linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Paul E. McKenney" <paulmck@linux.ibm.com>
To: Alexander Potapenko <glider@google.com>
Cc: hpa@zytor.com, peterz@infradead.org,
	linux-kernel@vger.kernel.org, dvyukov@google.com,
	jyknight@google.com, x86@kernel.org, mingo@redhat.com
Subject: Re: [PATCH] x86/asm: use memory clobber in bitops that touch arbitrary memory
Date: Mon, 1 Apr 2019 12:12:16 -0700	[thread overview]
Message-ID: <20190401191216.GP4102@linux.ibm.com> (raw)
In-Reply-To: <20190401162408.249668-1-glider@google.com>

On Mon, Apr 01, 2019 at 06:24:08PM +0200, Alexander Potapenko wrote:
> Certain bit operations that read/write bits take a base pointer and an
> arbitrarily large offset to address the bit relative to that base.
> Inline assembly constraints aren't expressive enough to tell the
> compiler that the assembly directive is going to touch a specific memory
> location of unknown size, therefore we have to use the "memory" clobber
> to indicate that the assembly is going to access memory locations other
> than those listed in the inputs/outputs.
> 
> This particular patch leads to size increase of 124 kernel functions in
> a defconfig build. For some of them the diff is in NOP operations, other
> end up re-reading values from memory and may potentially slow down the
> execution. But without these clobbers the compiler is free to cache
> the contents of the bitmaps and use them as if they weren't changed by
> the inline assembly.
> 
> Signed-off-by: Alexander Potapenko <glider@google.com>
> Cc: Dmitry Vyukov <dvyukov@google.com>
> Cc: Paul E. McKenney <paulmck@linux.ibm.com>
> Cc: H. Peter Anvin <hpa@zytor.com>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: James Y Knight <jyknight@google.com>

Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>

> ---
>  arch/x86/include/asm/bitops.h | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
> index d153d570bb04..20e4950827d9 100644
> --- a/arch/x86/include/asm/bitops.h
> +++ b/arch/x86/include/asm/bitops.h
> @@ -111,7 +111,7 @@ clear_bit(long nr, volatile unsigned long *addr)
>  	} else {
>  		asm volatile(LOCK_PREFIX __ASM_SIZE(btr) " %1,%0"
>  			: BITOP_ADDR(addr)
> -			: "Ir" (nr));
> +			: "Ir" (nr) : "memory");
>  	}
>  }
>  
> @@ -131,7 +131,7 @@ static __always_inline void clear_bit_unlock(long nr, volatile unsigned long *ad
>  
>  static __always_inline void __clear_bit(long nr, volatile unsigned long *addr)
>  {
> -	asm volatile(__ASM_SIZE(btr) " %1,%0" : ADDR : "Ir" (nr));
> +	asm volatile(__ASM_SIZE(btr) " %1,%0" : ADDR : "Ir" (nr) : "memory");
>  }
>  
>  static __always_inline bool clear_bit_unlock_is_negative_byte(long nr, volatile unsigned long *addr)
> @@ -176,7 +176,7 @@ static __always_inline void __clear_bit_unlock(long nr, volatile unsigned long *
>   */
>  static __always_inline void __change_bit(long nr, volatile unsigned long *addr)
>  {
> -	asm volatile(__ASM_SIZE(btc) " %1,%0" : ADDR : "Ir" (nr));
> +	asm volatile(__ASM_SIZE(btc) " %1,%0" : ADDR : "Ir" (nr) : "memory");
>  }
>  
>  /**
> @@ -197,7 +197,7 @@ static __always_inline void change_bit(long nr, volatile unsigned long *addr)
>  	} else {
>  		asm volatile(LOCK_PREFIX __ASM_SIZE(btc) " %1,%0"
>  			: BITOP_ADDR(addr)
> -			: "Ir" (nr));
> +			: "Ir" (nr) : "memory");
>  	}
>  }
>  
> @@ -243,7 +243,7 @@ static __always_inline bool __test_and_set_bit(long nr, volatile unsigned long *
>  	asm(__ASM_SIZE(bts) " %2,%1"
>  	    CC_SET(c)
>  	    : CC_OUT(c) (oldbit), ADDR
> -	    : "Ir" (nr));
> +	    : "Ir" (nr) : "memory");
>  	return oldbit;
>  }
>  
> @@ -283,7 +283,7 @@ static __always_inline bool __test_and_clear_bit(long nr, volatile unsigned long
>  	asm volatile(__ASM_SIZE(btr) " %2,%1"
>  		     CC_SET(c)
>  		     : CC_OUT(c) (oldbit), ADDR
> -		     : "Ir" (nr));
> +		     : "Ir" (nr) : "memory");
>  	return oldbit;
>  }
>  
> @@ -326,7 +326,7 @@ static __always_inline bool variable_test_bit(long nr, volatile const unsigned l
>  	asm volatile(__ASM_SIZE(bt) " %2,%1"
>  		     CC_SET(c)
>  		     : CC_OUT(c) (oldbit)
> -		     : "m" (*(unsigned long *)addr), "Ir" (nr));
> +		     : "m" (*(unsigned long *)addr), "Ir" (nr) : "memory");
>  
>  	return oldbit;
>  }
> -- 
> 2.21.0.392.gf8f6787159e-goog
> 


  reply	other threads:[~2019-04-01 19:12 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-01 16:24 [PATCH] x86/asm: use memory clobber in bitops that touch arbitrary memory Alexander Potapenko
2019-04-01 19:12 ` Paul E. McKenney [this message]
2019-04-02  7:26 ` Peter Zijlstra
2019-04-02  8:59   ` Alexander Potapenko
2019-04-02 11:31     ` Alexander Potapenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190401191216.GP4102@linux.ibm.com \
    --to=paulmck@linux.ibm.com \
    --cc=dvyukov@google.com \
    --cc=glider@google.com \
    --cc=hpa@zytor.com \
    --cc=jyknight@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).