From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, Axel Lin <axel.lin@ingics.com>
Subject: [PATCH 1/2] regulator: ab8500: Constify regulator_ops
Date: Fri, 12 Apr 2019 22:11:57 +0800 [thread overview]
Message-ID: <20190412141158.21246-1-axel.lin@ingics.com> (raw)
These regulator_ops variables never need to be modified, make them const so
compiler can put them to .rodata.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/ab8500.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 83dba3fbfe0c..6b9a3463f1fd 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -510,7 +510,7 @@ static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
return ret;
}
-static struct regulator_ops ab8500_regulator_volt_mode_ops = {
+static const struct regulator_ops ab8500_regulator_volt_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
@@ -522,7 +522,7 @@ static struct regulator_ops ab8500_regulator_volt_mode_ops = {
.list_voltage = regulator_list_voltage_table,
};
-static struct regulator_ops ab8500_regulator_volt_ops = {
+static const struct regulator_ops ab8500_regulator_volt_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
@@ -531,7 +531,7 @@ static struct regulator_ops ab8500_regulator_volt_ops = {
.list_voltage = regulator_list_voltage_table,
};
-static struct regulator_ops ab8500_regulator_mode_ops = {
+static const struct regulator_ops ab8500_regulator_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
@@ -541,14 +541,14 @@ static struct regulator_ops ab8500_regulator_mode_ops = {
.list_voltage = regulator_list_voltage_table,
};
-static struct regulator_ops ab8500_regulator_ops = {
+static const struct regulator_ops ab8500_regulator_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.list_voltage = regulator_list_voltage_table,
};
-static struct regulator_ops ab8500_regulator_anamic_mode_ops = {
+static const struct regulator_ops ab8500_regulator_anamic_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
--
2.17.1
next reply other threads:[~2019-04-12 14:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-12 14:11 Axel Lin [this message]
2019-04-12 14:11 ` [PATCH 2/2] regulator: ab8500: Remove *regulator from struct ab8500_regulator_info Axel Lin
2019-04-15 8:53 ` Applied "regulator: ab8500: Remove *regulator from struct ab8500_regulator_info" to the regulator tree Mark Brown
2019-04-23 9:08 ` [PATCH 2/2] regulator: ab8500: Remove *regulator from struct ab8500_regulator_info Linus Walleij
2019-04-15 8:53 ` Applied "regulator: ab8500: Constify regulator_ops" to the regulator tree Mark Brown
2019-04-23 9:07 ` [PATCH 1/2] regulator: ab8500: Constify regulator_ops Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190412141158.21246-1-axel.lin@ingics.com \
--to=axel.lin@ingics.com \
--cc=broonie@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).