From: Dan Murphy <dmurphy@ti.com>
To: <robh+dt@kernel.org>, <jacek.anaszewski@gmail.com>,
<pavel@ucw.cz>, <lee.jones@linaro.org>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-leds@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH v2 1/6] dt-bindings: mfd: LMU: Add the ramp up/down property
Date: Fri, 5 Apr 2019 09:28:50 -0500 [thread overview]
Message-ID: <20190405142855.3969-1-dmurphy@ti.com> (raw)
Document the ramp-up and ramp-down property in the binding.
Removing the "sec" from the property definition as seconds is
implied.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
v2 - Fixed commit message as this was not just a modification but adding documentation
https://lore.kernel.org/patchwork/patch/1054504/
.../devicetree/bindings/mfd/ti-lmu.txt | 20 ++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
index 86ca786d54fc..adae96c79d39 100644
--- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -25,6 +25,12 @@ Required properties:
Optional property:
- enable-gpios: A GPIO specifier for hardware enable pin.
+ - ramp-up-ms: Current ramping from one brightness level to
+ the a higher brightness level.
+ Range from 2048 us - 117.44 s
+ - ramp-down-ms: Current ramping from one brightness level to
+ the a lower brightness level.
+ Range from 2048 us - 117.44 s
Required node:
- backlight: All LMU devices have backlight child nodes.
@@ -90,7 +96,7 @@ lm3631@29 {
lcd_bl {
led-sources = <0 1>;
- ramp-up-msec = <300>;
+ ramp-up-ms = <300>;
};
};
};
@@ -152,15 +158,15 @@ lm3633@36 {
main {
label = "main_lcd";
led-sources = <1 2>;
- ramp-up-msec = <500>;
- ramp-down-msec = <500>;
+ ramp-up-ms = <500>;
+ ramp-down-ms = <500>;
};
front {
label = "front_lcd";
led-sources = <0>;
- ramp-up-msec = <1000>;
- ramp-down-msec = <0>;
+ ramp-up-ms = <1000>;
+ ramp-down-ms = <0>;
};
};
@@ -212,8 +218,8 @@ lm3697@36 {
lcd {
led-sources = <0 1 2>;
- ramp-up-msec = <200>;
- ramp-down-msec = <200>;
+ ramp-up-ms = <200>;
+ ramp-down-ms = <200>;
};
};
--
2.19.0
next reply other threads:[~2019-04-05 14:29 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-05 14:28 Dan Murphy [this message]
2019-04-05 14:28 ` [PATCH v2 2/6] dt-bindings: mfd: LMU: Add ti,brightness-resolution Dan Murphy
2019-04-29 17:33 ` Rob Herring
2019-04-05 14:28 ` [PATCH v2 3/6] leds: TI LMU: Add common code for TI LMU devices Dan Murphy
2019-04-05 14:28 ` [PATCH v2 4/6] dt-bindings: ti-lmu: Modify dt bindings for the LM3697 Dan Murphy
2019-04-11 19:48 ` Jacek Anaszewski
2019-04-12 19:34 ` Jacek Anaszewski
2019-04-24 19:24 ` Dan Murphy
2019-04-29 17:34 ` Rob Herring
2019-04-05 14:28 ` [PATCH v2 5/6] mfd: ti-lmu: Remove support for LM3697 Dan Murphy
2019-04-05 14:28 ` [PATCH v2 6/6] leds: lm3697: Introduce the lm3697 driver Dan Murphy
2019-04-29 17:32 ` [PATCH v2 1/6] dt-bindings: mfd: LMU: Add the ramp up/down property Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190405142855.3969-1-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jacek.anaszewski@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).