linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Mark Brown <broonie@kernel.org>, Chris Healy <cphealy@gmail.com>,
	linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	Mark Brown <broonie@kernel.org>,
	linux-spi@vger.kernel.org, Mark Brown <broonie@kernel.org>,
	Chris Healy <cphealy@gmail.com>,
	linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org
Subject: Applied "spi: Don't call spi_get_gpio_descs() before device name is set" to the spi tree
Date: Fri,  5 Apr 2019 10:26:39 +0700 (+07)	[thread overview]
Message-ID: <20190405032639.3C438441D3B@finisterre.ee.mobilebroadband> (raw)
In-Reply-To: <20190403040133.1459-8-andrew.smirnov@gmail.com>

The patch

   spi: Don't call spi_get_gpio_descs() before device name is set

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 0a919ae49223d32ac0e8be3494547fcd1e4aa0aa Mon Sep 17 00:00:00 2001
From: Andrey Smirnov <andrew.smirnov@gmail.com>
Date: Tue, 2 Apr 2019 21:01:28 -0700
Subject: [PATCH] spi: Don't call spi_get_gpio_descs() before device name is
 set

Move code calling spi_get_gpio_descs() to happen after ctlr->dev's
name is set in order to have proper GPIO consumer names.

Before:

cat /sys/kernel/debug/gpio
gpiochip0: GPIOs 0-31, parent: platform/40049000.gpio, vf610-gpio:
 gpio-6   (                    |regulator-usb0-vbus ) out lo

gpiochip1: GPIOs 32-63, parent: platform/4004a000.gpio, vf610-gpio:
 gpio-36  (                    |scl                 ) in  hi
 gpio-37  (                    |sda                 ) in  hi
 gpio-40  (                    |(null) CS1          ) out lo
 gpio-41  (                    |(null) CS0          ) out lo ACTIVE LOW
 gpio-42  (                    |miso                ) in  hi
 gpio-43  (                    |mosi                ) in  lo
 gpio-44  (                    |sck                 ) out lo

After:

cat /sys/kernel/debug/gpio
gpiochip0: GPIOs 0-31, parent: platform/40049000.gpio, vf610-gpio:
 gpio-6   (                    |regulator-usb0-vbus ) out lo

gpiochip1: GPIOs 32-63, parent: platform/4004a000.gpio, vf610-gpio:
 gpio-36  (                    |scl                 ) in  hi
 gpio-37  (                    |sda                 ) in  hi
 gpio-40  (                    |spi0 CS1            ) out lo
 gpio-41  (                    |spi0 CS0            ) out lo ACTIVE LOW
 gpio-42  (                    |miso                ) in  hi
 gpio-43  (                    |mosi                ) in  lo
 gpio-44  (                    |sck                 ) out lo

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: linux-spi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi.c | 37 +++++++++++++++++++------------------
 1 file changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 2ad20c735b61..a83fcddf1dad 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2281,24 +2281,6 @@ int spi_register_controller(struct spi_controller *ctlr)
 	if (status)
 		return status;
 
-	if (!spi_controller_is_slave(ctlr)) {
-		if (ctlr->use_gpio_descriptors) {
-			status = spi_get_gpio_descs(ctlr);
-			if (status)
-				return status;
-			/*
-			 * A controller using GPIO descriptors always
-			 * supports SPI_CS_HIGH if need be.
-			 */
-			ctlr->mode_bits |= SPI_CS_HIGH;
-		} else {
-			/* Legacy code path for GPIOs from DT */
-			status = of_spi_register_master(ctlr);
-			if (status)
-				return status;
-		}
-	}
-
 	/* even if it's just one always-selected device, there must
 	 * be at least one chipselect
 	 */
@@ -2355,6 +2337,25 @@ int spi_register_controller(struct spi_controller *ctlr)
 	 * registration fails if the bus ID is in use.
 	 */
 	dev_set_name(&ctlr->dev, "spi%u", ctlr->bus_num);
+
+	if (!spi_controller_is_slave(ctlr)) {
+		if (ctlr->use_gpio_descriptors) {
+			status = spi_get_gpio_descs(ctlr);
+			if (status)
+				return status;
+			/*
+			 * A controller using GPIO descriptors always
+			 * supports SPI_CS_HIGH if need be.
+			 */
+			ctlr->mode_bits |= SPI_CS_HIGH;
+		} else {
+			/* Legacy code path for GPIOs from DT */
+			status = of_spi_register_master(ctlr);
+			if (status)
+				return status;
+		}
+	}
+
 	status = device_add(&ctlr->dev);
 	if (status < 0) {
 		/* free bus id */
-- 
2.20.1


  reply	other threads:[~2019-04-05  3:27 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-03  4:01 [PATCH 00/12] SPI GPIO improvements Andrey Smirnov
2019-04-03  4:01 ` [PATCH 01/12] spi: gpio: Drop unused spi_to_pdata() Andrey Smirnov
2019-04-03  4:42   ` Applied "spi: gpio: Drop unused spi_to_pdata()" to the spi tree Mark Brown
2019-04-03  4:01 ` [PATCH 02/12] spi: gpio: Add local struct device pointer in spi_gpio_probe() Andrey Smirnov
2019-04-03  4:42   ` Applied "spi: gpio: Add local struct device pointer in spi_gpio_probe()" to the spi tree Mark Brown
2019-04-03  4:01 ` [PATCH 03/12] spi: gpio: Add local struct spi_bitbang pointer in spi_gpio_probe() Andrey Smirnov
2019-04-03  4:42   ` Applied "spi: gpio: Add local struct spi_bitbang pointer in spi_gpio_probe()" to the spi tree Mark Brown
2019-04-03  4:01 ` [PATCH 04/12] spi: gpio: Simplify SPI_MASTER_NO_TX check in spi_gpio_probe() Andrey Smirnov
2019-04-03  4:42   ` Applied "spi: gpio: Simplify SPI_MASTER_NO_TX check in spi_gpio_probe()" to the spi tree Mark Brown
2019-04-03  4:01 ` [PATCH 05/12] spi: gpio: Drop unused pdata copy in struct spi_gpio Andrey Smirnov
2019-04-03  4:42   ` Applied "spi: gpio: Drop unused pdata copy in struct spi_gpio" to the spi tree Mark Brown
2019-04-03  4:01 ` [PATCH 06/12] spi: gpio: Don't request CS GPIO in DT use-case Andrey Smirnov
2019-04-05  3:26   ` Applied "spi: gpio: Don't request CS GPIO in DT use-case" to the spi tree Mark Brown
2019-04-03  4:01 ` [PATCH 07/12] spi: Don't call spi_get_gpio_descs() before device name is set Andrey Smirnov
2019-04-05  3:26   ` Mark Brown [this message]
2019-04-03  4:01 ` [PATCH 08/12] spi: gpio: Drop mflags argument from spi_gpio_request() Andrey Smirnov
2019-04-05  3:26   ` Applied "spi: gpio: Drop mflags argument from spi_gpio_request()" to the spi tree Mark Brown
2019-04-03  4:01 ` [PATCH 09/12] spi: gpio: Drop unused pdev field in struct spi_gpio Andrey Smirnov
2019-04-05  3:26   ` Applied "spi: gpio: Drop unused pdev field in struct spi_gpio" to the spi tree Mark Brown
2019-04-03  4:01 ` [PATCH 10/12] spi: gpio: Make sure spi_master_put() is called in every error path Andrey Smirnov
2019-04-08  7:32   ` Applied "spi: gpio: Make sure spi_master_put() is called in every error path" to the spi tree Mark Brown
2019-04-03  4:01 ` [PATCH 11/12] spi: bitbang: Introduce spi_bitbang_init() Andrey Smirnov
2019-04-08  7:32   ` Applied "spi: bitbang: Introduce spi_bitbang_init()" to the spi tree Mark Brown
2019-04-03  4:01 ` [PATCH 12/12] spi: gpio: Use devm_spi_register_master() Andrey Smirnov
2019-04-08  7:32   ` Applied "spi: gpio: Use devm_spi_register_master()" to the spi tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190405032639.3C438441D3B@finisterre.ee.mobilebroadband \
    --to=broonie@kernel.org \
    --cc=andrew.smirnov@gmail.com \
    --cc=cphealy@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).