linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lokesh Vutla <lokeshvutla@ti.com>
To: Marc Zyngier <marc.zyngier@arm.com>,
	Tony Lindgren <tony@atomide.com>, Nishanth Menon <nm@ti.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Rob Herring <robh+dt@kernel.org>, <jason@lakedaemon.net>
Cc: Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Device Tree Mailing List <devicetree@vger.kernel.org>,
	Sekhar Nori <nsekhar@ti.com>, Tero Kristo <t-kristo@ti.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>
Subject: [PATCH v6 11/12] irqchip: ti-sci-inta: Add msi domain support
Date: Wed, 10 Apr 2019 09:43:57 +0530	[thread overview]
Message-ID: <20190410041358.16809-12-lokeshvutla@ti.com> (raw)
In-Reply-To: <20190410041358.16809-1-lokeshvutla@ti.com>

Add a msi domain that is child to the INTA domain. Clients
uses the INTA msi bus layer to allocate irqs in this
msi domain.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
Changes since v5:
- New patch. Seperated out msi domain part from the intial patch.

Marc,
	I feel this is too simple to be a separate driver. So I am
	sticking it into the same file.

 drivers/irqchip/Kconfig           |  1 +
 drivers/irqchip/irq-ti-sci-inta.c | 39 ++++++++++++++++++++++++++++++-
 2 files changed, 39 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 946c062fcec0..e0a1ec55ca93 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -441,6 +441,7 @@ config TI_SCI_INTA_IRQCHIP
 	depends on TI_SCI_PROTOCOL && ARCH_K3
 	select IRQ_DOMAIN
 	select IRQ_DOMAIN_HIERARCHY
+	select TI_SCI_INTA_MSI_DOMAIN
 	help
 	  This enables the irqchip driver support for K3 Interrupt aggregator
 	  over TI System Control Interface available on some new TI's SoCs.
diff --git a/drivers/irqchip/irq-ti-sci-inta.c b/drivers/irqchip/irq-ti-sci-inta.c
index 3eb935ebe10f..945e635847b2 100644
--- a/drivers/irqchip/irq-ti-sci-inta.c
+++ b/drivers/irqchip/irq-ti-sci-inta.c
@@ -18,6 +18,7 @@
 #include <linux/irqdomain.h>
 #include <linux/interrupt.h>
 #include <linux/soc/ti/ti_sci_protocol.h>
+#include <linux/soc/ti/ti_sci_inta_msi.h>
 #include <linux/irqchip/chained_irq.h>
 #include <asm-generic/msi.h>
 
@@ -28,6 +29,9 @@
 #define HWIRQ_TO_DEVID(hwirq)	(((hwirq) >> (TI_SCI_DEV_ID_SHIFT)) & \
 				 (TI_SCI_DEV_ID_MASK))
 #define HWIRQ_TO_IRQID(hwirq)	((hwirq) & (TI_SCI_IRQ_ID_MASK))
+#define TO_HWIRQ(dev, index)	((((dev) & TI_SCI_DEV_ID_MASK) << \
+				 TI_SCI_DEV_ID_SHIFT) | \
+				((index) & TI_SCI_IRQ_ID_MASK))
 
 #define MAX_EVENTS_PER_VINT	64
 #define VINT_ENABLE_SET_OFFSET	0x0
@@ -528,9 +532,32 @@ static const struct irq_domain_ops ti_sci_inta_irq_domain_ops = {
 	.free		= ti_sci_inta_irq_domain_free,
 };
 
+static struct irq_chip ti_sci_inta_msi_irq_chip = {
+	.name			= "MSI-INTA",
+	.flags			= IRQCHIP_SUPPORTS_LEVEL_MSI,
+};
+
+static void ti_sci_inta_msi_set_desc(msi_alloc_info_t *arg,
+				     struct msi_desc *desc)
+{
+	arg->desc = desc;
+	arg->hwirq = TO_HWIRQ(desc->inta.dev_id, desc->inta.index);
+}
+
+static struct msi_domain_ops ti_sci_inta_msi_ops = {
+	.set_desc	= ti_sci_inta_msi_set_desc,
+};
+
+static struct msi_domain_info ti_sci_inta_msi_domain_info = {
+	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		   MSI_FLAG_LEVEL_CAPABLE),
+	.ops	= &ti_sci_inta_msi_ops,
+	.chip	= &ti_sci_inta_msi_irq_chip,
+};
+
 static int ti_sci_inta_irq_domain_probe(struct platform_device *pdev)
 {
-	struct irq_domain *parent_domain, *domain;
+	struct irq_domain *parent_domain, *domain, *msi_domain;
 	struct device_node *parent_node, *node;
 	struct ti_sci_inta_irq_domain *inta;
 	struct device *dev = &pdev->dev;
@@ -596,6 +623,16 @@ static int ti_sci_inta_irq_domain_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	msi_domain =
+		ti_sci_inta_msi_create_irq_domain(of_node_to_fwnode(node),
+						  &ti_sci_inta_msi_domain_info,
+						  domain);
+	if (!msi_domain) {
+		irq_domain_remove(domain);
+		dev_err(dev, "Failed to allocate msi domain\n");
+		return -ENOMEM;
+	}
+
 	INIT_LIST_HEAD(&inta->vint_list);
 	mutex_init(&inta->vint_mutex);
 
-- 
2.21.0


  parent reply	other threads:[~2019-04-10  4:16 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-10  4:13 [PATCH v6 00/12] Add support for TISCI Interrupt controller drivers Lokesh Vutla
2019-04-10  4:13 ` [PATCH v6 01/12] firmware: ti_sci: Add support to get TISCI handle using of_phandle Lokesh Vutla
2019-04-10  4:13 ` [PATCH v6 02/12] firmware: ti_sci: Add support for RM core ops Lokesh Vutla
2019-04-10  4:13 ` [PATCH v6 03/12] firmware: ti_sci: Add support for IRQ management Lokesh Vutla
2019-04-10  4:13 ` [PATCH v6 04/12] firmware: ti_sci: Add RM mapping table for am654 Lokesh Vutla
2019-04-11 14:54   ` Tony Lindgren
2019-04-12  4:08     ` Lokesh Vutla
2019-04-12 15:20       ` Tony Lindgren
2019-04-10  4:13 ` [PATCH v6 05/12] firmware: ti_sci: Add helper apis to manage resources Lokesh Vutla
2019-04-10  4:13 ` [PATCH v6 06/12] dt-bindings: irqchip: Introduce TISCI Interrupt router bindings Lokesh Vutla
2019-04-11 15:00   ` Tony Lindgren
2019-04-12  4:24     ` Lokesh Vutla
2019-04-12  8:42       ` Tero Kristo
2019-04-12 15:33         ` Tony Lindgren
2019-04-10  4:13 ` [PATCH v6 07/12] irqchip: ti-sci-intr: Add support for Interrupt Router driver Lokesh Vutla
2019-04-10  4:13 ` [PATCH v6 08/12] dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings Lokesh Vutla
2019-04-10  4:13 ` [PATCH v6 09/12] irqchip: ti-sci-inta: Add support for Interrupt Aggregator driver Lokesh Vutla
2019-04-17 11:16   ` Lokesh Vutla
2019-04-17 14:14   ` Marc Zyngier
2019-04-17 16:42     ` Lokesh Vutla
2019-04-10  4:13 ` [PATCH v6 10/12] soc: ti: Add MSI domain bus support for Interrupt Aggregator Lokesh Vutla
2019-04-17 16:34   ` Marc Zyngier
2019-04-17 16:59     ` Lokesh Vutla
2019-04-17 17:06       ` Marc Zyngier
2019-04-17 17:08         ` Lokesh Vutla
2019-04-10  4:13 ` Lokesh Vutla [this message]
2019-04-10  4:13 ` [PATCH v6 12/12] soc: ti: am6: Enable interrupt controller driver Lokesh Vutla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190410041358.16809-12-lokeshvutla@ti.com \
    --to=lokeshvutla@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=grygorii.strashko@ti.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=peter.ujfalusi@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).