldiv = perclk_rate /
(clkdivs[prescale] * config.speed_hz) - 2;
@@ -526,15 +539,30 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
goto out_controller_put;
}
- fsl_lpspi->clk = devm_clk_get(&pdev->dev, "ipg");
- if (IS_ERR(fsl_lpspi->clk)) {
- ret = PTR_ERR(fsl_lpspi->clk);
+ fsl_lpspi->clk_per = devm_clk_get(&pdev->dev, "per");
+ if (IS_ERR(fsl_lpspi->clk_per)) {
+ ret = PTR_ERR(fsl_lpspi->clk_per);
+ goto out_controller_put;
+ }
+
+ fsl_lpspi->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(fsl_lpspi->clk_ipg)) {
+ ret = PTR_ERR(fsl_lpspi->clk_ipg);
+ goto out_controller_put;
+ }
+
+ ret = clk_prepare_enable(fsl_lpspi->clk_ipg);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "can't enable lpspi ipg clock, ret=%d\n", ret);
goto out_controller_put;
}
- ret = clk_prepare_enable(fsl_lpspi->clk);
+ ret = clk_prepare_enable(fsl_lpspi->clk_per);
if (ret) {
- dev_err(&pdev->dev, "can't enable lpspi clock, ret=%d\n", ret);
+ dev_err(&pdev->dev,
+ "can't enable lpspi per clock, ret=%d\n", ret);
+ clk_disable_unprepare(fsl_lpspi->clk_ipg);
goto out_controller_put;
}
@@ -542,7 +570,8 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
fsl_lpspi->txfifosize = 1 << (temp & 0x0f);
fsl_lpspi->rxfifosize = 1 << ((temp >> 8) & 0x0f);
- clk_disable_unprepare(fsl_lpspi->clk);
+ clk_disable_unprepare(fsl_lpspi->clk_per);
+ clk_disable_unprepare(fsl_lpspi->clk_ipg);
ret = devm_spi_register_controller(&pdev->dev, controller);
if (ret < 0) {
@@ -564,7 +593,8 @@ static int fsl_lpspi_remove(struct platform_device *pdev)
struct fsl_lpspi_data *fsl_lpspi =
spi_controller_get_devdata(controller);
- clk_disable_unprepare(fsl_lpspi->clk);
+ clk_disable_unprepare(fsl_lpspi->clk_per);
+ clk_disable_unprepare(fsl_lpspi->clk_ipg);
return 0;
}
--
2.17.1
next prev parent reply other threads:[~2019-03-06 6:30 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-06 6:30 [PATCH V2 0/8] spi: lpspi: Fix bugs and Add some functions support Clark Wang
2019-03-06 6:30 ` Clark Wang [this message]
2019-03-06 6:30 ` [PATCH V2 2/8] doc: lpspi: Document DT bindings for LPSPI clocks Clark Wang
2019-03-18 14:52 ` Applied "doc: lpspi: Document DT bindings for LPSPI clocks" to the spi tree Mark Brown
2019-03-06 6:30 ` [PATCH V2 3/8] spi: lpspi: enable runtime pm for lpspi Clark Wang
2019-03-06 6:30 ` [PATCH V2 4/8] spi: lpspi: add the error info of transfer speed setting Clark Wang
2019-03-06 6:30 ` [PATCH V2 5/8] spi: lpspi: use the core way to implement cs-gpio function Clark Wang
2019-03-18 14:52 ` Applied "spi: lpspi: use the core way to implement cs-gpio function" to the spi tree Mark Brown
2019-03-06 6:30 ` [PATCH V2 6/8] spi: lpspi: add dma mode support Clark Wang
2019-03-18 14:52 ` Applied "spi: lpspi: add dma mode support" to the spi tree Mark Brown
2019-03-06 6:30 ` [PATCH V2 7/8] spi: lpspi: Add the missing NULL check Clark Wang
2019-03-18 14:52 ` Applied "spi: lpspi: Add the missing NULL check" to the spi tree Mark Brown
2019-03-06 6:30 ` [PATCH V2 8/8] spi: lpspi: Code cleanup Clark Wang
2019-03-18 14:52 ` Applied "spi: lpspi: Code cleanup" to the spi tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190306063020.793-2-xiaoning.wang@nxp.com \
--to=xiaoning.wang@nxp.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).