LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: robh+dt@kernel.org, andy.gross@linaro.org,
	myungjoo.ham@samsung.com, kyungmin.park@samsung.com,
	rjw@rjwysocki.net, viresh.kumar@linaro.org, nm@ti.com,
	sboyd@kernel.org, georgi.djakov@linaro.org
Cc: bjorn.andersson@linaro.org, david.brown@linaro.org,
	mark.rutland@arm.com, linux-kernel@vger.kernel.org,
	linux-arm-msm-owner@vger.kernel.org, devicetree@vger.kernel.org,
	rnayak@codeaurora.org, cw00.choi@samsung.com,
	linux-pm@vger.kernel.org, evgreen@chromium.org,
	daidavid1@codeaurora.org, dianders@chromium.org,
	Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH RFC 9/9] arm64: dts: qcom: sdm845: Add nodes for icbw driver and opp tables
Date: Thu, 28 Mar 2019 20:58:22 +0530
Message-ID: <20190328152822.532-10-sibis@codeaurora.org> (raw)
In-Reply-To: <20190328152822.532-1-sibis@codeaurora.org>

Add nodes to enable DDR devfreq driver on SDM845 SoC.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 80 ++++++++++++++++++++++++++++
 1 file changed, 80 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 072563f6b6cb..21a0068855e8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/clock/qcom,lpass-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sdm845.h>
+#include <dt-bindings/interconnect/qcom,sdm845.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-aoss-qmp.h>
@@ -488,6 +489,85 @@
 		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	cpubw: cpu-icbw {
+		compatible = "devfreq-icbw";
+		interconnects = <&rsc_hlos MASTER_APPSS_PROC &rsc_hlos SLAVE_EBI1>;
+		operating-points-v2 = <&bw_opp_table>;
+	};
+
+	bw_opp_table: bw-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-200  {
+			opp-hz = /bits/ 64 < 200000000 >; /* 200 MHz */
+			required-opps = <&cpu0_opp1>;
+			/* 0 MB/s average and 762 MB/s peak bandwidth */
+			opp-bw-MBs = <0 762>;
+		};
+
+		opp-300 {
+			opp-hz = /bits/ 64 < 300000000 >; /* 300 MHz */
+			/* 0 MB/s average and 1144 MB/s peak bandwidth */
+			opp-bw-MBs = <0 1144>;
+		};
+
+		opp-451 {
+			opp-hz = /bits/ 64 < 451000000 >; /* 451 MHz */
+			/* 0 MB/s average and 1720 MB/s peak bandwidth */
+			opp-bw-MBs = <0 1720>;
+			required-opps = <&cpu0_opp6>;
+		};
+
+		opp-547 {
+			opp-hz = /bits/ 64 < 547000000 >; /* 547 MHz */
+			/* 0 MB/s average and 2086 MB/s peak bandwidth */
+			opp-bw-MBs = <0 2086>;
+			required-opps = <&cpu0_opp11>;
+		};
+
+		opp-681 {
+			opp-hz = /bits/ 64 < 681000000 >; /* 681 MHz */
+			/* 0 MB/s average and 2597 MB/s peak bandwidth */
+			opp-bw-MBs = <0 2597>;
+			required-opps = <&cpu0_opp15>;
+		};
+
+		opp-768 {
+			opp-hz = /bits/ 64 < 768000000 >; /* 768 MHz */
+			/* 0 MB/s average and 2929 MB/s peak bandwidth */
+			opp-bw-MBs = <0 2929>;
+			required-opps = <&cpu4_opp4>;
+		};
+
+		opp-1017 {
+			opp-hz = /bits/ 64 < 1017000000 >; /* 1017 MHz */
+			/* 0 MB/s average and 3879 MB/s peak bandwidth */
+			opp-bw-MBs = <0 3879>;
+			required-opps = <&cpu0_opp16>, <&cpu4_opp5>;
+		};
+
+		opp-1296 {
+			opp-hz = /bits/ 64 < 1296000000 >; /* 1296 MHz */
+			/* 0 MB/s average and 4943 MB/s peak bandwidth */
+			opp-bw-MBs = <0 4943>;
+			required-opps = <&cpu4_opp10>;
+		};
+
+		opp-1555 {
+			opp-hz = /bits/ 64 < 1555000000 >; /* 1555 MHz */
+			/* 0 MB/s average and 5931 MB/s peak bandwidth */
+			opp-bw-MBs = <0 5931>;
+			required-opps = <&cpu4_opp12>;
+		};
+
+		opp-1804 {
+			opp-hz = /bits/ 64 < 1804000000 >; /* 1804 MHz */
+			/* 0 MB/s average and 6881 MB/s peak bandwidth */
+			opp-bw-MBs = <0 6881>;
+			required-opps = <&cpu4_opp15>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-28 15:28 [PATCH RFC 0/9] Add CPU based scaling support to Passive governor Sibi Sankar
2019-03-28 15:28 ` [PATCH RFC 1/9] OPP: Add and export helpers to get avg/peak bw Sibi Sankar
2019-03-28 15:28 ` [PATCH RFC 2/9] OPP: Export a number of helpers to prevent code duplication Sibi Sankar
2019-07-08  3:28   ` Hsin-Yi Wang
2019-07-10  8:01     ` Sibi Sankar
2019-03-28 15:28 ` [PATCH RFC 3/9] PM / devfreq: Add cpu based scaling support to passive_governor Sibi Sankar
2019-04-12  7:39   ` Chanwoo Choi
2019-05-27  8:23     ` Sibi Sankar
2019-05-28  1:27       ` Chanwoo Choi
2019-03-28 15:28 ` [PATCH RFC 4/9] dt-bindings: devfreq: Add bindings for devfreq dev-icbw driver Sibi Sankar
2019-03-28 15:28 ` [PATCH RFC 5/9] PM / devfreq: Add devfreq driver for interconnect bandwidth voting Sibi Sankar
2019-03-28 15:28 ` [PATCH RFC 6/9] OPP: Add and export helper to update voltage Sibi Sankar
2019-04-10 10:24   ` Viresh Kumar
2019-04-10 11:08     ` Sibi Sankar
2019-03-28 15:28 ` [PATCH RFC 7/9] cpufreq: qcom: Add support to update cpu node's OPP tables Sibi Sankar
2019-04-10 10:33   ` Viresh Kumar
2019-04-10 11:16     ` Sibi Sankar
2019-04-10 11:25       ` Viresh Kumar
2019-03-28 15:28 ` [PATCH RFC 8/9] arm64: dts: qcom: sdm845: Add cpu " Sibi Sankar
2019-03-28 15:28 ` Sibi Sankar [this message]
2019-04-11  7:02 ` [PATCH RFC 0/9] Add CPU based scaling support to Passive governor Sibi Sankar

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190328152822.532-10-sibis@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=cw00.choi@samsung.com \
    --cc=daidavid1@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=georgi.djakov@linaro.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-msm-owner@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=nm@ti.com \
    --cc=rjw@rjwysocki.net \
    --cc=rnayak@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox