From: wangyan wang <wangyan.wang@mediatek.com>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, CK Hu <ck.hu@mediatek.com>
Cc: wangyan wang <wangyan.wang@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
chunhui dai <chunhui.dai@mediatek.com>,
Colin Ian King <colin.king@canonical.com>,
Sean Wang <sean.wang@mediatek.com>,
Ryder Lee <ryder.lee@mediatek.com>, <linux-clk@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<dri-devel@lists.freedesktop.org>, <srv_heupstream@mediatek.com>
Subject: [PATCH V10 4/5] drm/mediatek: make implementation of recalc_rate() to match the definition
Date: Tue, 9 Apr 2019 14:53:06 +0800 [thread overview]
Message-ID: <20190409065307.82280-5-wangyan.wang@mediatek.com> (raw)
In-Reply-To: <20190409065307.82280-1-wangyan.wang@mediatek.com>
From: Wangyan Wang <wangyan.wang@mediatek.com>
Recalculate the rate of this clock, by querying hardware to
make implementation of recalc_rate() to match the definition.
Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_hdmi_phy.c | 8 ------
drivers/gpu/drm/mediatek/mtk_hdmi_phy.h | 2 --
drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 39 +++++++++++++++++++++++---
drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 8 ++++++
4 files changed, 43 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
index 0879ce47d4c5..9e153e080739 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
@@ -29,14 +29,6 @@ long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
return rate;
}
-unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
-
- return hdmi_phy->pll_rate;
-}
-
void mtk_hdmi_phy_clear_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
u32 bits)
{
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
index 0045824c1be9..d28b8d5ed2b4 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
@@ -51,8 +51,6 @@ void mtk_hdmi_phy_mask(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw);
long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate);
-unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate);
extern struct platform_driver mtk_hdmi_phy_driver;
extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf;
diff --git a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
index 844e622f052c..b24ea6651db4 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
@@ -79,7 +79,6 @@ static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
usleep_range(80, 100);
mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
- mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
@@ -94,7 +93,6 @@ static void mtk_hdmi_pll_unprepare(struct clk_hw *hw)
mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
- mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
usleep_range(80, 100);
mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
@@ -123,6 +121,7 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_PREDIV_MASK);
mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+ mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IC),
RG_HTPLL_IC_MASK);
mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IR),
@@ -154,6 +153,40 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
return 0;
}
+static unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+ unsigned long out_rate, val;
+
+ val = (readl(hdmi_phy->regs + HDMI_CON6)
+ & RG_HTPLL_PREDIV_MASK) >> RG_HTPLL_PREDIV;
+ switch (val) {
+ case 0x00:
+ out_rate = parent_rate;
+ break;
+ case 0x01:
+ out_rate = parent_rate / 2;
+ break;
+ default:
+ out_rate = parent_rate / 4;
+ break;
+ }
+
+ val = (readl(hdmi_phy->regs + HDMI_CON6)
+ & RG_HTPLL_FBKDIV_MASK) >> RG_HTPLL_FBKDIV;
+ out_rate *= (val + 1) * 2;
+ val = (readl(hdmi_phy->regs + HDMI_CON2)
+ & RG_HDMITX_TX_POSDIV_MASK);
+
+ out_rate >>= (val >> RG_HDMITX_TX_POSDIV);
+
+ if (readl(hdmi_phy->regs + HDMI_CON2) & RG_HDMITX_EN_TX_POSDIV)
+ out_rate = out_rate / 5;
+
+ return out_rate;
+}
+
static const struct clk_ops mtk_hdmi_phy_pll_ops = {
.prepare = mtk_hdmi_pll_prepare,
.unprepare = mtk_hdmi_pll_unprepare,
@@ -174,7 +207,6 @@ static void mtk_hdmi_phy_enable_tmds(struct mtk_hdmi_phy *hdmi_phy)
mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
usleep_range(80, 100);
mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
- mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
@@ -186,7 +218,6 @@ static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
- mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
usleep_range(80, 100);
mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
index f44066875dcd..625739b4e938 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
@@ -285,6 +285,14 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
return 0;
}
+unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+ return hdmi_phy->pll_rate;
+}
+
static const struct clk_ops mtk_hdmi_phy_pll_ops = {
.prepare = mtk_hdmi_pll_prepare,
.unprepare = mtk_hdmi_pll_unprepare,
--
2.14.1
next prev parent reply other threads:[~2019-04-09 6:53 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-09 6:53 [PATCH V10 0/5] make mt7623 clock of hdmi stable wangyan wang
2019-04-09 6:53 ` [PATCH V10 1/5] drm/mediatek: remove flag CLK_SET_RATE_PARENT for mt2701 hdmi phy to not propagate rate change to parent wangyan wang
2019-04-09 6:53 ` [PATCH V10 2/5] drm/mediatek: fix the rate and divder of hdmi phy for MT2701 wangyan wang
2019-04-09 6:53 ` [PATCH V10 3/5] drm/mediatek: using new factor for tvdpll in MT2701 wangyan wang
2019-04-09 6:53 ` wangyan wang [this message]
2019-04-09 6:53 ` [PATCH V10 5/5] drm/mediatek: no change parent rate in round_rate() for mt2701 hdmi phy wangyan wang
2019-04-09 9:55 ` [PATCH V10 0/5] make mt7623 clock of hdmi stable CK Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190409065307.82280-5-wangyan.wang@mediatek.com \
--to=wangyan.wang@mediatek.com \
--cc=airlied@linux.ie \
--cc=chunhui.dai@mediatek.com \
--cc=ck.hu@mediatek.com \
--cc=colin.king@canonical.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=ryder.lee@mediatek.com \
--cc=sboyd@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).