From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: dri-devel@lists.freedesktop.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Archit Taneja <architt@codeaurora.org>,
Andrzej Hajda <a.hajda@samsung.com>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Andrey Gusakov <andrey.gusakov@cogentembedded.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Chris Healy <cphealy@gmail.com>,
Lucas Stach <l.stach@pengutronix.de>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 11/15] drm/bridge: tc358767: Introduce tc_set_syspllparam()
Date: Thu, 21 Mar 2019 20:28:57 -0700 [thread overview]
Message-ID: <20190322032901.12045-12-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190322032901.12045-1-andrew.smirnov@gmail.com>
Move common code converting clock rate to an appropriate constant and
configuring SYS_PLLPARAM register into a separate routine and convert
the rest of the code to use it. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
---
drivers/gpu/drm/bridge/tc358767.c | 48 +++++++++++--------------------
1 file changed, 17 insertions(+), 31 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 768f01cc2a30..976a9861e537 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -585,35 +585,41 @@ static int tc_stream_clock_calc(struct tc_data *tc)
return regmap_write(tc->regmap, DP0_VIDMNGEN1, 32768);
}
-static int tc_aux_link_setup(struct tc_data *tc)
+static int tc_set_syspllparam(struct tc_data *tc)
{
unsigned long rate;
- u32 dp0_auxcfg1;
- u32 value;
- int ret;
+ u32 pllparam = SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
rate = clk_get_rate(tc->refclk);
switch (rate) {
case 38400000:
- value = REF_FREQ_38M4;
+ pllparam |= REF_FREQ_38M4;
break;
case 26000000:
- value = REF_FREQ_26M;
+ pllparam |= REF_FREQ_26M;
break;
case 19200000:
- value = REF_FREQ_19M2;
+ pllparam |= REF_FREQ_19M2;
break;
case 13000000:
- value = REF_FREQ_13M;
+ pllparam |= REF_FREQ_13M;
break;
default:
dev_err(tc->dev, "Invalid refclk rate: %lu Hz\n", rate);
return -EINVAL;
}
+ return regmap_write(tc->regmap, SYS_PLLPARAM, pllparam);
+}
+
+static int tc_aux_link_setup(struct tc_data *tc)
+{
+ int ret;
+ u32 dp_phy_ctrl;
+ u32 dp0_auxcfg1;
+
/* Setup DP-PHY / PLL */
- value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
- ret = regmap_write(tc->regmap, SYS_PLLPARAM, value);
+ ret = tc_set_syspllparam(tc);
if (ret)
goto err;
@@ -817,8 +823,6 @@ static int tc_main_link_enable(struct tc_data *tc)
{
struct drm_dp_aux *aux = &tc->aux;
struct device *dev = tc->dev;
- unsigned int rate;
- u32 dp_phy_ctrl;
u32 value;
int ret;
u8 tmp[8];
@@ -840,25 +844,7 @@ static int tc_main_link_enable(struct tc_data *tc)
if (ret)
return ret;
- rate = clk_get_rate(tc->refclk);
- switch (rate) {
- case 38400000:
- value = REF_FREQ_38M4;
- break;
- case 26000000:
- value = REF_FREQ_26M;
- break;
- case 19200000:
- value = REF_FREQ_19M2;
- break;
- case 13000000:
- value = REF_FREQ_13M;
- break;
- default:
- return -EINVAL;
- }
- value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
- ret = regmap_write(tc->regmap, SYS_PLLPARAM, value);
+ ret = tc_set_syspllparam(tc);
if (ret)
return ret;
--
2.20.1
next prev parent reply other threads:[~2019-03-22 3:29 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-22 3:28 [PATCH v2 00/15] tc358767 driver improvements Andrey Smirnov
2019-03-22 3:28 ` [PATCH v2 01/15] drm/bridge: tc358767: Simplify tc_poll_timeout() Andrey Smirnov
2019-03-22 10:12 ` Tomi Valkeinen
2019-03-22 3:28 ` [PATCH v2 02/15] drm/bridge: tc358767: Simplify polling in tc_main_link_setup() Andrey Smirnov
2019-03-22 10:13 ` Tomi Valkeinen
2019-03-22 3:28 ` [PATCH v2 03/15] drm/bridge: tc358767: Simplify polling in tc_link_training() Andrey Smirnov
2019-03-22 10:14 ` Tomi Valkeinen
2019-03-22 3:28 ` [PATCH v2 04/15] drm/bridge: tc358767: Simplify tc_set_video_mode() Andrey Smirnov
2019-03-22 10:19 ` Tomi Valkeinen
2019-03-22 17:24 ` Andrey Smirnov
2019-03-22 3:28 ` [PATCH v2 05/15] drm/bridge: tc358767: Drop custom tc_write()/tc_read() accessors Andrey Smirnov
2019-03-22 10:29 ` Tomi Valkeinen
2019-03-22 17:45 ` Andrey Smirnov
2019-03-22 3:28 ` [PATCH v2 07/15] drm/bridge: tc358767: Simplify AUX data write Andrey Smirnov
2019-03-22 10:51 ` Tomi Valkeinen
2019-03-22 17:25 ` Andrey Smirnov
2019-03-22 3:28 ` [PATCH v2 08/15] drm/bridge: tc358767: Increase AUX transfer length limit Andrey Smirnov
2019-03-22 13:14 ` Tomi Valkeinen
2019-03-22 19:01 ` Andrey Smirnov
2019-03-22 3:28 ` [PATCH v2 09/15] drm/bridge: tc358767: Use reported AUX transfer size Andrey Smirnov
2019-03-22 3:28 ` [PATCH v2 10/15] drm/bridge: tc358767: Add support for address-only I2C transfers Andrey Smirnov
2019-03-22 3:28 ` Andrey Smirnov [this message]
2019-03-22 3:28 ` [PATCH v2 12/15] drm/bridge: tc358767: Introduce tc_pllupdate_pllen() Andrey Smirnov
2019-03-22 3:28 ` [PATCH v2 13/15] drm/bridge: tc358767: Simplify tc_aux_wait_busy() Andrey Smirnov
2019-03-22 3:29 ` [PATCH v2 14/15] drm/bridge: tc358767: Drop unnecessary 8 byte buffer Andrey Smirnov
2019-03-22 3:29 ` [PATCH v2 15/15] drm/bridge: tc358767: Replace magic number in tc_main_link_enable() Andrey Smirnov
2019-03-22 8:05 ` [PATCH v2 00/15] tc358767 driver improvements Tomi Valkeinen
2019-03-22 19:25 ` Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190322032901.12045-12-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=a.hajda@samsung.com \
--cc=andrey.gusakov@cogentembedded.com \
--cc=architt@codeaurora.org \
--cc=cphealy@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=l.stach@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).