linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alan Kao <alankao@andestech.com>
To: Anup Patel <Anup.Patel@wdc.com>
Cc: Palmer Dabbelt <palmer@sifive.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Mike Rapoport <rppt@linux.ibm.com>,
	Christoph Hellwig <hch@infradead.org>,
	Atish Patra <Atish.Patra@wdc.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	"linux-riscv@lists.infradead.org"
	<linux-riscv@lists.infradead.org>
Subject: Re: [PATCH v2] RISC-V: Always compile mm/init.c with cmodel=medany
Date: Mon, 25 Mar 2019 13:25:50 +0800	[thread overview]
Message-ID: <20190325052550.GA30996@andestech.com> (raw)
In-Reply-To: <20190325033648.16171-1-anup.patel@wdc.com>

Hi Anup,

Sorry for being late to the party.  I think one more thing should
move together with setup_vm():

On Mon, Mar 25, 2019 at 03:37:38AM +0000, Anup Patel wrote:
> The Linux RISC-V 32bit kernel is broken after we moved setup_vm() from
> kernel/setup.c to mm/init.c because Linux RISC-V 32bit kernel by default
> uses cmodel=medlow which results in a non-position-independent setup_vm().
> 
> This patch fixes Linux RISC-V 32bit kernel booting by:
> 1. Forcing cmodel=medany for mm/init.c
> 2. Moving remaing MM-related stuff va_pa_offset, pfn_base and
>    empty_zero_page from kernel/setup.c to mm/init.c
> 
> Fixes: 6f1e9e946f0b ("RISC-V: Move setup_vm() to mm/init.c")
> Suggested-by: Christoph Hellwig <hch@lst.de>
> Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
> Signed-off-by: Anup Patel <anup.patel@wdc.com>
> ---
> v2: Removed CFLAGS_setup.o from kernel/Makefile and replaced SoBs
> ---
>  arch/riscv/kernel/Makefile | 2 --
>  arch/riscv/kernel/setup.c  | 8 --------
>  arch/riscv/mm/Makefile     | 2 ++
>  arch/riscv/mm/init.c       | 9 +++++++++
>  4 files changed, 11 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> index f13f7f276639..8b9780b6bd7f 100644
> --- a/arch/riscv/kernel/Makefile
> +++ b/arch/riscv/kernel/Makefile

earlier in this file, there are four lines about ftrace,

  5 ifdef CONFIG_FTRACE
  6 CFLAGS_REMOVE_ftrace.o = -pg
  7 CFLAGS_REMOVE_setup.o = -pg
  8 endif

removing "-pg" flag from setup.o was necessary for ftrace to work, since
setup_vm() cannot process the trampoline of ftrace properly.

As setup_vm() is being moved to mm/init.c, you may either mark it with a
"notrace" attribute with its declaration, or adding corresponding CFLAGS_REMOVE*
to mm/Makefile.

> @@ -29,8 +29,6 @@ obj-y	+= vdso.o
>  obj-y	+= cacheinfo.o
>  obj-y	+= vdso/
>  
> -CFLAGS_setup.o := -mcmodel=medany
> -
>  obj-$(CONFIG_FPU)		+= fpu.o
>  obj-$(CONFIG_SMP)		+= smpboot.o
>  obj-$(CONFIG_SMP)		+= smp.o
> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index ecb654f6a79e..540a331d1376 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -48,14 +48,6 @@ struct screen_info screen_info = {
>  };
>  #endif
>  
> -unsigned long va_pa_offset;
> -EXPORT_SYMBOL(va_pa_offset);
> -unsigned long pfn_base;
> -EXPORT_SYMBOL(pfn_base);
> -
> -unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)] __page_aligned_bss;
> -EXPORT_SYMBOL(empty_zero_page);
> -
>  /* The lucky hart to first increment this variable will boot the other cores */
>  atomic_t hart_lottery;
>  unsigned long boot_cpu_hartid;
> diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
> index eb22ab49b3e0..7307609d405b 100644
> --- a/arch/riscv/mm/Makefile
> +++ b/arch/riscv/mm/Makefile
> @@ -3,3 +3,5 @@ obj-y += fault.o
>  obj-y += extable.o
>  obj-y += ioremap.o
>  obj-y += cacheflush.o
> +
> +CFLAGS_init.o := -mcmodel=medany
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index b379a75ac6a6..7a7c454378cb 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -25,6 +25,10 @@
>  #include <asm/pgtable.h>
>  #include <asm/io.h>
>  
> +unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]
> +							__page_aligned_bss;
> +EXPORT_SYMBOL(empty_zero_page);
> +
>  static void __init zone_sizes_init(void)
>  {
>  	unsigned long max_zone_pfns[MAX_NR_ZONES] = { 0, };
> @@ -143,6 +147,11 @@ void __init setup_bootmem(void)
>  	}
>  }
>  
> +unsigned long va_pa_offset;
> +EXPORT_SYMBOL(va_pa_offset);
> +unsigned long pfn_base;
> +EXPORT_SYMBOL(pfn_base);
> +
>  pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
>  pgd_t trampoline_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
>  
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

Alan

  reply	other threads:[~2019-03-25  5:26 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-25  3:37 [PATCH v2] RISC-V: Always compile mm/init.c with cmodel=medany Anup Patel
2019-03-25  5:25 ` Alan Kao [this message]
2019-03-25  6:48   ` Christoph Hellwig
2019-03-25  7:01     ` Anup Patel
2019-03-26  2:22       ` Palmer Dabbelt
2019-03-26  4:01         ` Anup Patel
2019-03-27  0:10         ` Alistair Francis
2019-03-25  6:59   ` Anup Patel
2019-03-25  6:12 ` Mike Rapoport

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190325052550.GA30996@andestech.com \
    --to=alankao@andestech.com \
    --cc=Anup.Patel@wdc.com \
    --cc=Atish.Patra@wdc.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=hch@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@sifive.com \
    --cc=paul.walmsley@sifive.com \
    --cc=rppt@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).