LKML Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] sched: Do not re-read h_load_next during hierarchical load calculation v2
@ 2019-03-19 12:36 Mel Gorman
  2019-03-19 15:37 ` Peter Zijlstra
  2019-04-03  8:37 ` [tip:sched/core] sched/fair: Do not re-read ->h_load_next during hierarchical load calculation tip-bot for Mel Gorman
  0 siblings, 2 replies; 3+ messages in thread
From: Mel Gorman @ 2019-03-19 12:36 UTC (permalink / raw)
  To: Peter Zijlstra; +Cc: Ingo Molnar, Valentin Schneider, linux-kernel

Changelog since v1
o Use WRITE_ONCE
o Add Fixes:
o Add reviewed-by for the READ_ONCE part as I considered it to still be
  ok even after the WRITE_ONCE

A NULL pointer dereference bug was reported on a distribution kernel but
the same issue should be present on mainline kernel. It occured on s390
but should not be arch-specific.  A partial oops looks like

[775277.408564] Unable to handle kernel pointer dereference in virtual kernel address space
...
[775277.408759] Call Trace:
[775277.408763] ([<0002c11c56899c61>] 0x2c11c56899c61)
[775277.408766]  [<0000000000177bb4>] try_to_wake_up+0xfc/0x450
[775277.408773]  [<000003ff81ede872>] vhost_poll_wakeup+0x3a/0x50 [vhost]
[775277.408777]  [<0000000000194ae4>] __wake_up_common+0xbc/0x178
[775277.408779]  [<0000000000194f86>] __wake_up_common_lock+0x9e/0x160
[775277.408780]  [<00000000001950de>] __wake_up_sync_key+0x4e/0x60
[775277.408785]  [<00000000005d911e>] sock_def_readable+0x5e/0x98

The bug hits any time between 1 hour to 3 days. The dereference occurs
in update_cfs_rq_h_load when accumulating h_load. The problem is that
cfq_rq->h_load_next is not protected by any locking and can be updated
by parallel calls to task_h_load. Depending on the compiler, code may be
generated that re-reads cfq_rq->h_load_next after the check for NULL and
then oops when reading se->avg.load_avg. The dissassembly showed that it
was possible to reread h_load_next after the check for NULL.

While this does not appear to be an issue for later compilers, it's still
an accident if the correct code is generated. Full locking in this path
would have high overhead so this patch uses READ_ONCE to read h_load_next
only once and check for NULL before dereferencing. It was confirmed that
there were no further oops after 10 days of testing.

As Peter pointed out, it is also necessary to use WRITE_ONCE to avoid any
potential problems with store tearing.

Fixes: 685207963be9 ("sched: Move h_load calculation to task_h_load()")
[peterz@infradead.org: Use WRITE_ONCE to protect against store tearing]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: stable@vger.kernel.org
---
 kernel/sched/fair.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 310d0637fe4b..5e61a1a99e38 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -7713,10 +7713,10 @@ static void update_cfs_rq_h_load(struct cfs_rq *cfs_rq)
 	if (cfs_rq->last_h_load_update == now)
 		return;
 
-	cfs_rq->h_load_next = NULL;
+	WRITE_ONCE(cfs_rq->h_load_next, NULL);
 	for_each_sched_entity(se) {
 		cfs_rq = cfs_rq_of(se);
-		cfs_rq->h_load_next = se;
+		WRITE_ONCE(cfs_rq->h_load_next, se);
 		if (cfs_rq->last_h_load_update == now)
 			break;
 	}
@@ -7726,7 +7726,7 @@ static void update_cfs_rq_h_load(struct cfs_rq *cfs_rq)
 		cfs_rq->last_h_load_update = now;
 	}
 
-	while ((se = cfs_rq->h_load_next) != NULL) {
+	while ((se = READ_ONCE(cfs_rq->h_load_next)) != NULL) {
 		load = cfs_rq->h_load;
 		load = div64_ul(load * se->avg.load_avg,
 			cfs_rq_load_avg(cfs_rq) + 1);

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-19 12:36 [PATCH] sched: Do not re-read h_load_next during hierarchical load calculation v2 Mel Gorman
2019-03-19 15:37 ` Peter Zijlstra
2019-04-03  8:37 ` [tip:sched/core] sched/fair: Do not re-read ->h_load_next during hierarchical load calculation tip-bot for Mel Gorman

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox